# Makefile.in generated by automake 1.16.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2018 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
@OPENCONNECT_OPENSSL_TRUE@am__append_1 = $(OSSL_KEYS)
@TEST_DSA_TRUE@am__append_2 = $(DSA_KEYS)
@HAVE_NETNS_TRUE@am__append_3 = dtls-psk sigterm
@HAVE_CWRAP_TRUE@am__append_4 = auth-username-pass auth-certificate auth-nonascii cert-fingerprint id-test
@HAVE_CWRAP_TRUE@@TEST_PKCS11_TRUE@am__append_5 = auth-pkcs11

# We fail test2 because PKCS11_enumerate_certs() still doesn't seem to return
# the certs after we log in. Perhaps it's cached the results?
@HAVE_CWRAP_TRUE@@OPENCONNECT_GNUTLS_TRUE@@TEST_PKCS11_TRUE@am__append_6 = openconnect-test2
# GnuTLS build fails this one: https://gitlab.com/gnutls/gnutls/-/issues/977
@HAVE_CWRAP_TRUE@@OPENCONNECT_OPENSSL_TRUE@@TEST_PKCS11_TRUE@am__append_7 = openconnect-test3
@OPENCONNECT_WIN32_TRUE@am__append_8 = list-taps
@CHECK_DTLS_TRUE@am__append_9 = bad_dtls_test
@CHECK_DTLS_TRUE@@DTLS_XFAIL_TRUE@XFAIL_TESTS =  \
@CHECK_DTLS_TRUE@@DTLS_XFAIL_TRUE@	bad_dtls_test$(EXEEXT)
TESTS = $(dist_check_SCRIPTS) $(am__EXEEXT_3)
noinst_PROGRAMS = $(am__EXEEXT_3) serverhash$(EXEEXT)
subdir = tests
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_vscript.m4 \
	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__dist_check_SCRIPTS_DIST) \
	$(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES = softhsm2.conf
CONFIG_CLEAN_VPATH_FILES =
@OPENCONNECT_WIN32_TRUE@am__EXEEXT_1 = list-taps$(EXEEXT)
@CHECK_DTLS_TRUE@am__EXEEXT_2 = bad_dtls_test$(EXEEXT)
am__EXEEXT_3 = lzstest$(EXEEXT) seqtest$(EXEEXT) $(am__EXEEXT_1) \
	$(am__EXEEXT_2)
PROGRAMS = $(noinst_PROGRAMS)
am__bad_dtls_test_SOURCES_DIST = bad_dtls_test.c
@CHECK_DTLS_TRUE@am_bad_dtls_test_OBJECTS =  \
@CHECK_DTLS_TRUE@	bad_dtls_test-bad_dtls_test.$(OBJEXT)
bad_dtls_test_OBJECTS = $(am_bad_dtls_test_OBJECTS)
am__DEPENDENCIES_1 =
@CHECK_DTLS_TRUE@bad_dtls_test_DEPENDENCIES = $(am__DEPENDENCIES_1)
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 = 
bad_dtls_test_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(bad_dtls_test_CFLAGS) \
	$(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
list_taps_SOURCES = list-taps.c
list_taps_OBJECTS = list-taps.$(OBJEXT)
list_taps_LDADD = $(LDADD)
lzstest_SOURCES = lzstest.c
lzstest_OBJECTS = lzstest.$(OBJEXT)
lzstest_LDADD = $(LDADD)
seqtest_SOURCES = seqtest.c
seqtest_OBJECTS = seqtest.$(OBJEXT)
seqtest_LDADD = $(LDADD)
am_serverhash_OBJECTS = serverhash.$(OBJEXT)
serverhash_OBJECTS = $(am_serverhash_OBJECTS)
serverhash_DEPENDENCIES = ../libopenconnect.la $(am__DEPENDENCIES_1)
am__dist_check_SCRIPTS_DIST = autocompletion dtls-psk sigterm \
	auth-username-pass auth-certificate auth-nonascii \
	cert-fingerprint id-test auth-pkcs11
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__maybe_remake_depfiles = depfiles
am__depfiles_remade = ./$(DEPDIR)/bad_dtls_test-bad_dtls_test.Po \
	./$(DEPDIR)/list-taps.Po ./$(DEPDIR)/lzstest.Po \
	./$(DEPDIR)/seqtest.Po ./$(DEPDIR)/serverhash.Po
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo "  CC      " $@;
am__v_CC_1 = 
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo "  CCLD    " $@;
am__v_CCLD_1 = 
SOURCES = $(bad_dtls_test_SOURCES) list-taps.c lzstest.c seqtest.c \
	$(serverhash_SOURCES)
DIST_SOURCES = $(am__bad_dtls_test_SOURCES_DIST) list-taps.c lzstest.c \
	seqtest.c $(serverhash_SOURCES)
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
am__tty_colors_dummy = \
  mgn= red= grn= lgn= blu= brg= std=; \
  am__color_tests=no
am__tty_colors = { \
  $(am__tty_colors_dummy); \
  if test "X$(AM_COLOR_TESTS)" = Xno; then \
    am__color_tests=no; \
  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
    am__color_tests=yes; \
  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
    am__color_tests=yes; \
  fi; \
  if test $$am__color_tests = yes; then \
    red=''; \
    grn=''; \
    lgn=''; \
    blu=''; \
    mgn=''; \
    brg=''; \
    std=''; \
  fi; \
}
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__recheck_rx = ^[ 	]*:recheck:[ 	]*
am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
# A command that, given a newline-separated list of test names on the
# standard input, print the name of the tests that are to be re-run
# upon "make recheck".
am__list_recheck_tests = $(AWK) '{ \
  recheck = 1; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
        { \
          if ((getline line2 < ($$0 ".log")) < 0) \
	    recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
        { \
          recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
        { \
          break; \
        } \
    }; \
  if (recheck) \
    print $$0; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# A command that, given a newline-separated list of test names on the
# standard input, create the global log from their .trs and .log files.
am__create_global_log = $(AWK) ' \
function fatal(msg) \
{ \
  print "fatal: making $@: " msg | "cat >&2"; \
  exit 1; \
} \
function rst_section(header) \
{ \
  print header; \
  len = length(header); \
  for (i = 1; i <= len; i = i + 1) \
    printf "="; \
  printf "\n\n"; \
} \
{ \
  copy_in_global_log = 1; \
  global_test_result = "RUN"; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
         fatal("failed to read from " $$0 ".trs"); \
      if (line ~ /$(am__global_test_result_rx)/) \
        { \
          sub("$(am__global_test_result_rx)", "", line); \
          sub("[ 	]*$$", "", line); \
          global_test_result = line; \
        } \
      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
        copy_in_global_log = 0; \
    }; \
  if (copy_in_global_log) \
    { \
      rst_section(global_test_result ": " $$0); \
      while ((rc = (getline line < ($$0 ".log"))) != 0) \
      { \
        if (rc < 0) \
          fatal("failed to read from " $$0 ".log"); \
        print line; \
      }; \
      printf "\n"; \
    }; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# Restructured Text title.
am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# Default flags passed to test drivers.
am__common_driver_flags = \
  --color-tests "$$am__color_tests" \
  --enable-hard-errors "$$am__enable_hard_errors" \
  --expect-failure "$$am__expect_failure"
# To be inserted before the command running the test.  Creates the
# directory for the log if needed.  Stores in $dir the directory
# containing $f, in $tst the test, in $log the log.  Executes the
# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
# will run the test scripts (or their associated LOG_COMPILER, if
# thy have one).
am__check_pre = \
$(am__sh_e_setup);					\
$(am__vpath_adj_setup) $(am__vpath_adj)			\
$(am__tty_colors);					\
srcdir=$(srcdir); export srcdir;			\
case "$@" in						\
  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
    *) am__odir=.;; 					\
esac;							\
test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
if test -f "./$$f"; then dir=./;			\
elif test -f "$$f"; then dir=;				\
else dir="$(srcdir)/"; fi;				\
tst=$$dir$$f; log='$@'; 				\
if test -n '$(DISABLE_HARD_ERRORS)'; then		\
  am__enable_hard_errors=no; 				\
else							\
  am__enable_hard_errors=yes; 				\
fi; 							\
case " $(XFAIL_TESTS) " in				\
  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
    am__expect_failure=yes;;				\
  *)							\
    am__expect_failure=no;;				\
esac; 							\
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
# A shell command to get the names of the tests scripts with any registered
# extension removed (i.e., equivalently, the names of the test logs, with
# the '.log' extension removed).  The result is saved in the shell variable
# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
# since that might cause problem with VPATH rewrites for suffix-less tests.
# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
am__set_TESTS_bases = \
  bases='$(TEST_LOGS)'; \
  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
  bases=`echo $$bases`
RECHECK_LOGS = $(TEST_LOGS)
AM_RECURSIVE_TARGETS = check recheck
TEST_SUITE_LOG = test-suite.log
TEST_EXTENSIONS = @EXEEXT@ .test
LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__set_b = \
  case '$@' in \
    */*) \
      case '$*' in \
        */*) b='$*';; \
          *) b=`echo '$@' | sed 's/\.log$$//'`; \
       esac;; \
    *) \
      b='$*';; \
  esac
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.test.log=.log)
TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
	$(TEST_LOG_FLAGS)
am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/softhsm2.conf.in \
	$(top_srcdir)/depcomp $(top_srcdir)/test-driver
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
APIMAJOR = @APIMAJOR@
APIMINOR = @APIMINOR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CONFIG_STATUS_DEPENDENCIES = @CONFIG_STATUS_DEPENDENCIES@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CWRAP_CFLAGS = @CWRAP_CFLAGS@
CWRAP_LIBS = @CWRAP_LIBS@
CYGPATH_W = @CYGPATH_W@
DEFAULT_VPNCSCRIPT = @DEFAULT_VPNCSCRIPT@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GITVERSIONDEPS = @GITVERSIONDEPS@
GNUTLS_CFLAGS = @GNUTLS_CFLAGS@
GNUTLS_LIBS = @GNUTLS_LIBS@
GREP = @GREP@
GROFF = @GROFF@
GSSAPI_CFLAGS = @GSSAPI_CFLAGS@
GSSAPI_LIBS = @GSSAPI_LIBS@
ICONV_CFLAGS = @ICONV_CFLAGS@
ICONV_LIBS = @ICONV_LIBS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTL_CFLAGS = @INTL_CFLAGS@
INTL_LIBS = @INTL_LIBS@
IP = @IP@
JNI_CFLAGS = @JNI_CFLAGS@
KRB5_CONFIG = @KRB5_CONFIG@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBLZ4_CFLAGS = @LIBLZ4_CFLAGS@
LIBLZ4_LIBS = @LIBLZ4_LIBS@
LIBLZ4_PC = @LIBLZ4_PC@
LIBOBJS = @LIBOBJS@
LIBP11_CFLAGS = @LIBP11_CFLAGS@
LIBP11_LIBS = @LIBP11_LIBS@
LIBPCSCLITE_CFLAGS = @LIBPCSCLITE_CFLAGS@
LIBPCSCLITE_LIBS = @LIBPCSCLITE_LIBS@
LIBPCSCLITE_PC = @LIBPCSCLITE_PC@
LIBPROXY_CFLAGS = @LIBPROXY_CFLAGS@
LIBPROXY_LIBS = @LIBPROXY_LIBS@
LIBPROXY_PC = @LIBPROXY_PC@
LIBPSKC_CFLAGS = @LIBPSKC_CFLAGS@
LIBPSKC_LIBS = @LIBPSKC_LIBS@
LIBPSKC_PC = @LIBPSKC_PC@
LIBS = @LIBS@
LIBSTOKEN_CFLAGS = @LIBSTOKEN_CFLAGS@
LIBSTOKEN_LIBS = @LIBSTOKEN_LIBS@
LIBSTOKEN_PC = @LIBSTOKEN_PC@
LIBTOOL = @LIBTOOL@
LIBXML2_CFLAGS = @LIBXML2_CFLAGS@
LIBXML2_LIBS = @LIBXML2_LIBS@
LINGUAS = @LINGUAS@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
NM = @NM@
NMEDIT = @NMEDIT@
NUTTCP = @NUTTCP@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OCSERV_GROUP = @OCSERV_GROUP@
OCSERV_USER = @OCSERV_USER@
OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
OPENSSL_LIBS = @OPENSSL_LIBS@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
P11KIT_CFLAGS = @P11KIT_CFLAGS@
P11KIT_LIBS = @P11KIT_LIBS@
P11KIT_PC = @P11KIT_PC@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PYTHON = @PYTHON@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SSL_CFLAGS = @SSL_CFLAGS@
SSL_LIBS = @SSL_LIBS@
SSL_PC = @SSL_PC@
STRIP = @STRIP@
SYMVER_ASPRINTF = @SYMVER_ASPRINTF@
SYMVER_GETLINE = @SYMVER_GETLINE@
SYMVER_JAVA = @SYMVER_JAVA@
SYMVER_TIME = @SYMVER_TIME@
SYMVER_VASPRINTF = @SYMVER_VASPRINTF@
SYMVER_WIN32_STRERROR = @SYMVER_WIN32_STRERROR@
TASN1_CFLAGS = @TASN1_CFLAGS@
TASN1_LIBS = @TASN1_LIBS@
TPM2_CFLAGS = @TPM2_CFLAGS@
TPM2_LIBS = @TPM2_LIBS@
TSS2_ESYS_CFLAGS = @TSS2_ESYS_CFLAGS@
TSS2_ESYS_LIBS = @TSS2_ESYS_LIBS@
TSS2_LIBS = @TSS2_LIBS@
TSS_CFLAGS = @TSS_CFLAGS@
TSS_LIBS = @TSS_LIBS@
VERSION = @VERSION@
VSCRIPT_LDFLAGS = @VSCRIPT_LDFLAGS@
WFLAGS = @WFLAGS@
WINDRES = @WINDRES@
ZLIB_CFLAGS = @ZLIB_CFLAGS@
ZLIB_LIBS = @ZLIB_LIBS@
ZLIB_PC = @ZLIB_PC@
_ACJNI_JAVAC = @_ACJNI_JAVAC@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
openssl_pc_libs = @openssl_pc_libs@
pdfdir = @pdfdir@
pkgconfigdir = @pkgconfigdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
system_pcsc_libs = @system_pcsc_libs@
target_alias = @target_alias@
test_pkcs11 = @test_pkcs11@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
certsdir = $(srcdir)/certs
USER_KEYS = $(certsdir)/user-key-pkcs1.pem \
	$(certsdir)/user-key-pkcs1.der \
	$(certsdir)/user-key-pkcs1-aes128.pem \
	$(certsdir)/user-key-pkcs8.pem $(certsdir)/user-key-pkcs8.der \
	$(certsdir)/user-key-pkcs8-pbes1-sha1-3des.pem \
	$(certsdir)/user-key-pkcs8-pbes1-sha1-3des.der \
	$(certsdir)/user-key-pkcs8-pbes2-sha1.pem \
	$(certsdir)/user-key-pkcs8-pbes2-sha1.der \
	$(certsdir)/user-key-sha1-3des-sha1.p12 \
	$(certsdir)/user-key-sha1-3des-sha256.p12 \
	$(certsdir)/user-key-aes256-cbc-sha256.p12 $(am__append_1) \
	$(am__append_2) $(certsdir)/ec-key-pkcs1.pem \
	$(certsdir)/ec-key-pkcs1.der \
	$(certsdir)/ec-key-pkcs1-aes128.pem \
	$(certsdir)/ec-key-pkcs8.pem $(certsdir)/ec-key-pkcs8.der \
	$(certsdir)/ec-key-pkcs8-pbes2-sha1.pem \
	$(certsdir)/ec-key-pkcs8-pbes2-sha1.der \
	$(certsdir)/ec-key-aes256-cbc-sha256.p12

# We know GnuTLS doesn't support these for now. https://bugzilla.redhat.com/1369484
OSSL_KEYS = \
	$(certsdir)/user-key-md5-des-sha1.p12 $(certsdir)/user-key-aes256-cbc-md5-des-sha256.p12 \
	$(certsdir)/user-key-pkcs8-pbes2-sha256.pem $(certsdir)/user-key-pkcs8-pbes2-sha256.der \
	$(certsdir)/user-key-pkcs8-pbes1-md5-des.pem $(certsdir)/user-key-pkcs8-pbes1-md5-des.der

DSA_KEYS = \
	$(certsdir)/dsa-key-pkcs1.pem $(certsdir)/dsa-key-pkcs1.der \
	$(certsdir)/dsa-key-pkcs1-aes128.pem \
	$(certsdir)/dsa-key-pkcs8.pem $(certsdir)/dsa-key-pkcs8.der \
	$(certsdir)/dsa-key-pkcs8-pbes2-sha1.pem $(certsdir)/dsa-key-pkcs8-pbes2-sha1.der \
	$(certsdir)/dsa-key-aes256-cbc-sha256.p12

USER_CERTS = $(certsdir)/user-cert.pem $(certsdir)/dsa-cert.pem $(certsdir)/ec-cert.pem
EXTRA_DIST = certs/ca.pem certs/ca-key.pem certs/user-cert.pem $(USER_KEYS) $(USER_CERTS) \
	$(OSSL_KEYS) $(DSA_KEYS) $(certsdir)/user-key-nonascii-password.p12 \
	pass-UTF-8 pass-ISO8859-2 \
	certs/server-cert.pem certs/server-key.pem configs/test1.passwd \
	common.sh configs/test-user-cert.config configs/test-user-pass.config \
	configs/user-cert.prm configs/server-cert.prm \
	softhsm2.conf.in softhsm ns.sh configs/test-dtls-psk.config \
	scripts/vpnc-script scripts/vpnc-script-detect-disconnect

dist_check_SCRIPTS = autocompletion $(am__append_3) $(am__append_4) \
	$(am__append_5)
@HAVE_CWRAP_TRUE@@TEST_PKCS11_TRUE@PKCS11_TOKENS = openconnect-test \
@HAVE_CWRAP_TRUE@@TEST_PKCS11_TRUE@	openconnect-test1 \
@HAVE_CWRAP_TRUE@@TEST_PKCS11_TRUE@	$(am__append_6) \
@HAVE_CWRAP_TRUE@@TEST_PKCS11_TRUE@	$(am__append_7)
# Neither GnuTLS or libp11 support this
#PKCS11_KEYS += object=DSA id=%02
@HAVE_CWRAP_TRUE@@TEST_PKCS11_TRUE@PKCS11_KEYS = object=RSA id=%01 \
@HAVE_CWRAP_TRUE@@TEST_PKCS11_TRUE@	object=EC id=%03
TESTS_ENVIRONMENT = srcdir="$(srcdir)" \
	top_builddir="$(top_builddir)" \
	key_list="$(USER_KEYS)" \
	pkcs11_keys="$(PKCS11_KEYS)" \
	pkcs11_tokens="$(PKCS11_TOKENS)"

C_TESTS = lzstest seqtest $(am__append_8) $(am__append_9)
@CHECK_DTLS_TRUE@bad_dtls_test_SOURCES = bad_dtls_test.c
@CHECK_DTLS_TRUE@bad_dtls_test_CFLAGS = $(OPENSSL_CFLAGS)
@CHECK_DTLS_TRUE@bad_dtls_test_LDADD = $(OPENSSL_LIBS)
serverhash_SOURCES = serverhash.c
serverhash_LDADD = ../libopenconnect.la $(SSL_LIBS)
OPENSSL = openssl
OSSLARGS = -in $< -out $@ -passout pass:password
OSSLARGSP12 = -inkey $< -out $@ -in $${KEYFILE%-key-pkcs8.pem}-cert.pem -passout pass:$${PASSWORD%-password}
SHM2_UTIL = SOFTHSM2_CONF=softhsm2.conf softhsm2-util
P11TOOL = SOFTHSM2_CONF=softhsm2.conf p11tool
all: all-am

.SUFFIXES:
.SUFFIXES: .c .lo .log .o .obj .test .test$(EXEEXT) .trs
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign tests/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
softhsm2.conf: $(top_builddir)/config.status $(srcdir)/softhsm2.conf.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

clean-noinstPROGRAMS:
	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list

bad_dtls_test$(EXEEXT): $(bad_dtls_test_OBJECTS) $(bad_dtls_test_DEPENDENCIES) $(EXTRA_bad_dtls_test_DEPENDENCIES) 
	@rm -f bad_dtls_test$(EXEEXT)
	$(AM_V_CCLD)$(bad_dtls_test_LINK) $(bad_dtls_test_OBJECTS) $(bad_dtls_test_LDADD) $(LIBS)

list-taps$(EXEEXT): $(list_taps_OBJECTS) $(list_taps_DEPENDENCIES) $(EXTRA_list_taps_DEPENDENCIES) 
	@rm -f list-taps$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(list_taps_OBJECTS) $(list_taps_LDADD) $(LIBS)

lzstest$(EXEEXT): $(lzstest_OBJECTS) $(lzstest_DEPENDENCIES) $(EXTRA_lzstest_DEPENDENCIES) 
	@rm -f lzstest$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(lzstest_OBJECTS) $(lzstest_LDADD) $(LIBS)

seqtest$(EXEEXT): $(seqtest_OBJECTS) $(seqtest_DEPENDENCIES) $(EXTRA_seqtest_DEPENDENCIES) 
	@rm -f seqtest$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(seqtest_OBJECTS) $(seqtest_LDADD) $(LIBS)

serverhash$(EXEEXT): $(serverhash_OBJECTS) $(serverhash_DEPENDENCIES) $(EXTRA_serverhash_DEPENDENCIES) 
	@rm -f serverhash$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(serverhash_OBJECTS) $(serverhash_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bad_dtls_test-bad_dtls_test.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/list-taps.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lzstest.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/seqtest.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/serverhash.Po@am__quote@ # am--include-marker

$(am__depfiles_remade):
	@$(MKDIR_P) $(@D)
	@echo '# dummy' >$@-t && $(am__mv) $@-t $@

am--depfiles: $(am__depfiles_remade)

.c.o:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<

.c.obj:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<

bad_dtls_test-bad_dtls_test.o: bad_dtls_test.c
@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bad_dtls_test_CFLAGS) $(CFLAGS) -MT bad_dtls_test-bad_dtls_test.o -MD -MP -MF $(DEPDIR)/bad_dtls_test-bad_dtls_test.Tpo -c -o bad_dtls_test-bad_dtls_test.o `test -f 'bad_dtls_test.c' || echo '$(srcdir)/'`bad_dtls_test.c
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/bad_dtls_test-bad_dtls_test.Tpo $(DEPDIR)/bad_dtls_test-bad_dtls_test.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='bad_dtls_test.c' object='bad_dtls_test-bad_dtls_test.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bad_dtls_test_CFLAGS) $(CFLAGS) -c -o bad_dtls_test-bad_dtls_test.o `test -f 'bad_dtls_test.c' || echo '$(srcdir)/'`bad_dtls_test.c

bad_dtls_test-bad_dtls_test.obj: bad_dtls_test.c
@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bad_dtls_test_CFLAGS) $(CFLAGS) -MT bad_dtls_test-bad_dtls_test.obj -MD -MP -MF $(DEPDIR)/bad_dtls_test-bad_dtls_test.Tpo -c -o bad_dtls_test-bad_dtls_test.obj `if test -f 'bad_dtls_test.c'; then $(CYGPATH_W) 'bad_dtls_test.c'; else $(CYGPATH_W) '$(srcdir)/bad_dtls_test.c'; fi`
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/bad_dtls_test-bad_dtls_test.Tpo $(DEPDIR)/bad_dtls_test-bad_dtls_test.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='bad_dtls_test.c' object='bad_dtls_test-bad_dtls_test.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bad_dtls_test_CFLAGS) $(CFLAGS) -c -o bad_dtls_test-bad_dtls_test.obj `if test -f 'bad_dtls_test.c'; then $(CYGPATH_W) 'bad_dtls_test.c'; else $(CYGPATH_W) '$(srcdir)/bad_dtls_test.c'; fi`

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-am

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-am

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

# Recover from deleted '.trs' file; this should ensure that
# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
# to avoid problems with "make -n".
.log.trs:
	rm -f $< $@
	$(MAKE) $(AM_MAKEFLAGS) $<

# Leading 'am--fnord' is there to ensure the list of targets does not
# expand to empty, as could happen e.g. with make check TESTS=''.
am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
am--force-recheck:
	@:

$(TEST_SUITE_LOG): $(TEST_LOGS)
	@$(am__set_TESTS_bases); \
	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
	redo_bases=`for i in $$bases; do \
	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
	            done`; \
	if test -n "$$redo_bases"; then \
	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
	  if $(am__make_dryrun); then :; else \
	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
	  fi; \
	fi; \
	if test -n "$$am__remaking_logs"; then \
	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
	       "recursion detected" >&2; \
	elif test -n "$$redo_logs"; then \
	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
	fi; \
	if $(am__make_dryrun); then :; else \
	  st=0;  \
	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
	  for i in $$redo_bases; do \
	    test -f $$i.trs && test -r $$i.trs \
	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
	    test -f $$i.log && test -r $$i.log \
	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
	  done; \
	  test $$st -eq 0 || exit 1; \
	fi
	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
	ws='[ 	]'; \
	results=`for b in $$bases; do echo $$b.trs; done`; \
	test -n "$$results" || results=/dev/null; \
	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
	  success=true; \
	else \
	  success=false; \
	fi; \
	br='==================='; br=$$br$$br$$br$$br; \
	result_count () \
	{ \
	    if test x"$$1" = x"--maybe-color"; then \
	      maybe_colorize=yes; \
	    elif test x"$$1" = x"--no-color"; then \
	      maybe_colorize=no; \
	    else \
	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
	    fi; \
	    shift; \
	    desc=$$1 count=$$2; \
	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
	      color_start=$$3 color_end=$$std; \
	    else \
	      color_start= color_end=; \
	    fi; \
	    echo "$${color_start}# $$desc $$count$${color_end}"; \
	}; \
	create_testsuite_report () \
	{ \
	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
	  result_count $$1 "PASS: " $$pass  "$$grn"; \
	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
	  result_count $$1 "FAIL: " $$fail  "$$red"; \
	  result_count $$1 "XPASS:" $$xpass "$$red"; \
	  result_count $$1 "ERROR:" $$error "$$mgn"; \
	}; \
	{								\
	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
	    $(am__rst_title);						\
	  create_testsuite_report --no-color;				\
	  echo;								\
	  echo ".. contents:: :depth: 2";				\
	  echo;								\
	  for b in $$bases; do echo $$b; done				\
	    | $(am__create_global_log);					\
	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
	if $$success; then						\
	  col="$$grn";							\
	 else								\
	  col="$$red";							\
	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
	fi;								\
	echo "$${col}$$br$${std}"; 					\
	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
	echo "$${col}$$br$${std}"; 					\
	create_testsuite_report --maybe-color;				\
	echo "$$col$$br$$std";						\
	if $$success; then :; else					\
	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
	  fi;								\
	  echo "$$col$$br$$std";					\
	fi;								\
	$$success || exit 1

check-TESTS: $(dist_check_SCRIPTS)
	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	trs_list=`for i in $$bases; do echo $$i.trs; done`; \
	log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
	exit $$?;
recheck: all $(dist_check_SCRIPTS)
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	bases=`for i in $$bases; do echo $$i; done \
	         | $(am__list_recheck_tests)` || exit 1; \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	log_list=`echo $$log_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
	        am__force_recheck=am--force-recheck \
	        TEST_LOGS="$$log_list"; \
	exit $$?
autocompletion.log: autocompletion
	@p='autocompletion'; \
	b='autocompletion'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
dtls-psk.log: dtls-psk
	@p='dtls-psk'; \
	b='dtls-psk'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
sigterm.log: sigterm
	@p='sigterm'; \
	b='sigterm'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
auth-username-pass.log: auth-username-pass
	@p='auth-username-pass'; \
	b='auth-username-pass'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
auth-certificate.log: auth-certificate
	@p='auth-certificate'; \
	b='auth-certificate'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
auth-nonascii.log: auth-nonascii
	@p='auth-nonascii'; \
	b='auth-nonascii'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
cert-fingerprint.log: cert-fingerprint
	@p='cert-fingerprint'; \
	b='cert-fingerprint'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
id-test.log: id-test
	@p='id-test'; \
	b='id-test'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
auth-pkcs11.log: auth-pkcs11
	@p='auth-pkcs11'; \
	b='auth-pkcs11'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
lzstest.log: lzstest$(EXEEXT)
	@p='lzstest$(EXEEXT)'; \
	b='lzstest'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
seqtest.log: seqtest$(EXEEXT)
	@p='seqtest$(EXEEXT)'; \
	b='seqtest'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
list-taps.log: list-taps$(EXEEXT)
	@p='list-taps$(EXEEXT)'; \
	b='list-taps'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
bad_dtls_test.log: bad_dtls_test$(EXEEXT)
	@p='bad_dtls_test$(EXEEXT)'; \
	b='bad_dtls_test'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
.test.log:
	@p='$<'; \
	$(am__set_b); \
	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
@am__EXEEXT_TRUE@.test$(EXEEXT).log:
@am__EXEEXT_TRUE@	@p='$<'; \
@am__EXEEXT_TRUE@	$(am__set_b); \
@am__EXEEXT_TRUE@	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)

distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(dist_check_SCRIPTS)
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile $(PROGRAMS)
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:
	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \
	mostlyclean-am

distclean: distclean-am
		-rm -f ./$(DEPDIR)/bad_dtls_test-bad_dtls_test.Po
	-rm -f ./$(DEPDIR)/list-taps.Po
	-rm -f ./$(DEPDIR)/lzstest.Po
	-rm -f ./$(DEPDIR)/seqtest.Po
	-rm -f ./$(DEPDIR)/serverhash.Po
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
		-rm -f ./$(DEPDIR)/bad_dtls_test-bad_dtls_test.Po
	-rm -f ./$(DEPDIR)/list-taps.Po
	-rm -f ./$(DEPDIR)/lzstest.Po
	-rm -f ./$(DEPDIR)/seqtest.Po
	-rm -f ./$(DEPDIR)/serverhash.Po
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am:

.MAKE: check-am install-am install-strip

.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-TESTS \
	check-am clean clean-generic clean-libtool \
	clean-noinstPROGRAMS cscopelist-am ctags ctags-am distclean \
	distclean-compile distclean-generic distclean-libtool \
	distclean-tags distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
	pdf pdf-am ps ps-am recheck tags tags-am uninstall \
	uninstall-am

.PRECIOUS: Makefile


# Nothing actually *depends* on the cert files; they are created manually
# and considered part of the sources, committed to the git tree. But for
# reference, the commands used to generate them are here...

keyfiles: $(USER_KEYS) $(USER_CERTS) $(certsdir)/server-cert.pem

# Strictly speaking this is only PKCS#1 for RSA. For EC it's probably
# best described as RFC5915§4, and no idea what defines it for DSA.
$(certsdir)/user-key-pkcs1.pem:
	$(OPENSSL) genrsa -out $@ 2432

$(certsdir)/dsa-key-pkcs1.pem:
	$(OPENSSL) dsaparam -genkey 1024 -out $@

$(certsdir)/ec-key-pkcs1.pem:
	$(OPENSSL) ecparam -genkey -out $@ -name prime256v1

# Even in OpenSSL 1.1, this creates the old encrypted PEM format.
$(certsdir)/user-key-pkcs1-aes128.pem: certs/user-key-pkcs1.pem
	$(OPENSSL) rsa $(OSSLARGS) -aes128

$(certsdir)/dsa-key-pkcs1-aes128.pem: certs/dsa-key-pkcs1.pem
	$(OPENSSL) dsa $(OSSLARGS) -aes128

$(certsdir)/ec-key-pkcs1-aes128.pem: certs/ec-key-pkcs1.pem
	$(OPENSSL) ec $(OSSLARGS) -aes128

# Plain unencrypted PKCS#8
%-key-pkcs8.pem: %-key-pkcs1.pem
	$(OPENSSL) pkcs8 $(OSSLARGS) -topk8 -nocrypt

%-key-pkcs8-pbes1-sha1-3des.pem: %-key-pkcs8.pem
	$(OPENSSL) pkcs8 $(OSSLARGS) -topk8 -v1 pbeWithSHA1And3-KeyTripleDES-CBC

# This is the default created by OpenSSL 1.0.2 with -topk8
%-key-pkcs8-pbes1-md5-des.pem: %-key-pkcs8.pem
	$(OPENSSL) pkcs8 $(OSSLARGS) -topk8 -v1 pbeWithMD5AndDES-CBC

%-key-pkcs8-pbes2-sha1.pem: %-key-pkcs8.pem
	$(OPENSSL) pkcs8 $(OSSLARGS) -topk8 -v2 aes256 -v2prf hmacWithSHA1

# This is the default created by OpenSSL 1.1 with -topk8
%-key-pkcs8-pbes2-sha256.pem: %-key-pkcs8.pem
	$(OPENSSL) pkcs8 $(OSSLARGS) -topk8 -v2 aes256 -v2prf hmacWithSHA256

%-key-sha1-3des-sha1.p12: %-key-pkcs8.pem %-cert.pem
	KEYFILE="$<"; $(OPENSSL) pkcs12 $(OSSLARGSP12) -export -macalg SHA1 \
		-certpbe pbeWithSHA1And3-KeyTripleDES-CBC -keypbe pbeWithSHA1And3-KeyTripleDES-CBC

%-key-sha1-3des-sha256.p12: %-key-pkcs8.pem %-cert.pem
	KEYFILE="$<"; $(OPENSSL) pkcs12 $(OSSLARGSP12) -export -macalg SHA256 \
		-certpbe pbeWithSHA1And3-KeyTripleDES-CBC -keypbe pbeWithSHA1And3-KeyTripleDES-CBC

%-key-md5-des-sha1.p12: %-key-pkcs8.pem %-cert.pem
	KEYFILE="$<"; $(OPENSSL) pkcs12 $(OSSLARGSP12) -export -macalg SHA1 \
		-certpbe pbeWithMD5AndDES-CBC -keypbe pbeWithMD5AndDES-CBC

%-key-aes256-cbc-sha256.p12: %-key-pkcs8.pem %-cert.pem
	KEYFILE="$<"; $(OPENSSL) pkcs12 $(OSSLARGSP12) -export -macalg SHA256 \
		-certpbe AES-256-CBC -keypbe AES-256-CBC

# NB: Needs OpenSSL 1.1 or newer
%-key-nonascii-password.p12: %-key-pkcs8.pem %-cert.pem
	LC_ALL=en_GB.UTF-8 PASSWORD="$$(cat $(srcdir)/pass-UTF-8)" KEYFILE="$<" ; \
	$(OPENSSL) pkcs12 $(OSSLARGSP12) -export -macalg SHA256 \
		-certpbe AES-256-CBC -keypbe AES-256-CBC

# This one makes GnuTLS behave strangely...
%-key-aes256-cbc-md5-des-sha256.p12: %-key-pkcs8.pem %-cert.pem
	KEYFILE="$<"; $(OPENSSL) pkcs12 $(OSSLARGSP12) -export -macalg SHA256 \
		-certpbe AES-256-CBC -keypbe pbeWithMD5AndDES-CBC

%.der: %.pem
	sed -e '0,/^-----BEGIN.*KEY-----/d' -e '/^-----END.*KEY-----/,$$d' $< | base64 -d > $@

$(certsdir)/server-cert.pem:
	$(OPENSSL) req -new -config $(srcdir)/configs/server-cert.prm -key $(certsdir)/server-key.pem -out $@.csr
	$(OPENSSL) x509 -days 3650 -CA $(certsdir)/ca.pem -CAkey $(certsdir)/ca-key.pem \
		-extfile $(srcdir)/configs/server-cert.prm -extensions req_EXT \
		-set_serial $(shell date +%s) -req -out $@ -in $@.csr

%-cert.csr: %-key-pkcs8.pem
	$(OPENSSL) req -new -config $(srcdir)/configs/user-cert.prm -key $< -out $@

%.pem: %.csr
	$(OPENSSL) x509 -days 3650 -CA $(certsdir)/ca.pem -CAkey $(certsdir)/ca-key.pem \
		-set_serial $(shell date +%s) -req -out $@ -in $<

# Nice and simple: Certs visible without login, public keys present in token
softhsm-setup0:
	$(SHM2_UTIL) --show-slots
	$(SHM2_UTIL) --init-token --free --label openconnect-test \
		--so-pin 12345678 --pin 1234

	$(SHM2_UTIL) --token openconnect-test --pin 1234 --import $(certsdir)/user-key-pkcs8.pem \
		--label RSA --id 01
	$(P11TOOL) --load-certificate $(certsdir)/user-cert.pem --no-mark-private \
		   --label RSA --id 01 --set-pin 1234 --login \
		   --write "pkcs11:token=openconnect-test;pin-value=1234"

	$(SHM2_UTIL) --token openconnect-test --pin 1234 --import $(certsdir)/dsa-key-pkcs8.pem \
		--label DSA --id 02
	$(P11TOOL) --load-certificate $(certsdir)/dsa-cert.pem --no-mark-private \
		   --label DSA --id 02 --set-pin 1234 --login \
		   --write "pkcs11:token=openconnect-test;pin-value=1234"

	$(SHM2_UTIL) --token openconnect-test --pin 1234 --import $(certsdir)/ec-key-pkcs8.pem \
			--label EC --id 03
	$(P11TOOL) --load-certificate $(certsdir)/ec-cert.pem --no-mark-private \
		   --label EC --id 03 --set-pin 1234 --login \
		   --write "pkcs11:token=openconnect-test;pin-value=1234"

# Second test: Import keys with GnuTLS so public key is absent
softhsm-setup1:
	$(SHM2_UTIL) --show-slots
	$(SHM2_UTIL) --init-token --free --label openconnect-test1 \
		--so-pin 12345678 --pin 1234

	$(P11TOOL) --load-certificate $(certsdir)/user-cert.pem --no-mark-private \
		   --load-privkey $(certsdir)/user-key-pkcs8.pem \
		   --label RSA --id 01 --login \
		   --write "pkcs11:token=openconnect-test1;pin-value=1234"

	$(P11TOOL) --load-certificate $(certsdir)/dsa-cert.pem --no-mark-private \
		   --load-privkey $(certsdir)/dsa-key-pkcs8.pem \
		   --label DSA --id 02 --login \
		   --write "pkcs11:token=openconnect-test1;pin-value=1234"

	$(P11TOOL) --load-certificate $(certsdir)/ec-cert.pem --no-mark-private \
		   --load-privkey $(certsdir)/ec-key-pkcs8.pem \
		   --label EC --id 03 --login \
		   --write "pkcs11:token=openconnect-test1;pin-value=1234"

# Third test: CKA_PRIVATE on certificates
softhsm-setup2:
	$(SHM2_UTIL) --show-slots
	$(SHM2_UTIL) --init-token --free --label openconnect-test2 \
		--so-pin 12345678 --pin 1234

	$(P11TOOL) --load-certificate $(certsdir)/user-cert.pem \
		   --load-privkey $(certsdir)/user-key-pkcs8.pem \
		   --label RSA --id 01 --login \
		   --write "pkcs11:token=openconnect-test2;pin-value=1234"

	$(P11TOOL) --load-certificate $(certsdir)/dsa-cert.pem \
		   --load-privkey $(certsdir)/dsa-key-pkcs8.pem \
		   --label DSA --id 02 --login \
		   --write "pkcs11:token=openconnect-test2;pin-value=1234"

	$(P11TOOL) --load-certificate $(certsdir)/ec-cert.pem \
		   --load-privkey $(certsdir)/ec-key-pkcs8.pem \
		   --label EC --id 03 --login \
		   --write "pkcs11:token=openconnect-test2;pin-value=1234"

# Fourth test: token lacks CKF_LOGIN_REQUIRED (#123)
softhsm-setup3:
	$(SHM2_UTIL) --show-slots
	$(SHM2_UTIL) --init-token --free --label openconnect-test3 \
		--so-pin 12345678 --pin 1234

# Remove the CKF_LOGIN_REQUIRED flag
	TOKOBJ=$$(grep -l openconnect-test3 $(srcdir)/softhsm/*/token.object); \
	if [ -n "$$TOKOBJ" ] && od -t x1 $$TOKOBJ | grep -q '^0000160.* 04 2d$$'; then \
		echo -en \\x29 | dd bs=1 count=1 conv=notrunc seek=127 of=$$TOKOBJ; \
	else \
		echo "Token file not understood"; \
		exit 1; \
	fi

	$(P11TOOL) --load-certificate $(certsdir)/user-cert.pem \
		   --load-privkey $(certsdir)/user-key-pkcs8.pem \
		   --label RSA --id 01 --login \
		   --write "pkcs11:token=openconnect-test3;pin-value=1234"

	$(P11TOOL) --load-certificate $(certsdir)/dsa-cert.pem \
		   --load-privkey $(certsdir)/dsa-key-pkcs8.pem \
		   --label DSA --id 02 --login \
		   --write "pkcs11:token=openconnect-test3;pin-value=1234"

	$(P11TOOL) --load-certificate $(certsdir)/ec-cert.pem \
		   --load-privkey $(certsdir)/ec-key-pkcs8.pem \
		   --label EC --id 03 --login \
		   --write "pkcs11:token=openconnect-test3;pin-value=1234"

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: