19         "machine_name": { "default_value": "MBot3D Grid 2+ Dual" },  string
21 …"default_value": "M136\nG162 X Y F2000\nG161 Z F900\nG92 X0 Y0 Z-5 A0 B0\nG1 Z0.0 F900\nG161 Z F10…  string
24 …"default_value": "M18 A B(Turn off A and B steppers)\nG1 Z190 F900\nG162 X Y F2000\nM18 X Y Z(Turn…  string
26         "machine_width": { "default_value": 235 },  number
27         "machine_depth": { "default_value": 210 },  number
28         "machine_height": { "default_value": 190 },  number
29         "machine_extruder_count": { "default_value": 2 },  number
30         "machine_center_is_zero": { "default_value": true },  boolean
31         "machine_gcode_flavor": { "default_value": "Makerbot" },  string
32 …"machine_head_with_fans_polygon": { "default_value": [ [ -37, 50 ], [ 25, 50 ], [ 25, -40 ], [ -37…  array
34         "machine_steps_per_mm_x": { "default_value": 88.888889 },  number
35         "machine_steps_per_mm_y": { "default_value": 88.888889 },  number
36         "machine_steps_per_mm_z": { "default_value": 400 },  number
37         "machine_steps_per_mm_e": { "default_value": 96.27520187033366 },  number
38         "retraction_amount": { "default_value": 0.7 },  number
39         "retraction_speed": { "default_value": 15 },  number
40         "speed_print": { "default_value": 50 },  number
45         "support_interface_enable": { "default_value": true },  boolean
46         "support_interface_height": { "default_value": 0.8 },  number
47         "support_interface_density": { "default_value": 80 },  number
48         "support_interface_pattern": { "default_value": "grid" },  string
50         "retract_at_layer_change": { "default_value": true },  boolean
51         "travel_retract_before_outer_wall": { "default_value": true },  boolean
54         "travel_avoid_other_parts": { "default_value": false },  boolean
55         "raft_airgap": { "default_value": 0.15 },  number
56         "raft_margin": { "default_value": 6 }  number