/*------------------------------------------------------------------------- * * lwlock.c * Lightweight lock manager * * Lightweight locks are intended primarily to provide mutual exclusion of * access to shared-memory data structures. Therefore, they offer both * exclusive and shared lock modes (to support read/write and read-only * access to a shared object). There are few other frammishes. User-level * locking should be done with the full lock manager --- which depends on * LWLocks to protect its shared state. * * In addition to exclusive and shared modes, lightweight locks can be used to * wait until a variable changes value. The variable is initially not set * when the lock is acquired with LWLockAcquire, i.e. it remains set to the * value it was set to when the lock was released last, and can be updated * without releasing the lock by calling LWLockUpdateVar. LWLockWaitForVar * waits for the variable to be updated, or until the lock is free. When * releasing the lock with LWLockReleaseClearVar() the value can be set to an * appropriate value for a free lock. The meaning of the variable is up to * the caller, the lightweight lock code just assigns and compares it. * * Portions Copyright (c) 1996-2016, PostgreSQL Global Development Group * Portions Copyright (c) 1994, Regents of the University of California * * IDENTIFICATION * src/backend/storage/lmgr/lwlock.c * * NOTES: * * This used to be a pretty straight forward reader-writer lock * implementation, in which the internal state was protected by a * spinlock. Unfortunately the overhead of taking the spinlock proved to be * too high for workloads/locks that were taken in shared mode very * frequently. Often we were spinning in the (obviously exclusive) spinlock, * while trying to acquire a shared lock that was actually free. * * Thus a new implementation was devised that provides wait-free shared lock * acquisition for locks that aren't exclusively locked. * * The basic idea is to have a single atomic variable 'lockcount' instead of * the formerly separate shared and exclusive counters and to use atomic * operations to acquire the lock. That's fairly easy to do for plain * rw-spinlocks, but a lot harder for something like LWLocks that want to wait * in the OS. * * For lock acquisition we use an atomic compare-and-exchange on the lockcount * variable. For exclusive lock we swap in a sentinel value * (LW_VAL_EXCLUSIVE), for shared locks we count the number of holders. * * To release the lock we use an atomic decrement to release the lock. If the * new value is zero (we get that atomically), we know we can/have to release * waiters. * * Obviously it is important that the sentinel value for exclusive locks * doesn't conflict with the maximum number of possible share lockers - * luckily MAX_BACKENDS makes that easily possible. * * * The attentive reader might have noticed that naively doing the above has a * glaring race condition: We try to lock using the atomic operations and * notice that we have to wait. Unfortunately by the time we have finished * queuing, the former locker very well might have already finished it's * work. That's problematic because we're now stuck waiting inside the OS. * To mitigate those races we use a two phased attempt at locking: * Phase 1: Try to do it atomically, if we succeed, nice * Phase 2: Add ourselves to the waitqueue of the lock * Phase 3: Try to grab the lock again, if we succeed, remove ourselves from * the queue * Phase 4: Sleep till wake-up, goto Phase 1 * * This protects us against the problem from above as nobody can release too * quick, before we're queued, since after Phase 2 we're already queued. * ------------------------------------------------------------------------- */ #include "postgres.h" #include "miscadmin.h" #include "pgstat.h" #include "pg_trace.h" #include "postmaster/postmaster.h" #include "replication/slot.h" #include "storage/ipc.h" #include "storage/predicate.h" #include "storage/proc.h" #include "storage/spin.h" #include "utils/memutils.h" #ifdef LWLOCK_STATS #include "utils/hsearch.h" #endif /* We use the ShmemLock spinlock to protect LWLockCounter */ extern slock_t *ShmemLock; #define LW_FLAG_HAS_WAITERS ((uint32) 1 << 30) #define LW_FLAG_RELEASE_OK ((uint32) 1 << 29) #define LW_FLAG_LOCKED ((uint32) 1 << 28) #define LW_VAL_EXCLUSIVE ((uint32) 1 << 24) #define LW_VAL_SHARED 1 #define LW_LOCK_MASK ((uint32) ((1 << 25)-1)) /* Must be greater than MAX_BACKENDS - which is 2^23-1, so we're fine. */ #define LW_SHARED_MASK ((uint32) ((1 << 24)-1)) /* * This is indexed by tranche ID and stores metadata for all tranches known * to the current backend. */ static LWLockTranche **LWLockTrancheArray = NULL; static int LWLockTranchesAllocated = 0; #define T_NAME(lock) \ (LWLockTrancheArray[(lock)->tranche]->name) #define T_ID(lock) \ ((int) ((((char *) lock) - \ ((char *) LWLockTrancheArray[(lock)->tranche]->array_base)) / \ LWLockTrancheArray[(lock)->tranche]->array_stride)) /* * This points to the main array of LWLocks in shared memory. Backends inherit * the pointer by fork from the postmaster (except in the EXEC_BACKEND case, * where we have special measures to pass it down). */ LWLockPadded *MainLWLockArray = NULL; static LWLockTranche MainLWLockTranche; static LWLockTranche BufMappingLWLockTranche; static LWLockTranche LockManagerLWLockTranche; static LWLockTranche PredicateLockManagerLWLockTranche; /* * We use this structure to keep track of locked LWLocks for release * during error recovery. Normally, only a few will be held at once, but * occasionally the number can be much higher; for example, the pg_buffercache * extension locks all buffer partitions simultaneously. */ #define MAX_SIMUL_LWLOCKS 200 /* struct representing the LWLocks we're holding */ typedef struct LWLockHandle { LWLock *lock; LWLockMode mode; } LWLockHandle; static int num_held_lwlocks = 0; static LWLockHandle held_lwlocks[MAX_SIMUL_LWLOCKS]; /* struct representing the LWLock tranche request for named tranche */ typedef struct NamedLWLockTrancheRequest { char tranche_name[NAMEDATALEN]; int num_lwlocks; } NamedLWLockTrancheRequest; NamedLWLockTrancheRequest *NamedLWLockTrancheRequestArray = NULL; static int NamedLWLockTrancheRequestsAllocated = 0; int NamedLWLockTrancheRequests = 0; NamedLWLockTranche *NamedLWLockTrancheArray = NULL; static bool lock_named_request_allowed = true; static void InitializeLWLocks(void); static void RegisterLWLockTranches(void); static inline void LWLockReportWaitStart(LWLock *lock); static inline void LWLockReportWaitEnd(void); #ifdef LWLOCK_STATS typedef struct lwlock_stats_key { int tranche; int instance; } lwlock_stats_key; typedef struct lwlock_stats { lwlock_stats_key key; int sh_acquire_count; int ex_acquire_count; int block_count; int dequeue_self_count; int spin_delay_count; } lwlock_stats; static HTAB *lwlock_stats_htab; static lwlock_stats lwlock_stats_dummy; #endif #ifdef LOCK_DEBUG bool Trace_lwlocks = false; inline static void PRINT_LWDEBUG(const char *where, LWLock *lock, LWLockMode mode) { /* hide statement & context here, otherwise the log is just too verbose */ if (Trace_lwlocks) { uint32 state = pg_atomic_read_u32(&lock->state); int id = T_ID(lock); if (lock->tranche == 0 && id < NUM_INDIVIDUAL_LWLOCKS) ereport(LOG, (errhidestmt(true), errhidecontext(true), errmsg_internal("%d: %s(%s): excl %u shared %u haswaiters %u waiters %u rOK %d", MyProcPid, where, MainLWLockNames[id], (state & LW_VAL_EXCLUSIVE) != 0, state & LW_SHARED_MASK, (state & LW_FLAG_HAS_WAITERS) != 0, pg_atomic_read_u32(&lock->nwaiters), (state & LW_FLAG_RELEASE_OK) != 0))); else ereport(LOG, (errhidestmt(true), errhidecontext(true), errmsg_internal("%d: %s(%s %d): excl %u shared %u haswaiters %u waiters %u rOK %d", MyProcPid, where, T_NAME(lock), id, (state & LW_VAL_EXCLUSIVE) != 0, state & LW_SHARED_MASK, (state & LW_FLAG_HAS_WAITERS) != 0, pg_atomic_read_u32(&lock->nwaiters), (state & LW_FLAG_RELEASE_OK) != 0))); } } inline static void LOG_LWDEBUG(const char *where, LWLock *lock, const char *msg) { /* hide statement & context here, otherwise the log is just too verbose */ if (Trace_lwlocks) { int id = T_ID(lock); if (lock->tranche == 0 && id < NUM_INDIVIDUAL_LWLOCKS) ereport(LOG, (errhidestmt(true), errhidecontext(true), errmsg_internal("%s(%s): %s", where, MainLWLockNames[id], msg))); else ereport(LOG, (errhidestmt(true), errhidecontext(true), errmsg_internal("%s(%s %d): %s", where, T_NAME(lock), id, msg))); } } #else /* not LOCK_DEBUG */ #define PRINT_LWDEBUG(a,b,c) ((void)0) #define LOG_LWDEBUG(a,b,c) ((void)0) #endif /* LOCK_DEBUG */ #ifdef LWLOCK_STATS static void init_lwlock_stats(void); static void print_lwlock_stats(int code, Datum arg); static lwlock_stats *get_lwlock_stats_entry(LWLock *lockid); static void init_lwlock_stats(void) { HASHCTL ctl; static MemoryContext lwlock_stats_cxt = NULL; static bool exit_registered = false; if (lwlock_stats_cxt != NULL) MemoryContextDelete(lwlock_stats_cxt); /* * The LWLock stats will be updated within a critical section, which * requires allocating new hash entries. Allocations within a critical * section are normally not allowed because running out of memory would * lead to a PANIC, but LWLOCK_STATS is debugging code that's not normally * turned on in production, so that's an acceptable risk. The hash entries * are small, so the risk of running out of memory is minimal in practice. */ lwlock_stats_cxt = AllocSetContextCreate(TopMemoryContext, "LWLock stats", ALLOCSET_DEFAULT_SIZES); MemoryContextAllowInCriticalSection(lwlock_stats_cxt, true); MemSet(&ctl, 0, sizeof(ctl)); ctl.keysize = sizeof(lwlock_stats_key); ctl.entrysize = sizeof(lwlock_stats); ctl.hcxt = lwlock_stats_cxt; lwlock_stats_htab = hash_create("lwlock stats", 16384, &ctl, HASH_ELEM | HASH_BLOBS | HASH_CONTEXT); if (!exit_registered) { on_shmem_exit(print_lwlock_stats, 0); exit_registered = true; } } static void print_lwlock_stats(int code, Datum arg) { HASH_SEQ_STATUS scan; lwlock_stats *lwstats; hash_seq_init(&scan, lwlock_stats_htab); /* Grab an LWLock to keep different backends from mixing reports */ LWLockAcquire(&MainLWLockArray[0].lock, LW_EXCLUSIVE); while ((lwstats = (lwlock_stats *) hash_seq_search(&scan)) != NULL) { fprintf(stderr, "PID %d lwlock %s %d: shacq %u exacq %u blk %u spindelay %u dequeue self %u\n", MyProcPid, LWLockTrancheArray[lwstats->key.tranche]->name, lwstats->key.instance, lwstats->sh_acquire_count, lwstats->ex_acquire_count, lwstats->block_count, lwstats->spin_delay_count, lwstats->dequeue_self_count); } LWLockRelease(&MainLWLockArray[0].lock); } static lwlock_stats * get_lwlock_stats_entry(LWLock *lock) { lwlock_stats_key key; lwlock_stats *lwstats; bool found; /* * During shared memory initialization, the hash table doesn't exist yet. * Stats of that phase aren't very interesting, so just collect operations * on all locks in a single dummy entry. */ if (lwlock_stats_htab == NULL) return &lwlock_stats_dummy; /* Fetch or create the entry. */ key.tranche = lock->tranche; key.instance = T_ID(lock); lwstats = hash_search(lwlock_stats_htab, &key, HASH_ENTER, &found); if (!found) { lwstats->sh_acquire_count = 0; lwstats->ex_acquire_count = 0; lwstats->block_count = 0; lwstats->dequeue_self_count = 0; lwstats->spin_delay_count = 0; } return lwstats; } #endif /* LWLOCK_STATS */ /* * Compute number of LWLocks required by named tranches. These will be * allocated in the main array. */ static int NumLWLocksByNamedTranches(void) { int numLocks = 0; int i; for (i = 0; i < NamedLWLockTrancheRequests; i++) numLocks += NamedLWLockTrancheRequestArray[i].num_lwlocks; return numLocks; } /* * Compute shmem space needed for LWLocks and named tranches. */ Size LWLockShmemSize(void) { Size size; int i; int numLocks = NUM_FIXED_LWLOCKS; numLocks += NumLWLocksByNamedTranches(); /* Space for the LWLock array. */ size = mul_size(numLocks, sizeof(LWLockPadded)); /* Space for dynamic allocation counter, plus room for alignment. */ size = add_size(size, sizeof(int) + LWLOCK_PADDED_SIZE); /* space for named tranches. */ size = add_size(size, mul_size(NamedLWLockTrancheRequests, sizeof(NamedLWLockTranche))); /* space for name of each tranche. */ for (i = 0; i < NamedLWLockTrancheRequests; i++) size = add_size(size, strlen(NamedLWLockTrancheRequestArray[i].tranche_name) + 1); /* Disallow named LWLocks' requests after startup */ lock_named_request_allowed = false; return size; } /* * Allocate shmem space for the main LWLock array and all tranches and * initialize it. We also register all the LWLock tranches here. */ void CreateLWLocks(void) { StaticAssertExpr(LW_VAL_EXCLUSIVE > (uint32) MAX_BACKENDS, "MAX_BACKENDS too big for lwlock.c"); StaticAssertExpr(sizeof(LWLock) <= LWLOCK_MINIMAL_SIZE && sizeof(LWLock) <= LWLOCK_PADDED_SIZE, "Miscalculated LWLock padding"); if (!IsUnderPostmaster) { Size spaceLocks = LWLockShmemSize(); int *LWLockCounter; char *ptr; /* Allocate space */ ptr = (char *) ShmemAlloc(spaceLocks); /* Leave room for dynamic allocation of tranches */ ptr += sizeof(int); /* Ensure desired alignment of LWLock array */ ptr += LWLOCK_PADDED_SIZE - ((uintptr_t) ptr) % LWLOCK_PADDED_SIZE; MainLWLockArray = (LWLockPadded *) ptr; /* * Initialize the dynamic-allocation counter for tranches, which is * stored just before the first LWLock. */ LWLockCounter = (int *) ((char *) MainLWLockArray - sizeof(int)); *LWLockCounter = LWTRANCHE_FIRST_USER_DEFINED; /* Initialize all LWLocks */ InitializeLWLocks(); } /* Register all LWLock tranches */ RegisterLWLockTranches(); } /* * Initialize LWLocks that are fixed and those belonging to named tranches. */ static void InitializeLWLocks(void) { int numNamedLocks = NumLWLocksByNamedTranches(); int id; int i; int j; LWLockPadded *lock; /* Initialize all individual LWLocks in main array */ for (id = 0, lock = MainLWLockArray; id < NUM_INDIVIDUAL_LWLOCKS; id++, lock++) LWLockInitialize(&lock->lock, LWTRANCHE_MAIN); /* Initialize buffer mapping LWLocks in main array */ lock = MainLWLockArray + NUM_INDIVIDUAL_LWLOCKS; for (id = 0; id < NUM_BUFFER_PARTITIONS; id++, lock++) LWLockInitialize(&lock->lock, LWTRANCHE_BUFFER_MAPPING); /* Initialize lmgrs' LWLocks in main array */ lock = MainLWLockArray + NUM_INDIVIDUAL_LWLOCKS + NUM_BUFFER_PARTITIONS; for (id = 0; id < NUM_LOCK_PARTITIONS; id++, lock++) LWLockInitialize(&lock->lock, LWTRANCHE_LOCK_MANAGER); /* Initialize predicate lmgrs' LWLocks in main array */ lock = MainLWLockArray + NUM_INDIVIDUAL_LWLOCKS + NUM_BUFFER_PARTITIONS + NUM_LOCK_PARTITIONS; for (id = 0; id < NUM_PREDICATELOCK_PARTITIONS; id++, lock++) LWLockInitialize(&lock->lock, LWTRANCHE_PREDICATE_LOCK_MANAGER); /* Initialize named tranches. */ if (NamedLWLockTrancheRequests > 0) { char *trancheNames; NamedLWLockTrancheArray = (NamedLWLockTranche *) &MainLWLockArray[NUM_FIXED_LWLOCKS + numNamedLocks]; trancheNames = (char *) NamedLWLockTrancheArray + (NamedLWLockTrancheRequests * sizeof(NamedLWLockTranche)); lock = &MainLWLockArray[NUM_FIXED_LWLOCKS]; for (i = 0; i < NamedLWLockTrancheRequests; i++) { NamedLWLockTrancheRequest *request; NamedLWLockTranche *tranche; char *name; request = &NamedLWLockTrancheRequestArray[i]; tranche = &NamedLWLockTrancheArray[i]; name = trancheNames; trancheNames += strlen(request->tranche_name) + 1; strcpy(name, request->tranche_name); tranche->lwLockTranche.name = name; tranche->trancheId = LWLockNewTrancheId(); tranche->lwLockTranche.array_base = lock; tranche->lwLockTranche.array_stride = sizeof(LWLockPadded); for (j = 0; j < request->num_lwlocks; j++, lock++) LWLockInitialize(&lock->lock, tranche->trancheId); } } } /* * Register named tranches and tranches for fixed LWLocks. */ static void RegisterLWLockTranches(void) { int i; if (LWLockTrancheArray == NULL) { LWLockTranchesAllocated = 32; LWLockTrancheArray = (LWLockTranche **) MemoryContextAllocZero(TopMemoryContext, LWLockTranchesAllocated * sizeof(LWLockTranche *)); Assert(LWLockTranchesAllocated >= LWTRANCHE_FIRST_USER_DEFINED); } MainLWLockTranche.name = "main"; MainLWLockTranche.array_base = MainLWLockArray; MainLWLockTranche.array_stride = sizeof(LWLockPadded); LWLockRegisterTranche(LWTRANCHE_MAIN, &MainLWLockTranche); BufMappingLWLockTranche.name = "buffer_mapping"; BufMappingLWLockTranche.array_base = MainLWLockArray + NUM_INDIVIDUAL_LWLOCKS; BufMappingLWLockTranche.array_stride = sizeof(LWLockPadded); LWLockRegisterTranche(LWTRANCHE_BUFFER_MAPPING, &BufMappingLWLockTranche); LockManagerLWLockTranche.name = "lock_manager"; LockManagerLWLockTranche.array_base = MainLWLockArray + NUM_INDIVIDUAL_LWLOCKS + NUM_BUFFER_PARTITIONS; LockManagerLWLockTranche.array_stride = sizeof(LWLockPadded); LWLockRegisterTranche(LWTRANCHE_LOCK_MANAGER, &LockManagerLWLockTranche); PredicateLockManagerLWLockTranche.name = "predicate_lock_manager"; PredicateLockManagerLWLockTranche.array_base = MainLWLockArray + NUM_INDIVIDUAL_LWLOCKS + NUM_BUFFER_PARTITIONS + NUM_LOCK_PARTITIONS; PredicateLockManagerLWLockTranche.array_stride = sizeof(LWLockPadded); LWLockRegisterTranche(LWTRANCHE_PREDICATE_LOCK_MANAGER, &PredicateLockManagerLWLockTranche); /* Register named tranches. */ for (i = 0; i < NamedLWLockTrancheRequests; i++) LWLockRegisterTranche(NamedLWLockTrancheArray[i].trancheId, &NamedLWLockTrancheArray[i].lwLockTranche); } /* * InitLWLockAccess - initialize backend-local state needed to hold LWLocks */ void InitLWLockAccess(void) { #ifdef LWLOCK_STATS init_lwlock_stats(); #endif } /* * GetNamedLWLockTranche - returns the base address of LWLock from the * specified tranche. * * Caller needs to retrieve the requested number of LWLocks starting from * the base lock address returned by this API. This can be used for * tranches that are requested by using RequestNamedLWLockTranche() API. */ LWLockPadded * GetNamedLWLockTranche(const char *tranche_name) { int lock_pos; int i; /* * Obtain the position of base address of LWLock belonging to requested * tranche_name in MainLWLockArray. LWLocks for named tranches are placed * in MainLWLockArray after fixed locks. */ lock_pos = NUM_FIXED_LWLOCKS; for (i = 0; i < NamedLWLockTrancheRequests; i++) { if (strcmp(NamedLWLockTrancheRequestArray[i].tranche_name, tranche_name) == 0) return &MainLWLockArray[lock_pos]; lock_pos += NamedLWLockTrancheRequestArray[i].num_lwlocks; } if (i >= NamedLWLockTrancheRequests) elog(ERROR, "requested tranche is not registered"); /* just to keep compiler quiet */ return NULL; } /* * Allocate a new tranche ID. */ int LWLockNewTrancheId(void) { int result; int *LWLockCounter; LWLockCounter = (int *) ((char *) MainLWLockArray - sizeof(int)); SpinLockAcquire(ShmemLock); result = (*LWLockCounter)++; SpinLockRelease(ShmemLock); return result; } /* * Register a tranche ID in the lookup table for the current process. This * routine will save a pointer to the tranche object passed as an argument, * so that object should be allocated in a backend-lifetime context * (TopMemoryContext, static variable, or similar). */ void LWLockRegisterTranche(int tranche_id, LWLockTranche *tranche) { Assert(LWLockTrancheArray != NULL); if (tranche_id >= LWLockTranchesAllocated) { int i = LWLockTranchesAllocated; int j = LWLockTranchesAllocated; while (i <= tranche_id) i *= 2; LWLockTrancheArray = (LWLockTranche **) repalloc(LWLockTrancheArray, i * sizeof(LWLockTranche *)); LWLockTranchesAllocated = i; while (j < LWLockTranchesAllocated) LWLockTrancheArray[j++] = NULL; } LWLockTrancheArray[tranche_id] = tranche; } /* * RequestNamedLWLockTranche * Request that extra LWLocks be allocated during postmaster * startup. * * This is only useful for extensions if called from the _PG_init hook * of a library that is loaded into the postmaster via * shared_preload_libraries. Once shared memory has been allocated, calls * will be ignored. (We could raise an error, but it seems better to make * it a no-op, so that libraries containing such calls can be reloaded if * needed.) */ void RequestNamedLWLockTranche(const char *tranche_name, int num_lwlocks) { NamedLWLockTrancheRequest *request; if (IsUnderPostmaster || !lock_named_request_allowed) return; /* too late */ if (NamedLWLockTrancheRequestArray == NULL) { NamedLWLockTrancheRequestsAllocated = 16; NamedLWLockTrancheRequestArray = (NamedLWLockTrancheRequest *) MemoryContextAlloc(TopMemoryContext, NamedLWLockTrancheRequestsAllocated * sizeof(NamedLWLockTrancheRequest)); } if (NamedLWLockTrancheRequests >= NamedLWLockTrancheRequestsAllocated) { int i = NamedLWLockTrancheRequestsAllocated; while (i <= NamedLWLockTrancheRequests) i *= 2; NamedLWLockTrancheRequestArray = (NamedLWLockTrancheRequest *) repalloc(NamedLWLockTrancheRequestArray, i * sizeof(NamedLWLockTrancheRequest)); NamedLWLockTrancheRequestsAllocated = i; } request = &NamedLWLockTrancheRequestArray[NamedLWLockTrancheRequests]; Assert(strlen(tranche_name) + 1 < NAMEDATALEN); StrNCpy(request->tranche_name, tranche_name, NAMEDATALEN); request->num_lwlocks = num_lwlocks; NamedLWLockTrancheRequests++; } /* * LWLockInitialize - initialize a new lwlock; it's initially unlocked */ void LWLockInitialize(LWLock *lock, int tranche_id) { pg_atomic_init_u32(&lock->state, LW_FLAG_RELEASE_OK); #ifdef LOCK_DEBUG pg_atomic_init_u32(&lock->nwaiters, 0); #endif lock->tranche = tranche_id; dlist_init(&lock->waiters); } /* * Report start of wait event for light-weight locks. * * This function will be used by all the light-weight lock calls which * needs to wait to acquire the lock. This function distinguishes wait * event based on tranche and lock id. */ static inline void LWLockReportWaitStart(LWLock *lock) { int lockId = T_ID(lock); if (lock->tranche == 0) pgstat_report_wait_start(WAIT_LWLOCK_NAMED, (uint16) lockId); else pgstat_report_wait_start(WAIT_LWLOCK_TRANCHE, lock->tranche); } /* * Report end of wait event for light-weight locks. */ static inline void LWLockReportWaitEnd(void) { pgstat_report_wait_end(); } /* * Return an identifier for an LWLock based on the wait class and event. */ const char * GetLWLockIdentifier(uint8 classId, uint16 eventId) { if (classId == WAIT_LWLOCK_NAMED) return MainLWLockNames[eventId]; Assert(classId == WAIT_LWLOCK_TRANCHE); /* * It is quite possible that user has registered tranche in one of the * backends (e.g. by allocating lwlocks in dynamic shared memory) but not * all of them, so we can't assume the tranche is registered here. */ if (eventId >= LWLockTranchesAllocated || LWLockTrancheArray[eventId]->name == NULL) return "extension"; return LWLockTrancheArray[eventId]->name; } /* * Internal function that tries to atomically acquire the lwlock in the passed * in mode. * * This function will not block waiting for a lock to become free - that's the * callers job. * * Returns true if the lock isn't free and we need to wait. */ static bool LWLockAttemptLock(LWLock *lock, LWLockMode mode) { uint32 old_state; AssertArg(mode == LW_EXCLUSIVE || mode == LW_SHARED); /* * Read once outside the loop, later iterations will get the newer value * via compare & exchange. */ old_state = pg_atomic_read_u32(&lock->state); /* loop until we've determined whether we could acquire the lock or not */ while (true) { uint32 desired_state; bool lock_free; desired_state = old_state; if (mode == LW_EXCLUSIVE) { lock_free = (old_state & LW_LOCK_MASK) == 0; if (lock_free) desired_state += LW_VAL_EXCLUSIVE; } else { lock_free = (old_state & LW_VAL_EXCLUSIVE) == 0; if (lock_free) desired_state += LW_VAL_SHARED; } /* * Attempt to swap in the state we are expecting. If we didn't see * lock to be free, that's just the old value. If we saw it as free, * we'll attempt to mark it acquired. The reason that we always swap * in the value is that this doubles as a memory barrier. We could try * to be smarter and only swap in values if we saw the lock as free, * but benchmark haven't shown it as beneficial so far. * * Retry if the value changed since we last looked at it. */ if (pg_atomic_compare_exchange_u32(&lock->state, &old_state, desired_state)) { if (lock_free) { /* Great! Got the lock. */ #ifdef LOCK_DEBUG if (mode == LW_EXCLUSIVE) lock->owner = MyProc; #endif return false; } else return true; /* somebody else has the lock */ } } pg_unreachable(); } /* * Lock the LWLock's wait list against concurrent activity. * * NB: even though the wait list is locked, non-conflicting lock operations * may still happen concurrently. * * Time spent holding mutex should be short! */ static void LWLockWaitListLock(LWLock *lock) { uint32 old_state; #ifdef LWLOCK_STATS lwlock_stats *lwstats; uint32 delays = 0; lwstats = get_lwlock_stats_entry(lock); #endif while (true) { /* always try once to acquire lock directly */ old_state = pg_atomic_fetch_or_u32(&lock->state, LW_FLAG_LOCKED); if (!(old_state & LW_FLAG_LOCKED)) break; /* got lock */ /* and then spin without atomic operations until lock is released */ { SpinDelayStatus delayStatus; init_local_spin_delay(&delayStatus); while (old_state & LW_FLAG_LOCKED) { perform_spin_delay(&delayStatus); old_state = pg_atomic_read_u32(&lock->state); } #ifdef LWLOCK_STATS delays += delayStatus.delays; #endif finish_spin_delay(&delayStatus); } /* * Retry. The lock might obviously already be re-acquired by the time * we're attempting to get it again. */ } #ifdef LWLOCK_STATS lwstats->spin_delay_count += delays; #endif } /* * Unlock the LWLock's wait list. * * Note that it can be more efficient to manipulate flags and release the * locks in a single atomic operation. */ static void LWLockWaitListUnlock(LWLock *lock) { uint32 old_state PG_USED_FOR_ASSERTS_ONLY; old_state = pg_atomic_fetch_and_u32(&lock->state, ~LW_FLAG_LOCKED); Assert(old_state & LW_FLAG_LOCKED); } /* * Wakeup all the lockers that currently have a chance to acquire the lock. */ static void LWLockWakeup(LWLock *lock) { bool new_release_ok; bool wokeup_somebody = false; dlist_head wakeup; dlist_mutable_iter iter; dlist_init(&wakeup); new_release_ok = true; /* lock wait list while collecting backends to wake up */ LWLockWaitListLock(lock); dlist_foreach_modify(iter, &lock->waiters) { PGPROC *waiter = dlist_container(PGPROC, lwWaitLink, iter.cur); if (wokeup_somebody && waiter->lwWaitMode == LW_EXCLUSIVE) continue; dlist_delete(&waiter->lwWaitLink); dlist_push_tail(&wakeup, &waiter->lwWaitLink); if (waiter->lwWaitMode != LW_WAIT_UNTIL_FREE) { /* * Prevent additional wakeups until retryer gets to run. Backends * that are just waiting for the lock to become free don't retry * automatically. */ new_release_ok = false; /* * Don't wakeup (further) exclusive locks. */ wokeup_somebody = true; } /* * Once we've woken up an exclusive lock, there's no point in waking * up anybody else. */ if (waiter->lwWaitMode == LW_EXCLUSIVE) break; } Assert(dlist_is_empty(&wakeup) || pg_atomic_read_u32(&lock->state) & LW_FLAG_HAS_WAITERS); /* unset required flags, and release lock, in one fell swoop */ { uint32 old_state; uint32 desired_state; old_state = pg_atomic_read_u32(&lock->state); while (true) { desired_state = old_state; /* compute desired flags */ if (new_release_ok) desired_state |= LW_FLAG_RELEASE_OK; else desired_state &= ~LW_FLAG_RELEASE_OK; if (dlist_is_empty(&wakeup)) desired_state &= ~LW_FLAG_HAS_WAITERS; desired_state &= ~LW_FLAG_LOCKED; /* release lock */ if (pg_atomic_compare_exchange_u32(&lock->state, &old_state, desired_state)) break; } } /* Awaken any waiters I removed from the queue. */ dlist_foreach_modify(iter, &wakeup) { PGPROC *waiter = dlist_container(PGPROC, lwWaitLink, iter.cur); LOG_LWDEBUG("LWLockRelease", lock, "release waiter"); dlist_delete(&waiter->lwWaitLink); /* * Guarantee that lwWaiting being unset only becomes visible once the * unlink from the link has completed. Otherwise the target backend * could be woken up for other reason and enqueue for a new lock - if * that happens before the list unlink happens, the list would end up * being corrupted. * * The barrier pairs with the LWLockWaitListLock() when enqueuing for * another lock. */ pg_write_barrier(); waiter->lwWaiting = false; PGSemaphoreUnlock(&waiter->sem); } } /* * Add ourselves to the end of the queue. * * NB: Mode can be LW_WAIT_UNTIL_FREE here! */ static void LWLockQueueSelf(LWLock *lock, LWLockMode mode) { /* * If we don't have a PGPROC structure, there's no way to wait. This * should never occur, since MyProc should only be null during shared * memory initialization. */ if (MyProc == NULL) elog(PANIC, "cannot wait without a PGPROC structure"); if (MyProc->lwWaiting) elog(PANIC, "queueing for lock while waiting on another one"); LWLockWaitListLock(lock); /* setting the flag is protected by the spinlock */ pg_atomic_fetch_or_u32(&lock->state, LW_FLAG_HAS_WAITERS); MyProc->lwWaiting = true; MyProc->lwWaitMode = mode; /* LW_WAIT_UNTIL_FREE waiters are always at the front of the queue */ if (mode == LW_WAIT_UNTIL_FREE) dlist_push_head(&lock->waiters, &MyProc->lwWaitLink); else dlist_push_tail(&lock->waiters, &MyProc->lwWaitLink); /* Can release the mutex now */ LWLockWaitListUnlock(lock); #ifdef LOCK_DEBUG pg_atomic_fetch_add_u32(&lock->nwaiters, 1); #endif } /* * Remove ourselves from the waitlist. * * This is used if we queued ourselves because we thought we needed to sleep * but, after further checking, we discovered that we don't actually need to * do so. */ static void LWLockDequeueSelf(LWLock *lock) { bool found = false; dlist_mutable_iter iter; #ifdef LWLOCK_STATS lwlock_stats *lwstats; lwstats = get_lwlock_stats_entry(lock); lwstats->dequeue_self_count++; #endif LWLockWaitListLock(lock); /* * Can't just remove ourselves from the list, but we need to iterate over * all entries as somebody else could have dequeued us. */ dlist_foreach_modify(iter, &lock->waiters) { PGPROC *proc = dlist_container(PGPROC, lwWaitLink, iter.cur); if (proc == MyProc) { found = true; dlist_delete(&proc->lwWaitLink); break; } } if (dlist_is_empty(&lock->waiters) && (pg_atomic_read_u32(&lock->state) & LW_FLAG_HAS_WAITERS) != 0) { pg_atomic_fetch_and_u32(&lock->state, ~LW_FLAG_HAS_WAITERS); } /* XXX: combine with fetch_and above? */ LWLockWaitListUnlock(lock); /* clear waiting state again, nice for debugging */ if (found) MyProc->lwWaiting = false; else { int extraWaits = 0; /* * Somebody else dequeued us and has or will wake us up. Deal with the * superfluous absorption of a wakeup. */ /* * Reset releaseOk if somebody woke us before we removed ourselves - * they'll have set it to false. */ pg_atomic_fetch_or_u32(&lock->state, LW_FLAG_RELEASE_OK); /* * Now wait for the scheduled wakeup, otherwise our ->lwWaiting would * get reset at some inconvenient point later. Most of the time this * will immediately return. */ for (;;) { PGSemaphoreLock(&MyProc->sem); if (!MyProc->lwWaiting) break; extraWaits++; } /* * Fix the process wait semaphore's count for any absorbed wakeups. */ while (extraWaits-- > 0) PGSemaphoreUnlock(&MyProc->sem); } #ifdef LOCK_DEBUG { /* not waiting anymore */ uint32 nwaiters PG_USED_FOR_ASSERTS_ONLY = pg_atomic_fetch_sub_u32(&lock->nwaiters, 1); Assert(nwaiters < MAX_BACKENDS); } #endif } /* * LWLockAcquire - acquire a lightweight lock in the specified mode * * If the lock is not available, sleep until it is. Returns true if the lock * was available immediately, false if we had to sleep. * * Side effect: cancel/die interrupts are held off until lock release. */ bool LWLockAcquire(LWLock *lock, LWLockMode mode) { PGPROC *proc = MyProc; bool result = true; int extraWaits = 0; #ifdef LWLOCK_STATS lwlock_stats *lwstats; lwstats = get_lwlock_stats_entry(lock); #endif AssertArg(mode == LW_SHARED || mode == LW_EXCLUSIVE); PRINT_LWDEBUG("LWLockAcquire", lock, mode); #ifdef LWLOCK_STATS /* Count lock acquisition attempts */ if (mode == LW_EXCLUSIVE) lwstats->ex_acquire_count++; else lwstats->sh_acquire_count++; #endif /* LWLOCK_STATS */ /* * We can't wait if we haven't got a PGPROC. This should only occur * during bootstrap or shared memory initialization. Put an Assert here * to catch unsafe coding practices. */ Assert(!(proc == NULL && IsUnderPostmaster)); /* Ensure we will have room to remember the lock */ if (num_held_lwlocks >= MAX_SIMUL_LWLOCKS) elog(ERROR, "too many LWLocks taken"); /* * Lock out cancel/die interrupts until we exit the code section protected * by the LWLock. This ensures that interrupts will not interfere with * manipulations of data structures in shared memory. */ HOLD_INTERRUPTS(); /* * Loop here to try to acquire lock after each time we are signaled by * LWLockRelease. * * NOTE: it might seem better to have LWLockRelease actually grant us the * lock, rather than retrying and possibly having to go back to sleep. But * in practice that is no good because it means a process swap for every * lock acquisition when two or more processes are contending for the same * lock. Since LWLocks are normally used to protect not-very-long * sections of computation, a process needs to be able to acquire and * release the same lock many times during a single CPU time slice, even * in the presence of contention. The efficiency of being able to do that * outweighs the inefficiency of sometimes wasting a process dispatch * cycle because the lock is not free when a released waiter finally gets * to run. See pgsql-hackers archives for 29-Dec-01. */ for (;;) { bool mustwait; /* * Try to grab the lock the first time, we're not in the waitqueue * yet/anymore. */ mustwait = LWLockAttemptLock(lock, mode); if (!mustwait) { LOG_LWDEBUG("LWLockAcquire", lock, "immediately acquired lock"); break; /* got the lock */ } /* * Ok, at this point we couldn't grab the lock on the first try. We * cannot simply queue ourselves to the end of the list and wait to be * woken up because by now the lock could long have been released. * Instead add us to the queue and try to grab the lock again. If we * succeed we need to revert the queuing and be happy, otherwise we * recheck the lock. If we still couldn't grab it, we know that the * other lock will see our queue entries when releasing since they * existed before we checked for the lock. */ /* add to the queue */ LWLockQueueSelf(lock, mode); /* we're now guaranteed to be woken up if necessary */ mustwait = LWLockAttemptLock(lock, mode); /* ok, grabbed the lock the second time round, need to undo queueing */ if (!mustwait) { LOG_LWDEBUG("LWLockAcquire", lock, "acquired, undoing queue"); LWLockDequeueSelf(lock); break; } /* * Wait until awakened. * * It is possible that we get awakened for a reason other than being * signaled by LWLockRelease. If so, loop back and wait again. Once * we've gotten the LWLock, re-increment the sema by the number of * additional signals received. */ LOG_LWDEBUG("LWLockAcquire", lock, "waiting"); #ifdef LWLOCK_STATS lwstats->block_count++; #endif LWLockReportWaitStart(lock); TRACE_POSTGRESQL_LWLOCK_WAIT_START(T_NAME(lock), T_ID(lock), mode); for (;;) { PGSemaphoreLock(&proc->sem); if (!proc->lwWaiting) break; extraWaits++; } /* Retrying, allow LWLockRelease to release waiters again. */ pg_atomic_fetch_or_u32(&lock->state, LW_FLAG_RELEASE_OK); #ifdef LOCK_DEBUG { /* not waiting anymore */ uint32 nwaiters PG_USED_FOR_ASSERTS_ONLY = pg_atomic_fetch_sub_u32(&lock->nwaiters, 1); Assert(nwaiters < MAX_BACKENDS); } #endif TRACE_POSTGRESQL_LWLOCK_WAIT_DONE(T_NAME(lock), T_ID(lock), mode); LWLockReportWaitEnd(); LOG_LWDEBUG("LWLockAcquire", lock, "awakened"); /* Now loop back and try to acquire lock again. */ result = false; } TRACE_POSTGRESQL_LWLOCK_ACQUIRE(T_NAME(lock), T_ID(lock), mode); /* Add lock to list of locks held by this backend */ held_lwlocks[num_held_lwlocks].lock = lock; held_lwlocks[num_held_lwlocks++].mode = mode; /* * Fix the process wait semaphore's count for any absorbed wakeups. */ while (extraWaits-- > 0) PGSemaphoreUnlock(&proc->sem); return result; } /* * LWLockConditionalAcquire - acquire a lightweight lock in the specified mode * * If the lock is not available, return FALSE with no side-effects. * * If successful, cancel/die interrupts are held off until lock release. */ bool LWLockConditionalAcquire(LWLock *lock, LWLockMode mode) { bool mustwait; AssertArg(mode == LW_SHARED || mode == LW_EXCLUSIVE); PRINT_LWDEBUG("LWLockConditionalAcquire", lock, mode); /* Ensure we will have room to remember the lock */ if (num_held_lwlocks >= MAX_SIMUL_LWLOCKS) elog(ERROR, "too many LWLocks taken"); /* * Lock out cancel/die interrupts until we exit the code section protected * by the LWLock. This ensures that interrupts will not interfere with * manipulations of data structures in shared memory. */ HOLD_INTERRUPTS(); /* Check for the lock */ mustwait = LWLockAttemptLock(lock, mode); if (mustwait) { /* Failed to get lock, so release interrupt holdoff */ RESUME_INTERRUPTS(); LOG_LWDEBUG("LWLockConditionalAcquire", lock, "failed"); TRACE_POSTGRESQL_LWLOCK_CONDACQUIRE_FAIL(T_NAME(lock), T_ID(lock), mode); } else { /* Add lock to list of locks held by this backend */ held_lwlocks[num_held_lwlocks].lock = lock; held_lwlocks[num_held_lwlocks++].mode = mode; TRACE_POSTGRESQL_LWLOCK_CONDACQUIRE(T_NAME(lock), T_ID(lock), mode); } return !mustwait; } /* * LWLockAcquireOrWait - Acquire lock, or wait until it's free * * The semantics of this function are a bit funky. If the lock is currently * free, it is acquired in the given mode, and the function returns true. If * the lock isn't immediately free, the function waits until it is released * and returns false, but does not acquire the lock. * * This is currently used for WALWriteLock: when a backend flushes the WAL, * holding WALWriteLock, it can flush the commit records of many other * backends as a side-effect. Those other backends need to wait until the * flush finishes, but don't need to acquire the lock anymore. They can just * wake up, observe that their records have already been flushed, and return. */ bool LWLockAcquireOrWait(LWLock *lock, LWLockMode mode) { PGPROC *proc = MyProc; bool mustwait; int extraWaits = 0; #ifdef LWLOCK_STATS lwlock_stats *lwstats; lwstats = get_lwlock_stats_entry(lock); #endif Assert(mode == LW_SHARED || mode == LW_EXCLUSIVE); PRINT_LWDEBUG("LWLockAcquireOrWait", lock, mode); /* Ensure we will have room to remember the lock */ if (num_held_lwlocks >= MAX_SIMUL_LWLOCKS) elog(ERROR, "too many LWLocks taken"); /* * Lock out cancel/die interrupts until we exit the code section protected * by the LWLock. This ensures that interrupts will not interfere with * manipulations of data structures in shared memory. */ HOLD_INTERRUPTS(); /* * NB: We're using nearly the same twice-in-a-row lock acquisition * protocol as LWLockAcquire(). Check its comments for details. */ mustwait = LWLockAttemptLock(lock, mode); if (mustwait) { LWLockQueueSelf(lock, LW_WAIT_UNTIL_FREE); mustwait = LWLockAttemptLock(lock, mode); if (mustwait) { /* * Wait until awakened. Like in LWLockAcquire, be prepared for * bogus wakeups. */ LOG_LWDEBUG("LWLockAcquireOrWait", lock, "waiting"); #ifdef LWLOCK_STATS lwstats->block_count++; #endif LWLockReportWaitStart(lock); TRACE_POSTGRESQL_LWLOCK_WAIT_START(T_NAME(lock), T_ID(lock), mode); for (;;) { PGSemaphoreLock(&proc->sem); if (!proc->lwWaiting) break; extraWaits++; } #ifdef LOCK_DEBUG { /* not waiting anymore */ uint32 nwaiters PG_USED_FOR_ASSERTS_ONLY = pg_atomic_fetch_sub_u32(&lock->nwaiters, 1); Assert(nwaiters < MAX_BACKENDS); } #endif TRACE_POSTGRESQL_LWLOCK_WAIT_DONE(T_NAME(lock), T_ID(lock), mode); LWLockReportWaitEnd(); LOG_LWDEBUG("LWLockAcquireOrWait", lock, "awakened"); } else { LOG_LWDEBUG("LWLockAcquireOrWait", lock, "acquired, undoing queue"); /* * Got lock in the second attempt, undo queueing. We need to treat * this as having successfully acquired the lock, otherwise we'd * not necessarily wake up people we've prevented from acquiring * the lock. */ LWLockDequeueSelf(lock); } } /* * Fix the process wait semaphore's count for any absorbed wakeups. */ while (extraWaits-- > 0) PGSemaphoreUnlock(&proc->sem); if (mustwait) { /* Failed to get lock, so release interrupt holdoff */ RESUME_INTERRUPTS(); LOG_LWDEBUG("LWLockAcquireOrWait", lock, "failed"); TRACE_POSTGRESQL_LWLOCK_ACQUIRE_OR_WAIT_FAIL(T_NAME(lock), T_ID(lock), mode); } else { LOG_LWDEBUG("LWLockAcquireOrWait", lock, "succeeded"); /* Add lock to list of locks held by this backend */ held_lwlocks[num_held_lwlocks].lock = lock; held_lwlocks[num_held_lwlocks++].mode = mode; TRACE_POSTGRESQL_LWLOCK_ACQUIRE_OR_WAIT(T_NAME(lock), T_ID(lock), mode); } return !mustwait; } /* * Does the lwlock in its current state need to wait for the variable value to * change? * * If we don't need to wait, and it's because the value of the variable has * changed, store the current value in newval. * * *result is set to true if the lock was free, and false otherwise. */ static bool LWLockConflictsWithVar(LWLock *lock, uint64 *valptr, uint64 oldval, uint64 *newval, bool *result) { bool mustwait; uint64 value; /* * Test first to see if it the slot is free right now. * * XXX: the caller uses a spinlock before this, so we don't need a memory * barrier here as far as the current usage is concerned. But that might * not be safe in general. */ mustwait = (pg_atomic_read_u32(&lock->state) & LW_VAL_EXCLUSIVE) != 0; if (!mustwait) { *result = true; return false; } *result = false; /* * Read value using the lwlock's wait list lock, as we can't generally * rely on atomic 64 bit reads/stores. TODO: On platforms with a way to * do atomic 64 bit reads/writes the spinlock should be optimized away. */ LWLockWaitListLock(lock); value = *valptr; LWLockWaitListUnlock(lock); if (value != oldval) { mustwait = false; *newval = value; } else { mustwait = true; } return mustwait; } /* * LWLockWaitForVar - Wait until lock is free, or a variable is updated. * * If the lock is held and *valptr equals oldval, waits until the lock is * either freed, or the lock holder updates *valptr by calling * LWLockUpdateVar. If the lock is free on exit (immediately or after * waiting), returns true. If the lock is still held, but *valptr no longer * matches oldval, returns false and sets *newval to the current value in * *valptr. * * Note: this function ignores shared lock holders; if the lock is held * in shared mode, returns 'true'. */ bool LWLockWaitForVar(LWLock *lock, uint64 *valptr, uint64 oldval, uint64 *newval) { PGPROC *proc = MyProc; int extraWaits = 0; bool result = false; #ifdef LWLOCK_STATS lwlock_stats *lwstats; lwstats = get_lwlock_stats_entry(lock); #endif PRINT_LWDEBUG("LWLockWaitForVar", lock, LW_WAIT_UNTIL_FREE); /* * Lock out cancel/die interrupts while we sleep on the lock. There is no * cleanup mechanism to remove us from the wait queue if we got * interrupted. */ HOLD_INTERRUPTS(); /* * Loop here to check the lock's status after each time we are signaled. */ for (;;) { bool mustwait; mustwait = LWLockConflictsWithVar(lock, valptr, oldval, newval, &result); if (!mustwait) break; /* the lock was free or value didn't match */ /* * Add myself to wait queue. Note that this is racy, somebody else * could wakeup before we're finished queuing. NB: We're using nearly * the same twice-in-a-row lock acquisition protocol as * LWLockAcquire(). Check its comments for details. The only * difference is that we also have to check the variable's values when * checking the state of the lock. */ LWLockQueueSelf(lock, LW_WAIT_UNTIL_FREE); /* * Set RELEASE_OK flag, to make sure we get woken up as soon as the * lock is released. */ pg_atomic_fetch_or_u32(&lock->state, LW_FLAG_RELEASE_OK); /* * We're now guaranteed to be woken up if necessary. Recheck the lock * and variables state. */ mustwait = LWLockConflictsWithVar(lock, valptr, oldval, newval, &result); /* Ok, no conflict after we queued ourselves. Undo queueing. */ if (!mustwait) { LOG_LWDEBUG("LWLockWaitForVar", lock, "free, undoing queue"); LWLockDequeueSelf(lock); break; } /* * Wait until awakened. * * It is possible that we get awakened for a reason other than being * signaled by LWLockRelease. If so, loop back and wait again. Once * we've gotten the LWLock, re-increment the sema by the number of * additional signals received. */ LOG_LWDEBUG("LWLockWaitForVar", lock, "waiting"); #ifdef LWLOCK_STATS lwstats->block_count++; #endif LWLockReportWaitStart(lock); TRACE_POSTGRESQL_LWLOCK_WAIT_START(T_NAME(lock), T_ID(lock), LW_EXCLUSIVE); for (;;) { PGSemaphoreLock(&proc->sem); if (!proc->lwWaiting) break; extraWaits++; } #ifdef LOCK_DEBUG { /* not waiting anymore */ uint32 nwaiters PG_USED_FOR_ASSERTS_ONLY = pg_atomic_fetch_sub_u32(&lock->nwaiters, 1); Assert(nwaiters < MAX_BACKENDS); } #endif TRACE_POSTGRESQL_LWLOCK_WAIT_DONE(T_NAME(lock), T_ID(lock), LW_EXCLUSIVE); LWLockReportWaitEnd(); LOG_LWDEBUG("LWLockWaitForVar", lock, "awakened"); /* Now loop back and check the status of the lock again. */ } TRACE_POSTGRESQL_LWLOCK_ACQUIRE(T_NAME(lock), T_ID(lock), LW_EXCLUSIVE); /* * Fix the process wait semaphore's count for any absorbed wakeups. */ while (extraWaits-- > 0) PGSemaphoreUnlock(&proc->sem); /* * Now okay to allow cancel/die interrupts. */ RESUME_INTERRUPTS(); return result; } /* * LWLockUpdateVar - Update a variable and wake up waiters atomically * * Sets *valptr to 'val', and wakes up all processes waiting for us with * LWLockWaitForVar(). Setting the value and waking up the processes happen * atomically so that any process calling LWLockWaitForVar() on the same lock * is guaranteed to see the new value, and act accordingly. * * The caller must be holding the lock in exclusive mode. */ void LWLockUpdateVar(LWLock *lock, uint64 *valptr, uint64 val) { dlist_head wakeup; dlist_mutable_iter iter; PRINT_LWDEBUG("LWLockUpdateVar", lock, LW_EXCLUSIVE); dlist_init(&wakeup); LWLockWaitListLock(lock); Assert(pg_atomic_read_u32(&lock->state) & LW_VAL_EXCLUSIVE); /* Update the lock's value */ *valptr = val; /* * See if there are any LW_WAIT_UNTIL_FREE waiters that need to be woken * up. They are always in the front of the queue. */ dlist_foreach_modify(iter, &lock->waiters) { PGPROC *waiter = dlist_container(PGPROC, lwWaitLink, iter.cur); if (waiter->lwWaitMode != LW_WAIT_UNTIL_FREE) break; dlist_delete(&waiter->lwWaitLink); dlist_push_tail(&wakeup, &waiter->lwWaitLink); } /* We are done updating shared state of the lock itself. */ LWLockWaitListUnlock(lock); /* * Awaken any waiters I removed from the queue. */ dlist_foreach_modify(iter, &wakeup) { PGPROC *waiter = dlist_container(PGPROC, lwWaitLink, iter.cur); dlist_delete(&waiter->lwWaitLink); /* check comment in LWLockWakeup() about this barrier */ pg_write_barrier(); waiter->lwWaiting = false; PGSemaphoreUnlock(&waiter->sem); } } /* * LWLockRelease - release a previously acquired lock */ void LWLockRelease(LWLock *lock) { LWLockMode mode; uint32 oldstate; bool check_waiters; int i; /* * Remove lock from list of locks held. Usually, but not always, it will * be the latest-acquired lock; so search array backwards. */ for (i = num_held_lwlocks; --i >= 0;) if (lock == held_lwlocks[i].lock) break; if (i < 0) elog(ERROR, "lock %s %d is not held", T_NAME(lock), T_ID(lock)); mode = held_lwlocks[i].mode; num_held_lwlocks--; for (; i < num_held_lwlocks; i++) held_lwlocks[i] = held_lwlocks[i + 1]; PRINT_LWDEBUG("LWLockRelease", lock, mode); /* * Release my hold on lock, after that it can immediately be acquired by * others, even if we still have to wakeup other waiters. */ if (mode == LW_EXCLUSIVE) oldstate = pg_atomic_sub_fetch_u32(&lock->state, LW_VAL_EXCLUSIVE); else oldstate = pg_atomic_sub_fetch_u32(&lock->state, LW_VAL_SHARED); /* nobody else can have that kind of lock */ Assert(!(oldstate & LW_VAL_EXCLUSIVE)); /* * We're still waiting for backends to get scheduled, don't wake them up * again. */ if ((oldstate & (LW_FLAG_HAS_WAITERS | LW_FLAG_RELEASE_OK)) == (LW_FLAG_HAS_WAITERS | LW_FLAG_RELEASE_OK) && (oldstate & LW_LOCK_MASK) == 0) check_waiters = true; else check_waiters = false; /* * As waking up waiters requires the spinlock to be acquired, only do so * if necessary. */ if (check_waiters) { /* XXX: remove before commit? */ LOG_LWDEBUG("LWLockRelease", lock, "releasing waiters"); LWLockWakeup(lock); } TRACE_POSTGRESQL_LWLOCK_RELEASE(T_NAME(lock), T_ID(lock)); /* * Now okay to allow cancel/die interrupts. */ RESUME_INTERRUPTS(); } /* * LWLockReleaseClearVar - release a previously acquired lock, reset variable */ void LWLockReleaseClearVar(LWLock *lock, uint64 *valptr, uint64 val) { LWLockWaitListLock(lock); /* * Set the variable's value before releasing the lock, that prevents race * a race condition wherein a new locker acquires the lock, but hasn't yet * set the variables value. */ *valptr = val; LWLockWaitListUnlock(lock); LWLockRelease(lock); } /* * LWLockReleaseAll - release all currently-held locks * * Used to clean up after ereport(ERROR). An important difference between this * function and retail LWLockRelease calls is that InterruptHoldoffCount is * unchanged by this operation. This is necessary since InterruptHoldoffCount * has been set to an appropriate level earlier in error recovery. We could * decrement it below zero if we allow it to drop for each released lock! */ void LWLockReleaseAll(void) { while (num_held_lwlocks > 0) { HOLD_INTERRUPTS(); /* match the upcoming RESUME_INTERRUPTS */ LWLockRelease(held_lwlocks[num_held_lwlocks - 1].lock); } } /* * LWLockHeldByMe - test whether my process currently holds a lock * * This is meant as debug support only. We currently do not distinguish * whether the lock is held shared or exclusive. */ bool LWLockHeldByMe(LWLock *l) { int i; for (i = 0; i < num_held_lwlocks; i++) { if (held_lwlocks[i].lock == l) return true; } return false; }