Lines Matching refs:s
106 "OMP: Info #%1$d: %2$s\n",
107 "OMP: Warning #%1$d: %2$s\n",
108 "OMP: Error #%1$d: %2$s\n",
109 "OMP: System error #%1$d: %2$s\n",
110 "OMP: Hint %1$s\n",
111 "%1$s pragma (at %2$s:%3$s():%4$s)",
120 "Cannot open message catalog \"%1$s\":",
122 "%1$s: Lock is uninitialized",
123 "%1$s: Lock was initialized as simple, but used as nestable",
124 "%1$s: Lock was initialized as nestable, but used as simple",
125 "%1$s: Lock is already owned by requesting thread",
126 "%1$s: Lock is still owned by a thread",
127 "%1$s: Attempt to release a lock not owned by any thread",
128 "%1$s: Attempt to release a lock owned by another thread",
131 "Assertion failure at %1$s(%2$d).",
133 "Initializing %1$s, but found %2$s already initialized.",
134 "Cannot open file \"%1$s\" for reading:",
135 "Getting environment variable \"%1$s\" failed:",
136 "Setting environment variable \"%1$s\" failed:",
138 "%1$s=\"%2$s\": Wrong value, boolean expected.",
157 "%1$s value \"%2$s\" is invalid.",
158 "%1$s value \"%2$s\" is too small.",
159 "%1$s value \"%2$s\" is too large.",
160 "%1$s: \"%2$s\" is an invalid value; ignored.",
161 "%1$s release value \"%2$s\" is invalid.",
162 "%1$s gather value \"%2$s\" is invalid.",
163 "%1$s supported only on debug builds; ignored.",
164 …"Syntax error: Usage: %1$s=[ routine=<func> | filename=<file> | range=<lb>:<ub> | excl_range=<lb>:…
165 "Unbalanced quotes in %1$s.",
166 "Empty string specified for %1$s; ignored.",
167 "%1$s value is too long; ignored.",
168 "%1$s: Invalid clause in \"%2$s\".",
169 "Empty clause in %1$s.",
170 "%1$s value \"%2$s\" is invalid chunk size.",
171 "%1$s value \"%2$s\" is to large chunk size.",
172 "%1$s value \"%2$s\" is ignored.",
174 "%1$s must be set prior to first parallel region; ignored.",
175 "%1$s: parameter has been specified already, ignoring \"%2$s\".",
176 "%1$s: parameter invalid, ignoring \"%2$s\".",
177 "%1$s: too many integer parameters specified, ignoring \"%2$s\".",
178 … "%1$s: too many integer parameters specified for logical or physical type, ignoring \"%2$d\".",
179 "%1$s: '%2$s' type does not take any integer parameters, ignoring them.",
180 "%1$s: proclist not specified with explicit affinity type, using \"none\".",
181 "%1$s: proclist specified, setting affinity type to \"explicit\".",
182 "%1$s: proclist specified without \"explicit\" affinity type, proclist ignored.",
183 "%1$s: syntax error, not using affinity.",
184 "%1$s: range error (zero stride), not using affinity.",
185 "%1$s: range error (%2$d > %3$d), not using affinity.",
186 "%1$s: range error (%2$d < %3$d & stride < 0), not using affinity.",
187 "%1$s: range error ((%2$d-%3$d)/%4$d too big), not using affinity.",
188 "%1$s: %2$s is defined. %3$s will be ignored.",
189 "%1$s: affinity not supported, using \"disabled\".",
190 "%1$s: affinity only supported for Intel(R) Architecture Processors.",
191 "%1$s: getaffinity system call not supported.",
192 "%1$s: setaffinity system call not supported.",
193 "%1$s: pthread_aff_set_np call not found.",
194 "%1$s: pthread_get_num_resources_np call not found.",
195 "%1$s: the OS kernel does not support affinity.",
196 "%1$s: pthread_get_num_resources_np returned %2$d.",
197 "%1$s: cannot determine proper affinity mask size.",
198 "%1$s=\"%2$s\": %3$s.",
199 "%1$s: extra trailing characters ignored: \"%2$s\".",
200 "%1$s: unknown method \"%2$s\".",
202 …"KMP_STATS_TIMER: \"%1$s\" needs additional parameter, e.g. 'clock_gettime,2'. Using gettimeofday.…
203 "KMP_STATS_TIMER: clock_gettime parameter \"%1$s\" is invalid, using gettimeofday.",
205 "KMP_STATS_TIMER: clock function unknown (ignoring value \"%1$s\").",
208 "ittnotify: Lookup of \"%1$s\" function in \"%2$s\" library failed.",
209 "ittnotify: Loading \"%1$s\" library failed.",
213 "ittnotify: Unloading \"%1$s\" library failed.",
222 "%1$s value \"%2$d\" will be used.",
223 "%1$s value \"%2$u\" will be used.",
224 "%1$s value \"%2$s\" will be used.",
225 "%1$s value \"%2$s\" will be used.",
227 "%1$s maximum value \"%2$d\" will be used.",
228 "%1$s minimum value \"%2$d\" will be used.",
233 "%1$s: invalid mask.",
244 "%1$s - using \"flat\" OS <-> physical proc mapping.",
245 "%1$s: %2$s - using \"flat\" OS <-> physical proc mapping.",
246 "%1$s, line %2$d: %3$s - using \"flat\" OS <-> physical proc mapping.",
247 "%1$s: %2$s - exiting.",
248 "%1$s, line %2$d: %3$s - exiting.",
263 "%1$s: Threads may migrate across %2$d innermost levels of machine",
264 "%1$s: decrease to %2$d threads",
265 "%1$s: increase to %2$d threads",
266 "%1$s: Internal thread %2$d bound to OS proc set %3$s",
267 "%1$s: Affinity capable, using cpuinfo file",
268 "%1$s: Affinity capable, using global cpuid info",
269 "%1$s: Affinity capable, using default \"flat\" topology",
270 "%1$s: Affinity not capable, using local cpuid info",
271 "%1$s: Affinity not capable, using cpuinfo file",
272 "%1$s: Affinity not capable, assuming \"flat\" topology",
273 "%1$s: Initial OS proc set respected: %2$s",
274 "%1$s: Initial OS proc set not respected: %2$s",
275 "%1$s: %2$d available OS procs",
276 "%1$s: Uniform topology",
277 "%1$s: Nonuniform topology",
278 "%1$s: %2$d packages x %3$d cores/pkg x %4$d threads/core (%5$d total cores)",
279 "%1$s: OS proc to physical thread map ([] => level not in map):",
280 "%1$s: OS proc <n> maps to <n>th package core 0",
281 "%1$s: OS proc %2$d maps to package %3$d [core %4$d] [thread %5$d]",
282 "%1$s: OS proc %2$d maps to [package %3$d] [core %4$d] [thread %5$d]",
283 "%1$s: OS proc %2$d maps to [package %3$d] [core %4$d] thread %5$d",
284 "%1$s: OS proc %2$d maps to [package %3$d] core %4$d [thread %5$d]",
285 "%1$s: OS proc %2$d maps to package %3$d [core %4$d] [thread %5$d]",
286 "%1$s: OS proc %2$d maps to [package %3$d] core %4$d thread %5$d",
287 "%1$s: OS proc %2$d maps to package %3$d core %4$d [thread %5$d]",
288 "%1$s: OS proc %2$d maps to package %3$d [core %4$d] thread %5$d",
289 "%1$s: OS proc %2$d maps to package %3$d core %4$d thread %5$d",
290 "%1$s: OS proc %2$d maps to %3$s",
291 "%1$s: Internal thread %2$d changed affinity mask from %3$s to %4$s",
292 "%1$s: OS proc %2$d maps to package %3$d, CPU %4$d, TPU %5$d",
293 "%1$s: OS proc %2$d maps to package %3$d, CPU %4$d",
294 "%1$s: HT enabled; %2$d packages; %3$d TPU; %4$d TPUs per package",
295 "%1$s: HT disabled; %2$d packages",
297 "Function %1$s failed:",
298 "%1$s: %2$s packages x %3$d cores/pkg x %4$d threads/core (%5$d total cores)",
299 "Incompatible message catalog \"%1$s\": Version \"%2$s\" found, version \"%3$s\" expected.",
300 "%1$s: ignored because %2$s has been defined",
301 "%1$s: overrides %3$s specified before",
302 … "%1$s: Tiles are only supported if KMP_TOPOLOGY_METHOD=hwloc, using granularity=package instead",
303 "%1$s: Tiles requested but were not detected on this HW, using granularity=package instead",
304 … "%1$s: %2$d packages x %3$d tiles/pkg x %4$d cores/tile x %5$d threads/core (%6$d total cores)",
305 … "%1$s: %2$d packages x %3$d nodes/pkg x %4$d cores/node x %5$d threads/core (%6$d total cores)",
306 …"%1$s: %2$d packages x %3$d nodes/pkg x %4$d tiles/node x %5$d cores/tile x %6$d threads/core (%7$…
308 "Allocator %1$s is not available, will use default allocator.",
309 "%1$s: %2$s (%3$d total cores)",
310 … "%1$s: granularity setting: %2$s does not exist in topology. Using granularity=%3$s instead.",
311 "%1$s: hybrid core type detected: %2$d %3$s cores.",
312 "%1$s: %2$d with core efficiency %3$d.",
313 "%1$s must be bound to a work-sharing or work-queuing construct with an \"ordered\" clause",
314 "Detected end of %1$s without first executing a corresponding beginning.",
315 "Iteration range too large in %1$s.",
316 "%1$s must not have a loop increment that evaluates to zero.",
317 "Expected end of %1$s; %2$s, however, has most recently begun execution.",
318 "%1$s is incorrectly nested within %2$s",
319 …"%1$s cannot be executed multiple times during execution of one parallel iteration/section of %2$s…
320 "%1$s is incorrectly nested within %2$s of the same name",
321 "%1$s is incorrectly nested within %2$s that does not have an \"ordered\" clause",
322 "%1$s is incorrectly nested within %2$s but not within any of its \"task\" constructs",
323 "One thread at %1$s while another thread is at %2$s.",
324 "Cannot connect to %1$s",
325 "Cannot connect to %1$s - Using %2$s",
326 "%1$s does not support %2$s. Continuing without using %2$s.",
327 "%1$s does not support %2$s for %3$s. Continuing without using %2$s.",
328 "Static %1$s does not support %2$s. Continuing without using %2$s.",
330 "ittnotify: Unknown group \"%2$s\" specified in environment variable \"%1$s\".",
331 …"ittnotify: Environment variable \"%1$s\" too long: Actual lengths is %2$lu, max allowed length is…
332 "%1$s: Affinity capable, using global cpuid leaf 11 info",
333 "%1$s: Affinity not capable, using local cpuid leaf 11 info",
334 "%1$s: %2$s.",
335 "%1$s: %2$s - %3$s.",
336 "%1$s: OS proc to physical thread map:",
337 "%1$s: using \"flat\" OS <-> physical proc mapping.",
338 "%1$s: parsing %2$s.",
339 "%1$s - exiting.",
340 "Incompatible %1$s library with version %2$s found.",
341 "ittnotify: Function %1$s failed:",
343 "%1$s must be set prior to first parallel region or certain API calls; ignored.",
344 "Lock initialized at %1$s(%2$d) was not destroyed",
345 "Cannot determine machine load balance - Using %1$s",
346 "%1$s: Affinity not capable, using pthread info",
347 "%1$s: Affinity capable, using pthread info",
348 "Loading \"%1$s\" library failed:",
349 "Lookup of \"%1$s\" function failed:",
352 "%1$s: Invalid symbols found. Check the value \"%2$s\".",
353 "%1$s: Spaces between digits are not allowed \"%2$s\".",
354 "%1$s: %2$s - parsing %3$s.",
355 …"%1$s cannot be specified via kmp_set_defaults() on this machine because it has more than one proc…
356 … "Cannot use affinity type \"%1$s\" with multiple Windows* OS processor groups, using \"%2$s\".",
357 …"Cannot use affinity granularity \"%1$s\" with multiple Windows* OS processor groups, using \"%2$s…
358 "%1$s: Mapping Windows* OS processor group <i> proc <j> to OS proc 64*<i>+<j>.",
359 "%1$s: OS proc %2$d maps to Windows* OS processor group %3$d proc %4$d",
360 "%1$s: Affinity balanced is not available.",
361 "%1$s: granularity=core will be used.",
362 "%1$s must be set prior to first OMP lock call or critical section; ignored.",
363 "futex system call not supported; %1$s=%2$s ignored.",
364 "%1$s: granularity=%2$s will be used.",
365 …"%1$s: invalid value \"%2$s\", valid format is \"N<item>[@N][,...][,Nt] (<item> can be S, N, L2, C…
368 "%1$s: syntax error, using %2$s.",
369 "%1$s: Adaptive locks are not supported; using queuing.",
370 "%1$s: Invalid symbols found. Check the value \"%2$s\".",
371 "%1$s: Spaces between digits are not allowed \"%2$s\".",
372 "%1$s: pid %2$d tid %3$d thread %4$d bound to OS proc set %5$s",
373 "%1$s error: parallel loop increment and condition are inconsistent.",
377 …"%1$s: granularity=%2$s is not supported with KMP_TOPOLOGY_METHOD=group. Using \"granularity=fine\…
378 … "%1$s: granularity=group is not supported with KMP_AFFINITY=%2$s. Using \"granularity=core\".",
381 "%1$s: Affinity capable, using hwloc.",
382 "%1$s: Ignoring hwloc mechanism.",
383 "%1$s: Hwloc failed in %2$s. Relying on internal affinity mechanisms.",
384 "%1$s must be set prior to OpenMP runtime library initialization; ignored.",
386 "%1$s variable deprecated, please use %2$s instead.",
387 "KMP_FORCE_REDUCTION: %1$s method is not supported; using critical.",
392 "Hierarchy ignored: unsupported level: %1$s.",
393 "OMP: pid %1$s tid %2$s thread %3$s bound to OS proc set {%4$s}",
394 "%1$s routine deprecated, please use %2$s instead.",
395 "libgomp compatibility layer does not support OpenMP feature: %1$s",
397 "%1$s: Affinity capable, using global cpuid leaf %2$d info",
398 "%1$s: Affinity not capable, using local cpuid leaf %2$d info",
399 "%1$s: Affinity not capable, using hwloc.",
400 "%1$s: Encountered user-directed error: %2$s.",
401 "%1$s: Encountered user-directed warning: %2$s.",
403 "KMP_HW_SUBSET ignored: %1$s: too many requested.",
404 "KMP_HW_SUBSET ignored: %1$s: level not detected in machine topology.",
405 "KMP_HW_SUBSET ignored: %1$s, %2$s: layers are equivalent, please only specify one.",
406 "KMP_HW_SUBSET ignored: %1$s layer should come after %2$s.",
407 "%1$s: topology layer \"%2$s\" is equivalent to \"%3$s\".",
408 "%1$s: granularity=%2$s is too coarse, setting granularity=group.",
409 "%1$s: \"%2$s\" value is deprecated. Please use \"%3$s\" instead.",
411 "KMP_HW_SUBSET ignored: %1$s, %2$s: attributes are ambiguous, please only specify one.",
412 "KMP_HW_SUBSET ignored: %1$s: attribute specified more than once.",
413 "KMP_HW_SUBSET ignored: %1$s: attribute value %2$s is invalid.",
416 "KMP_HW_SUBSET: ignoring %1$s attribute. This machine is not a hybrid architecutre.",
418 "%1$s ignored: This machine is not a hybrid architecutre. Using \"%2$s\" instead.",
419 "%1$s ignored: %2$s is not available. Using \"%3$s\" instead.",
428 "Check NLSPATH environment variable, its value is \"%1$s\".",
447 "Will use default schedule type (%1$s).",
449 "Check %1$s environment variable, its value is \"%2$s\".",
450 "You may want to use an %1$s library that supports %2$s interface with version %3$s.",
451 "You may want to use an %1$s library with version %2$s.",
452 …corrupted or a file for another architecture. Check whether \"%1$s\" is a file for %2$s architectu…