sfxge: [Sorrento] support writing of MUM firmware

When writing the MUM firmware the chunk size must be equal to the erase
size.

Submitted by: Laurence Evans <levans at solarflare.com>
Sponsored b

sfxge: [Sorrento] support writing of MUM firmware

When writing the MUM firmware the chunk size must be equal to the erase
size.

Submitted by: Laurence Evans <levans at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4388

show more ...

sfxge: support PERMIT_SET_MAC_WHEN_FILTERS_INSTALLED flag

Use flag on vadapter alloc when reported as a supported capability.
Use the slow device reset only when the capability is missing.

Submitte

sfxge: support PERMIT_SET_MAC_WHEN_FILTERS_INSTALLED flag

Use flag on vadapter alloc when reported as a supported capability.
Use the slow device reset only when the capability is missing.

Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4387

show more ...

sfxge: add prefast annotation to common code return types

Using a typedef for common code return types (rather than "int")
allows the Prefast static analyser to understand when a function
has been s

sfxge: add prefast annotation to common code return types

Using a typedef for common code return types (rather than "int")
allows the Prefast static analyser to understand when a function
has been successful (and thus when its postconditions must hold).

This greatly reduces then number of false positives reported by
prefast for error paths in common code functions.

Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days

show more ...

sfxge: add 7xxx NICs family support

Support 7xxx adapters including firmware-assisted TSO and VLAN tagging:

- Solarflare Flareon Ultra 7000 series 10/40G adapters:
- Solarflare SFN7042Q QSFP+

sfxge: add 7xxx NICs family support

Support 7xxx adapters including firmware-assisted TSO and VLAN tagging:

- Solarflare Flareon Ultra 7000 series 10/40G adapters:
- Solarflare SFN7042Q QSFP+ Server Adapter
- Solarflare SFN7142Q QSFP+ Server Adapter

- Solarflare Flareon Ultra 7000 series 10G adapters:
- Solarflare SFN7022F SFP+ Server Adapter
- Solarflare SFN7122F SFP+ Server Adapter
- Solarflare SFN7322F Precision Time Synchronization Server Adapter

- Solarflare Flareon 7000 series 10G adapters:
- Solarflare SFN7002F SFP+ Server Adapter

Support utilities to configure adapters and update firmware.

The work is done by Solarflare developers
(Andy Moreton, Andrew Lee and many others),
Artem V. Andreev <Artem.Andreev at oktetlabs.ru> and me.

Sponsored by: Solarflare Communications, Inc.
MFC after: 2 weeks
Causually read by: gnn
Differential Revision: https://reviews.freebsd.org/D2618

show more ...

sfxge: correct event queue interrupt moderation timer quanta

Submitted by: Andrew Lee <alee at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)

sfxge: style fixes and cleanup

Sync endif comment with conditional.
BOOTROM and SIENA_BOOTROM are the same, but highlight that it is Siena.
Restore commented out assertion.
Sync comments with out-of

sfxge: style fixes and cleanup

Sync endif comment with conditional.
BOOTROM and SIENA_BOOTROM are the same, but highlight that it is Siena.
Restore commented out assertion.
Sync comments with out-of-tree driver.

Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)

show more ...

sfxge: allow TX and RX queue limits to be changed

Before the common code had hard coded limits on the IDs RXQs and TXQs could
be created with which were suited for the Windows driver with VMQ, and s

sfxge: allow TX and RX queue limits to be changed

Before the common code had hard coded limits on the IDs RXQs and TXQs could
be created with which were suited for the Windows driver with VMQ, and so
would prevent queues with IDs greater than or equal to 259 (for TXQs) or 768
(for RXQs) from being created. This change allows the limits to be set in
efsys.h, so that all 1024 queues can be created during new manftest tests.
Also, the descriptor cache sizes were also hard coded to values suited to
the smaller queue counts, and so it was necessary to make them configurable
as well.

Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)

show more ...

sfxge: never set RX_DESCQ_EN during self-test

We must not enable RX queues with random parameters when they are
mapped into a VF with an untrusted driver. It's probably not a good
idea to do this a

sfxge: never set RX_DESCQ_EN during self-test

We must not enable RX queues with random parameters when they are
mapped into a VF with an untrusted driver. It's probably not a good
idea to do this anyway, so take this bit out of the table test masks.

Submitted by: Ben Hutchings
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)

show more ...

sfxge: add Florence R7 turbo mode support to common code

Submitted by: Andrew Lee <alee at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)

sfxge: support variable-length response to MCDI GET_BOARD_CFG

Allocate the minimum or maximum response length for GET_BOARD_CFG as
appropriate. When looking up firmware subtypes by partition ID,
ch

sfxge: support variable-length response to MCDI GET_BOARD_CFG

Allocate the minimum or maximum response length for GET_BOARD_CFG as
appropriate. When looking up firmware subtypes by partition ID,
check the ID against the actual response length.

Merge of the patch made by Ben Hutchings in 2011.

Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)

show more ...

sfxge: style fixes

Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)

Bandaid for compiling with gcc.

sfxge: Add $FreeBSD$ tags to common code files.

Requested by: bz

Add the sfxge(4) device driver, providing support for 10Gb Ethernet adapters
based on Solarflare SFC9000 family controllers. The driver supports jumbo
frames, transmit/receive checksum offload, TCP

Add the sfxge(4) device driver, providing support for 10Gb Ethernet adapters
based on Solarflare SFC9000 family controllers. The driver supports jumbo
frames, transmit/receive checksum offload, TCP Segmentation Offload (TSO),
Large Receive Offload (LRO), VLAN checksum offload, VLAN TSO, and Receive Side
Scaling (RSS) using MSI-X interrupts.

This work was sponsored by Solarflare Communications, Inc.

My sincere thanks to Ben Hutchings for doing a lot of the hard work!

Sponsored by: Solarflare Communications, Inc.
MFC after: 3 weeks

show more ...

sfxge: clean up empty lines in .c and .h files

sfxge(4): guard Rx scale code with corresponding option

Previously only some of the code was guarded by this which caused
a build error when EFSYS_OPT_RX_SCALE is 0 (e.g. in manftest).

Submitted by

sfxge(4): guard Rx scale code with corresponding option

Previously only some of the code was guarded by this which caused
a build error when EFSYS_OPT_RX_SCALE is 0 (e.g. in manftest).

Submitted by: Tom Millington <tmillington at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18280

show more ...

sfxge(4): fix out of bounds read when dereferencing sdup

Introduce and use macro to make sure that MCDI buffers allocated
on stack are rounded up properly.

Submitted by: Gautam Dawar <gdawar at s

sfxge(4): fix out of bounds read when dereferencing sdup

Introduce and use macro to make sure that MCDI buffers allocated
on stack are rounded up properly.

Submitted by: Gautam Dawar <gdawar at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18259

show more ...

sfxge(4): get max supported value for action MARK

The mark value for MATCH_ACTION_MARK has a maximum value.
Requesting a value larger than the maximum will cause the
filter insertion to fail with EI

sfxge(4): get max supported value for action MARK

The mark value for MATCH_ACTION_MARK has a maximum value.
Requesting a value larger than the maximum will cause the
filter insertion to fail with EINVAL. This patch allows the
driver to check the value at the filter validation.

Submitted by: Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18240

show more ...

sfxge(4): get actions MARK and FLAG support

Filter actions MARK and FLAG are supported on Medford2 by DPDK
firmware variant.

Submitted by: Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by

sfxge(4): get actions MARK and FLAG support

Filter actions MARK and FLAG are supported on Medford2 by DPDK
firmware variant.

Submitted by: Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18238

show more ...

sfxge(4): detect equal stride super-buffer support

Equal stride super-buffer Rx mode is supported on Medford2 by
DPDK firmware variant.

Sponsored by: Solarflare Communications, Inc.
Differential

sfxge(4): detect equal stride super-buffer support

Equal stride super-buffer Rx mode is supported on Medford2 by
DPDK firmware variant.

Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18235

show more ...

sfxge(4): honour packed stream RSS restriction

Packed stream firmware variant on EF10 adapters has a
number of properties which must be taken into account:

- Only one exclusive RSS context is avai

sfxge(4): honour packed stream RSS restriction

Packed stream firmware variant on EF10 adapters has a
number of properties which must be taken into account:

- Only one exclusive RSS context is available per port.
- Only IP addresses can contribute to the hash value.

Huntington and Medford have one more limitation which
is important for the drivers capable of packed stream:

- Hash algorithm is non-standard (i.e. non-Toeplitz).
This implies XORing together source + destination
IP addresses (or last four bytes in the case of IPv6)
and using the result as the input to a Toeplitz hash.

This patch provides a number of improvements in order
to treat the mentioned limitations in the common code.

If the firmware variant is packed stream, the list of
supported hash tuples will include less variants, and
the maximum number of RSS contexts will be set to one.

Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18232

show more ...

sfxge(4): support more RSS hash configurations

Modern firmwares on EF10 adapters have support for
more traffic classes eligible for hash computation.
Also, it has become possible to adjust hashing p

sfxge(4): support more RSS hash configurations

Modern firmwares on EF10 adapters have support for
more traffic classes eligible for hash computation.
Also, it has become possible to adjust hashing per
individual class and select distinct packet fields
which will be able to contribute to the hash value.

This patch adds support for the mentioned features.

Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18231

show more ...

sfxge(4): report no Tx checksum FW subvariant support

Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18226

sfxge(4): retrieve number of MAC stats from NIC

This reports the number of stats (and hence the DMA buffer size)
for MAC stats. If MC_GET_CAPABABILITIES_V4 is not supported then
use the legacy Siena

sfxge(4): retrieve number of MAC stats from NIC

This reports the number of stats (and hence the DMA buffer size)
for MAC stats. If MC_GET_CAPABABILITIES_V4 is not supported then
use the legacy Siena-compatible MC_CMD_MAC_NSTATS value.

Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18173

show more ...

sfxge(4): support runtime VI window size

Medford2 uses a configurable VI window size, and requires
updates to register accesses to use a runtime VI window size
rather than the *_STEP register consta

sfxge(4): support runtime VI window size

Medford2 uses a configurable VI window size, and requires
updates to register accesses to use a runtime VI window size
rather than the *_STEP register constants used for earlier
controllers.

Update the common code to query the VI window size via MCDI,
and add new EFX_BAR_VI_* accessor macros for per-VI registers.

The existing EFX_BAR_TBL_* macros can be used for non-VI
register tables (and for code that can never be called for
a Medford2 controller e.g. Siena-only code).

Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18158

show more ...