--MibName=SWITCH-CPUPRO-MIB
-- *****************************************************************
-- RAISECOM-CPUPRO-MIB.mib:  Raisecom CPUPro MIB file
--
-- Apr 2010, wangzhongfei huochao
--
-- Copyright (c) 1994-2006 by Raisecom Technology Co., Ltd.
-- All rights reserved.
--
-- *****************************************************************

-- *****************************************************************
-- Modi Report：Format: <number>, <time>, <author>, <desc>
-- 01,20110815,huochao,将节点rcCpuProPacketIndex的取值"all"去掉，这种设计不合理
--                     "all"的配置和获取可以通过遍历的方式进行
-- *****************************************************************


SWITCH-CPUPRO-MIB  DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, NOTIFICATION-TYPE,
    OBJECT-TYPE                         FROM SNMPv2-SMI

    MODULE-COMPLIANCE,
    NOTIFICATION-GROUP,
    OBJECT-GROUP                        FROM SNMPv2-CONF  
      
    EnableVar                           FROM SWITCH-TC
    iscomSwitch	                        FROM RAISECOM-BASE-MIB;
   

rcCpuPro MODULE-IDENTITY
        LAST-UPDATED    "201004010000Z"
        ORGANIZATION    "Raisecom Technology Co., Ltd."
        CONTACT-INFO
                "Raisecom Systems

                Postal: No.617/619 Haitai Tower,
                229 Fourth North Loop Middle Road,
                Haidian District, Beijing, PRC

                Tel: +86-10-82884499

                E-mail: wangzhongfei@raisecom.com"
        DESCRIPTION
         "The MIB module is for configuration of Cpu Protection
         feature."
        REVISION   "201004010000Z"
        DESCRIPTION
            "The initial revision of this MIB module."
        ::= { iscomSwitch 60 }

------------------------------------------------------------------------------
-- define groups in rcCpuPro
------------------------------------------------------------------------------
    rcCpuProGroup   OBJECT IDENTIFIER ::= { rcCpuPro 1 }

------------------------------------------------------------------------------
-- begin rcCpuProGroup  rcCpuProPortTable--
------------------------------------------------------------------------
rcCpuProPortTable OBJECT-TYPE
        SYNTAX SEQUENCE OF RcCpuProPortEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A table provides the status of the cpu protection in per port."
        ::= { rcCpuProGroup 1 }  
        
rcCpuProPacketTable OBJECT-TYPE
        SYNTAX SEQUENCE OF RcCpuProPacketEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A table provides the mechanism to control cpu protection with per packet type."
        ::= { rcCpuProGroup 2 }


rcCpuProPortEntry OBJECT-TYPE
        SYNTAX RcCpuProPortEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Table entry for cpu protection status in per port."
        INDEX { rcCpuProPortIndex, rcCpuProPacketIndex}
        ::= { rcCpuProPortTable 1 }

RcCpuProPortEntry ::= SEQUENCE
    {
        rcCpuProPortIndex          INTEGER,
        rcCpuProPortPacketEnable   EnableVar,
        rcCpuProPortPacketAttackStatus  INTEGER,
        rcCpuProPortPacketAttackedCount Counter
    }

rcCpuProPortIndex OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An index that uniquely identifies a configuration about cpu pro.
            Eg:for iscom2826/2826e,the value range is from 1 to 26, for iscom2812gf,
            from 1 to 12, for iscom2828f,from 1 to 28, for iscom2852,from 1 to 52,and so on."
        ::= { rcCpuProPortEntry 1}

        
rcCpuProPortPacketEnable OBJECT-TYPE 
        SYNTAX EnableVar
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Enable or disable cpu pro for arp, bpdu or icmp flood for the port"  
        DEFVAL {disable}
        ::= { rcCpuProPortEntry 2 }
        
rcCpuProPortPacketAttackStatus OBJECT-TYPE 
        SYNTAX INTEGER{
                      attacking(1),
                      not-attacking(2)
                      }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This object specifies if the packet is attacking the cpu."  
        ::= { rcCpuProPortEntry 3 }
        
rcCpuProPortPacketAttackedCount OBJECT-TYPE 
        SYNTAX Counter
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This object specifies the totle number of special packet attacked the cpu."  
        ::= { rcCpuProPortEntry 4 }   

rcCpuProPacketEntry OBJECT-TYPE
        SYNTAX RcCpuProPacketEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Table entry for cpu protection config based on port."
        INDEX {rcCpuProPacketIndex}
        ::= { rcCpuProPacketTable 1 }   

RcCpuProPacketEntry ::= SEQUENCE
    {
        rcCpuProPacketIndex        INTEGER,
        rcCpuProPacketInterval     INTEGER,
        rcCpuProPacketHigh         INTEGER,
        rcCpuProPacketLow          INTEGER,
        rcCpuProPacketAction       INTEGER     
    }

        
rcCpuProPacketIndex OBJECT-TYPE 
        SYNTAX  INTEGER{
                        bpdu(1),
                        arp(2),
                        icmp(3)
                        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This object specifies which packet type the entry information belongs to, under the port."  
        ::= { rcCpuProPacketEntry 1 }    
        
rcCpuProPacketInterval OBJECT-TYPE 
        SYNTAX  INTEGER(0..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "This object specifies the sample interval for special packet."  
        ::= { rcCpuProPacketEntry 2 }  
         
rcCpuProPacketHigh OBJECT-TYPE 
        SYNTAX  INTEGER(2..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "If the number of packets received exceeds the high threshold value, the relative packet will be denied."  
        ::= { rcCpuProPacketEntry 3 }   
       
rcCpuProPacketLow OBJECT-TYPE 
        SYNTAX  INTEGER(1..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "After the cpu was attacked, If the number of packets received is under the low threshold value, 
             the relative packet will be received not denied."  
        ::= { rcCpuProPacketEntry 4 }  
         
rcCpuProPacketAction OBJECT-TYPE 
        SYNTAX  INTEGER{
                        shutdown(1),
                        filter(2),
                        deny(3)
                        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "This object specifies which atction the CPUpro will take after be attacked."  
        ::= { rcCpuProPacketEntry 5 }   
       
END