1 /* $OpenBSD: servconf.h,v 1.165 2024/06/12 22:36:00 djm Exp $ */ 2 3 /* 4 * Author: Tatu Ylonen <ylo@cs.hut.fi> 5 * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland 6 * All rights reserved 7 * Definitions for server configuration data and for the functions reading it. 8 * 9 * As far as I am concerned, the code I have written for this software 10 * can be used freely for any purpose. Any derived versions of this 11 * software must be clearly marked as such, and if the derived work is 12 * incompatible with the protocol description in the RFC file, it must be 13 * called by a name other than "ssh" or "Secure Shell". 14 */ 15 16 #ifndef SERVCONF_H 17 #define SERVCONF_H 18 19 #include <sys/queue.h> 20 21 #define MAX_PORTS 256 /* Max # ports. */ 22 23 /* permit_root_login */ 24 #define PERMIT_NOT_SET -1 25 #define PERMIT_NO 0 26 #define PERMIT_FORCED_ONLY 1 27 #define PERMIT_NO_PASSWD 2 28 #define PERMIT_YES 3 29 30 /* PermitOpen */ 31 #define PERMITOPEN_ANY 0 32 #define PERMITOPEN_NONE -2 33 34 /* IgnoreRhosts */ 35 #define IGNORE_RHOSTS_NO 0 36 #define IGNORE_RHOSTS_YES 1 37 #define IGNORE_RHOSTS_SHOSTS 2 38 39 #define DEFAULT_AUTH_FAIL_MAX 6 /* Default for MaxAuthTries */ 40 #define DEFAULT_SESSIONS_MAX 10 /* Default for MaxSessions */ 41 42 /* Magic name for internal sftp-server */ 43 #define INTERNAL_SFTP_NAME "internal-sftp" 44 45 /* PubkeyAuthOptions flags */ 46 #define PUBKEYAUTH_TOUCH_REQUIRED (1) 47 #define PUBKEYAUTH_VERIFY_REQUIRED (1<<1) 48 49 struct ssh; 50 51 /* 52 * Used to store addresses from ListenAddr directives. These may be 53 * incomplete, as they may specify addresses that need to be merged 54 * with any ports requested by ListenPort. 55 */ 56 struct queued_listenaddr { 57 char *addr; 58 int port; /* <=0 if unspecified */ 59 char *rdomain; 60 }; 61 62 /* Resolved listen addresses, grouped by optional routing domain */ 63 struct listenaddr { 64 char *rdomain; 65 struct addrinfo *addrs; 66 }; 67 68 #define PER_SOURCE_PENALTY_OVERFLOW_DENY_ALL 1 69 #define PER_SOURCE_PENALTY_OVERFLOW_PERMISSIVE 2 70 struct per_source_penalty { 71 int enabled; 72 int max_sources4; 73 int max_sources6; 74 int overflow_mode; 75 int overflow_mode6; 76 int penalty_crash; 77 int penalty_grace; 78 int penalty_authfail; 79 int penalty_noauth; 80 int penalty_max; 81 int penalty_min; 82 }; 83 84 typedef struct { 85 u_int num_ports; 86 u_int ports_from_cmdline; 87 int ports[MAX_PORTS]; /* Port number to listen on. */ 88 struct queued_listenaddr *queued_listen_addrs; 89 u_int num_queued_listens; 90 struct listenaddr *listen_addrs; 91 u_int num_listen_addrs; 92 int address_family; /* Address family used by the server. */ 93 94 char *routing_domain; /* Bind session to routing domain */ 95 96 char **host_key_files; /* Files containing host keys. */ 97 int *host_key_file_userprovided; /* Key was specified by user. */ 98 u_int num_host_key_files; /* Number of files for host keys. */ 99 char **host_cert_files; /* Files containing host certs. */ 100 u_int num_host_cert_files; /* Number of files for host certs. */ 101 102 char *host_key_agent; /* ssh-agent socket for host keys. */ 103 char *pid_file; /* Where to put our pid */ 104 char *moduli_file; /* moduli file for DH-GEX */ 105 int login_grace_time; /* Disconnect if no auth in this time 106 * (sec). */ 107 int permit_root_login; /* PERMIT_*, see above */ 108 int ignore_rhosts; /* Ignore .rhosts and .shosts. */ 109 int ignore_user_known_hosts; /* Ignore ~/.ssh/known_hosts 110 * for RhostsRsaAuth */ 111 int print_motd; /* If true, print /etc/motd. */ 112 int print_lastlog; /* If true, print lastlog */ 113 int x11_forwarding; /* If true, permit inet (spoofing) X11 fwd. */ 114 int x11_display_offset; /* What DISPLAY number to start 115 * searching at */ 116 int x11_use_localhost; /* If true, use localhost for fake X11 server. */ 117 char *xauth_location; /* Location of xauth program */ 118 int permit_tty; /* If false, deny pty allocation */ 119 int permit_user_rc; /* If false, deny ~/.ssh/rc execution */ 120 int strict_modes; /* If true, require string home dir modes. */ 121 int tcp_keep_alive; /* If true, set SO_KEEPALIVE. */ 122 int ip_qos_interactive; /* IP ToS/DSCP/class for interactive */ 123 int ip_qos_bulk; /* IP ToS/DSCP/class for bulk traffic */ 124 char *ciphers; /* Supported SSH2 ciphers. */ 125 char *macs; /* Supported SSH2 macs. */ 126 char *kex_algorithms; /* SSH2 kex methods in order of preference. */ 127 struct ForwardOptions fwd_opts; /* forwarding options */ 128 SyslogFacility log_facility; /* Facility for system logging. */ 129 LogLevel log_level; /* Level for system logging. */ 130 u_int num_log_verbose; /* Verbose log overrides */ 131 char **log_verbose; 132 int hostbased_authentication; /* If true, permit ssh2 hostbased auth */ 133 int hostbased_uses_name_from_packet_only; /* experimental */ 134 char *hostbased_accepted_algos; /* Algos allowed for hostbased */ 135 char *hostkeyalgorithms; /* SSH2 server key types */ 136 char *ca_sign_algorithms; /* Allowed CA signature algorithms */ 137 int pubkey_authentication; /* If true, permit ssh2 pubkey authentication. */ 138 char *pubkey_accepted_algos; /* Signature algos allowed for pubkey */ 139 int pubkey_auth_options; /* -1 or mask of PUBKEYAUTH_* flags */ 140 int kerberos_authentication; /* If true, permit Kerberos 141 * authentication. */ 142 int kerberos_or_local_passwd; /* If true, permit kerberos 143 * and any other password 144 * authentication mechanism, 145 * such as SecurID or 146 * /etc/passwd */ 147 int kerberos_ticket_cleanup; /* If true, destroy ticket 148 * file on logout. */ 149 int kerberos_get_afs_token; /* If true, try to get AFS token if 150 * authenticated with Kerberos. */ 151 int gss_authentication; /* If true, permit GSSAPI authentication */ 152 int gss_cleanup_creds; /* If true, destroy cred cache on logout */ 153 int gss_strict_acceptor; /* If true, restrict the GSSAPI acceptor name */ 154 int password_authentication; /* If true, permit password 155 * authentication. */ 156 int kbd_interactive_authentication; /* If true, permit */ 157 int permit_empty_passwd; /* If false, do not permit empty 158 * passwords. */ 159 int permit_user_env; /* If true, read ~/.ssh/environment */ 160 char *permit_user_env_allowlist; /* pattern-list of allowed env names */ 161 int compression; /* If true, compression is allowed */ 162 int allow_tcp_forwarding; /* One of FORWARD_* */ 163 int allow_streamlocal_forwarding; /* One of FORWARD_* */ 164 int allow_agent_forwarding; 165 int disable_forwarding; 166 u_int num_allow_users; 167 char **allow_users; 168 u_int num_deny_users; 169 char **deny_users; 170 u_int num_allow_groups; 171 char **allow_groups; 172 u_int num_deny_groups; 173 char **deny_groups; 174 175 u_int num_subsystems; 176 char **subsystem_name; 177 char **subsystem_command; 178 char **subsystem_args; 179 180 u_int num_accept_env; 181 char **accept_env; 182 u_int num_setenv; 183 char **setenv; 184 185 int max_startups_begin; 186 int max_startups_rate; 187 int max_startups; 188 int per_source_max_startups; 189 int per_source_masklen_ipv4; 190 int per_source_masklen_ipv6; 191 char *per_source_penalty_exempt; 192 struct per_source_penalty per_source_penalty; 193 int max_authtries; 194 int max_sessions; 195 char *banner; /* SSH-2 banner message */ 196 int use_dns; 197 int client_alive_interval; /* 198 * poke the client this often to 199 * see if it's still there 200 */ 201 int client_alive_count_max; /* 202 * If the client is unresponsive 203 * for this many intervals above, 204 * disconnect the session 205 */ 206 207 u_int num_authkeys_files; /* Files containing public keys */ 208 char **authorized_keys_files; 209 210 char *adm_forced_command; 211 212 int permit_tun; 213 214 char **permitted_opens; /* May also be one of PERMITOPEN_* */ 215 u_int num_permitted_opens; 216 char **permitted_listens; /* May also be one of PERMITOPEN_* */ 217 u_int num_permitted_listens; 218 219 char *chroot_directory; 220 char *revoked_keys_file; 221 char *trusted_user_ca_keys; 222 char *authorized_keys_command; 223 char *authorized_keys_command_user; 224 char *authorized_principals_file; 225 char *authorized_principals_command; 226 char *authorized_principals_command_user; 227 228 int64_t rekey_limit; 229 int rekey_interval; 230 231 char *version_addendum; /* Appended to SSH banner */ 232 233 u_int num_auth_methods; 234 char **auth_methods; 235 236 int fingerprint_hash; 237 int expose_userauth_info; 238 u_int64_t timing_secret; 239 char *sk_provider; 240 int required_rsa_size; /* minimum size of RSA keys */ 241 242 char **channel_timeouts; /* inactivity timeout by channel type */ 243 u_int num_channel_timeouts; 244 245 int unused_connection_timeout; 246 247 char *sshd_session_path; 248 } ServerOptions; 249 250 /* Information about the incoming connection as used by Match */ 251 struct connection_info { 252 const char *user; 253 const char *host; /* possibly resolved hostname */ 254 const char *address; /* remote address */ 255 const char *laddress; /* local address */ 256 int lport; /* local port */ 257 const char *rdomain; /* routing domain if available */ 258 int test; /* test mode, allow some attributes to be 259 * unspecified */ 260 }; 261 262 /* List of included files for re-exec from the parsed configuration */ 263 struct include_item { 264 char *selector; 265 char *filename; 266 struct sshbuf *contents; 267 TAILQ_ENTRY(include_item) entry; 268 }; 269 TAILQ_HEAD(include_list, include_item); 270 271 272 /* 273 * These are string config options that must be copied between the 274 * Match sub-config and the main config, and must be sent from the 275 * privsep child to the privsep master. We use a macro to ensure all 276 * the options are copied and the copies are done in the correct order. 277 * 278 * NB. an option must appear in servconf.c:copy_set_server_options() or 279 * COPY_MATCH_STRING_OPTS here but never both. 280 */ 281 #define COPY_MATCH_STRING_OPTS() do { \ 282 M_CP_STROPT(banner); \ 283 M_CP_STROPT(trusted_user_ca_keys); \ 284 M_CP_STROPT(revoked_keys_file); \ 285 M_CP_STROPT(authorized_keys_command); \ 286 M_CP_STROPT(authorized_keys_command_user); \ 287 M_CP_STROPT(authorized_principals_file); \ 288 M_CP_STROPT(authorized_principals_command); \ 289 M_CP_STROPT(authorized_principals_command_user); \ 290 M_CP_STROPT(hostbased_accepted_algos); \ 291 M_CP_STROPT(pubkey_accepted_algos); \ 292 M_CP_STROPT(ca_sign_algorithms); \ 293 M_CP_STROPT(routing_domain); \ 294 M_CP_STROPT(permit_user_env_allowlist); \ 295 M_CP_STRARRAYOPT(authorized_keys_files, num_authkeys_files); \ 296 M_CP_STRARRAYOPT(allow_users, num_allow_users); \ 297 M_CP_STRARRAYOPT(deny_users, num_deny_users); \ 298 M_CP_STRARRAYOPT(allow_groups, num_allow_groups); \ 299 M_CP_STRARRAYOPT(deny_groups, num_deny_groups); \ 300 M_CP_STRARRAYOPT(accept_env, num_accept_env); \ 301 M_CP_STRARRAYOPT(setenv, num_setenv); \ 302 M_CP_STRARRAYOPT(auth_methods, num_auth_methods); \ 303 M_CP_STRARRAYOPT(permitted_opens, num_permitted_opens); \ 304 M_CP_STRARRAYOPT(permitted_listens, num_permitted_listens); \ 305 M_CP_STRARRAYOPT(channel_timeouts, num_channel_timeouts); \ 306 M_CP_STRARRAYOPT(log_verbose, num_log_verbose); \ 307 M_CP_STRARRAYOPT(subsystem_name, num_subsystems); \ 308 M_CP_STRARRAYOPT(subsystem_command, num_subsystems); \ 309 M_CP_STRARRAYOPT(subsystem_args, num_subsystems); \ 310 } while (0) 311 312 void initialize_server_options(ServerOptions *); 313 void fill_default_server_options(ServerOptions *); 314 int process_server_config_line(ServerOptions *, char *, const char *, int, 315 int *, struct connection_info *, struct include_list *includes); 316 void load_server_config(const char *, struct sshbuf *); 317 void parse_server_config(ServerOptions *, const char *, struct sshbuf *, 318 struct include_list *includes, struct connection_info *, int); 319 void parse_server_match_config(ServerOptions *, 320 struct include_list *includes, struct connection_info *); 321 int parse_server_match_testspec(struct connection_info *, char *); 322 void servconf_merge_subsystems(ServerOptions *, ServerOptions *); 323 void copy_set_server_options(ServerOptions *, ServerOptions *, int); 324 void dump_config(ServerOptions *); 325 char *derelativise_path(const char *); 326 void servconf_add_hostkey(const char *, const int, 327 ServerOptions *, const char *path, int); 328 void servconf_add_hostcert(const char *, const int, 329 ServerOptions *, const char *path); 330 331 #endif /* SERVCONF_H */ 332