MKVToolNix - en to zh_TW translation catalogue (355 entries)

note: type: Attribute 'lang' of: <refentry>
en: en
zh_TW: zh-hant

note: type: Content of: <refentry><refentryinfo><authorgroup><author><contrib>
en: Developer
zh_TW: 開發人員

note: type: Content of: <refentry><refmeta><refmiscinfo>
en: User Commands
zh_TW: 使用者命令

note: type: Content of: <refentry><refnamediv><refpurpose>
en: extract tracks from &matroska; files into other files
zh_TW: 將 &matroska; 軌道檔案擷取至其他檔案

note: type: Content of: <refentry><refsynopsisdiv><title>
en: Synopsis
zh_TW: 概要

note: type: Content of: <refentry><refsynopsisdiv><cmdsynopsis>
en: <command>mkvextract</command> <arg choice="req">source-filename</arg> <arg choice="req">mode1</arg> <arg>options</arg> <arg>extraction-spec1</arg> <arg>mode2</arg> <arg>options</arg> <arg>extraction-spec2</arg> <arg>…</arg>
zh_TW: <command>mkvextract</command> <arg choice="req">輸入檔名</arg> <arg choice="req">模式1</arg> <arg>選項</arg> <arg>擷取規格1</arg> <arg>模式2</arg> <arg>選項</arg> <arg>擷取規格2</arg> <arg>…</arg>

note: type: Content of: <xsl:stylesheet><xsl:template><table><thead><tr><th>
en: Description
zh_TW: 摘要說明

note: type: Content of: <refentry><refsect1><para>
en: This program extracts specific parts from a &matroska; file to other useful formats. The first argument is the name of the source file which must be a &matroska; file.
zh_TW: 此程式從 &matroska; 檔中提取特定部分到其他有用的格式。第一個參數是原始檔案的名稱，該檔必須是 &matroska; 檔。

note: type: Content of: <refentry><refsect1><para>
en: All other arguments either switch to a certain extraction mode, change options for the currently active mode or specify what to extract into which file.  Multiple modes can be used in the same invocation of mkvextract allowing the extraction of multiple things in a single pass.  Most options can only be used in certain modes with a few options applying to all modes.
zh_TW: 所有其他引數可切換至特定擷取模式，變更目前使用模式的選項，或指定要擷取那些內容至哪個檔案中。可在 mkvextract 同一次啟動中使用多個模式，允許一次擷取多個內容。大多數選項只能在特定模式下使用，只有少數選項適用於所有模式。

note: type: Content of: <refentry><refsect1><para>
en: Currently supported is the extraction of <link linkend="mkvextract.description.tracks">tracks</link>, <link linkend="mkvextract.description.tags">tags</link>, <link linkend="mkvextract.description.attachments">attachments</link>, <link linkend="mkvextract.description.chapters">chapters</link>, <link linkend="mkvextract.description.cuesheets">CUE sheets</link>, <link linkend="mkvextract.description.timestamps_v2">timestamps</link> and <link linkend="mkvextract.description.cues">cues</link>.
zh_TW: 目前支援軌道 <link linkend="mkvextract.description.tracks">tracks 軌道</link>, <link linkend="mkvextract.description.tags">tags 標籤</link>, <link linkend="mkvextract.description.attachments">attachments 附件</link>, <link linkend="mkvextract.description.chapters">chapters 章節</link>, <link linkend="mkvextract.description.cuesheets">CUE sheets CUE 工作表</link>, <link linkend="mkvextract.description.timestamps_v2">timestamps 時間戳記</link> 與 <link linkend="mkvextract.description.cues">cues</link>的擷取。

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Common options
zh_TW: 一般選項

note: type: Content of: <refentry><refsect1><refsect2><para>
en: The following options are available in all modes and only described once in this section.
zh_TW: 以下選項在所有模式下都可用，本節中僅介紹一次。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Sets the parse mode to 'full'. The default mode does not parse the whole file but uses the meta seek elements for locating the required elements of a source file. In 99% of all cases this is enough. But for files that do not contain meta seek elements or which are damaged the user might have to use this mode. A full scan of a file can take a couple of minutes while a fast scan only takes seconds.
zh_TW: 將剖析模式設為 '完整' 。預設模式不會剖析完整檔案，而是使用變換定位元件尋找原始檔案所需的元件。在 99% 情形足以夠用。但對於不包含變換定位元件或受損的檔案來說，使用者很可能需要使用此模式。完整檔案掃描會耗費較久的時間，而快速掃描只需要幾秒鐘。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>--command-line-charset</option> <parameter>character-set</parameter>
zh_TW: <option>--command-line-charset</option> <parameter>字元集</parameter>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Sets the character set to convert strings given on the command line from. It defaults to the character set given by system's current locale.
zh_TW: 設定在命令列顯示的字串字元集，以轉換為其他字元集。預設為目前系統所在位置指定的字元集。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>--output-charset</option> <parameter>character-set</parameter>
zh_TW: <option>--output-charset</option> <parameter>字元集</parameter>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Sets the character set to which strings are converted that are to be output.  It defaults to the character set given by system's current locale.
zh_TW: 設定要轉換為輸出字串的字元集。預設為目前系統所在位置指定的字元集。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>-r</option>, <option>--redirect-output</option> <parameter>file-name</parameter>
zh_TW: <option>-r</option>, <option>--redirect-output</option> <parameter>檔名</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Writes all messages to the file <parameter>file-name</parameter> instead of to the console.  While this can be done easily with output redirection there are cases in which this option is needed: when the terminal reinterprets the output before writing it to a file.  The character set set with <link linkend="mkvextract.description.common.output_charset"><option>--output-charset</option></link> is honored.
zh_TW: 將所有訊息寫入到檔案 <parameter>檔名</parameter> 而不是命令列。儘管使用輸出重新導向可以輕鬆完成此操作，但在某些情況下需要使用此選項: 當終端在將輸出寫入文件之前重新解釋（覆蓋）輸出時。  優先使用通過 <link linkend="mkvextract.description.common.output_charset"><option>--output-charset</option></link> 設定字元集。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Tells the program to flush all data cached in memory to storage when closing files opened for writing.  This can be used to prevent data loss on power outages or to circumvent certain problems in the operating system or drivers.  The downside is that multiplexing will take longer as mkvmerge will wait until all data has been written to the storage before exiting.  See issues #2469 and #2480 on the MKVToolNix bug tracker for in-depth discussions on the pros and cons.
zh_TW: 關閉已開啟寫入的檔案時，告訴程式清理所有在記憶體中的資料。這可以防止因斷電造成的資料遺失或避免作業系統或驅動程式造成的某些問題。缺點是執行合併工具會花費較久個時間，因為 mkvmerge 需要等待所有資料已寫入至儲存空間後，才會結束。請參閱 MKVToolNix 錯誤追蹤上的 #2469 和 #2480 問題，以便深入瞭解其優缺點。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>--ui-language</option> <parameter>code</parameter>
zh_TW: <option>--ui-language</option> <parameter>語言碼</parameter>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Forces the translations for the language <parameter>code</parameter> to be used (e.g.  '<literal>de_DE</literal>' for the German translations). Entering '<literal>list</literal>' as the <parameter>code</parameter> will cause the program to output a list of available translations.
zh_TW: 強制使用語言 <parameter>編碼</parameter> 對應的的翻譯(例如  '<literal>zh_TW</literal>' 為臺灣正體中文翻譯)。 在<parameter>編碼</parameter>欄位中輸入'<literal>list</literal>' 讓程式輸出時使用可用的對應翻譯清單。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Tells the program to abort after the first warning is emitted. The program's exit code will be 1.
zh_TW: 發出第一個警告後，終止程式。程式的結束碼為 1 。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>--debug</option> <parameter>topic</parameter>
zh_TW: <option>--debug</option> <parameter>主題</parameter>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Turn on debugging for a specific feature. This option is only useful for developers.
zh_TW: 針對特定功能開啟除錯。此選項適用於開發者。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>--engage</option> <parameter>feature</parameter>
zh_TW: <option>--engage</option> <parameter>功能</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Turn on experimental features. A list of available features can be requested with <command>mkvextract --engage list</command>. These features are not meant to be used in normal situations.
zh_TW: 開啟實驗中功能。 透過<command>mkvextract --engage list</command>啟用可用的列表。這些功能不會在正常情況下使用。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Turns on GUI mode. In this mode specially-formatted lines may be output that can tell a controlling GUI what's happening. These messages follow the format '<literal>#GUI#message</literal>'. The message may be followed by key/value pairs as in '<literal>#GUI#message#key1=value1#key2=value2…</literal>'. Neither the messages nor the keys are ever translated and always output in English.
zh_TW: 開啟 GUI 模式。在這種模式中，可能會輸出特殊格式的行數，可以呈現控制的 GUI 發生什麼事。這些訊息會以 '<literal>#GUI#訊息</literal>'呈現。訊息可能包含機碼/值，例如 '<literal>#GUI#訊息#機碼1=值1#機碼2=值2…</literal>'。 無論是訊息或是機碼都不會轉為譯文，而且永遠使用 *英語* 輸出。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Be verbose and show all the important &matroska; elements as they're read.
zh_TW: 輸出時盡量詳細，並在讀取時顯示所有 &matroska; 重要的元件。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Show usage information and exit.
zh_TW: 顯示使用方式並退出。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Show version information and exit.
zh_TW: 顯示版本資訊並離開。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Reads additional command line arguments from the file <parameter>options-file</parameter>. For a full explanation on the supported formats for such files see the section called "Option files" in the &mkvmerge; man page.
zh_TW: 從<parameter>檔案選項</parameter>檔讀取其他命令列引數。有關此類檔案支援格式的完整說明，請參閱 &mkvmerge; 文件中的 "選項檔案" 章節。

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Track extraction mode
zh_TW: 軌道擷取模式

note: type: Content of: <refentry><refsect1><refsect2><para>
en: Syntax: <command>mkvextract <parameter>source-filename</parameter> <option>tracks</option> <optional><parameter>options</parameter></optional> <parameter>TID1:dest-filename1</parameter> <optional><parameter>TID2:dest-filename2</parameter> ...</optional></command>
zh_TW: 語法: <command>mkvextract <parameter>原始檔名</parameter> <option>tracks</option> <optional><parameter>選項</parameter></optional> <parameter>TID1:輸出檔名1</parameter> <optional><parameter>TID2:輸出檔名2</parameter> ...</optional></command>

note: type: Content of: <refentry><refsect1><refsect2><para>
en: The following command line options are available for each track in the '<literal>tracks</literal>' extraction mode.  They have to appear in front of the track specification (see below) they should be applied to.
zh_TW: 以下命令列選項可用於 '<literal>tracks</literal>' 提取模式下的每個軌道。 這些命令須在應該所套用到的軌道指令（請見下文）前出現。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>-c</option> <parameter>character-set</parameter>
zh_TW: <option>-c</option> <parameter>字元集</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Sets the character set to convert the next text subtitle track to. Only valid if the next track ID targets a text subtitle track. It defaults to UTF-8.
zh_TW: 設定字元集為下一個文字字幕軌道為該字元集。僅在下一個軌道 ID 對應文字字幕軌道時有效。預設為 UTF-8 。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--blockadd</option> <parameter>level</parameter>
zh_TW: <option>--blockadd</option> <parameter>層級</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Keep only the BlockAdditions up to this level.  The default is to keep all levels.  This option only affects certain kinds of codecs like WAVPACK4.
zh_TW: 僅將 BlockAdditions 保留在此層級。預設為保留所有層級。此選項僅影響某些類型的編碼，例如 WAVPACK4 。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Causes &mkvextract; to extract a <abbrev>CUE</abbrev> sheet from the chapter information and tag data for the following track into a file whose name is the track's output name with '<literal>.cue</literal>' appended to it.
zh_TW: 導致 &mkvextract; 從章節資訊中擷取 <abbrev>CUE</abbrev> 工作表，並將該軌道的資料標記到由輸出軌道名稱命名並以 '<literal>.cue</literal>' 為格式的檔案中。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Extracts the raw data into a file without any container data around it.  Unlike the <link linkend="mkvextract.description.tracks.fullraw"><option>--fullraw</option></link> flag this flag does not cause the contents of the <classname>CodecPrivate</classname> element to be written to the file.  This mode works with all <classname>CodecIDs</classname>, even the ones that &mkvextract; doesn't support otherwise, but the resulting files might not be usable.
zh_TW: 將原始資料擷取到原始檔案裡，但不包含其他容器資料。與 <link linkend="mkvextract.description.tracks.fullraw"><option>--fullraw</option></link> 標籤不同，此標籤不會導致 <classname>CodecPrivate</classname> 元件的內容寫入檔案。此模式適用於所有的 <classname>CodecIDs</classname> ，縱使 &mkvextract; 不支援，可能也會產生無法使用的檔案。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Extracts the raw data into a file without any container data around it.  The contents of the <classname>CodecPrivate</classname> element will be written to the file first if the track contains such a header element.  This mode works with all <classname>CodecIDs</classname>, even the ones that &mkvextract; doesn't support otherwise, but the resulting files might not be usable.
zh_TW: 將原始資料擷取到原始檔案裡，但不包含其他容器資料。如果軌道包含表頭元件，那麼 <classname>CodecPrivate</classname> 元件將寫入檔案中。此模式適用於所有的 <classname>CodecIDs</classname>，縱使 &mkvextract; 不支援，可能也會產生無法使用的檔案。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <parameter>TID:outname</parameter>
zh_TW: <parameter>TID:輸出檔名</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Causes extraction of the track with the ID <parameter>TID</parameter> into the file <parameter>outname</parameter> if such a track exists in the source file. This option can be given multiple times. The track IDs are the same as the ones output by &mkvmerge;'s <option>--identify</option> option.
zh_TW: 如果原始檔案中存在 ID 為 <parameter>TID</parameter> 的軌道，會將擷取為 <parameter>輸出檔名</parameter> 。此選項可多次使用。軌道 ID 與 &mkvmerge; 的 <option>--identify</option> 選項輸出的相同。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Each output name should be used only once. The exception are RealAudio and RealVideo tracks. If you use the same name for different tracks then those tracks will be saved in the same file. Example:
zh_TW: 每個輸出名稱只能使用一次，但 RealAudio 與 RealVideo 軌道除外。如果將不同的軌道使用相同的名稱，那麼會儲存到同一個檔案。例如:

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Attachments extraction mode
zh_TW: 附件擷取模式

note: type: Content of: <refentry><refsect1><refsect2><para>
en: Syntax: <command>mkvextract <parameter>source-filename</parameter> <option>attachments</option> <optional><parameter>options</parameter></optional> <parameter>AID1:outname1</parameter> <optional><parameter>AID2:outname2</parameter> ...</optional></command>
zh_TW: 語法: <command>mkvextract <parameter>原始檔名</parameter> <option>attachments</option> <optional><parameter>選項</parameter></optional> <parameter>AID1:輸出檔名1</parameter> <optional><parameter>AID2:輸出檔名2</parameter> ...</optional></command>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <parameter>AID</parameter>:<parameter>outname</parameter>
zh_TW: <parameter>AID</parameter>:<parameter>輸出檔名</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Causes extraction of the attachment with the ID <parameter>AID</parameter> into the file <parameter>outname</parameter> if such an attachment exists in the source file.  If the <parameter>outname</parameter> is left empty then the name of the attachment inside the source &matroska; file is used instead.  This option can be given multiple times.  The attachment IDs are the same as the ones output by &mkvmerge;'s <option>--identify</option> option.
zh_TW: 如果原始檔案中存在 ID 為 <parameter>AID</parameter> 的附件軌道，會將擷取為 <parameter>輸出檔名</parameter> 。假設 <parameter>輸出檔名</parameter> 保留空白，那麼將會使用原始 &matroska; 檔案中的附件名稱。此選項可多次使用。此選項可多次使用。附件 ID 與 &mkvmerge; 的 <option>--identify</option> 選項輸出的相同。

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Chapters extraction mode
zh_TW: 章節擷取模式

note: type: Content of: <refentry><refsect1><refsect2><para>
en: Syntax: <command>mkvextract <parameter>source-filename</parameter> <option>chapters</option> <optional><parameter>options</parameter></optional> <parameter>output-filename.xml</parameter></command>
zh_TW: 語法: <command>mkvextract <parameter>原始檔名</parameter> <option>chapters</option> <optional><parameter>選項</parameter></optional> <parameter>輸出檔名.xml</parameter></command>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Exports the chapter information in the simple format used in the <abbrev>OGM</abbrev> tools (CHAPTER01=..., CHAPTER01NAME=...). In this mode some information has to be discarded. Default is to output the chapters in &xml; format.
zh_TW: 用 <abbrev>OGM</abbrev> 工具的簡易格式來匯出章節資訊 (CHAPTER01=..., CHAPTER01NAME=…)。 在此模式中，將會丟棄部分資訊。預設是以 &xml; 格式輸出章節。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--simple-language</option> <parameter>language</parameter>
zh_TW: <option>--simple-language</option> <parameter>語言</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: If the simple format is enabled then &mkvextract; will only output a single entry for each chapter atom encountered even if a chapter atom contains more than one chapter name.  By default &mkvextract; will use the first chapter name found for each atom regardless of its language.
zh_TW: 如果啟用簡易模式， &mkvextract; 即使單一章節單元包含一個以上的章節名稱，每個章節單元只會輸出單一項目。在預設情況下，無論任何語言， &mkvextract; 都將會使用找到的第一個名稱。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Using this option allows the user to determine which chapter names are output if atoms contain more than one chapter name.  The <parameter>language</parameter> parameter must be an ISO 639-1 or ISO 639-2 code.
zh_TW: 使用此選項，當單元包含一個以上章節名稱時，允許使用者決定使用哪一個章節名稱作為輸出使用。 <parameter>語言</parameter> 參數必須為 ISO 639-1 或 ISO 639-2 編碼。

note: type: Content of: <refentry><refsect1><refsect2><para>
en: The chapters are written to specified output file. By default the &xml; format understood by &mkvmerge; is used. If no chapters are found in the file, the output file is not created.
zh_TW: 章節將寫入指定輸出檔案。預設情況下，會使用 &mkvmerge; 可識別的 &xml; 格式。如果檔案中沒有找到任何章節，將不會建立輸出檔案。

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Tags extraction mode
zh_TW: 標籤擷取模式

note: type: Content of: <refentry><refsect1><refsect2><para>
en: Syntax: <command>mkvextract <parameter>source-filename</parameter> <option>tags</option> <optional><parameter>options</parameter></optional> <parameter>output-filename.xml</parameter></command>
zh_TW: 語法: <command>mkvextract <parameter>原始檔名</parameter> <option>tags</option> <optional><parameter>選項</parameter></optional> <parameter>輸出檔名.xml</parameter></command>

note: type: Content of: <refentry><refsect1><refsect2><para>
en: The tags are written to specified output file in the &xml; format understood by &mkvmerge;. If no tags are found in the file, the output file is not created.
zh_TW: 標籤將寫入指定輸出檔案。預設情況下，會使用 &mkvmerge; 可識別的 &xml; 格式。如果檔案中沒有找到任何標籤，將不會建立輸出檔案。

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Cue sheet extraction mode
zh_TW: Cue 工作表擷取模式

note: type: Content of: <refentry><refsect1><refsect2><para>
en: Syntax: <command>mkvextract <parameter>source-filename</parameter> <option>cuesheet</option> <optional><parameter>options</parameter></optional> <parameter>output-filename.cue</parameter></command>
zh_TW: 語法: <command>mkvextract <parameter>原始檔名</parameter> <option>cuesheet</option> <optional><parameter>選項</parameter></optional> <parameter>輸出檔名.cue</parameter></command>

note: type: Content of: <refentry><refsect1><refsect2><para>
en: The cue sheet is written to specified output file. If no chapters or tags are found in the file, the output file is not created.
zh_TW: CUE 表單將寫入指定輸出檔案。如果檔案中沒有找到任何章節或標籤，將不會建立輸出檔案。

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Timestamp extraction mode
zh_TW: 時間戳記擷取模式

note: type: Content of: <refentry><refsect1><refsect2><para>
en: Syntax: <command>mkvextract <parameter>source-filename</parameter> <option>timestamps_v2</option> <optional><parameter>options</parameter></optional> <parameter>TID1:dest-filename1</parameter> <optional><parameter>TID2:dest-filename2</parameter> ...</optional></command>
zh_TW: 語法: <command>mkvextract <parameter>原始檔名</parameter> <option>timestamps_v2</option> <optional><parameter>選項</parameter></optional> <parameter>TID1:輸出檔名1</parameter> <optional><parameter>TID2:輸出檔名2</parameter> ...</optional></command>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Causes extraction of the timestamps for the track with the ID <parameter>TID</parameter> into the file <parameter>outname</parameter> if such a track exists in the source file. This option can be given multiple times. The track IDs are the same as the ones output by &mkvmerge;'s <option>--identify</option> option.
zh_TW: 如果原始檔案中存在 ID 為 <parameter>TID</parameter> 的時間戳記軌道，會將擷取為 <parameter>輸出檔名</parameter> 。此選項可多次使用。此選項可多次使用。軌道 ID 與 &mkvmerge; 的 <option>--identify</option> 選項輸出的相同。

note: type: Content of: <refentry><refsect1><refsect2><para>
en: Example:
zh_TW: 範例:

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Cues extraction mode
zh_TW: Cue 擷取模式

note: type: Content of: <refentry><refsect1><refsect2><para>
en: Syntax: <command>mkvextract <parameter>source-filename</parameter> <option>cues</option> <optional><parameter>options</parameter></optional> <parameter>TID1:dest-filename1</parameter> <optional><parameter>TID2:dest-filename2</parameter> ...</optional></command>
zh_TW: 語法: <command>mkvextract <parameter>原始檔名</parameter> <option>cues</option> <optional><parameter>選項</parameter></optional> <parameter>TID1:輸出檔名1</parameter> <optional><parameter>TID2:輸出檔名2</parameter> ...</optional></command>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <parameter>TID:dest-filename</parameter>
zh_TW: <parameter>TID:輸出檔名</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Causes extraction of the cues for the track with the ID <parameter>TID</parameter> into the file <parameter>outname</parameter> if such a track exists in the source file. This option can be given multiple times. The track IDs are the same as the ones output by &mkvmerge;'s <option>--identify</option> option and not the numbers contained in the <classname>CueTrack</classname> element.
zh_TW: 如果原始檔案中存在 ID 為 <parameter>TID</parameter> 的 CUE 軌道，會將擷取為 <parameter>輸出檔名</parameter> 。此選項可多次使用。此選項可多次使用。附件 ID 與 &mkvmerge; 的 <option>--identify</option> 選項輸出的相同，且不會包含 <classname>CueTrack</classname> 元件的數字。

note: type: Content of: <refentry><refsect1><refsect2><para>
en: The format output is a simple text format: one line per <classname>CuePoint</classname> element with <literal>key=value</literal> pairs. If an optional element is not present in a <classname>CuePoint</classname> (e.g. <classname>CueDuration</classname>) then a dash will be output as the value.
zh_TW: 輸出的格式為簡易文字格式: 每行對應一組 <classname>CuePoint</classname> 元件與 <literal>機碼=值</literal>。當選用的元素不存在於 <classname>CuePoint</classname> 時(例如 <classname>CueDuration</classname>) ，將會以短破折號(虛線)作為輸出值。

note: type: Content of: <refentry><refsect1><refsect2><para>
en: The possible keys are:
zh_TW: 可使用的機碼如下:

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: The cue point's timestamp with nanosecond precision. The format is <literal>HH:MM:SS.nnnnnnnnn</literal>. This element is always set.
zh_TW: CUE 點的時間戳記( <literal>timestamp</literal>)具有奈秒的精準度。格式為 <literal>HH:MM:SS.nnnnnnnnn</literal>。 此元件為必要設定。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: The cue point's duration with nanosecond precision. The format is <literal>HH:MM:SS.nnnnnnnnn</literal>.
zh_TW: CUE 點的時間長度(<literal>duration</literal>)具有奈秒的精準度。格式為 <literal>HH:MM:SS.nnnnnnnnn</literal>。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: The absolute position in bytes inside the &matroska; file where the cluster containing the referenced element starts.
zh_TW: 包含引用元件的叢集起始的 &matroska; 檔案內位元組的絕對位置。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><note><para>
en: Inside the &matroska; file the <classname>CueClusterPosition</classname> is relative to the segment's data start offset. The value output by &mkvextract;'s cue extraction mode, however, contains that offset already and is an absolute offset from the beginning of the file.
zh_TW: &matroska; 檔案中的 <classname>CueClusterPosition</classname> 相對於剪輯資訊資料的起始偏移。但由 &mkvextract; CUE 擷取模式輸出的值已經包含該偏移，並且是與文件開頭的絕對偏移。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: The relative position in bytes inside the cluster where the <classname>BlockGroup</classname> or <classname>SimpleBlock</classname> element the cue point refers to starts.
zh_TW: CUE 點引用的 <classname>BlockGroup</classname> 或 <classname>SimpleBlock</classname> 元件在叢集起始內以位元組為單位的相對位置。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><note><para>
en: Inside the &matroska; file the <classname>CueRelativePosition</classname> is relative to the cluster's data start offset. The value output by &mkvextract;'s cue extraction mode, however, is relative to the cluster's ID. The absolute position inside the file can be calculated by adding <literal>cluster_position</literal> and <literal>relative_position</literal>.
zh_TW: &matroska; 檔案中的 <classname>CueRelativePosition</classname> 是相對於叢集資料起始的偏移。但 &mkvextract; 的 CUE 擷取模式所輸出的值，是相對於叢集的 ID 。可通過新增與新增檔案計算檔案內的 <literal>cluster_position</literal> 和 <literal>relative_position</literal>。

note: type: Content of: <refentry><refsect1><title>
en: Examples
zh_TW: 範例

note: type: Content of: <refentry><refsect1><para>
en: Extracting both chapters and tags in their respective &xml; formats at the same time:
zh_TW: 同時擷取章節與標籤並依照各自的 &xml; 格式儲存:

note: type: Content of: <refentry><refsect1><para>
en: Extracting a couple of tracks and their respective timestamps at the same time:
zh_TW: 同時擷取數個軌道與各自對應的時間戳記:

note: type: Content of: <refentry><refsect1><para>
en: Extracting chapters in the Ogg/OGM format and re-encoding a text subtitle track to another character set:
zh_TW: 擷取 Ogg/OGM 格式的章節，然後將文字字幕軌道重新編碼到另一個字元集:

note: type: Content of: <refentry><refsect1><title>
en: Text files and character set conversions
zh_TW: 文字檔案與字元集轉換

note: type: Content of: <refentry><refsect1><title>
en: Output file formats
zh_TW: 檔案輸出格式

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: These will be extracted to raw <abbrev>AC-3</abbrev> files.
zh_TW: 這將會擷取為 raw <abbrev>AC-3</abbrev> 檔案。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: <abbrev>ALAC</abbrev> tracks are written to <abbrev>CAF</abbrev> files.
zh_TW: <abbrev>ALAC</abbrev> 軌道將寫入成 <abbrev>CAF</abbrev> 檔案。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: These will be extracted to raw <abbrev>DTS</abbrev> files.
zh_TW: 這將會擷取為 raw <abbrev>DTS</abbrev> 檔案。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: <abbrev>FLAC</abbrev> tracks are written to raw <abbrev>FLAC</abbrev> files.
zh_TW: <abbrev>FLAC</abbrev> 軌道將寫入成原始 <abbrev>FLAC</abbrev> 檔案。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: MPEG-1 Audio Layer II streams will be extracted to raw <abbrev>MP2</abbrev> files.
zh_TW: MPEG-1 音層 II 串流將會擷取為原始的 <abbrev>MP2</abbrev> 檔案。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: These will be extracted to raw <abbrev>MP3</abbrev> files.
zh_TW: 這將會擷取為 raw <abbrev>MP3</abbrev> 檔案。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: <productname>Opus</productname> tracks are written to <productname>OggOpus</productname> files.
zh_TW: <productname>Opus</productname> 軌道將寫入成 <productname>OggOpus</productname> 檔案。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: <productname>RealAudio</productname> tracks are written to <productname>RealMedia</productname> files.
zh_TW: <productname>RealAudio</productname> 軌道將寫入成 <productname>RealMedia</productname> 檔案。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: These will be extracted to raw <abbrev>TrueHD</abbrev>/<abbrev>MLP</abbrev> files.
zh_TW: 這將會擷取為 raw <abbrev>TrueHD</abbrev>/<abbrev>MLP</abbrev> 檔案。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Vorbis audio will be written into an &oggvorbis; file.
zh_TW: Vorbis 音訊將會以 &oggvorbis; 寫入檔案。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: <productname>WavPack</productname> tracks are written to <abbrev>WV</abbrev> files.
zh_TW: <productname>WavPack</productname> 軌道將寫入成 <abbrev>WV</abbrev> 檔案。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: <abbrev>PGS</abbrev> subtitles will be written as <abbrev>SUP</abbrev> files.
zh_TW: <abbrev>PGS</abbrev> 字幕將會以 <abbrev>SUP</abbrev> 寫入檔案。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: <abbrev>SSA</abbrev> and <abbrev>ASS</abbrev> text subtitles will be written as <abbrev>SSA</abbrev>/<abbrev>ASS</abbrev> files respectively.
zh_TW: <abbrev>SSA</abbrev> 與 <abbrev>ASS</abbrev> 純文字字幕將會分別以 <abbrev>SSA</abbrev>/<abbrev>ASS</abbrev> 寫入檔案。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Simple text subtitles will be written as <abbrev>SRT</abbrev> files.
zh_TW: 簡易純文字字幕將會以 <abbrev>SRT</abbrev> 寫入檔案。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: <abbrev>USF</abbrev> text subtitles will be written as <abbrev>USF</abbrev> files.
zh_TW: <abbrev>USF</abbrev> 純文字字幕將會以 <abbrev>USF</abbrev> 寫入檔案。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: <abbrev>WebVTT</abbrev> text subtitles will be written as <abbrev>WebVTT</abbrev> files.
zh_TW: <abbrev>WebVTT</abbrev> 純文字字幕將會以 <abbrev>WebVTT</abbrev> 寫入檔案。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: <productname>RealVideo</productname> tracks are written to <productname>RealMedia</productname> files.
zh_TW: <productname>RealVideo</productname> 軌道將寫入成 <productname>RealMedia</productname> 檔案。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: <abbrev>VP8</abbrev> / <abbrev>VP9</abbrev> tracks are written to <abbrev>IVF</abbrev> files.
zh_TW: <abbrev>VP8</abbrev> / <abbrev>VP9</abbrev> 軌道將寫入成 <abbrev>IVF</abbrev> 檔案。

note: type: Content of: <refentry><refsect1><title>
en: Tags
zh_TW: 標籤

note: type: Content of: <refentry><refsect1><title>
en: Attachments
zh_TW: 附件

note: type: Content of: <refentry><refsect1><title>
en: Chapters
zh_TW: 章節

note: type: Content of: <refentry><refsect1><title>
en: Exit codes
zh_TW: 結束代碼

note: type: Content of: <refentry><refsect1><para>
en: &mkvextract; exits with one of three exit codes:
zh_TW: 使用三個之一的結束代碼結束 &mkvextract; ：

note: type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
en: <constant>0</constant> -- This exit code means that extraction has completed successfully.
zh_TW: <constant>0</constant> -- 此結束代碼表示擷取已成功完成。

note: type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
en: <constant>1</constant> -- In this case &mkvextract; has output at least one warning, but extraction did continue.  A warning is prefixed with the text '<literal>Warning:</literal>'.  Depending on the issues involved the resulting files might be ok or not.  The user is urged to check both the warning and the resulting files.
zh_TW: <constant>1</constant> -- 在此情況下， &mkvextract; 輸出時至少有一則警告，但擷取動作仍然進行。警告訊息會在前端出現 '<literal>警告:</literal>'字樣。依據問題的程度，生成的檔案也許可用。建議使用者檢視警告訊息與輸出檔。

note: type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
en: <constant>2</constant> -- This exit code is used after an error occurred.  &mkvextract; aborts right after outputting the error message.  Error messages range from wrong command line arguments over read/write errors to broken files.
zh_TW: <constant>2</constant> -- 此結束代碼用於發生錯誤後。&mkvextract; 在輸出錯誤訊息後立即中止動作。錯誤訊息的範圍包含從錯誤命令列參數的讀/寫至檔案損壞。

note: type: Content of: <refentry><refsect1><title>
en: Environment variables
zh_TW: 環境變數

note: type: Content of: <refentry><refsect1><para>
en: &mkvextract; uses the default variables that determine the system's locale (e.g. <varname>LANG</varname> and the <varname>LC_*</varname> family). Additional variables:
zh_TW: &mkvextract; 使用決定系統的地區設定的變數 (例如： <varname>LANG</varname> 與 <varname>LC_*</varname> 系列)。 附加變數：

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <varname>MKVEXTRACT_DEBUG</varname>, <varname>MKVTOOLNIX_DEBUG</varname> and its short form <varname>MTX_DEBUG</varname>
zh_TW: <varname>MKVEXTRACT_DEBUG</varname>, <varname>MKVTOOLNIX_DEBUG</varname> 與其縮寫 <varname>MTX_DEBUG</varname>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: The content is treated as if it had been passed via the <link linkend="mkvextract.description.debug"><option>--debug</option></link> option.
zh_TW: 視為通過 <link linkend="mkvextract.description.debug"><option>--debug</option></link> 選項傳遞的內容。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <varname>MKVEXTRACT_ENGAGE</varname>, <varname>MKVTOOLNIX_ENGAGE</varname> and its short form <varname>MTX_ENGAGE</varname>
zh_TW: <varname>MKVEXTRACT_ENGAGE</varname>, <varname>MKVTOOLNIX_ENGAGE</varname> 與其縮寫 <varname>MTX_ENGAGE</varname>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: The content is treated as if it had been passed via the <link linkend="mkvextract.description.engage"><option>--engage</option></link> option.
zh_TW: 視為通過 <link linkend="mkvextract.description.engage"><option>--engage</option></link> 選項傳遞的內容。

note: type: Content of: <refentry><refsect1><title>
en: See also
zh_TW: 參閱

note: type: Content of: <refentry><refsect1><title>
en: WWW
zh_TW: 網路

note: type: Content of: <refentry><refsect1><para>
en: The latest version can always be found at <ulink url="https://mkvtoolnix.download/">the MKVToolNix homepage</ulink>.
zh_TW: 永遠可在 <ulink url="https://mkvtoolnix.download/">MKVToolNix 首頁</ulink> 找到最新版。

note: type: Content of: <refentry><refsynopsisdiv><cmdsynopsis>
en: <command>mkvinfo</command> <arg>options</arg> <arg choice="req">source-filename</arg>
zh_TW: <command>mkvinfo</command> <arg>選項</arg> <arg choice="req">輸入檔名</arg>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Show the size of each element including its header.
zh_TW: 顯示包含標頭的各元件大小。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Writes all messages to the file <parameter>file-name</parameter> instead of to the console.  While this can be done easily with output redirection there are cases in which this option is needed: when the terminal reinterprets the output before writing it to a file.  The character set set with <link linkend="mkvinfo.description.output_charset"><option>--output-charset</option></link> is honored.
zh_TW: 將所有訊息寫入到檔案 <parameter>檔名</parameter> 而不是命令列。儘管使用輸出重新導向可以輕鬆完成此操作，但在某些情況下需要使用此選項: 當終端在將輸出寫入文件之前重新解釋（覆蓋）輸出時。  優先使用通過 <link linkend="mkvinfo.description.output_charset"><option>--output-charset</option></link> 設定字元集。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Turn on experimental features. A list of available features can be requested with <command>mkvinfo --engage list</command>. These features are not meant to be used in normal situations.
zh_TW: 開啟實驗中功能。 透過<command>mkvinfo --engage list</command>啟用可用的列表。這些功能不會在正常情況下使用。

note: type: Content of: <refentry><refsect1><title>
en: Verbosity levels
zh_TW: 詳細資訊層級

note: type: Content of: <refentry><refsect1><para>
en: &mkvinfo; exits with one of three exit codes:
zh_TW: 使用三個之一的結束代碼結束 &mkvinfo; ：

note: type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
en: <constant>0</constant> -- This exit code means that the run has completed successfully.
zh_TW: <constant>0</constant> -- 此結束代碼表示執行已成功完成。

note: type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
en: <constant>1</constant> -- In this case &mkvinfo; has output at least one warning, but the run did continue.  A warning is prefixed with the text '<literal>Warning:</literal>'.
zh_TW: <constant>1</constant> -- 在此情況下 &mkvinfo; 輸出時至少有一則警告，但動作仍然進行。警告訊息會在前端出現 '<literal>警告:</literal>' 字樣。

note: type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
en: <constant>2</constant> -- This exit code is used after an error occurred.  &mkvinfo; aborts right after outputting the error message.  Error messages range from wrong command line arguments over read/write errors to broken files.
zh_TW: <constant>2</constant> -- 此結束代碼用於發生錯誤後。 &mkvinfo; 在輸出錯誤訊息後立即中止動作。錯誤訊息的範圍包含從錯誤命令列參數的讀/寫至檔案損壞。

note: type: Content of: <refentry><refsect1><para>
en: &mkvinfo; uses the default variables that determine the system's locale (e.g. <varname>LANG</varname> and the <varname>LC_*</varname> family). Additional variables:
zh_TW: &mkvinfo; 使用決定系統的地區設定的變數 (例如： <varname>LANG</varname> 與 <varname>LC_*</varname> 系列)。 附加變數：

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <varname>MKVINFO_DEBUG</varname>, <varname>MKVTOOLNIX_DEBUG</varname> and its short form <varname>MTX_DEBUG</varname>
zh_TW: <varname>MKVINFO_DEBUG</varname>, <varname>MKVTOOLNIX_DEBUG</varname> 與其的簡短形式 <varname>MTX_DEBUG</varname>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: The content is treated as if it had been passed via the <link linkend="mkvinfo.description.debug"><option>--debug</option></link> option.
zh_TW: 視為通過 <link linkend="mkvinfo.description.debug"><option>--debug</option></link> 選項傳遞的內容。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <varname>MKVINFO_ENGAGE</varname>, <varname>MKVTOOLNIX_ENGAGE</varname> and its short form <varname>MTX_ENGAGE</varname>
zh_TW: <varname>MKVINFO_ENGAGE</varname>, <varname>MKVTOOLNIX_ENGAGE</varname> 與其的簡短形式 <varname>MTX_ENGAGE</varname>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: The content is treated as if it had been passed via the <link linkend="mkvinfo.description.engage"><option>--engage</option></link> option.
zh_TW: 視為通過 <link linkend="mkvinfo.description.engage"><option>--engage</option></link> 選項傳遞的內容。

note: type: Content of: <refentry><refnamediv><refpurpose>
en: Merge multimedia streams into a &matroska; file
zh_TW: 合併多媒體串流到 &matroska; 檔案中

note: type: Content of: <refentry><refsynopsisdiv><cmdsynopsis>
en: <command>mkvmerge</command> <arg>global options</arg> <arg choice="req">-o out</arg> <arg>options1</arg> <arg choice="req">file1</arg> <arg> <arg>options2</arg> <arg choice="req">file2</arg> </arg> <arg>@options-file.json</arg>
zh_TW: <command>mkvmerge</command> <arg>全域選項</arg> <arg choice="req">-o 輸出</arg> <arg>選項1</arg> <arg choice="req">檔案1</arg> <arg> <arg>選項2</arg> <arg choice="req">檔案2</arg> </arg> <arg>@選項檔.json</arg>

note: type: Content of: <refentry><refsect1><para>
en: This program takes the input from several media files and joins their streams (all of them or just a selection) into a &matroska; file; see <ulink url="https://www.matroska.org/">the &matroska; website</ulink>.
zh_TW: 此程式可從多個輸入的媒體檔案，並加入其他（全部或部分）串流成為一個 &matroska; 檔案；請見 <ulink url="https://www.matroska.org/"> &matroska; 網站</ulink>。

note: type: Content of: <refentry><refsect1><important><para>
en: The order of command line options is important. Please read the section <link linkend="mkvmerge.option_order">&quot;Option order&quot;</link> if you're new to the program.
zh_TW: 命令列的順序選項極為重要。如果您是本程式新手，請閱讀<link linkend="mkvmerge.option_order">&quot;選項順序&quot;</link> 段落。

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Global options
zh_TW: 全域選項

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Increase verbosity.
zh_TW: 增加詳細資訊。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Suppress status output.
zh_TW: 隱藏狀態輸出。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>-o</option>, <option>--output</option> <parameter>file-name</parameter>
zh_TW: <option>-o</option>, <option>--output</option> <parameter>檔名</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Write to the file <parameter>file-name</parameter>.  If splitting is used then this parameter is treated a bit differently.  See the explanation for the <link linkend="mkvmerge.description.split"><option>--split</option></link> option for details.
zh_TW: 寫入至檔案 <parameter>檔名</parameter>。如果使用分割功能，此參數的處理方式會有所不同。詳細資訊請參閱 <link linkend="mkvmerge.description.split"><option>--split</option></link> 選項說明。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--title</option> <parameter>title</parameter>
zh_TW: <option>--title</option> <parameter>標題</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--default-language</option> <parameter>language-code</parameter>
zh_TW: <option>--default-language</option> <parameter>語言碼</parameter>

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Segment info handling (global options)
zh_TW: 剪輯資訊處理(全域選項)

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--segmentinfo</option> <parameter>filename.xml</parameter>
zh_TW: <option>--segmentinfo</option> <parameter>檔名.xml</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: See the section about <link linkend="mkvmerge.segmentinfo">segment info XML files</link> below for details.
zh_TW: 關於詳細資訊請參閱下列 <link linkend="mkvmerge.segmentinfo">剪輯資訊 XML 檔</link> 的章節。

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Chapter and tag handling (global options)
zh_TW: 章節與標籤處裡(全域選項)

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--chapter-language</option> <parameter>language-code</parameter>
zh_TW: <option>--chapter-language</option> <parameter>語言碼</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--chapter-charset</option> <parameter>character-set</parameter>
zh_TW: <option>--chapter-charset</option> <parameter>字元集</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--generate-chapters</option> <parameter>mode</parameter>
zh_TW: <option>--generate-chapters</option> <parameter>模式</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><itemizedlist><listitem><para>
en: Example: <literal>--generate-chapters interval:45s</literal>
zh_TW: 範例: <literal>--generate-chapters interval:45s</literal>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--generate-chapters-name-template</option> <parameter>template</parameter>
zh_TW: <option>--generate-chapters-name-template</option> <parameter>範本</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><itemizedlist><listitem><para>
en: <literal>%h</literal> – hours
zh_TW: <literal>%h</literal> – 時

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><itemizedlist><listitem><para>
en: <literal>%H</literal> – hours zero-padded to two places
zh_TW: <literal>%H</literal> – 二位數小時

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><itemizedlist><listitem><para>
en: <literal>%m</literal> – minutes
zh_TW: <literal>%m</literal> – 分

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><itemizedlist><listitem><para>
en: <literal>%M</literal> – minutes zero-padded to two places
zh_TW: <literal>%M</literal> – 二位數分鐘

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><itemizedlist><listitem><para>
en: <literal>%s</literal> – seconds
zh_TW: <literal>%s</literal> – 秒

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><itemizedlist><listitem><para>
en: <literal>%S</literal> – seconds zero-padded to two places
zh_TW: <literal>%S</literal> – 二位數秒數

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><itemizedlist><listitem><para>
en: <literal>%n</literal> – nanoseconds with nine places
zh_TW: <literal>%n</literal> – 小數點後九位的奈秒

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--cue-chapter-name-format</option> <parameter>format</parameter>
zh_TW: <option>--cue-chapter-name-format</option> <parameter>格式</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--chapters</option> <parameter>file-name</parameter>
zh_TW: <option>--chapters</option> <parameter>檔名</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--global-tags</option> <parameter>file-name</parameter>
zh_TW: <option>--global-tags</option> <parameter>檔名</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Read global tags from the file <parameter>file-name</parameter>. See the section about <link linkend="mkvmerge.tags">tags</link> below for details.
zh_TW: 從檔案 <parameter>檔名</parameter>讀取全域標籤。關於詳細資訊請參閱下列 <link linkend="mkvmerge.tags">標籤</link> 的章節。

note: type: Content of: <refentry><refsect1><refsect2><title>
en: General output control (advanced global options)
zh_TW: 一般輸出控制 (進階全域選項)

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--cluster-length</option> <parameter>spec</parameter>
zh_TW: <option>--cluster-length</option> <parameter>規格</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--timestamp-scale</option> <parameter>factor</parameter>
zh_TW: <option>--timestamp-scale</option> <parameter>因素</parameter>

note: type: Content of: <refentry><refsect1><refsect2><title>
en: File splitting, linking, appending and concatenation (more global options)
zh_TW: 檔案分割、連結、附加與串聯 (其他全域選項)

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--split</option> <parameter>specification</parameter>
zh_TW: <option>--split</option> <parameter>規格</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: Splitting by size.
zh_TW: 依大小分割。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: Syntax: <option>--split</option> <optional><literal>size:</literal></optional><parameter>d</parameter><optional>k|m|g</optional>
zh_TW: 語法: <option>--split</option> <optional><literal>size:</literal></optional><parameter>d</parameter><optional>k|m|g</optional>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: Examples: <code>--split size:700m</code> or <code>--split 150000000</code>
zh_TW: 範例: <code>--split size:700m</code> 或 <code>--split 150000000</code>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: The '<literal>size:</literal>' prefix may be omitted for compatibility reasons.
zh_TW: '<literal>size:</literal>' 的首碼可因相容性理由省略。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: Splitting after a duration.
zh_TW: 時間後分割。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: Syntax: <option>--split</option> <optional><literal>duration:</literal></optional><parameter>HH:MM:SS.nnnnnnnnn</parameter>|<parameter>d</parameter>s
zh_TW: 語法: <option>--split</option> <optional><literal>duration:</literal></optional><parameter>HH:MM:SS.nnnnnnnnn</parameter>|<parameter>d</parameter>s

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: Examples: <code>--split duration:00:60:00.000</code> or <code>--split 3600s</code>
zh_TW: 範例: <code>--split duration:00:60:00.000</code> 或 <code>--split 3600s</code>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: The '<literal>duration:</literal>' prefix may be omitted for compatibility reasons.
zh_TW:  '<literal>duration:</literal>' 的首碼可因相容性理由省略。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: Splitting after specific timestamps.
zh_TW: 指定時間戳記後分割。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: Syntax: <option>--split</option> <literal>timestamps:</literal><parameter>A</parameter><optional>,<parameter>B</parameter><optional>,<parameter>C</parameter>...</optional></optional>
zh_TW: 語法: <option>--split</option> <literal>timestamps:</literal><parameter>A</parameter><optional>,<parameter>B</parameter><optional>,<parameter>C</parameter>...</optional></optional>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: Example: <code>--split timestamps:00:45:00.000,01:20:00.250,6300s</code>
zh_TW: 範例: <code>--split timestamps:00:45:00.000,01:20:00.250,6300s</code>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: The '<literal>timestamps:</literal>' prefix must not be omitted.
zh_TW: '<literal>timestamps:</literal>' 的首碼不可省略。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: Syntax: <option>--split</option> <literal>parts:</literal><parameter>start1</parameter>-<parameter>end1</parameter><optional>,<optional>+</optional><parameter>start2</parameter>-<parameter>end2</parameter><optional>,<optional>+</optional><parameter>start3</parameter>-<parameter>end3</parameter>...</optional></optional>
zh_TW: 語法: <option>--split</option> <literal>parts:</literal><parameter>起始1</parameter>-<parameter>結束1</parameter><optional>,<optional>+</optional><parameter>起始2</parameter>-<parameter>結束2</parameter><optional>,<optional>+</optional><parameter>起始3</parameter>-<parameter>結束3</parameter>...</optional></optional>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: Examples: <placeholder type="orderedlist" id="0"/>
zh_TW: 範例: <placeholder type="orderedlist" id="0"/>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: Syntax: <option>--split</option> <literal>parts-frames:</literal><parameter>start1</parameter>-<parameter>end1</parameter><optional>,<optional>+</optional><parameter>start2</parameter>-<parameter>end2</parameter><optional>,<optional>+</optional><parameter>start3</parameter>-<parameter>end3</parameter>...</optional></optional>
zh_TW: 語法: <option>--split</option> <literal>parts-frames:</literal><parameter>start1</parameter>-<parameter>end1</parameter><optional>,<optional>+</optional><parameter>start2</parameter>-<parameter>end2</parameter><optional>,<optional>+</optional><parameter>start3</parameter>-<parameter>end3</parameter>...</optional></optional>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: Splitting after specific frames/fields.
zh_TW: 在指定影格數/圖場數後分割。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: Syntax: <option>--split</option> <literal>frames:</literal><parameter>A</parameter><optional>,<parameter>B</parameter><optional>,<parameter>C</parameter>...</optional></optional>
zh_TW: 語法: <option>--split</option> <literal>frames:</literal><parameter>A</parameter><optional>,<parameter>B</parameter><optional>,<parameter>C</parameter>...</optional></optional>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: The '<literal>frames:</literal>' prefix must not be omitted.
zh_TW: '<literal>frames:</literal>' 的首碼不可省略。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: Splitting before specific chapters.
zh_TW: 在指定的章節前分割。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: Syntax: <option>--split</option> <literal>chapters:all</literal> or <option>--split</option> <literal>chapters:</literal><parameter>A</parameter><optional>,<parameter>B</parameter><optional>,<parameter>C</parameter>...</optional></optional>
zh_TW: 語法: <option>--split</option> <literal>chapters:all</literal> 或 <option>--split</option> <literal>chapters:</literal><parameter>A</parameter><optional>,<parameter>B</parameter><optional>,<parameter>C</parameter>...</optional></optional>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: Example: <code>--split chapters:5,8</code>
zh_TW: 範例: <code>--split chapters:5,8</code>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: The keyword <literal>all</literal> can be used instead of listing all chapter numbers manually.
zh_TW: 可以使用關鍵字 <literal>all</literal> 取代手動輸入所有章節編號。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><orderedlist><listitem><para>
en: The '<literal>chapters:</literal>' prefix must not be omitted.
zh_TW: '<literal>chapters:</literal>' 首碼的不可省略。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--link-to-previous</option> <parameter>segment-UID</parameter>
zh_TW: <option>--link-to-previous</option> <parameter>剪輯-UID</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--link-to-next</option> <parameter>segment-UID</parameter>
zh_TW: <option>--link-to-next</option> <parameter>剪輯-UID</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--append-mode</option> <parameter>mode</parameter>
zh_TW: <option>--append-mode</option> <parameter>模式</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>[</option> <parameter>file1</parameter> <parameter>file2</parameter> <option>]</option>
zh_TW: <option>[</option> <parameter>檔案1</parameter> <parameter>檔案2</parameter> <option>]</option>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>(</option> <parameter>file1</parameter> <parameter>file2</parameter> <option>)</option>
zh_TW: <option>(</option> <parameter>檔案1</parameter> <parameter>檔案2</parameter> <option>)</option>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: If multiple file names are contained in a pair of parenthesis then those files will be treated as if they were concatenated into a single big file consisting of the content of each of the files one after the other.
zh_TW: 如果一對括號中包含多個檔案名稱，這些檔案視為由單一大型檔案組成，而該大型檔案內容的組成是由一個檔案接著一個檔案的方式形成。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Several things should be noted:
zh_TW: 需要注意以下幾點:

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Attachment support (more global options)
zh_TW: 附件支援(更多全域選項)

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>--attachment-description</option> <parameter>description</parameter>
zh_TW: <option>--attachment-description</option> <parameter>描述</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--attachment-mime-type</option> <parameter>MIME type</parameter>
zh_TW: <option>--attachment-mime-type</option> <parameter>MIME 類型</parameter>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>--attachment-name</option> <parameter>name</parameter>
zh_TW: <option>--attachment-name</option> <parameter>名稱</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--attach-file</option> <parameter>file-name</parameter>, <option>--attach-file-once</option> <parameter>file-name</parameter>
zh_TW: <option>--attach-file</option> <parameter>檔名</parameter>, <option>--attach-file-once</option> <parameter>檔名</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Creates a file attachment inside the &matroska; file. The <abbrev>MIME</abbrev> type must have been set before this option can used. The difference between the two forms is that during splitting the files attached with <option>--attach-file</option> are attached to all output files while the ones attached with <option>--attach-file-once</option> are only attached to the first file created.  If splitting is not used then both do the same.
zh_TW: 在 &matroska; 檔案建立檔案附件。必須先設定 <abbrev>MIME</abbrev> 類型，才能使用此設定。這兩種形式的差別在於分割檔案時：使用 <option>--attach-file</option> 會將附件附加到所有輸出的分割檔案；而使用 <option>--attach-file-once</option> 只會將附件附加到第一個建立的檔案中。如果未有任何分割，輸出結果將相同。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: &mkvextract; can be used to extract attached files from a &matroska; file.
zh_TW: &mkvextract; 可用於從 &matroska; 檔中提取附加檔。

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Options that can be used for each input file
zh_TW: 可用於每個輸入檔的選項

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Default: copy all tracks of this kind.
zh_TW: 預設: 複製此類型的所有軌道。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: The default is to copy all attachments to all output files.
zh_TW: 預設值是將所有附件複製到所有輸出檔案。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Don't copy any audio track from this file.
zh_TW: 不要從此檔案複製任何音訊軌。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Don't copy any video track from this file.
zh_TW: 不要從此檔案複製任何視訊軌。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Don't copy any subtitle track from this file.
zh_TW: 不要從此檔案複製任何字幕軌。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Don't copy any button track from this file.
zh_TW: 不要從此檔案複製任何按鈕軌。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Don't copy any track specific tags from this file.
zh_TW: 不要從此檔複製任何軌道的指定標籤。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Don't copy chapters from this file.
zh_TW: 不要從此檔案複製章節。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Don't copy attachments from this file.
zh_TW: 不要從此檔案複製附件。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Don't copy global tags from this file.
zh_TW: 不要從此檔案複製全域標籤。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--blockadd</option> <parameter>TID:level</parameter>
zh_TW: <option>--blockadd</option> <parameter>TID:層級</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Keep only the <classname>BlockAdditions</classname> up to the level <parameter>level</parameter> for the given track.  The default is to keep all levels.  This option only affects certain kinds of codecs like WAVPACK4.
zh_TW: 僅將 <classname>BlockAdditions</classname> 維持在指定軌道層級的 <parameter>層級</parameter> 。預設為保留所有層級。此選項僅影響某些類型的編碼，例如 WAVPACK4 。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--track-name</option> <parameter>TID:name</parameter>
zh_TW: <option>--track-name</option> <parameter>TID:名稱</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Sets the track name for the given track (see section <link linkend="mkvmerge.track_ids">track IDs</link>) to <parameter>name</parameter>.
zh_TW: 給指定軌道 (請參閱 <link linkend="mkvmerge.track_ids">軌道 ID</link> 章節) 的名稱設定為 <parameter>檔名</parameter>。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--language</option> <parameter>TID:language</parameter>
zh_TW: <option>--language</option> <parameter>TID:語言</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>-t</option>, <option>--tags</option> <parameter>TID:file-name</parameter>
zh_TW: <option>-t</option>, <option>--tags</option> <parameter>TID:檔名</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Currently only <abbrev>AC-3</abbrev>, <abbrev>DTS</abbrev> and <abbrev>TrueHD</abbrev> tracks are affected by this option.
zh_TW: 目前只有 <abbrev>AC-3</abbrev>、<abbrev>DTS</abbrev> 和 <abbrev>TrueHD</abbrev> 軌道受此選項影響。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--timestamps</option> <parameter>TID:file-name</parameter>
zh_TW: <option>--timestamps</option> <parameter>TID:檔名</parameter>

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Options that only apply to video tracks
zh_TW: 僅適用於視訊軌的選項

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--display-dimensions</option> <parameter>TID:widthxheight</parameter>
zh_TW: <option>--display-dimensions</option> <parameter>TID:寬x高</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--aspect-ratio</option> <parameter>TID:ratio|width/height</parameter>
zh_TW: <option>--aspect-ratio</option> <parameter>TID:比例|寬度/高度</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--aspect-ratio-factor</option> <parameter>TID:factor|n/d</parameter>
zh_TW: <option>--aspect-ratio-factor</option> <parameter>TID:係數|n/d</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--cropping</option> <parameter>TID:left,top,right,bottom</parameter>
zh_TW: <option>--cropping</option> <parameter>TID:l至左,至頂,至右,至底</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Valid values and their meaning are:
zh_TW: 有效值其含義為:

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--chroma-subsample</option> <parameter>TID:hori,vert</parameter>
zh_TW: <option>--chroma-subsample</option> <parameter>TID:水平,垂直</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--cb-subsample</option> <parameter>TID:hori,vert</parameter>
zh_TW: <option>--cb-subsample</option> <parameter>TID:水平,垂直</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--chroma-siting</option> <parameter>TID:hori,vert</parameter>
zh_TW: <option>--chroma-siting</option> <parameter>TID:水平,垂直</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: The transfer characteristics of the video.
zh_TW: 視訊的傳輸類型。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Sets the colour primaries of the video.
zh_TW: 設定視訊的主要色彩。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Sets the red/green/blue chromaticity coordinates as defined by CIE 1931.
zh_TW: 設定由 CIE 1931 定義的紅/綠/藍色度座標。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Sets the white colour chromaticity coordinates as defined by CIE 1931.
zh_TW: 設定由 CIE 1931 定義的白色色度座標。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--max-luminance</option> <parameter>TID:float</parameter>
zh_TW: <option>--max-luminance</option> <parameter>TID:浮點數</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--min-luminance</option> <parameter>TID:float</parameter>
zh_TW: <option>--min-luminance</option> <parameter>TID:浮點數</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--projection-type</option> <parameter>TID:method</parameter>
zh_TW: <option>--projection-type</option> <parameter>TID:方式</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--projection-private</option> <parameter>TID:data</parameter>
zh_TW: <option>--projection-private</option> <parameter>TID:資料</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--projection-pose-yaw</option> <parameter>TID:float</parameter>
zh_TW: <option>--projection-pose-yaw</option> <parameter>TID:f漂浮點</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Specifies a yaw rotation to the projection.
zh_TW: 指定繞 Z 軸旋轉至視訊外觀比。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--projection-pose-pitch</option> <parameter>TID:float</parameter>
zh_TW: <option>--projection-pose-pitch</option> <parameter>TID:漂浮點</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Specifies a pitch rotation to the projection.
zh_TW: 指定繞 Y 軸旋轉至視訊外觀比。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--projection-pose-roll</option> <parameter>TID:float</parameter>
zh_TW: <option>--projection-pose-roll</option> <parameter>TID:漂浮點</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Specifies a roll rotation to the projection.
zh_TW: 指定繞 Y 軸旋轉至視訊外觀比。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--stereo-mode</option> <parameter>TID:n|keyword</parameter>
zh_TW: <option>--stereo-mode</option> <parameter>TID:n|關鍵字</parameter>

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Options that only apply to text subtitle tracks
zh_TW: 僅適用於字幕軌的選項

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--sub-charset</option> <parameter>TID:character-set</parameter>
zh_TW: <option>--sub-charset</option> <parameter>TID:字元集</parameter>

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Other options
zh_TW: 其他選項

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>-i</option>, <option>--identify</option> <parameter>file-name</parameter>
zh_TW: <option>-i</option>, <option>--identify</option> <parameter>檔名</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>-J</option> <parameter>file-name</parameter>
zh_TW: <option>-J</option> <parameter>檔名</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: This is a convenient alias for "<literal>--identification-format json --identify file-name</literal>".
zh_TW: 這是 "<literal>--identification-format json --identify 檔名</literal>" 的簡便命名。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>-F</option>, <option>--identification-format</option> <parameter>format</parameter>
zh_TW: <option>-F</option>, <option>--identification-format</option> <parameter>格式</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--probe-range-percentage</option> <parameter>percentage</parameter>
zh_TW: <option>--probe-range-percentage</option> <parameter>百分比</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Lists supported input file types.
zh_TW: 列出已支援的輸入檔案類型。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>--priority</option> <parameter>priority</parameter>
zh_TW: <option>--priority</option> <parameter>優先順序</parameter>

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Sets the character set to convert strings given on the command line from. It defaults to the character set given by system's current locale. This settings applies to arguments of the following options: <link linkend="mkvmerge.description.title"><option>--title</option></link>, <link linkend="mkvmerge.description.track_name"><option>--track-name</option></link> and <link linkend="mkvmerge.description.attachment_description"><option>--attachment-description</option></link>.
zh_TW: 設定在命令列顯示的字串字元集，以轉換為其他字元集。預設為目前系統所在位置指定的字元集。此設置適用於以下選項的參數:<link linkend="mkvmerge.description.title"><option>--title</option></link>, <link linkend="mkvmerge.description.track_name"><option>--track-name</option></link> and <link linkend="mkvmerge.description.attachment_description"><option>--attachment-description</option></link>。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Writes all messages to the file <parameter>file-name</parameter> instead of to the console.  While this can be done easily with output redirection there are cases in which this option is needed: when the terminal reinterprets the output before writing it to a file.  The character set set with <link linkend="mkvmerge.description.output_charset"><option>--output-charset</option></link> is honored.
zh_TW: 將所有訊息寫入到檔案 <parameter>檔名</parameter> 而不是命令列。儘管使用輸出重新導向可以輕鬆完成此操作，但在某些情況下需要使用此選項: 當終端在將輸出寫入文件之前重新解釋（覆蓋）輸出時。  優先使用通過 <link linkend="mkvmerge.description.output_charset"><option>--output-charset</option></link> 設定字元集。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Turn on experimental features. A list of available features can be requested with <command>mkvmerge --engage list</command>. These features are not meant to be used in normal situations.
zh_TW: 開啟實驗中功能。 透過<command>mkvmerge --engage list</command>啟用可用的列表。這些功能不會在正常情況下使用。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Reads additional command line arguments from the file <parameter>options-file</parameter>. See the section about <link linkend="mkvmerge.option_files">option files</link> for further information.
zh_TW: 從<parameter>檔案選項</parameter>檔讀取其他命令列引數。更多資訊請參閱 <link linkend="mkvmerge.option_files">選項檔案</link> 章節。

note: type: Content of: <refentry><refsect1><title>
en: Usage
zh_TW: 使用方式

note: type: Content of: <refentry><refsect1><title>
en: Option order
zh_TW: 選項順序

note: type: Content of: <refentry><refsect1><screen>
en: $ oggenc -q4 -oMyMovie.ogg MyMovie.wav
zh_TW: $ oggenc -q4 -o我的影片.ogg 我的影片.wav

note: type: Content of: <refentry><refsect1><para>
en: After a couple of minutes you can join video and audio:
zh_TW: 幾分鐘後就可以加入視訊和音訊:

note: type: Content of: <refentry><refsect1><screen>
en: $ mkvmerge -o MyMovie-with-sound.mkv MyMovie.avi MyMovie.ogg
zh_TW: $ mkvmerge -o 我的有聲影片.mkv 我的影片.avi 我的影片.ogg

note: type: Content of: <refentry><refsect1><screen>
en: $ mkvmerge -o MyMovie-with-sound.mkv -A MyMovie.avi MyMovie.ogg
zh_TW: $ mkvmerge -o 我的有聲影片.mkv -A 我的影片.avi 我的影片.ogg

note: type: Content of: <refentry><refsect1><para>
en: Now you can use that ID in the following command line:
zh_TW: 現在可以在以下命令列使用該 ID :

note: type: Content of: <refentry><refsect1><para>
en: The result was fine.
zh_TW: 結果正常。

note: type: Content of: <refentry><refsect1><screen>
en: $ mkvmerge -o mymovie.mkv mymovie.avi mymovie.srt
zh_TW: $ mkvmerge -o 我的影片.mkv 我的影片.avi 我的影片.srt

note: type: Content of: <refentry><refsect1><title>
en: Track IDs
zh_TW: 軌道 ID

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Regular track IDs
zh_TW: 標準軌道 ID

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Special track IDs
zh_TW: 特殊軌道 ID

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Introduction
zh_TW: 簡介

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Byte order markers (BOM)
zh_TW: 位元組順序記號 (BOM)

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Linux and Unix-like systems including macOS
zh_TW: 包含 mac 作業系統的 Linux 與 類Unix 系統

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Command line options
zh_TW: 命令列選項

note: type: Content of: <refentry><refsect1><title>
en: Option files
zh_TW: 選項檔案

note: type: Content of: <refentry><refsect1><title>
en: File linking
zh_TW: 檔案連結

note: type: Content of: <refentry><refsect1><title>
en: Default values
zh_TW: 預設值

note: type: Content of: <refentry><refsect1><refsect2><title>
en: The simple chapter format
zh_TW: 簡易章節格式

note: type: Content of: <refentry><refsect1><refsect2><title>
en: The &xml; based chapter format
zh_TW: 基於 &xml; 的章節格式

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Reading chapters from Blu-rays
zh_TW: 從 Blu-rays 藍光光碟讀取章節

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Reading chapters from DVDs
zh_TW: 從 DVD 光碟讀取章節

note: type: Content of: <refentry><refsect1><refsect2><title>
en: General notes
zh_TW: 一般注意事項

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Example
zh_TW: 範例

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Data types
zh_TW: 資料類型

note: type: Content of: <refentry><refsect1><title>
en: The segment info XML files
zh_TW: 剪輯資訊 XML 檔

note: type: Content of: <refentry><refsect1><title>
en: &matroska; file layout
zh_TW: Matroska 檔案規劃

note: type: Content of: <refentry><refsect1><title>
en: External timestamp files
zh_TW: 外部時間戳記檔案

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Timestamp file format v1
zh_TW: 時間戳記檔案格式 v1

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Timestamp file format v2
zh_TW: 時間戳記檔案格式 v2

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Timestamp file format v3
zh_TW: 時間戳記檔案格式 v3

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Timestamp file format v4
zh_TW: 時間戳記檔案格式 v4

note: type: Content of: <refentry><refsect1><refsect2><para>
en: This format is identical to the v2 format.  The only difference is that the timestamps do not have to be sorted.  This format should almost never be used.
zh_TW: 此格式與 v2 格式一致。 唯一的差別是時間戳記不需要排序。 通常不應使用此格式。

note: type: Content of: <refentry><refsect1><para>
en: &mkvmerge; exits with one of three exit codes:
zh_TW: 使用三個之一的結束代碼結束 &mkvmerge; ：

note: type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
en: <constant>0</constant> -- This exit code means that muxing has completed successfully.
zh_TW: <constant>0</constant> -- 此結束代碼表示合併已成功完成。

note: type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
en: <constant>1</constant> -- In this case &mkvmerge; has output at least one warning, but muxing did continue.  A warning is prefixed with the text '<literal>Warning:</literal>'.  Depending on the issues involved the resulting file might be ok or not.  The user is urged to check both the warning and the resulting file.
zh_TW: <constant>1</constant> -- 在此情況下 &mkvmerge; 輸出時至少有一則警告，但合併動作仍然進行。警告訊息會在前端出現 '<literal>警告:</literal>'字樣。依據問題的程度，生成的檔案也許可用。建議使用者檢視警告訊息與輸出檔。

note: type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
en: <constant>2</constant> -- This exit code is used after an error occurred.  &mkvmerge; aborts right after outputting the error message.  Error messages range from wrong command line arguments over read/write errors to broken files.
zh_TW: <constant>2</constant> -- 此結束代碼用於發生錯誤後。 &mkvmerge; 在輸出錯誤訊息後立即中止動作。錯誤訊息的範圍包含從錯誤命令列參數的讀/寫至檔案損壞。

note: type: Content of: <refentry><refsect1><para>
en: &mkvmerge; uses the default variables that determine the system's locale (e.g. <varname>LANG</varname> and the <varname>LC_*</varname> family). Additional variables:
zh_TW: &mkvmerge; 使用決定系統的地區設定的變數 (例如： <varname>LANG</varname> 與 <varname>LC_*</varname> 系列)。 附加變數：

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <varname>MKVMERGE_DEBUG</varname>, <varname>MKVTOOLNIX_DEBUG</varname> and its short form <varname>MTX_DEBUG</varname>
zh_TW: <varname>MKVMERGE_DEBUG</varname>, <varname>MKVTOOLNIX_DEBUG</varname> 與其的簡短形式 <varname>MTX_DEBUG</varname>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: The content is treated as if it had been passed via the <link linkend="mkvmerge.description.debug"><option>--debug</option></link> option.
zh_TW: 視為通過 <link linkend="mkvmerge.description.debug"><option>--debug</option></link> 選項傳遞的內容。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <varname>MKVMERGE_ENGAGE</varname>, <varname>MKVTOOLNIX_ENGAGE</varname> and its short form <varname>MTX_ENGAGE</varname>
zh_TW: <varname>MKVMERGE_ENGAGE</varname>, <varname>MKVTOOLNIX_ENGAGE</varname> 與其的簡短形式 <varname>MTX_ENGAGE</varname>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: The content is treated as if it had been passed via the <link linkend="mkvmerge.description.engage"><option>--engage</option></link> option.
zh_TW: 視為通過 <link linkend="mkvmerge.description.engage"><option>--engage</option></link> 選項傳遞的內容。

note: type: Content of: <refentry><refsect1><para>
en: Options:
zh_TW: 選項:

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>-p</option>, <option>--parse-mode</option> <parameter>mode</parameter>
zh_TW: <option>-p</option>, <option>--parse-mode</option> <parameter>模式</parameter>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>-e</option>, <option>--edit</option> <parameter>selector</parameter>
zh_TW: <option>-e</option>, <option>--edit</option> <parameter>選擇</parameter>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: See the section about <link linkend="mkvpropedit.edit_selectors">edit selectors</link> for a full description of the syntax.
zh_TW: 完整的語法描述詳細資訊請參閱下列 <link linkend="mkvpropedit.edit_selectors">編輯選擇器</link> 。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>-s</option>, <option>--set</option> <parameter>name</parameter>=<parameter>value</parameter>
zh_TW: <option>-s</option>, <option>--set</option> <parameter>名稱</parameter>=<parameter>數值</parameter>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>-d</option>, <option>--delete</option> <parameter>name</parameter>
zh_TW: <option>-d</option>, <option>--delete</option> <parameter>名稱</parameter>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>-t</option>, <option>--tags</option> <parameter>selector</parameter>:<parameter>filename</parameter>
zh_TW: <option>-t</option>, <option>--tags</option> <parameter>選擇</parameter>:<parameter>檔名</parameter>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>-c</option>, <option>--chapters</option> <parameter>filename</parameter>
zh_TW: <option>-c</option>, <option>--chapters</option> <parameter>檔名</parameter>

note: type: Content of: <refentry><refsect1><para>
en: Actions for handling attachments:
zh_TW: 附件處理執行選項:

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>--add-attachment</option> <parameter>filename</parameter>
zh_TW: <option>--add-attachment</option> <parameter>檔名</parameter>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Adds a new attachment from <parameter>filename</parameter>.
zh_TW: 從 <parameter>檔名</parameter> 增加新的附件。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>--update-attachment</option> <parameter>selector</parameter>
zh_TW: <option>--update-attachment</option> <parameter>選擇</parameter>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>--delete-attachment</option> <parameter>selector</parameter>
zh_TW: <option>--delete-attachment</option> <parameter>選擇</parameter>

note: type: Content of: <refentry><refsect1><para>
en: Options for attachment actions:
zh_TW: 附件執行選項:

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <option>--attachment-mime-type</option> <parameter>mime-type</parameter>
zh_TW: <option>--attachment-mime-type</option> <parameter>MIME 類型</parameter>

note: type: Content of: <refentry><refsect1><para>
en: Other options:
zh_TW: 其他選項:

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Writes all messages to the file <parameter>file-name</parameter> instead of to the console.  While this can be done easily with output redirection there are cases in which this option is needed: when the terminal reinterprets the output before writing it to a file.  The character set set with <link linkend="mkvpropedit.description.output_charset"><option>--output-charset</option></link> is honored.
zh_TW: 將所有訊息寫入到檔案 <parameter>檔名</parameter> 而不是命令列。儘管使用輸出重新導向可以輕鬆完成此操作，但在某些情況下需要使用此選項: 當終端在將輸出寫入文件之前重新解釋（覆蓋）輸出時。  優先使用通過 <link linkend="mkvpropedit.description.output_charset"><option>--output-charset</option></link> 設定字元集。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Turn on experimental features. A list of available features can be requested with <command>mkvpropedit --engage list</command>. These features are not meant to be used in normal situations.
zh_TW: 開啟實驗中功能。 透過<command>mkvpropedit --engage list</command>啟用可用的列表。這些功能不會在正常情況下使用。

note: type: Content of: <refentry><refsect1><title>
en: Edit selectors
zh_TW: 編輯選擇器

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Segment information
zh_TW: 剪輯訊息

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Track headers
zh_TW: 軌道表頭

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
en: Numbering starts at 1.
zh_TW: 從 1 開始編號。

note: type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
en: <option>track:</option>@<parameter>number</parameter>
zh_TW: <option>track:</option>@<parameter>編號</parameter>

note: type: Content of: <refentry><refsect1><refsect2><title>
en: Notes
zh_TW: 備註

note: type: Content of: <refentry><refsect1><title>
en: Attachment selectors
zh_TW: 附件選擇

note: type: Content of: <refentry><refsect1><para>
en: Replacing one attached font (<literal>Comic.ttf</literal>) file with another one (<literal>Arial.ttf</literal>):
zh_TW: 將一個附加字型 (<literal>Comic.ttf</literal>) 檔取代成另一個 (<literal>Arial.ttf</literal>):

note: type: Content of: <refentry><refsect1><para>
en: Deleting the second attached file, whatever it may be:
zh_TW: 刪除第二個附加檔，無論可能是什麼:

note: type: Content of: <refentry><refsect1><para>
en: Deleting all attached fonts by MIME type:
zh_TW: 依 MIME 類型刪除所有附加的字型:

note: type: Content of: <refentry><refsect1><para>
en: &mkvpropedit; exits with one of three exit codes:
zh_TW: 使用三個之一的結束代碼結束 &mkvpropedit; ：

note: type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
en: <constant>0</constant> -- This exit code means that the modification has completed successfully.
zh_TW: <constant>0</constant> -- 此結束代碼表示修正已成功完成。

note: type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
en: <constant>1</constant> -- In this case &mkvpropedit; has output at least one warning, but the modification did continue.  A warning is prefixed with the text '<literal>Warning:</literal>'.  Depending on the issues involved the resulting files might be ok or not.  The user is urged to check both the warning and the resulting files.
zh_TW: <constant>1</constant> -- 在此情況下 &mkvpropedit; 輸出時至少有一則警告，但編輯動作仍然進行。警告訊息會在前端出現 '<literal>Warning:</literal>' 字樣。依據問題的程度，生成的檔案也許可用。建議使用者檢視警告訊息與輸出檔。

note: type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
en: <constant>2</constant> -- This exit code is used after an error occurred.  &mkvpropedit; aborts right after outputting the error message.  Error messages range from wrong command line arguments over read/write errors to broken files.
zh_TW: <constant>2</constant> -- 此結束代碼用於發生錯誤後。 &mkvpropedit; 在輸出錯誤訊息後立即中止動作。錯誤訊息的範圍包含從錯誤命令列參數的讀/寫至檔案損壞。

note: type: Content of: <refentry><refsect1><para>
en: &mkvpropedit; uses the default variables that determine the system's locale (e.g. <varname>LANG</varname> and the <varname>LC_*</varname> family). Additional variables:
zh_TW: &mkvpropedit; 使用決定系統的地區設定的變數 (例如： <varname>LANG</varname> 與 <varname>LC_*</varname> 系列)。 附加變數：

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <varname>MKVPROPEDIT_DEBUG</varname>, <varname>MKVTOOLNIX_DEBUG</varname> and its short form <varname>MTX_DEBUG</varname>
zh_TW: <varname>MKVPROPEDIT_DEBUG</varname>, <varname>MKVTOOLNIX_DEBUG</varname> 與其的簡短形式 <varname>MTX_DEBUG</varname>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: The content is treated as if it had been passed via the <link linkend="mkvpropedit.description.debug"><option>--debug</option></link> option.
zh_TW: 視為通過 <link linkend="mkvpropedit.description.debug"><option>--debug</option></link> 選項傳遞的內容。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
en: <varname>MKVPROPEDIT_ENGAGE</varname>, <varname>MKVTOOLNIX_ENGAGE</varname> and its short form <varname>MTX_ENGAGE</varname>
zh_TW: <varname>MKVPROPEDIT_ENGAGE</varname>, <varname>MKVTOOLNIX_ENGAGE</varname> 與其簡短形式 <varname>MTX_ENGAGE</varname>

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: The content is treated as if it had been passed via the <link linkend="mkvpropedit.description.engage"><option>--engage</option></link> option.
zh_TW: 視為通過 <link linkend="mkvpropedit.description.engage"><option>--engage</option></link> 選項傳遞的內容。

note: type: Content of: <refentry><refnamediv><refpurpose>
en: a GUI for &mkvmerge; including a chapter and a header editor
zh_TW: &mkvmerge; 的使用者介面，包含表頭編輯與章節編輯

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: All following file names will be added as source files to the current multiplex job. This is the default mode.
zh_TW: 以下所有檔案名稱都以原始檔案加入至目前的合併工具作業中。這是預設模式。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: All following file names will be opened in the info tool.
zh_TW: 將在資訊工具中將開啟以下所有檔案名稱。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Additionally the info tool will be selected on startup instead of the multiplexer tool.
zh_TW: 此外，在啟動時選擇資訊工具，而不是合併工具。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: All following file names will be opened in the chapter editor.
zh_TW: 將在章節編輯中將開啟以下所有檔案名稱。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Additionally the chapter editor will be selected on startup instead of the multiplexer tool.
zh_TW: 此外，在啟動時選擇章節編輯，而不是合併工具。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: All following file names will be opened in the header editor.
zh_TW: 將在表頭編輯中將開啟以下所有檔案名稱。

note: type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
en: Additionally the header editor will be selected on startup instead of the multiplexer tool.
zh_TW: 此外，在啟動時選擇表頭編輯，而不是合併工具。

note: type: Content of: <xsl:stylesheet><xsl:template><div><h1><xsl:text>
en: Table of contents
zh_TW: 目錄

note: type: Content of: <xsl:stylesheet><xsl:template><div><p>
en: Important:
zh_TW: 重要:

note: type: Content of: <xsl:stylesheet><xsl:template><div><p>
en: Note:
zh_TW: 備註:

note: type: Content of: <xsl:stylesheet><xsl:template><table><thead><tr><th>
en: Option
zh_TW: 選項
