/** @file Common Library for PEI USB. Copyright (c) 1999 - 2018, Intel Corporation. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent **/ #ifndef _PEI_USB_LIB_H_ #define _PEI_USB_LIB_H_ // // Standard device request and request type // By [Spec-USB20/Chapter-9.4] // #define USB_DEV_GET_STATUS 0x00 #define USB_DEV_GET_STATUS_REQ_TYPE_D 0x80 // Receiver : Device #define USB_DEV_GET_STATUS_REQ_TYPE_I 0x81 // Receiver : Interface #define USB_DEV_GET_STATUS_REQ_TYPE_E 0x82 // Receiver : Endpoint #define USB_DEV_CLEAR_FEATURE 0x01 #define USB_DEV_CLEAR_FEATURE_REQ_TYPE_D 0x00 // Receiver : Device #define USB_DEV_CLEAR_FEATURE_REQ_TYPE_I 0x01 // Receiver : Interface #define USB_DEV_CLEAR_FEATURE_REQ_TYPE_E 0x02 // Receiver : Endpoint #define USB_DEV_SET_FEATURE 0x03 #define USB_DEV_SET_FEATURE_REQ_TYPE_D 0x00 // Receiver : Device #define USB_DEV_SET_FEATURE_REQ_TYPE_I 0x01 // Receiver : Interface #define USB_DEV_SET_FEATURE_REQ_TYPE_E 0x02 // Receiver : Endpoint #define USB_DEV_SET_ADDRESS 0x05 #define USB_DEV_SET_ADDRESS_REQ_TYPE 0x00 #define USB_DEV_GET_DESCRIPTOR 0x06 #define USB_DEV_GET_DESCRIPTOR_REQ_TYPE 0x80 #define USB_DEV_SET_DESCRIPTOR 0x07 #define USB_DEV_SET_DESCRIPTOR_REQ_TYPE 0x00 #define USB_DEV_GET_CONFIGURATION 0x08 #define USB_DEV_GET_CONFIGURATION_REQ_TYPE 0x80 #define USB_DEV_SET_CONFIGURATION 0x09 #define USB_DEV_SET_CONFIGURATION_REQ_TYPE 0x00 #define USB_DEV_GET_INTERFACE 0x0A #define USB_DEV_GET_INTERFACE_REQ_TYPE 0x81 #define USB_DEV_SET_INTERFACE 0x0B #define USB_DEV_SET_INTERFACE_REQ_TYPE 0x01 #define USB_DEV_SYNCH_FRAME 0x0C #define USB_DEV_SYNCH_FRAME_REQ_TYPE 0x82 // // USB Descriptor types // #define USB_DT_DEVICE 0x01 #define USB_DT_CONFIG 0x02 #define USB_DT_STRING 0x03 #define USB_DT_INTERFACE 0x04 #define USB_DT_ENDPOINT 0x05 #define USB_DT_HUB 0x29 #define USB_DT_HID 0x21 // // USB request type // #define USB_TYPE_STANDARD (0x00 << 5) #define USB_TYPE_CLASS (0x01 << 5) #define USB_TYPE_VENDOR (0x02 << 5) #define USB_TYPE_RESERVED (0x03 << 5) // // USB request targer device // #define USB_RECIP_DEVICE 0x00 #define USB_RECIP_INTERFACE 0x01 #define USB_RECIP_ENDPOINT 0x02 #define USB_RECIP_OTHER 0x03 typedef enum { EfiUsbEndpointHalt, EfiUsbDeviceRemoteWakeup } EFI_USB_STANDARD_FEATURE_SELECTOR; // // Usb Data recipient type // typedef enum { EfiUsbDevice, EfiUsbInterface, EfiUsbEndpoint } EFI_USB_RECIPIENT; /** Clear a given usb feature. @param PeiServices General-purpose services that are available to every PEIM. @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance. @param Recipient The recipient of ClearFeature Request, should be one of Device/Interface/Endpoint. @param Value Request Value. @param Target Request Index. @retval EFI_SUCCESS Usb feature is cleared successfully. @retval EFI_DEVICE_ERROR Cannot clear the usb feature due to a hardware error. @retval Others Other failure occurs. **/ EFI_STATUS PeiUsbClearDeviceFeature ( IN EFI_PEI_SERVICES **PeiServices, IN PEI_USB_IO_PPI *UsbIoPpi, IN EFI_USB_RECIPIENT Recipient, IN UINT16 Value, IN UINT16 Target ); /** Clear Endpoint Halt. @param PeiServices General-purpose services that are available to every PEIM. @param UsbIoPpi Indicates the PEI_USB_IO_PPI instance. @param EndpointAddress The endpoint address. @retval EFI_SUCCESS Endpoint halt is cleared successfully. @retval EFI_DEVICE_ERROR Cannot clear the endpoint halt status due to a hardware error. @retval Others Other failure occurs. **/ EFI_STATUS PeiUsbClearEndpointHalt ( IN EFI_PEI_SERVICES **PeiServices, IN PEI_USB_IO_PPI *UsbIoPpi, IN UINT8 EndpointAddress ); #endif