# Makefile.in generated by automake 1.16.2 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2020 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Copyright 2018, see the COPYRIGHT file for more information.
# This file builds and runs the ncdump program.

# Ed Hartnett, Dennis Heimbigner, Ward Fisher

#SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver-verbose
#sh_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver-verbose
#LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver-verbose
#TESTS_ENVIRONMENT = export SETX=1;

# This is part of the netCDF package.
# Copyright 2018 University Corporation for Atmospheric Research/Unidata
# See COPYRIGHT file for conditions of use.
#
# Assemble the CPPFLAGS and LDFLAGS that point to all the needed
# libraries for netCDF-4.
#

VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
@USE_DAP_TRUE@am__append_1 = -I${top_srcdir}/oc2
noinst_PROGRAMS = ncvalidator$(EXEEXT) $(am__EXEEXT_2) $(am__EXEEXT_3)
bin_PROGRAMS = ncdump$(EXEEXT) nccopy$(EXEEXT)

# A simple netcdf-4 metadata -> xml printer. Do not install.
@USE_HDF5_TRUE@am__append_2 = nc4print

# Conditionally build the ocprint program, but do not install
@ENABLE_DAP_TRUE@am__append_3 = ocprint
@BUILD_TESTSETS_TRUE@check_PROGRAMS = rewrite-scalar$(EXEEXT) \
@BUILD_TESTSETS_TRUE@	ref_ctest$(EXEEXT) ref_ctest64$(EXEEXT) \
@BUILD_TESTSETS_TRUE@	ncdump$(EXEEXT) tst_utf8$(EXEEXT) \
@BUILD_TESTSETS_TRUE@	bom$(EXEEXT) tst_dimsizes$(EXEEXT) \
@BUILD_TESTSETS_TRUE@	nctrunc$(EXEEXT) $(am__EXEEXT_1)
@BUILD_TESTSETS_TRUE@TESTS = tst_inttags.sh run_tests.sh tst_64bit.sh \
@BUILD_TESTSETS_TRUE@	ref_ctest$(EXEEXT) ref_ctest64$(EXEEXT) \
@BUILD_TESTSETS_TRUE@	tst_output.sh tst_lengths.sh \
@BUILD_TESTSETS_TRUE@	tst_calendars.sh run_utf8_tests.sh \
@BUILD_TESTSETS_TRUE@	test_unicode_directory.sh tst_nccopy3.sh \
@BUILD_TESTSETS_TRUE@	tst_nccopy3_subset.sh tst_charfill.sh \
@BUILD_TESTSETS_TRUE@	tst_iter.sh tst_formatx3.sh tst_bom.sh \
@BUILD_TESTSETS_TRUE@	tst_dimsizes.sh run_ncgen_tests.sh \
@BUILD_TESTSETS_TRUE@	tst_ncgen4_classic.sh test_radix.sh \
@BUILD_TESTSETS_TRUE@	tst_null_byte_padding.sh $(am__append_5) \
@BUILD_TESTSETS_TRUE@	$(am__append_7) tst_inmemory_nc3.sh \
@BUILD_TESTSETS_TRUE@	tst_nccopy_w3.sh $(am__append_8)
@BUILD_TESTSETS_TRUE@@USE_STRICT_NULL_BYTE_HEADER_PADDING_TRUE@am__append_4 = tst_null_byte_padding.sh
@BUILD_TESTSETS_TRUE@@LARGE_FILE_TESTS_TRUE@am__append_5 = tst_iter.sh

# NetCDF-4 has some extra C programs to build. These will be run by
# the shell script tests.
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@am__append_6 = tst_fileinfo \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_create_files \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_h_rdc0 tst_group_data \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_enum_data \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_opaque_data \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_string_data \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_vlen_data tst_comp \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_comp2 tst_nans \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_special_atts \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_unicode tst_fillbug \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_compress tst_chunking \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_h_scalar tst_vlen_demo

# Tests for netCDF-4 behavior.
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@am__append_7 = tst_fileinfo.sh tst_hdf5_offset.sh tst_inttags4.sh		\
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@tst_netcdf4.sh tst_fillbug.sh tst_netcdf4_4.sh tst_nccopy4.sh		\
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@tst_nccopy5.sh tst_grp_spec.sh tst_mud.sh tst_h_scalar.sh tst_formatx4.sh		\
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@run_utf8_nc4_tests.sh run_back_comp_tests.sh run_ncgen_nc4_tests.sh	\
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@tst_ncgen4.sh


# Re-activate the ncgen -lc tests
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@am__append_8 =  \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_inmemory_nc4.sh \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_nccopy_w4.sh \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_ctests.sh
subdir = ncdump
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@am__EXEEXT_1 =  \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_fileinfo$(EXEEXT) \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_create_files$(EXEEXT) \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_h_rdc0$(EXEEXT) \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_group_data$(EXEEXT) \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_enum_data$(EXEEXT) \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_opaque_data$(EXEEXT) \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_string_data$(EXEEXT) \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_vlen_data$(EXEEXT) \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_comp$(EXEEXT) \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_comp2$(EXEEXT) \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_nans$(EXEEXT) \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_special_atts$(EXEEXT) \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_unicode$(EXEEXT) \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_fillbug$(EXEEXT) \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_compress$(EXEEXT) \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_chunking$(EXEEXT) \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_h_scalar$(EXEEXT) \
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@	tst_vlen_demo$(EXEEXT)
@USE_HDF5_TRUE@am__EXEEXT_2 = nc4print$(EXEEXT)
@ENABLE_DAP_TRUE@am__EXEEXT_3 = ocprint$(EXEEXT)
PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
bom_SOURCES = bom.c
bom_OBJECTS = bom.$(OBJEXT)
bom_LDADD = $(LDADD)
bom_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 = 
am__nc4print_SOURCES_DIST = nc4print.c
@USE_HDF5_TRUE@am_nc4print_OBJECTS = nc4print.$(OBJEXT)
nc4print_OBJECTS = $(am_nc4print_OBJECTS)
nc4print_LDADD = $(LDADD)
nc4print_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
am_nccopy_OBJECTS = nccopy.$(OBJEXT) nciter.$(OBJEXT) \
	chunkspec.$(OBJEXT) utils.$(OBJEXT) dimmap.$(OBJEXT) \
	list.$(OBJEXT)
nccopy_OBJECTS = $(am_nccopy_OBJECTS)
nccopy_LDADD = $(LDADD)
nccopy_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
am_ncdump_OBJECTS = ncdump.$(OBJEXT) vardata.$(OBJEXT) \
	dumplib.$(OBJEXT) indent.$(OBJEXT) nctime0.$(OBJEXT) \
	utils.$(OBJEXT) nciter.$(OBJEXT)
ncdump_OBJECTS = $(am_ncdump_OBJECTS)
ncdump_LDADD = $(LDADD)
ncdump_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
nctrunc_SOURCES = nctrunc.c
nctrunc_OBJECTS = nctrunc.$(OBJEXT)
nctrunc_LDADD = $(LDADD)
nctrunc_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
am_ncvalidator_OBJECTS = ncvalidator.$(OBJEXT)
ncvalidator_OBJECTS = $(am_ncvalidator_OBJECTS)
ncvalidator_LDADD = $(LDADD)
ncvalidator_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
am__ocprint_SOURCES_DIST = ocprint.c
@ENABLE_DAP_TRUE@am_ocprint_OBJECTS = ocprint.$(OBJEXT)
ocprint_OBJECTS = $(am_ocprint_OBJECTS)
ocprint_LDADD = $(LDADD)
ocprint_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
ref_ctest_SOURCES = ref_ctest.c
ref_ctest_OBJECTS = ref_ctest.$(OBJEXT)
ref_ctest_LDADD = $(LDADD)
ref_ctest_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
ref_ctest64_SOURCES = ref_ctest64.c
ref_ctest64_OBJECTS = ref_ctest64.$(OBJEXT)
ref_ctest64_LDADD = $(LDADD)
ref_ctest64_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
rewrite_scalar_SOURCES = rewrite-scalar.c
rewrite_scalar_OBJECTS = rewrite-scalar.$(OBJEXT)
rewrite_scalar_LDADD = $(LDADD)
rewrite_scalar_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_chunking_SOURCES = tst_chunking.c
tst_chunking_OBJECTS = tst_chunking.$(OBJEXT)
tst_chunking_LDADD = $(LDADD)
tst_chunking_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_comp_SOURCES = tst_comp.c
tst_comp_OBJECTS = tst_comp.$(OBJEXT)
tst_comp_LDADD = $(LDADD)
tst_comp_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_comp2_SOURCES = tst_comp2.c
tst_comp2_OBJECTS = tst_comp2.$(OBJEXT)
tst_comp2_LDADD = $(LDADD)
tst_comp2_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_compress_SOURCES = tst_compress.c
tst_compress_OBJECTS = tst_compress.$(OBJEXT)
tst_compress_LDADD = $(LDADD)
tst_compress_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_create_files_SOURCES = tst_create_files.c
tst_create_files_OBJECTS = tst_create_files.$(OBJEXT)
tst_create_files_LDADD = $(LDADD)
tst_create_files_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_dimsizes_SOURCES = tst_dimsizes.c
tst_dimsizes_OBJECTS = tst_dimsizes.$(OBJEXT)
tst_dimsizes_LDADD = $(LDADD)
tst_dimsizes_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_enum_data_SOURCES = tst_enum_data.c
tst_enum_data_OBJECTS = tst_enum_data.$(OBJEXT)
tst_enum_data_LDADD = $(LDADD)
tst_enum_data_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_fileinfo_SOURCES = tst_fileinfo.c
tst_fileinfo_OBJECTS = tst_fileinfo.$(OBJEXT)
tst_fileinfo_LDADD = $(LDADD)
tst_fileinfo_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_fillbug_SOURCES = tst_fillbug.c
tst_fillbug_OBJECTS = tst_fillbug.$(OBJEXT)
tst_fillbug_LDADD = $(LDADD)
tst_fillbug_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_group_data_SOURCES = tst_group_data.c
tst_group_data_OBJECTS = tst_group_data.$(OBJEXT)
tst_group_data_LDADD = $(LDADD)
tst_group_data_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_h_rdc0_SOURCES = tst_h_rdc0.c
tst_h_rdc0_OBJECTS = tst_h_rdc0.$(OBJEXT)
tst_h_rdc0_LDADD = $(LDADD)
tst_h_rdc0_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_h_scalar_SOURCES = tst_h_scalar.c
tst_h_scalar_OBJECTS = tst_h_scalar.$(OBJEXT)
tst_h_scalar_LDADD = $(LDADD)
tst_h_scalar_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_nans_SOURCES = tst_nans.c
tst_nans_OBJECTS = tst_nans.$(OBJEXT)
tst_nans_LDADD = $(LDADD)
tst_nans_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_opaque_data_SOURCES = tst_opaque_data.c
tst_opaque_data_OBJECTS = tst_opaque_data.$(OBJEXT)
tst_opaque_data_LDADD = $(LDADD)
tst_opaque_data_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_special_atts_SOURCES = tst_special_atts.c
tst_special_atts_OBJECTS = tst_special_atts.$(OBJEXT)
tst_special_atts_LDADD = $(LDADD)
tst_special_atts_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_string_data_SOURCES = tst_string_data.c
tst_string_data_OBJECTS = tst_string_data.$(OBJEXT)
tst_string_data_LDADD = $(LDADD)
tst_string_data_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_unicode_SOURCES = tst_unicode.c
tst_unicode_OBJECTS = tst_unicode.$(OBJEXT)
tst_unicode_LDADD = $(LDADD)
tst_unicode_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_utf8_SOURCES = tst_utf8.c
tst_utf8_OBJECTS = tst_utf8.$(OBJEXT)
tst_utf8_LDADD = $(LDADD)
tst_utf8_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_vlen_data_SOURCES = tst_vlen_data.c
tst_vlen_data_OBJECTS = tst_vlen_data.$(OBJEXT)
tst_vlen_data_LDADD = $(LDADD)
tst_vlen_data_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
tst_vlen_demo_SOURCES = tst_vlen_demo.c
tst_vlen_demo_OBJECTS = tst_vlen_demo.$(OBJEXT)
tst_vlen_demo_LDADD = $(LDADD)
tst_vlen_demo_DEPENDENCIES = ${top_builddir}/liblib/libnetcdf.la
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__maybe_remake_depfiles = depfiles
am__depfiles_remade = ./$(DEPDIR)/bom.Po ./$(DEPDIR)/chunkspec.Po \
	./$(DEPDIR)/dimmap.Po ./$(DEPDIR)/dumplib.Po \
	./$(DEPDIR)/indent.Po ./$(DEPDIR)/list.Po \
	./$(DEPDIR)/nc4print.Po ./$(DEPDIR)/nccopy.Po \
	./$(DEPDIR)/ncdump.Po ./$(DEPDIR)/nciter.Po \
	./$(DEPDIR)/nctime0.Po ./$(DEPDIR)/nctrunc.Po \
	./$(DEPDIR)/ncvalidator.Po ./$(DEPDIR)/ocprint.Po \
	./$(DEPDIR)/ref_ctest.Po ./$(DEPDIR)/ref_ctest64.Po \
	./$(DEPDIR)/rewrite-scalar.Po ./$(DEPDIR)/tst_chunking.Po \
	./$(DEPDIR)/tst_comp.Po ./$(DEPDIR)/tst_comp2.Po \
	./$(DEPDIR)/tst_compress.Po ./$(DEPDIR)/tst_create_files.Po \
	./$(DEPDIR)/tst_dimsizes.Po ./$(DEPDIR)/tst_enum_data.Po \
	./$(DEPDIR)/tst_fileinfo.Po ./$(DEPDIR)/tst_fillbug.Po \
	./$(DEPDIR)/tst_group_data.Po ./$(DEPDIR)/tst_h_rdc0.Po \
	./$(DEPDIR)/tst_h_scalar.Po ./$(DEPDIR)/tst_nans.Po \
	./$(DEPDIR)/tst_opaque_data.Po ./$(DEPDIR)/tst_special_atts.Po \
	./$(DEPDIR)/tst_string_data.Po ./$(DEPDIR)/tst_unicode.Po \
	./$(DEPDIR)/tst_utf8.Po ./$(DEPDIR)/tst_vlen_data.Po \
	./$(DEPDIR)/tst_vlen_demo.Po ./$(DEPDIR)/utils.Po \
	./$(DEPDIR)/vardata.Po
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo "  CC      " $@;
am__v_CC_1 = 
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo "  CCLD    " $@;
am__v_CCLD_1 = 
SOURCES = bom.c $(nc4print_SOURCES) $(nccopy_SOURCES) \
	$(ncdump_SOURCES) nctrunc.c $(ncvalidator_SOURCES) \
	$(ocprint_SOURCES) ref_ctest.c ref_ctest64.c rewrite-scalar.c \
	tst_chunking.c tst_comp.c tst_comp2.c tst_compress.c \
	tst_create_files.c tst_dimsizes.c tst_enum_data.c \
	tst_fileinfo.c tst_fillbug.c tst_group_data.c tst_h_rdc0.c \
	tst_h_scalar.c tst_nans.c tst_opaque_data.c tst_special_atts.c \
	tst_string_data.c tst_unicode.c tst_utf8.c tst_vlen_data.c \
	tst_vlen_demo.c
DIST_SOURCES = bom.c $(am__nc4print_SOURCES_DIST) $(nccopy_SOURCES) \
	$(ncdump_SOURCES) nctrunc.c $(ncvalidator_SOURCES) \
	$(am__ocprint_SOURCES_DIST) ref_ctest.c ref_ctest64.c \
	rewrite-scalar.c tst_chunking.c tst_comp.c tst_comp2.c \
	tst_compress.c tst_create_files.c tst_dimsizes.c \
	tst_enum_data.c tst_fileinfo.c tst_fillbug.c tst_group_data.c \
	tst_h_rdc0.c tst_h_scalar.c tst_nans.c tst_opaque_data.c \
	tst_special_atts.c tst_string_data.c tst_unicode.c tst_utf8.c \
	tst_vlen_data.c tst_vlen_demo.c
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(man_MANS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	check recheck distdir distdir-am
am__extra_recursive_targets = check-valgrind-recursive \
	check-valgrind-memcheck-recursive \
	check-valgrind-helgrind-recursive check-valgrind-drd-recursive \
	check-valgrind-sgcheck-recursive
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
am__tty_colors_dummy = \
  mgn= red= grn= lgn= blu= brg= std=; \
  am__color_tests=no
am__tty_colors = { \
  $(am__tty_colors_dummy); \
  if test "X$(AM_COLOR_TESTS)" = Xno; then \
    am__color_tests=no; \
  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
    am__color_tests=yes; \
  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
    am__color_tests=yes; \
  fi; \
  if test $$am__color_tests = yes; then \
    red=''; \
    grn=''; \
    lgn=''; \
    blu=''; \
    mgn=''; \
    brg=''; \
    std=''; \
  fi; \
}
am__recheck_rx = ^[ 	]*:recheck:[ 	]*
am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
# A command that, given a newline-separated list of test names on the
# standard input, print the name of the tests that are to be re-run
# upon "make recheck".
am__list_recheck_tests = $(AWK) '{ \
  recheck = 1; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
        { \
          if ((getline line2 < ($$0 ".log")) < 0) \
	    recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
        { \
          recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
        { \
          break; \
        } \
    }; \
  if (recheck) \
    print $$0; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# A command that, given a newline-separated list of test names on the
# standard input, create the global log from their .trs and .log files.
am__create_global_log = $(AWK) ' \
function fatal(msg) \
{ \
  print "fatal: making $@: " msg | "cat >&2"; \
  exit 1; \
} \
function rst_section(header) \
{ \
  print header; \
  len = length(header); \
  for (i = 1; i <= len; i = i + 1) \
    printf "="; \
  printf "\n\n"; \
} \
{ \
  copy_in_global_log = 1; \
  global_test_result = "RUN"; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
         fatal("failed to read from " $$0 ".trs"); \
      if (line ~ /$(am__global_test_result_rx)/) \
        { \
          sub("$(am__global_test_result_rx)", "", line); \
          sub("[ 	]*$$", "", line); \
          global_test_result = line; \
        } \
      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
        copy_in_global_log = 0; \
    }; \
  if (copy_in_global_log) \
    { \
      rst_section(global_test_result ": " $$0); \
      while ((rc = (getline line < ($$0 ".log"))) != 0) \
      { \
        if (rc < 0) \
          fatal("failed to read from " $$0 ".log"); \
        print line; \
      }; \
      printf "\n"; \
    }; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# Restructured Text title.
am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# Default flags passed to test drivers.
am__common_driver_flags = \
  --color-tests "$$am__color_tests" \
  --enable-hard-errors "$$am__enable_hard_errors" \
  --expect-failure "$$am__expect_failure"
# To be inserted before the command running the test.  Creates the
# directory for the log if needed.  Stores in $dir the directory
# containing $f, in $tst the test, in $log the log.  Executes the
# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
# will run the test scripts (or their associated LOG_COMPILER, if
# thy have one).
am__check_pre = \
$(am__sh_e_setup);					\
$(am__vpath_adj_setup) $(am__vpath_adj)			\
$(am__tty_colors);					\
srcdir=$(srcdir); export srcdir;			\
case "$@" in						\
  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
    *) am__odir=.;; 					\
esac;							\
test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
if test -f "./$$f"; then dir=./;			\
elif test -f "$$f"; then dir=;				\
else dir="$(srcdir)/"; fi;				\
tst=$$dir$$f; log='$@'; 				\
if test -n '$(DISABLE_HARD_ERRORS)'; then		\
  am__enable_hard_errors=no; 				\
else							\
  am__enable_hard_errors=yes; 				\
fi; 							\
case " $(XFAIL_TESTS) " in				\
  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
    am__expect_failure=yes;;				\
  *)							\
    am__expect_failure=no;;				\
esac; 							\
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
# A shell command to get the names of the tests scripts with any registered
# extension removed (i.e., equivalently, the names of the test logs, with
# the '.log' extension removed).  The result is saved in the shell variable
# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
# since that might cause problem with VPATH rewrites for suffix-less tests.
# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
am__set_TESTS_bases = \
  bases='$(TEST_LOGS)'; \
  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
  bases=`echo $$bases`
RECHECK_LOGS = $(TEST_LOGS)
TEST_SUITE_LOG = test-suite.log
LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__set_b = \
  case '$@' in \
    */*) \
      case '$*' in \
        */*) b='$*';; \
          *) b=`echo '$@' | sed 's/\.log$$//'`; \
       esac;; \
    *) \
      b='$*';; \
  esac
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.sh.log=.log)
SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp \
	$(top_srcdir)/lib_flags.am $(top_srcdir)/test-driver
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
AMTAR = @AMTAR@
AM_CFLAGS = @AM_CFLAGS@
AM_CPPFLAGS = -I$(top_srcdir)/include $(am__append_1)
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AM_LDFLAGS = 
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BINFILE_NAME = @BINFILE_NAME@
BUILD_INTERNAL_DOCS = @BUILD_INTERNAL_DOCS@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_VERSION = @CC_VERSION@
CFLAGS = @CFLAGS@
CONFIG_DATE = @CONFIG_DATE@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DOT = @DOT@
DOXYGEN = @DOXYGEN@
DOXYGEN_CSS_FILE = @DOXYGEN_CSS_FILE@
DOXYGEN_HEADER_FILE = @DOXYGEN_HEADER_FILE@
DOXYGEN_SEARCHENGINE = @DOXYGEN_SEARCHENGINE@
DOXYGEN_SERVER_BASED_SEARCH = @DOXYGEN_SERVER_BASED_SEARCH@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ENABLED_DOC_SECTIONS = @ENABLED_DOC_SECTIONS@
ENABLE_VALGRIND_drd = @ENABLE_VALGRIND_drd@
ENABLE_VALGRIND_helgrind = @ENABLE_VALGRIND_helgrind@
ENABLE_VALGRIND_memcheck = @ENABLE_VALGRIND_memcheck@
ENABLE_VALGRIND_sgcheck = @ENABLE_VALGRIND_sgcheck@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
HAS_BYTERANGE = @HAS_BYTERANGE@
HAS_CDF5 = @HAS_CDF5@
HAS_DAP = @HAS_DAP@
HAS_DAP2 = @HAS_DAP2@
HAS_DAP4 = @HAS_DAP4@
HAS_DISKLESS = @HAS_DISKLESS@
HAS_ERANGE_FILL = @HAS_ERANGE_FILL@
HAS_HDF4 = @HAS_HDF4@
HAS_HDF5 = @HAS_HDF5@
HAS_JNA = @HAS_JNA@
HAS_LOGGING = @HAS_LOGGING@
HAS_MMAP = @HAS_MMAP@
HAS_NC2 = @HAS_NC2@
HAS_NC4 = @HAS_NC4@
HAS_PARALLEL = @HAS_PARALLEL@
HAS_PARALLEL4 = @HAS_PARALLEL4@
HAS_PAR_FILTERS = @HAS_PAR_FILTERS@
HAS_PNETCDF = @HAS_PNETCDF@
HAS_SZLIB = @HAS_SZLIB@
HAS_SZLIB_WRITE = @HAS_SZLIB_WRITE@
HAVE_DOT = @HAVE_DOT@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
ISCMAKE = @ISCMAKE@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
M4FLAGS = @M4FLAGS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MPIEXEC = @MPIEXEC@
MSVC = @MSVC@
NC_DISPATCH_VERSION = @NC_DISPATCH_VERSION@
NC_ENABLE_DOXYGEN_PDF_OUTPUT = @NC_ENABLE_DOXYGEN_PDF_OUTPUT@
NC_HAS_BYTERANGE = @NC_HAS_BYTERANGE@
NC_HAS_CDF5 = @NC_HAS_CDF5@
NC_HAS_DAP2 = @NC_HAS_DAP2@
NC_HAS_DAP4 = @NC_HAS_DAP4@
NC_HAS_DISKLESS = @NC_HAS_DISKLESS@
NC_HAS_ERANGE_FILL = @NC_HAS_ERANGE_FILL@
NC_HAS_HDF4 = @NC_HAS_HDF4@
NC_HAS_HDF5 = @NC_HAS_HDF5@
NC_HAS_JNA = @NC_HAS_JNA@
NC_HAS_MMAP = @NC_HAS_MMAP@
NC_HAS_NC2 = @NC_HAS_NC2@
NC_HAS_NC4 = @NC_HAS_NC4@
NC_HAS_PARALLEL = @NC_HAS_PARALLEL@
NC_HAS_PARALLEL4 = @NC_HAS_PARALLEL4@
NC_HAS_PAR_FILTERS = @NC_HAS_PAR_FILTERS@
NC_HAS_PNETCDF = @NC_HAS_PNETCDF@
NC_HAS_SZIP = @NC_HAS_SZIP@
NC_LIBS = @NC_LIBS@
NC_M4 = @NC_M4@
NC_VERSION = @NC_VERSION@
NC_VERSION_MAJOR = @NC_VERSION_MAJOR@
NC_VERSION_MINOR = @NC_VERSION_MINOR@
NC_VERSION_NOTE = @NC_VERSION_NOTE@
NC_VERSION_PATCH = @NC_VERSION_PATCH@
NM = @NM@
NMEDIT = @NMEDIT@
NOUNDEFINED = @NOUNDEFINED@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
RELAX_COORD_BOUND = @RELAX_COORD_BOUND@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SHOW_DOXYGEN_TAG_LIST = @SHOW_DOXYGEN_TAG_LIST@
STRIP = @STRIP@
VALGRIND = @VALGRIND@
VALGRIND_ENABLED = @VALGRIND_ENABLED@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
enable_shared = @enable_shared@
enable_static = @enable_static@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
valgrind_enabled_tools = @valgrind_enabled_tools@
valgrind_tools = @valgrind_tools@
AM_TESTS_ENVIRONMENT = export TOPSRCDIR=${abs_top_srcdir}; export TOPBUILDDIR=${abs_top_builddir};

# Put together AM_CPPFLAGS and AM_LDFLAGS.
LDADD = ${top_builddir}/liblib/libnetcdf.la
# Note which tests depend on other tests. Necessary for make -j check.
TEST_EXTENSIONS = .sh
XFAIL_TESTS = "" $(am__append_4)
ncdump_SOURCES = ncdump.c vardata.c dumplib.c indent.c nctime0.c        \
ncdump.h vardata.h dumplib.h indent.h isnan.h nctime0.h cdl.h utils.h   \
utils.c nciter.h nciter.c nccomps.h

nccopy_SOURCES = nccopy.c nciter.c nciter.h chunkspec.h chunkspec.c     \
utils.h utils.c dimmap.h dimmap.c list.c list.h

ncvalidator_SOURCES = ncvalidator.c
@USE_HDF5_TRUE@nc4print_SOURCES = nc4print.c
@ENABLE_DAP_TRUE@ocprint_SOURCES = ocprint.c

# This is the man page.
man_MANS = ncdump.1 nccopy.1

# These files all have to be included with the distribution.

# The L512.bin file is file containing exactly 512 bytes each of value 0.
# It is used for creating hdf5 files with varying offsets for testing.
EXTRA_DIST = run_tests.sh tst_64bit.sh tst_output.sh test0.cdl \
	ref_ctest1_nc4.cdl ref_ctest1_nc4c.cdl ref_tst_solar_1.cdl \
	ref_tst_solar_2.cdl tst_netcdf4.sh tst_netcdf4_4.sh \
	ref_tst_small.cdl tst_lengths.sh tst_ncml.cdl ref1.ncml \
	ref_tst_group_data.cdl ref_tst_enum_data.cdl \
	ref_tst_opaque_data.cdl ref_tst_string_data.cdl \
	ref_tst_vlen_data.cdl ref_tst_comp.cdl ref_tst_unicode.cdl \
	ref_tst_nans.cdl small.cdl small2.cdl $(man_MANS) \
	run_utf8_tests.sh ref_tst_utf8.cdl ref_tst_fillbug.cdl \
	tst_fillbug.sh tst_calendars.cdl tst_calendars.sh \
	ref_times.cdl ref_tst_special_atts.cdl ref_tst_noncoord.cdl \
	ref_tst_compounds2.nc ref_tst_compounds2.cdl \
	ref_tst_compounds3.nc ref_tst_compounds3.cdl \
	ref_tst_compounds4.nc ref_tst_compounds4.cdl \
	ref_tst_group_data_v23.cdl tst_mslp.cdl tst_bug321.cdl \
	ref_tst_format_att.cdl ref_tst_format_att_64.cdl \
	tst_nccopy3.sh tst_nccopy4.sh tst_nccopy5.sh \
	ref_nc_test_netcdf4_4_0.nc run_back_comp_tests.sh \
	ref_nc_test_netcdf4.cdl ref_tst_special_atts3.cdl \
	tst_brecs.cdl ref_tst_grp_spec0.cdl ref_tst_grp_spec.cdl \
	tst_grp_spec.sh ref_tst_charfill.cdl tst_charfill.cdl \
	tst_charfill.sh tst_iter.sh tst_mud.sh ref_tst_mud4.cdl \
	ref_tst_mud4-bc.cdl ref_tst_mud4_chars.cdl inttags.cdl \
	inttags4.cdl ref_inttags.cdl ref_inttags4.cdl \
	ref_tst_ncf213.cdl tst_h_scalar.sh run_utf8_nc4_tests.sh \
	tst_formatx3.sh tst_formatx4.sh ref_tst_utf8_4.cdl \
	ref_tst_nc4_utf8_4.cdl tst_inttags.sh tst_inttags4.sh \
	CMakeLists.txt XGetopt.c tst_bom.sh tst_inmemory_nc3.sh \
	tst_dimsizes.sh tst_inmemory_nc4.sh tst_fileinfo.sh \
	run_ncgen_tests.sh ref_test_360_day_1900.nc \
	ref_test_365_day_1900.nc ref_test_366_day_1900.nc \
	ref_test_360_day_1900.cdl ref_test_365_day_1900.cdl \
	ref_test_366_day_1900.cdl tst_hdf5_offset.sh \
	run_ncgen_nc4_tests.sh tst_nccopy3_subset.sh \
	ref_nccopy3_subset.nc ref_test_corrupt_magic.nc \
	tst_ncgen_shared.sh tst_ncgen4.sh tst_ncgen4_classic.sh \
	tst_ncgen4_diff.sh tst_ncgen4_cycle.sh \
	tst_null_byte_padding.sh ref_null_byte_padding_test.nc \
	ref_tst_irish_rover.nc ref_provenance_v1.nc ref_tst_radix.cdl \
	tst_radix.cdl test_radix.sh ref_nccopy_w.cdl tst_nccopy_w3.sh \
	tst_nccopy_w4.sh ref_no_ncproperty.nc \
	test_unicode_directory.sh L512.bin tst_ctests.sh \
	ref_ctest_small_3.c ref_ctest_small_4.c \
	ref_ctest_special_atts_4.c

# CDL files and Expected results
SUBDIRS = cdl expected
CLEANFILES = tst_*.nc tmp*.nc test*.nc iter.* tmp*.cdl			\
tst_output_*.cdl tst_output_*.c tst_utf8_*.cdl *.tmp tst_tst8.cdl	\
tst_netcdf4_*.cdl test1_ncdump.cdl test2_ncdump.cdl test1.cdl		\
ctest1.cdl test1_cdf5.cdl test2_cdf5.cdl test1_offset.cdl		\
test2_offset.cdl ctest0.nc ctest0_64.nc c1.cdl c1_4.cdl ctest1_64.cdl	\
c0.nc c0_4.nc small.nc small2.nc c0tmp.nc c1.ncml utf8.cdl		\
utf8_64.cdl utf8.nc utf8_64.nc nc4_utf8.cdl nc4_utf8.nc			\
tst_unicode.cdl tst_group_data.cdl tst_compounds2.cdl tst_comp.cdl	\
tst_enum_data.cdl tst_small.cdl tst_times.cdl tst_solar_2.cdl		\
tst_string_data.cdl tst_fillbug.cdl tst_opaque_data.cdl			\
tst_compounds4.cdl tst_utf8.cdl tst_compounds3.cdl			\
tst_special_atts.cdl tst_nans.cdl tst_format_att_64.cdl			\
tst_vlen_data.cdl tst_solar_1.cdl tst_format_att.cdl			\
tst_nc_test_netcdf4_4_0.cdl tst_mud4.cdl tst_mud4-bc.cdl		\
tst_ncf213.cdl tst_h_scalar.cdl tst_mud4_chars.cdl inttags.nc		\
inttags4.nc tst_inttags.cdl tst_inttags4.cdl nc4_fileinfo.nc		\
hdf5_fileinfo.hdf nccopy3_subset_out.nc c5.nc				\
compound_datasize_test.nc compound_datasize_test2.nc ncf199.nc		\
tst_c0.cdl tst_c0_4.cdl tst_c0_4c.cdl tst_c0_64.cdl			\
tst_compound_datasize_test.cdl tst_compound_datasize_test2.cdl		\
tst_ncf199.cdl tst_tst_gattenum.cdl tst_tst_usuffix.cdl ctest.c		\
ctest64.c nccopy3_subset_out.nc camrun.c tst_ncf213.cdl tst_ncf213.nc   \
tst_radix.nc tmp_radix.cdl ctest_small_3.c ctest_small_4.c              \
ctest_special_atts_4.c

all: all-recursive

.SUFFIXES:
.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/lib_flags.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ncdump/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign ncdump/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
	esac;
$(top_srcdir)/lib_flags.am $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-binPROGRAMS: $(bin_PROGRAMS)
	@$(NORMAL_INSTALL)
	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
	fi; \
	for p in $$list; do echo "$$p $$p"; done | \
	sed 's/$(EXEEXT)$$//' | \
	while read p p1; do if test -f $$p \
	 || test -f $$p1 \
	  ; then echo "$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n;h' \
	    -e 's|.*|.|' \
	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
	sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
	    else { print "f", $$3 "/" $$4, $$1; } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	    test -z "$$files" || { \
	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	    } \
	; done

uninstall-binPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
	files=`for p in $$list; do echo "$$p"; done | \
	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
	      -e 's/$$/$(EXEEXT)/' \
	`; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(bindir)" && rm -f $$files

clean-binPROGRAMS:
	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list

clean-checkPROGRAMS:
	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list

clean-noinstPROGRAMS:
	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list

bom$(EXEEXT): $(bom_OBJECTS) $(bom_DEPENDENCIES) $(EXTRA_bom_DEPENDENCIES) 
	@rm -f bom$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(bom_OBJECTS) $(bom_LDADD) $(LIBS)

nc4print$(EXEEXT): $(nc4print_OBJECTS) $(nc4print_DEPENDENCIES) $(EXTRA_nc4print_DEPENDENCIES) 
	@rm -f nc4print$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(nc4print_OBJECTS) $(nc4print_LDADD) $(LIBS)

nccopy$(EXEEXT): $(nccopy_OBJECTS) $(nccopy_DEPENDENCIES) $(EXTRA_nccopy_DEPENDENCIES) 
	@rm -f nccopy$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(nccopy_OBJECTS) $(nccopy_LDADD) $(LIBS)

ncdump$(EXEEXT): $(ncdump_OBJECTS) $(ncdump_DEPENDENCIES) $(EXTRA_ncdump_DEPENDENCIES) 
	@rm -f ncdump$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(ncdump_OBJECTS) $(ncdump_LDADD) $(LIBS)

nctrunc$(EXEEXT): $(nctrunc_OBJECTS) $(nctrunc_DEPENDENCIES) $(EXTRA_nctrunc_DEPENDENCIES) 
	@rm -f nctrunc$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(nctrunc_OBJECTS) $(nctrunc_LDADD) $(LIBS)

ncvalidator$(EXEEXT): $(ncvalidator_OBJECTS) $(ncvalidator_DEPENDENCIES) $(EXTRA_ncvalidator_DEPENDENCIES) 
	@rm -f ncvalidator$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(ncvalidator_OBJECTS) $(ncvalidator_LDADD) $(LIBS)

ocprint$(EXEEXT): $(ocprint_OBJECTS) $(ocprint_DEPENDENCIES) $(EXTRA_ocprint_DEPENDENCIES) 
	@rm -f ocprint$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(ocprint_OBJECTS) $(ocprint_LDADD) $(LIBS)

ref_ctest$(EXEEXT): $(ref_ctest_OBJECTS) $(ref_ctest_DEPENDENCIES) $(EXTRA_ref_ctest_DEPENDENCIES) 
	@rm -f ref_ctest$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(ref_ctest_OBJECTS) $(ref_ctest_LDADD) $(LIBS)

ref_ctest64$(EXEEXT): $(ref_ctest64_OBJECTS) $(ref_ctest64_DEPENDENCIES) $(EXTRA_ref_ctest64_DEPENDENCIES) 
	@rm -f ref_ctest64$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(ref_ctest64_OBJECTS) $(ref_ctest64_LDADD) $(LIBS)

rewrite-scalar$(EXEEXT): $(rewrite_scalar_OBJECTS) $(rewrite_scalar_DEPENDENCIES) $(EXTRA_rewrite_scalar_DEPENDENCIES) 
	@rm -f rewrite-scalar$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(rewrite_scalar_OBJECTS) $(rewrite_scalar_LDADD) $(LIBS)

tst_chunking$(EXEEXT): $(tst_chunking_OBJECTS) $(tst_chunking_DEPENDENCIES) $(EXTRA_tst_chunking_DEPENDENCIES) 
	@rm -f tst_chunking$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_chunking_OBJECTS) $(tst_chunking_LDADD) $(LIBS)

tst_comp$(EXEEXT): $(tst_comp_OBJECTS) $(tst_comp_DEPENDENCIES) $(EXTRA_tst_comp_DEPENDENCIES) 
	@rm -f tst_comp$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_comp_OBJECTS) $(tst_comp_LDADD) $(LIBS)

tst_comp2$(EXEEXT): $(tst_comp2_OBJECTS) $(tst_comp2_DEPENDENCIES) $(EXTRA_tst_comp2_DEPENDENCIES) 
	@rm -f tst_comp2$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_comp2_OBJECTS) $(tst_comp2_LDADD) $(LIBS)

tst_compress$(EXEEXT): $(tst_compress_OBJECTS) $(tst_compress_DEPENDENCIES) $(EXTRA_tst_compress_DEPENDENCIES) 
	@rm -f tst_compress$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_compress_OBJECTS) $(tst_compress_LDADD) $(LIBS)

tst_create_files$(EXEEXT): $(tst_create_files_OBJECTS) $(tst_create_files_DEPENDENCIES) $(EXTRA_tst_create_files_DEPENDENCIES) 
	@rm -f tst_create_files$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_create_files_OBJECTS) $(tst_create_files_LDADD) $(LIBS)

tst_dimsizes$(EXEEXT): $(tst_dimsizes_OBJECTS) $(tst_dimsizes_DEPENDENCIES) $(EXTRA_tst_dimsizes_DEPENDENCIES) 
	@rm -f tst_dimsizes$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_dimsizes_OBJECTS) $(tst_dimsizes_LDADD) $(LIBS)

tst_enum_data$(EXEEXT): $(tst_enum_data_OBJECTS) $(tst_enum_data_DEPENDENCIES) $(EXTRA_tst_enum_data_DEPENDENCIES) 
	@rm -f tst_enum_data$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_enum_data_OBJECTS) $(tst_enum_data_LDADD) $(LIBS)

tst_fileinfo$(EXEEXT): $(tst_fileinfo_OBJECTS) $(tst_fileinfo_DEPENDENCIES) $(EXTRA_tst_fileinfo_DEPENDENCIES) 
	@rm -f tst_fileinfo$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_fileinfo_OBJECTS) $(tst_fileinfo_LDADD) $(LIBS)

tst_fillbug$(EXEEXT): $(tst_fillbug_OBJECTS) $(tst_fillbug_DEPENDENCIES) $(EXTRA_tst_fillbug_DEPENDENCIES) 
	@rm -f tst_fillbug$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_fillbug_OBJECTS) $(tst_fillbug_LDADD) $(LIBS)

tst_group_data$(EXEEXT): $(tst_group_data_OBJECTS) $(tst_group_data_DEPENDENCIES) $(EXTRA_tst_group_data_DEPENDENCIES) 
	@rm -f tst_group_data$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_group_data_OBJECTS) $(tst_group_data_LDADD) $(LIBS)

tst_h_rdc0$(EXEEXT): $(tst_h_rdc0_OBJECTS) $(tst_h_rdc0_DEPENDENCIES) $(EXTRA_tst_h_rdc0_DEPENDENCIES) 
	@rm -f tst_h_rdc0$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_h_rdc0_OBJECTS) $(tst_h_rdc0_LDADD) $(LIBS)

tst_h_scalar$(EXEEXT): $(tst_h_scalar_OBJECTS) $(tst_h_scalar_DEPENDENCIES) $(EXTRA_tst_h_scalar_DEPENDENCIES) 
	@rm -f tst_h_scalar$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_h_scalar_OBJECTS) $(tst_h_scalar_LDADD) $(LIBS)

tst_nans$(EXEEXT): $(tst_nans_OBJECTS) $(tst_nans_DEPENDENCIES) $(EXTRA_tst_nans_DEPENDENCIES) 
	@rm -f tst_nans$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_nans_OBJECTS) $(tst_nans_LDADD) $(LIBS)

tst_opaque_data$(EXEEXT): $(tst_opaque_data_OBJECTS) $(tst_opaque_data_DEPENDENCIES) $(EXTRA_tst_opaque_data_DEPENDENCIES) 
	@rm -f tst_opaque_data$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_opaque_data_OBJECTS) $(tst_opaque_data_LDADD) $(LIBS)

tst_special_atts$(EXEEXT): $(tst_special_atts_OBJECTS) $(tst_special_atts_DEPENDENCIES) $(EXTRA_tst_special_atts_DEPENDENCIES) 
	@rm -f tst_special_atts$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_special_atts_OBJECTS) $(tst_special_atts_LDADD) $(LIBS)

tst_string_data$(EXEEXT): $(tst_string_data_OBJECTS) $(tst_string_data_DEPENDENCIES) $(EXTRA_tst_string_data_DEPENDENCIES) 
	@rm -f tst_string_data$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_string_data_OBJECTS) $(tst_string_data_LDADD) $(LIBS)

tst_unicode$(EXEEXT): $(tst_unicode_OBJECTS) $(tst_unicode_DEPENDENCIES) $(EXTRA_tst_unicode_DEPENDENCIES) 
	@rm -f tst_unicode$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_unicode_OBJECTS) $(tst_unicode_LDADD) $(LIBS)

tst_utf8$(EXEEXT): $(tst_utf8_OBJECTS) $(tst_utf8_DEPENDENCIES) $(EXTRA_tst_utf8_DEPENDENCIES) 
	@rm -f tst_utf8$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_utf8_OBJECTS) $(tst_utf8_LDADD) $(LIBS)

tst_vlen_data$(EXEEXT): $(tst_vlen_data_OBJECTS) $(tst_vlen_data_DEPENDENCIES) $(EXTRA_tst_vlen_data_DEPENDENCIES) 
	@rm -f tst_vlen_data$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_vlen_data_OBJECTS) $(tst_vlen_data_LDADD) $(LIBS)

tst_vlen_demo$(EXEEXT): $(tst_vlen_demo_OBJECTS) $(tst_vlen_demo_DEPENDENCIES) $(EXTRA_tst_vlen_demo_DEPENDENCIES) 
	@rm -f tst_vlen_demo$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tst_vlen_demo_OBJECTS) $(tst_vlen_demo_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bom.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/chunkspec.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dimmap.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dumplib.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/indent.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/list.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nc4print.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nccopy.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ncdump.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nciter.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nctime0.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nctrunc.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ncvalidator.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ocprint.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ref_ctest.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ref_ctest64.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rewrite-scalar.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_chunking.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_comp.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_comp2.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_compress.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_create_files.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_dimsizes.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_enum_data.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_fileinfo.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_fillbug.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_group_data.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_h_rdc0.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_h_scalar.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_nans.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_opaque_data.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_special_atts.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_string_data.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_unicode.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_utf8.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_vlen_data.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst_vlen_demo.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vardata.Po@am__quote@ # am--include-marker

$(am__depfiles_remade):
	@$(MKDIR_P) $(@D)
	@echo '# dummy' >$@-t && $(am__mv) $@-t $@

am--depfiles: $(am__depfiles_remade)

.c.o:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<

.c.obj:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-man1: $(man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(man_MANS)'; \
	test -n "$(man1dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.1[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"
check-valgrind-local: 
check-valgrind-memcheck-local: 
check-valgrind-helgrind-local: 
check-valgrind-drd-local: 
check-valgrind-sgcheck-local: 

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

# Recover from deleted '.trs' file; this should ensure that
# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
# to avoid problems with "make -n".
.log.trs:
	rm -f $< $@
	$(MAKE) $(AM_MAKEFLAGS) $<

# Leading 'am--fnord' is there to ensure the list of targets does not
# expand to empty, as could happen e.g. with make check TESTS=''.
am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
am--force-recheck:
	@:

$(TEST_SUITE_LOG): $(TEST_LOGS)
	@$(am__set_TESTS_bases); \
	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
	redo_bases=`for i in $$bases; do \
	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
	            done`; \
	if test -n "$$redo_bases"; then \
	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
	  if $(am__make_dryrun); then :; else \
	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
	  fi; \
	fi; \
	if test -n "$$am__remaking_logs"; then \
	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
	       "recursion detected" >&2; \
	elif test -n "$$redo_logs"; then \
	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
	fi; \
	if $(am__make_dryrun); then :; else \
	  st=0;  \
	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
	  for i in $$redo_bases; do \
	    test -f $$i.trs && test -r $$i.trs \
	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
	    test -f $$i.log && test -r $$i.log \
	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
	  done; \
	  test $$st -eq 0 || exit 1; \
	fi
	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
	ws='[ 	]'; \
	results=`for b in $$bases; do echo $$b.trs; done`; \
	test -n "$$results" || results=/dev/null; \
	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
	  success=true; \
	else \
	  success=false; \
	fi; \
	br='==================='; br=$$br$$br$$br$$br; \
	result_count () \
	{ \
	    if test x"$$1" = x"--maybe-color"; then \
	      maybe_colorize=yes; \
	    elif test x"$$1" = x"--no-color"; then \
	      maybe_colorize=no; \
	    else \
	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
	    fi; \
	    shift; \
	    desc=$$1 count=$$2; \
	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
	      color_start=$$3 color_end=$$std; \
	    else \
	      color_start= color_end=; \
	    fi; \
	    echo "$${color_start}# $$desc $$count$${color_end}"; \
	}; \
	create_testsuite_report () \
	{ \
	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
	  result_count $$1 "PASS: " $$pass  "$$grn"; \
	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
	  result_count $$1 "FAIL: " $$fail  "$$red"; \
	  result_count $$1 "XPASS:" $$xpass "$$red"; \
	  result_count $$1 "ERROR:" $$error "$$mgn"; \
	}; \
	{								\
	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
	    $(am__rst_title);						\
	  create_testsuite_report --no-color;				\
	  echo;								\
	  echo ".. contents:: :depth: 2";				\
	  echo;								\
	  for b in $$bases; do echo $$b; done				\
	    | $(am__create_global_log);					\
	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
	if $$success; then						\
	  col="$$grn";							\
	 else								\
	  col="$$red";							\
	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
	fi;								\
	echo "$${col}$$br$${std}"; 					\
	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
	echo "$${col}$$br$${std}"; 					\
	create_testsuite_report --maybe-color;				\
	echo "$$col$$br$$std";						\
	if $$success; then :; else					\
	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
	  fi;								\
	  echo "$$col$$br$$std";					\
	fi;								\
	$$success || exit 1

check-TESTS: $(check_PROGRAMS)
	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	trs_list=`for i in $$bases; do echo $$i.trs; done`; \
	log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
	exit $$?;
recheck: all $(check_PROGRAMS)
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	bases=`for i in $$bases; do echo $$i; done \
	         | $(am__list_recheck_tests)` || exit 1; \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	log_list=`echo $$log_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
	        am__force_recheck=am--force-recheck \
	        TEST_LOGS="$$log_list"; \
	exit $$?
ref_ctest.log: ref_ctest$(EXEEXT)
	@p='ref_ctest$(EXEEXT)'; \
	b='ref_ctest'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
ref_ctest64.log: ref_ctest64$(EXEEXT)
	@p='ref_ctest64$(EXEEXT)'; \
	b='ref_ctest64'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
.sh.log:
	@p='$<'; \
	$(am__set_b); \
	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
@am__EXEEXT_TRUE@	@p='$<'; \
@am__EXEEXT_TRUE@	$(am__set_b); \
@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)

distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-recursive
all-am: Makefile $(PROGRAMS) $(MANS)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:
	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
check-valgrind: check-valgrind-recursive

check-valgrind-am: check-valgrind-local

check-valgrind-drd: check-valgrind-drd-recursive

check-valgrind-drd-am: check-valgrind-drd-local

check-valgrind-helgrind: check-valgrind-helgrind-recursive

check-valgrind-helgrind-am: check-valgrind-helgrind-local

check-valgrind-memcheck: check-valgrind-memcheck-recursive

check-valgrind-memcheck-am: check-valgrind-memcheck-local

check-valgrind-sgcheck: check-valgrind-sgcheck-recursive

check-valgrind-sgcheck-am: check-valgrind-sgcheck-local

clean: clean-recursive

clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
	clean-libtool clean-noinstPROGRAMS mostlyclean-am

distclean: distclean-recursive
		-rm -f ./$(DEPDIR)/bom.Po
	-rm -f ./$(DEPDIR)/chunkspec.Po
	-rm -f ./$(DEPDIR)/dimmap.Po
	-rm -f ./$(DEPDIR)/dumplib.Po
	-rm -f ./$(DEPDIR)/indent.Po
	-rm -f ./$(DEPDIR)/list.Po
	-rm -f ./$(DEPDIR)/nc4print.Po
	-rm -f ./$(DEPDIR)/nccopy.Po
	-rm -f ./$(DEPDIR)/ncdump.Po
	-rm -f ./$(DEPDIR)/nciter.Po
	-rm -f ./$(DEPDIR)/nctime0.Po
	-rm -f ./$(DEPDIR)/nctrunc.Po
	-rm -f ./$(DEPDIR)/ncvalidator.Po
	-rm -f ./$(DEPDIR)/ocprint.Po
	-rm -f ./$(DEPDIR)/ref_ctest.Po
	-rm -f ./$(DEPDIR)/ref_ctest64.Po
	-rm -f ./$(DEPDIR)/rewrite-scalar.Po
	-rm -f ./$(DEPDIR)/tst_chunking.Po
	-rm -f ./$(DEPDIR)/tst_comp.Po
	-rm -f ./$(DEPDIR)/tst_comp2.Po
	-rm -f ./$(DEPDIR)/tst_compress.Po
	-rm -f ./$(DEPDIR)/tst_create_files.Po
	-rm -f ./$(DEPDIR)/tst_dimsizes.Po
	-rm -f ./$(DEPDIR)/tst_enum_data.Po
	-rm -f ./$(DEPDIR)/tst_fileinfo.Po
	-rm -f ./$(DEPDIR)/tst_fillbug.Po
	-rm -f ./$(DEPDIR)/tst_group_data.Po
	-rm -f ./$(DEPDIR)/tst_h_rdc0.Po
	-rm -f ./$(DEPDIR)/tst_h_scalar.Po
	-rm -f ./$(DEPDIR)/tst_nans.Po
	-rm -f ./$(DEPDIR)/tst_opaque_data.Po
	-rm -f ./$(DEPDIR)/tst_special_atts.Po
	-rm -f ./$(DEPDIR)/tst_string_data.Po
	-rm -f ./$(DEPDIR)/tst_unicode.Po
	-rm -f ./$(DEPDIR)/tst_utf8.Po
	-rm -f ./$(DEPDIR)/tst_vlen_data.Po
	-rm -f ./$(DEPDIR)/tst_vlen_demo.Po
	-rm -f ./$(DEPDIR)/utils.Po
	-rm -f ./$(DEPDIR)/vardata.Po
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-man

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-binPROGRAMS

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man: install-man1

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
		-rm -f ./$(DEPDIR)/bom.Po
	-rm -f ./$(DEPDIR)/chunkspec.Po
	-rm -f ./$(DEPDIR)/dimmap.Po
	-rm -f ./$(DEPDIR)/dumplib.Po
	-rm -f ./$(DEPDIR)/indent.Po
	-rm -f ./$(DEPDIR)/list.Po
	-rm -f ./$(DEPDIR)/nc4print.Po
	-rm -f ./$(DEPDIR)/nccopy.Po
	-rm -f ./$(DEPDIR)/ncdump.Po
	-rm -f ./$(DEPDIR)/nciter.Po
	-rm -f ./$(DEPDIR)/nctime0.Po
	-rm -f ./$(DEPDIR)/nctrunc.Po
	-rm -f ./$(DEPDIR)/ncvalidator.Po
	-rm -f ./$(DEPDIR)/ocprint.Po
	-rm -f ./$(DEPDIR)/ref_ctest.Po
	-rm -f ./$(DEPDIR)/ref_ctest64.Po
	-rm -f ./$(DEPDIR)/rewrite-scalar.Po
	-rm -f ./$(DEPDIR)/tst_chunking.Po
	-rm -f ./$(DEPDIR)/tst_comp.Po
	-rm -f ./$(DEPDIR)/tst_comp2.Po
	-rm -f ./$(DEPDIR)/tst_compress.Po
	-rm -f ./$(DEPDIR)/tst_create_files.Po
	-rm -f ./$(DEPDIR)/tst_dimsizes.Po
	-rm -f ./$(DEPDIR)/tst_enum_data.Po
	-rm -f ./$(DEPDIR)/tst_fileinfo.Po
	-rm -f ./$(DEPDIR)/tst_fillbug.Po
	-rm -f ./$(DEPDIR)/tst_group_data.Po
	-rm -f ./$(DEPDIR)/tst_h_rdc0.Po
	-rm -f ./$(DEPDIR)/tst_h_scalar.Po
	-rm -f ./$(DEPDIR)/tst_nans.Po
	-rm -f ./$(DEPDIR)/tst_opaque_data.Po
	-rm -f ./$(DEPDIR)/tst_special_atts.Po
	-rm -f ./$(DEPDIR)/tst_string_data.Po
	-rm -f ./$(DEPDIR)/tst_unicode.Po
	-rm -f ./$(DEPDIR)/tst_utf8.Po
	-rm -f ./$(DEPDIR)/tst_vlen_data.Po
	-rm -f ./$(DEPDIR)/tst_vlen_demo.Po
	-rm -f ./$(DEPDIR)/utils.Po
	-rm -f ./$(DEPDIR)/vardata.Po
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-binPROGRAMS uninstall-man

uninstall-man: uninstall-man1

.MAKE: $(am__recursive_targets) check-am install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
	am--depfiles check check-TESTS check-am check-valgrind-am \
	check-valgrind-drd-am check-valgrind-drd-local \
	check-valgrind-helgrind-am check-valgrind-helgrind-local \
	check-valgrind-local check-valgrind-memcheck-am \
	check-valgrind-memcheck-local check-valgrind-sgcheck-am \
	check-valgrind-sgcheck-local clean clean-binPROGRAMS \
	clean-checkPROGRAMS clean-generic clean-libtool \
	clean-noinstPROGRAMS cscopelist-am ctags ctags-am distclean \
	distclean-compile distclean-generic distclean-libtool \
	distclean-tags distdir dvi dvi-am html html-am info info-am \
	install install-am install-binPROGRAMS install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-man1 install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
	pdf pdf-am ps ps-am recheck tags tags-am uninstall \
	uninstall-am uninstall-binPROGRAMS uninstall-man \
	uninstall-man1

.PRECIOUS: Makefile


# The tst_nccopy3.sh test uses output from a bunch of other
# tests. This records the dependency so parallel builds work.
@BUILD_TESTSETS_TRUE@tst_nccopy3.log: tst_calendars.log run_utf8_tests.log tst_output.log	\
@BUILD_TESTSETS_TRUE@tst_64bit.log run_tests.log tst_lengths.log

# Record interscript dependencies so parallel builds work.
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@tst_nccopy4.log: run_ncgen_tests.log tst_output.log tst_ncgen4.log	\
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@tst_fillbug.log tst_netcdf4_4.log tst_h_scalar.log
@BUILD_TESTSETS_TRUE@@USE_HDF5_TRUE@tst_nccopy5.log: tst_nccopy4.log

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: