/* $NetBSD: qms.c,v 1.1 2001/10/05 22:27:42 reinoud Exp $ */ /* * Copyright (c) Scott Stevens 1995 All rights reserved * Copyright (c) Melvin Tang-Richardson 1995 All rights reserved * Copyright (c) Mark Brinicombe 1995 All rights reserved * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed for the NetBSD Project. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Quadrature mouse driver */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define MOUSE_IOC_ACK #define QMOUSE_BSIZE 12*64 #ifdef MOUSE_IOC_ACK static void qmsputbuffer __P((struct qms_softc *sc, struct mousebufrec *buf)); #endif extern struct cfdriver qms_cd; /* qms device structure */ /* Offsets of hardware registers */ #define QMS_MOUSEX 0 /* 16 bit X register */ #define QMS_MOUSEY 1 /* 16 bit Y register */ #define QMS_BUTTONS 0 /* mouse buttons register */ /* * generic attach routine. This does the generic part of the driver * attachment and is called from the bus specific attach routine. */ void qmsattach(sc) struct qms_softc *sc; { /* Set up origin and multipliers */ sc->origx = 0; sc->origy = 0; sc->xmult = 2; sc->ymult = 2; /* Set up bounding box */ sc->boundx = -4095; sc->boundy = -4095; sc->bounda = 4096; sc->boundb = 4096; sc->sc_state = 0; /* Set the mouse X & Y registers to a known state */ bus_space_write_4(sc->sc_iot, sc->sc_ioh, QMS_MOUSEX, sc->origx); bus_space_write_4(sc->sc_iot, sc->sc_ioh, QMS_MOUSEX, sc->origx); } int qmsopen(dev, flag, mode, p) dev_t dev; int flag; int mode; struct proc *p; { struct qms_softc *sc; int unit = minor(dev); /* validate the unit and softc */ if (unit >= qms_cd.cd_ndevs) return(ENXIO); sc = qms_cd.cd_devs[unit]; if (!sc) return(ENXIO); /* check if we are already open */ if (sc->sc_state & QMOUSE_OPEN) return(EBUSY); /* update softc */ sc->sc_proc = p; sc->lastx = -1; sc->lasty = -1; sc->lastb = -1; /* initialise buffer */ if (clalloc(&sc->sc_buffer, QMOUSE_BSIZE, 0) == -1) return(ENOMEM); /* set mode and state */ sc->sc_mode = MOUSEMODE_ABS; sc->sc_state |= QMOUSE_OPEN; /* enable interrupts */ sc->sc_intenable(sc, 1); return(0); } int qmsclose(dev, flag, mode, p) dev_t dev; int flag; int mode; struct proc *p; { int unit = minor(dev); struct qms_softc *sc = qms_cd.cd_devs[unit]; /* disable interrupts */ sc->sc_intenable(sc, 0); /* clean up */ sc->sc_proc = NULL; sc->sc_state = 0; clfree(&sc->sc_buffer); return(0); } int qmsread(dev, uio, flag) dev_t dev; struct uio *uio; int flag; { int unit = minor(dev); struct qms_softc *sc = qms_cd.cd_devs[unit]; int error; int s; int length; u_char buffer[128]; error = 0; s = spltty(); while (sc->sc_buffer.c_cc == 0) { if (flag & IO_NDELAY) { (void)splx(s); return(EWOULDBLOCK); } sc->sc_state |= QMOUSE_ASLEEP; if ((error = tsleep((caddr_t)sc, PZERO | PCATCH, "qmsread", 0))) { sc->sc_state &= ~QMOUSE_ASLEEP; (void)splx(s); return(error); } } while (sc->sc_buffer.c_cc > 0 && uio->uio_resid > 0) { length = min(sc->sc_buffer.c_cc, uio->uio_resid); if(length>sizeof(buffer)) length=sizeof(buffer); (void)q_to_b(&sc->sc_buffer, buffer, length); if ((error = (uiomove(buffer, length, uio)))) break; } (void)splx(s); return(error); } #define FMT_START \ int x = bus_space_read_4(sc->sc_iot, sc->sc_ioh, QMS_MOUSEX) & 0xffff; \ int y = bus_space_read_4(sc->sc_iot, sc->sc_ioh, QMS_MOUSEY) & 0xffff; \ int b = bus_space_read_1(sc->sc_iot, sc->sc_butioh, QMS_BUTTONS) & 0x70;\ if (x & 0x8000) x |= 0xffff0000; \ if (y & 0x8000) y |= 0xffff0000; \ x = (x - sc->origx); \ y = (y - sc->origy); \ if (x < (sc->boundx)) x = sc->boundx; \ if (x > (sc->bounda)) x = sc->bounda; \ bus_space_write_4(sc->sc_iot, sc->sc_ioh, QMS_MOUSEX, x + sc->origx); \ if (y < (sc->boundy)) y = sc->boundy; \ if (y > (sc->boundb)) y = sc->boundb; \ bus_space_write_4(sc->sc_iot, sc->sc_ioh, QMS_MOUSEY, y + sc->origy); \ x = x * sc->xmult; \ y = y * sc->ymult; #define FMT_END int qmsioctl(dev, cmd, data, flag, p) dev_t dev; u_long cmd; caddr_t data; int flag; struct proc *p; { struct qms_softc *sc = qms_cd.cd_devs[minor(dev)]; switch (cmd) { case MOUSEIOC_WRITEX: bus_space_write_4(sc->sc_iot, sc->sc_ioh, QMS_MOUSEX, *(int *)data + sc->origx); return 0; case MOUSEIOC_WRITEY: bus_space_write_4(sc->sc_iot, sc->sc_ioh, QMS_MOUSEY, *(int *)data + sc->origy); return 0; case MOUSEIOC_SETSTATE: { struct mouse_state *co = (void *)data; bus_space_write_4(sc->sc_iot, sc->sc_ioh, QMS_MOUSEX, co->x); bus_space_write_4(sc->sc_iot, sc->sc_ioh, QMS_MOUSEY, co->y); return 0; } case MOUSEIOC_SETBOUNDS: { struct mouse_boundingbox *bo = (void *)data; struct mousebufrec buffer; #ifdef MOUSE_IOC_ACK int s; s = spltty(); #endif sc->boundx = bo->x; sc->boundy = bo->y; sc->bounda = bo->a; sc->boundb = bo->b; buffer.status = IOC_ACK; buffer.x = sc->origx; buffer.y = sc->origy; #ifdef MOUSE_IOC_ACK if (sc->sc_buffer.c_cc > 0) printf("%s: setting bounding with non empty buffer (%d)\n", sc->sc_device.dv_xname, sc->sc_buffer.c_cc); qmsputbuffer(sc, &buffer); (void)splx(s); #endif return 0; } case MOUSEIOC_SETMODE: { struct mousebufrec buffer; #ifdef MOUSE_IOC_ACK int s; s = spltty(); #endif sc->sc_mode = *(int *)data; buffer.status = IOC_ACK; buffer.x = sc->origx; buffer.y = sc->origy; #ifdef MOUSE_IOC_ACK if (sc->sc_buffer.c_cc > 0) printf("%s: setting mode with non empty buffer (%d)\n", sc->sc_device.dv_xname, sc->sc_buffer.c_cc); qmsputbuffer(sc, &buffer); (void)splx(s); #endif return 0; } case MOUSEIOC_SETORIGIN: { struct mouse_origin *oo = (void *)data; struct mousebufrec buffer; #ifdef MOUSE_IOC_ACK int s; s = spltty(); #endif /* Need to fix up! */ sc->origx = oo->x; sc->origy = oo->y; buffer.status = IOC_ACK; buffer.x = sc->origx; buffer.y = sc->origy; #ifdef MOUSE_IOC_ACK if (sc->sc_buffer.c_cc > 0) printf("%s: setting origin with non empty buffer (%d)\n", sc->sc_device.dv_xname, sc->sc_buffer.c_cc); qmsputbuffer(sc, &buffer); (void)splx(s); #endif return 0; } case MOUSEIOC_GETSTATE: { struct mouse_state *co = (void *)data; FMT_START co->x = x; co->y = y; co->buttons = b ^ 0x70; FMT_END return 0; } case MOUSEIOC_GETBOUNDS: { struct mouse_boundingbox *bo = (void *)data; bo->x = sc->boundx; bo->y = sc->boundy; bo->a = sc->bounda; bo->b = sc->boundb; return 0; } case MOUSEIOC_GETORIGIN: { struct mouse_origin *oo = (void *)data; oo->x = sc->origx; oo->y = sc->origy; return 0; } } return (EINVAL); } int qmsintr(arg) void *arg; { struct qms_softc *sc = arg; int s; struct mousebufrec buffer; int dosignal=0; FMT_START b &= 0x70; b >>= 4; if (x != sc->lastx || y != sc->lasty || b != sc->lastb) { /* Mouse state changed */ buffer.status = b | ( b ^ sc->lastb) << 3 | (((x==sc->lastx) && (y==sc->lasty))?0:MOVEMENT); if(sc->sc_mode == MOUSEMODE_REL) { sc->origx = sc->origy = 0; bus_space_write_4(sc->sc_iot, sc->sc_ioh, QMS_MOUSEX, sc->origx); bus_space_write_4(sc->sc_iot, sc->sc_ioh, QMS_MOUSEY, sc->origy); } buffer.x = x; buffer.y = y; microtime(&buffer.event_time); if (sc->sc_buffer.c_cc == 0) dosignal = 1; s = spltty(); (void)b_to_q((char *)&buffer, sizeof(buffer), &sc->sc_buffer); (void)splx(s); selwakeup(&sc->sc_rsel); if (sc->sc_state & QMOUSE_ASLEEP) { sc->sc_state &= ~QMOUSE_ASLEEP; wakeup((caddr_t)sc); } /* if (dosignal)*/ psignal(sc->sc_proc, SIGIO); sc->lastx = x; sc->lasty = y; sc->lastb = b; } FMT_END return(0); /* Pass interrupt on down the chain */ } int qmspoll(dev, events, p) dev_t dev; int events; struct proc *p; { struct qms_softc *sc = qms_cd.cd_devs[minor(dev)]; int revents = 0; int s = spltty(); if (events & (POLLIN | POLLRDNORM)) { if (sc->sc_buffer.c_cc > 0) revents |= events & (POLLIN | POLLRDNORM); else selrecord(p, &sc->sc_rsel); } (void)splx(s); return (revents); } #ifdef MOUSE_IOC_ACK static void qmsputbuffer(sc, buffer) struct qms_softc *sc; struct mousebufrec *buffer; { int s; int dosignal = 0; /* Time stamp the buffer */ microtime(&buffer->event_time); if (sc->sc_buffer.c_cc == 0) dosignal=1; s = spltty(); (void)b_to_q((char *)buffer, sizeof(*buffer), &sc->sc_buffer); (void)splx(s); selwakeup(&sc->sc_rsel); if (sc->sc_state & QMOUSE_ASLEEP) { sc->sc_state &= ~QMOUSE_ASLEEP; wakeup((caddr_t)sc); } if (dosignal) psignal(sc->sc_proc, SIGIO); } #endif /* End of qms.c */