Lines Matching refs:address

12   - "base-address"	- contains base address of ABB module (ti,abb-v1,ti,abb-v2)
13   - "control-address"	- contains control register address of ABB module (ti,abb-v3)
14   - "setup-address"	- contains setup register address of ABB module (ti,abb-v3)
15   - "int-address"	- contains address of interrupt register for ABB module
17 - #address-cells: should be 0
47   - "efuse-address"	- Contains efuse base address used to pick up ABB info.
48   - "ldo-address"	- Contains address of ABB LDO override register.
49 	"efuse-address" is required for this.
50 - ti,ldovbb-vset-mask	- Required if ldo-address is set, mask for LDO override
52 - ti,ldovbb-override-mask - Required if ldo-address is set, mask for LDO
55 	efuse: Mandatory if 'efuse-address' register is defined. Provides offset
56 	       from efuse-address to pick up ABB characteristics. Set to 0 if
57 	       'efuse-address' is not defined.
58 	RBB enable efuse Mask:	Optional if 'efuse-address' register is defined.
59 		'ABB mode' is force set to RBB mode if value at "efuse-address"
61 	FBB enable efuse Mask:	Optional if 'efuse-address' register is defined.
62 		'ABB mode' is force set to FBB mode if value at "efuse-address"
65 	Vset value efuse Mask:	Mandatory if ldo-address is set. Picks up from
66 		efuse the value to set in 'ti,ldovbb-vset-mask' at ldo-address.
72 	#address-cells = <0>;
75 	reg-names = "base-address", "int-address";
92 	#address-cells = <0>;
95 	reg-names = "base-address", "int-address", "efuse-address";
113 	#address-cells = <0>;
117 	reg-names = "base-address", "int-address",
118 		    "efuse-address", "ldo-address";