package consul import ( "fmt" "net" "os" "time" "github.com/hashicorp/memberlist" "github.com/hashicorp/raft" "github.com/hashicorp/serf/serf" "golang.org/x/time/rate" "github.com/hashicorp/consul/agent/checks" "github.com/hashicorp/consul/agent/structs" libserf "github.com/hashicorp/consul/lib/serf" "github.com/hashicorp/consul/tlsutil" "github.com/hashicorp/consul/types" "github.com/hashicorp/consul/version" ) const ( DefaultDC = "dc1" DefaultRPCPort = 8300 DefaultLANSerfPort = 8301 DefaultWANSerfPort = 8302 // DefaultRaftMultiplier is used as a baseline Raft configuration that // will be reliable on a very basic server. See docs/install/performance.html // for information on how this value was obtained. DefaultRaftMultiplier uint = 5 // MaxRaftMultiplier is a fairly arbitrary upper bound that limits the // amount of performance detuning that's possible. MaxRaftMultiplier uint = 10 ) var ( DefaultRPCAddr = &net.TCPAddr{IP: net.ParseIP("0.0.0.0"), Port: DefaultRPCPort} // ProtocolVersionMap is the mapping of Consul protocol versions // to Serf protocol versions. We mask the Serf protocols using // our own protocol version. protocolVersionMap map[uint8]uint8 ) func init() { protocolVersionMap = map[uint8]uint8{ 1: 4, 2: 4, 3: 4, } } // (Enterprise-only) NetworkSegment is the address and port configuration // for a network segment. type NetworkSegment struct { Name string Bind string Port int Advertise string RPCAddr *net.TCPAddr SerfConfig *serf.Config } // Config is used to configure the server type Config struct { // Bootstrap mode is used to bring up the first Consul server. // It is required so that it can elect a leader without any // other nodes being present Bootstrap bool // BootstrapExpect mode is used to automatically bring up a collection of // Consul servers. This can be used to automatically bring up a collection // of nodes. BootstrapExpect int // Datacenter is the datacenter this Consul server represents. Datacenter string // PrimaryDatacenter is the authoritative datacenter for features like ACLs // and Connect. PrimaryDatacenter string // DataDir is the directory to store our state in. DataDir string // DefaultQueryTime is the amount of time a blocking query will wait before // Consul will force a response. This value can be overridden by the 'wait' // query parameter. DefaultQueryTime time.Duration // MaxQueryTime is the maximum amount of time a blocking query can wait // before Consul will force a response. Consul applies jitter to the wait // time. The jittered time will be capped to MaxQueryTime. MaxQueryTime time.Duration // DevMode is used to enable a development server mode. DevMode bool // NodeID is a unique identifier for this node across space and time. NodeID types.NodeID // Node name is the name we use to advertise. Defaults to hostname. NodeName string // Domain is the DNS domain for the records. Defaults to "consul." Domain string // RaftConfig is the configuration used for Raft in the local DC RaftConfig *raft.Config // (Enterprise-only) ReadReplica is used to prevent this server from being added // as a voting member of the Raft cluster. ReadReplica bool // NotifyListen is called after the RPC listener has been configured. // RPCAdvertise will be set to the listener address if it hasn't been // configured at this point. NotifyListen func() // RPCAddr is the RPC address used by Consul. This should be reachable // by the WAN and LAN RPCAddr *net.TCPAddr // RPCAdvertise is the address that is advertised to other nodes for // the RPC endpoint. This can differ from the RPC address, if for example // the RPCAddr is unspecified "0.0.0.0:8300", but this address must be // reachable. If RPCAdvertise is nil then it will be set to the Listener // address after the listening socket is configured. RPCAdvertise *net.TCPAddr // RPCSrcAddr is the source address for outgoing RPC connections. RPCSrcAddr *net.TCPAddr // (Enterprise-only) The network segment this agent is part of. Segment string // (Enterprise-only) Segments is a list of network segments for a server to // bind on. Segments []NetworkSegment // SerfLANConfig is the configuration for the intra-dc serf SerfLANConfig *serf.Config // SerfWANConfig is the configuration for the cross-dc serf SerfWANConfig *serf.Config // SerfFloodInterval controls how often we attempt to flood local Serf // Consul servers into the global areas (WAN and user-defined areas in // Consul Enterprise). SerfFloodInterval time.Duration // ReconcileInterval controls how often we reconcile the strongly // consistent store with the Serf info. This is used to handle nodes // that are force removed, as well as intermittent unavailability during // leader election. ReconcileInterval time.Duration // ProtocolVersion is the protocol version to speak. This must be between // ProtocolVersionMin and ProtocolVersionMax. ProtocolVersion uint8 // VerifyIncoming is used to verify the authenticity of incoming connections. // This means that TCP requests are forbidden, only allowing for TLS. TLS connections // must match a provided certificate authority. This can be used to force client auth. VerifyIncoming bool // VerifyOutgoing is used to force verification of the authenticity of outgoing connections. // This means that TLS requests are used, and TCP requests are not made. TLS connections // must match a provided certificate authority. VerifyOutgoing bool // UseTLS is used to enable TLS for outgoing connections to other TLS-capable Consul // servers. This doesn't imply any verification, it only enables TLS if possible. UseTLS bool // VerifyServerHostname is used to enable hostname verification of servers. This // ensures that the certificate presented is valid for server... // This prevents a compromised client from being restarted as a server, and then // intercepting request traffic as well as being added as a raft peer. This should be // enabled by default with VerifyOutgoing, but for legacy reasons we cannot break // existing clients. VerifyServerHostname bool // CAFile is a path to a certificate authority file. This is used with VerifyIncoming // or VerifyOutgoing to verify the TLS connection. CAFile string // CAPath is a path to a directory of certificate authority files. This is used with // VerifyIncoming or VerifyOutgoing to verify the TLS connection. CAPath string // CertFile is used to provide a TLS certificate that is used for serving TLS connections. // Must be provided to serve TLS connections. CertFile string // KeyFile is used to provide a TLS key that is used for serving TLS connections. // Must be provided to serve TLS connections. KeyFile string // ServerName is used with the TLS certificate to ensure the name we // provide matches the certificate ServerName string // TLSMinVersion is used to set the minimum TLS version used for TLS connections. TLSMinVersion string // TLSCipherSuites is used to specify the list of supported ciphersuites. TLSCipherSuites []uint16 // TLSPreferServerCipherSuites specifies whether to prefer the server's ciphersuite // over the client ciphersuites. TLSPreferServerCipherSuites bool // RejoinAfterLeave controls our interaction with Serf. // When set to false (default), a leave causes a Consul to not rejoin // the cluster until an explicit join is received. If this is set to // true, we ignore the leave, and rejoin the cluster on start. RejoinAfterLeave bool // AdvertiseReconnectTimeout is the duration after which this node should be // assumed to not be returning and thus should be reaped within Serf. This // can only be set for Client agents AdvertiseReconnectTimeout time.Duration // Build is a string that is gossiped around, and can be used to help // operators track which versions are actively deployed Build string // ACLEnabled is used to enable ACLs ACLsEnabled bool // ACLMasterToken is used to bootstrap the ACL system. It should be specified // on the servers in the ACLDatacenter. When the leader comes online, it ensures // that the Master token is available. This provides the initial token. ACLMasterToken string // ACLDatacenter provides the authoritative datacenter for ACL // tokens. If not provided, ACL verification is disabled. ACLDatacenter string // ACLTokenTTL controls the time-to-live of cached ACL tokens. // It can be set to zero to disable caching, but this adds // a substantial cost. ACLTokenTTL time.Duration // ACLPolicyTTL controls the time-to-live of cached ACL policies. // It can be set to zero to disable caching, but this adds // a substantial cost. ACLPolicyTTL time.Duration // ACLRoleTTL controls the time-to-live of cached ACL roles. // It can be set to zero to disable caching, but this adds // a substantial cost. ACLRoleTTL time.Duration // ACLDisabledTTL is the time between checking if ACLs should be // enabled. This ACLDisabledTTL time.Duration // ACLTokenReplication is used to enabled token replication. // // By default policy-only replication is enabled. When token // replication is off and the primary datacenter is not // yet upgraded to the new ACLs no replication will be performed ACLTokenReplication bool // ACLDefaultPolicy is used to control the ACL interaction when // there is no defined policy. This can be "allow" which means // ACLs are used to deny-list, or "deny" which means ACLs are // allow-lists. ACLDefaultPolicy string // ACLDownPolicy controls the behavior of ACLs if the ACLDatacenter // cannot be contacted. It can be either "deny" to deny all requests, // "extend-cache" or "async-cache" which ignores the ACLCacheInterval and // uses cached policies. // If a policy is not in the cache, it acts like deny. // "allow" can be used to allow all requests. This is not recommended. ACLDownPolicy string // ACLReplicationRate is the max number of replication rounds that can // be run per second. Note that either 1 or 2 RPCs are used during each replication // round ACLReplicationRate int // ACLReplicationBurst is how many replication RPCs can be bursted after a // period of idleness ACLReplicationBurst int // ACLReplicationApplyLimit is the max number of replication-related // apply operations that we allow during a one second period. This is // used to limit the amount of Raft bandwidth used for replication. ACLReplicationApplyLimit int // ACLEnableKeyListPolicy is used to gate enforcement of the new "list" policy that // protects listing keys by prefix. This behavior is opt-in // by default in Consul 1.0 and later. ACLEnableKeyListPolicy bool AutoConfigEnabled bool AutoConfigIntroToken string AutoConfigIntroTokenFile string AutoConfigServerAddresses []string AutoConfigDNSSANs []string AutoConfigIPSANs []net.IP AutoConfigAuthzEnabled bool AutoConfigAuthzAuthMethod structs.ACLAuthMethod AutoConfigAuthzClaimAssertions []string AutoConfigAuthzAllowReuse bool // TombstoneTTL is used to control how long KV tombstones are retained. // This provides a window of time where the X-Consul-Index is monotonic. // Outside this window, the index may not be monotonic. This is a result // of a few trade offs: // 1) The index is defined by the data view and not globally. This is a // performance optimization that prevents any write from incrementing the // index for all data views. // 2) Tombstones are not kept indefinitely, since otherwise storage required // is also monotonic. This prevents deletes from reducing the disk space // used. // In theory, neither of these are intrinsic limitations, however for the // purposes of building a practical system, they are reasonable trade offs. // // It is also possible to set this to an incredibly long time, thereby // simulating infinite retention. This is not recommended however. // TombstoneTTL time.Duration // TombstoneTTLGranularity is used to control how granular the timers are // for the Tombstone GC. This is used to batch the GC of many keys together // to reduce overhead. It is unlikely a user would ever need to tune this. TombstoneTTLGranularity time.Duration // Minimum Session TTL SessionTTLMin time.Duration // maxTokenExpirationDuration is the maximum difference allowed between // ACLToken CreateTime and ExpirationTime values if ExpirationTime is set // on a token. ACLTokenMaxExpirationTTL time.Duration // ACLTokenMinExpirationTTL is the minimum difference allowed between // ACLToken CreateTime and ExpirationTime values if ExpirationTime is set // on a token. ACLTokenMinExpirationTTL time.Duration // ServerUp callback can be used to trigger a notification that // a Consul server is now up and known about. ServerUp func() // UserEventHandler callback can be used to handle incoming // user events. This function should not block. UserEventHandler func(serf.UserEvent) // ConfigReplicationRate is the max number of replication rounds that can // be run per second. Note that either 1 or 2 RPCs are used during each replication // round ConfigReplicationRate int // ConfigReplicationBurst is how many replication rounds can be bursted after a // period of idleness ConfigReplicationBurst int // ConfigReplicationApply limit is the max number of replication-related // apply operations that we allow during a one second period. This is // used to limit the amount of Raft bandwidth used for replication. ConfigReplicationApplyLimit int // FederationStateReplicationRate is the max number of replication rounds that can // be run per second. Note that either 1 or 2 RPCs are used during each replication // round FederationStateReplicationRate int // FederationStateReplicationBurst is how many replication rounds can be bursted after a // period of idleness FederationStateReplicationBurst int // FederationStateReplicationApply limit is the max number of replication-related // apply operations that we allow during a one second period. This is // used to limit the amount of Raft bandwidth used for replication. FederationStateReplicationApplyLimit int // CoordinateUpdatePeriod controls how long a server batches coordinate // updates before applying them in a Raft transaction. A larger period // leads to fewer Raft transactions, but also the stored coordinates // being more stale. CoordinateUpdatePeriod time.Duration // CoordinateUpdateBatchSize controls the maximum number of updates a // server batches before applying them in a Raft transaction. CoordinateUpdateBatchSize int // CoordinateUpdateMaxBatches controls the maximum number of batches we // are willing to apply in one period. After this limit we will issue a // warning and discard the remaining updates. CoordinateUpdateMaxBatches int // CheckOutputMaxSize control the max size of output of checks CheckOutputMaxSize int // RPCHandshakeTimeout limits how long we will wait for the initial magic byte // on an RPC client connection. It also governs how long we will wait for a // TLS handshake when TLS is configured however the timout applies separately // for the initial magic byte and the TLS handshake and inner magic byte. RPCHandshakeTimeout time.Duration // RPCHoldTimeout is how long an RPC can be "held" before it is errored. // This is used to paper over a loss of leadership by instead holding RPCs, // so that the caller experiences a slow response rather than an error. // This period is meant to be long enough for a leader election to take // place, and a small jitter is applied to avoid a thundering herd. RPCHoldTimeout time.Duration // RPCRateLimit and RPCMaxBurst control how frequently RPC calls are allowed // to happen. In any large enough time interval, rate limiter limits the // rate to RPCRateLimit tokens per second, with a maximum burst size of // RPCMaxBurst events. As a special case, if RPCRateLimit == Inf (the infinite // rate), RPCMaxBurst is ignored. // // See https://en.wikipedia.org/wiki/Token_bucket for more about token // buckets. RPCRateLimit rate.Limit RPCMaxBurst int // RPCMaxConnsPerClient is the limit of how many concurrent connections are // allowed from a single source IP. RPCMaxConnsPerClient int // LeaveDrainTime is used to wait after a server has left the LAN Serf // pool for RPCs to drain and new requests to be sent to other servers. LeaveDrainTime time.Duration // AutopilotConfig is used to apply the initial autopilot config when // bootstrapping. AutopilotConfig *structs.AutopilotConfig // ServerHealthInterval is the frequency with which the health of the // servers in the cluster will be updated. ServerHealthInterval time.Duration // AutopilotInterval is the frequency with which the leader will perform // autopilot tasks, such as promoting eligible non-voters and removing // dead servers. AutopilotInterval time.Duration // MetricsReportingInterval is the frequency with which the server will // report usage metrics to the configured go-metrics Sinks. MetricsReportingInterval time.Duration // ConnectEnabled is whether to enable Connect features such as the CA. ConnectEnabled bool // ConnectMeshGatewayWANFederationEnabled determines if wan federation of // datacenters should exclusively traverse mesh gateways. ConnectMeshGatewayWANFederationEnabled bool // DisableFederationStateAntiEntropy solely exists for use in unit tests to // disable a background routine. DisableFederationStateAntiEntropy bool // OverrideInitialSerfTags solely exists for use in unit tests to ensure // that a serf tag is initially set to a known value, rather than the // default to test some consul upgrade scenarios with fewer races. OverrideInitialSerfTags func(tags map[string]string) // CAConfig is used to apply the initial Connect CA configuration when // bootstrapping. CAConfig *structs.CAConfiguration // ConfigEntryBootstrap contains a list of ConfigEntries to ensure are created // If entries of the same Kind/Name exist already these will not update them. ConfigEntryBootstrap []structs.ConfigEntry // AutoEncryptAllowTLS is whether to enable the server responding to // AutoEncrypt.Sign requests. AutoEncryptAllowTLS bool RPCConfig RPCConfig // Embedded Consul Enterprise specific configuration *EnterpriseConfig } // ToTLSUtilConfig is only used by tests, usually the config is being passed // down from the agent. func (c *Config) ToTLSUtilConfig() tlsutil.Config { return tlsutil.Config{ VerifyIncoming: c.VerifyIncoming, VerifyOutgoing: c.VerifyOutgoing, VerifyServerHostname: c.VerifyServerHostname, CAFile: c.CAFile, CAPath: c.CAPath, CertFile: c.CertFile, KeyFile: c.KeyFile, NodeName: c.NodeName, Domain: c.Domain, ServerName: c.ServerName, TLSMinVersion: c.TLSMinVersion, CipherSuites: c.TLSCipherSuites, PreferServerCipherSuites: c.TLSPreferServerCipherSuites, } } // CheckProtocolVersion validates the protocol version. func (c *Config) CheckProtocolVersion() error { if c.ProtocolVersion < ProtocolVersionMin { return fmt.Errorf("Protocol version '%d' too low. Must be in range: [%d, %d]", c.ProtocolVersion, ProtocolVersionMin, ProtocolVersionMax) } if c.ProtocolVersion > ProtocolVersionMax { return fmt.Errorf("Protocol version '%d' too high. Must be in range: [%d, %d]", c.ProtocolVersion, ProtocolVersionMin, ProtocolVersionMax) } return nil } // CheckACL validates the ACL configuration. func (c *Config) CheckACL() error { switch c.ACLDefaultPolicy { case "allow": case "deny": default: return fmt.Errorf("Unsupported default ACL policy: %s", c.ACLDefaultPolicy) } switch c.ACLDownPolicy { case "allow": case "deny": case "async-cache", "extend-cache": default: return fmt.Errorf("Unsupported down ACL policy: %s", c.ACLDownPolicy) } return nil } // DefaultConfig returns a default configuration. func DefaultConfig() *Config { hostname, err := os.Hostname() if err != nil { panic(err) } conf := &Config{ Build: version.Version, Datacenter: DefaultDC, NodeName: hostname, RPCAddr: DefaultRPCAddr, RaftConfig: raft.DefaultConfig(), SerfLANConfig: libserf.DefaultConfig(), SerfWANConfig: libserf.DefaultConfig(), SerfFloodInterval: 60 * time.Second, ReconcileInterval: 60 * time.Second, ProtocolVersion: ProtocolVersion2Compatible, ACLRoleTTL: 30 * time.Second, ACLPolicyTTL: 30 * time.Second, ACLTokenTTL: 30 * time.Second, ACLDefaultPolicy: "allow", ACLDownPolicy: "extend-cache", ACLReplicationRate: 1, ACLReplicationBurst: 5, ACLReplicationApplyLimit: 100, // ops / sec ConfigReplicationRate: 1, ConfigReplicationBurst: 5, ConfigReplicationApplyLimit: 100, // ops / sec FederationStateReplicationRate: 1, FederationStateReplicationBurst: 5, FederationStateReplicationApplyLimit: 100, // ops / sec TombstoneTTL: 15 * time.Minute, TombstoneTTLGranularity: 30 * time.Second, SessionTTLMin: 10 * time.Second, ACLTokenMinExpirationTTL: 1 * time.Minute, ACLTokenMaxExpirationTTL: 24 * time.Hour, // These are tuned to provide a total throughput of 128 updates // per second. If you update these, you should update the client- // side SyncCoordinateRateTarget parameter accordingly. CoordinateUpdatePeriod: 5 * time.Second, CoordinateUpdateBatchSize: 128, CoordinateUpdateMaxBatches: 5, CheckOutputMaxSize: checks.DefaultBufSize, RPCRateLimit: rate.Inf, RPCMaxBurst: 1000, TLSMinVersion: "tls10", // TODO (slackpad) - Until #3744 is done, we need to keep these // in sync with agent/config/default.go. AutopilotConfig: &structs.AutopilotConfig{ CleanupDeadServers: true, LastContactThreshold: 200 * time.Millisecond, MaxTrailingLogs: 250, ServerStabilizationTime: 10 * time.Second, }, CAConfig: &structs.CAConfiguration{ Provider: "consul", Config: map[string]interface{}{ "LeafCertTTL": structs.DefaultLeafCertTTL, "IntermediateCertTTL": structs.DefaultIntermediateCertTTL, }, }, // Stay under the 10 second aggregation interval of // go-metrics. This ensures we always report the // usage metrics in each cycle. MetricsReportingInterval: 9 * time.Second, ServerHealthInterval: 2 * time.Second, AutopilotInterval: 10 * time.Second, DefaultQueryTime: 300 * time.Second, MaxQueryTime: 600 * time.Second, EnterpriseConfig: DefaultEnterpriseConfig(), } // Increase our reap interval to 3 days instead of 24h. conf.SerfLANConfig.ReconnectTimeout = 3 * 24 * time.Hour conf.SerfWANConfig.ReconnectTimeout = 3 * 24 * time.Hour // WAN Serf should use the WAN timing, since we are using it // to communicate between DC's conf.SerfWANConfig.MemberlistConfig = memberlist.DefaultWANConfig() // Ensure we don't have port conflicts conf.SerfLANConfig.MemberlistConfig.BindPort = DefaultLANSerfPort conf.SerfWANConfig.MemberlistConfig.BindPort = DefaultWANSerfPort // Allow dead nodes to be replaced after 30 seconds. conf.SerfLANConfig.MemberlistConfig.DeadNodeReclaimTime = 30 * time.Second conf.SerfWANConfig.MemberlistConfig.DeadNodeReclaimTime = 30 * time.Second // Raft protocol version 3 only works with other Consul servers running // 0.8.0 or later. conf.RaftConfig.ProtocolVersion = 3 // Disable shutdown on removal conf.RaftConfig.ShutdownOnRemove = false // Check every 5 seconds to see if there are enough new entries for a snapshot, can be overridden conf.RaftConfig.SnapshotInterval = 30 * time.Second // Snapshots are created every 16384 entries by default, can be overridden conf.RaftConfig.SnapshotThreshold = 16384 return conf } // RPCConfig settings for the RPC server // // TODO: move many settings to this struct. type RPCConfig struct { EnableStreaming bool } // ReloadableConfig is the configuration that is passed to ReloadConfig when // application config is reloaded. type ReloadableConfig struct { RPCRateLimit rate.Limit RPCMaxBurst int RPCMaxConnsPerClient int ConfigEntryBootstrap []structs.ConfigEntry RaftSnapshotThreshold int RaftSnapshotInterval time.Duration RaftTrailingLogs int }