/* * Copyright (c) 1990, 1991, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from the Stanford/CMU enet packet filter, * (net/enet.c) distributed as part of 4.3BSD, and code contributed * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence * Berkeley Laboratory. * * %sccs.include.redist.c% * * @(#)bpf.c 8.4 (Berkeley) 01/09/95 * * static char rcsid[] = * "$Header: bpf.c,v 1.33 91/10/27 21:21:58 mccanne Exp $"; */ #include "bpfilter.h" #if NBPFILTER > 0 #include #include #include #include #include #include #include #include #include #include #if defined(sparc) && BSD < 199103 #include #endif #include #include #include #include #include #include #include #include #include #include #include /* * Older BSDs don't have kernel malloc. */ #if BSD < 199103 extern bcopy(); static caddr_t bpf_alloc(); #include #define BPF_BUFSIZE (MCLBYTES-8) #define UIOMOVE(cp, len, code, uio) uiomove(cp, len, code, uio) #else #define BPF_BUFSIZE 4096 #define UIOMOVE(cp, len, code, uio) uiomove(cp, len, uio) #endif #define PRINET 26 /* interruptible */ /* * The default read buffer size is patchable. */ int bpf_bufsize = BPF_BUFSIZE; /* * bpf_iflist is the list of interfaces; each corresponds to an ifnet * bpf_dtab holds the descriptors, indexed by minor device # */ struct bpf_if *bpf_iflist; struct bpf_d bpf_dtab[NBPFILTER]; #if BSD >= 199207 /* * bpfilterattach() is called at boot time in new systems. We do * nothing here since old systems will not call this. */ /* ARGSUSED */ void bpfilterattach(n) int n; { } #endif static int bpf_allocbufs __P((struct bpf_d *)); static int bpf_allocbufs __P((struct bpf_d *)); static void bpf_freed __P((struct bpf_d *)); static void bpf_freed __P((struct bpf_d *)); static void bpf_ifname __P((struct ifnet *, struct ifreq *)); static void bpf_ifname __P((struct ifnet *, struct ifreq *)); static void bpf_mcopy __P((const void *, void *, u_int)); static int bpf_movein __P((struct uio *, int, struct mbuf **, struct sockaddr *, int *)); static int bpf_setif __P((struct bpf_d *, struct ifreq *)); static int bpf_setif __P((struct bpf_d *, struct ifreq *)); static __inline void bpf_wakeup __P((struct bpf_d *)); static void catchpacket __P((struct bpf_d *, u_char *, u_int, u_int, void (*)(const void *, void *, u_int))); static void reset_d __P((struct bpf_d *)); static int bpf_movein(uio, linktype, mp, sockp, datlen) register struct uio *uio; int linktype, *datlen; register struct mbuf **mp; register struct sockaddr *sockp; { struct mbuf *m; int error; int len; int hlen; /* * Build a sockaddr based on the data link layer type. * We do this at this level because the ethernet header * is copied directly into the data field of the sockaddr. * In the case of SLIP, there is no header and the packet * is forwarded as is. * Also, we are careful to leave room at the front of the mbuf * for the link level header. */ switch (linktype) { case DLT_SLIP: sockp->sa_family = AF_INET; hlen = 0; break; case DLT_EN10MB: sockp->sa_family = AF_UNSPEC; /* XXX Would MAXLINKHDR be better? */ hlen = sizeof(struct ether_header); break; case DLT_FDDI: sockp->sa_family = AF_UNSPEC; /* XXX 4(FORMAC)+6(dst)+6(src)+3(LLC)+5(SNAP) */ hlen = 24; break; case DLT_NULL: sockp->sa_family = AF_UNSPEC; hlen = 0; break; default: return (EIO); } len = uio->uio_resid; *datlen = len - hlen; if ((unsigned)len > MCLBYTES) return (EIO); MGET(m, M_WAIT, MT_DATA); if (m == 0) return (ENOBUFS); if (len > MLEN) { #if BSD >= 199103 MCLGET(m, M_WAIT); if ((m->m_flags & M_EXT) == 0) { #else MCLGET(m); if (m->m_len != MCLBYTES) { #endif error = ENOBUFS; goto bad; } } m->m_len = len; *mp = m; /* * Make room for link header. */ if (hlen != 0) { m->m_len -= hlen; #if BSD >= 199103 m->m_data += hlen; /* XXX */ #else m->m_off += hlen; #endif error = UIOMOVE((caddr_t)sockp->sa_data, hlen, UIO_WRITE, uio); if (error) goto bad; } error = UIOMOVE(mtod(m, caddr_t), len - hlen, UIO_WRITE, uio); if (!error) return (0); bad: m_freem(m); return (error); } /* * Attach file to the bpf interface, i.e. make d listen on bp. * Must be called at splimp. */ static void bpf_attachd(d, bp) struct bpf_d *d; struct bpf_if *bp; { /* * Point d at bp, and add d to the interface's list of listeners. * Finally, point the driver's bpf cookie at the interface so * it will divert packets to bpf. */ d->bd_bif = bp; d->bd_next = bp->bif_dlist; bp->bif_dlist = d; *bp->bif_driverp = bp; } /* * Detach a file from its interface. */ static void bpf_detachd(d) struct bpf_d *d; { struct bpf_d **p; struct bpf_if *bp; bp = d->bd_bif; /* * Check if this descriptor had requested promiscuous mode. * If so, turn it off. */ if (d->bd_promisc) { d->bd_promisc = 0; if (ifpromisc(bp->bif_ifp, 0)) /* * Something is really wrong if we were able to put * the driver into promiscuous mode, but can't * take it out. */ panic("bpf: ifpromisc failed"); } /* Remove d from the interface's descriptor list. */ p = &bp->bif_dlist; while (*p != d) { p = &(*p)->bd_next; if (*p == 0) panic("bpf_detachd: descriptor not in list"); } *p = (*p)->bd_next; if (bp->bif_dlist == 0) /* * Let the driver know that there are no more listeners. */ *d->bd_bif->bif_driverp = 0; d->bd_bif = 0; } /* * Mark a descriptor free by making it point to itself. * This is probably cheaper than marking with a constant since * the address should be in a register anyway. */ #define D_ISFREE(d) ((d) == (d)->bd_next) #define D_MARKFREE(d) ((d)->bd_next = (d)) #define D_MARKUSED(d) ((d)->bd_next = 0) /* * Open ethernet device. Returns ENXIO for illegal minor device number, * EBUSY if file is open by another process. */ /* ARGSUSED */ int bpfopen(dev, flag) dev_t dev; int flag; { register struct bpf_d *d; if (minor(dev) >= NBPFILTER) return (ENXIO); /* * Each minor can be opened by only one process. If the requested * minor is in use, return EBUSY. */ d = &bpf_dtab[minor(dev)]; if (!D_ISFREE(d)) return (EBUSY); /* Mark "free" and do most initialization. */ bzero((char *)d, sizeof(*d)); d->bd_bufsize = bpf_bufsize; return (0); } /* * Close the descriptor by detaching it from its interface, * deallocating its buffers, and marking it free. */ /* ARGSUSED */ int bpfclose(dev, flag) dev_t dev; int flag; { register struct bpf_d *d = &bpf_dtab[minor(dev)]; register int s; s = splimp(); if (d->bd_bif) bpf_detachd(d); splx(s); bpf_freed(d); return (0); } /* * Support for SunOS, which does not have tsleep. */ #if BSD < 199103 static bpf_timeout(arg) caddr_t arg; { struct bpf_d *d = (struct bpf_d *)arg; d->bd_timedout = 1; wakeup(arg); } #define BPF_SLEEP(chan, pri, s, t) bpf_sleep((struct bpf_d *)chan) int bpf_sleep(d) register struct bpf_d *d; { register int rto = d->bd_rtout; register int st; if (rto != 0) { d->bd_timedout = 0; timeout(bpf_timeout, (caddr_t)d, rto); } st = sleep((caddr_t)d, PRINET|PCATCH); if (rto != 0) { if (d->bd_timedout == 0) untimeout(bpf_timeout, (caddr_t)d); else if (st == 0) return EWOULDBLOCK; } return (st != 0) ? EINTR : 0; } #else #define BPF_SLEEP tsleep #endif /* * Rotate the packet buffers in descriptor d. Move the store buffer * into the hold slot, and the free buffer into the store slot. * Zero the length of the new store buffer. */ #define ROTATE_BUFFERS(d) \ (d)->bd_hbuf = (d)->bd_sbuf; \ (d)->bd_hlen = (d)->bd_slen; \ (d)->bd_sbuf = (d)->bd_fbuf; \ (d)->bd_slen = 0; \ (d)->bd_fbuf = 0; /* * bpfread - read next chunk of packets from buffers */ int bpfread(dev, uio) dev_t dev; register struct uio *uio; { register struct bpf_d *d = &bpf_dtab[minor(dev)]; int error; int s; /* * Restrict application to use a buffer the same size as * as kernel buffers. */ if (uio->uio_resid != d->bd_bufsize) return (EINVAL); s = splimp(); /* * If the hold buffer is empty, then do a timed sleep, which * ends when the timeout expires or when enough packets * have arrived to fill the store buffer. */ while (d->bd_hbuf == 0) { if (d->bd_immediate && d->bd_slen != 0) { /* * A packet(s) either arrived since the previous * read or arrived while we were asleep. * Rotate the buffers and return what's here. */ ROTATE_BUFFERS(d); break; } error = BPF_SLEEP((caddr_t)d, PRINET|PCATCH, "bpf", d->bd_rtout); if (error == EINTR || error == ERESTART) { splx(s); return (error); } if (error == EWOULDBLOCK) { /* * On a timeout, return what's in the buffer, * which may be nothing. If there is something * in the store buffer, we can rotate the buffers. */ if (d->bd_hbuf) /* * We filled up the buffer in between * getting the timeout and arriving * here, so we don't need to rotate. */ break; if (d->bd_slen == 0) { splx(s); return (0); } ROTATE_BUFFERS(d); break; } } /* * At this point, we know we have something in the hold slot. */ splx(s); /* * Move data from hold buffer into user space. * We know the entire buffer is transferred since * we checked above that the read buffer is bpf_bufsize bytes. */ error = UIOMOVE(d->bd_hbuf, d->bd_hlen, UIO_READ, uio); s = splimp(); d->bd_fbuf = d->bd_hbuf; d->bd_hbuf = 0; d->bd_hlen = 0; splx(s); return (error); } /* * If there are processes sleeping on this descriptor, wake them up. */ static __inline void bpf_wakeup(d) register struct bpf_d *d; { wakeup((caddr_t)d); #if BSD >= 199103 selwakeup(&d->bd_sel); /* XXX */ d->bd_sel.si_pid = 0; #else if (d->bd_selproc) { selwakeup(d->bd_selproc, (int)d->bd_selcoll); d->bd_selcoll = 0; d->bd_selproc = 0; } #endif } int bpfwrite(dev, uio) dev_t dev; struct uio *uio; { register struct bpf_d *d = &bpf_dtab[minor(dev)]; struct ifnet *ifp; struct mbuf *m; int error, s; static struct sockaddr dst; int datlen; if (d->bd_bif == 0) return (ENXIO); ifp = d->bd_bif->bif_ifp; if (uio->uio_resid == 0) return (0); error = bpf_movein(uio, (int)d->bd_bif->bif_dlt, &m, &dst, &datlen); if (error) return (error); if (datlen > ifp->if_mtu) return (EMSGSIZE); s = splnet(); #if BSD >= 199103 error = (*ifp->if_output)(ifp, m, &dst, (struct rtentry *)0); #else error = (*ifp->if_output)(ifp, m, &dst); #endif splx(s); /* * The driver frees the mbuf. */ return (error); } /* * Reset a descriptor by flushing its packet buffer and clearing the * receive and drop counts. Should be called at splimp. */ static void reset_d(d) struct bpf_d *d; { if (d->bd_hbuf) { /* Free the hold buffer. */ d->bd_fbuf = d->bd_hbuf; d->bd_hbuf = 0; } d->bd_slen = 0; d->bd_hlen = 0; d->bd_rcount = 0; d->bd_dcount = 0; } /* * FIONREAD Check for read packet available. * SIOCGIFADDR Get interface address - convenient hook to driver. * BIOCGBLEN Get buffer len [for read()]. * BIOCSETF Set ethernet read filter. * BIOCFLUSH Flush read packet buffer. * BIOCPROMISC Put interface into promiscuous mode. * BIOCGDLT Get link layer type. * BIOCGETIF Get interface name. * BIOCSETIF Set interface. * BIOCSRTIMEOUT Set read timeout. * BIOCGRTIMEOUT Get read timeout. * BIOCGSTATS Get packet stats. * BIOCIMMEDIATE Set immediate mode. * BIOCVERSION Get filter language version. */ /* ARGSUSED */ int bpfioctl(dev, cmd, addr, flag) dev_t dev; u_long cmd; caddr_t addr; int flag; { register struct bpf_d *d = &bpf_dtab[minor(dev)]; int s, error = 0; switch (cmd) { default: error = EINVAL; break; /* * Check for read packet available. */ case FIONREAD: { int n; s = splimp(); n = d->bd_slen; if (d->bd_hbuf) n += d->bd_hlen; splx(s); *(int *)addr = n; break; } case SIOCGIFADDR: { struct ifnet *ifp; if (d->bd_bif == 0) error = EINVAL; else { ifp = d->bd_bif->bif_ifp; error = (*ifp->if_ioctl)(ifp, cmd, addr); } break; } /* * Get buffer len [for read()]. */ case BIOCGBLEN: *(u_int *)addr = d->bd_bufsize; break; /* * Set buffer length. */ case BIOCSBLEN: #if BSD < 199103 error = EINVAL; #else if (d->bd_bif != 0) error = EINVAL; else { register u_int size = *(u_int *)addr; if (size > BPF_MAXBUFSIZE) *(u_int *)addr = size = BPF_MAXBUFSIZE; else if (size < BPF_MINBUFSIZE) *(u_int *)addr = size = BPF_MINBUFSIZE; d->bd_bufsize = size; } #endif break; /* * Set link layer read filter. */ case BIOCSETF: error = bpf_setf(d, (struct bpf_program *)addr); break; /* * Flush read packet buffer. */ case BIOCFLUSH: s = splimp(); reset_d(d); splx(s); break; /* * Put interface into promiscuous mode. */ case BIOCPROMISC: if (d->bd_bif == 0) { /* * No interface attached yet. */ error = EINVAL; break; } s = splimp(); if (d->bd_promisc == 0) { error = ifpromisc(d->bd_bif->bif_ifp, 1); if (error == 0) d->bd_promisc = 1; } splx(s); break; /* * Get device parameters. */ case BIOCGDLT: if (d->bd_bif == 0) error = EINVAL; else *(u_int *)addr = d->bd_bif->bif_dlt; break; /* * Set interface name. */ case BIOCGETIF: if (d->bd_bif == 0) error = EINVAL; else bpf_ifname(d->bd_bif->bif_ifp, (struct ifreq *)addr); break; /* * Set interface. */ case BIOCSETIF: error = bpf_setif(d, (struct ifreq *)addr); break; /* * Set read timeout. */ case BIOCSRTIMEOUT: { struct timeval *tv = (struct timeval *)addr; u_long msec; /* Compute number of milliseconds. */ msec = tv->tv_sec * 1000 + tv->tv_usec / 1000; /* Scale milliseconds to ticks. Assume hard clock has millisecond or greater resolution (i.e. tick >= 1000). For 10ms hardclock, tick/1000 = 10, so rtout<-msec/10. */ d->bd_rtout = msec / (tick / 1000); break; } /* * Get read timeout. */ case BIOCGRTIMEOUT: { struct timeval *tv = (struct timeval *)addr; u_long msec = d->bd_rtout; msec *= tick / 1000; tv->tv_sec = msec / 1000; tv->tv_usec = msec % 1000; break; } /* * Get packet stats. */ case BIOCGSTATS: { struct bpf_stat *bs = (struct bpf_stat *)addr; bs->bs_recv = d->bd_rcount; bs->bs_drop = d->bd_dcount; break; } /* * Set immediate mode. */ case BIOCIMMEDIATE: d->bd_immediate = *(u_int *)addr; break; case BIOCVERSION: { struct bpf_version *bv = (struct bpf_version *)addr; bv->bv_major = BPF_MAJOR_VERSION; bv->bv_minor = BPF_MINOR_VERSION; break; } } return (error); } /* * Set d's packet filter program to fp. If this file already has a filter, * free it and replace it. Returns EINVAL for bogus requests. */ int bpf_setf(d, fp) struct bpf_d *d; struct bpf_program *fp; { struct bpf_insn *fcode, *old; u_int flen, size; int s; old = d->bd_filter; if (fp->bf_insns == 0) { if (fp->bf_len != 0) return (EINVAL); s = splimp(); d->bd_filter = 0; reset_d(d); splx(s); if (old != 0) free((caddr_t)old, M_DEVBUF); return (0); } flen = fp->bf_len; if (flen > BPF_MAXINSNS) return (EINVAL); size = flen * sizeof(*fp->bf_insns); fcode = (struct bpf_insn *)malloc(size, M_DEVBUF, M_WAITOK); if (copyin((caddr_t)fp->bf_insns, (caddr_t)fcode, size) == 0 && bpf_validate(fcode, (int)flen)) { s = splimp(); d->bd_filter = fcode; reset_d(d); splx(s); if (old != 0) free((caddr_t)old, M_DEVBUF); return (0); } free((caddr_t)fcode, M_DEVBUF); return (EINVAL); } /* * Detach a file from its current interface (if attached at all) and attach * to the interface indicated by the name stored in ifr. * Return an errno or 0. */ static int bpf_setif(d, ifr) struct bpf_d *d; struct ifreq *ifr; { struct bpf_if *bp; char *cp; int unit, s, error; /* * Separate string into name part and unit number. Put a null * byte at the end of the name part, and compute the number. * If the a unit number is unspecified, the default is 0, * as initialized above. XXX This should be common code. */ unit = 0; cp = ifr->ifr_name; cp[sizeof(ifr->ifr_name) - 1] = '\0'; while (*cp++) { if (*cp >= '0' && *cp <= '9') { unit = *cp - '0'; *cp++ = '\0'; while (*cp) unit = 10 * unit + *cp++ - '0'; break; } } /* * Look through attached interfaces for the named one. */ for (bp = bpf_iflist; bp != 0; bp = bp->bif_next) { struct ifnet *ifp = bp->bif_ifp; if (ifp == 0 || unit != ifp->if_unit || strcmp(ifp->if_name, ifr->ifr_name) != 0) continue; /* * We found the requested interface. * If it's not up, return an error. * Allocate the packet buffers if we need to. * If we're already attached to requested interface, * just flush the buffer. */ if ((ifp->if_flags & IFF_UP) == 0) return (ENETDOWN); if (d->bd_sbuf == 0) { error = bpf_allocbufs(d); if (error != 0) return (error); } s = splimp(); if (bp != d->bd_bif) { if (d->bd_bif) /* * Detach if attached to something else. */ bpf_detachd(d); bpf_attachd(d, bp); } reset_d(d); splx(s); return (0); } /* Not found. */ return (ENXIO); } /* * Convert an interface name plus unit number of an ifp to a single * name which is returned in the ifr. */ static void bpf_ifname(ifp, ifr) struct ifnet *ifp; struct ifreq *ifr; { char *s = ifp->if_name; char *d = ifr->ifr_name; while (*d++ = *s++) continue; /* XXX Assume that unit number is less than 10. */ *d++ = ifp->if_unit + '0'; *d = '\0'; } /* * The new select interface passes down the proc pointer; the old select * stubs had to grab it out of the user struct. This glue allows either case. */ #if BSD >= 199103 #define bpf_select bpfselect #else int bpfselect(dev, rw) register dev_t dev; int rw; { return (bpf_select(dev, rw, u.u_procp)); } #endif /* * Support for select() system call * * Return true iff the specific operation will not block indefinitely. * Otherwise, return false but make a note that a selwakeup() must be done. */ int bpf_select(dev, rw, p) register dev_t dev; int rw; struct proc *p; { register struct bpf_d *d; register int s; if (rw != FREAD) return (0); /* * An imitation of the FIONREAD ioctl code. */ d = &bpf_dtab[minor(dev)]; s = splimp(); if (d->bd_hlen != 0 || (d->bd_immediate && d->bd_slen != 0)) { /* * There is data waiting. */ splx(s); return (1); } #if BSD >= 199103 selrecord(p, &d->bd_sel); #else /* * No data ready. If there's already a select() waiting on this * minor device then this is a collision. This shouldn't happen * because minors really should not be shared, but if a process * forks while one of these is open, it is possible that both * processes could select on the same descriptor. */ if (d->bd_selproc && d->bd_selproc->p_wchan == (caddr_t)&selwait) d->bd_selcoll = 1; else d->bd_selproc = p; #endif splx(s); return (0); } /* * Incoming linkage from device drivers. Process the packet pkt, of length * pktlen, which is stored in a contiguous buffer. The packet is parsed * by each process' filter, and if accepted, stashed into the corresponding * buffer. */ void bpf_tap(arg, pkt, pktlen) caddr_t arg; register u_char *pkt; register u_int pktlen; { struct bpf_if *bp; register struct bpf_d *d; register u_int slen; /* * Note that the ipl does not have to be raised at this point. * The only problem that could arise here is that if two different * interfaces shared any data. This is not the case. */ bp = (struct bpf_if *)arg; for (d = bp->bif_dlist; d != 0; d = d->bd_next) { ++d->bd_rcount; slen = bpf_filter(d->bd_filter, pkt, pktlen, pktlen); if (slen != 0) catchpacket(d, pkt, pktlen, slen, bcopy); } } /* * Copy data from an mbuf chain into a buffer. This code is derived * from m_copydata in sys/uipc_mbuf.c. */ static void bpf_mcopy(src_arg, dst_arg, len) const void *src_arg; void *dst_arg; register u_int len; { register const struct mbuf *m; register u_int count; u_char *dst; m = src_arg; dst = dst_arg; while (len > 0) { if (m == 0) panic("bpf_mcopy"); count = min(m->m_len, len); bcopy(mtod(m, caddr_t), (caddr_t)dst, count); m = m->m_next; dst += count; len -= count; } } /* * Incoming linkage from device drivers, when packet is in an mbuf chain. */ void bpf_mtap(arg, m) caddr_t arg; struct mbuf *m; { struct bpf_if *bp = (struct bpf_if *)arg; struct bpf_d *d; u_int pktlen, slen; struct mbuf *m0; pktlen = 0; for (m0 = m; m0 != 0; m0 = m0->m_next) pktlen += m0->m_len; for (d = bp->bif_dlist; d != 0; d = d->bd_next) { ++d->bd_rcount; slen = bpf_filter(d->bd_filter, (u_char *)m, pktlen, 0); if (slen != 0) catchpacket(d, (u_char *)m, pktlen, slen, bpf_mcopy); } } /* * Move the packet data from interface memory (pkt) into the * store buffer. Return 1 if it's time to wakeup a listener (buffer full), * otherwise 0. "copy" is the routine called to do the actual data * transfer. bcopy is passed in to copy contiguous chunks, while * bpf_mcopy is passed in to copy mbuf chains. In the latter case, * pkt is really an mbuf. */ static void catchpacket(d, pkt, pktlen, snaplen, cpfn) register struct bpf_d *d; register u_char *pkt; register u_int pktlen, snaplen; register void (*cpfn)(const void *, void *, u_int); { register struct bpf_hdr *hp; register int totlen, curlen; register int hdrlen = d->bd_bif->bif_hdrlen; /* * Figure out how many bytes to move. If the packet is * greater or equal to the snapshot length, transfer that * much. Otherwise, transfer the whole packet (unless * we hit the buffer size limit). */ totlen = hdrlen + min(snaplen, pktlen); if (totlen > d->bd_bufsize) totlen = d->bd_bufsize; /* * Round up the end of the previous packet to the next longword. */ curlen = BPF_WORDALIGN(d->bd_slen); if (curlen + totlen > d->bd_bufsize) { /* * This packet will overflow the storage buffer. * Rotate the buffers if we can, then wakeup any * pending reads. */ if (d->bd_fbuf == 0) { /* * We haven't completed the previous read yet, * so drop the packet. */ ++d->bd_dcount; return; } ROTATE_BUFFERS(d); bpf_wakeup(d); curlen = 0; } else if (d->bd_immediate) /* * Immediate mode is set. A packet arrived so any * reads should be woken up. */ bpf_wakeup(d); /* * Append the bpf header. */ hp = (struct bpf_hdr *)(d->bd_sbuf + curlen); #if BSD >= 199103 microtime(&hp->bh_tstamp); #elif defined(sun) uniqtime(&hp->bh_tstamp); #else hp->bh_tstamp = time; #endif hp->bh_datalen = pktlen; hp->bh_hdrlen = hdrlen; /* * Copy the packet data into the store buffer and update its length. */ (*cpfn)(pkt, (u_char *)hp + hdrlen, (hp->bh_caplen = totlen - hdrlen)); d->bd_slen = curlen + totlen; } /* * Initialize all nonzero fields of a descriptor. */ static int bpf_allocbufs(d) register struct bpf_d *d; { d->bd_fbuf = (caddr_t)malloc(d->bd_bufsize, M_DEVBUF, M_WAITOK); if (d->bd_fbuf == 0) return (ENOBUFS); d->bd_sbuf = (caddr_t)malloc(d->bd_bufsize, M_DEVBUF, M_WAITOK); if (d->bd_sbuf == 0) { free(d->bd_fbuf, M_DEVBUF); return (ENOBUFS); } d->bd_slen = 0; d->bd_hlen = 0; return (0); } /* * Free buffers currently in use by a descriptor. * Called on close. */ static void bpf_freed(d) register struct bpf_d *d; { /* * We don't need to lock out interrupts since this descriptor has * been detached from its interface and it yet hasn't been marked * free. */ if (d->bd_sbuf != 0) { free(d->bd_sbuf, M_DEVBUF); if (d->bd_hbuf != 0) free(d->bd_hbuf, M_DEVBUF); if (d->bd_fbuf != 0) free(d->bd_fbuf, M_DEVBUF); } if (d->bd_filter) free((caddr_t)d->bd_filter, M_DEVBUF); D_MARKFREE(d); } /* * Attach an interface to bpf. driverp is a pointer to a (struct bpf_if *) * in the driver's softc; dlt is the link layer type; hdrlen is the fixed * size of the link header (variable length headers not yet supported). */ void bpfattach(driverp, ifp, dlt, hdrlen) caddr_t *driverp; struct ifnet *ifp; u_int dlt, hdrlen; { struct bpf_if *bp; int i; #if BSD < 199103 static struct bpf_if bpf_ifs[NBPFILTER]; static int bpfifno; bp = (bpfifno < NBPFILTER) ? &bpf_ifs[bpfifno++] : 0; #else bp = (struct bpf_if *)malloc(sizeof(*bp), M_DEVBUF, M_DONTWAIT); #endif if (bp == 0) panic("bpfattach"); bp->bif_dlist = 0; bp->bif_driverp = (struct bpf_if **)driverp; bp->bif_ifp = ifp; bp->bif_dlt = dlt; bp->bif_next = bpf_iflist; bpf_iflist = bp; *bp->bif_driverp = 0; /* * Compute the length of the bpf header. This is not necessarily * equal to SIZEOF_BPF_HDR because we want to insert spacing such * that the network layer header begins on a longword boundary (for * performance reasons and to alleviate alignment restrictions). */ bp->bif_hdrlen = BPF_WORDALIGN(hdrlen + SIZEOF_BPF_HDR) - hdrlen; /* * Mark all the descriptors free if this hasn't been done. */ if (!D_ISFREE(&bpf_dtab[0])) for (i = 0; i < NBPFILTER; ++i) D_MARKFREE(&bpf_dtab[i]); printf("bpf: %s%d attached\n", ifp->if_name, ifp->if_unit); } #if BSD >= 199103 /* XXX This routine belongs in net/if.c. */ /* * Set/clear promiscuous mode on interface ifp based on the truth value * of pswitch. The calls are reference counted so that only the first * "on" request actually has an effect, as does the final "off" request. * Results are undefined if the "off" and "on" requests are not matched. */ int ifpromisc(ifp, pswitch) struct ifnet *ifp; int pswitch; { struct ifreq ifr; /* * If the device is not configured up, we cannot put it in * promiscuous mode. */ if ((ifp->if_flags & IFF_UP) == 0) return (ENETDOWN); if (pswitch) { if (ifp->if_pcount++ != 0) return (0); ifp->if_flags |= IFF_PROMISC; } else { if (--ifp->if_pcount > 0) return (0); ifp->if_flags &= ~IFF_PROMISC; } ifr.ifr_flags = ifp->if_flags; return ((*ifp->if_ioctl)(ifp, SIOCSIFFLAGS, (caddr_t)&ifr)); } #endif #if BSD < 199103 /* * Allocate some memory for bpf. This is temporary SunOS support, and * is admittedly a hack. * If resources unavaiable, return 0. */ static caddr_t bpf_alloc(size, canwait) register int size; register int canwait; { register struct mbuf *m; if ((unsigned)size > (MCLBYTES-8)) return 0; MGET(m, canwait, MT_DATA); if (m == 0) return 0; if ((unsigned)size > (MLEN-8)) { MCLGET(m); if (m->m_len != MCLBYTES) { m_freem(m); return 0; } } *mtod(m, struct mbuf **) = m; return mtod(m, caddr_t) + 8; } #endif #endif