# Makefile.in -- # # This file is a Makefile for Sample TEA Extension. If it has the name # "Makefile.in" then it is a template for a Makefile; to generate the # actual Makefile, run "./configure", which is a configuration script # generated by the "autoconf" program (constructs like "@foo@" will get # replaced in the actual Makefile. # # Copyright (c) 1999 Scriptics Corporation. # # See the file "license.terms" for information on usage and redistribution # of this file, and for a DISCLAIMER OF ALL WARRANTIES. # # RCS: @(#) $Id: Makefile.in,v 1.16 2006/12/21 17:26:53 tkgeomap Exp $ #======================================================================== # Edit the following few lines when writing a new extension #======================================================================== #======================================================================== # Change the name of the variable "exampleA_LIB_FILE" to match the one # used in the configure script. This is the parameterized name of the # library that we are building. #======================================================================== lib_BINARIES=$(tkgeomap_LIB_FILE) BINARIES=$(lib_BINARIES) #======================================================================== # Enumerate the names of the source files included in this package. # This will be used when a dist target is added to the Makefile. #======================================================================== TOP_DIR = $(srcdir)/.. TK_DIR = $(TOP_DIR)/tk tkgeomap_SOURCES = $(TK_DIR)/tkgeomap.c $(TK_DIR)/tkgeomapPlace.c \ $(TK_DIR)/tkgeomapLnArr.c $(TK_DIR)/tkTrig.c SOURCES = $(tkgeomap_SOURCES) #======================================================================== # Enumerate the names of the object files included in this package. # These objects are created and linked into the final library. In # most cases these object files will correspond to the source files # above. # #======================================================================== tkgeomap_OBJECTS = tkgeomap.o tkgeomapPlace.o tkgeomapLnArr.o tkTrig.o PKG_OBJECTS = $(tkgeomap_OBJECTS) #======================================================================== # The substitution of "exampleA_LIB_FILE" into the variable name below # let's us refer to the objects for the library without knowing the name # of the library in advance. It also lets us use the "$@" variable in # the rule for building the library, so we can refer to both the list of # objects and the library itself in a platform-independent manner. #======================================================================== tkgeomap_LIB_FILE = @tkgeomap_LIB_FILE@ $(tkgeomap_LIB_FILE)_OBJECTS = $(tkgeomap_OBJECTS) #======================================================================== # This is a list of header files to be installed #======================================================================== GENERIC_HDRS= $(TK_DIR)/tkgeomap.h $(TK_DIR)/tkgeomapInt.h #======================================================================== # Add additional lines to handle any additional AC_SUBST cases that # have been added to the configure script. #======================================================================== SAMPLE_NEW_VAR=@SAMPLE_NEW_VAR@ #======================================================================== # Nothing of the variables below this line need to be changed. Please # check the TARGETS section below to make sure the make targets are # correct. #======================================================================== SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include # Directory in which to install manual entries for the built-in # Tcl commands: MANN_INSTALL_DIR = $(mandir)/mann # Path to use at runtime to refer to LIB_INSTALL_DIR: LIB_RUNTIME_DIR = $(libdir) # support for embedded libraries on Darwin / Mac OS X DYLIB_INSTALL_DIR = ${LIB_RUNTIME_DIR} pkgdatadir = $(datadir)/@PACKAGE_NAME@ pkglibdir = $(libdir)/@PACKAGE_NAME@ pkgincludedir = $(includedir)/@PACKAGE_NAME@ top_builddir = . INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_FLAG = transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_VERSION = CC = @CC@ CFLAGS_DEBUG = @CFLAGS_DEBUG@ CFLAGS_DEFAULT = @CFLAGS_DEFAULT@ CFLAGS_OPTIMIZE = @CFLAGS_OPTIMIZE@ CLEANFILES = @CLEANFILES@ EXEEXT = @EXEEXT@ LDFLAGS_DEBUG = @LDFLAGS_DEBUG@ LDFLAGS_DEFAULT = @LDFLAGS_DEFAULT@ LDFLAGS_OPTIMIZE = @LDFLAGS_OPTIMIZE@ MAKE_LIB = @MAKE_LIB@ MAKE_SHARED_LIB = @MAKE_SHARED_LIB@ MAKE_STATIC_LIB = @MAKE_STATIC_LIB@ OBJEXT = @OBJEXT@ RANLIB = @RANLIB@ SHLIB_CFLAGS = @SHLIB_CFLAGS@ SHLIB_LD = @SHLIB_LD@ SHLIB_LDFLAGS = @SHLIB_LDFLAGS@ SHLIB_LD_LIBS = @TCLGEOMAP_LIB_SPEC@ @SHLIB_LD_LIBS@ TK_SHLIB_LD_EXTRAS = @TK_SHLIB_LD_EXTRAS@ STLIB_LD = @STLIB_LD@ TCL_BIN_DIR = @TCL_BIN_DIR@ TCL_DEFS = @TCL_DEFS@ TCL_EXTRA_CFLAGS = @TCL_EXTRA_CFLAGS@ TCL_LD_FLAGS = @TCL_LD_FLAGS@ TCL_LIBS = @TCL_LIBS@ TCL_SHLIB_LD_LIBS = @TCL_SHLIB_LD_LIBS@ TCL_SRC_DIR = @TCL_SRC_DIR@ TCL_DBGX = @TCL_DBGX@ TCL_STUB_LIB_FILE = @TCL_STUB_LIB_FILE@ TCL_STUB_LIB_SPEC = @TCL_STUB_LIB_SPEC@ TCL_TOOL_DIR_NATIVE = @TCL_TOOL_DIR_NATIVE@ TCL_TOP_DIR_NATIVE = @TCL_TOP_DIR_NATIVE@ TCL_UNIX_DIR_NATIVE = @TCL_UNIX_DIR_NATIVE@ TCL_WIN_DIR_NATIVE = @TCL_WIN_DIR_NATIVE@ INCLUDE_DIR_NATIVE = @INCLUDE_DIR_NATIVE@ TCL_BMAP_DIR_NATIVE = @TCL_BMAP_DIR_NATIVE@ TCL_PLATFORM_DIR_NATIVE = @TCL_PLATFORM_DIR_NATIVE@ TCL_GENERIC_DIR_NATIVE = @TCL_GENERIC_DIR_NATIVE@ WISH_PROG = @WISH_PROG@ AUTOCONF = autoconf LDFLAGS = $(LDFLAGS_DEFAULT) INCLUDES = @TK_INCLUDES@ @TK_XINCLUDES@ @TCL_INCLUDES@ @TCLGEOMAP_INCLUDES@ -I$(TK_DIR) EXTRA_CFLAGS = $(TCL_DEFS) $(PROTO_FLAGS) $(SECURITY_FLAGS) $(MEM_DEBUG_FLAGS) $(KEYSYM_FLAGS) $(NO_DEPRECATED_FLAGS) @PACKAGE_CFLAGS@ DEFS = @DEFS@ $(EXTRA_CFLAGS) ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_CLEAN_FILES = pkgIndex.tcl CPPFLAGS = @CPPFLAGS@ LIBS = @PKG_LIBS@ @LIBS@ AR = ar CFLAGS = @CFLAGS@ COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -DUSE_COMPAT_CONST CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ #======================================================================== # Start of user-definable TARGETS section #======================================================================== #======================================================================== # TEA TARGETS. Please note that the "libraries:" target refers to platform # independent files, and the "binaries:" target inclues executable programs and # platform-dependent libraries. Modify these targets so that they install # the various pieces of your package. The make and install rules # for the BINARIES that you specified above have already been done. #======================================================================== all: libraries binaries doc #======================================================================== # The binaries target builds executable programs, Windows .dll's, unix # shared/static libraries, and any other platform-dependent files. # The list of targets to build for "binaries:" is specified at the top # of the Makefile, in the "BINARIES" variable. #======================================================================== binaries: $(BINARIES) libraries: doc: install: all install-libraries install-binaries install-doc install-binaries: binaries install-lib-binaries install-bin-binaries #======================================================================== # This rule installs platform-independent files, such as header files. #======================================================================== install-libraries: libraries $(mkinstalldirs) $(includedir) $(mkinstalldirs) $(pkgincludedir) echo "Installing header files in $(pkgincludedir)" @for i in $(GENERIC_HDRS) ; do \ echo "Installing $$i" ; \ $(INSTALL_DATA) $$i $(pkgincludedir) ; \ done; @for i in `ls $(pkgincludedir)` ; do \ rm -f $(includedir)/$$i ; \ done; $(mkinstalldirs) $(pkglibdir) echo "Installing library script files in $(pkglibdir)" $(INSTALL_DATA) $(TOP_DIR)/library/tkgeomap_procs.tcl $(pkglibdir) $(INSTALL_DATA) $(TOP_DIR)/library/wdgeomap.tcl $(pkglibdir) #======================================================================== # Install documentation. Unix manpages should go in the $(mandir) # directory. #======================================================================== install-doc: doc @if test ! -x $(srcdir)/mkLinks; then \ chmod +x $(srcdir)/mkLinks; \ fi @for i in $(mandir) $(MANN_INSTALL_DIR) ; \ do \ if [ ! -d $$i ] ; then \ echo "Making directory $$i"; \ mkdir -p $$i; \ chmod 755 $$i; \ else true; \ fi; \ done; @echo "Installing command (.n) docs"; @cd $(TOP_DIR)/doc; for i in *.n; \ do \ rm -f $(MANN_INSTALL_DIR)/$$i; \ sed -e '/man\.macros/r man.macros' -e '/man\.macros/d' \ $$i > $(MANN_INSTALL_DIR)/$$i; \ chmod 444 $(MANN_INSTALL_DIR)/$$i; \ done; @echo "Cross-linking command (.n) docs"; @$(srcdir)/mkLinks $(MKLINKS_FLAGS) $(MANN_INSTALL_DIR) test: depend: #======================================================================== # Enumerate the names of the object files included in this package. # These objects are created and linked into the final library. In # most cases these object files will correspond to the source files # above. # # $(exampleA_LIB_FILE) should be listed as part of the BINARIES variable # at the top of the Makefile. That will ensure that this target is built # when you run "make binaries". # # You shouldn't need to modify this target, except to change the package # name from "exampleA" to your package's name. #======================================================================== $(tkgeomap_LIB_FILE): $(tkgeomap_OBJECTS) -rm -f $(tkgeomap_LIB_FILE) @MAKE_LIB@ $(RANLIB) $(tkgeomap_LIB_FILE) #======================================================================== # We need to enumerate the list of .c to .o lines here. # Unfortunately, there does not seem to be any other way to do this # in a Makefile-independent way. We can't use VPATH because it picks up # object files that may be located in the source directory. # # In the following lines, $(srcdir) refers to the toplevel directory # containing your extension. If your sources are in a subdirectory, # you will have to modify the paths to reflect this: # # exampleA.$(OBJEXT): $(srcdir)/src/win/exampleA.c # $(COMPILE) -c `@CYGPATH@ $(srcdir)/src/win/exampleA.c` -o $@ #======================================================================== tkgeomap.o : $(TK_DIR)/tkgeomap.c $(TK_DIR)/tkgeomap.h \ $(TK_DIR)/tkgeomapInt.h $(COMPILE) -c `@CYGPATH@ $(TK_DIR)/tkgeomap.c` -o $@ tkgeomapPlace.o : $(TK_DIR)/tkgeomapPlace.c $(TK_DIR)/tkgeomap.h \ $(TK_DIR)/tkgeomapInt.h $(COMPILE) -c `@CYGPATH@ $(TK_DIR)/tkgeomapPlace.c` -o $@ tkgeomapLnArr.o : $(TK_DIR)/tkgeomapLnArr.c $(TK_DIR)/tkgeomap.h \ $(TK_DIR)/tkgeomapInt.h $(COMPILE) -c `@CYGPATH@ $(TK_DIR)/tkgeomapLnArr.c` -o $@ tkTrig.o : $(TK_DIR)/tkTrig.c $(TK_DIR)/tkgeomap.h \ $(TK_DIR)/tkgeomapInt.h $(COMPILE) -c `@CYGPATH@ $(TK_DIR)/tkTrig.c` -o $@ #======================================================================== # End of user-definable section #======================================================================== #======================================================================== # Don't modify the file to clean here. Instead, set the "CLEANFILES" # variable in configure.in #======================================================================== clean: -test -z "$(BINARIES)" || rm -f $(BINARIES) -rm -f *.o core *.core -rm -f *.$(OBJEXT) -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean: clean -rm -f *.tab.c -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* -rm -f config.status #======================================================================== # Install binary object libraries. On Windows this includes both .dll and # .lib files. Because the .lib files are not explicitly listed anywhere, # we need to deduce their existence from the .dll file of the same name. # Additionally, the .dll files go into the bin directory, but the .lib # files go into the lib directory. On Unix platforms, all library files # go into the lib directory. In addition, this will generate the pkgIndex.tcl # file in the install location (assuming it can find a usable wish shell) # # You should not have to modify this target. #======================================================================== install-lib-binaries: installdirs @list='$(lib_BINARIES)'; for p in $$list; do \ if test -f $$p; then \ ext=`echo $$p|sed -e "s/.*\.//"`; \ if test "x$$ext" = "xdll"; then \ echo " $(INSTALL_DATA) $$p $(bindir)/$$p"; \ $(INSTALL_DATA) $$p $(bindir)/$$p; \ lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \ if test -f $$lib; then \ echo " $(INSTALL_DATA) $$lib $(libdir)/$$lib"; \ $(INSTALL_DATA) $$lib $(libdir)/$$lib; \ fi; \ else \ echo " $(INSTALL_DATA) $$p $(libdir)/$$p"; \ $(INSTALL_DATA) $$p $(libdir)/$$p; \ fi; \ else :; fi; \ done @list='$(lib_BINARIES)'; for p in $$list; do \ if test -f $$p; then \ echo " $(RANLIB) $(libdir)/$$p"; \ $(RANLIB) $(libdir)/$$p; \ else :; fi; \ done $(INSTALL_DATA) pkgIndex.tcl $(pkglibdir) #======================================================================== # Install binary executables (e.g. .exe files) # # You should not have to modify this target. #======================================================================== install-bin-binaries: installdirs @list='$(bin_BINARIES)'; for p in $$list; do \ if test -f $$p; then \ echo " $(INSTALL_DATA) $$p $(bindir)/$$p"; \ $(INSTALL_DATA) $$p $(bindir)/$$p; \ else :; fi; \ done .SUFFIXES: .c .o .obj Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) uninstall-binaries: @$(NORMAL_UNINSTALL) list='$(BINARIES)'; for p in $$list; do \ rm -f $(libdir)/$$p; \ done installdirs: $(mkinstalldirs) $(libdir) $(mkinstalldirs) $(bindir) $(mkinstalldirs) $(pkglibdir) .PHONY: all binaries clean depend distclean doc install installdirs \ libraries test # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: