#! @EXPECT_PATH@ --
##
## @PACKAGE@ @VERSION@
@copyright@
#
# hlogin - hp login
#

# Sometimes routers take awhile to answer (the default is 10 sec)
set timeoutdflt 45
# Some CLIs having problems if we write too fast (Extreme, PIX, Cat)
set send_human {.2 .1 .4 .2 1}

@login_top@

# Log into the router.
# returns: 0 on success, 1 on failure
proc login { router user userpswd passwd enapasswd cmethod cyphertype identfile } {
    global spawn_id in_proc do_command do_script passphrase
    global prompt u_prompt p_prompt e_prompt sshcmd telnetcmd
    set in_proc 1

    # try each of the connection methods in $cmethod until one is successful
    set progs [llength $cmethod]
    foreach prog [lrange $cmethod 0 end] {
	incr progs -1
	regexp {(telnet|ssh)(:([^[:space:]]+))*} $prog command suffix junk port
	if [string match "telnet*" $prog] {
	    if {"$port" == ""} {
		if { $do_command || $do_script } {
		    set retval [ catch {eval spawn [split "hpuifilter -- $telnetcmd $router"]} reason ]
		} else {
		    set retval [ catch {eval spawn [split "$telnetcmd $router"]} reason ]
		}
	    } else {
		if { $do_command || $do_script } {
		    set retval [ catch {eval spawn [split "hpuifilter -- $telnetcmd $router $port"]} reason ]
		} else {
		    set retval [ catch {eval spawn [split "$telnetcmd $router $port"]} reason ]
		}
	    }
	    if { $retval } {
		send_user "\nError: telnet failed: $reason\n"
		return 1
	    }
	} elseif [string match "ssh*" $prog] {
	    # ssh to the router & try to login with or without an identfile.
	    regexp {ssh(:([^[:space:]]+))*} $prog methcmd suffix port
	    set cmd $sshcmd
	    if {"$port" != ""} {
		set cmd "$cmd -p $port"
	    }
	    if {"$cyphertype" != ""} {
		set cmd "$cmd -c $cyphertype"
	    }
	    if {"$identfile" != ""} {
		set cmd "$cmd -i $identfile"
	    }
	    if { $do_command || $do_script } {
		set retval [ catch {eval spawn hpuifilter -- [split "$cmd -x -l $user $router" { }]} reason ]
	    } else {
		set retval [ catch {eval spawn [split "$cmd -x -l $user $router" { }]} reason ]
	    }
	    if { $retval } {
		send_user "\nError: $cmd failed: $reason\n"
		return 1
	    }
	} elseif ![string compare $prog "rsh"] {
	    send_error "\nError: unsupported method: rsh\n"
	    if { $progs == 0 } {
		return 1
	    }
	    continue;
	} else {
	    send_user "\nError: unknown connection method: $prog\n"
	    return 1
	}
	sleep 0.3

	# This helps cleanup each expect clause.
	expect_after {
	    timeout {
		global in_proc
		send_user "\nError: TIMEOUT reached\n"
		catch {close}; catch {wait};
		if {$in_proc} {
		    return 1
		} else {
		    continue
		}
	    } eof {
		global in_proc
		send_user "\nError: EOF received\n"
		catch {close}; catch {wait};
		if {$in_proc} {
		    return 1
		} else {
		    continue
		}
	    }
	}

    # Here we get a little tricky.  There are several possibilities:
    # the router can ask for a username and passwd and then
    # talk to the TACACS server to authenticate you, or if the
    # TACACS server is not working, then it will use the enable
    # passwd.  Or, the router might not have TACACS turned on,
    # then it will just send the passwd.
    # if telnet fails with connection refused, try ssh
    expect {
	"Press any key to continue" {
	    send "\r"
	    exp_continue
	}
	"Enter switch number to connect to or <CR>:" {
	    send "\r"
	    exp_continue
	}
	-re "(Connection refused|Secure connection \[^\n\r]+ refused|Connection closed by)" {
	    catch {close}; catch {wait};
	    if !$progs {
		send_user "\nError: Connection Refused ($prog)\n"; return 1
	    }
	}
	"Host is unreachable" {
	    catch {close}; catch {wait};
	    send_user "\nError: Host Unreachable!\n"; wait; return 1
	}
	"No address associated with name" {
	    catch {close}; catch {wait};
	    send_user "\nError: Unknown host\n"; wait; return 1
	}
	-re "(Host key not found |The authenticity of host .* be established)" {
	    expect {
		-re "\\(yes\/no\[^\\)]*\\)\\?" {
					  send "yes\r";
					  send_user "\nHost $router added to the list of known hosts.\n"
					 }
		-re "\[^\r\n]*\[\r\n]+"	{ exp_continue; }
	    }
	    exp_continue
	}
	-re "HOST IDENTIFICATION HAS CHANGED" {
	    send_user "\nError: The host key for $router has changed.  Update the SSH known_hosts file accordingly.\n"
	    expect {
		-re "\\(yes\/no\\)\\?"	{ send "no\r" }
		-re " strict checking\.\[\r\n]+" { }
		-re "\[^\r\n]*\[\r\n]+"	{ exp_continue; }
	    }
	    catch {close}; catch {wait};
	    return 1
	}
	-re "Offending key for " {
	    send_user "\nError: host key mismatch for $router.  Update the SSH known_hosts file accordingly.\n"
	    expect {
		-re "\\(yes\/no\\)\\?"	{ send "no\r" }
		-re "\[^\r\n]*\[\r\n]+"	{ exp_continue; }
	    }
	    catch {close}; catch {wait};
	    return 1
	}
	-nocase -re "^warning: remote host denied authentication agent forwarding." {
	    exp_continue;
	}
	eof { send_user "\nError: Couldn't login\n"; wait; return 1 }
	-nocase "unknown host\r" {
	    catch {close}; catch {wait};
	    send_user "\nError: Unknown host\n"; wait; return 1
	}
	-re "Enter passphrase.*: " {
	    # sleep briefly to allow time for stty -echo
	    sleep 1
	    send -- "$passphrase\r"
	    exp_continue
	}
	-re "$u_prompt"	{ send -- "$user\r"
	    expect {
		eof			{ send_user "\nError: Couldn't login\n"; wait; return 1 }
		"Login invalid"		{ send_user "\nError: Invalid login\n";
					  catch {close}; catch {wait};
					  return 1 }
		-re "$p_prompt"		{ send -- "$userpswd\r" }
		-re "$prompt"		{ set in_proc 0; return 0 }
		-re "\[^\r\n]*\[\r\n]+"	{ exp_continue; }
		"Press any key to continue" {
					  send " "
					  exp_continue
					}
	    }
	    exp_continue
	}
	-re "$p_prompt"	{
	    if ![string compare $prog "ssh"] {
		send -- "$userpswd\r"
	    } else {
		send -- "$passwd\r"
	    }
	    expect {
		eof		{ send_user "\nError: Couldn't login\n";
				  wait;
				  return 1
				}
		"Press any key to continue" {
				  send " ";
				  exp_continue
				}
		-re "$e_prompt"	{ send -- "$enapasswd\r" }
		-re "$prompt"	{ set in_proc 0;
				  return 0
				}
		-re "\[^\r\n]*\[\r\n]+"	{ exp_continue; }
	    }
	    exp_continue
	}
	-re "\[^\r\n]*\[\r\n]+"	{ exp_continue; }
	-re "$prompt"		{ break; }
	denied		{ send_user "\nError: Check your passwd for $router\n"
			  catch {close}; catch {wait}; return 1
			}
	"% Bad passwords" {send_user "\nError: Check your passwd for $router\n"; return 1 }
     }
    }

    set in_proc 0
    return 0
}

# Enable
proc do_enable { enauser enapasswd } {
    global prompt in_proc
    global u_prompt e_prompt
    set in_proc 1

    send "enable\r"
    expect {
	-re "$u_prompt"	{ send -- "$enauser\r"; exp_continue}
	-re "$e_prompt"	{ send -- "$enapasswd\r"; exp_continue}
	"#"		{ set prompt "#" }
	"(enable)"	{ set prompt "> (enable) " }
	denied		{ send_user "\nError: Check your Enable passwd\n"; return 1}
	"% Bad passwords" { send_user "\nError: Check your Enable passwd\n"
	    return 1
	}
    }
    # We set the prompt variable (above) so script files don't need
    # to know what it is.
    set in_proc 0
    return 0
}

# Run commands given on the command line.
proc run_commands { prompt command } {
    global do_interact do_saveconfig in_proc
    set in_proc 1

    # Escape regex meta characters in the $prompt
    # match cisco config mode prompts too, such as router(config-if)#
    regsub -lineanchor -- {^(.{1,11}).*([#>] ?)$} $prompt {\1} reprompt
    regsub -all -- {[\\]$} $reprompt {} reprompt
    append reprompt {([^#>\r\n]+)?[#>](\\([^)\\r\\n]+\\))?}
    # this is the only way i see to get rid of more prompts in o/p..grrrrr
    log_user 0

    # handle escaped ;s in commands, and ;; and ^;
    regsub -all {([^\\]);} $command "\\1\u0002;" esccommand
    regsub -all {([^\\]);;} $esccommand "\\1;\u0002;" command
    regsub {^;} $command "\u0002;" esccommand
    regsub -all {[\\];} $esccommand ";" command
    regsub -all {\u0002;} $command "\u0002" esccommand
    set sep "\u0002"
    set commands [split $esccommand $sep]
    set num_commands [llength $commands]
    # if the pager can not be turned off, we have to look for the "More"
    # prompt.
    for {set i 0} {$i < $num_commands} { incr i} {
	send -- "[subst -nocommands [lindex $commands $i]]\r"
	expect {
	    -re "^\[^\n\r *]*$reprompt"	{ catch {send_user -- "$expect_out(buffer)"} }
	    -re "^\[^\n\r]*$reprompt "	{ catch {send_user -- "$expect_out(buffer)"} }
	    -re "\[\n\r]+"		{ catch {send_user -- "$expect_out(buffer)"}
					  exp_continue }
	    -re "\[^\r\n]*Press <SPACE> to cont\[^\r\n]*"	{
					  catch {send " "};
					  expect {
						# gag, 2 more prompts
						-re "\[\r\n]*\r" {}
						-re "\[^\r\n]*Press <SPACE> to cont\[^\r\n]*"	{
						    catch {send " "};
						    exp_continue
						}
					  }
					  exp_continue
					}
	    -re "^More: \[^\n\r]* line:" { catch {send " "}
					  exp_continue }
	    -re "^<-+ More -+>\[^\n\r]*" { catch {send " "}
					  exp_continue }
	    -re "^-+ MORE -+\[^\n\r]*"	{ catch {send " "}
					  exp_continue }
	    # 3 flavours of the more prompt, -- first -More-, then --More-- (for
	    # cisco/riverhead AGM), then with more dashes.
	    -re "^-More-\[^\n\r-]*"	{ catch {send " "}
					  exp_continue }
	    -re "^--More--\[^\n\r-]*"	{ catch {send " "}
					  exp_continue }
	    -re "^---+More---+\[^\n\r]*" {
					  catch {send " "}
					  exp_continue }
	    -re "\b+"			{ exp_continue }
	}
    }
    log_user 1

    if { $do_interact == 1 } {
	interact
	return 0
    }

    send -h "logout\r"
    expect {
	-re "Do you want to save (the )?current configuration"	{
						  if {$do_saveconfig} {
						    catch {send "y\r"}
						  } else {
						    catch {send "n\r"}
						  }
						  exp_continue
						}
	"Do you wish to save "			{
						  if {$do_saveconfig} {
						    catch {send "y\r"}
						  } else {
						    catch {send "n\r"}
						  }
						  exp_continue
						}
	"Do you want to log out" 		{
						  catch {send "y\r"}
						  exp_continue
						}
	-re "\[\r\n]+"				{ exp_continue }
	-re "^.+\[#>]"				{ # some require logout from
						  # enabled, then the login, and
						  # some do not have logout cmd
						  catch {send -h "exit\r"}
						  exp_continue
						}
	timeout					{ catch {close}; catch {wait};
						  return 0
						}
	eof					{ return 0 }
    }
    set in_proc 0
}

#
# For each router... (this is main loop)
#
source_password_file $password_file
set in_proc 0
set exitval 0
# if we have dont have a tty, we need some additional terminal settings
if [catch {open /dev/tty w} ttyid] {
    # no tty, ie: cron
    set spawnopts "-nottycopy"
    set stty_init "cols 132"
} else {
    catch {close ttyid} reason
}
foreach router [lrange $argv $i end] {
    set router [string tolower $router]
    send_user "$router\n"

    # device timeout
    set timeout [find timeout $router]
    if { [llength $timeout] == 0 } {
	set timeout $timeoutdflt
    }

    # Default prompt.
    set prompt [join [find prompt $router] ""]
    if { [llength $prompt] == 0 } {
        set prompt "(>|#) ?"
    }

    # look for autoenable option in .cloginrc & cmd-line
    set ae [find autoenable $router]
    if { "$ae" == "1" || $avautoenable } {
	set autoenable 1
    } else {
	set autoenable 0
    }
    # look for enable options in .cloginrc & cmd-line
    if { $avenable == 0 } {
	set enable 0
    } else {
	set ne [find noenable $router]
	if { "$ne" == "1" || "$autoenable" == "1" } {
	    set enable 0
	} else {
	    set enable 1
	}
    }

    # Figure out passwords
    if { $do_passwd || $do_enapasswd } {
	set pswd [find password $router]
	if { [llength $pswd] == 0 } {
	    send_user -- "\nError: no password for $router in $password_file.\n"
	    continue
	}
	if { $enable && $do_enapasswd && $autoenable == 0 && [llength $pswd] < 2 } {
	    send_user -- "\nError: no enable password for $router in $password_file.\n"
	    continue
	}
	if { $do_passwd } {
	    set passwd [join [lindex $pswd 0] ""]
	} else {
	    set passwd $userpasswd
	}
	if { $do_enapasswd } {
	    set enapasswd [join [lindex $pswd 1] ""]
	} else {
	    set enapasswd $enapasswd
	}
    } else {
	set passwd $userpasswd
	set enapasswd $enapasswd
    }

    # Figure out username
    if {[info exists username]} {
      # command line username
      set ruser $username
    } else {
      set ruser [join [find user $router] ""]
      if { "$ruser" == "" } { set ruser $default_user }
    }

    # Figure out username's password (if different from the vty password)
    if {[info exists userpasswd]} {
      # command line username
      set userpswd $userpasswd
    } else {
      set userpswd [join [find userpassword $router] ""]
      if { "$userpswd" == "" } { set userpswd $passwd }
    }

    # Figure out enable username
    if {[info exists enausername]} {
      # command line enausername
      set enauser $enausername
    } else {
      set enauser [join [find enauser $router] ""]
      if { "$enauser" == "" } { set enauser $ruser }
    }

    # Figure out prompts
    set u_prompt [find userprompt $router]
    if { "$u_prompt" == "" } {
	set u_prompt "(\[Uu]sername|\[Ll]ogin|\[Uu]ser \[Nn]ame|^\[Uu]ser|Login Name):"
    } else {
	set u_prompt [join [lindex $u_prompt 0] ""]
    }
    set p_prompt [find passprompt $router]
    if { "$p_prompt" == "" } {
	set p_prompt "(\[Pp]assword|passwd):"
    } else {
	set p_prompt [join [lindex $p_prompt 0] ""]
    }
    set e_prompt [find enableprompt $router]
    if { "$e_prompt" == "" } {
	set e_prompt "\[Pp]assword:"
    } else {
	set e_prompt [join [lindex $e_prompt 0] ""]
    }

    # Figure out identity file to use
    set identfile [join [lindex [find identity $router] 0] ""]

    # Figure out passphrase to use
    if {[info exists avpassphrase]} {
	set passphrase $avpassphrase
    } else {
	set passphrase [join [lindex [find passphrase $router] 0] ""]
    }
    if { ! [string length "$passphrase"]} {
	set passphrase $passwd
    }

    # Figure out cypher type
    if {[info exists cypher]} {
      # command line cypher type
      set cyphertype $cypher
    } else {
      set cyphertype [find cyphertype $router]
    }

    # Figure out connection method
    set cmethod [find method $router]
    if { "$cmethod" == "" } { set cmethod {{telnet} {ssh}} }

    # Figure out the SSH executable name
    set sshcmd [join [lindex [find sshcmd $router] 0] ""]
    if { "$sshcmd" == "" } { set sshcmd {ssh} }

    # Figure out the telnet executable name
    set telnetcmd [join [lindex [find telnetcmd $router] 0] ""]
    if { "$telnetcmd" == "" } { set telnetcmd "@TELNET_CMD@" }

    # if [-mM], skip do not login
    if { $do_cloginrcdbg > 0 } { continue; }

    # Adjust our path to find hpuifilter
    set hpf_path ""
    regexp {(.*)/[^/]+} $argv0 junk hpf_path
    if { "$hpf_path" != "" && "$hpf_path" != "." } {
	append env(PATH) ":$hpf_path"
    }

    # Login to the router
    if {[login $router $ruser $userpswd $passwd $enapasswd $cmethod $cyphertype $identfile]} {
	incr exitval
	continue
    }
    if { $enable } {
	if {[do_enable $enauser $enapasswd]} {
	    if { $do_command || $do_script } {
		incr exitval
		catch {close}; catch {wait};
		continue
	    }
	}
    }

    if { $do_command || $do_script } {
	# we are logged in, now figure out the full prompt
	send "\r"
	expect {
	    -re "\[\r\n]+"	{ exp_continue; }
	    -re "^.+$prompt"	{ set junk $expect_out(0,string);
				  regsub -all "\[\]\[\(\)+]" $junk {\\&} prompt;
				}
	}
	# set a wide tty width.
	set stty_init "cols 132"
	# disable the pager
	send "no page\r"
	expect -re $prompt	{}
	# Ciena Waveserver o/s
	# system shell session set window-height <NUMBER: 0..999>
	# system shell session set window-width <NUMBER: 0..999>
	# system shell session set more (off|on)
	send "system shell session set more off\r"
	expect -re $prompt	{}
    }
    if { $do_command } {
	if {[run_commands $prompt $command]} {
	    incr exitval
	    continue
	}
    } elseif { $do_script } {
	source $sfile
	catch {close};
    } else {
	label $router
	log_user 1
	interact
    }

    # End of for each router
    catch {wait};
    sleep 0.3
}
exit $exitval