/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, Version 1.0 only * (the "License"). You may not use this file except in compliance * with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2005 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" /* * When the operating system detects that it is in an invalid state, a panic * is initiated in order to minimize potential damage to user data and to * facilitate debugging. There are three major tasks to be performed in * a system panic: recording information about the panic in memory (and thus * making it part of the crash dump), synchronizing the file systems to * preserve user file data, and generating the crash dump. We define the * system to be in one of four states with respect to the panic code: * * CALM - the state of the system prior to any thread initiating a panic * * QUIESCE - the state of the system when the first thread to initiate * a system panic records information about the cause of the panic * and renders the system quiescent by stopping other processors * * SYNC - the state of the system when we synchronize the file systems * DUMP - the state when we generate the crash dump. * * The transitions between these states are irreversible: once we begin * panicking, we only make one attempt to perform the actions associated with * each state. * * The panic code itself must be re-entrant because actions taken during any * state may lead to another system panic. Additionally, any Solaris * thread may initiate a panic at any time, and so we must have synchronization * between threads which attempt to initiate a state transition simultaneously. * The panic code makes use of a special locking primitive, a trigger, to * perform this synchronization. A trigger is simply a word which is set * atomically and can only be set once. We declare three triggers, one for * each transition between the four states. When a thread enters the panic * code it attempts to set each trigger; if it fails it moves on to the * next trigger. A special case is the first trigger: if two threads race * to perform the transition to QUIESCE, the losing thread may execute before * the winner has a chance to stop its CPU. To solve this problem, we have * the loser look ahead to see if any other triggers are set; if not, it * presumes a panic is underway and simply spins. Unfortunately, since we * are panicking, it is not possible to know this with absolute certainty. * * There are two common reasons for re-entering the panic code once a panic * has been initiated: (1) after we debug_enter() at the end of QUIESCE, * the operator may type "sync" instead of "go", and the PROM's sync callback * routine will invoke panic(); (2) if the clock routine decides that sync * or dump is not making progress, it will invoke panic() to force a timeout. * The design assumes that a third possibility, another thread causing an * unrelated panic while sync or dump is still underway, is extremely unlikely. * If this situation occurs, we may end up triggering dump while sync is * still in progress. This third case is considered extremely unlikely because * all other CPUs are stopped and low-level interrupts have been blocked. * * The panic code is entered via a call directly to the vpanic() function, * or its varargs wrappers panic() and cmn_err(9F). The vpanic routine * is implemented in assembly language to record the current machine * registers, attempt to set the trigger for the QUIESCE state, and * if successful, switch stacks on to the panic_stack before calling into * the common panicsys() routine. The first thread to initiate a panic * is allowed to make use of the reserved panic_stack so that executing * the panic code itself does not overwrite valuable data on that thread's * stack *ahead* of the current stack pointer. This data will be preserved * in the crash dump and may prove invaluable in determining what this * thread has previously been doing. The first thread, saved in panic_thread, * is also responsible for stopping the other CPUs as quickly as possible, * and then setting the various panic_* variables. Most important among * these is panicstr, which allows threads to subsequently bypass held * locks so that we can proceed without ever blocking. We must stop the * other CPUs *prior* to setting panicstr in case threads running there are * currently spinning to acquire a lock; we want that state to be preserved. * Every thread which initiates a panic has its T_PANIC flag set so we can * identify all such threads in the crash dump. * * The panic_thread is also allowed to make use of the special memory buffer * panicbuf, which on machines with appropriate hardware is preserved across * reboots. We allow the panic_thread to store its register set and panic * message in this buffer, so even if we fail to obtain a crash dump we will * be able to examine the machine after reboot and determine some of the * state at the time of the panic. If we do get a dump, the panic buffer * data is structured so that a debugger can easily consume the information * therein (see ). * * Each platform or architecture is required to implement the functions * panic_savetrap() to record trap-specific information to panicbuf, * panic_saveregs() to record a register set to panicbuf, panic_stopcpus() * to halt all CPUs but the panicking CPU, panic_quiesce_hw() to perform * miscellaneous platform-specific tasks *after* panicstr is set, * panic_showtrap() to print trap-specific information to the console, * and panic_dump_hw() to perform platform tasks prior to calling dumpsys(). * * A Note on Word Formation, courtesy of the Oxford Guide to English Usage: * * Words ending in -c interpose k before suffixes which otherwise would * indicate a soft c, and thus the verb and adjective forms of 'panic' are * spelled "panicked", "panicking", and "panicky" respectively. Use of * the ill-conceived "panicing" and "panic'd" is discouraged. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * Panic variables which are set once during the QUIESCE state by the * first thread to initiate a panic. These are examined by post-mortem * debugging tools; the inconsistent use of 'panic' versus 'panic_' in * the variable naming is historical and allows legacy tools to work. */ #pragma align STACK_ALIGN(panic_stack) char panic_stack[PANICSTKSIZE]; /* reserved stack for panic_thread */ kthread_t *panic_thread; /* first thread to call panicsys() */ cpu_t panic_cpu; /* cpu from first call to panicsys() */ label_t panic_regs; /* setjmp label from panic_thread */ struct regs *panic_reg; /* regs struct from first panicsys() */ char *volatile panicstr; /* format string to first panicsys() */ va_list panicargs; /* arguments to first panicsys() */ clock_t panic_lbolt; /* lbolt at time of panic */ int64_t panic_lbolt64; /* lbolt64 at time of panic */ hrtime_t panic_hrtime; /* hrtime at time of panic */ timespec_t panic_hrestime; /* hrestime at time of panic */ int panic_ipl; /* ipl on panic_cpu at time of panic */ ushort_t panic_schedflag; /* t_schedflag for panic_thread */ cpu_t *panic_bound_cpu; /* t_bound_cpu for panic_thread */ char panic_preempt; /* t_preempt for panic_thread */ /* * Panic variables which can be set via /etc/system or patched while * the system is in operation. Again, the stupid names are historic. */ char *panic_bootstr = NULL; /* mdboot string to use after panic */ int panic_bootfcn = AD_BOOT; /* mdboot function to use after panic */ int halt_on_panic = 0; /* halt after dump instead of reboot? */ int nopanicdebug = 0; /* reboot instead of call debugger? */ int in_sync = 0; /* skip vfs_syncall() and just dump? */ /* * The do_polled_io flag is set by the panic code to inform the SCSI subsystem * to use polled mode instead of interrupt-driven i/o. */ int do_polled_io = 0; /* * The panic_forced flag is set by the uadmin A_DUMP code to inform the * panic subsystem that it should not attempt an initial debug_enter. */ int panic_forced = 0; /* * Triggers for panic state transitions: */ int panic_quiesce; /* trigger for CALM -> QUIESCE */ int panic_sync; /* trigger for QUIESCE -> SYNC */ int panic_dump; /* trigger for SYNC -> DUMP */ void panicsys(const char *format, va_list alist, struct regs *rp, int on_panic_stack) { int s = spl8(); kthread_t *t = curthread; cpu_t *cp = CPU; caddr_t intr_stack = NULL; uint_t intr_actv; ushort_t schedflag = t->t_schedflag; cpu_t *bound_cpu = t->t_bound_cpu; char preempt = t->t_preempt; (void) setjmp(&t->t_pcb); t->t_flag |= T_PANIC; t->t_schedflag |= TS_DONT_SWAP; t->t_bound_cpu = cp; t->t_preempt++; panic_enter_hw(s); /* * If we're on the interrupt stack and an interrupt thread is available * in this CPU's pool, preserve the interrupt stack by detaching an * interrupt thread and making its stack the intr_stack. */ if (CPU_ON_INTR(cp) && cp->cpu_intr_thread != NULL) { kthread_t *it = cp->cpu_intr_thread; intr_stack = cp->cpu_intr_stack; intr_actv = cp->cpu_intr_actv; cp->cpu_intr_stack = thread_stk_init(it->t_stk); cp->cpu_intr_thread = it->t_link; /* * Clear only the high level bits of cpu_intr_actv. * We want to indicate that high-level interrupts are * not active without destroying the low-level interrupt * information stored there. */ cp->cpu_intr_actv &= ((1 << (LOCK_LEVEL + 1)) - 1); } /* * Record one-time panic information and quiesce the other CPUs. * Then print out the panic message and stack trace. */ if (on_panic_stack) { panic_data_t *pdp = (panic_data_t *)panicbuf; pdp->pd_version = PANICBUFVERS; pdp->pd_msgoff = sizeof (panic_data_t) - sizeof (panic_nv_t); if (t->t_panic_trap != NULL) panic_savetrap(pdp, t->t_panic_trap); else panic_saveregs(pdp, rp); (void) vsnprintf(&panicbuf[pdp->pd_msgoff], PANICBUFSIZE - pdp->pd_msgoff, format, alist); /* * Call into the platform code to stop the other CPUs. * We currently have all interrupts blocked, and expect that * the platform code will lower ipl only as far as needed to * perform cross-calls, and will acquire as *few* locks as is * possible -- panicstr is not set so we can still deadlock. */ panic_stopcpus(cp, t, s); panicstr = (char *)format; va_copy(panicargs, alist); panic_lbolt = lbolt; panic_lbolt64 = lbolt64; panic_hrestime = hrestime; panic_hrtime = gethrtime_waitfree(); panic_thread = t; panic_regs = t->t_pcb; panic_reg = rp; panic_cpu = *cp; panic_ipl = spltoipl(s); panic_schedflag = schedflag; panic_bound_cpu = bound_cpu; panic_preempt = preempt; if (intr_stack != NULL) { panic_cpu.cpu_intr_stack = intr_stack; panic_cpu.cpu_intr_actv = intr_actv; } /* * Lower ipl to 10 to keep clock() from running, but allow * keyboard interrupts to enter the debugger. These callbacks * are executed with panicstr set so they can bypass locks. */ splx(ipltospl(CLOCK_LEVEL)); panic_quiesce_hw(pdp); (void) FTRACE_STOP(); (void) callb_execute_class(CB_CL_PANIC, NULL); if (log_intrq != NULL) log_flushq(log_intrq); /* * If log_consq has been initialized and syslogd has started, * print any messages in log_consq that haven't been consumed. */ if (log_consq != NULL && log_consq != log_backlogq) log_printq(log_consq); fm_banner(); errorq_panic(); printf("\n\rpanic[cpu%d]/thread=%p: ", cp->cpu_id, (void *)t); vprintf(format, alist); printf("\n\n"); if (t->t_panic_trap != NULL) { panic_showtrap(t->t_panic_trap); printf("\n"); } traceregs(rp); printf("\n"); if (((boothowto & RB_DEBUG) || obpdebug) && !nopanicdebug && !panic_forced) { if (dumpvp != NULL) { debug_enter("panic: entering debugger " "(continue to save dump)"); } else { debug_enter("panic: entering debugger " "(no dump device, continue to reboot)"); } } } else if (panic_dump != 0 || panic_sync != 0 || panicstr != NULL) { printf("\n\rpanic[cpu%d]/thread=%p: ", cp->cpu_id, (void *)t); vprintf(format, alist); printf("\n"); } else goto spin; /* * Prior to performing sync or dump, we make sure that do_polled_io is * set, but we'll leave ipl at 10; deadman(), a CY_HIGH_LEVEL cyclic, * will re-enter panic if we are not making progress with sync or dump. */ /* * Sync the filesystems. Reset t_cred if not set because much of * the filesystem code depends on CRED() being valid. */ if (!in_sync && panic_trigger(&panic_sync)) { if (t->t_cred == NULL) t->t_cred = kcred; splx(ipltospl(CLOCK_LEVEL)); do_polled_io = 1; vfs_syncall(); } /* * Take the crash dump. If the dump trigger is already set, try to * enter the debugger again before rebooting the system. */ if (panic_trigger(&panic_dump)) { panic_dump_hw(s); splx(ipltospl(CLOCK_LEVEL)); do_polled_io = 1; dumpsys(); } else if (((boothowto & RB_DEBUG) || obpdebug) && !nopanicdebug) { debug_enter("panic: entering debugger (continue to reboot)"); } else printf("dump aborted: please record the above information!\n"); if (halt_on_panic) mdboot(A_REBOOT, AD_HALT, NULL, B_FALSE); else mdboot(A_REBOOT, panic_bootfcn, panic_bootstr, B_FALSE); spin: /* * Restore ipl to at most CLOCK_LEVEL so we don't end up spinning * and unable to jump into the debugger. */ splx(MIN(s, ipltospl(CLOCK_LEVEL))); for (;;); } void panic(const char *format, ...) { va_list alist; va_start(alist, format); vpanic(format, alist); va_end(alist); }