/****************************************************************************** * * Module Name: aeregion - Operation region support for acpiexec * *****************************************************************************/ /****************************************************************************** * * 1. Copyright Notice * * Some or all of this work - Copyright (c) 1999 - 2017, Intel Corp. * All rights reserved. * * 2. License * * 2.1. This is your license from Intel Corp. under its intellectual property * rights. You may have additional license terms from the party that provided * you this software, covering your right to use that party's intellectual * property rights. * * 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a * copy of the source code appearing in this file ("Covered Code") an * irrevocable, perpetual, worldwide license under Intel's copyrights in the * base code distributed originally by Intel ("Original Intel Code") to copy, * make derivatives, distribute, use and display any portion of the Covered * Code in any form, with the right to sublicense such rights; and * * 2.3. Intel grants Licensee a non-exclusive and non-transferable patent * license (with the right to sublicense), under only those claims of Intel * patents that are infringed by the Original Intel Code, to make, use, sell, * offer to sell, and import the Covered Code and derivative works thereof * solely to the minimum extent necessary to exercise the above copyright * license, and in no event shall the patent license extend to any additions * to or modifications of the Original Intel Code. No other license or right * is granted directly or by implication, estoppel or otherwise; * * The above copyright and patent license is granted only if the following * conditions are met: * * 3. Conditions * * 3.1. Redistribution of Source with Rights to Further Distribute Source. * Redistribution of source code of any substantial portion of the Covered * Code or modification with rights to further distribute source must include * the above Copyright Notice, the above License, this list of Conditions, * and the following Disclaimer and Export Compliance provision. In addition, * Licensee must cause all Covered Code to which Licensee contributes to * contain a file documenting the changes Licensee made to create that Covered * Code and the date of any change. Licensee must include in that file the * documentation of any changes made by any predecessor Licensee. Licensee * must include a prominent statement that the modification is derived, * directly or indirectly, from Original Intel Code. * * 3.2. Redistribution of Source with no Rights to Further Distribute Source. * Redistribution of source code of any substantial portion of the Covered * Code or modification without rights to further distribute source must * include the following Disclaimer and Export Compliance provision in the * documentation and/or other materials provided with distribution. In * addition, Licensee may not authorize further sublicense of source of any * portion of the Covered Code, and must include terms to the effect that the * license from Licensee to its licensee is limited to the intellectual * property embodied in the software Licensee provides to its licensee, and * not to intellectual property embodied in modifications its licensee may * make. * * 3.3. Redistribution of Executable. Redistribution in executable form of any * substantial portion of the Covered Code or modification must reproduce the * above Copyright Notice, and the following Disclaimer and Export Compliance * provision in the documentation and/or other materials provided with the * distribution. * * 3.4. Intel retains all right, title, and interest in and to the Original * Intel Code. * * 3.5. Neither the name Intel nor any other trademark owned or controlled by * Intel shall be used in advertising or otherwise to promote the sale, use or * other dealings in products derived from or relating to the Covered Code * without prior written authorization from Intel. * * 4. Disclaimer and Export Compliance * * 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED * HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE * IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE, * INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY * UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY * IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A * PARTICULAR PURPOSE. * * 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES * OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR * COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT, * SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY * CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL * HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS * SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY * LIMITED REMEDY. * * 4.3. Licensee shall not export, either directly or indirectly, any of this * software or system incorporating such software without first obtaining any * required license or other approval from the U. S. Department of Commerce or * any other agency or department of the United States Government. In the * event Licensee exports any such software from the United States or * re-exports any such software from a foreign destination, Licensee shall * ensure that the distribution and export/re-export of the software is in * compliance with all laws, regulations, orders, or other restrictions of the * U.S. Export Administration Regulations. Licensee agrees that neither it nor * any of its subsidiaries will export/re-export any technical data, process, * software, or service, directly or indirectly, to any country for which the * United States government or any agency thereof requires an export license, * other governmental approval, or letter of assurance, without first obtaining * such license, approval or letter. * ***************************************************************************** * * Alternatively, you may choose to be licensed under the terms of the * following license: * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * Alternatively, you may choose to be licensed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * *****************************************************************************/ #include "aecommon.h" #define _COMPONENT ACPI_TOOLS ACPI_MODULE_NAME ("aeregion") /* Local prototypes */ static ACPI_STATUS AeRegionInit ( ACPI_HANDLE RegionHandle, UINT32 Function, void *HandlerContext, void **RegionContext); static ACPI_STATUS AeInstallEcHandler ( ACPI_HANDLE ObjHandle, UINT32 Level, void *Context, void **ReturnValue); static ACPI_STATUS AeInstallPciHandler ( ACPI_HANDLE ObjHandle, UINT32 Level, void *Context, void **ReturnValue); static AE_DEBUG_REGIONS AeRegions; BOOLEAN AcpiGbl_DisplayRegionAccess = FALSE; ACPI_CONNECTION_INFO AeMyContext; /* * We will override some of the default region handlers, especially * the SystemMemory handler, which must be implemented locally. * These handlers are installed "early" - before any _REG methods * are executed - since they are special in the sense that the ACPI spec * declares that they must "always be available". Cannot override the * DataTable region handler either -- needed for test execution. * * NOTE: The local region handler will simulate access to these address * spaces by creating a memory buffer behind each operation region. */ static ACPI_ADR_SPACE_TYPE DefaultSpaceIdList[] = { ACPI_ADR_SPACE_SYSTEM_MEMORY, ACPI_ADR_SPACE_SYSTEM_IO, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_ADR_SPACE_EC }; /* * We will install handlers for some of the various address space IDs. * Test one user-defined address space (used by aslts). */ #define ACPI_ADR_SPACE_USER_DEFINED1 0x80 #define ACPI_ADR_SPACE_USER_DEFINED2 0xE4 static ACPI_ADR_SPACE_TYPE SpaceIdList[] = { ACPI_ADR_SPACE_SMBUS, ACPI_ADR_SPACE_CMOS, ACPI_ADR_SPACE_PCI_BAR_TARGET, ACPI_ADR_SPACE_IPMI, ACPI_ADR_SPACE_GPIO, ACPI_ADR_SPACE_GSBUS, ACPI_ADR_SPACE_FIXED_HARDWARE, ACPI_ADR_SPACE_USER_DEFINED1, ACPI_ADR_SPACE_USER_DEFINED2 }; /****************************************************************************** * * FUNCTION: AeRegionInit * * PARAMETERS: Region init handler * * RETURN: Status * * DESCRIPTION: Opregion init function. * *****************************************************************************/ static ACPI_STATUS AeRegionInit ( ACPI_HANDLE RegionHandle, UINT32 Function, void *HandlerContext, void **RegionContext) { if (Function == ACPI_REGION_DEACTIVATE) { *RegionContext = NULL; } else { *RegionContext = RegionHandle; } return (AE_OK); } /****************************************************************************** * * FUNCTION: AeOverrideRegionHandlers * * PARAMETERS: None * * RETURN: None * * DESCRIPTION: Override the default region handlers for memory, i/o, and * pci_config. Also install a handler for EC. This is part of * the "install early handlers" functionality. * *****************************************************************************/ void AeOverrideRegionHandlers ( void) { UINT32 i; ACPI_STATUS Status; /* * Install handlers that will override the default handlers for some of * the space IDs. */ for (i = 0; i < ACPI_ARRAY_LENGTH (DefaultSpaceIdList); i++) { /* Install handler at the root object */ Status = AcpiInstallAddressSpaceHandler (ACPI_ROOT_OBJECT, DefaultSpaceIdList[i], AeRegionHandler, AeRegionInit, &AeMyContext); if (ACPI_FAILURE (Status)) { ACPI_EXCEPTION ((AE_INFO, Status, "Could not install an OpRegion handler for %s space(%u)", AcpiUtGetRegionName ((UINT8) DefaultSpaceIdList[i]), DefaultSpaceIdList[i])); } } } /****************************************************************************** * * FUNCTION: AeInstallRegionHandlers * * PARAMETERS: None * * RETURN: None * * DESCRIPTION: Install handlers for the address spaces other than memory, * i/o, and pci_config. * *****************************************************************************/ void AeInstallRegionHandlers ( void) { UINT32 i; ACPI_STATUS Status; /* * Install handlers for some of the "device driver" address spaces * such as SMBus, etc. */ for (i = 0; i < ACPI_ARRAY_LENGTH (SpaceIdList); i++) { /* Install handler at the root object */ Status = AcpiInstallAddressSpaceHandler (ACPI_ROOT_OBJECT, SpaceIdList[i], AeRegionHandler, AeRegionInit, &AeMyContext); if (ACPI_FAILURE (Status)) { ACPI_EXCEPTION ((AE_INFO, Status, "Could not install an OpRegion handler for %s space(%u)", AcpiUtGetRegionName((UINT8) SpaceIdList[i]), SpaceIdList[i])); return; } } } /******************************************************************************* * * FUNCTION: AeInstallDeviceHandlers, * AeInstallEcHandler, * AeInstallPciHandler * * PARAMETERS: ACPI_WALK_NAMESPACE callback * * RETURN: Status * * DESCRIPTION: Walk entire namespace, install a handler for every EC * and PCI device found. * ******************************************************************************/ static ACPI_STATUS AeInstallEcHandler ( ACPI_HANDLE ObjHandle, UINT32 Level, void *Context, void **ReturnValue) { ACPI_STATUS Status; /* Install the handler for this EC device */ Status = AcpiInstallAddressSpaceHandler (ObjHandle, ACPI_ADR_SPACE_EC, AeRegionHandler, AeRegionInit, &AeMyContext); if (ACPI_FAILURE (Status)) { ACPI_EXCEPTION ((AE_INFO, Status, "Could not install an OpRegion handler for EC device (%p)", ObjHandle)); } return (Status); } static ACPI_STATUS AeInstallPciHandler ( ACPI_HANDLE ObjHandle, UINT32 Level, void *Context, void **ReturnValue) { ACPI_STATUS Status; /* Install memory and I/O handlers for the PCI device */ Status = AcpiInstallAddressSpaceHandler (ObjHandle, ACPI_ADR_SPACE_SYSTEM_IO, AeRegionHandler, AeRegionInit, &AeMyContext); if (ACPI_FAILURE (Status)) { ACPI_EXCEPTION ((AE_INFO, Status, "Could not install an OpRegion handler for PCI device (%p)", ObjHandle)); } Status = AcpiInstallAddressSpaceHandler (ObjHandle, ACPI_ADR_SPACE_SYSTEM_MEMORY, AeRegionHandler, AeRegionInit, &AeMyContext); if (ACPI_FAILURE (Status)) { ACPI_EXCEPTION ((AE_INFO, Status, "Could not install an OpRegion handler for PCI device (%p)", ObjHandle)); } return (AE_CTRL_TERMINATE); } ACPI_STATUS AeInstallDeviceHandlers ( void) { /* Find all Embedded Controller devices */ AcpiGetDevices ("PNP0C09", AeInstallEcHandler, NULL, NULL); /* Install a PCI handler */ AcpiGetDevices ("PNP0A08", AeInstallPciHandler, NULL, NULL); return (AE_OK); } /****************************************************************************** * * FUNCTION: AeRegionHandler * * PARAMETERS: Standard region handler parameters * * RETURN: Status * * DESCRIPTION: Test handler - Handles some dummy regions via memory that can * be manipulated in Ring 3. Simulates actual reads and writes. * *****************************************************************************/ ACPI_STATUS AeRegionHandler ( UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 BitWidth, UINT64 *Value, void *HandlerContext, void *RegionContext) { ACPI_OPERAND_OBJECT *RegionObject = ACPI_CAST_PTR (ACPI_OPERAND_OBJECT, RegionContext); UINT8 *Buffer = ACPI_CAST_PTR (UINT8, Value); UINT8 *OldBuffer; UINT8 *NewBuffer; ACPI_PHYSICAL_ADDRESS BaseAddress; ACPI_PHYSICAL_ADDRESS BaseAddressEnd; ACPI_PHYSICAL_ADDRESS RegionAddress; ACPI_PHYSICAL_ADDRESS RegionAddressEnd; ACPI_SIZE Length; BOOLEAN BufferExists; BOOLEAN BufferResize; AE_REGION *RegionElement; void *BufferValue; ACPI_STATUS Status; UINT32 ByteWidth; UINT32 RegionLength; UINT32 i; UINT8 SpaceId; ACPI_CONNECTION_INFO *MyContext; UINT32 Value1; UINT32 Value2; ACPI_RESOURCE *Resource; ACPI_FUNCTION_NAME (AeRegionHandler); /* * If the object is not a region, simply return */ if (RegionObject->Region.Type != ACPI_TYPE_REGION) { return (AE_OK); } /* Check that we actually got back our context parameter */ if (HandlerContext != &AeMyContext) { printf ("Region handler received incorrect context %p, should be %p\n", HandlerContext, &AeMyContext); } MyContext = ACPI_CAST_PTR (ACPI_CONNECTION_INFO, HandlerContext); /* * Find the region's address space and length before searching * the linked list. */ BaseAddress = RegionObject->Region.Address; Length = (ACPI_SIZE) RegionObject->Region.Length; SpaceId = RegionObject->Region.SpaceId; ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION, "Operation Region request on %s at 0x%X\n", AcpiUtGetRegionName (RegionObject->Region.SpaceId), (UINT32) Address)); /* * Region support can be disabled with the -do option. * We use this to support dynamically loaded tables where we pass a valid * address to the AML. */ if (AcpiGbl_DbOpt_NoRegionSupport) { BufferValue = ACPI_TO_POINTER (Address); ByteWidth = (BitWidth / 8); if (BitWidth % 8) { ByteWidth += 1; } goto DoFunction; } switch (SpaceId) { case ACPI_ADR_SPACE_SYSTEM_IO: /* * For I/O space, exercise the port validation * Note: ReadPort currently always returns all ones, length=BitLength */ switch (Function & ACPI_IO_MASK) { case ACPI_READ: if (BitWidth == 64) { /* Split the 64-bit request into two 32-bit requests */ Status = AcpiHwReadPort (Address, &Value1, 32); ACPI_CHECK_OK (AcpiHwReadPort, Status); Status = AcpiHwReadPort (Address+4, &Value2, 32); ACPI_CHECK_OK (AcpiHwReadPort, Status); *Value = Value1 | ((UINT64) Value2 << 32); } else { Status = AcpiHwReadPort (Address, &Value1, BitWidth); ACPI_CHECK_OK (AcpiHwReadPort, Status); *Value = (UINT64) Value1; } break; case ACPI_WRITE: if (BitWidth == 64) { /* Split the 64-bit request into two 32-bit requests */ Status = AcpiHwWritePort (Address, ACPI_LODWORD (*Value), 32); ACPI_CHECK_OK (AcpiHwWritePort, Status); Status = AcpiHwWritePort (Address+4, ACPI_HIDWORD (*Value), 32); ACPI_CHECK_OK (AcpiHwWritePort, Status); } else { Status = AcpiHwWritePort (Address, (UINT32) *Value, BitWidth); ACPI_CHECK_OK (AcpiHwWritePort, Status); } break; default: Status = AE_BAD_PARAMETER; break; } if (ACPI_FAILURE (Status)) { return (Status); } /* Now go ahead and simulate the hardware */ break; /* * SMBus and GenericSerialBus support the various bidirectional * protocols. */ case ACPI_ADR_SPACE_SMBUS: case ACPI_ADR_SPACE_GSBUS: /* ACPI 5.0 */ Length = 0; switch (Function & ACPI_IO_MASK) { case ACPI_READ: switch (Function >> 16) { case AML_FIELD_ATTRIB_QUICK: Length = 0; break; case AML_FIELD_ATTRIB_SEND_RCV: case AML_FIELD_ATTRIB_BYTE: Length = 1; break; case AML_FIELD_ATTRIB_WORD: case AML_FIELD_ATTRIB_WORD_CALL: Length = 2; break; case AML_FIELD_ATTRIB_BLOCK: case AML_FIELD_ATTRIB_BLOCK_CALL: Length = 32; break; case AML_FIELD_ATTRIB_MULTIBYTE: case AML_FIELD_ATTRIB_RAW_BYTES: case AML_FIELD_ATTRIB_RAW_PROCESS: Length = MyContext->AccessLength; break; default: break; } break; case ACPI_WRITE: switch (Function >> 16) { case AML_FIELD_ATTRIB_QUICK: case AML_FIELD_ATTRIB_SEND_RCV: case AML_FIELD_ATTRIB_BYTE: case AML_FIELD_ATTRIB_WORD: case AML_FIELD_ATTRIB_BLOCK: Length = 0; break; case AML_FIELD_ATTRIB_WORD_CALL: Length = 2; break; case AML_FIELD_ATTRIB_BLOCK_CALL: Length = 32; break; case AML_FIELD_ATTRIB_MULTIBYTE: case AML_FIELD_ATTRIB_RAW_BYTES: case AML_FIELD_ATTRIB_RAW_PROCESS: Length = MyContext->AccessLength; break; default: break; } break; default: break; } if (AcpiGbl_DisplayRegionAccess) { AcpiOsPrintf ("AcpiExec: %s " "%s: Attr %X Addr %.4X BaseAddr %.4X Len %.2X Width %X BufLen %X", AcpiUtGetRegionName (SpaceId), (Function & ACPI_IO_MASK) ? "Write" : "Read ", (UINT32) (Function >> 16), (UINT32) Address, (UINT32) BaseAddress, Length, BitWidth, Buffer[1]); /* GenericSerialBus has a Connection() parameter */ if (SpaceId == ACPI_ADR_SPACE_GSBUS) { Status = AcpiBufferToResource (MyContext->Connection, MyContext->Length, &Resource); AcpiOsPrintf (" [AccLen %.2X Conn %p]", MyContext->AccessLength, MyContext->Connection); } AcpiOsPrintf ("\n"); } /* Setup the return buffer. Note: ASLTS depends on these fill values */ for (i = 0; i < Length; i++) { Buffer[i+2] = (UINT8) (0xA0 + i); } Buffer[0] = 0x7A; Buffer[1] = (UINT8) Length; return (AE_OK); case ACPI_ADR_SPACE_IPMI: /* ACPI 4.0 */ if (AcpiGbl_DisplayRegionAccess) { AcpiOsPrintf ("AcpiExec: IPMI " "%s: Attr %X Addr %.4X BaseAddr %.4X Len %.2X Width %X BufLen %X\n", (Function & ACPI_IO_MASK) ? "Write" : "Read ", (UINT32) (Function >> 16), (UINT32) Address, (UINT32) BaseAddress, Length, BitWidth, Buffer[1]); } /* * Regardless of a READ or WRITE, this handler is passed a 66-byte * buffer in which to return the IPMI status/length/data. * * Return some example data to show use of the bidirectional buffer */ Buffer[0] = 0; /* Status byte */ Buffer[1] = 64; /* Return buffer data length */ Buffer[2] = 0; /* Completion code */ Buffer[3] = 0; /* Reserved */ /* * Fill the 66-byte buffer with the return data. * Note: ASLTS depends on these fill values. */ for (i = 4; i < 66; i++) { Buffer[i] = (UINT8) (i); } return (AE_OK); /* * GPIO has some special semantics: * 1) Address is the pin number index into the Connection() pin list * 2) BitWidth is the actual number of bits (pins) defined by the field */ case ACPI_ADR_SPACE_GPIO: /* ACPI 5.0 */ if (AcpiGbl_DisplayRegionAccess) { AcpiOsPrintf ("AcpiExec: GPIO " "%s: Addr %.4X Width %X Conn %p\n", (Function & ACPI_IO_MASK) ? "Write" : "Read ", (UINT32) Address, BitWidth, MyContext->Connection); } return (AE_OK); default: break; } /* * Search through the linked list for this region's buffer */ BufferExists = FALSE; BufferResize = FALSE; RegionElement = AeRegions.RegionList; if (AeRegions.NumberOfRegions) { BaseAddressEnd = BaseAddress + Length - 1; while (!BufferExists && RegionElement) { RegionAddress = RegionElement->Address; RegionAddressEnd = RegionElement->Address + RegionElement->Length - 1; RegionLength = RegionElement->Length; /* * Overlapping Region Support * * While searching through the region buffer list, determine if an * overlap exists between the requested buffer space and the current * RegionElement space. If there is an overlap then replace the old * buffer with a new buffer of increased size before continuing to * do the read or write */ if (RegionElement->SpaceId != SpaceId || BaseAddressEnd < RegionAddress || BaseAddress > RegionAddressEnd) { /* * Requested buffer is outside of the current RegionElement * bounds */ RegionElement = RegionElement->NextRegion; } else { /* * Some amount of buffer space sharing exists. There are 4 cases * to consider: * * 1. Right overlap * 2. Left overlap * 3. Left and right overlap * 4. Fully contained - no resizing required */ BufferExists = TRUE; if ((BaseAddress >= RegionAddress) && (BaseAddress <= RegionAddressEnd) && (BaseAddressEnd > RegionAddressEnd)) { /* Right overlap */ RegionElement->Length = (UINT32) (BaseAddress - RegionAddress + Length); BufferResize = TRUE; } else if ((BaseAddressEnd >= RegionAddress) && (BaseAddressEnd <= RegionAddressEnd) && (BaseAddress < RegionAddress)) { /* Left overlap */ RegionElement->Address = BaseAddress; RegionElement->Length = (UINT32) (RegionAddress - BaseAddress + RegionElement->Length); BufferResize = TRUE; } else if ((BaseAddress < RegionAddress) && (BaseAddressEnd > RegionAddressEnd)) { /* Left and right overlap */ RegionElement->Address = BaseAddress; RegionElement->Length = Length; BufferResize = TRUE; } /* * only remaining case is fully contained for which we don't * need to do anything */ if (BufferResize) { NewBuffer = AcpiOsAllocate (RegionElement->Length); if (!NewBuffer) { return (AE_NO_MEMORY); } OldBuffer = RegionElement->Buffer; RegionElement->Buffer = NewBuffer; NewBuffer = NULL; /* Initialize the region with the default fill value */ memset (RegionElement->Buffer, AcpiGbl_RegionFillValue, RegionElement->Length); /* * Get BufferValue to point (within the new buffer) to the * base address of the old buffer */ BufferValue = (UINT8 *) RegionElement->Buffer + (UINT64) RegionAddress - (UINT64) RegionElement->Address; /* * Copy the old buffer to its same location within the new * buffer */ memcpy (BufferValue, OldBuffer, RegionLength); AcpiOsFree (OldBuffer); } } } } /* * If the Region buffer does not exist, create it now */ if (!BufferExists) { /* Do the memory allocations first */ RegionElement = AcpiOsAllocate (sizeof (AE_REGION)); if (!RegionElement) { return (AE_NO_MEMORY); } RegionElement->Buffer = AcpiOsAllocate (Length); if (!RegionElement->Buffer) { AcpiOsFree (RegionElement); return (AE_NO_MEMORY); } /* Initialize the region with the default fill value */ memset (RegionElement->Buffer, AcpiGbl_RegionFillValue, Length); RegionElement->Address = BaseAddress; RegionElement->Length = Length; RegionElement->SpaceId = SpaceId; RegionElement->NextRegion = NULL; /* * Increment the number of regions and put this one * at the head of the list as it will probably get accessed * more often anyway. */ AeRegions.NumberOfRegions += 1; if (AeRegions.RegionList) { RegionElement->NextRegion = AeRegions.RegionList; } AeRegions.RegionList = RegionElement; } /* Calculate the size of the memory copy */ ByteWidth = (BitWidth / 8); if (BitWidth % 8) { ByteWidth += 1; } /* * The buffer exists and is pointed to by RegionElement. * We now need to verify the request is valid and perform the operation. * * NOTE: RegionElement->Length is in bytes, therefore it we compare against * ByteWidth (see above) */ if ((RegionObject->Region.SpaceId != ACPI_ADR_SPACE_GPIO) && ((UINT64) Address + ByteWidth) > ((UINT64)(RegionElement->Address) + RegionElement->Length)) { ACPI_WARNING ((AE_INFO, "Request on [%4.4s] is beyond region limit " "Req-0x%X+0x%X, Base=0x%X, Len-0x%X", (RegionObject->Region.Node)->Name.Ascii, (UINT32) Address, ByteWidth, (UINT32)(RegionElement->Address), RegionElement->Length)); return (AE_AML_REGION_LIMIT); } /* * Get BufferValue to point to the "address" in the buffer */ BufferValue = ((UINT8 *) RegionElement->Buffer + ((UINT64) Address - (UINT64) RegionElement->Address)); DoFunction: /* * Perform a read or write to the buffer space */ switch (Function) { case ACPI_READ: /* * Set the pointer Value to whatever is in the buffer */ memcpy (Value, BufferValue, ByteWidth); break; case ACPI_WRITE: /* * Write the contents of Value to the buffer */ memcpy (BufferValue, Value, ByteWidth); break; default: return (AE_BAD_PARAMETER); } if (AcpiGbl_DisplayRegionAccess) { switch (SpaceId) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: AcpiOsPrintf ("AcpiExec: SystemMemory " "%s: Val %.8X Addr %.4X Width %X [REGION: BaseAddr %.4X Len %.2X]\n", (Function & ACPI_IO_MASK) ? "Write" : "Read ", (UINT32) *Value, (UINT32) Address, BitWidth, (UINT32) BaseAddress, Length); break; case ACPI_ADR_SPACE_GPIO: /* ACPI 5.0 */ /* This space is required to always be ByteAcc */ Status = AcpiBufferToResource (MyContext->Connection, MyContext->Length, &Resource); AcpiOsPrintf ("AcpiExec: GeneralPurposeIo " "%s: Val %.8X Addr %.4X BaseAddr %.4X Len %.2X Width %X AccLen %.2X Conn %p\n", (Function & ACPI_IO_MASK) ? "Write" : "Read ", (UINT32) *Value, (UINT32) Address, (UINT32) BaseAddress, Length, BitWidth, MyContext->AccessLength, MyContext->Connection); break; default: break; } } return (AE_OK); }