roll internal release tag

Implement and use Fast Posting for both parallel && fibre. Redo a bit of
the startup code. Implement a call to outer framework function so that
asynchronous events can be handled (e.g., speed negotia

Implement and use Fast Posting for both parallel && fibre. Redo a bit of
the startup code. Implement a call to outer framework function so that
asynchronous events can be handled (e.g., speed negotiation, target mode).

Roll internal release tags.

show more ...

Suggested by bde@freebsd.org- memcpy not necessarily good to use. D'oh- not in
the BSD DKI. Stop being lazy and finish the defines so MEMCPY becomes bzero
for FreeBSD.

add MEMZERO portability defines

clarify headers;move uninit to outer layer;remove watchdog

compilation fixes from Eklund

(requested by gibbs) Remove the SCSI_CAM option (and rework the isp driver
that had depended on it for compilation within or without CAM to use
__FreeBSD_version instead).

Roll revision, clean up a comment.

Update QLogic ISP support for CAM. Add preliminary target mode support.

Submitted by: Matthew Jacob <mjacob@feral.com>

Oops- osreldate.h is not around like I thought it would be... hmmm.. quick fix to get around this

Add support for the Qlogic ISP SCSI && FC/AL Adapters

isp(4): Rework firmware handling/loading

Correctly identify the active firmware in flash on adapters with
primary and secondary firmware region in flash.
Correctly identify the active NVRAM on adapt

isp(4): Rework firmware handling/loading

Correctly identify the active firmware in flash on adapters with
primary and secondary firmware region in flash.
Correctly identify the active NVRAM on adapters with primary
and secondary NVRAM region in flash.

Loading ispfw(4) moved from isp_pci_attach() to isp_reset().
Drop the reference to ispfw(4) after using it so one can kldunload(8) it.
New isp_load_ram() function to load either ispfw(4) or flash firmware
into RISC's RAM.
New functions to read data from flash. The old ones will be removed later.
A bunch of new helper functions to identify and validate active flash
regions for firmware, auxiliary and NVRAM.
Overhaul ISP_FW_* macros and make use of it when comparing firmware
versions. We can handle firmware versions up to 255.255.255.

Firmware load priority slightly changed:
For 27xx and newer adapters:
- load ispfw(4) firmware
- request (active) flash firmware information
- compare version numbers of ispfw(4) and flash firmware
- load firmware with highest version into RISC's RAM
- if loading ispfw(4) is disabled or failed - load firmware from flash
- if everything else fails use MBOX_LOAD_FLASH_FIRMWARE as fallback

For 26xx and older adapters nothing changed:
- load ispfw(4) firmware and load it into RISC's RAM
- if loading ispfw(4) is disabled or failed use MBOX_EXEC_FIRMWARE
- for 26xx a preceding MBOX_LOAD_FLASH_FIRMWARE is used

New read only sysctl(8)'s:
dev.isp.N.fw_version_run: the firmware version actually running
dev.isp.N.fw_version_ispfw: the firmware version provided by ispfw(4)
dev.isp.N.fw_version_flash: the (active) firmware version in flash

While here:
- firmware attribute handling/parsing reworked
+ renamed defines from ISP2400_FW_ATTR_* to ISP_FW_ATTR_*
+ changed values to match new handling/parsing
+ added some more attributes
- enable FLT support on 26xx based adapters
- log level adjustments
- new function return status codes (some for now, some for later use)
- some minor style changes

Tested and approved to work on real hardware with:
- Qlogic ISP 2532 (QLogic QLE2560 8Gb FC Adapter)
- Qlogic ISP 2031 (QLogic QLE2662 16Gbit 2Port FC Adapter)
- Qlogic ISP 2722 (QLogic QLE2690 16Gb FC Adapter)
- Qlogic ISP 2812 (QLogic QLE2772 32Gbit 2Port FC Adapter)

PR: 273263
Reviewed by: mav
Pull Request: https://github.com/freebsd/freebsd-src/pull/877
MFC after: 1 month
Sponsored by: Technical University of Munich

show more ...

sys: Remove $FreeBSD$: one-line .c comment pattern

Remove /^/[*/]\s*\$FreeBSD\$.*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

More cleanup in response queue and reset code.

Remove more legacy of parallel SCSI.

Remove concept of mbox_sleep_ok.

It was broken by design and unused for years due to conflicts between
different threads, fighting for the same set of mailbox registers, not
designed for multiple re

Remove concept of mbox_sleep_ok.

It was broken by design and unused for years due to conflicts between
different threads, fighting for the same set of mailbox registers, not
designed for multiple requests at a time. So either request has to be
synchronous and spin under the lock, or it should be sent asynchronously
through the queues as Mailbox Command IOCB or some other way.

This removes any OS specifics from the wait code, so it can be inlined.

show more ...

Remove remnants of execthrottle and maxalloc parameters.

The first was obsolete since 26xx, not used on 25xx and not needed on 24xx.
The second seems never worked on 24xx and up.

Increase queue depths from 1024/256 to 8192/1024 IOCBs.

Qlogic chips store S/G lists in the same queue as requests themselves. In
the worst case 1MB I/O may require up to 52 IOCBs, that means queue

Increase queue depths from 1024/256 to 8192/1024 IOCBs.

Qlogic chips store S/G lists in the same queue as requests themselves. In
the worst case 1MB I/O may require up to 52 IOCBs, that means queue of 1024
IOCBs can store only 19 of such requests. The increase reduces chances of
overflow, while we should be able to afford additional 512KB of RAM per HBA.
The Linux driver uses comparable numbers.

While there, decouple ATIO queue size from response queue size. There is
no reason for them to be equal.

show more ...

Cleanup DMA handling.

- Make isp_start() to set all the IOCB fields aside of S/G list, removing
extra information from isp_send_cmd(), now only doing S/G lists and sending.
- Turn DMA setup/free f

Cleanup DMA handling.

- Make isp_start() to set all the IOCB fields aside of S/G list, removing
extra information from isp_send_cmd(), now only doing S/G lists and sending.
- Turn DMA setup/free from being card and PCI-specific into OS-specific,
instead add new card-specific method for isp_send_cmd(). Previously this
function was a monster handling all the cards.
- Remove double error code translation.

show more ...

Remove parallel SCSI and 1/2Gb FC support from isp(4).

This removes 288KB (36%) of the driver code and zillions of hacks and
workarounds, making single driver uniformly support several different
gen

Remove parallel SCSI and 1/2Gb FC support from isp(4).

This removes 288KB (36%) of the driver code and zillions of hacks and
workarounds, making single driver uniformly support several different
generations of hardware interfaces, not counting minor card variations.
After years of the hopeless fight, I don't think it worth to continue
support for hardware obsolete for 15-20 years. Instead much cleaner
now code should allow to move forward toward better locking, multiple
queues and other cool features.

All the remaining Qlogic cards starting from 4Gb 24xx to 32Gb 27xx use
the same hardware/firmware interface with minor incremental improvements,
so it seems to be a good new starting point. Except one PCI-X model all
all of them are PCIe and so still usable in modern systems.

Discussed with: ken, scottl, jpaetzel, imp
Relnotes: yes

show more ...

Move ecmd memory allocation itto separate DMA tag.

Ecmd memory is not directly related to the request queue, only referenced
from it sometimes in target mode. Separate allocation should be easier
i

Move ecmd memory allocation itto separate DMA tag.

Ecmd memory is not directly related to the request queue, only referenced
from it sometimes in target mode. Separate allocation should be easier
in case of fragmented memory and can be skipped when target is not built.

MFC after: 1 month

show more ...

Introduce support of SCSI Command Priority.

SAM-3 specification introduced concept of Task Priority, that was renamed
to Command Priority in SAM-4, and supported by all modern SCSI transports.
It pr

Introduce support of SCSI Command Priority.

SAM-3 specification introduced concept of Task Priority, that was renamed
to Command Priority in SAM-4, and supported by all modern SCSI transports.
It provides 15 levels of relative priorities: 1 - highest, 15 - lowest and
0 - default. SAT specification for SATA devices translates priorities 1-3
into NCQ high priority.

This change adds new "priority" field into empty spots of struct ccb_scsiio
and struct ccb_accept_tio of CAM and struct ctl_scsiio of CTL. Respective
support is added into iscsi(4), isp(4), mpr(4), mps(4) and ocs_fc(4) drivers
for both initiator and where applicable target roles. Minimal support was
added to CTL to receive the priority value from different frontends, pass it
between HA controllers and report in few places.

This patch does not add consumers of this functionality, so nothing should
really change yet, since the field is still set to 0 (default) on initiator
and not actively used on target. Those are to be implemented separately.

I've confirmed priority working on WD Red SATA disks connected via mpr(4)
and properly transferred to CTL target via iscsi(4), isp(4) and ocs_fc(4).

While there, added missing tag_action support to ocs_fc(4) initiator role.

MFC after: 1 month
Relnotes: yes
Sponsored by: iXsystems, Inc.

show more ...

Remove sparc64 kernel support

Remove all sparc64 specific files
Remove all sparc64 ifdefs
Removee indireeect sparc64 ifdefs

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...