/*- * Copyright (c) 2017 Ian Lepore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * Driver for imx Enhanced Programmable Interval Timer, a simple free-running * counter device that can be used as the system timecounter. On imx5 a second * instance of the device is used as the system eventtimer. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define EPIT_CR 0x00 /* Control register */ #define EPIT_CR_CLKSRC_SHIFT 24 #define EPIT_CR_CLKSRC_OFF 0 #define EPIT_CR_CLKSRC_IPG 1 #define EPIT_CR_CLKSRC_HFCLK 2 #define EPIT_CR_CLKSRC_LFCLK 3 #define EPIT_CR_STOPEN (1u << 21) #define EPIT_CR_WAITEN (1u << 19) #define EPIT_CR_DBGEN (1u << 18) #define EPIT_CR_IOVW (1u << 17) #define EPIT_CR_SWR (1u << 16) #define EPIT_CR_RLD (1u << 3) #define EPIT_CR_OCIEN (1u << 2) #define EPIT_CR_ENMOD (1u << 1) #define EPIT_CR_EN (1u << 0) #define EPIT_SR 0x04 /* Status register */ #define EPIT_SR_OCIF (1u << 0) #define EPIT_LR 0x08 /* Load register */ #define EPIT_CMPR 0x0c /* Compare register */ #define EPIT_CNR 0x10 /* Counter register */ /* * Define event timer limits. * * In theory our minimum period is 1 tick, because to setup a oneshot we don't * need a read-modify-write sequence to calculate and set a compare register * value while the counter is running. In practice the waveform diagrams in the * manual make it appear that a setting of 1 might cause it to miss the event, * so I'm setting the lower limit to 2 ticks. */ #define ET_MIN_TICKS 2 #define ET_MAX_TICKS 0xfffffffe static u_int epit_tc_get_timecount(struct timecounter *tc); struct epit_softc { device_t dev; struct resource * memres; struct resource * intres; void * inthandle; uint32_t clkfreq; uint32_t ctlreg; uint32_t period; struct timecounter tc; struct eventtimer et; bool oneshot; }; /* * Probe data. For some reason, the standard linux dts files don't have * compatible properties on the epit devices (other properties are missing too, * like clocks, but we don't care as much about that). So our probe routine * uses the name of the node (must contain "epit") and the address of the * registers as identifying marks. */ static const uint32_t imx51_epit_ioaddr[2] = {0x73fac000, 0x73fb0000}; static const uint32_t imx53_epit_ioaddr[2] = {0x53fac000, 0x53fb0000}; static const uint32_t imx6_epit_ioaddr[2] = {0x020d0000, 0x020d4000}; /* ocd_data is number of units to instantiate on the platform */ static struct ofw_compat_data compat_data[] = { {"fsl,imx6ul-epit", 1}, {"fsl,imx6sx-epit", 1}, {"fsl,imx6q-epit", 1}, {"fsl,imx6dl-epit", 1}, {"fsl,imx53-epit", 2}, {"fsl,imx51-epit", 2}, {"fsl,imx31-epit", 2}, {"fsl,imx27-epit", 2}, {"fsl,imx25-epit", 2}, {NULL, 0} }; static inline uint32_t RD4(struct epit_softc *sc, bus_size_t offset) { return (bus_read_4(sc->memres, offset)); } static inline void WR4(struct epit_softc *sc, bus_size_t offset, uint32_t value) { bus_write_4(sc->memres, offset, value); } static inline void WR4B(struct epit_softc *sc, bus_size_t offset, uint32_t value) { bus_write_4(sc->memres, offset, value); bus_barrier(sc->memres, offset, 4, BUS_SPACE_BARRIER_WRITE); } static u_int epit_read_counter(struct epit_softc *sc) { /* * Hardware is a downcounter, adjust to look like it counts up for use * with timecounter and DELAY. */ return (0xffffffff - RD4(sc, EPIT_CNR)); } static void epit_do_delay(int usec, void *arg) { struct epit_softc *sc = arg; uint64_t curcnt, endcnt, startcnt, ticks; /* * Calculate the tick count with 64-bit values so that it works for any * clock frequency. Loop until the hardware count reaches start+ticks. * If the 32-bit hardware count rolls over while we're looping, just * manually do a carry into the high bits after each read; don't worry * that doing this on each loop iteration is inefficient -- we're trying * to waste time here. */ ticks = 1 + ((uint64_t)usec * sc->clkfreq) / 1000000; curcnt = startcnt = epit_read_counter(sc); endcnt = startcnt + ticks; while (curcnt < endcnt) { curcnt = epit_read_counter(sc); if (curcnt < startcnt) curcnt += 1ULL << 32; } } static u_int epit_tc_get_timecount(struct timecounter *tc) { return (epit_read_counter(tc->tc_priv)); } static int epit_tc_attach(struct epit_softc *sc) { /* When the counter hits zero, reload with 0xffffffff. Start it. */ WR4(sc, EPIT_LR, 0xffffffff); WR4(sc, EPIT_CR, sc->ctlreg | EPIT_CR_EN); /* Register as a timecounter. */ sc->tc.tc_name = "EPIT"; sc->tc.tc_quality = 1000; sc->tc.tc_frequency = sc->clkfreq; sc->tc.tc_counter_mask = 0xffffffff; sc->tc.tc_get_timecount = epit_tc_get_timecount; sc->tc.tc_priv = sc; tc_init(&sc->tc); /* We are the DELAY() implementation. */ arm_set_delay(epit_do_delay, sc); return (0); } static int epit_et_start(struct eventtimer *et, sbintime_t first, sbintime_t period) { struct epit_softc *sc; uint32_t ticks; sc = (struct epit_softc *)et->et_priv; /* * Disable the timer and clear any pending status. The timer may be * running or may have just expired if we're called to reschedule the * next event before the previous event time arrives. */ WR4(sc, EPIT_CR, sc->ctlreg); WR4(sc, EPIT_SR, EPIT_SR_OCIF); if (period != 0) { sc->oneshot = false; ticks = ((uint32_t)et->et_frequency * period) >> 32; } else if (first != 0) { sc->oneshot = true; ticks = ((uint32_t)et->et_frequency * first) >> 32; } else { return (EINVAL); } /* Set the countdown load register and start the timer. */ WR4(sc, EPIT_LR, ticks); WR4B(sc, EPIT_CR, sc->ctlreg | EPIT_CR_EN); return (0); } static int epit_et_stop(struct eventtimer *et) { struct epit_softc *sc; sc = (struct epit_softc *)et->et_priv; /* Disable the timer and clear any pending status. */ WR4(sc, EPIT_CR, sc->ctlreg); WR4B(sc, EPIT_SR, EPIT_SR_OCIF); return (0); } static int epit_intr(void *arg) { struct epit_softc *sc; uint32_t status; sc = arg; /* * Disable a one-shot timer until a new event is scheduled so that the * counter doesn't wrap and fire again. Do this before clearing the * status since a short period would make it fire again really soon. * * Clear interrupt status before invoking event callbacks. The callback * often sets up a new one-shot timer event and if the interval is short * enough it can fire before we get out of this function. If we cleared * at the bottom we'd miss the interrupt and hang until the clock wraps. */ if (sc->oneshot) WR4(sc, EPIT_CR, sc->ctlreg); status = RD4(sc, EPIT_SR); WR4B(sc, EPIT_SR, status); if ((status & EPIT_SR_OCIF) == 0) return (FILTER_STRAY); if (sc->et.et_active) sc->et.et_event_cb(&sc->et, sc->et.et_arg); return (FILTER_HANDLED); } static int epit_et_attach(struct epit_softc *sc) { int err, rid; rid = 0; sc->intres = bus_alloc_resource_any(sc->dev, SYS_RES_IRQ, &rid, RF_ACTIVE); if (sc->intres == NULL) { device_printf(sc->dev, "could not allocate interrupt\n"); return (ENXIO); } err = bus_setup_intr(sc->dev, sc->intres, INTR_TYPE_CLK | INTR_MPSAFE, epit_intr, NULL, sc, &sc->inthandle); if (err != 0) { device_printf(sc->dev, "unable to setup the irq handler\n"); return (err); } /* To be an eventtimer, we need interrupts enabled. */ sc->ctlreg |= EPIT_CR_OCIEN; /* Register as an eventtimer. */ sc->et.et_name = "EPIT"; sc->et.et_flags = ET_FLAGS_ONESHOT | ET_FLAGS_PERIODIC; sc->et.et_quality = 1000; sc->et.et_frequency = sc->clkfreq; sc->et.et_min_period = ((uint64_t)ET_MIN_TICKS << 32) / sc->clkfreq; sc->et.et_max_period = ((uint64_t)ET_MAX_TICKS << 32) / sc->clkfreq; sc->et.et_start = epit_et_start; sc->et.et_stop = epit_et_stop; sc->et.et_priv = sc; et_register(&sc->et); return (0); } static int epit_probe(device_t dev) { struct resource *memres; rman_res_t ioaddr; int num_units, rid, unit; if (!ofw_bus_status_okay(dev)) return (ENXIO); /* * The FDT data for imx5 and imx6 EPIT hardware is missing or broken, * but it may get fixed some day, so first just do a normal check. We * return success if the compatible string matches and we haven't * already instantiated the number of units needed on this platform. */ unit = device_get_unit(dev); num_units = ofw_bus_search_compatible(dev, compat_data)->ocd_data; if (unit < num_units) { device_set_desc(dev, "i.MX EPIT timer"); return (BUS_PROBE_DEFAULT); } /* * No compat string match, but for imx6 all the data we need is in the * node except the compat string, so do our own compatibility check * using the device name of the node and the register block address. */ if (strstr(ofw_bus_get_name(dev), "epit") == NULL) return (ENXIO); rid = 0; memres = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_UNMAPPED); if (memres == NULL) return (ENXIO); ioaddr = rman_get_start(memres); bus_free_resource(dev, SYS_RES_MEMORY, memres); if (imx_soc_family() == 6) { if (unit > 0) return (ENXIO); if (ioaddr != imx6_epit_ioaddr[unit]) return (ENXIO); } else { if (unit > 1) return (ENXIO); switch (imx_soc_type()) { case IMXSOC_51: if (ioaddr != imx51_epit_ioaddr[unit]) return (ENXIO); break; case IMXSOC_53: if (ioaddr != imx53_epit_ioaddr[unit]) return (ENXIO); break; default: return (ENXIO); } /* * XXX Right now we have no way to handle the fact that the * entire EPIT node is missing, which means no interrupt data. */ return (ENXIO); } device_set_desc(dev, "i.MX EPIT timer"); return (BUS_PROBE_DEFAULT); } static int epit_attach(device_t dev) { struct epit_softc *sc; int err, rid; uint32_t clksrc; sc = device_get_softc(dev); sc->dev = dev; rid = 0; sc->memres = bus_alloc_resource_any(sc->dev, SYS_RES_MEMORY, &rid, RF_ACTIVE); if (sc->memres == NULL) { device_printf(sc->dev, "could not allocate registers\n"); return (ENXIO); } /* * For now, use ipg (66 MHz). Some day we should get this from fdt. */ clksrc = EPIT_CR_CLKSRC_IPG; switch (clksrc) { default: device_printf(dev, "Unsupported clock source '%d', using IPG\n", clksrc); /* FALLTHROUGH */ case EPIT_CR_CLKSRC_IPG: sc->clkfreq = imx_ccm_ipg_hz(); break; case EPIT_CR_CLKSRC_HFCLK: sc->clkfreq = imx_ccm_perclk_hz(); break; case EPIT_CR_CLKSRC_LFCLK: sc->clkfreq = 32768; break; } /* * Init: stop operations and clear all options, then set up options and * clock source, then do a soft-reset and wait for it to complete. */ WR4(sc, EPIT_CR, 0); sc->ctlreg = (clksrc << EPIT_CR_CLKSRC_SHIFT) | /* Use selected clock */ EPIT_CR_ENMOD | /* Reload counter on enable */ EPIT_CR_RLD | /* Reload counter from LR */ EPIT_CR_STOPEN | /* Run in STOP mode */ EPIT_CR_WAITEN | /* Run in WAIT mode */ EPIT_CR_DBGEN; /* Run in DEBUG mode */ WR4B(sc, EPIT_CR, sc->ctlreg | EPIT_CR_SWR); while (RD4(sc, EPIT_CR) & EPIT_CR_SWR) continue; /* * Unit 0 is the timecounter, 1 (if instantiated) is the eventtimer. */ if (device_get_unit(sc->dev) == 0) err = epit_tc_attach(sc); else err = epit_et_attach(sc); return (err); } static device_method_t epit_methods[] = { DEVMETHOD(device_probe, epit_probe), DEVMETHOD(device_attach, epit_attach), DEVMETHOD_END }; static driver_t epit_driver = { "imx_epit", epit_methods, sizeof(struct epit_softc), }; static devclass_t epit_devclass; EARLY_DRIVER_MODULE(imx_epit, simplebus, epit_driver, epit_devclass, 0, 0, BUS_PASS_TIMER);