After repo copy from ak452x.[ch]: SPIcds is the I2S SPI audio codec code
used by the Envy* drivers.

Submitted by: "Konstantin Dimitrov" <kosio.dimitrov@gmail.com>

- fix compatibility with newer versions of FreeBSD
- fix all warnings during compilation
- fix obvious bugs
- add support for more cards

Now supported:
- M-Audio Delta Dio 2496
- M-Audio Audiophil

- fix compatibility with newer versions of FreeBSD
- fix all warnings during compilation
- fix obvious bugs
- add support for more cards

Now supported:
- M-Audio Delta Dio 2496
- M-Audio Audiophile 2496
- Terratec DMX 6fire

Known bugs (detected by Nokolas and Stefan):
- $ kldunload snd_ak452x.ko
Warning: memory type ak452x leaked memory on destroy (1 allocations,
64 bytes leaked).
- No sound in KDE: Everything works fine at the console but when I load KDE
(3.5.3) the sound stutters and plays at less then 1/2 speed.
- 'mixer: WRITE_MIXER: Device not configured' The message repeats x
times at system startup, x = whatever hw.snd.maxautovchans is set to.
(this is because only vol, pcm and line are supported, but the driver
shows more than those mixer devices and setting those additional mixers
results in this error message)
- vchans don't work
- 24 bit playback not supported (only 16/32 bit)
- after kld(un)loading some times, the card fails to be probed until reboot

Datasheets are available from:
http://www.nbritton.org/uploads/envy24/
http://www.asahi-kasei.co.jp/akm/en/product/ak4528/ak4528_f01e.pdf
http://www.asahi-kasei.co.jp/akm/en/product/ak4528/ekd4528-01.pdf
http://www.asahi-kasei.co.jp/akm/en/product/ak4524/ak4524_f03e.pdf
http://www.asahi-kasei.co.jp/akm/en/product/ak4524/ekd4524.pdf
http://www.wolfson.co.uk/uploads/documents/en/WM8728.pdf
http://www.richtech.co.kr/down/richtek/RT9131.pdf
http://xkodi.svobodno.com/xkodi/space71.html
http://people.freebsd.org/~lofi/envy24.pdf
http://people.freebsd.org/~lofi/4524.pdf

Submitted by: Konstantin Dimitrov <kosio.dimitrov@gmail.com>
Tested by: Nikolas Britton <nikolas.britton@gmail.com>
Stefan Ehmann <shoesoft@gmx.net>

show more ...

dd the envy24 driver as is to the tree. It's not connected to the build
yet. More commits to follow.

I got no response from the author, but since the driver is BSD licensed
I don't think he will com

dd the envy24 driver as is to the tree. It's not connected to the build
yet. More commits to follow.

I got no response from the author, but since the driver is BSD licensed
I don't think he will complain. :-)

I got it from http://people.freebsd.org/~lofi/envy24.tar.gz

Written by: Katsurajima Naoto <raven@katsurajima.seya.yokohama.jp>

show more ...

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Partially fix indentation issues to improve readability helping cooperation with
Dragonfly folks

PR: 194785
Submitted by: François Tigeot (ftigeot@wolfpond.org)

Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.

This means that their use is restricted to a single C file.

Fix a brain-o: wrong case statement semantics.

Found with: clang

Start copyright notices with /*-

Sound Mega-commit. Expect further cleanup until code freeze.

For a slightly thorough explaination, please refer to
[1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html .

Summary of changes includ

Sound Mega-commit. Expect further cleanup until code freeze.

For a slightly thorough explaination, please refer to
[1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html .

Summary of changes includes:

1 Volume Per-Channel (vpc). Provides private / standalone volume control
unique per-stream pcm channel without touching master volume / pcm.
Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for
backwards compatibility, SOUND_MIXER_PCM through the opened dsp device
instead of /dev/mixer. Special "bypass" mode is enabled through
/dev/mixer which will automatically detect if the adjustment is made
through /dev/mixer and forward its request to this private volume
controller. Changes to this volume object will not interfere with
other channels.

Requirements:
- SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which
require specific application modifications (preferred).
- No modifications required for using bypass mode, so applications
like mplayer or xmms should work out of the box.

Kernel hints:
- hint.pcm.%d.vpc (0 = disable vpc).

Kernel sysctls:
- hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer
bypass mode.
- hw.snd.vpc_autoreset (default: 1). By default, closing/opening
/dev/dsp will reset the volume back to 0 db gain/attenuation.
Setting this to 0 will preserve its settings across device
closing/opening.
- hw.snd.vpc_reset (default: 0). Panic/reset button to reset all
volume settings back to 0 db.
- hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value.

2 High quality fixed-point Bandlimited SINC sampling rate converter,
based on Julius O'Smith's Digital Audio Resampling -
http://ccrma.stanford.edu/~jos/resample/. It includes a filter design
script written in awk (the clumsiest joke I've ever written)
- 100% 32bit fixed-point, 64bit accumulator.
- Possibly among the fastest (if not fastest) of its kind.
- Resampling quality is tunable, either runtime or during kernel
compilation (FEEDER_RATE_PRESETS).
- Quality can be further customized during kernel compilation by
defining FEEDER_RATE_PRESETS in /etc/make.conf.

Kernel sysctls:
- hw.snd.feeder_rate_quality.
0 - Zero-order Hold (ZOH). Fastest, bad quality.
1 - Linear Interpolation (LINEAR). Slightly slower than ZOH,
better quality but still does not eliminate aliasing.
2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC
quality always start from 2 and above.

Rough quality comparisons:
- http://people.freebsd.org/~ariff/z_comparison/

3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be
directly fed into the hardware.

4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can
be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf.

5 Transparent/Adaptive Virtual Channel. Now you don't have to disable
vchans in order to make digital format pass through. It also makes
vchans more dynamic by choosing a better format/rate among all the
concurrent streams, which means that dev.pcm.X.play.vchanformat/rate
becomes sort of optional.

6 Exclusive Stream, with special open() mode O_EXCL. This will "mute"
other concurrent vchan streams and only allow a single channel with
O_EXCL set to keep producing sound.

Other Changes:
* most feeder_* stuffs are compilable in userland. Let's not
speculate whether we should go all out for it (save that for
FreeBSD 16.0-RELEASE).
* kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org>
* pull out channel mixing logic out of vchan.c and create its own
feeder_mixer for world justice.
* various refactoring here and there, for good or bad.
* activation of few more OSSv4 ioctls() (see [1] above).
* opt_snd.h for possible compile time configuration:
(mostly for debugging purposes, don't try these at home)
SND_DEBUG
SND_DIAGNOSTIC
SND_FEEDER_MULTIFORMAT
SND_FEEDER_FULL_MULTIFORMAT
SND_FEEDER_RATE_HP
SND_PCM_64
SND_OLDSTEREO

Manual page updates are on the way.

Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many
unsung / unnamed heroes.

show more ...

All open fixes and improvements from Konstantin for which users had to
use patches so far:
+ Envy24:
- fix: broken init data for M Audio Delta DiO 2496
- add: support for M Audio Delta 44
-

All open fixes and improvements from Konstantin for which users had to
use patches so far:
+ Envy24:
- fix: broken init data for M Audio Delta DiO 2496
- add: support for M Audio Delta 44
- add: support for M Audio Delta 1010LT
Tested by: Dominique Goncalves, dominique.goncalves at gmail.com
- add: support for Terratec EWX 2496
Tested by: Stefan Sperling, stsp at stsp.name
- add: support for M Audio Delta 66
Tested by: Richard Bown, richard.bown at blueyonder.co.uk
- add: support for M Audio Delta 1010
Tested by: Andrew Reilly, areilly at bigpond.net.au
+ Envy24HT:
- add: support for Terrasoniq TS22PCI
- fix: M-Audio Revolution 5.1 sound volume is very low
Reported by: Oliver Hartmann, ohartman at zedat.fu-berlin.de
Andrey Slusar, anrays at gmail.com
Tested by: Andrey Slusar, anrays at gmail.com
Rusu Silviu, arol.the at gmail.com
- fix: M-Audio Revolution 7.1 sound is distorted and very quiet
Reported by: Olev Hannula, hannula at gmail.com
Tested by: Olev Hannula, hannula at gmail.com
Stanislav Belansky, stanislav at icmail.ru
- fix: Terratec PHASE 22 codec is power-off due to wrong init data
Reported by: Philipp Ost, pj at smo.de
Tested by: Philipp Ost, pj at smo.de
+ SpicDS:
- fix: AK4381 produce hiss sound on 192kHz sample rate
- fix: stupid bug with volume control for AK4396

Submitted by: Konstantin Dimitrov <kosio.dimitrov@gmail.com>

show more ...

Bring in a bunch of bug fixes and some code to support more chipsets.
Neither me nor Ariff have access to any of this hardware, so all tests
have been made by Konstantin and Artem. Commit message mo

Bring in a bunch of bug fixes and some code to support more chipsets.
Neither me nor Ariff have access to any of this hardware, so all tests
have been made by Konstantin and Artem. Commit message mostly written
by Konstantin.

envy24:
- Add test code to support rear line-in input on 'Terratec DMX 6fire'
audio card. This code is also intended to be used in the future for
support of cards, that have I2C-to-GPIO expanders wired between the
control line of the audio codec and the Envy24, however such cards
are too complex and i can't add that support without hardware sample
of such board, i've already tried and failed.

envy24ht:
- Add support for 'AudioTrak Prodigy HD2'.
- Add support for 'AudioTrak Prodigy 7.1 XT'.
- Add support for 'ESI Juli@' (Works ok, DAC volume is hard-coded for
the time being, so 'mixer vol ...' doesn't work, only 'mixer pcm
...' works). [1]
- Fix bug in the init data for M-Audio Revolution 5.1, that
results in distorted sound.
- Add software volume control (now 'mixer pcm' works, thanks to Ariff).
- Add support for more samples rates - 176.4kHz and 192kHz.
- Fix problem with the 192kHz samples rate playback when 24.576MHz
crystal is used on the board instead of 49.152MHz crystal.

spicds:
- Add support for Asahi Kasei flagship DAC - AK4396 (used in AudioTrak
Prodigy HD2).

Submitted by: Konstantin Dimitrov <kosio.dimitrov@gmail.com>
Tested by: Artem Antonov [1]
Reviewed by: ariff

show more ...

Fix compilation for statically linked snd_envy24{ht}/spicds. Use explicit
struct mtx rather than void pointer.

PR: kern/109147

After repo copy from ak452x.[ch]: SPIcds is the I2S SPI audio codec code
used by the Envy* drivers.

Submitted by: "Konstantin Dimitrov" <kosio.dimitrov@gmail.com>

- fix compatibility with newer versions of FreeBSD
- fix all warnings during compilation
- fix obvious bugs
- add support for more cards

Now supported:
- M-Audio Delta Dio 2496
- M-Audio Audiophil

- fix compatibility with newer versions of FreeBSD
- fix all warnings during compilation
- fix obvious bugs
- add support for more cards

Now supported:
- M-Audio Delta Dio 2496
- M-Audio Audiophile 2496
- Terratec DMX 6fire

Known bugs (detected by Nokolas and Stefan):
- $ kldunload snd_ak452x.ko
Warning: memory type ak452x leaked memory on destroy (1 allocations,
64 bytes leaked).
- No sound in KDE: Everything works fine at the console but when I load KDE
(3.5.3) the sound stutters and plays at less then 1/2 speed.
- 'mixer: WRITE_MIXER: Device not configured' The message repeats x
times at system startup, x = whatever hw.snd.maxautovchans is set to.
(this is because only vol, pcm and line are supported, but the driver
shows more than those mixer devices and setting those additional mixers
results in this error message)
- vchans don't work
- 24 bit playback not supported (only 16/32 bit)
- after kld(un)loading some times, the card fails to be probed until reboot

Datasheets are available from:
http://www.nbritton.org/uploads/envy24/
http://www.asahi-kasei.co.jp/akm/en/product/ak4528/ak4528_f01e.pdf
http://www.asahi-kasei.co.jp/akm/en/product/ak4528/ekd4528-01.pdf
http://www.asahi-kasei.co.jp/akm/en/product/ak4524/ak4524_f03e.pdf
http://www.asahi-kasei.co.jp/akm/en/product/ak4524/ekd4524.pdf
http://www.wolfson.co.uk/uploads/documents/en/WM8728.pdf
http://www.richtech.co.kr/down/richtek/RT9131.pdf
http://xkodi.svobodno.com/xkodi/space71.html
http://people.freebsd.org/~lofi/envy24.pdf
http://people.freebsd.org/~lofi/4524.pdf

Submitted by: Konstantin Dimitrov <kosio.dimitrov@gmail.com>
Tested by: Nikolas Britton <nikolas.britton@gmail.com>
Stefan Ehmann <shoesoft@gmx.net>

show more ...

dd the envy24 driver as is to the tree. It's not connected to the build
yet. More commits to follow.

I got no response from the author, but since the driver is BSD licensed
I don't think he will com

dd the envy24 driver as is to the tree. It's not connected to the build
yet. More commits to follow.

I got no response from the author, but since the driver is BSD licensed
I don't think he will complain. :-)

I got it from http://people.freebsd.org/~lofi/envy24.tar.gz

Written by: Katsurajima Naoto <raven@katsurajima.seya.yokohama.jp>

show more ...

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Partially fix indentation issues to improve readability helping cooperation with
Dragonfly folks

PR: 194785
Submitted by: François Tigeot (ftigeot@wolfpond.org)

Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.

This means that their use is restricted to a single C file.

Fix a brain-o: wrong case statement semantics.

Found with: clang

Start copyright notices with /*-

Sound Mega-commit. Expect further cleanup until code freeze.

For a slightly thorough explaination, please refer to
[1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html .

Summary of changes includ

Sound Mega-commit. Expect further cleanup until code freeze.

For a slightly thorough explaination, please refer to
[1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html .

Summary of changes includes:

1 Volume Per-Channel (vpc). Provides private / standalone volume control
unique per-stream pcm channel without touching master volume / pcm.
Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for
backwards compatibility, SOUND_MIXER_PCM through the opened dsp device
instead of /dev/mixer. Special "bypass" mode is enabled through
/dev/mixer which will automatically detect if the adjustment is made
through /dev/mixer and forward its request to this private volume
controller. Changes to this volume object will not interfere with
other channels.

Requirements:
- SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which
require specific application modifications (preferred).
- No modifications required for using bypass mode, so applications
like mplayer or xmms should work out of the box.

Kernel hints:
- hint.pcm.%d.vpc (0 = disable vpc).

Kernel sysctls:
- hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer
bypass mode.
- hw.snd.vpc_autoreset (default: 1). By default, closing/opening
/dev/dsp will reset the volume back to 0 db gain/attenuation.
Setting this to 0 will preserve its settings across device
closing/opening.
- hw.snd.vpc_reset (default: 0). Panic/reset button to reset all
volume settings back to 0 db.
- hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value.

2 High quality fixed-point Bandlimited SINC sampling rate converter,
based on Julius O'Smith's Digital Audio Resampling -
http://ccrma.stanford.edu/~jos/resample/. It includes a filter design
script written in awk (the clumsiest joke I've ever written)
- 100% 32bit fixed-point, 64bit accumulator.
- Possibly among the fastest (if not fastest) of its kind.
- Resampling quality is tunable, either runtime or during kernel
compilation (FEEDER_RATE_PRESETS).
- Quality can be further customized during kernel compilation by
defining FEEDER_RATE_PRESETS in /etc/make.conf.

Kernel sysctls:
- hw.snd.feeder_rate_quality.
0 - Zero-order Hold (ZOH). Fastest, bad quality.
1 - Linear Interpolation (LINEAR). Slightly slower than ZOH,
better quality but still does not eliminate aliasing.
2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC
quality always start from 2 and above.

Rough quality comparisons:
- http://people.freebsd.org/~ariff/z_comparison/

3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be
directly fed into the hardware.

4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can
be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf.

5 Transparent/Adaptive Virtual Channel. Now you don't have to disable
vchans in order to make digital format pass through. It also makes
vchans more dynamic by choosing a better format/rate among all the
concurrent streams, which means that dev.pcm.X.play.vchanformat/rate
becomes sort of optional.

6 Exclusive Stream, with special open() mode O_EXCL. This will "mute"
other concurrent vchan streams and only allow a single channel with
O_EXCL set to keep producing sound.

Other Changes:
* most feeder_* stuffs are compilable in userland. Let's not
speculate whether we should go all out for it (save that for
FreeBSD 16.0-RELEASE).
* kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org>
* pull out channel mixing logic out of vchan.c and create its own
feeder_mixer for world justice.
* various refactoring here and there, for good or bad.
* activation of few more OSSv4 ioctls() (see [1] above).
* opt_snd.h for possible compile time configuration:
(mostly for debugging purposes, don't try these at home)
SND_DEBUG
SND_DIAGNOSTIC
SND_FEEDER_MULTIFORMAT
SND_FEEDER_FULL_MULTIFORMAT
SND_FEEDER_RATE_HP
SND_PCM_64
SND_OLDSTEREO

Manual page updates are on the way.

Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many
unsung / unnamed heroes.

show more ...

All open fixes and improvements from Konstantin for which users had to
use patches so far:
+ Envy24:
- fix: broken init data for M Audio Delta DiO 2496
- add: support for M Audio Delta 44
-

All open fixes and improvements from Konstantin for which users had to
use patches so far:
+ Envy24:
- fix: broken init data for M Audio Delta DiO 2496
- add: support for M Audio Delta 44
- add: support for M Audio Delta 1010LT
Tested by: Dominique Goncalves, dominique.goncalves at gmail.com
- add: support for Terratec EWX 2496
Tested by: Stefan Sperling, stsp at stsp.name
- add: support for M Audio Delta 66
Tested by: Richard Bown, richard.bown at blueyonder.co.uk
- add: support for M Audio Delta 1010
Tested by: Andrew Reilly, areilly at bigpond.net.au
+ Envy24HT:
- add: support for Terrasoniq TS22PCI
- fix: M-Audio Revolution 5.1 sound volume is very low
Reported by: Oliver Hartmann, ohartman at zedat.fu-berlin.de
Andrey Slusar, anrays at gmail.com
Tested by: Andrey Slusar, anrays at gmail.com
Rusu Silviu, arol.the at gmail.com
- fix: M-Audio Revolution 7.1 sound is distorted and very quiet
Reported by: Olev Hannula, hannula at gmail.com
Tested by: Olev Hannula, hannula at gmail.com
Stanislav Belansky, stanislav at icmail.ru
- fix: Terratec PHASE 22 codec is power-off due to wrong init data
Reported by: Philipp Ost, pj at smo.de
Tested by: Philipp Ost, pj at smo.de
+ SpicDS:
- fix: AK4381 produce hiss sound on 192kHz sample rate
- fix: stupid bug with volume control for AK4396

Submitted by: Konstantin Dimitrov <kosio.dimitrov@gmail.com>

show more ...

Bring in a bunch of bug fixes and some code to support more chipsets.
Neither me nor Ariff have access to any of this hardware, so all tests
have been made by Konstantin and Artem. Commit message mo

Bring in a bunch of bug fixes and some code to support more chipsets.
Neither me nor Ariff have access to any of this hardware, so all tests
have been made by Konstantin and Artem. Commit message mostly written
by Konstantin.

envy24:
- Add test code to support rear line-in input on 'Terratec DMX 6fire'
audio card. This code is also intended to be used in the future for
support of cards, that have I2C-to-GPIO expanders wired between the
control line of the audio codec and the Envy24, however such cards
are too complex and i can't add that support without hardware sample
of such board, i've already tried and failed.

envy24ht:
- Add support for 'AudioTrak Prodigy HD2'.
- Add support for 'AudioTrak Prodigy 7.1 XT'.
- Add support for 'ESI Juli@' (Works ok, DAC volume is hard-coded for
the time being, so 'mixer vol ...' doesn't work, only 'mixer pcm
...' works). [1]
- Fix bug in the init data for M-Audio Revolution 5.1, that
results in distorted sound.
- Add software volume control (now 'mixer pcm' works, thanks to Ariff).
- Add support for more samples rates - 176.4kHz and 192kHz.
- Fix problem with the 192kHz samples rate playback when 24.576MHz
crystal is used on the board instead of 49.152MHz crystal.

spicds:
- Add support for Asahi Kasei flagship DAC - AK4396 (used in AudioTrak
Prodigy HD2).

Submitted by: Konstantin Dimitrov <kosio.dimitrov@gmail.com>
Tested by: Artem Antonov [1]
Reviewed by: ariff

show more ...