Convert sysctl sbuf usage to use a fully dynaic sbuf. This is strictly
needed, but it silences an erroneous Coverity warning and makes the code a
little more logically consistent. Also mark the sys

Convert sysctl sbuf usage to use a fully dynaic sbuf. This is strictly
needed, but it silences an erroneous Coverity warning and makes the code a
little more logically consistent. Also mark the sysctl as MPSAFE.

Sponsored by: Netflix

show more ...

Add the ability to report and set debug flags as text strings instead of
just integer flags. Report both for convenience.

Submitted by: Eygene Ryabinkin (manpage)
Sponsored by: Netflix

Add infrastructure for allocating multiple MSI-X interrupts. Also
add more fine-tuned controls for allocating requests and replies.

Sponsored by: Netflix

Fix intrhook release in MPR and MPS for EARLY_AP_STARTUP.

Reported by: Limelight
Sponsored by: Netflix

More code refactoring in preparation for enabling multiqueue.

Sponsored by: Netflix

Start separating the LSI drivers into per-queue structures. No
functional change.

Sponsored by: Netflix

Start overhauling debug printing in the MPS and MPR drivers. The focus of this
commit it to make initiazation less chatty in the normal case, and more useful
and informative when real debugging is t

Start overhauling debug printing in the MPS and MPR drivers. The focus of this
commit it to make initiazation less chatty in the normal case, and more useful
and informative when real debugging is turned on.

Reviewed by: ken (earlier version)
Sponsored by: Netflix

show more ...

Changes to make mps(4) and mpr(4) handle reinit with reallocation.

When the mps(4) and mpr(4) drivers need to reinitialize the
firmware, they sometimes need to reallocate all of the memory
allocated

Changes to make mps(4) and mpr(4) handle reinit with reallocation.

When the mps(4) and mpr(4) drivers need to reinitialize the
firmware, they sometimes need to reallocate all of the memory
allocated by the driver. The reallocation happens whenever the IOC
Facts change. That should only happen after a firmware upgrade.

If the reinitialization happens as a result of a timed out command
sent to the card, the command that timed out and triggered the
reinit may have been freed if iocfacts_allocate() reallocated all
memory. If the caller attempts to access the command after that,
the kernel will panic because the caller will be dereferencing
freed memory.

The solution is to set a flag in the softc when we reallocate,
and avoid dereferencing the command strucure if we've reallocated.

The changes are largely the same in both drivers, since mpr(4) is a
derivative of mps(4).

o In iocfacts_allocate(), if the IOC Facts have changed and we
need to reallocate, set the REALLOCATED flag in the softc.

o Change wait_command() to take a struct mps_command ** instead of
a struct mps_command *. This allows us to NULL out the caller's
command pointer if we have to reinit the controller and the data
structures get reallocated. (The REALLOCATED flag will be set
in the softc if that has happened.)

o In every place that calls wait_command(), make sure we handle
the case where the command is NULL after the call.

o The mpr(4) driver has mpr_request_polled() which can also
reinitialize the card. Also check for reallocation there.

Reviewed by: scottl, slm
MFC after: 1 week
Sponsored by: Spectra Logic

show more ...

Change from using underbar function names to normal function names for
the informational print functions. Collapse the debug API a bit to be
more generic and not require as much code duplication. W

Change from using underbar function names to normal function names for
the informational print functions. Collapse the debug API a bit to be
more generic and not require as much code duplication. While here, fix
a bug in MPS that was already fixed in MPR.

show more ...

Split the interrupt setup code into two parts: allocation and configuration.
Do the allocation before requesting the IOCFacts message. This triggers
the LSI firmware to recognize the multiqu

Split the interrupt setup code into two parts: allocation and configuration.
Do the allocation before requesting the IOCFacts message. This triggers
the LSI firmware to recognize the multiqueue should be enabled if available.
Multiqueue isn't used by the driver yet, but this also fixes a problem with
the cached IOCFacts not matching latter checks, leading to potential problems
with error recovery.

As a side-effect, fetch the driver tunables as early as possible.

Reviewed by: slm
Obtained from: Netflix
Differential Revision: D9243

show more ...

Fix spurious timeouts on commands sent to mps(4) and mpr(4) controllers.

mps_wait_command() and mpr_wait_command() were using getmicrotime() to
determine elapsed time when checking for a timeout in

Fix spurious timeouts on commands sent to mps(4) and mpr(4) controllers.

mps_wait_command() and mpr_wait_command() were using getmicrotime() to
determine elapsed time when checking for a timeout in polled mode.
getmicrotime() isn't guaranteed to monotonically increase, and that
caused spurious timeouts occasionally.

Switch to using getmicrouptime(), which does increase monotonically.
This fixes the spurious timeouts in my test case.

Reviewed by: slm, scottl
MFC after: 3 days
Sponsored by: Spectra Logic

show more ...

Fix several problems with mapping code.

Reviewed by: ken, scottl, asomers, ambrisko, mav
Approved by: ken, mav
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10861

Add tri-mode support (SAS/SATA/PCIe).

This includes NVMe device support and adds support for the following adapters:
SAS 3408
SAS 3416
SAS 3508
SAS 3516
SAS 3616
SAS 3708

Add tri-mode support (SAS/SATA/PCIe).

This includes NVMe device support and adds support for the following adapters:
SAS 3408
SAS 3416
SAS 3508
SAS 3516
SAS 3616
SAS 3708
SAS 3716

Reviewed by: ken, scottl, asomers, mav
Approved by: ken, scottl, mav
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D10095

show more ...

Add a fallback to the device mapper logic. We've seen systems in the field
that are apparently misconfigured by the manufacturer and cause the mapping
logic to fail. The fallback allows drive numbe

Add a fallback to the device mapper logic. We've seen systems in the field
that are apparently misconfigured by the manufacturer and cause the mapping
logic to fail. The fallback allows drive numbers to be assigned based on the
PHY number that they're attached to. Add sysctls and tunables to overrid
this new behavior, but they should be considered only necessary for debugging.

Reviewed by: imp, smh
Obtained from: Netflix
MFC after: 3 days
Sponsored by: D8403

show more ...

Use real values to calculate Max I/O size instead of guessing.

Reviewed by: ken, scottl
Approved by: ken, scottl, ambrisko (mentors)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.

Use real values to calculate Max I/O size instead of guessing.

Reviewed by: ken, scottl
Approved by: ken, scottl, ambrisko (mentors)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7043

show more ...

Change logging level for a debug string to use MPR_LOG instead of MPR_INFO.

Approved by: ken, scottl, ambrisko
MFC after: 1 week

No log bit in IOCStatus and endian-safe changes.

Use MPI2_IOCSTATUS_MASK when checking IOCStatus to mask off the log bit, and
make a few more things endian-safe.

Reviewed by: ken, scottl, ambris

No log bit in IOCStatus and endian-safe changes.

Use MPI2_IOCSTATUS_MASK when checking IOCStatus to mask off the log bit, and
make a few more things endian-safe.

Reviewed by: ken, scottl, ambrisko, asomers
Approved by: ken, scottl, ambrisko
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6097

show more ...

Add support for the Broadcom (Avago/LSI) 9305 16 and 24 port HBA's.

Reviewed by: ken, scottl, ambrisko, asomers
Approved by: ken, scottl, ambrisko
MFC after: 1 week
Relnotes: yes
Diffe

Add support for the Broadcom (Avago/LSI) 9305 16 and 24 port HBA's.

Reviewed by: ken, scottl, ambrisko, asomers
Approved by: ken, scottl, ambrisko
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D6098

show more ...

Several style changes and add copyrights for 2016.

Reviewed by: ken, scottl, ambrisko, asomers
Approved by: ken, scottl, ambrisko
MFC after: 1 week
Differential Revision: https://reviews.fre

Several style changes and add copyrights for 2016.

Reviewed by: ken, scottl, ambrisko, asomers
Approved by: ken, scottl, ambrisko
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6103

show more ...

sys/dev: minor spelling fixes.

Most affect comments, very few have user-visible effects.

sys: use our roundup2/rounddown2() macros when param.h is available.

rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really

sys: use our roundup2/rounddown2() macros when param.h is available.

rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.

This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.

show more ...

Remove _FreeBSD_version check for something that was only an issue with
9-CURRENT.

Obtained from: Netlfix, Inc
MFC after: 3 days

The wrong commit message was given with r283632. This is the correct message.

- Updated all files with 2015 Avago copyright, and updated LSI's copyright
dates.

- Changed all of the PCI device st

The wrong commit message was given with r283632. This is the correct message.

- Updated all files with 2015 Avago copyright, and updated LSI's copyright
dates.

- Changed all of the PCI device strings from LSI to Avago Technologies (LSI).

- Added a sysctl variable to control how StartStopUnit behavior works. User can
select to spin down disks based on if disk is SSD or HDD.

- Inquiry data is required to tell if a disk will support SSU at shutdown or
not. Due to the addition of mpssas_async, which gets Advanced Info but not
Inquiry data, the setting of supports_SSU was moved to the
mpssas_scsiio_complete function, which snoops for any Inquiry commands. And,
since disks are shutdown as a target and not a LUN, this process was
simplified by basing it on targets and not LUNs.

- Added a sysctl variable that sets the amount of time to retry after sending a
failed SATA ID command. This helps with some bad disks and large disks that
require a lot of time to spin up. Part of this change was to add a callout to
handle timeouts with the SATA ID command. The callout function is called
mpssas_ata_id_timeout(). (Fixes PR 191348)

- Changed the way resets work by allowing I/O to continue to devices that are
not currently under a reset condition. This uses devq's instead of simq's and
makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function
called mpssas_prepare_tm().

- Some changes were made to reduce code duplication when getting a SAS address
for a SATA disk.

- Fixed some formatting and whitespace.

- Bump version of mps driver to 9.255.01.00-fbsd

PR: 191348
Reviewed by: ken, scottl
Approved by: ken, scottl
MFC after: 1 week

show more ...

The wrong commit message was given with r283632. To get the correct commit
message synced to the changes in r283632, those changes are now backed out.
Another commit will be done that is exactly the

The wrong commit message was given with r283632. To get the correct commit
message synced to the changes in r283632, those changes are now backed out.
Another commit will be done that is exactly the same as r283632 except it will
have to correct commit message.

Approved by: ken, scottl, asomers, gibbs

show more ...

This setting of stop_at_shutdown should have been removed with r279253

Approved by: ken
MFC after: 1 week