---------------------------------------------------------------------------- -- -- The Madge Ringswitch MIB Madge Networks Ltd -- -- Version 2.5 July 1995 -- ---------------------------------------------------------------------------- -- -- Overview -- -------- -- The Madge Ringswitch MIB defines enterprise specific objects to allow the -- management of Madge Smart Ringswitches. -- -- The Madge Ringswitch MIB contains the following groups: -- -- ringswitchBase - Ringswitch global information -- ringswitchPort - Ringswitch per-port information -- ringswitchSR - Source routing global information -- ringswitchLCD - LCD message information -- ringswitchLAN - Virtual LAN information -- -- Change History -- -------------- -- 1.2 TW/BP/HDW 30-05-95 First significant draft -- 2.0 TW ??-??-?? Added fan speeds, RPS enable, cut-thru -- disable, wider counters -- 2.1 TW ??-??-?? Added port failure trap -- 2.2 TW ??-??-?? Added Smart Broadcast Control variable -- 2.3 TW ??-??-?? Added bridge test failure trap -- 2.4 HDW 12-07-95 Added FDDI support to ringswitchPort -- 2.5 HDW 02-11-95 Changed "SYNTAX Integer" to "SYNTAX -- INTEGER" in fan speed definitions -- ---------------------------------------------------------------------------- MADGERSW-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 PhysAddress FROM RFC1213-MIB; -- Data Types DisplayString ::= OCTET STRING -- -- Octet String encoding of a 48 bit integer, transmitted Most -- Significant Byte first -- INTEGER48 ::= OCTET STRING (SIZE (6)) -- the Ringswitch MIB madge OBJECT IDENTIFIER ::= { enterprises 494 } ringswitch OBJECT IDENTIFIER ::= { madge 4 } -- groups in the Ringswitch MIB ringswitchBase OBJECT IDENTIFIER ::= { ringswitch 1 } ringswitchPort OBJECT IDENTIFIER ::= { ringswitch 2 } ringswitchSR OBJECT IDENTIFIER ::= { ringswitch 3 } ringswitchLCD OBJECT IDENTIFIER ::= { ringswitch 4 } ringswitchLAN OBJECT IDENTIFIER ::= { ringswitch 5 } ---------------------------------------------------------------------------- -- the ringswitchBase group ringswitchBasePSFanSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of revolutions per minute being reported by the fan internal to the system power supply. If this value is read as zero, the fan is no longer operating" ::= { ringswitchBase 1 } ringswitchBaseExtFanSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of revolutions per minute being reported by the external system fan. If this value is read as zero, the fan is no longer operating" ::= { ringswitchBase 2 } ringswitchBaseRipSapSuppression OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this variable is set to enable the system will only forward broadcast-addressed IPX RIP and SAP Response frames to those ports that have recently sourced such a frame. This reduces the number of gratuitous frames sent out on LANs that only have IPX workstations attached. A value of disable causes no special action to be taken for such frames." ::= { ringswitchBase 3 } ringswitchBaseAREConversion OBJECT-TYPE SYNTAX INTEGER { enable-first (1), enable-all (2), enable-bcast-first (3), enable-bcast-all (4), disable (5) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable controls the action taken when forwarding All Routes Explorer frames. enable-first: convert all ARE frames with a RIF length of 2 to STE frames. enable-all: convert all ARE frames to STE frames. enable-bcast-first: convert all ARE frames with the broadcast destination address, with a RIF length of 2 to STE frames. enable-bcast-all: convert all ARE frames with the broadcast destination address to STE frames. disable: follow normal forwarding rules for ARE frames." ::= { ringswitchBase 4 } ---------------------------------------------------------------------------- -- the ringswitchPort group ringswitchPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RingswitchPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains general port information." ::= { ringswitchPort 1 } ringswitchPortEntry OBJECT-TYPE SYNTAX RingswitchPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { ringswitchPortNum } ::= { ringswitchPortTable 1 } RingswitchPortEntry ::= SEQUENCE { ringswitchPortNum INTEGER, ringswitchPortRingStatus INTEGER, ringswitchPortAdapterStatus INTEGER, ringswitchPortMediaType INTEGER, ringswitchPortIfMode INTEGER, ringswitchPortRingSpeed INTEGER, ringswitchPortTestState INTEGER, ringswitchPortTestError INTEGER, ringswitchPortTestPhase INTEGER, ringswitchPortSummary INTEGER, ringswitchPortAddress PhysAddress, ringswitchPortLAA PhysAddress, ringswitchPortStationType INTEGER, ringswitchPortRPSEnable INTEGER, ringswitchPortCutThruEnable INTEGER, ringswitchPortInOctets INTEGER48, ringswitchPortOutOctets INTEGER48, ringswitchPortSpecInFrames INTEGER48, ringswitchPortSpecOutFrames INTEGER48, ringswitchPortApeInFrames INTEGER48, ringswitchPortApeOutFrames INTEGER48, ringswitchPortSteInFrames INTEGER48, ringswitchPortSteOutFrames INTEGER48 } ringswitchPortNum OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the port for which this entry contains Ringswitch management information." ::= { ringswitchPortEntry 1 } ringswitchPortRingStatus OBJECT-TYPE SYNTAX INTEGER { normal (1), single (2), beaconing (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the ring to which this port is connected." ::= { ringswitchPortEntry 2 } ringswitchPortAdapterStatus OBJECT-TYPE SYNTAX INTEGER { open (1), closed (2), opening (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the adapter used by this port." ::= { ringswitchPortEntry 3 } ringswitchPortMediaType OBJECT-TYPE SYNTAX INTEGER { tr-copper (1), tr-fiber (2), fddi-fiber (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Media type of the port." ::= { ringswitchPortEntry 4 } ringswitchPortIfMode OBJECT-TYPE SYNTAX INTEGER { node (1), concentrator (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Node or concentrator status of the port." ::= { ringswitchPortEntry 5 } ringswitchPortRingSpeed OBJECT-TYPE SYNTAX INTEGER { four (1), sixteen (2), hundred (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Speed of the ring to which this port is connected." ::= { ringswitchPortEntry 6 } ringswitchPortTestState OBJECT-TYPE SYNTAX INTEGER { disabled (1), running (2), failed (3), ok (4), unknown (5) } ACCESS read-only STATUS mandatory DESCRIPTION "Current state of the bridge test." ::= { ringswitchPortEntry 7 } ringswitchPortTestError OBJECT-TYPE SYNTAX INTEGER { no-error (1), same-ring (2), duplicate-ring (3), fail-nb (4), bad-rnum (5), fail-b (6) } ACCESS read-only STATUS mandatory DESCRIPTION "Result of the bridge test." ::= { ringswitchPortEntry 8 } ringswitchPortTestPhase OBJECT-TYPE SYNTAX INTEGER { not-running (1), same-ring (2), routed (3), broadcast (4), success (5) } ACCESS read-only STATUS mandatory DESCRIPTION "Current phase of the bridge test." ::= { ringswitchPortEntry 9 } ringswitchPortSummary OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is a three octet field which packs some of the port attributes into a single mib entry. Each nibble represents a different attribute of the port: ifAdminStatus (most significant), ringswitchPortRingStatus, ringswitchPortAdapterStatus, ringswitchPortMediaType, ringswitchPortIfMode, ringswitchPortRingSpeed, ringswitchPortTestState, ringswitchPortTestError (least significant)" ::= { ringswitchPortEntry 10 } ringswitchPortAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The hard wired address of the port." ::= { ringswitchPortEntry 11 } ringswitchPortLAA OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "The locally administered address of the port." ::= { ringswitchPortEntry 12 } ringswitchPortStationType OBJECT-TYPE SYNTAX INTEGER { anything (1), workstations (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Workstations-only status of the port; if this is limited, the port only has workstations on it, and broadcast frames received on this port will not be transmitted on other limited ports." ::= { ringswitchPortEntry 13 } ringswitchPortRPSEnable OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables or disables the Ring Parameter Server function on the port. If this variable is set to enabled, the port will enable the RPS functional address, and respond to Request Parameters MAC frames, supplying the port's segment number in the response." ::= { ringswitchPortEntry 14 } ringswitchPortCutThruEnable OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables or disables cut-through switching on the port. In some circumstances (e.g., 4 to 16 MB switching), cut-through will always be disabled, irrespective of the state of this variable." ::= { ringswitchPortEntry 15 } ringswitchPortInOctets OBJECT-TYPE SYNTAX INTEGER48 ACCESS read-only STATUS mandatory DESCRIPTION "48 bit version of the interface MIB counter ifInOctets." ::= { ringswitchPortEntry 16 } ringswitchPortOutOctets OBJECT-TYPE SYNTAX INTEGER48 ACCESS read-only STATUS mandatory DESCRIPTION "48 bit version of the interface MIB counter ifOutOctets." ::= { ringswitchPortEntry 17 } ringswitchPortSpecInFrames OBJECT-TYPE SYNTAX INTEGER48 ACCESS read-only STATUS mandatory DESCRIPTION "48 bit version of the Bridge MIB counter srPortSpecInFrames." ::= { ringswitchPortEntry 18 } ringswitchPortSpecOutFrames OBJECT-TYPE SYNTAX INTEGER48 ACCESS read-only STATUS mandatory DESCRIPTION "48 bit version of the Bridge MIB counter srPortSpecOutFrames." ::= { ringswitchPortEntry 19 } ringswitchPortApeInFrames OBJECT-TYPE SYNTAX INTEGER48 ACCESS read-only STATUS mandatory DESCRIPTION "48 bit version of the Bridge MIB counter srPortApeInFrames." ::= { ringswitchPortEntry 20 } ringswitchPortApeOutFrames OBJECT-TYPE SYNTAX INTEGER48 ACCESS read-only STATUS mandatory DESCRIPTION "48 bit version of the Bridge MIB counter srPortApeOutFrames." ::= { ringswitchPortEntry 21 } ringswitchPortSteInFrames OBJECT-TYPE SYNTAX INTEGER48 ACCESS read-only STATUS mandatory DESCRIPTION "48 bit version of the Bridge MIB counter srPortSteInFrames." ::= { ringswitchPortEntry 22 } ringswitchPortSteOutFrames OBJECT-TYPE SYNTAX INTEGER48 ACCESS read-only STATUS mandatory DESCRIPTION "48 bit version of the Bridge MIB counter srPortSteOutFrames." ::= { ringswitchPortEntry 23 } ---------------------------------------------------------------------------- -- the ringswitchSR group ringswitchSRAdminState OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of source routing; allows source routing to be enabled or disabled for the whole Ringswitch" ::= { ringswitchSR 1 } ringswitchSROperState OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The actual state of source routing. If ringswitchSRAdminState is 'disabled' then this state will be inactive. If ringswitchSRAdminState is 'enabled' then this state should be 'active', but if for some reason the Ringswitch is unable to perform source routing then this state will be 'inactive'." ::= { ringswitchSR 2 } ---------------------------------------------------------------------------- -- the ringswitchLCD group -- LCDText is a 50 byte octet string, containing the first line of -- the LCD (24 bytes), a carriage return (1 byte), the second line -- of the LCD (24 bytes) and a null character (1 byte). LCDText ::= OCTET STRING (SIZE (50)) ringswitchLCDTotalDisplays OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The total number of displays on the Ringswitch." ::= { ringswitchLCD 1 } ringswitchLCDCurrentDisplay OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The number of the display that the Ringswitch is currently showing." ::= { ringswitchLCD 2 } ringswitchLCDCurrentMsgText OBJECT-TYPE SYNTAX LCDText ACCESS read-only STATUS mandatory DESCRIPTION "The actual lcd message text, including a carriage return after the first line, and a null character after the second line." ::= { ringswitchLCD 3 } ringswitchLCDTable OBJECT-TYPE SYNTAX SEQUENCE OF RingswitchLCDTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains all of the lcd messages that could be displayed by the Ringswitch if the user were to flick the paddle switch." ::= { ringswitchLCD 4 } ringswitchLCDTableEntry OBJECT-TYPE SYNTAX RingswitchLCDTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Arguments and message number details for each LCD entry." INDEX { ringswitchLCDNum } ::= { ringswitchLCDTable 1 } RingswitchLCDTableEntry ::= SEQUENCE { ringswitchLCDNum INTEGER, ringswitchLCDMsgText LCDText } ringswitchLCDNum OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The lcd number of the lcd for which this entry contains display details." ::= { ringswitchLCDTableEntry 1 } ringswitchLCDMsgText OBJECT-TYPE SYNTAX LCDText ACCESS read-only STATUS mandatory DESCRIPTION "The actual lcd message text, including a carriage return after the first line, and a null character after the second line." ::= { ringswitchLCDTableEntry 2 } ---------------------------------------------------------------------------- -- the ringswitchLAN group ringswitchLANTable OBJECT-TYPE SYNTAX SEQUENCE OF RingswitchLANEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains virtual LAN information configured into the Ringswitch by the network administrator." ::= { ringswitchLAN 1 } ringswitchLANEntry OBJECT-TYPE SYNTAX RingswitchLANEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Name and status information associated with each virtual LAN entry." INDEX { ringswitchLANIndex } ::= { ringswitchLANTable 1 } RingswitchLANEntry ::= SEQUENCE { ringswitchLANIndex INTEGER, ringswitchLANName DisplayString, ringswitchLANPermeable INTEGER, ringswitchLANStatus INTEGER } ringswitchLANIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The virtual LAN number for which this entry contains virtual LAN details." ::= { ringswitchLANEntry 1 } ringswitchLANName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The name that the administrator has given this virtual LAN." ::= { ringswitchLANEntry 2 } ringswitchLANPermeable OBJECT-TYPE SYNTAX INTEGER { impermeable (1), permeable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "In an 'impermeable' group, broadcast frames which were received on a port in the group, but were not originated in the group, are discarded. In a 'permeable' group, such frames are transmitted on the other ports in the group." ::= { ringswitchLANEntry 3 } ringswitchLANStatus OBJECT-TYPE SYNTAX INTEGER { valid (1), invalid (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The current status of this virtual LAN, a status of 'invalid' indicates that the virtual LAN's associated name and ring list are meaningless until the group is validated." ::= { ringswitchLANEntry 4 } ringswitchLANRingTable OBJECT-TYPE SYNTAX SEQUENCE OF RingswitchLANRingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains the rings associated with a virtual LAN that has been configured into the Ringswitch by the network administrator." ::= { ringswitchLAN 2 } ringswitchLANRingEntry OBJECT-TYPE SYNTAX RingswitchLANRingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Name and status information associated with each virtual LAN ring table entry." INDEX { ringswitchLANRingGroup, ringswitchLANRingIndex } ::= { ringswitchLANRingTable 1 } RingswitchLANRingEntry ::= SEQUENCE { ringswitchLANRingGroup INTEGER, ringswitchLANRingIndex INTEGER, ringswitchLANRingNum INTEGER, ringswitchLANRingStatus INTEGER } ringswitchLANRingGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The virtual LAN index for which this entry contains virtual LAN ring details." ::= { ringswitchLANRingEntry 1 } ringswitchLANRingIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ring index for which this entry contains virtual LAN ring details." ::= { ringswitchLANRingEntry 2 } ringswitchLANRingNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The ring number contained in the virtual LAN." ::= { ringswitchLANRingEntry 3 } ringswitchLANRingStatus OBJECT-TYPE SYNTAX INTEGER { valid (1), invalid (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The current status of this virtual LAN ring entry, a status of 'invalid' indicates that the ring entry is not in use and the associated ring number is meaningless." ::= { ringswitchLANRingEntry 4 } -- -- Madge Ringswitch specific traps -- fanPSSpeedFailed TRAP-TYPE ENTERPRISE ringswitch VARIABLES { ringswitchBasePSFanSpeed } DESCRIPTION "This trap is sent when the Power Supply fan has failed." ::= 1 fanExtSpeedFailed TRAP-TYPE ENTERPRISE ringswitch VARIABLES { ringswitchBaseExtFanSpeed } DESCRIPTION "This trap is sent when the external fan has failed." ::= 2 portFailed TRAP-TYPE ENTERPRISE ringswitch VARIABLES { ringswitchPortAdapterStatus } DESCRIPTION "This trap is sent when a port has auto-closed or failed to open." ::= 3 brTestFailed TRAP-TYPE ENTERPRISE ringswitch VARIABLES { ringswitchPortTestError } DESCRIPTION "This trap is sent when the bridge test on a port fails." ::= 4 END