Merge MPC85XX and QorIQ config options

Summary:
MPC85XX and QorIQ are very similar. When the DPAA dTSEC driver was
added, QORIQ_DPAA was brought in as a config option to support the differences
in

Merge MPC85XX and QorIQ config options

Summary:
MPC85XX and QorIQ are very similar. When the DPAA dTSEC driver was
added, QORIQ_DPAA was brought in as a config option to support the differences
in hardware register settings between QorIQ (e500mc-, e5500- based) SoCs and
QUICC (e500v1/e500v2-based) SoCs, particularly in the Local Access Window (LAW)
target settings.

Unify these settings using macros to hide details and ease porting, and use a
new function (mpc85xx_is_qoriq()) to distinguish between QorIQ and QUICC SoCs at
runtime.

An alternative to using the function could be to use a variable initialized at
platform attach time, which may incur less overhead at runtime. Since it's not
in the critical path once booted, this optimization doesn't seem necessary at
first pass.

Reviewed by: nwhitehorn
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D7294

show more ...

Make netbooting work again by disabling BOOTP_NFSV3. Investigate why this
causes bad RPC errors later.

In kernel config files, it is supposed to be 'options<space><tab>' not
'options<tab><tab>', per long standing (but recently not so strictly
enforced) convention.

Switch default Book-E scheduler to ULE, which works now, and enable
CAPABILITIES stuff required to make ssh work.

Hopefully, Book-E can eventually be added to GENERIC, which would avoid
this kind of

Switch default Book-E scheduler to ULE, which works now, and enable
CAPABILITIES stuff required to make ssh work.

Hopefully, Book-E can eventually be added to GENERIC, which would avoid
this kind of issue with bitrot. That will require figuring out how to link
Book-E and AIM kernels at the same address, however...

show more ...

Back out r253779 & r253786.

Decouple yarrow from random(4) device.

* Make Yarrow an optional kernel component -- enabled by "YARROW_RNG" option.
The files sha2.c, hash.c, randomdev_soft.c and yarrow.c comprise yarrow.

* ran

Decouple yarrow from random(4) device.

* Make Yarrow an optional kernel component -- enabled by "YARROW_RNG" option.
The files sha2.c, hash.c, randomdev_soft.c and yarrow.c comprise yarrow.

* random(4) device doesn't really depend on rijndael-*. Yarrow, however, does.

* Add random_adaptors.[ch] which is basically a store of random_adaptor's.
random_adaptor is basically an adapter that plugs in to random(4).
random_adaptor can only be plugged in to random(4) very early in bootup.
Unplugging random_adaptor from random(4) is not supported, and is probably a
bad idea anyway, due to potential loss of entropy pools.
We currently have 3 random_adaptors:
+ yarrow
+ rdrand (ivy.c)
+ nehemeiah

* Remove platform dependent logic from probe.c, and move it into
corresponding registration routines of each random_adaptor provider.
probe.c doesn't do anything other than picking a specific random_adaptor
from a list of registered ones.

* If the kernel doesn't have any random_adaptor adapters present then the
creation of /dev/random is postponed until next random_adaptor is kldload'ed.

* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a
system wide one.

Submitted by: arthurmesh@gmail.com, obrien
Obtained from: Juniper Networks
Reviewed by: obrien

show more ...

Remove all legacy ATA code parts, not used since options ATA_CAM enabled in
most kernels before FreeBSD 9.0. Remove such modules and respective kernel
options: atadisk, ataraid, atapicd, atapifd, at

Remove all legacy ATA code parts, not used since options ATA_CAM enabled in
most kernels before FreeBSD 9.0. Remove such modules and respective kernel
options: atadisk, ataraid, atapicd, atapifd, atapist, atapicam. Remove the
atacontrol utility and some man pages. Remove useless now options ATA_CAM.

No objections: current@, stable@
MFC after: never

show more ...

Let us manage differences of Book-E PowerPC variations i.e. vendor /
implementation specific vs. the common architecture definition.

Bring PPC4XX defines (PSL, SPR, TLB). Note the new definitions un

Let us manage differences of Book-E PowerPC variations i.e. vendor /
implementation specific vs. the common architecture definition.

Bring PPC4XX defines (PSL, SPR, TLB). Note the new definitions under
BOOKE_PPC4XX are not used in the code yet.

This change set is not supposed to affect existing E500 support, it's just
another reorg step before bringing support for E500mc, E5500 and PPC465.

Obtained from: AppliedMicro, Freescale, Semihalf

show more ...

Remove pty(4) from our kernel configurations.

As of FreeBSD 8, this driver should not be used. Applications that use
posix_openpt(2) and openpty(3) use the pts(4) that is built into the
kernel uncon

Remove pty(4) from our kernel configurations.

As of FreeBSD 8, this driver should not be used. Applications that use
posix_openpt(2) and openpty(3) use the pts(4) that is built into the
kernel unconditionally. If it turns out high profile depend on the
pty(4) module anyway, I'd rather get those fixed. So please report any
issues to me.

The pty(4) module is still available as a kernel module of course, so a
simple `kldload pty' can be used to run old-style pseudo-terminals.

show more ...

Apply r221124 to Book-E: switch to the new NFS client.

Approved by: re (blanket)

Switch the GENERIC kernels for all architectures to the new CAM-based ATA
stack. It means that all legacy ATA drivers are disabled and replaced by
respective CAM drivers. If you are using ATA device

Switch the GENERIC kernels for all architectures to the new CAM-based ATA
stack. It means that all legacy ATA drivers are disabled and replaced by
respective CAM drivers. If you are using ATA device names in /etc/fstab or
other places, make sure to update them respectively (adX -> adaY,
acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential
numbers for each type in order of detection, unless configured otherwise
with tunables, see cam(4)).

ataraid(4) functionality is now supported by the RAID GEOM class.
To use it you can load geom_raid kernel module and use graid(8) tool
for management. Instead of /dev/arX device names, use /dev/raid/rX.

show more ...

MFC r207077

Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had
the illusion of a tunable setting but was always turned on regardless.

MFppc64:

Kernel sources for 64-bit PowerPC, along with build-system changes to keep
32-bit kernels compiling (build system changes for 64-bit kernels are
coming later). Existing 32-bit PowerPC kerne

MFppc64:

Kernel sources for 64-bit PowerPC, along with build-system changes to keep
32-bit kernels compiling (build system changes for 64-bit kernels are
coming later). Existing 32-bit PowerPC kernel configurations must be
updated after this change to specify their architecture.

show more ...

Convert Freescale PowerPC platforms to FDT convention.

The following systems are affected:

- MPC8555CDS
- MPC8572DS

This overhaul covers the following major changes:

- All integrated periph

Convert Freescale PowerPC platforms to FDT convention.

The following systems are affected:

- MPC8555CDS
- MPC8572DS

This overhaul covers the following major changes:

- All integrated peripherals drivers for Freescale MPC85XX SoC, which are
currently in the FreeBSD source tree are reworked and adjusted so they
derive config data out of the device tree blob (instead of hard coded /
tabelarized values).

- This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC,
QUICC, UART, CFI.

- Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire
ocpbus(4) driver, which was based on hard-coded config data.

Note that world for these platforms has to be built WITH_FDT.

Reviewed by: imp
Sponsored by: The FreeBSD Foundation

show more ...

Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had
the illusion of a tunable setting but was always turned on regardless.

MFC after: 1 week

Adjust style (following the already existing rules) for the newly
introduced option DEADLKRES.

Reported by: danfe, julian, avg

Add the options DEADLKRES (introducing the deadlock resolver thread) in
the 'debugging' section of any HEAD kernel and enable for the mainstream
ones, excluding the embedded architectures.
It may, of

Add the options DEADLKRES (introducing the deadlock resolver thread) in
the 'debugging' section of any HEAD kernel and enable for the mainstream
ones, excluding the embedded architectures.
It may, of course, enabled on a case-by-case basis.

Sponsored by: Sandvine Incorporated
Requested by: emaste
Discussed with: kib

show more ...

Include SMP support in the MPC85XX kernel by default.

DS1553 RTC module driver. On the MPC8555CDS system it hangs off of the LBC bus.

Obtained from: Semihalf

Integrated I2C controller driver (found in MPC85xx and other SOC parts).

Obtained from: Freescale, Semihalf

Initial version of the sec(4) driver for the integrated security engine found
in Freescale system-on-chip devices.

The following algorithms and schemes are currently supported:
- 3DES, AES, DES

Initial version of the sec(4) driver for the integrated security engine found
in Freescale system-on-chip devices.

The following algorithms and schemes are currently supported:
- 3DES, AES, DES
- MD5, SHA1, SHA256, SHA384, SHA512

Reviewed by: philip
Obtained from: Freescale, Semihalf

show more ...

- Use "device\t" and "options \t" for consistency.

Add suppport for ISA and ISA interrupts to make the ATA
controller in the VIA southbridge functional in the CDS
(Configurable Development System) for MPC85XX.
The embedded USB controllers look operat

Add suppport for ISA and ISA interrupts to make the ATA
controller in the VIA southbridge functional in the CDS
(Configurable Development System) for MPC85XX.
The embedded USB controllers look operational but the
interrupt steering is still wrong.

show more ...

Change over the usb kernel options to the new stack (retaining existing
naming). The old usb stack can be compiled in my prefixing the name with 'o'.

Additional features for the tsec(4) Ethernet driver.

- interrupt coalescing
- polling
- jumbo frames
- multicast
- VLAN tagging

The enhanced version of the chip (eTSEC) can also take adva

Additional features for the tsec(4) Ethernet driver.

- interrupt coalescing
- polling
- jumbo frames
- multicast
- VLAN tagging

The enhanced version of the chip (eTSEC) can also take advantage of:

- TCP/IP checksum calculation h/w offloading

Obtained from: Freescale, Semihalf

show more ...