1 /****************************************************************************** 2 * 3 * Name: actypes.h - Common data types for the entire ACPI subsystem 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2022, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #ifndef __ACTYPES_H__ 45 #define __ACTYPES_H__ 46 47 /* acpisrc:StructDefs -- for acpisrc conversion */ 48 49 /* 50 * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent 51 * header and must be either 32 or 64. 16-bit ACPICA is no longer 52 * supported, as of 12/2006. 53 */ 54 #ifndef ACPI_MACHINE_WIDTH 55 #error ACPI_MACHINE_WIDTH not defined 56 #endif 57 58 /* 59 * Data type ranges 60 * Note: These macros are designed to be compiler independent as well as 61 * working around problems that some 32-bit compilers have with 64-bit 62 * constants. 63 */ 64 #define ACPI_UINT8_MAX (UINT8) (~((UINT8) 0)) /* 0xFF */ 65 #define ACPI_UINT16_MAX (UINT16)(~((UINT16) 0)) /* 0xFFFF */ 66 #define ACPI_UINT32_MAX (UINT32)(~((UINT32) 0)) /* 0xFFFFFFFF */ 67 #define ACPI_UINT64_MAX (UINT64)(~((UINT64) 0)) /* 0xFFFFFFFFFFFFFFFF */ 68 #define ACPI_ASCII_MAX 0x7F 69 70 71 /* 72 * Architecture-specific ACPICA Subsystem Data Types 73 * 74 * The goal of these types is to provide source code portability across 75 * 16-bit, 32-bit, and 64-bit targets. 76 * 77 * 1) The following types are of fixed size for all targets (16/32/64): 78 * 79 * BOOLEAN Logical boolean 80 * 81 * UINT8 8-bit (1 byte) unsigned value 82 * UINT16 16-bit (2 byte) unsigned value 83 * UINT32 32-bit (4 byte) unsigned value 84 * UINT64 64-bit (8 byte) unsigned value 85 * 86 * INT16 16-bit (2 byte) signed value 87 * INT32 32-bit (4 byte) signed value 88 * INT64 64-bit (8 byte) signed value 89 * 90 * COMPILER_DEPENDENT_UINT64/INT64 - These types are defined in the 91 * compiler-dependent header(s) and were introduced because there is no 92 * common 64-bit integer type across the various compilation models, as 93 * shown in the table below. 94 * 95 * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit 96 * char 8 8 8 8 8 8 97 * short 16 16 16 16 16 16 98 * _int32 32 99 * int 32 64 32 32 16 16 100 * long 64 64 32 32 32 32 101 * long long 64 64 102 * pointer 64 64 64 32 32 32 103 * 104 * Note: ILP64 and LP32 are currently not supported. 105 * 106 * 107 * 2) These types represent the native word size of the target mode of the 108 * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are 109 * usually used for memory allocation, efficient loop counters, and array 110 * indexes. The types are similar to the size_t type in the C library and 111 * are required because there is no C type that consistently represents the 112 * native data width. ACPI_SIZE is needed because there is no guarantee 113 * that a kernel-level C library is present. 114 * 115 * ACPI_SIZE 16/32/64-bit unsigned value 116 * ACPI_NATIVE_INT 16/32/64-bit signed value 117 */ 118 119 /******************************************************************************* 120 * 121 * Common types for all compilers, all targets 122 * 123 ******************************************************************************/ 124 125 #ifndef ACPI_USE_SYSTEM_INTTYPES 126 127 typedef unsigned char BOOLEAN; 128 typedef unsigned char UINT8; 129 typedef unsigned short UINT16; 130 typedef short INT16; 131 typedef COMPILER_DEPENDENT_UINT64 UINT64; 132 typedef COMPILER_DEPENDENT_INT64 INT64; 133 134 #endif /* ACPI_USE_SYSTEM_INTTYPES */ 135 136 /* 137 * Value returned by AcpiOsGetThreadId. There is no standard "thread_id" 138 * across operating systems or even the various UNIX systems. Since ACPICA 139 * only needs the thread ID as a unique thread identifier, we use a UINT64 140 * as the only common data type - it will accommodate any type of pointer or 141 * any type of integer. It is up to the host-dependent OSL to cast the 142 * native thread ID type to a UINT64 (in AcpiOsGetThreadId). 143 */ 144 #define ACPI_THREAD_ID UINT64 145 146 147 /******************************************************************************* 148 * 149 * Types specific to 64-bit targets 150 * 151 ******************************************************************************/ 152 153 #if ACPI_MACHINE_WIDTH == 64 154 155 #ifndef ACPI_USE_SYSTEM_INTTYPES 156 157 typedef unsigned int UINT32; 158 typedef int INT32; 159 160 #endif /* ACPI_USE_SYSTEM_INTTYPES */ 161 162 163 typedef INT64 ACPI_NATIVE_INT; 164 typedef UINT64 ACPI_SIZE; 165 typedef UINT64 ACPI_IO_ADDRESS; 166 typedef UINT64 ACPI_PHYSICAL_ADDRESS; 167 168 #define ACPI_MAX_PTR ACPI_UINT64_MAX 169 #define ACPI_SIZE_MAX ACPI_UINT64_MAX 170 #define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */ 171 #define ACPI_USE_NATIVE_MATH64 /* Has native 64-bit integer support */ 172 173 /* 174 * In the case of the Itanium Processor Family (IPF), the hardware does not 175 * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED 176 * flag to indicate that special precautions must be taken to avoid alignment 177 * faults. (IA64 or ia64 is currently used by existing compilers to indicate 178 * IPF.) 179 * 180 * Note: EM64T and other X86-64 processors support misaligned transfers, 181 * so there is no need to define this flag. 182 */ 183 #if defined (__IA64__) || defined (__ia64__) 184 #define ACPI_MISALIGNMENT_NOT_SUPPORTED 185 #endif 186 187 188 /******************************************************************************* 189 * 190 * Types specific to 32-bit targets 191 * 192 ******************************************************************************/ 193 194 #elif ACPI_MACHINE_WIDTH == 32 195 196 #ifndef ACPI_USE_SYSTEM_INTTYPES 197 198 typedef unsigned int UINT32; 199 typedef int INT32; 200 201 #endif /* ACPI_USE_SYSTEM_INTTYPES */ 202 203 204 typedef INT32 ACPI_NATIVE_INT; 205 typedef UINT32 ACPI_SIZE; 206 207 #ifdef ACPI_32BIT_PHYSICAL_ADDRESS 208 209 /* 210 * OSPMs can define this to shrink the size of the structures for 32-bit 211 * none PAE environment. ASL compiler may always define this to generate 212 * 32-bit OSPM compliant tables. 213 */ 214 typedef UINT32 ACPI_IO_ADDRESS; 215 typedef UINT32 ACPI_PHYSICAL_ADDRESS; 216 217 #else /* ACPI_32BIT_PHYSICAL_ADDRESS */ 218 219 /* 220 * It is reported that, after some calculations, the physical addresses can 221 * wrap over the 32-bit boundary on 32-bit PAE environment. 222 * https://bugzilla.kernel.org/show_bug.cgi?id=87971 223 */ 224 typedef UINT64 ACPI_IO_ADDRESS; 225 typedef UINT64 ACPI_PHYSICAL_ADDRESS; 226 227 #endif /* ACPI_32BIT_PHYSICAL_ADDRESS */ 228 229 #define ACPI_MAX_PTR ACPI_UINT32_MAX 230 #define ACPI_SIZE_MAX ACPI_UINT32_MAX 231 232 #else 233 234 /* ACPI_MACHINE_WIDTH must be either 64 or 32 */ 235 236 #error unknown ACPI_MACHINE_WIDTH 237 #endif 238 239 240 /******************************************************************************* 241 * 242 * OS-dependent types 243 * 244 * If the defaults below are not appropriate for the host system, they can 245 * be defined in the OS-specific header, and this will take precedence. 246 * 247 ******************************************************************************/ 248 249 /* Flags for AcpiOsAcquireLock/AcpiOsReleaseLock */ 250 251 #ifndef ACPI_CPU_FLAGS 252 #define ACPI_CPU_FLAGS ACPI_SIZE 253 #endif 254 255 /* Object returned from AcpiOsCreateCache */ 256 257 #ifndef ACPI_CACHE_T 258 #ifdef ACPI_USE_LOCAL_CACHE 259 #define ACPI_CACHE_T ACPI_MEMORY_LIST 260 #else 261 #define ACPI_CACHE_T void * 262 #endif 263 #endif 264 265 /* 266 * Synchronization objects - Mutexes, Semaphores, and SpinLocks 267 */ 268 #if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE) 269 /* 270 * These macros are used if the host OS does not support a mutex object. 271 * Map the OSL Mutex interfaces to binary semaphores. 272 */ 273 #define ACPI_MUTEX ACPI_SEMAPHORE 274 #define AcpiOsCreateMutex(OutHandle) AcpiOsCreateSemaphore (1, 1, OutHandle) 275 #define AcpiOsDeleteMutex(Handle) (void) AcpiOsDeleteSemaphore (Handle) 276 #define AcpiOsAcquireMutex(Handle,Time) AcpiOsWaitSemaphore (Handle, 1, Time) 277 #define AcpiOsReleaseMutex(Handle) (void) AcpiOsSignalSemaphore (Handle, 1) 278 #endif 279 280 /* Configurable types for synchronization objects */ 281 282 #ifndef ACPI_SPINLOCK 283 #define ACPI_SPINLOCK void * 284 #endif 285 286 #ifndef ACPI_SEMAPHORE 287 #define ACPI_SEMAPHORE void * 288 #endif 289 290 #ifndef ACPI_MUTEX 291 #define ACPI_MUTEX void * 292 #endif 293 294 295 /******************************************************************************* 296 * 297 * Compiler-dependent types 298 * 299 * If the defaults below are not appropriate for the host compiler, they can 300 * be defined in the compiler-specific header, and this will take precedence. 301 * 302 ******************************************************************************/ 303 304 /* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */ 305 306 #ifndef ACPI_UINTPTR_T 307 #define ACPI_UINTPTR_T void * 308 #endif 309 310 /* 311 * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because 312 * some compilers can catch printf format string problems 313 */ 314 #ifndef ACPI_PRINTF_LIKE 315 #define ACPI_PRINTF_LIKE(c) 316 #endif 317 318 /* 319 * Some compilers complain about unused variables. Sometimes we don't want 320 * to use all the variables (for example, _AcpiModuleName). This allows us 321 * to tell the compiler in a per-variable manner that a variable 322 * is unused 323 */ 324 #ifndef ACPI_UNUSED_VAR 325 #define ACPI_UNUSED_VAR 326 #endif 327 328 /* 329 * All ACPICA external functions that are available to the rest of the 330 * kernel are tagged with these macros which can be defined as appropriate 331 * for the host. 332 * 333 * Notes: 334 * ACPI_EXPORT_SYMBOL_INIT is used for initialization and termination 335 * interfaces that may need special processing. 336 * ACPI_EXPORT_SYMBOL is used for all other public external functions. 337 */ 338 #ifndef ACPI_EXPORT_SYMBOL_INIT 339 #define ACPI_EXPORT_SYMBOL_INIT(Symbol) 340 #endif 341 342 #ifndef ACPI_EXPORT_SYMBOL 343 #define ACPI_EXPORT_SYMBOL(Symbol) 344 #endif 345 346 /* 347 * Compiler/Clibrary-dependent debug initialization. Used for ACPICA 348 * utilities only. 349 */ 350 #ifndef ACPI_DEBUG_INITIALIZE 351 #define ACPI_DEBUG_INITIALIZE() 352 #endif 353 354 355 /******************************************************************************* 356 * 357 * Configuration 358 * 359 ******************************************************************************/ 360 361 #ifdef ACPI_NO_MEM_ALLOCATIONS 362 363 #define ACPI_ALLOCATE(a) NULL 364 #define ACPI_ALLOCATE_ZEROED(a) NULL 365 #define ACPI_FREE(a) 366 #define ACPI_MEM_TRACKING(a) 367 368 #else /* ACPI_NO_MEM_ALLOCATIONS */ 369 370 #ifdef ACPI_DBG_TRACK_ALLOCATIONS 371 /* 372 * Memory allocation tracking (used by AcpiExec to detect memory leaks) 373 */ 374 #define ACPI_MEM_PARAMETERS _COMPONENT, _AcpiModuleName, __LINE__ 375 #define ACPI_ALLOCATE(a) AcpiUtAllocateAndTrack ((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS) 376 #define ACPI_ALLOCATE_ZEROED(a) AcpiUtAllocateZeroedAndTrack ((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS) 377 #define ACPI_FREE(a) AcpiUtFreeAndTrack (a, ACPI_MEM_PARAMETERS) 378 #define ACPI_MEM_TRACKING(a) a 379 380 #else 381 /* 382 * Normal memory allocation directly via the OS services layer 383 */ 384 #define ACPI_ALLOCATE(a) AcpiOsAllocate ((ACPI_SIZE) (a)) 385 #define ACPI_ALLOCATE_ZEROED(a) AcpiOsAllocateZeroed ((ACPI_SIZE) (a)) 386 #define ACPI_FREE(a) AcpiOsFree (a) 387 #define ACPI_MEM_TRACKING(a) 388 389 #endif /* ACPI_DBG_TRACK_ALLOCATIONS */ 390 391 #endif /* ACPI_NO_MEM_ALLOCATIONS */ 392 393 394 /****************************************************************************** 395 * 396 * ACPI Specification constants (Do not change unless the specification 397 * changes) 398 * 399 *****************************************************************************/ 400 401 /* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */ 402 403 #define ACPI_MAX_GPE_BLOCKS 2 404 405 /* Default ACPI register widths */ 406 407 #define ACPI_GPE_REGISTER_WIDTH 8 408 #define ACPI_PM1_REGISTER_WIDTH 16 409 #define ACPI_PM2_REGISTER_WIDTH 8 410 #define ACPI_PM_TIMER_WIDTH 32 411 #define ACPI_RESET_REGISTER_WIDTH 8 412 413 /* Names within the namespace are 4 bytes long */ 414 415 #define ACPI_NAMESEG_SIZE 4 /* Fixed by ACPI spec */ 416 #define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ 417 #define ACPI_PATH_SEPARATOR '.' 418 419 /* Sizes for ACPI table headers */ 420 421 #define ACPI_OEM_ID_SIZE 6 422 #define ACPI_OEM_TABLE_ID_SIZE 8 423 424 /* ACPI/PNP hardware IDs */ 425 426 #define PCI_ROOT_HID_STRING "PNP0A03" 427 #define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08" 428 429 /* PM Timer ticks per second (HZ) */ 430 431 #define ACPI_PM_TIMER_FREQUENCY 3579545 432 433 434 /******************************************************************************* 435 * 436 * Independent types 437 * 438 ******************************************************************************/ 439 440 /* Logical defines and NULL */ 441 442 #ifdef FALSE 443 #undef FALSE 444 #endif 445 #define FALSE (1 == 0) 446 447 #ifdef TRUE 448 #undef TRUE 449 #endif 450 #define TRUE (1 == 1) 451 452 #ifndef NULL 453 #define NULL (void *) 0 454 #endif 455 456 457 /* 458 * Miscellaneous types 459 */ 460 typedef UINT32 ACPI_STATUS; /* All ACPI Exceptions */ 461 typedef UINT32 ACPI_NAME; /* 4-byte ACPI name */ 462 typedef char * ACPI_STRING; /* Null terminated ASCII string */ 463 typedef void * ACPI_HANDLE; /* Actually a ptr to a NS Node */ 464 465 466 /* Time constants for timer calculations */ 467 468 #define ACPI_MSEC_PER_SEC 1000L 469 470 #define ACPI_USEC_PER_MSEC 1000L 471 #define ACPI_USEC_PER_SEC 1000000L 472 473 #define ACPI_100NSEC_PER_USEC 10L 474 #define ACPI_100NSEC_PER_MSEC 10000L 475 #define ACPI_100NSEC_PER_SEC 10000000L 476 477 #define ACPI_NSEC_PER_USEC 1000L 478 #define ACPI_NSEC_PER_MSEC 1000000L 479 #define ACPI_NSEC_PER_SEC 1000000000L 480 481 #define ACPI_TIME_AFTER(a, b) ((INT64)((b) - (a)) < 0) 482 483 484 /* Owner IDs are used to track namespace nodes for selective deletion */ 485 486 typedef UINT16 ACPI_OWNER_ID; 487 #define ACPI_OWNER_ID_MAX 0xFFF /* 4095 possible owner IDs */ 488 489 490 #define ACPI_INTEGER_BIT_SIZE 64 491 #define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */ 492 #define ACPI_MAX64_DECIMAL_DIGITS 20 493 #define ACPI_MAX32_DECIMAL_DIGITS 10 494 #define ACPI_MAX16_DECIMAL_DIGITS 5 495 #define ACPI_MAX8_DECIMAL_DIGITS 3 496 497 /* 498 * Constants with special meanings 499 */ 500 #define ACPI_ROOT_OBJECT ((ACPI_HANDLE) ACPI_TO_POINTER (ACPI_MAX_PTR)) 501 #define ACPI_WAIT_FOREVER 0xFFFF /* UINT16, as per ACPI spec */ 502 #define ACPI_DO_NOT_WAIT 0 503 504 /* 505 * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are 506 * 32 bits. In ACPI version 2 (2000) and later, integers are max 64 bits. 507 * Note that this pertains to the ACPI integer type only, not to other 508 * integers used in the implementation of the ACPICA subsystem. 509 * 510 * 01/2010: This type is obsolete and has been removed from the entire ACPICA 511 * code base. It remains here for compatibility with device drivers that use 512 * the type. However, it will be removed in the future. 513 */ 514 typedef UINT64 ACPI_INTEGER; 515 #define ACPI_INTEGER_MAX ACPI_UINT64_MAX 516 517 518 /******************************************************************************* 519 * 520 * Commonly used macros 521 * 522 ******************************************************************************/ 523 524 /* Data manipulation */ 525 526 #define ACPI_LOBYTE(Integer) ((UINT8) (UINT16)(Integer)) 527 #define ACPI_HIBYTE(Integer) ((UINT8) (((UINT16)(Integer)) >> 8)) 528 #define ACPI_LOWORD(Integer) ((UINT16) (UINT32)(Integer)) 529 #define ACPI_HIWORD(Integer) ((UINT16)(((UINT32)(Integer)) >> 16)) 530 #define ACPI_LODWORD(Integer64) ((UINT32) (UINT64)(Integer64)) 531 #define ACPI_HIDWORD(Integer64) ((UINT32)(((UINT64)(Integer64)) >> 32)) 532 533 #define ACPI_SET_BIT(target,bit) ((target) |= (bit)) 534 #define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit)) 535 #define ACPI_MIN(a,b) (((a)<(b))?(a):(b)) 536 #define ACPI_MAX(a,b) (((a)>(b))?(a):(b)) 537 538 /* Size calculation */ 539 540 #define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0])) 541 542 /* Pointer manipulation */ 543 544 #define ACPI_CAST_PTR(t, p) ((t *) (ACPI_UINTPTR_T) (p)) 545 #define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (ACPI_UINTPTR_T) (p)) 546 #define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (UINT8, (a)) + (ACPI_SIZE)(b))) 547 #define ACPI_SUB_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (UINT8, (a)) - (ACPI_SIZE)(b))) 548 #define ACPI_PTR_DIFF(a, b) ((ACPI_SIZE) (ACPI_CAST_PTR (UINT8, (a)) - ACPI_CAST_PTR (UINT8, (b)))) 549 550 /* Pointer/Integer type conversions */ 551 552 #define ACPI_TO_POINTER(i) ACPI_CAST_PTR (void, (ACPI_SIZE) (i)) 553 #ifndef ACPI_TO_INTEGER 554 #define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) 0) 555 #endif 556 #ifndef ACPI_OFFSET 557 #define ACPI_OFFSET(d, f) ACPI_PTR_DIFF (&(((d *) 0)->f), (void *) 0) 558 #endif 559 #define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i) 560 561 /* Optimizations for 4-character (32-bit) ACPI_NAME manipulation */ 562 563 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED 564 #define ACPI_COMPARE_NAMESEG(a,b) (*ACPI_CAST_PTR (UINT32, (a)) == *ACPI_CAST_PTR (UINT32, (b))) 565 #define ACPI_COPY_NAMESEG(dest,src) (*ACPI_CAST_PTR (UINT32, (dest)) = *ACPI_CAST_PTR (UINT32, (src))) 566 #else 567 #define ACPI_COMPARE_NAMESEG(a,b) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAMESEG_SIZE)) 568 #define ACPI_COPY_NAMESEG(dest,src) (strncpy (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAMESEG_SIZE)) 569 #endif 570 571 /* Support for the special RSDP signature (8 characters) */ 572 573 #define ACPI_VALIDATE_RSDP_SIG(a) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_SIG_RSDP, 8)) 574 #define ACPI_MAKE_RSDP_SIG(dest) (memcpy (ACPI_CAST_PTR (char, (dest)), ACPI_SIG_RSDP, 8)) 575 576 /* Support for OEMx signature (x can be any character) */ 577 #define ACPI_IS_OEM_SIG(a) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_OEM_NAME, 3) &&\ 578 strnlen (a, ACPI_NAMESEG_SIZE) == ACPI_NAMESEG_SIZE) 579 580 /* 581 * Algorithm to obtain access bit or byte width. 582 * Can be used with AccessSize field of ACPI_GENERIC_ADDRESS and 583 * ACPI_RESOURCE_GENERIC_REGISTER. 584 */ 585 #define ACPI_ACCESS_BIT_SHIFT 2 586 #define ACPI_ACCESS_BYTE_SHIFT -1 587 #define ACPI_ACCESS_BIT_MAX (31 - ACPI_ACCESS_BIT_SHIFT) 588 #define ACPI_ACCESS_BYTE_MAX (31 - ACPI_ACCESS_BYTE_SHIFT) 589 #define ACPI_ACCESS_BIT_DEFAULT (8 - ACPI_ACCESS_BIT_SHIFT) 590 #define ACPI_ACCESS_BYTE_DEFAULT (8 - ACPI_ACCESS_BYTE_SHIFT) 591 #define ACPI_ACCESS_BIT_WIDTH(size) (1 << ((size) + ACPI_ACCESS_BIT_SHIFT)) 592 #define ACPI_ACCESS_BYTE_WIDTH(size) (1 << ((size) + ACPI_ACCESS_BYTE_SHIFT)) 593 594 /******************************************************************************* 595 * 596 * Miscellaneous constants 597 * 598 ******************************************************************************/ 599 600 /* 601 * Initialization sequence options 602 */ 603 #define ACPI_FULL_INITIALIZATION 0x0000 604 #define ACPI_NO_FACS_INIT 0x0001 605 #define ACPI_NO_ACPI_ENABLE 0x0002 606 #define ACPI_NO_HARDWARE_INIT 0x0004 607 #define ACPI_NO_EVENT_INIT 0x0008 608 #define ACPI_NO_HANDLER_INIT 0x0010 609 #define ACPI_NO_OBJECT_INIT 0x0020 610 #define ACPI_NO_DEVICE_INIT 0x0040 611 #define ACPI_NO_ADDRESS_SPACE_INIT 0x0080 612 613 /* 614 * Initialization state 615 */ 616 #define ACPI_SUBSYSTEM_INITIALIZE 0x01 617 #define ACPI_INITIALIZED_OK 0x02 618 619 /* 620 * Power state values 621 */ 622 #define ACPI_STATE_UNKNOWN (UINT8) 0xFF 623 624 #define ACPI_STATE_S0 (UINT8) 0 625 #define ACPI_STATE_S1 (UINT8) 1 626 #define ACPI_STATE_S2 (UINT8) 2 627 #define ACPI_STATE_S3 (UINT8) 3 628 #define ACPI_STATE_S4 (UINT8) 4 629 #define ACPI_STATE_S5 (UINT8) 5 630 #define ACPI_S_STATES_MAX ACPI_STATE_S5 631 #define ACPI_S_STATE_COUNT 6 632 633 #define ACPI_STATE_D0 (UINT8) 0 634 #define ACPI_STATE_D1 (UINT8) 1 635 #define ACPI_STATE_D2 (UINT8) 2 636 #define ACPI_STATE_D3 (UINT8) 3 637 #define ACPI_D_STATES_MAX ACPI_STATE_D3 638 #define ACPI_D_STATE_COUNT 4 639 640 #define ACPI_STATE_C0 (UINT8) 0 641 #define ACPI_STATE_C1 (UINT8) 1 642 #define ACPI_STATE_C2 (UINT8) 2 643 #define ACPI_STATE_C3 (UINT8) 3 644 #define ACPI_C_STATES_MAX ACPI_STATE_C3 645 #define ACPI_C_STATE_COUNT 4 646 647 /* 648 * Sleep type invalid value 649 */ 650 #define ACPI_SLEEP_TYPE_MAX 0x7 651 #define ACPI_SLEEP_TYPE_INVALID 0xFF 652 653 /* 654 * Standard notify values 655 */ 656 #define ACPI_NOTIFY_BUS_CHECK (UINT8) 0x00 657 #define ACPI_NOTIFY_DEVICE_CHECK (UINT8) 0x01 658 #define ACPI_NOTIFY_DEVICE_WAKE (UINT8) 0x02 659 #define ACPI_NOTIFY_EJECT_REQUEST (UINT8) 0x03 660 #define ACPI_NOTIFY_DEVICE_CHECK_LIGHT (UINT8) 0x04 661 #define ACPI_NOTIFY_FREQUENCY_MISMATCH (UINT8) 0x05 662 #define ACPI_NOTIFY_BUS_MODE_MISMATCH (UINT8) 0x06 663 #define ACPI_NOTIFY_POWER_FAULT (UINT8) 0x07 664 #define ACPI_NOTIFY_CAPABILITIES_CHECK (UINT8) 0x08 665 #define ACPI_NOTIFY_DEVICE_PLD_CHECK (UINT8) 0x09 666 #define ACPI_NOTIFY_RESERVED (UINT8) 0x0A 667 #define ACPI_NOTIFY_LOCALITY_UPDATE (UINT8) 0x0B 668 #define ACPI_NOTIFY_SHUTDOWN_REQUEST (UINT8) 0x0C 669 #define ACPI_NOTIFY_AFFINITY_UPDATE (UINT8) 0x0D 670 #define ACPI_NOTIFY_MEMORY_UPDATE (UINT8) 0x0E 671 #define ACPI_NOTIFY_DISCONNECT_RECOVER (UINT8) 0x0F 672 673 #define ACPI_GENERIC_NOTIFY_MAX 0x0F 674 #define ACPI_SPECIFIC_NOTIFY_MAX 0x84 675 676 /* 677 * Types associated with ACPI names and objects. The first group of 678 * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition 679 * of the ACPI ObjectType() operator (See the ACPI Spec). Therefore, 680 * only add to the first group if the spec changes. 681 * 682 * NOTE: Types must be kept in sync with the global AcpiNsProperties 683 * and AcpiNsTypeNames arrays. 684 */ 685 typedef UINT32 ACPI_OBJECT_TYPE; 686 687 #define ACPI_TYPE_ANY 0x00 688 #define ACPI_TYPE_INTEGER 0x01 /* Byte/Word/Dword/Zero/One/Ones */ 689 #define ACPI_TYPE_STRING 0x02 690 #define ACPI_TYPE_BUFFER 0x03 691 #define ACPI_TYPE_PACKAGE 0x04 /* ByteConst, multiple DataTerm/Constant/SuperName */ 692 #define ACPI_TYPE_FIELD_UNIT 0x05 693 #define ACPI_TYPE_DEVICE 0x06 /* Name, multiple Node */ 694 #define ACPI_TYPE_EVENT 0x07 695 #define ACPI_TYPE_METHOD 0x08 /* Name, ByteConst, multiple Code */ 696 #define ACPI_TYPE_MUTEX 0x09 697 #define ACPI_TYPE_REGION 0x0A 698 #define ACPI_TYPE_POWER 0x0B /* Name,ByteConst,WordConst,multi Node */ 699 #define ACPI_TYPE_PROCESSOR 0x0C /* Name,ByteConst,DWordConst,ByteConst,multi NmO */ 700 #define ACPI_TYPE_THERMAL 0x0D /* Name, multiple Node */ 701 #define ACPI_TYPE_BUFFER_FIELD 0x0E 702 #define ACPI_TYPE_DDB_HANDLE 0x0F 703 #define ACPI_TYPE_DEBUG_OBJECT 0x10 704 705 #define ACPI_TYPE_EXTERNAL_MAX 0x10 706 #define ACPI_NUM_TYPES (ACPI_TYPE_EXTERNAL_MAX + 1) 707 708 /* 709 * These are object types that do not map directly to the ACPI 710 * ObjectType() operator. They are used for various internal purposes 711 * only. If new predefined ACPI_TYPEs are added (via the ACPI 712 * specification), these internal types must move upwards. (There 713 * is code that depends on these values being contiguous with the 714 * external types above.) 715 */ 716 #define ACPI_TYPE_LOCAL_REGION_FIELD 0x11 717 #define ACPI_TYPE_LOCAL_BANK_FIELD 0x12 718 #define ACPI_TYPE_LOCAL_INDEX_FIELD 0x13 719 #define ACPI_TYPE_LOCAL_REFERENCE 0x14 /* Arg#, Local#, Name, Debug, RefOf, Index */ 720 #define ACPI_TYPE_LOCAL_ALIAS 0x15 721 #define ACPI_TYPE_LOCAL_METHOD_ALIAS 0x16 722 #define ACPI_TYPE_LOCAL_NOTIFY 0x17 723 #define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18 724 #define ACPI_TYPE_LOCAL_RESOURCE 0x19 725 #define ACPI_TYPE_LOCAL_RESOURCE_FIELD 0x1A 726 #define ACPI_TYPE_LOCAL_SCOPE 0x1B /* 1 Name, multiple ObjectList Nodes */ 727 728 #define ACPI_TYPE_NS_NODE_MAX 0x1B /* Last typecode used within a NS Node */ 729 #define ACPI_TOTAL_TYPES (ACPI_TYPE_NS_NODE_MAX + 1) 730 731 /* 732 * These are special object types that never appear in 733 * a Namespace node, only in an object of ACPI_OPERAND_OBJECT 734 */ 735 #define ACPI_TYPE_LOCAL_EXTRA 0x1C 736 #define ACPI_TYPE_LOCAL_DATA 0x1D 737 738 #define ACPI_TYPE_LOCAL_MAX 0x1D 739 740 /* All types above here are invalid */ 741 742 #define ACPI_TYPE_INVALID 0x1E 743 #define ACPI_TYPE_NOT_FOUND 0xFF 744 745 #define ACPI_NUM_NS_TYPES (ACPI_TYPE_INVALID + 1) 746 747 748 /* 749 * All I/O 750 */ 751 #define ACPI_READ 0 752 #define ACPI_WRITE 1 753 #define ACPI_IO_MASK 1 754 755 /* 756 * Event Types: Fixed & General Purpose 757 */ 758 typedef UINT32 ACPI_EVENT_TYPE; 759 760 /* 761 * Fixed events 762 */ 763 #define ACPI_EVENT_PMTIMER 0 764 #define ACPI_EVENT_GLOBAL 1 765 #define ACPI_EVENT_POWER_BUTTON 2 766 #define ACPI_EVENT_SLEEP_BUTTON 3 767 #define ACPI_EVENT_RTC 4 768 #define ACPI_EVENT_PCIE_WAKE 5 769 #define ACPI_EVENT_MAX 5 770 #define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1 771 772 /* 773 * Event Status - Per event 774 * ------------- 775 * The encoding of ACPI_EVENT_STATUS is illustrated below. 776 * Note that a set bit (1) indicates the property is TRUE 777 * (e.g. if bit 0 is set then the event is enabled). 778 * +-------------+-+-+-+-+-+-+ 779 * | Bits 31:6 |5|4|3|2|1|0| 780 * +-------------+-+-+-+-+-+-+ 781 * | | | | | | | 782 * | | | | | | +- Enabled? 783 * | | | | | +--- Enabled for wake? 784 * | | | | +----- Status bit set? 785 * | | | +------- Enable bit set? 786 * | | +--------- Has a handler? 787 * | +----------- Masked? 788 * +----------------- <Reserved> 789 */ 790 typedef UINT32 ACPI_EVENT_STATUS; 791 792 #define ACPI_EVENT_FLAG_DISABLED (ACPI_EVENT_STATUS) 0x00 793 #define ACPI_EVENT_FLAG_ENABLED (ACPI_EVENT_STATUS) 0x01 794 #define ACPI_EVENT_FLAG_WAKE_ENABLED (ACPI_EVENT_STATUS) 0x02 795 #define ACPI_EVENT_FLAG_STATUS_SET (ACPI_EVENT_STATUS) 0x04 796 #define ACPI_EVENT_FLAG_ENABLE_SET (ACPI_EVENT_STATUS) 0x08 797 #define ACPI_EVENT_FLAG_HAS_HANDLER (ACPI_EVENT_STATUS) 0x10 798 #define ACPI_EVENT_FLAG_MASKED (ACPI_EVENT_STATUS) 0x20 799 #define ACPI_EVENT_FLAG_SET ACPI_EVENT_FLAG_STATUS_SET 800 801 /* Actions for AcpiSetGpe, AcpiGpeWakeup, AcpiHwLowSetGpe */ 802 803 #define ACPI_GPE_ENABLE 0 804 #define ACPI_GPE_DISABLE 1 805 #define ACPI_GPE_CONDITIONAL_ENABLE 2 806 807 /* 808 * GPE info flags - Per GPE 809 * +---+-+-+-+---+ 810 * |7:6|5|4|3|2:0| 811 * +---+-+-+-+---+ 812 * | | | | | 813 * | | | | +-- Type of dispatch:to method, handler, notify, or none 814 * | | | +----- Interrupt type: edge or level triggered 815 * | | +------- Is a Wake GPE 816 * | +--------- Has been enabled automatically at init time 817 * +------------ <Reserved> 818 */ 819 #define ACPI_GPE_DISPATCH_NONE (UINT8) 0x00 820 #define ACPI_GPE_DISPATCH_METHOD (UINT8) 0x01 821 #define ACPI_GPE_DISPATCH_HANDLER (UINT8) 0x02 822 #define ACPI_GPE_DISPATCH_NOTIFY (UINT8) 0x03 823 #define ACPI_GPE_DISPATCH_RAW_HANDLER (UINT8) 0x04 824 #define ACPI_GPE_DISPATCH_MASK (UINT8) 0x07 825 #define ACPI_GPE_DISPATCH_TYPE(flags) ((UINT8) ((flags) & ACPI_GPE_DISPATCH_MASK)) 826 827 #define ACPI_GPE_LEVEL_TRIGGERED (UINT8) 0x08 828 #define ACPI_GPE_EDGE_TRIGGERED (UINT8) 0x00 829 #define ACPI_GPE_XRUPT_TYPE_MASK (UINT8) 0x08 830 831 #define ACPI_GPE_CAN_WAKE (UINT8) 0x10 832 #define ACPI_GPE_AUTO_ENABLED (UINT8) 0x20 833 #define ACPI_GPE_INITIALIZED (UINT8) 0x40 834 835 /* 836 * Flags for GPE and Lock interfaces 837 */ 838 #define ACPI_NOT_ISR 0x1 839 #define ACPI_ISR 0x0 840 841 842 /* Notify types */ 843 844 #define ACPI_SYSTEM_NOTIFY 0x1 845 #define ACPI_DEVICE_NOTIFY 0x2 846 #define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY) 847 #define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3 848 #define ACPI_NUM_NOTIFY_TYPES 2 849 850 #define ACPI_MAX_SYS_NOTIFY 0x7F 851 #define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF 852 853 #define ACPI_SYSTEM_HANDLER_LIST 0 /* Used as index, must be SYSTEM_NOTIFY -1 */ 854 #define ACPI_DEVICE_HANDLER_LIST 1 /* Used as index, must be DEVICE_NOTIFY -1 */ 855 856 857 /* Address Space (Operation Region) Types */ 858 859 typedef UINT8 ACPI_ADR_SPACE_TYPE; 860 861 #define ACPI_ADR_SPACE_SYSTEM_MEMORY (ACPI_ADR_SPACE_TYPE) 0 862 #define ACPI_ADR_SPACE_SYSTEM_IO (ACPI_ADR_SPACE_TYPE) 1 863 #define ACPI_ADR_SPACE_PCI_CONFIG (ACPI_ADR_SPACE_TYPE) 2 864 #define ACPI_ADR_SPACE_EC (ACPI_ADR_SPACE_TYPE) 3 865 #define ACPI_ADR_SPACE_SMBUS (ACPI_ADR_SPACE_TYPE) 4 866 #define ACPI_ADR_SPACE_CMOS (ACPI_ADR_SPACE_TYPE) 5 867 #define ACPI_ADR_SPACE_PCI_BAR_TARGET (ACPI_ADR_SPACE_TYPE) 6 868 #define ACPI_ADR_SPACE_IPMI (ACPI_ADR_SPACE_TYPE) 7 869 #define ACPI_ADR_SPACE_GPIO (ACPI_ADR_SPACE_TYPE) 8 870 #define ACPI_ADR_SPACE_GSBUS (ACPI_ADR_SPACE_TYPE) 9 871 #define ACPI_ADR_SPACE_PLATFORM_COMM (ACPI_ADR_SPACE_TYPE) 10 872 #define ACPI_ADR_SPACE_PLATFORM_RT (ACPI_ADR_SPACE_TYPE) 11 873 874 #define ACPI_NUM_PREDEFINED_REGIONS 12 875 876 /* 877 * Special Address Spaces 878 * 879 * Note: A Data Table region is a special type of operation region 880 * that has its own AML opcode. However, internally, the AML 881 * interpreter simply creates an operation region with an address 882 * space type of ACPI_ADR_SPACE_DATA_TABLE. 883 */ 884 #define ACPI_ADR_SPACE_DATA_TABLE (ACPI_ADR_SPACE_TYPE) 0x7E /* Internal to ACPICA only */ 885 #define ACPI_ADR_SPACE_FIXED_HARDWARE (ACPI_ADR_SPACE_TYPE) 0x7F 886 887 /* Values for _REG connection code */ 888 889 #define ACPI_REG_DISCONNECT 0 890 #define ACPI_REG_CONNECT 1 891 892 /* 893 * BitRegister IDs 894 * 895 * These values are intended to be used by the hardware interfaces 896 * and are mapped to individual bitfields defined within the ACPI 897 * registers. See the AcpiGbl_BitRegisterInfo global table in utglobal.c 898 * for this mapping. 899 */ 900 901 /* PM1 Status register */ 902 903 #define ACPI_BITREG_TIMER_STATUS 0x00 904 #define ACPI_BITREG_BUS_MASTER_STATUS 0x01 905 #define ACPI_BITREG_GLOBAL_LOCK_STATUS 0x02 906 #define ACPI_BITREG_POWER_BUTTON_STATUS 0x03 907 #define ACPI_BITREG_SLEEP_BUTTON_STATUS 0x04 908 #define ACPI_BITREG_RT_CLOCK_STATUS 0x05 909 #define ACPI_BITREG_WAKE_STATUS 0x06 910 #define ACPI_BITREG_PCIEXP_WAKE_STATUS 0x07 911 912 /* PM1 Enable register */ 913 914 #define ACPI_BITREG_TIMER_ENABLE 0x08 915 #define ACPI_BITREG_GLOBAL_LOCK_ENABLE 0x09 916 #define ACPI_BITREG_POWER_BUTTON_ENABLE 0x0A 917 #define ACPI_BITREG_SLEEP_BUTTON_ENABLE 0x0B 918 #define ACPI_BITREG_RT_CLOCK_ENABLE 0x0C 919 #define ACPI_BITREG_PCIEXP_WAKE_DISABLE 0x0D 920 921 /* PM1 Control register */ 922 923 #define ACPI_BITREG_SCI_ENABLE 0x0E 924 #define ACPI_BITREG_BUS_MASTER_RLD 0x0F 925 #define ACPI_BITREG_GLOBAL_LOCK_RELEASE 0x10 926 #define ACPI_BITREG_SLEEP_TYPE 0x11 927 #define ACPI_BITREG_SLEEP_ENABLE 0x12 928 929 /* PM2 Control register */ 930 931 #define ACPI_BITREG_ARB_DISABLE 0x13 932 933 #define ACPI_BITREG_MAX 0x13 934 #define ACPI_NUM_BITREG ACPI_BITREG_MAX + 1 935 936 937 /* Status register values. A 1 clears a status bit. 0 = no effect */ 938 939 #define ACPI_CLEAR_STATUS 1 940 941 /* Enable and Control register values */ 942 943 #define ACPI_ENABLE_EVENT 1 944 #define ACPI_DISABLE_EVENT 0 945 946 947 /* Sleep function dispatch */ 948 949 typedef ACPI_STATUS (*ACPI_SLEEP_FUNCTION) ( 950 UINT8 SleepState); 951 952 typedef struct acpi_sleep_functions 953 { 954 ACPI_SLEEP_FUNCTION LegacyFunction; 955 ACPI_SLEEP_FUNCTION ExtendedFunction; 956 957 } ACPI_SLEEP_FUNCTIONS; 958 959 960 /* 961 * External ACPI object definition 962 */ 963 964 /* 965 * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package 966 * element or an unresolved named reference. 967 */ 968 typedef union acpi_object 969 { 970 ACPI_OBJECT_TYPE Type; /* See definition of AcpiNsType for values */ 971 struct 972 { 973 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_INTEGER */ 974 UINT64 Value; /* The actual number */ 975 } Integer; 976 977 struct 978 { 979 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_STRING */ 980 UINT32 Length; /* # of bytes in string, excluding trailing null */ 981 char *Pointer; /* points to the string value */ 982 } String; 983 984 struct 985 { 986 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_BUFFER */ 987 UINT32 Length; /* # of bytes in buffer */ 988 UINT8 *Pointer; /* points to the buffer */ 989 } Buffer; 990 991 struct 992 { 993 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_PACKAGE */ 994 UINT32 Count; /* # of elements in package */ 995 union acpi_object *Elements; /* Pointer to an array of ACPI_OBJECTs */ 996 } Package; 997 998 struct 999 { 1000 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_LOCAL_REFERENCE */ 1001 ACPI_OBJECT_TYPE ActualType; /* Type associated with the Handle */ 1002 ACPI_HANDLE Handle; /* object reference */ 1003 } Reference; 1004 1005 struct 1006 { 1007 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_PROCESSOR */ 1008 UINT32 ProcId; 1009 ACPI_IO_ADDRESS PblkAddress; 1010 UINT32 PblkLength; 1011 } Processor; 1012 1013 struct 1014 { 1015 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_POWER */ 1016 UINT32 SystemLevel; 1017 UINT32 ResourceOrder; 1018 } PowerResource; 1019 1020 } ACPI_OBJECT; 1021 1022 1023 /* 1024 * List of objects, used as a parameter list for control method evaluation 1025 */ 1026 typedef struct acpi_object_list 1027 { 1028 UINT32 Count; 1029 ACPI_OBJECT *Pointer; 1030 1031 } ACPI_OBJECT_LIST; 1032 1033 1034 /* 1035 * Miscellaneous common Data Structures used by the interfaces 1036 */ 1037 #define ACPI_NO_BUFFER 0 1038 1039 #ifdef ACPI_NO_MEM_ALLOCATIONS 1040 1041 #define ACPI_ALLOCATE_BUFFER (ACPI_SIZE) (0) 1042 #define ACPI_ALLOCATE_LOCAL_BUFFER (ACPI_SIZE) (0) 1043 1044 #else /* ACPI_NO_MEM_ALLOCATIONS */ 1045 1046 #define ACPI_ALLOCATE_BUFFER (ACPI_SIZE) (-1) /* Let ACPICA allocate buffer */ 1047 #define ACPI_ALLOCATE_LOCAL_BUFFER (ACPI_SIZE) (-2) /* For internal use only (enables tracking) */ 1048 1049 #endif /* ACPI_NO_MEM_ALLOCATIONS */ 1050 1051 typedef struct acpi_buffer 1052 { 1053 ACPI_SIZE Length; /* Length in bytes of the buffer */ 1054 void *Pointer; /* pointer to buffer */ 1055 1056 } ACPI_BUFFER; 1057 1058 1059 /* 1060 * NameType for AcpiGetName 1061 */ 1062 #define ACPI_FULL_PATHNAME 0 1063 #define ACPI_SINGLE_NAME 1 1064 #define ACPI_FULL_PATHNAME_NO_TRAILING 2 1065 #define ACPI_NAME_TYPE_MAX 2 1066 1067 1068 /* 1069 * Predefined Namespace items 1070 */ 1071 typedef struct acpi_predefined_names 1072 { 1073 const char *Name; 1074 UINT8 Type; 1075 char *Val; 1076 1077 } ACPI_PREDEFINED_NAMES; 1078 1079 1080 /* 1081 * Structure and flags for AcpiGetSystemInfo 1082 */ 1083 #define ACPI_SYS_MODE_UNKNOWN 0x0000 1084 #define ACPI_SYS_MODE_ACPI 0x0001 1085 #define ACPI_SYS_MODE_LEGACY 0x0002 1086 #define ACPI_SYS_MODES_MASK 0x0003 1087 1088 1089 /* 1090 * System info returned by AcpiGetSystemInfo() 1091 */ 1092 typedef struct acpi_system_info 1093 { 1094 UINT32 AcpiCaVersion; 1095 UINT32 Flags; 1096 UINT32 TimerResolution; 1097 UINT32 Reserved1; 1098 UINT32 Reserved2; 1099 UINT32 DebugLevel; 1100 UINT32 DebugLayer; 1101 1102 } ACPI_SYSTEM_INFO; 1103 1104 1105 /* 1106 * System statistics returned by AcpiGetStatistics() 1107 */ 1108 typedef struct acpi_statistics 1109 { 1110 UINT32 SciCount; 1111 UINT32 GpeCount; 1112 UINT32 FixedEventCount[ACPI_NUM_FIXED_EVENTS]; 1113 UINT32 MethodCount; 1114 1115 } ACPI_STATISTICS; 1116 1117 1118 /* 1119 * Types specific to the OS service interfaces 1120 */ 1121 typedef UINT32 1122 (ACPI_SYSTEM_XFACE *ACPI_OSD_HANDLER) ( 1123 void *Context); 1124 1125 typedef void 1126 (ACPI_SYSTEM_XFACE *ACPI_OSD_EXEC_CALLBACK) ( 1127 void *Context); 1128 1129 /* 1130 * Various handlers and callback procedures 1131 */ 1132 typedef 1133 UINT32 (*ACPI_SCI_HANDLER) ( 1134 void *Context); 1135 1136 typedef 1137 void (*ACPI_GBL_EVENT_HANDLER) ( 1138 UINT32 EventType, 1139 ACPI_HANDLE Device, 1140 UINT32 EventNumber, 1141 void *Context); 1142 1143 #define ACPI_EVENT_TYPE_GPE 0 1144 #define ACPI_EVENT_TYPE_FIXED 1 1145 1146 typedef 1147 UINT32 (*ACPI_EVENT_HANDLER) ( 1148 void *Context); 1149 1150 typedef 1151 UINT32 (*ACPI_GPE_HANDLER) ( 1152 ACPI_HANDLE GpeDevice, 1153 UINT32 GpeNumber, 1154 void *Context); 1155 1156 typedef 1157 void (*ACPI_NOTIFY_HANDLER) ( 1158 ACPI_HANDLE Device, 1159 UINT32 Value, 1160 void *Context); 1161 1162 typedef 1163 void (*ACPI_OBJECT_HANDLER) ( 1164 ACPI_HANDLE Object, 1165 void *Data); 1166 1167 typedef 1168 ACPI_STATUS (*ACPI_INIT_HANDLER) ( 1169 ACPI_HANDLE Object, 1170 UINT32 Function); 1171 1172 #define ACPI_INIT_DEVICE_INI 1 1173 1174 typedef 1175 ACPI_STATUS (*ACPI_EXCEPTION_HANDLER) ( 1176 ACPI_STATUS AmlStatus, 1177 ACPI_NAME Name, 1178 UINT16 Opcode, 1179 UINT32 AmlOffset, 1180 void *Context); 1181 1182 /* Table Event handler (Load, LoadTable, etc.) and types */ 1183 1184 typedef 1185 ACPI_STATUS (*ACPI_TABLE_HANDLER) ( 1186 UINT32 Event, 1187 void *Table, 1188 void *Context); 1189 1190 1191 /* Table Event Types */ 1192 1193 #define ACPI_TABLE_EVENT_LOAD 0x0 1194 #define ACPI_TABLE_EVENT_UNLOAD 0x1 1195 #define ACPI_TABLE_EVENT_INSTALL 0x2 1196 #define ACPI_TABLE_EVENT_UNINSTALL 0x3 1197 #define ACPI_NUM_TABLE_EVENTS 4 1198 1199 1200 /* Address Spaces (For Operation Regions) */ 1201 1202 typedef 1203 ACPI_STATUS (*ACPI_ADR_SPACE_HANDLER) ( 1204 UINT32 Function, 1205 ACPI_PHYSICAL_ADDRESS Address, 1206 UINT32 BitWidth, 1207 UINT64 *Value, 1208 void *HandlerContext, 1209 void *RegionContext); 1210 1211 #define ACPI_DEFAULT_HANDLER NULL 1212 1213 /* Special Context data for GenericSerialBus/GeneralPurposeIo (ACPI 5.0) */ 1214 1215 typedef struct acpi_connection_info 1216 { 1217 UINT8 *Connection; 1218 UINT16 Length; 1219 UINT8 AccessLength; 1220 1221 } ACPI_CONNECTION_INFO; 1222 1223 /* Special Context data for PCC Opregion (ACPI 6.3) */ 1224 1225 typedef struct acpi_pcc_info { 1226 UINT8 SubspaceId; 1227 UINT16 Length; 1228 UINT8 *InternalBuffer; 1229 } ACPI_PCC_INFO; 1230 1231 /* Special Context data for FFH Opregion (ACPI 6.5) */ 1232 1233 typedef struct acpi_ffh_info { 1234 UINT64 Offset; 1235 UINT64 Length; 1236 } ACPI_FFH_INFO; 1237 1238 typedef 1239 ACPI_STATUS (*ACPI_ADR_SPACE_SETUP) ( 1240 ACPI_HANDLE RegionHandle, 1241 UINT32 Function, 1242 void *HandlerContext, 1243 void **RegionContext); 1244 1245 #define ACPI_REGION_ACTIVATE 0 1246 #define ACPI_REGION_DEACTIVATE 1 1247 1248 typedef 1249 ACPI_STATUS (*ACPI_WALK_CALLBACK) ( 1250 ACPI_HANDLE Object, 1251 UINT32 NestingLevel, 1252 void *Context, 1253 void **ReturnValue); 1254 1255 typedef 1256 UINT32 (*ACPI_INTERFACE_HANDLER) ( 1257 ACPI_STRING InterfaceName, 1258 UINT32 Supported); 1259 1260 1261 /* Interrupt handler return values */ 1262 1263 #define ACPI_INTERRUPT_NOT_HANDLED 0x00 1264 #define ACPI_INTERRUPT_HANDLED 0x01 1265 1266 /* GPE handler return values */ 1267 1268 #define ACPI_REENABLE_GPE 0x80 1269 1270 1271 /* Length of 32-bit EISAID values when converted back to a string */ 1272 1273 #define ACPI_EISAID_STRING_SIZE 8 /* Includes null terminator */ 1274 1275 /* Length of UUID (string) values */ 1276 1277 #define ACPI_UUID_LENGTH 16 1278 1279 /* Length of 3-byte PCI class code values when converted back to a string */ 1280 1281 #define ACPI_PCICLS_STRING_SIZE 7 /* Includes null terminator */ 1282 1283 1284 /* Structures used for device/processor HID, UID, CID */ 1285 1286 typedef struct acpi_pnp_device_id 1287 { 1288 UINT32 Length; /* Length of string + null */ 1289 char *String; 1290 1291 } ACPI_PNP_DEVICE_ID; 1292 1293 typedef struct acpi_pnp_device_id_list 1294 { 1295 UINT32 Count; /* Number of IDs in Ids array */ 1296 UINT32 ListSize; /* Size of list, including ID strings */ 1297 ACPI_PNP_DEVICE_ID Ids[]; /* ID array */ 1298 1299 } ACPI_PNP_DEVICE_ID_LIST; 1300 1301 /* 1302 * Structure returned from AcpiGetObjectInfo. 1303 * Optimized for both 32-bit and 64-bit builds. 1304 */ 1305 typedef struct acpi_device_info 1306 { 1307 UINT32 InfoSize; /* Size of info, including ID strings */ 1308 UINT32 Name; /* ACPI object Name */ 1309 ACPI_OBJECT_TYPE Type; /* ACPI object Type */ 1310 UINT8 ParamCount; /* If a method, required parameter count */ 1311 UINT16 Valid; /* Indicates which optional fields are valid */ 1312 UINT8 Flags; /* Miscellaneous info */ 1313 UINT8 HighestDstates[4]; /* _SxD values: 0xFF indicates not valid */ 1314 UINT8 LowestDstates[5]; /* _SxW values: 0xFF indicates not valid */ 1315 UINT64 Address; /* _ADR value */ 1316 ACPI_PNP_DEVICE_ID HardwareId; /* _HID value */ 1317 ACPI_PNP_DEVICE_ID UniqueId; /* _UID value */ 1318 ACPI_PNP_DEVICE_ID ClassCode; /* _CLS value */ 1319 ACPI_PNP_DEVICE_ID_LIST CompatibleIdList; /* _CID list <must be last> */ 1320 1321 } ACPI_DEVICE_INFO; 1322 1323 /* Values for Flags field above (AcpiGetObjectInfo) */ 1324 1325 #define ACPI_PCI_ROOT_BRIDGE 0x01 1326 1327 /* Flags for Valid field above (AcpiGetObjectInfo) */ 1328 1329 #define ACPI_VALID_ADR 0x0002 1330 #define ACPI_VALID_HID 0x0004 1331 #define ACPI_VALID_UID 0x0008 1332 #define ACPI_VALID_CID 0x0020 1333 #define ACPI_VALID_CLS 0x0040 1334 #define ACPI_VALID_SXDS 0x0100 1335 #define ACPI_VALID_SXWS 0x0200 1336 1337 /* Flags for _STA method */ 1338 1339 #define ACPI_STA_DEVICE_PRESENT 0x01 1340 #define ACPI_STA_DEVICE_ENABLED 0x02 1341 #define ACPI_STA_DEVICE_UI 0x04 1342 #define ACPI_STA_DEVICE_FUNCTIONING 0x08 1343 #define ACPI_STA_DEVICE_OK 0x08 /* Synonym */ 1344 #define ACPI_STA_BATTERY_PRESENT 0x10 1345 1346 1347 /* Context structs for address space handlers */ 1348 1349 typedef struct acpi_pci_id 1350 { 1351 UINT16 Segment; 1352 UINT16 Bus; 1353 UINT16 Device; 1354 UINT16 Function; 1355 1356 } ACPI_PCI_ID; 1357 1358 typedef struct acpi_mem_mapping 1359 { 1360 ACPI_PHYSICAL_ADDRESS PhysicalAddress; 1361 UINT8 *LogicalAddress; 1362 ACPI_SIZE Length; 1363 struct acpi_mem_mapping *NextMm; 1364 1365 } ACPI_MEM_MAPPING; 1366 1367 typedef struct acpi_mem_space_context 1368 { 1369 UINT32 Length; 1370 ACPI_PHYSICAL_ADDRESS Address; 1371 ACPI_MEM_MAPPING *CurMm; 1372 ACPI_MEM_MAPPING *FirstMm; 1373 1374 } ACPI_MEM_SPACE_CONTEXT; 1375 1376 typedef struct acpi_data_table_space_context 1377 { 1378 void *Pointer; 1379 1380 } ACPI_DATA_TABLE_MAPPING; 1381 1382 1383 /* 1384 * ACPI_MEMORY_LIST is used only if the ACPICA local cache is enabled 1385 */ 1386 typedef struct acpi_memory_list 1387 { 1388 const char *ListName; 1389 void *ListHead; 1390 UINT16 ObjectSize; 1391 UINT16 MaxDepth; 1392 UINT16 CurrentDepth; 1393 1394 #ifdef ACPI_DBG_TRACK_ALLOCATIONS 1395 1396 /* Statistics for debug memory tracking only */ 1397 1398 UINT32 TotalAllocated; 1399 UINT32 TotalFreed; 1400 UINT32 MaxOccupied; 1401 UINT32 TotalSize; 1402 UINT32 CurrentTotalSize; 1403 UINT32 Requests; 1404 UINT32 Hits; 1405 #endif 1406 1407 } ACPI_MEMORY_LIST; 1408 1409 1410 /* Definitions of trace event types */ 1411 1412 typedef enum 1413 { 1414 ACPI_TRACE_AML_METHOD, 1415 ACPI_TRACE_AML_OPCODE, 1416 ACPI_TRACE_AML_REGION 1417 1418 } ACPI_TRACE_EVENT_TYPE; 1419 1420 1421 /* Definitions of _OSI support */ 1422 1423 #define ACPI_VENDOR_STRINGS 0x01 1424 #define ACPI_FEATURE_STRINGS 0x02 1425 #define ACPI_ENABLE_INTERFACES 0x00 1426 #define ACPI_DISABLE_INTERFACES 0x04 1427 1428 #define ACPI_DISABLE_ALL_VENDOR_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS) 1429 #define ACPI_DISABLE_ALL_FEATURE_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_FEATURE_STRINGS) 1430 #define ACPI_DISABLE_ALL_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS) 1431 #define ACPI_ENABLE_ALL_VENDOR_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS) 1432 #define ACPI_ENABLE_ALL_FEATURE_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_FEATURE_STRINGS) 1433 #define ACPI_ENABLE_ALL_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS) 1434 1435 #define ACPI_OSI_WIN_2000 0x01 1436 #define ACPI_OSI_WIN_XP 0x02 1437 #define ACPI_OSI_WIN_XP_SP1 0x03 1438 #define ACPI_OSI_WINSRV_2003 0x04 1439 #define ACPI_OSI_WIN_XP_SP2 0x05 1440 #define ACPI_OSI_WINSRV_2003_SP1 0x06 1441 #define ACPI_OSI_WIN_VISTA 0x07 1442 #define ACPI_OSI_WINSRV_2008 0x08 1443 #define ACPI_OSI_WIN_VISTA_SP1 0x09 1444 #define ACPI_OSI_WIN_VISTA_SP2 0x0A 1445 #define ACPI_OSI_WIN_7 0x0B 1446 #define ACPI_OSI_WIN_8 0x0C 1447 #define ACPI_OSI_WIN_8_1 0x0D 1448 #define ACPI_OSI_WIN_10 0x0E 1449 #define ACPI_OSI_WIN_10_RS1 0x0F 1450 #define ACPI_OSI_WIN_10_RS2 0x10 1451 #define ACPI_OSI_WIN_10_RS3 0x11 1452 #define ACPI_OSI_WIN_10_RS4 0x12 1453 #define ACPI_OSI_WIN_10_RS5 0x13 1454 #define ACPI_OSI_WIN_10_19H1 0x14 1455 #define ACPI_OSI_WIN_10_20H1 0x15 1456 #define ACPI_OSI_WIN_11 0x16 1457 1458 1459 /* Definitions of getopt */ 1460 1461 #define ACPI_OPT_END -1 1462 1463 /* Definitions for explicit fallthrough */ 1464 1465 #ifndef ACPI_FALLTHROUGH 1466 #define ACPI_FALLTHROUGH do {} while(0) 1467 #endif 1468 1469 #endif /* __ACTYPES_H__ */ 1470