#
4f2c765b |
| 30-Aug-2023 |
Marc-André Lureau <marcandre.lureau@redhat.com> |
ui/qmp: move screendump to ui-qmp-cmds.c
console.c unit is over-crowded. This code is specific to the handling of the QMP screendump command, so move it in ui-qmp-cmds.
Signed-off-by: Marc-André Lu
ui/qmp: move screendump to ui-qmp-cmds.c
console.c unit is over-crowded. This code is specific to the handling of the QMP screendump command, so move it in ui-qmp-cmds.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20230830093843.3531473-4-marcandre.lureau@redhat.com>
show more ...
|
Revision tags: v8.1.0, v8.1.0-rc4, v8.1.0-rc3, v7.2.5, v8.0.4, v8.1.0-rc2, v8.1.0-rc1, v8.1.0-rc0 |
|
#
9ac06df8 |
| 13-Jul-2023 |
Dongwon Kim <dongwon.kim@intel.com> |
virtio-gpu-udmabuf: correct naming of QemuDmaBuf size properties
Replace 'width' and 'height' in QemuDmaBuf with 'backing_widht' and 'backing_height' as these commonly indicate the size of the whole
virtio-gpu-udmabuf: correct naming of QemuDmaBuf size properties
Replace 'width' and 'height' in QemuDmaBuf with 'backing_widht' and 'backing_height' as these commonly indicate the size of the whole surface (e.g. guest's Xorg extended display). Then use 'width' and 'height' for sub region in there (e.g. guest's scanouts).
Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Dongwon Kim <dongwon.kim@intel.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-ID: <20230713040444.32267-1-dongwon.kim@intel.com>
show more ...
|
Revision tags: v8.1.0, v8.1.0-rc4, v8.1.0-rc3, v7.2.5, v8.0.4, v8.1.0-rc2, v8.1.0-rc1, v8.1.0-rc0 |
|
#
9ac06df8 |
| 13-Jul-2023 |
Dongwon Kim <dongwon.kim@intel.com> |
virtio-gpu-udmabuf: correct naming of QemuDmaBuf size properties
Replace 'width' and 'height' in QemuDmaBuf with 'backing_widht' and 'backing_height' as these commonly indicate the size of the whole
virtio-gpu-udmabuf: correct naming of QemuDmaBuf size properties
Replace 'width' and 'height' in QemuDmaBuf with 'backing_widht' and 'backing_height' as these commonly indicate the size of the whole surface (e.g. guest's Xorg extended display). Then use 'width' and 'height' for sub region in there (e.g. guest's scanouts).
Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Dongwon Kim <dongwon.kim@intel.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-ID: <20230713040444.32267-1-dongwon.kim@intel.com>
show more ...
|
Revision tags: v8.1.0, v8.1.0-rc4, v8.1.0-rc3, v7.2.5, v8.0.4, v8.1.0-rc2, v8.1.0-rc1, v8.1.0-rc0 |
|
#
9ac06df8 |
| 13-Jul-2023 |
Dongwon Kim <dongwon.kim@intel.com> |
virtio-gpu-udmabuf: correct naming of QemuDmaBuf size properties
Replace 'width' and 'height' in QemuDmaBuf with 'backing_widht' and 'backing_height' as these commonly indicate the size of the whole
virtio-gpu-udmabuf: correct naming of QemuDmaBuf size properties
Replace 'width' and 'height' in QemuDmaBuf with 'backing_widht' and 'backing_height' as these commonly indicate the size of the whole surface (e.g. guest's Xorg extended display). Then use 'width' and 'height' for sub region in there (e.g. guest's scanouts).
Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Dongwon Kim <dongwon.kim@intel.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-ID: <20230713040444.32267-1-dongwon.kim@intel.com>
show more ...
|
Revision tags: v8.1.0, v8.1.0-rc4, v8.1.0-rc3, v7.2.5, v8.0.4, v8.1.0-rc2, v8.1.0-rc1, v8.1.0-rc0 |
|
#
9ac06df8 |
| 13-Jul-2023 |
Dongwon Kim <dongwon.kim@intel.com> |
virtio-gpu-udmabuf: correct naming of QemuDmaBuf size properties
Replace 'width' and 'height' in QemuDmaBuf with 'backing_widht' and 'backing_height' as these commonly indicate the size of the whole
virtio-gpu-udmabuf: correct naming of QemuDmaBuf size properties
Replace 'width' and 'height' in QemuDmaBuf with 'backing_widht' and 'backing_height' as these commonly indicate the size of the whole surface (e.g. guest's Xorg extended display). Then use 'width' and 'height' for sub region in there (e.g. guest's scanouts).
Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Dongwon Kim <dongwon.kim@intel.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-ID: <20230713040444.32267-1-dongwon.kim@intel.com>
show more ...
|
Revision tags: v8.0.3, v7.2.4 |
|
#
bf41ab61 |
| 06-Jun-2023 |
Marc-André Lureau <marcandre.lureau@redhat.com> |
ui: add optional d3d texture pointer to scanout texture
The following patch will get the underlying D3D11 Texture2D from the virgl renderer scanout. Pass it along to the texture scanout callbacks as
ui: add optional d3d texture pointer to scanout texture
The following patch will get the underlying D3D11 Texture2D from the virgl renderer scanout. Pass it along to the texture scanout callbacks as a priliminary step, to simplify review.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230606115658.677673-20-marcandre.lureau@redhat.com>
show more ...
|
#
09b4c198 |
| 06-Jun-2023 |
Marc-André Lureau <marcandre.lureau@redhat.com> |
console/win32: allocate shareable display surface
Introduce qemu_win32_map_alloc() and qemu_win32_map_free() to allocate shared memory mapping. The handle can be used to share the mapping with anoth
console/win32: allocate shareable display surface
Introduce qemu_win32_map_alloc() and qemu_win32_map_free() to allocate shared memory mapping. The handle can be used to share the mapping with another process.
Teach qemu_create_displaysurface() to allocate shared memory. Following patches will introduce other places for shared memory allocation.
Other patches for -display dbus will share the memory when possible with the client, to avoid expensive memory copy between the processes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230606115658.677673-10-marcandre.lureau@redhat.com>
show more ...
|
#
b6596785 |
| 19-Jun-2023 |
Bilal Elmoussaoui <belmouss@redhat.com> |
ui/touch: Move event handling to a common helper
To share code between the GTK and DBus UI bakcends see the next commit for details
Signed-off-by: Bilal Elmoussaoui <belmouss@redhat.com> Reviewed-b
ui/touch: Move event handling to a common helper
To share code between the GTK and DBus UI bakcends see the next commit for details
Signed-off-by: Bilal Elmoussaoui <belmouss@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230619095337.9899-2-belmouss@redhat.com>
show more ...
|
Revision tags: v8.0.3, v7.2.4 |
|
#
bf41ab61 |
| 06-Jun-2023 |
Marc-André Lureau <marcandre.lureau@redhat.com> |
ui: add optional d3d texture pointer to scanout texture
The following patch will get the underlying D3D11 Texture2D from the virgl renderer scanout. Pass it along to the texture scanout callbacks as
ui: add optional d3d texture pointer to scanout texture
The following patch will get the underlying D3D11 Texture2D from the virgl renderer scanout. Pass it along to the texture scanout callbacks as a priliminary step, to simplify review.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230606115658.677673-20-marcandre.lureau@redhat.com>
show more ...
|
#
09b4c198 |
| 06-Jun-2023 |
Marc-André Lureau <marcandre.lureau@redhat.com> |
console/win32: allocate shareable display surface
Introduce qemu_win32_map_alloc() and qemu_win32_map_free() to allocate shared memory mapping. The handle can be used to share the mapping with anoth
console/win32: allocate shareable display surface
Introduce qemu_win32_map_alloc() and qemu_win32_map_free() to allocate shared memory mapping. The handle can be used to share the mapping with another process.
Teach qemu_create_displaysurface() to allocate shared memory. Following patches will introduce other places for shared memory allocation.
Other patches for -display dbus will share the memory when possible with the client, to avoid expensive memory copy between the processes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230606115658.677673-10-marcandre.lureau@redhat.com>
show more ...
|
#
b6596785 |
| 19-Jun-2023 |
Bilal Elmoussaoui <belmouss@redhat.com> |
ui/touch: Move event handling to a common helper
To share code between the GTK and DBus UI bakcends see the next commit for details
Signed-off-by: Bilal Elmoussaoui <belmouss@redhat.com> Reviewed-b
ui/touch: Move event handling to a common helper
To share code between the GTK and DBus UI bakcends see the next commit for details
Signed-off-by: Bilal Elmoussaoui <belmouss@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230619095337.9899-2-belmouss@redhat.com>
show more ...
|
Revision tags: v8.0.2, v8.0.1, v7.2.3 |
|
#
4c93ce54 |
| 23-May-2023 |
Mauro Matteo Cascella <mcascell@redhat.com> |
ui/cursor: make width/height unsigned 16-bit integer
Although not actually exploitable at the moment, a negative width/height could make datasize wrap around and potentially lead to buffer overflow.
ui/cursor: make width/height unsigned 16-bit integer
Although not actually exploitable at the moment, a negative width/height could make datasize wrap around and potentially lead to buffer overflow. Since there is no reason a negative width/height is ever appropriate, modify QEMUCursor struct and cursor_alloc prototype to accept uint16_t. This protects us against accidentally introducing future bugs.
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com> Reported-by: Jacek Halon <jacek.halon@gmail.com> Reported-by: Yair Mizrahi <yairh33@gmail.com> Reported-by: Elsayed El-Refa'ei <e.elrefaei99@gmail.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20230523163023.608121-1-mcascell@redhat.com>
show more ...
|
Revision tags: v8.0.2, v8.0.1, v7.2.3 |
|
#
4c93ce54 |
| 23-May-2023 |
Mauro Matteo Cascella <mcascell@redhat.com> |
ui/cursor: make width/height unsigned 16-bit integer
Although not actually exploitable at the moment, a negative width/height could make datasize wrap around and potentially lead to buffer overflow.
ui/cursor: make width/height unsigned 16-bit integer
Although not actually exploitable at the moment, a negative width/height could make datasize wrap around and potentially lead to buffer overflow. Since there is no reason a negative width/height is ever appropriate, modify QEMUCursor struct and cursor_alloc prototype to accept uint16_t. This protects us against accidentally introducing future bugs.
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com> Reported-by: Jacek Halon <jacek.halon@gmail.com> Reported-by: Yair Mizrahi <yairh33@gmail.com> Reported-by: Elsayed El-Refa'ei <e.elrefaei99@gmail.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20230523163023.608121-1-mcascell@redhat.com>
show more ...
|
Revision tags: v7.2.2, v8.0.0, v8.0.0-rc4, v8.0.0-rc3, v7.2.1, v8.0.0-rc2, v8.0.0-rc1, v8.0.0-rc0 |
|
#
385ac97f |
| 17-Jan-2023 |
Marc-André Lureau <marcandre.lureau@redhat.com> |
ui: keep current cursor with QemuConsole
Keeping the current cursor around is useful, not only for VNC, but for other displays. Let's move it down, see the following patches for other usages.
Signe
ui: keep current cursor with QemuConsole
Keeping the current cursor around is useful, not only for VNC, but for other displays. Let's move it down, see the following patches for other usages.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
show more ...
|
#
2512a026 |
| 17-Jan-2023 |
Marc-André Lureau <marcandre.lureau@redhat.com> |
ui: rename cursor_{get->ref}, return it
The naming is more conventional in QEMU code, and allows to simplify some code by changing the API design, so it returns the input parameter, instead of void.
ui: rename cursor_{get->ref}, return it
The naming is more conventional in QEMU code, and allows to simplify some code by changing the API design, so it returns the input parameter, instead of void.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
show more ...
|
#
f4579e28 |
| 17-Jan-2023 |
Marc-André Lureau <marcandre.lureau@redhat.com> |
ui: rename cursor_{put->unref}
The naming is more conventional in QEMU.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
#
5feed38c |
| 10-Feb-2023 |
Thomas Huth <thuth@redhat.com> |
Do not include "qemu/error-report.h" in headers that do not need it
Include it in the .c files instead that use the error reporting functions.
Message-Id: <20230210111931.1115489-1-thuth@redhat.com
Do not include "qemu/error-report.h" in headers that do not need it
Include it in the .c files instead that use the error reporting functions.
Message-Id: <20230210111931.1115489-1-thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
show more ...
|
#
5feed38c |
| 10-Feb-2023 |
Thomas Huth <thuth@redhat.com> |
Do not include "qemu/error-report.h" in headers that do not need it
Include it in the .c files instead that use the error reporting functions.
Message-Id: <20230210111931.1115489-1-thuth@redhat.com
Do not include "qemu/error-report.h" in headers that do not need it
Include it in the .c files instead that use the error reporting functions.
Message-Id: <20230210111931.1115489-1-thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
show more ...
|
#
ec843b97 |
| 09-Jan-2023 |
Markus Armbruster <armbru@redhat.com> |
ui: Split hmp_mouse_set() and move the HMP part to ui/
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230109190321.1056914-17-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Da
ui: Split hmp_mouse_set() and move the HMP part to ui/
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230109190321.1056914-17-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
show more ...
|
#
ec843b97 |
| 09-Jan-2023 |
Markus Armbruster <armbru@redhat.com> |
ui: Split hmp_mouse_set() and move the HMP part to ui/
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230109190321.1056914-17-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Da
ui: Split hmp_mouse_set() and move the HMP part to ui/
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230109190321.1056914-17-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
show more ...
|
#
ec843b97 |
| 09-Jan-2023 |
Markus Armbruster <armbru@redhat.com> |
ui: Split hmp_mouse_set() and move the HMP part to ui/
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230109190321.1056914-17-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Da
ui: Split hmp_mouse_set() and move the HMP part to ui/
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230109190321.1056914-17-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
show more ...
|
#
ec843b97 |
| 09-Jan-2023 |
Markus Armbruster <armbru@redhat.com> |
ui: Split hmp_mouse_set() and move the HMP part to ui/
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230109190321.1056914-17-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Da
ui: Split hmp_mouse_set() and move the HMP part to ui/
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230109190321.1056914-17-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
show more ...
|
Revision tags: v7.2.0, v7.2.0-rc4, v7.2.0-rc3, v7.2.0-rc2, v7.2.0-rc1, v7.2.0-rc0, v7.1.0, v7.1.0-rc4, v7.1.0-rc3 |
|
#
df6322a8 |
| 11-Aug-2022 |
Cal Peake <cp@absolutedigital.net> |
ui/console: Get tab completion working again in the SDL monitor vc
Define a QEMU special key constant for the tab key and add an entry for it in the qcode_to_keysym table. This allows tab completion
ui/console: Get tab completion working again in the SDL monitor vc
Define a QEMU special key constant for the tab key and add an entry for it in the qcode_to_keysym table. This allows tab completion to work again in the SDL monitor virtual console, which has been broken ever since the migration from SDL1 to SDL2.
Signed-off-by: Cal Peake <cp@absolutedigital.net> Message-Id: <7054816e-99c-7e2-6737-7cf98cc56e2@absolutedigital.net> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
show more ...
|
Revision tags: v7.2.0, v7.2.0-rc4, v7.2.0-rc3, v7.2.0-rc2, v7.2.0-rc1, v7.2.0-rc0, v7.1.0, v7.1.0-rc4, v7.1.0-rc3 |
|
#
df6322a8 |
| 11-Aug-2022 |
Cal Peake <cp@absolutedigital.net> |
ui/console: Get tab completion working again in the SDL monitor vc
Define a QEMU special key constant for the tab key and add an entry for it in the qcode_to_keysym table. This allows tab completion
ui/console: Get tab completion working again in the SDL monitor vc
Define a QEMU special key constant for the tab key and add an entry for it in the qcode_to_keysym table. This allows tab completion to work again in the SDL monitor virtual console, which has been broken ever since the migration from SDL1 to SDL2.
Signed-off-by: Cal Peake <cp@absolutedigital.net> Message-Id: <7054816e-99c-7e2-6737-7cf98cc56e2@absolutedigital.net> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
show more ...
|
Revision tags: v7.2.0, v7.2.0-rc4, v7.2.0-rc3, v7.2.0-rc2, v7.2.0-rc1, v7.2.0-rc0, v7.1.0, v7.1.0-rc4, v7.1.0-rc3 |
|
#
df6322a8 |
| 11-Aug-2022 |
Cal Peake <cp@absolutedigital.net> |
ui/console: Get tab completion working again in the SDL monitor vc
Define a QEMU special key constant for the tab key and add an entry for it in the qcode_to_keysym table. This allows tab completion
ui/console: Get tab completion working again in the SDL monitor vc
Define a QEMU special key constant for the tab key and add an entry for it in the qcode_to_keysym table. This allows tab completion to work again in the SDL monitor virtual console, which has been broken ever since the migration from SDL1 to SDL2.
Signed-off-by: Cal Peake <cp@absolutedigital.net> Message-Id: <7054816e-99c-7e2-6737-7cf98cc56e2@absolutedigital.net> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
show more ...
|