pseries: Update SLOF firmware image

This fixes PCI bridge regression.

Alexey Kardashevskiy (3):
ibm,client-architecture-support: Fix stack handling
fdt: Fix updating the tree at H_CAS

pseries: Update SLOF firmware image

This fixes PCI bridge regression.

Alexey Kardashevskiy (3):
ibm,client-architecture-support: Fix stack handling
fdt: Fix updating the tree at H_CAS
version: update to 20191209

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

pc-bios/s390: Update firmware image with the "fix sclp_get_loadparm_ascii" patch

This fixes various boot scenarios, e.g. the possibility to use
"-boot menu=on".

Signed-off-by: Thomas Huth <thuth@re

pc-bios/s390: Update firmware image with the "fix sclp_get_loadparm_ascii" patch

This fixes various boot scenarios, e.g. the possibility to use
"-boot menu=on".

Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

pc-bios/s390-ccw: fix sclp_get_loadparm_ascii

The existing s390 bios gets the LOADPARM information from the system using
an SCLP call that specifies a buffer length too small to contain all the
outp

pc-bios/s390-ccw: fix sclp_get_loadparm_ascii

The existing s390 bios gets the LOADPARM information from the system using
an SCLP call that specifies a buffer length too small to contain all the
output.

The recent fixes in the SCLP code have exposed this bug, since now the
SCLP call will return an error (as per architecture) instead of
writing partially and completing successfully.

The solution is simply to specify the full page length as the SCCB
length instead of a smaller size.

Fixes: 832be0d8a3bb ("s390x: sclp: Report insufficient SCCB length")
Fixes: 9a22473c70f3 ("pc-bios/s390-ccw: get LOADPARM stored in SCP Read Info")

Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <1574944437-31182-1-git-send-email-imbrenda@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

seabios: update to pre-1.13 snapshot again

Due to lchs support merge in upstream seabios gone wrong (applied v3
instead of v4) here is another seabios snapshot update with the
mis-merge fixed up, so

seabios: update to pre-1.13 snapshot again

Due to lchs support merge in upstream seabios gone wrong (applied v3
instead of v4) here is another seabios snapshot update with the
mis-merge fixed up, so lchs support should actually work in -rc2.

Also picked up two tpm bugfixes.

git shortlog from previous snapshot
===================================

Gerd Hoffmann (4):
Revert "geometry: Apply LCHS values for boot devices"
Revert "config: Add toggle for bootdevice information"
Revert "geometry: Add boot_lchs_find_*() utility functions"
Revert "geometry: Read LCHS from fw_cfg"

Sam Eiderman (4):
geometry: Read LCHS from fw_cfg
boot: Build ata and scsi paths in function
geometry: Add boot_lchs_find_*() utility functions
geometry: Apply LCHS values for boot devices

Stefan Berger (2):
tpm: Require a response to have minimum size of a valid response header
tcgbios: Check for enough bytes returned from TPM2_GetCapability

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

opensbi: Upgrade from v0.4 to v0.5

This release has:
Lot of critical fixes
Hypervisor extension support
SBI v0.2 base extension support
Debug prints support
Handle traps when doi

opensbi: Upgrade from v0.4 to v0.5

This release has:
Lot of critical fixes
Hypervisor extension support
SBI v0.2 base extension support
Debug prints support
Handle traps when doing unpriv load/store
Allow compiling without FP support
Use git describe to generate boot-time banner
Andes AE350 platform support

ShortLog:

Anup Patel (14):
platform: sifive/fu540: Move FDT further up
lib: Allow compiling without FP support
lib: Introduce sbi_dprintf() API
lib: Use sbi_dprintf() for invalid CSRs
lib: Handle traps when doing unpriv load/store in get_insn()
lib: Delegate supervisor ecall to HS-mode when H extension available
lib: Extend sbi_hart_switch_mode() to support hypervisor extension
lib: Extend sbi_trap_redirect() for hypervisor extension
lib: Redirect WFI trapped from VS/VU mode to HS-mode
include: Extend get_insn() to read instruction from VS/VU mode
lib: Emulate HTIMEDELTA CSR for platforms not having TIME CSR
Makefile: Minor fix in OPENSBI_VERSION_GIT
lib: Fix coldboot race condition observed on emulators/simulators
include: Bump-up version to 0.5

Atish Patra (16):
lib: Provide an atomic exchange function unsigned long
lib: Fix race conditions in tlb fifo access.
platform: Remove the ipi_sync method from all platforms.
lib: Fix timer for 32 bit
lib: Support atomic swap instructions
lib: Upgrade to full flush if size is at least threshold
docs: Update the fu540 platform guide as per U-Boot documents.
lib: Change tlb range flush threshold to 4k page instead of 1G
lib: provide a platform specific tlb range flush threshold
lib: Fix tlb flush range limit value
Test: Move test payload related code out of interface header
lib: Align error codes as per SBI specification.
lib: Rename existing SBI implementation as 0.1.
lib: Remove redundant variable assignment
lib: Implement SBI v0.2
lib: Provide a platform hook to implement vendor specific SBI extensions.

Bin Meng (6):
platform: sifive: fu540: Use standard value string for cpu node status
README: Document 32-bit / 64-bit images build
treewide: Use conventional names for 32-bit and 64-bit
platform: sifive: fu540: Expand FDT size before any patching
firmware: Use macro instead of magic number for boot status
docs: platform: Update descriptions for qemu/sifive_u support

Damien Le Moal (4):
kendryte/k210: Use sifive UART driver
kendryte/k210: remove sysctl code
README: Update license information
kendryte/k210: remove unused file

Georg Kotheimer (1):
utils: Use cpu_to_fdt32() when writing to fdt

Jacob Garber (4):
lib: Use bitwise & instead of boolean &&
lib: Use correct type for return value
lib: Prevent unintended sign extensions
lib: Correct null pointer check

Lukas Auer (1):
firmware: do not use relocated _boot_status before it is valid

Nylon Chen (3):
firmware: Fix the loop condition of _wait_relocate_copy_done section
platform: Add Andes AE350 initial support
scripts: Add AE350 to platform list in the binary archive script

Palmer Dabbelt (1):
Include `git describe` in OpenSBI

Zong Li (1):
Write MSIP by using memory-mapped control register

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>

show more ...

seabios: update to pre-1.13 snapshot

seabios 1.13 will be released later this month. This patch updates the
seabios submodule and binaries in qemu to a snapshot of git master.
That will increase th

seabios: update to pre-1.13 snapshot

seabios 1.13 will be released later this month. This patch updates the
seabios submodule and binaries in qemu to a snapshot of git master.
That will increase the test coverage of the upcoming seabios release and
will also make the number of changes smaller when we update to the final
1.13 release during qemu code freeze for 4.2.

v3: add ahci bugfix
v2: build binaries with gcc 4.8.5 instead of gcc 8.3.1 (rhel7).

git shortlog rel-1.12.1..
=========================

David Woodhouse (2):
csm: Sanitise alignment constraint in Legacy16GetTableAddress
csm: Fix boot priority translation

Denis Plotnikov (1):
virtio: extend virtio queue size to 256

Gerd Hoffmann (21):
vga: move modelist from bochsvga.c to new svgamodes.c
vga: make memcpy_high() public
vga: add atiext driver
vga: add ati bios tables
vbe: add edid support.
ati: add edid support.
bochsvga: add edid support.
bochsdisplay: add edid support.
bochsdisplay: parse resolution from edid.
add get_keystroke_full() helper
bootmenu: add support for more than 9 entries
optionrom: disallow int19 redirect for pnp roms.
ati-vga: make less verbose
ati-vga: fix ati_read()
ati-vga: make i2c register and bits configurable
ati-vga: try vga ddc first
ati-vga: add rage128 edid support
bochsdisplay: add copyright and license to bochsdisplay.c
ramfb: add copyright and license to ramfb.c
cp437: add license to cp437.c
ahci: zero-initialize port struct

Joseph Pacheco-Corwin (1):
bootsplash: Added support for 16/24/32bpp in one function

Kevin O'Connor (10):
output: Avoid thunking to 16bit mode in printf() if no vgabios
docs: Update mailing list archive links
docs: Fix cut-and-paste error in Mailinglist.md archive link
usb-ehci: Clear pipe token on pipe reallocate
pciinit: Use %pP shorthand for printing device ids in intel_igd_setup()
virtio-pci: Use %pP format in dprintf() calls
Makefile: Build with -Wno-address-of-packed-member
svgamodes: Add copyright notice to vgasrc/svgamodes.c
docs: Add developer-certificate-of-origin
docs: Note release date for v1.12.1

Liran Alon (1):
pvscsi: ring_desc do not have to be page aligned

Sam Eiderman (6):
smbios: Add missing zero byte to Type 0
geometry: Read LCHS from fw_cfg
boot: Reorder functions in boot.c
geometry: Add boot_lchs_find_*() utility functions
config: Add toggle for bootdevice information
geometry: Apply LCHS values for boot devices

Stefan Berger (2):
tcgbios: Use table to convert hash to buffer size
tcgbios: Implement TPM 2.0 menu item to activate and deactivate PCR banks

Stefano Garzarella (1):
qemu: avoid debug prints if debugcon is not enabled

Stephen Douthit (1):
tpm: Check for TPM related ACPI tables before attempting hw probe

Uwe Kleine-König (3):
cbvga: reuse svga modes definitions from svgamodes.c
Add additional resolutions for 16:9 displays: 1600x900 and 2560x1440
Remove dos line endings introduced in the last two commits

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

Update OpenBIOS images to 7e5b89e4 built from submodule.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

pseries: Update SLOF firmware image

This aims v4.2 and fixes:
1. full FDT rendering;
2. gcc9 -Waddress-of-packed-member.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gib

pseries: Update SLOF firmware image

This aims v4.2 and fixes:
1. full FDT rendering;
2. gcc9 -Waddress-of-packed-member.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

roms: add microvm-bios (qboot) as binary and git submodule

qboot is a minimalist x86 firmware for booting Linux kernels. It does
the mininum amount of work required for the task, and it's able to
bo

roms: add microvm-bios (qboot) as binary and git submodule

qboot is a minimalist x86 firmware for booting Linux kernels. It does
the mininum amount of work required for the task, and it's able to
boot both PVH images and bzImages without relying on option roms.

This characteristics make it an ideal companion for the microvm
machine type.

Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Update OpenBIOS images to f28e16f9 built from submodule.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

pseries: Update SLOF firmware image

This fixes USB host bus adapter name in the device tree to match QEMU's
one.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <dav

pseries: Update SLOF firmware image

This fixes USB host bus adapter name in the device tree to match QEMU's
one.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

spapr: Stop providing RTAS blob

SLOF implements one itself so let's remove it from QEMU. It is one less
image and simpler setup as the RTAS blob never stays in its initial place
anyway as the guest

spapr: Stop providing RTAS blob

SLOF implements one itself so let's remove it from QEMU. It is one less
image and simpler setup as the RTAS blob never stays in its initial place
anyway as the guest OS always decides where to put it.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

pc-bios/s390-ccw: Rebuild the s390-netboot.img firmware image

The new image now contains the "pc-bios/s390-ccw/net: fix a possible
memory leak in get_uuid()" patch.

Signed-off-by: Thomas Huth <thut

pc-bios/s390-ccw: Rebuild the s390-netboot.img firmware image

The new image now contains the "pc-bios/s390-ccw/net: fix a possible
memory leak in get_uuid()" patch.

Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

pc-bios/s390-ccw/net: fix a possible memory leak in get_uuid()

There is a possible memory leak in get_uuid(). Should free allocated mem
before
return NULL.

Signed-off-by: Yifan Luo <luoyifan@cmss.c

pc-bios/s390-ccw/net: fix a possible memory leak in get_uuid()

There is a possible memory leak in get_uuid(). Should free allocated mem
before
return NULL.

Signed-off-by: Yifan Luo <luoyifan@cmss.chinamobile.com>
Message-Id: <02cf01d55267$86cf2850$946d78f0$@cmss.chinamobile.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

pc-bios/s390-ccw: Do not pre-initialize empty array

Since commit 339686a358b11a231aa5b6d1424e7a1460d7f277 ("pc-bios/s390-ccw:
zero out bss section"), we are clearing now the BSS in start.S, so there

pc-bios/s390-ccw: Do not pre-initialize empty array

Since commit 339686a358b11a231aa5b6d1424e7a1460d7f277 ("pc-bios/s390-ccw:
zero out bss section"), we are clearing now the BSS in start.S, so there
is no need to pre-initialize the loadparm_str array with zeroes anymore.

Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

riscv: roms: Update default bios for sifive_u machine

With the support of heterogeneous harts and PRCI model, it's now
possible to use the OpenSBI image (PLATFORM=sifive/fu540) built
for the real ha

riscv: roms: Update default bios for sifive_u machine

With the support of heterogeneous harts and PRCI model, it's now
possible to use the OpenSBI image (PLATFORM=sifive/fu540) built
for the real hardware.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

show more ...

riscv: roms: Remove executable attribute of opensbi images

Like other binary files, the executable attribute of opensbi images
should not be set.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Review

riscv: roms: Remove executable attribute of opensbi images

Like other binary files, the executable attribute of opensbi images
should not be set.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

show more ...

pseries: Update SLOF firmware image

This allocates space for FWNMI log in RTAS and fixes phandles at
the ibm,client-architecture-support stage.

The full list is:
* libnet: Fix the check of the arg

pseries: Update SLOF firmware image

This allocates space for FWNMI log in RTAS and fixes phandles at
the ibm,client-architecture-support stage.

The full list is:
* libnet: Fix the check of the argument lengths of the "ping" command
* fdt: Update phandles after H_CAS
* rtas: Reserve space for FWNMI log

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

ppc/pnv: update skiboot to v6.4

Currently we fail to boot a qemu powernv machine with a Power9
processor:

PLAT: Detected generic platform
PLAT: Detected BMC platform generic
CPU: All 1 processor

ppc/pnv: update skiboot to v6.4

Currently we fail to boot a qemu powernv machine with a Power9
processor:

PLAT: Detected generic platform
PLAT: Detected BMC platform generic
CPU: All 1 processors called in...
CHIPTOD: Unknown TOD type !
CHIPTOD: Failed ChipTOD detection !
Aborting!

With v6.4 we can boot both a Power8 and Power9 powernv machine.

Built from submodule with powerpc64le-linux-gnu-gcc (Debian 8.3.0-2).

Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20190718054218.9581-1-joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...