# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # Copyright (c) 2004, Theodore A. Roth # Copyright (c) 2005, 2008 Anatoly Sokolov # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are met: # # * Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # * Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with the # distribution. # * Neither the name of the copyright holders nor the names of # contributors may be used to endorse or promote products derived # from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # Copyright (c) 2002, Reinhard Jessich # Copyright (c) 2009 Dmitry Xmelkov # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are met: # # * Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # * Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with the # distribution. # * Neither the name of the copyright holders nor the names of # contributors may be used to endorse or promote products derived # from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # $Id: Rules.am 2475 2015-05-07 06:45:38Z pitchumani $ # Copyright (c) 2004,2009 Theodore A. Roth # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are met: # # * Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # * Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with the # distribution. # * Neither the name of the copyright holders nor the names of # contributors may be used to endorse or promote products derived # from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # $Id: Files.am 2298 2012-07-29 15:30:34Z dmix $ # am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = avr/lib/avr5/atmega649p ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(avrdir)" "$(DESTDIR)$(avrdir)" LIBRARIES = $(avr_LIBRARIES) $(noinst_LIBRARIES) ARFLAGS = cru AM_V_AR = $(am__v_AR_@AM_V@) am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@) am__v_AR_0 = @echo " AR " $@; am__v_AR_1 = libatmega649p_a_AR = $(AR) $(ARFLAGS) libatmega649p_a_LIBADD = @HAS_DEV_LIB_TRUE@am__objects_1 = eerd_block.$(OBJEXT) \ @HAS_DEV_LIB_TRUE@ eerd_byte.$(OBJEXT) eerd_dword.$(OBJEXT) \ @HAS_DEV_LIB_TRUE@ eerd_word.$(OBJEXT) eeupd_block.$(OBJEXT) \ @HAS_DEV_LIB_TRUE@ eeupd_byte.$(OBJEXT) eeupd_dword.$(OBJEXT) \ @HAS_DEV_LIB_TRUE@ eeupd_word.$(OBJEXT) eewr_block.$(OBJEXT) \ @HAS_DEV_LIB_TRUE@ eewr_byte.$(OBJEXT) eewr_dword.$(OBJEXT) \ @HAS_DEV_LIB_TRUE@ eewr_word.$(OBJEXT) @HAS_DEV_LIB_TRUE@@HAS_GCC_5_1_FALSE@@HAS_atmega649p_TRUE@nodist_libatmega649p_a_OBJECTS = $(am__objects_1) libatmega649p_a_OBJECTS = $(nodist_libatmega649p_a_OBJECTS) libcrt_a_AR = $(AR) $(ARFLAGS) libcrt_a_LIBADD = @HAS_atmega649p_TRUE@nodist_libcrt_a_OBJECTS = gcrt1.$(OBJEXT) libcrt_a_OBJECTS = $(nodist_libcrt_a_OBJECTS) libdev_a_AR = $(AR) $(ARFLAGS) libdev_a_LIBADD = @HAS_DEV_LIB_TRUE@@HAS_GCC_5_1_TRUE@@HAS_atmega649p_TRUE@nodist_libdev_a_OBJECTS = $(am__objects_1) libdev_a_OBJECTS = $(nodist_libdev_a_OBJECTS) AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) AM_V_CPPAS = $(am__v_CPPAS_@AM_V@) am__v_CPPAS_ = $(am__v_CPPAS_@AM_DEFAULT_V@) am__v_CPPAS_0 = @echo " CPPAS " $@; am__v_CPPAS_1 = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) AM_V_CC = $(am__v_CC_@AM_V@) am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) am__v_CC_0 = @echo " CC " $@; am__v_CC_1 = CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CCLD = $(am__v_CCLD_@AM_V@) am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) am__v_CCLD_0 = @echo " CCLD " $@; am__v_CCLD_1 = SOURCES = $(nodist_libatmega649p_a_SOURCES) $(nodist_libcrt_a_SOURCES) \ $(nodist_libdev_a_SOURCES) DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac DATA = $(avr_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp \ $(top_srcdir)/libc/misc/Files.am \ $(top_srcdir)/libc/misc/Rules.am DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) VPATH = $(top_srcdir)/crt1:$(top_srcdir)/libc/misc ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AS = @AS@ ASDEBUG = @ASDEBUG@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AVR_LIBC_MAJOR = @AVR_LIBC_MAJOR@ AVR_LIBC_MINOR = @AVR_LIBC_MINOR@ AVR_LIBC_RELDATE = @AVR_LIBC_RELDATE@ AVR_LIBC_REVISION = @AVR_LIBC_REVISION@ AVR_LIBC_USER_MANUAL = @AVR_LIBC_USER_MANUAL@ AVR_LIBC_VERSION = @AVR_LIBC_VERSION@ AVR_LIBC_VERSION_NUMERIC = @AVR_LIBC_VERSION_NUMERIC@ AWK = @AWK@ CC = @CC@ CCAS = @CCAS@ CCASDEPMODE = @CCASDEPMODE@ CCASFLAGS = @CCASFLAGS@ CCDEPMODE = @CCDEPMODE@ CDEBUG = @CDEBUG@ CFLAGS = @CFLAGS@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DOCSDIR = @DOCSDIR@ DOC_INST_DIR = @DOC_INST_DIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EXEEXT = @EXEEXT@ FNO_JUMP_TABLES = @FNO_JUMP_TABLES@ HAS_DELAY_CYCLES = @HAS_DELAY_CYCLES@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_DOX_HTML = @INSTALL_DOX_HTML@ INSTALL_DOX_MAN = @INSTALL_DOX_MAN@ INSTALL_DOX_PDF = @INSTALL_DOX_PDF@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PNGTOPNM = @PNGTOPNM@ PNMTOPNG = @PNMTOPNG@ RANLIB = @RANLIB@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ TARGET_DOX_HTML = @TARGET_DOX_HTML@ TARGET_DOX_PDF = @TARGET_DOX_PDF@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AVR_TARGET = atmega649p @HAS_DEV_LIB_FALSE@AVR_TARGET_CRT = crtm649p.o # avr-gcc > 5.1.0 expects crt file as crt.o and # device library in multi-lib directory itself @HAS_DEV_LIB_TRUE@@HAS_GCC_5_1_FALSE@AVR_TARGET_CRT = crtatmega649p.o # avr-gcc 5.1.0 expects crt file as crt1.o and # device library in dev directory @HAS_DEV_LIB_TRUE@@HAS_GCC_5_1_TRUE@AVR_TARGET_CRT = crt1.o @HAS_DEV_LIB_FALSE@AVR_INSTALL_DIR = avr5 @HAS_DEV_LIB_TRUE@@HAS_GCC_5_1_FALSE@AVR_INSTALL_DIR = avr5 @HAS_DEV_LIB_TRUE@@HAS_GCC_5_1_TRUE@AVR_INSTALL_DIR = dev/atmega649p AVR_TARGET_DEFS = AVR_TARGET_CFLAGS = -mcall-prologues -Os AVR_TARGET_ASFLAGS = @HAS_DEV_LIB_TRUE@misc_a_c_sources = @HAS_DEV_LIB_TRUE@eeprom_asm_sources = \ @HAS_DEV_LIB_TRUE@ eerd_block.S \ @HAS_DEV_LIB_TRUE@ eerd_byte.S \ @HAS_DEV_LIB_TRUE@ eerd_dword.S \ @HAS_DEV_LIB_TRUE@ eerd_word.S \ @HAS_DEV_LIB_TRUE@ eeupd_block.S \ @HAS_DEV_LIB_TRUE@ eeupd_byte.S \ @HAS_DEV_LIB_TRUE@ eeupd_dword.S \ @HAS_DEV_LIB_TRUE@ eeupd_word.S \ @HAS_DEV_LIB_TRUE@ eewr_block.S \ @HAS_DEV_LIB_TRUE@ eewr_byte.S \ @HAS_DEV_LIB_TRUE@ eewr_dword.S \ @HAS_DEV_LIB_TRUE@ eewr_word.S @HAS_DEV_LIB_TRUE@misc_a_asm_sources = \ @HAS_DEV_LIB_TRUE@ itoa.S \ @HAS_DEV_LIB_TRUE@ itoa_ncheck.S \ @HAS_DEV_LIB_TRUE@ ltoa.S \ @HAS_DEV_LIB_TRUE@ ltoa_ncheck.S \ @HAS_DEV_LIB_TRUE@ mulsi10.S \ @HAS_DEV_LIB_TRUE@ mul10.S \ @HAS_DEV_LIB_TRUE@ ultoa.S \ @HAS_DEV_LIB_TRUE@ ultoa_ncheck.S \ @HAS_DEV_LIB_TRUE@ utoa.S \ @HAS_DEV_LIB_TRUE@ utoa_ncheck.S @HAS_DEV_LIB_TRUE@misc_a_extra_dist = \ @HAS_DEV_LIB_TRUE@ eedef.h \ @HAS_DEV_LIB_TRUE@ readme_eeprom.txt @HAS_atmega649p_TRUE@AM_CPPFLAGS = -I$(top_srcdir)/common -I$(top_srcdir)/include -I$(top_builddir)/include @HAS_atmega649p_TRUE@AVRLIB_CFLAGS = @CDEBUG@ -Wall -W -Wstrict-prototypes -mmcu=$(AVR_TARGET) $(AVR_TARGET_DEFS) $(AVR_TARGET_CFLAGS) @HAS_atmega649p_TRUE@AVRLIB_ASFLAGS = -x assembler-with-cpp @ASDEBUG@ -mmcu=$(AVR_TARGET) $(AVR_TARGET_DEFS) -DIOSYMFILE=\"iosym/$(AVR_TARGET).S\" $(AVR_TARGET_ASFLAGS) @HAS_atmega649p_TRUE@AM_CFLAGS = $(AVRLIB_CFLAGS) @HAS_atmega649p_TRUE@AM_CCASFLAGS = $(AM_CPPFLAGS) $(AVRLIB_ASFLAGS) @HAS_atmega649p_TRUE@__install_dir = $(prefix)/avr/lib/$(AVR_INSTALL_DIR) @HAS_atmega649p_TRUE@avrdir = $(__install_dir) @HAS_atmega649p_TRUE@avrlibdir = $(__install_dir) @HAS_atmega649p_TRUE@noinst_LIBRARIES = libcrt.a @HAS_atmega649p_TRUE@nodist_libcrt_a_SOURCES = gcrt1.S # avr-gcc > 5.1.0 expects device library as lib.a @HAS_DEV_LIB_TRUE@@HAS_GCC_5_1_FALSE@@HAS_atmega649p_TRUE@avr_LIBRARIES = libatmega649p.a # avr-gcc 5.1.0 expects device library as libdev.a @HAS_DEV_LIB_TRUE@@HAS_GCC_5_1_TRUE@@HAS_atmega649p_TRUE@avr_LIBRARIES = libdev.a @HAS_DEV_LIB_TRUE@@HAS_GCC_5_1_TRUE@@HAS_atmega649p_TRUE@nodist_libdev_a_SOURCES = $(eeprom_asm_sources) @HAS_DEV_LIB_TRUE@@HAS_GCC_5_1_FALSE@@HAS_atmega649p_TRUE@nodist_libatmega649p_a_SOURCES = $(eeprom_asm_sources) @HAS_atmega649p_TRUE@avr_DATA = $(AVR_TARGET_CRT) all: all-am .SUFFIXES: .SUFFIXES: .S .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/libc/misc/Rules.am $(top_srcdir)/libc/misc/Files.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign avr/lib/avr5/atmega649p/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign avr/lib/avr5/atmega649p/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_srcdir)/libc/misc/Rules.am $(top_srcdir)/libc/misc/Files.am $(am__empty): $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-avrLIBRARIES: $(avr_LIBRARIES) @$(NORMAL_INSTALL) @list='$(avr_LIBRARIES)'; test -n "$(avrdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(MKDIR_P) '$(DESTDIR)$(avrdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(avrdir)" || exit 1; \ echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(avrdir)'"; \ $(INSTALL_DATA) $$list2 "$(DESTDIR)$(avrdir)" || exit $$?; } @$(POST_INSTALL) @list='$(avr_LIBRARIES)'; test -n "$(avrdir)" || list=; \ for p in $$list; do \ if test -f $$p; then \ $(am__strip_dir) \ echo " ( cd '$(DESTDIR)$(avrdir)' && $(RANLIB) $$f )"; \ ( cd "$(DESTDIR)$(avrdir)" && $(RANLIB) $$f ) || exit $$?; \ else :; fi; \ done uninstall-avrLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(avr_LIBRARIES)'; test -n "$(avrdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(avrdir)'; $(am__uninstall_files_from_dir) clean-avrLIBRARIES: -test -z "$(avr_LIBRARIES)" || rm -f $(avr_LIBRARIES) clean-noinstLIBRARIES: -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) libatmega649p.a: $(libatmega649p_a_OBJECTS) $(libatmega649p_a_DEPENDENCIES) $(EXTRA_libatmega649p_a_DEPENDENCIES) $(AM_V_at)-rm -f libatmega649p.a $(AM_V_AR)$(libatmega649p_a_AR) libatmega649p.a $(libatmega649p_a_OBJECTS) $(libatmega649p_a_LIBADD) $(AM_V_at)$(RANLIB) libatmega649p.a libcrt.a: $(libcrt_a_OBJECTS) $(libcrt_a_DEPENDENCIES) $(EXTRA_libcrt_a_DEPENDENCIES) $(AM_V_at)-rm -f libcrt.a $(AM_V_AR)$(libcrt_a_AR) libcrt.a $(libcrt_a_OBJECTS) $(libcrt_a_LIBADD) $(AM_V_at)$(RANLIB) libcrt.a libdev.a: $(libdev_a_OBJECTS) $(libdev_a_DEPENDENCIES) $(EXTRA_libdev_a_DEPENDENCIES) $(AM_V_at)-rm -f libdev.a $(AM_V_AR)$(libdev_a_AR) libdev.a $(libdev_a_OBJECTS) $(libdev_a_LIBADD) $(AM_V_at)$(RANLIB) libdev.a mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eerd_block.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eerd_byte.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eerd_dword.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eerd_word.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eeupd_block.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eeupd_byte.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eeupd_dword.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eeupd_word.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eewr_block.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eewr_byte.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eewr_dword.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eewr_word.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gcrt1.Po@am__quote@ .S.o: @am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)$(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCCAS_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(CPPASCOMPILE) -c -o $@ $< .S.obj: @am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)$(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCCAS_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` install-avrDATA: $(avr_DATA) @$(NORMAL_INSTALL) @list='$(avr_DATA)'; test -n "$(avrdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(avrdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(avrdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(avrdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(avrdir)" || exit $$?; \ done uninstall-avrDATA: @$(NORMAL_UNINSTALL) @list='$(avr_DATA)'; test -n "$(avrdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(avrdir)'; $(am__uninstall_files_from_dir) ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-am TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-am CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-am cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LIBRARIES) $(DATA) installdirs: for dir in "$(DESTDIR)$(avrdir)" "$(DESTDIR)$(avrdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-avrLIBRARIES clean-generic clean-noinstLIBRARIES \ mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-avrDATA install-avrLIBRARIES install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-avrDATA uninstall-avrLIBRARIES .MAKE: install-am install-strip .PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \ clean-avrLIBRARIES clean-generic clean-noinstLIBRARIES \ cscopelist-am ctags ctags-am distclean distclean-compile \ distclean-generic distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-avrDATA \ install-avrLIBRARIES install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \ tags tags-am uninstall uninstall-am uninstall-avrDATA \ uninstall-avrLIBRARIES .PRECIOUS: Makefile # vim: set ft=make: # Example of '-mmcu' arg generation: # $@ --> eerd_byte_atmega48.o # basename --> eerd_byte_atmega48 # subst --> eerd byte atmega48 # lastword --> atmega48 # # Example of source file generation: # $@ --> eerd_byte_atmega48.o # basename --> eerd_byte_atmega48 # subst --> eerd.byte.atmega48 # basename --> eerd.byte # subst --> eerd_byte # addsuffix --> eerd_byte.S # #$(eeprom_asm_objlist): $(eeprom_asm_sources) # $(filter-out -mmcu=%,$(COMPILE) $(AVRLIB_ASFLAGS)) -c -o $@ \ # -mmcu=$(lastword $(subst _, ,$(basename $@))) \ # $(