Fix type mismatches for malloc(3) and Co.

This is rather pedantic, as for most architectures it holds that
sizeof(type *) == sizeof(type **)

Found by: clang static analyzer
Reviewed by: ed
Differen

Fix type mismatches for malloc(3) and Co.

This is rather pedantic, as for most architectures it holds that
sizeof(type *) == sizeof(type **)

Found by: clang static analyzer
Reviewed by: ed
Differential Revision: https://reviews.freebsd.org/D4722

show more ...

When mountd is creating sockets, it iterates over all addresses specified
in the "hosts" array and eventually looks up the network address with
getaddrinfo(). At one point it checks for a numeric add

When mountd is creating sockets, it iterates over all addresses specified
in the "hosts" array and eventually looks up the network address with
getaddrinfo(). At one point it checks for a numeric address and if it
sees one, it sets a hint parameter to force getaddrinfo to interpret the
host as a numeric address. However that hint is not cleared for subsequent
iterations of the loop and if any hosts seen after this point are host names,
getaddrinfo will fail on the name. The result of this bug is that you cannot
pass a host name to the -h flag.

Unfortunately, the first iteration will either process ::1 or 127.0.0.1,
so the flag is set on the first iteration and all host names will fail
to be processed.

The same bug applies to rpc.lockd and rpc.statd, so fix them too.

Differential Revision: https://reviews.freebsd.org/D1507
Reported by: Dylan Martin
MFC after: 1 week
Sponsored by: Sandvine Inc.

show more ...

Make a copy instead using constant string directly when assigning to char *.

While I'm there also remove a few prototypes that are unused.

Fix the nfs related daemons so that they don't intermittently
fail with "bind: address already in use". This problem was reported
to the freebsd-stable@ mailing list on Feb. 19 under the subject
head

Fix the nfs related daemons so that they don't intermittently
fail with "bind: address already in use". This problem was reported
to the freebsd-stable@ mailing list on Feb. 19 under the subject
heading "statd/lockd startup failure" by george+freebsd at m5p dot com.
The problem is that the first combination of {udp,tcp X ipv4,ipv6}
would select a port# dynamically, but one of the other three combinations
would have that port# already in use. The patch is somewhat involved
because it was requested by dougb@ that the four combinations use the
same port# wherever possible. The patch splits the create_service()
function into two functions. The first goes as far as bind(2) in a
loop for up to GETPORT_MAXTRY - 1 times, attempting to use the same port#
for all four cases. If these attempts fail, the last attempt allows
the 4 cases to use different port #s. After this function has succeeded,
the second function, called complete_service(), does the rest of what
create_service() did.
The three daemons mountd, rpc.lockd and rpc.statd all have a
create_service() function that is patched in a similar way. However,
create_service() has non-trivial differences for the three daemons
that made it impractical to share the same functions between them.

Reviewed by: jhb
MFC after: 2 weeks

show more ...

rpc.lockd(8) WARNS cleanup

- Provide function prototype for nlm_syscall
- Don't assign a variable from the stack to a global var[1]
- Remove unused vars

Found by: clang static analyser [1]
Reviewed

rpc.lockd(8) WARNS cleanup

- Provide function prototype for nlm_syscall
- Don't assign a variable from the stack to a global var[1]
- Remove unused vars

Found by: clang static analyser [1]
Reviewed by: dfr

show more ...

Re-implement the client side of rpc.lockd in the kernel. This implementation
provides the correct semantics for flock(2) style locks which are used by the
lockf(1) command line tool and the pidfile(3

Re-implement the client side of rpc.lockd in the kernel. This implementation
provides the correct semantics for flock(2) style locks which are used by the
lockf(1) command line tool and the pidfile(3) library. It also implements
recovery from server restarts and ensures that dirty cache blocks are written
to the server before obtaining locks (allowing multiple clients to use file
locking to safely share data).

Sponsored by: Isilon Systems
PR: 94256
MFC after: 2 weeks

show more ...

Add a missing call to init_nsm().

MFC after: 1 week

If we can't find or load the kernel NLM support, don't just go ahead and
try to use it anyway.

Call listen(2) on bound tcp sockets before passing them to svc_tli_create.

Remove the '-k' option.

Add kernel module support for nfslockd and krpc. Use the module system
to detect (or load) kernel NLM support in rpc.lockd. Remove the '-k'
option to rpc.lockd and make kernel NLM the default. A user

Add kernel module support for nfslockd and krpc. Use the module system
to detect (or load) kernel NLM support in rpc.lockd. Remove the '-k'
option to rpc.lockd and make kernel NLM the default. A user can still
force the use of the old user NLM by building a kernel without NFSLOCKD
and/or removing the nfslockd.ko module.

show more ...

Add the new kernel-mode NFS Lock Manager. To use it instead of the
user-mode lock manager, build a kernel with the NFSLOCKD option and
add '-k' to 'rpc_lockd_flags' in rc.conf.

Highlights include:

Add the new kernel-mode NFS Lock Manager. To use it instead of the
user-mode lock manager, build a kernel with the NFSLOCKD option and
add '-k' to 'rpc_lockd_flags' in rc.conf.

Highlights include:

* Thread-safe kernel RPC client - many threads can use the same RPC
client handle safely with replies being de-multiplexed at the socket
upcall (typically driven directly by the NIC interrupt) and handed
off to whichever thread matches the reply. For UDP sockets, many RPC
clients can share the same socket. This allows the use of a single
privileged UDP port number to talk to an arbitrary number of remote
hosts.

* Single-threaded kernel RPC server. Adding support for multi-threaded
server would be relatively straightforward and would follow
approximately the Solaris KPI. A single thread should be sufficient
for the NLM since it should rarely block in normal operation.

* Kernel mode NLM server supporting cancel requests and granted
callbacks. I've tested the NLM server reasonably extensively - it
passes both my own tests and the NFS Connectathon locking tests
running on Solaris, Mac OS X and Ubuntu Linux.

* Userland NLM client supported. While the NLM server doesn't have
support for the local NFS client's locking needs, it does have to
field async replies and granted callbacks from remote NLMs that the
local client has contacted. We relay these replies to the userland
rpc.lockd over a local domain RPC socket.

* Robust deadlock detection for the local lock manager. In particular
it will detect deadlocks caused by a lock request that covers more
than one blocking request. As required by the NLM protocol, all
deadlock detection happens synchronously - a user is guaranteed that
if a lock request isn't rejected immediately, the lock will
eventually be granted. The old system allowed for a 'deferred
deadlock' condition where a blocked lock request could wake up and
find that some other deadlock-causing lock owner had beaten them to
the lock.

* Since both local and remote locks are managed by the same kernel
locking code, local and remote processes can safely use file locks
for mutual exclusion. Local processes have no fairness advantage
compared to remote processes when contending to lock a region that
has just been unlocked - the local lock manager enforces a strict
first-come first-served model for both local and remote lockers.

Sponsored by: Isilon Systems
PR: 95247 107555 115524 116679
MFC after: 2 weeks

show more ...

Check the correct variables for malloc failures.

Submitted by: Michiel Boland <michiel@boland.org>

Add the -h <bindip> option to rpc.lockd, similar to the one in
nfsd(8), in mountd(8), and in rpc.statd(8)

-h bindip
Specify specific IP addresses to bind to for TCP and UDP requests.
This option may

Add the -h <bindip> option to rpc.lockd, similar to the one in
nfsd(8), in mountd(8), and in rpc.statd(8)

-h bindip
Specify specific IP addresses to bind to for TCP and UDP requests.
This option may be specified multiple times. If no -h option is
specified, rpc.lockd will bind to INADDR_ANY. Note that when specifying
IP addresses with -h, rpc.lockd will automatically add 127.0.0.1 and
if IPv6 is enabled, ::1 to the list.

PR: bin/98500
MFC after: 1 week

show more ...

Add the "-p" option, which allows to specify a port which the daemon
should bind to.

PR: bin/100969
Reviewed by: alfred@
MFC after: 1 week

Set alarm timer for grace period from the grace_period variable, instead
of hard-coding a value of 10 seconds. Command line flag -g is thus now
correctly taken into account.

PR: bin/102176
MFC afte

Set alarm timer for grace period from the grace_period variable, instead
of hard-coding a value of 10 seconds. Command line flag -g is thus now
correctly taken into account.

PR: bin/102176
MFC after: 1 week

show more ...

After talking to Colin,
apply the patch of bin/61718 (which should include/elimatate kern/61122 also).
It seems to fix a few annoying bugs.

PR: bin/61718, kern/61122
Submitted by: bg@sics.se ohartm

After talking to Colin,
apply the patch of bin/61718 (which should include/elimatate kern/61122 also).
It seems to fix a few annoying bugs.

PR: bin/61718, kern/61122
Submitted by: bg@sics.se ohartman@mail.physik.uni-mainz.de

show more ...

Make this compile cleanly. It passes WARNS=2, but I haven't checked
it is so on more platforms.

init_nsm() is executed after a call to daemon(*, 0), so error and
warning messages should be logged rather than sent to /dev/null.

PR: bin/45461

Implement nonblocking tpc-connections. rpcgen -m does still
produce backcompatible code.

Reviewed by: rwatson
Obtained from: NetBSD
MFC after: 1 day

When binding to transports if getnetconfigent() fails then actually
print out the correct transport it failed on rather than always
spitting out 'udp', also call nc_sperror() to give a more verbose
e

When binding to transports if getnetconfigent() fails then actually
print out the correct transport it failed on rather than always
spitting out 'udp', also call nc_sperror() to give a more verbose
error message detailing the problem.

show more ...

Use char foo[] = "BAR" to avoid direct assignment of const char * into char *.
rpcgen can't really make those fields const because the remote side might
want to munge them, so we need to pass non-con

Use char foo[] = "BAR" to avoid direct assignment of const char * into char *.
rpcgen can't really make those fields const because the remote side might
want to munge them, so we need to pass non-const in. Hackish, but should
work.

show more ...

Remove main() prototype.

Remove __P.

Bring in Andrew P. Lentvorski initial work on making lockd work,
this should get us closer so cleaner implementation.

Submitted by: Andrew P. Lentvorski <bsder@allcaps.org>