####################################################### # Developer information for contributing to libcoap # ####################################################### 1. The basics ~~~~~~~~~~~~~ The libcoap project is a FOSS project that is dual licensed. The maintainer for the libcoap is Olaf Bergmann . Any contributions have to be made under the terms of the license * BSD 2-Clause (The BSD 2-Clause License) Contributions made up to 2017-06-01 have been made under the dual license model BSD 2-Clause and GPL v2+ (The GNU General Public License 2.0 or later). The used VCS for libcoap is Git, the main repository is living on GitHub. You can clone (or fork directly on GitHub) on the repository site: https://github.com/obgm/libcoap Please refer also to the libcoap website for additional information https://libcoap.net/ The build environment is grounded on the classical autotools, the GNU GCC and the LLVM C-compiler (CLang) are supported. The Windows systems are not currently supported (until someone is creating support for it). Doxygen is used for creating a HTML based online documentation of the libcoap library. 2. Communications ~~~~~~~~~~~~~~~~~ The main discussion and development platform for libcoap is the mailing list on Sourceforge. No matter if you just have a simple question, some specific problem or want to discuss some patches, please write it to the mailing list. Please avoid personal mailings to the maintainer (or some other contributor) if your questions will probably be in the interest of other users too. You can subscribe to the list here: https://lists.sourceforge.net/lists/listinfo/libcoap-developers The archive of the list can be found on: https://sourceforge.net/p/libcoap/mailman/libcoap-developers 3. Starting contributing ~~~~~~~~~~~~~~~~~~~~~~~~ As written above libcoap is maintained with the Git tools so you should be familiar with the various git commands. The libcoap project is using just two main branches, the 'main' branch is holding the point releases, all the development process is going on in the 'develop' branch. To start any contributing you first have to clone the git tree from the main repository on GitHub: git clone https://github.com/obgm/libcoap.git 4. Working on the source ~~~~~~~~~~~~~~~~~~~~~~~~ As one golden rule you should work on improvements within *your* own local development branch! To do so you have to first checkout the 'develop' branch as local branch and then start on top on this branch your own branch. So create (or better say checkout) the local 'develop' branch: cd libcoap git checkout develop origin/develop Now you can simply start your own local branch (for example 'my-develop') with the 'origin/develop' as parent so you can later create the patches against the the upstream development branch: git checkout -b my-develop At this point you can now work as known with git, modify the source, commit the changes, amend if needed and test your work. At some point you will have to generate patches to post them on the mailing list (and/or push your changes into your public Git tree). It's a good idea to post your patch series on the mailing list so other contributors will see your work and give further suggestions or discuss your work. To be able to send a patch series you will now create the series itself as single patches, this will be going easy with the 'git format-patch' command against the 'develop' branch, remind this is the upstream main development branch. To not mix up your series with probably unrelated patches let git place the patches within a defined directory. Also, while create the patches, tell git to create a cover letter patch so you can append some introducing words that will hold probably explanations why you create the patches in the way you have done. git format-patch --cover-letter -o ../patches4libcoap This command will create a patch series in ../patches4libcoap where you find a patch named '0000-cover-letter.patch'. Please modify this patch with some useful information's for the mailing list. After finish this you now can send your patches to libcoap-developers@lists.sourceforge.net git send-email ../patches4libcoap/* --to=libcoap-developers@lists.sourceforge.net 5. Coding rules ~~~~~~~~~~~~~~~ As every FOSS project the libcoap project needs also some rules for coding. There are loss but the main of them are important! 5.1 License and Copyright ------------------------- Every new file must contain a license and the copyright holder(s). Please take a look into existing files and adopt the needed changes to your new file(s). 5.2 Source Code Indentation --------------------------- * For better reading the indentation is set to 2 characters as spaces, this is depended on the often used nested functions like 'if-else'. Don't use TABs any there! Avoid trailing white spaces at the end of a line. It's appropriate to set up a modline like this one at first line within the source file: --8<---- /* -*- Mode: C; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ --->8-- * Single lines within the source code should not be longer then 78 characters. * If there a functions with a lot of parameters that do not fit into the above rule split the declaration (in the *.h) and the implementation (in the *.c) into single lines per parameter. For example like this (from src/block.c): --8<---- int coap_add_block(coap_pdu_t *pdu, unsigned int len, const unsigned char *data, unsigned int block_num, unsigned char block_szx); --->8-- 5.3 Source Code Documentation ----------------------------- * A useful source code documentation is mandatory. Mostly to be done within the source code files, but more complex description should be done in extra README files. * Please set up/adjust the doxygen documentation if you create new functions or change existing functions. The doxygen documentation has to be done in the header files as they are the public part of the libcoap and only use the @-syntax for doxygen commands (akin to javadoc). 5.4 API Changes --------------- * Never break the API! Don't remove old functions and if there some changes are needed in some kind always provide a wrapper for the old call to let the library be backward compatible and mark the old function as @deprecated in the doxygen comment. Please discuss needed changes on the mailing list. 5.5 Patches and Commits ----------------------- * Git commits must be atomic and contain a declarative subject line (max 50 characters if possible) and a body for a statement if needed. Use the possibility to write a good explanation why your patch/commit is handle the changes in the way you have done. Remind that other user can read your code but not necessary understand why the code is written this way. Don't use something to generic like "bugfix commit". * A patch/commit or a series of patches/commits have to ensure that the whole project is able to build up every thing, in short: Do not break any make target and test your work. * Every patch/commit should handle one single logical change. If more than one patch/commit is needed for a change explain it, respect the point above. If your subject line become much larger than 50 characters then typically your patch is to big for one single commit. * Commit message should begin with a submodule or unit the commit is for. By this your commit message helps to find thematic other changes. If you have to search and find something with 'git log | grep [foo]' you will see why this is useful. Examples: rd.c: Fixed type-specifier warning Makefile.am: Added missing src/address.c address.[hc]: make coap_address_equals() not inline on POSIX 6. Where to start contributing? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ There are various things you could starting on to contribute, the best is you simply pick up an issue you blindly see and just improve the situation. Please take also a look into the file TODO and choose a point from there or point the maintainer to add other things here too. * Documentation We are always lacking on a better documentation on the source code, so maybe you can improve the doxygen documentation. Also a good documentation on the usage of the libcoap and the example binaries is always improvable. So we appreciate any help on this. * Manual Pages The source is providing some example binaries which originally just should show how the libcoap can be used. Right now these binaries are fully usable and quite more than simple examples on a system. There are man pages for these binaries available, if you found there is a improvement needed please do so and write to the mailing list explained in section 2. Maybe you can write up some good HowTo's on the usage for these binaries. * HowTo's The libcoap library has now a lot of functions you can use. Unfortunately there is no good user guide on how to use the libcoap in any external project. This means there is no HowTo or CheatSheet for a programming person available. You want to write up something? * Missing functionality There are some features that are still missing inside the libcoap. For example some DTLS implementations and proxy functionality.