1 /* $NetBSD: if_cue.c,v 1.108 2022/08/20 14:09:10 riastradh Exp $ */
2
3 /*
4 * Copyright (c) 1997, 1998, 1999, 2000
5 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. All advertising materials mentioning features or use of this software
16 * must display the following acknowledgement:
17 * This product includes software developed by Bill Paul.
18 * 4. Neither the name of the author nor the names of any co-contributors
19 * may be used to endorse or promote products derived from this software
20 * without specific prior written permission.
21 *
22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32 * THE POSSIBILITY OF SUCH DAMAGE.
33 *
34 * $FreeBSD: src/sys/dev/usb/if_cue.c,v 1.4 2000/01/16 22:45:06 wpaul Exp $
35 */
36
37 /*
38 * CATC USB-EL1210A USB to ethernet driver. Used in the CATC Netmate
39 * adapters and others.
40 *
41 * Written by Bill Paul <wpaul@ee.columbia.edu>
42 * Electrical Engineering Department
43 * Columbia University, New York City
44 */
45
46 /*
47 * The CATC USB-EL1210A provides USB ethernet support at 10Mbps. The
48 * RX filter uses a 512-bit multicast hash table, single perfect entry
49 * for the station address, and promiscuous mode. Unlike the ADMtek
50 * and KLSI chips, the CATC ASIC supports read and write combining
51 * mode where multiple packets can be transferred using a single bulk
52 * transaction, which helps performance a great deal.
53 */
54
55 /*
56 * Ported to NetBSD and somewhat rewritten by Lennart Augustsson.
57 */
58
59 #include <sys/cdefs.h>
60 __KERNEL_RCSID(0, "$NetBSD: if_cue.c,v 1.108 2022/08/20 14:09:10 riastradh Exp $");
61
62 #ifdef _KERNEL_OPT
63 #include "opt_inet.h"
64 #include "opt_usb.h"
65 #endif
66
67 #include <sys/param.h>
68
69 #include <dev/usb/usbnet.h>
70 #include <dev/usb/if_cuereg.h>
71
72 #ifdef INET
73 #include <netinet/in.h>
74 #include <netinet/if_inarp.h>
75 #endif
76
77 #ifdef CUE_DEBUG
78 #define DPRINTF(x) if (cuedebug) printf x
79 #define DPRINTFN(n, x) if (cuedebug >= (n)) printf x
80 int cuedebug = 0;
81 #else
82 #define DPRINTF(x)
83 #define DPRINTFN(n, x)
84 #endif
85
86 #define CUE_BUFSZ 1536
87 #define CUE_MIN_FRAMELEN 60
88 #define CUE_RX_FRAMES 1
89 #define CUE_TX_FRAMES 1
90
91 #define CUE_CONFIG_NO 1
92 #define CUE_IFACE_IDX 0
93
94 #define CUE_RX_LIST_CNT 1
95 #define CUE_TX_LIST_CNT 1
96
97 struct cue_type {
98 uint16_t cue_vid;
99 uint16_t cue_did;
100 };
101
102 struct cue_softc;
103
104 struct cue_chain {
105 struct cue_softc *cue_sc;
106 struct usbd_xfer *cue_xfer;
107 char *cue_buf;
108 struct mbuf *cue_mbuf;
109 int cue_idx;
110 };
111
112 struct cue_cdata {
113 struct cue_chain cue_tx_chain[CUE_TX_LIST_CNT];
114 struct cue_chain cue_rx_chain[CUE_RX_LIST_CNT];
115 int cue_tx_prod;
116 int cue_tx_cnt;
117 };
118
119 struct cue_softc {
120 struct usbnet cue_un;
121 uint8_t cue_mctab[CUE_MCAST_TABLE_LEN];
122 };
123
124 /*
125 * Various supported device vendors/products.
126 */
127 static const struct usb_devno cue_devs[] = {
128 { USB_VENDOR_CATC, USB_PRODUCT_CATC_NETMATE },
129 { USB_VENDOR_CATC, USB_PRODUCT_CATC_NETMATE2 },
130 { USB_VENDOR_SMARTBRIDGES, USB_PRODUCT_SMARTBRIDGES_SMARTLINK },
131 /* Belkin F5U111 adapter covered by NETMATE entry */
132 };
133 #define cue_lookup(v, p) (usb_lookup(cue_devs, v, p))
134
135 static int cue_match(device_t, cfdata_t, void *);
136 static void cue_attach(device_t, device_t, void *);
137
138 CFATTACH_DECL_NEW(cue, sizeof(struct cue_softc), cue_match, cue_attach,
139 usbnet_detach, usbnet_activate);
140
141 static unsigned cue_uno_tx_prepare(struct usbnet *, struct mbuf *,
142 struct usbnet_chain *);
143 static void cue_uno_rx_loop(struct usbnet *, struct usbnet_chain *, uint32_t);
144 static void cue_uno_mcast(struct ifnet *);
145 static void cue_uno_stop(struct ifnet *, int);
146 static int cue_uno_init(struct ifnet *);
147 static void cue_uno_tick(struct usbnet *);
148
149 static const struct usbnet_ops cue_ops = {
150 .uno_stop = cue_uno_stop,
151 .uno_mcast = cue_uno_mcast,
152 .uno_tx_prepare = cue_uno_tx_prepare,
153 .uno_rx_loop = cue_uno_rx_loop,
154 .uno_init = cue_uno_init,
155 .uno_tick = cue_uno_tick,
156 };
157
158 #ifdef CUE_DEBUG
159 static int
cue_csr_read_1(struct usbnet * un,int reg)160 cue_csr_read_1(struct usbnet *un, int reg)
161 {
162 usb_device_request_t req;
163 usbd_status err;
164 uint8_t val = 0;
165
166 if (usbnet_isdying(un))
167 return 0;
168
169 req.bmRequestType = UT_READ_VENDOR_DEVICE;
170 req.bRequest = CUE_CMD_READREG;
171 USETW(req.wValue, 0);
172 USETW(req.wIndex, reg);
173 USETW(req.wLength, 1);
174
175 err = usbd_do_request(un->un_udev, &req, &val);
176
177 if (err) {
178 DPRINTF(("%s: cue_csr_read_1: reg=%#x err=%s\n",
179 device_xname(un->un_dev), reg, usbd_errstr(err)));
180 return 0;
181 }
182
183 DPRINTFN(10,("%s: cue_csr_read_1 reg=%#x val=%#x\n",
184 device_xname(un->un_dev), reg, val));
185
186 return val;
187 }
188 #endif
189
190 static int
cue_csr_read_2(struct usbnet * un,int reg)191 cue_csr_read_2(struct usbnet *un, int reg)
192 {
193 usb_device_request_t req;
194 usbd_status err;
195 uWord val;
196
197 if (usbnet_isdying(un))
198 return 0;
199
200 req.bmRequestType = UT_READ_VENDOR_DEVICE;
201 req.bRequest = CUE_CMD_READREG;
202 USETW(req.wValue, 0);
203 USETW(req.wIndex, reg);
204 USETW(req.wLength, 2);
205
206 err = usbd_do_request(un->un_udev, &req, &val);
207
208 DPRINTFN(10,("%s: cue_csr_read_2 reg=%#x val=%#x\n",
209 device_xname(un->un_dev), reg, UGETW(val)));
210
211 if (err) {
212 DPRINTF(("%s: cue_csr_read_2: reg=%#x err=%s\n",
213 device_xname(un->un_dev), reg, usbd_errstr(err)));
214 return 0;
215 }
216
217 return UGETW(val);
218 }
219
220 static int
cue_csr_write_1(struct usbnet * un,int reg,int val)221 cue_csr_write_1(struct usbnet *un, int reg, int val)
222 {
223 usb_device_request_t req;
224 usbd_status err;
225
226 if (usbnet_isdying(un))
227 return 0;
228
229 DPRINTFN(10,("%s: cue_csr_write_1 reg=%#x val=%#x\n",
230 device_xname(un->un_dev), reg, val));
231
232 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
233 req.bRequest = CUE_CMD_WRITEREG;
234 USETW(req.wValue, val);
235 USETW(req.wIndex, reg);
236 USETW(req.wLength, 0);
237
238 err = usbd_do_request(un->un_udev, &req, NULL);
239
240 if (err) {
241 DPRINTF(("%s: cue_csr_write_1: reg=%#x err=%s\n",
242 device_xname(un->un_dev), reg, usbd_errstr(err)));
243 return -1;
244 }
245
246 DPRINTFN(20,("%s: cue_csr_write_1, after reg=%#x val=%#x\n",
247 device_xname(un->un_dev), reg, cue_csr_read_1(un, reg)));
248
249 return 0;
250 }
251
252 #if 0
253 static int
254 cue_csr_write_2(struct usbnet *un, int reg, int aval)
255 {
256 usb_device_request_t req;
257 usbd_status err;
258 uWord val;
259 int s;
260
261 if (usbnet_isdying(un))
262 return 0;
263
264 DPRINTFN(10,("%s: cue_csr_write_2 reg=%#x val=%#x\n",
265 device_xname(un->un_dev), reg, aval));
266
267 USETW(val, aval);
268 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
269 req.bRequest = CUE_CMD_WRITEREG;
270 USETW(req.wValue, val);
271 USETW(req.wIndex, reg);
272 USETW(req.wLength, 0);
273
274 err = usbd_do_request(un->un_udev, &req, NULL);
275
276 if (err) {
277 DPRINTF(("%s: cue_csr_write_2: reg=%#x err=%s\n",
278 device_xname(un->un_dev), reg, usbd_errstr(err)));
279 return -1;
280 }
281
282 return 0;
283 }
284 #endif
285
286 static int
cue_mem(struct usbnet * un,int cmd,int addr,void * buf,int len)287 cue_mem(struct usbnet *un, int cmd, int addr, void *buf, int len)
288 {
289 usb_device_request_t req;
290 usbd_status err;
291
292 DPRINTFN(10,("%s: cue_mem cmd=%#x addr=%#x len=%d\n",
293 device_xname(un->un_dev), cmd, addr, len));
294
295 if (cmd == CUE_CMD_READSRAM)
296 req.bmRequestType = UT_READ_VENDOR_DEVICE;
297 else
298 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
299 req.bRequest = cmd;
300 USETW(req.wValue, 0);
301 USETW(req.wIndex, addr);
302 USETW(req.wLength, len);
303
304 err = usbd_do_request(un->un_udev, &req, buf);
305
306 if (err) {
307 DPRINTF(("%s: cue_csr_mem: addr=%#x err=%s\n",
308 device_xname(un->un_dev), addr, usbd_errstr(err)));
309 return -1;
310 }
311
312 return 0;
313 }
314
315 static int
cue_getmac(struct usbnet * un)316 cue_getmac(struct usbnet *un)
317 {
318 usb_device_request_t req;
319 usbd_status err;
320
321 DPRINTFN(10,("%s: cue_getmac\n", device_xname(un->un_dev)));
322
323 req.bmRequestType = UT_READ_VENDOR_DEVICE;
324 req.bRequest = CUE_CMD_GET_MACADDR;
325 USETW(req.wValue, 0);
326 USETW(req.wIndex, 0);
327 USETW(req.wLength, ETHER_ADDR_LEN);
328
329 err = usbd_do_request(un->un_udev, &req, un->un_eaddr);
330
331 if (err) {
332 printf("%s: read MAC address failed\n",
333 device_xname(un->un_dev));
334 return -1;
335 }
336
337 return 0;
338 }
339
340 #define CUE_POLY 0xEDB88320
341 #define CUE_BITS 9
342
343 static uint32_t
cue_crc(const char * addr)344 cue_crc(const char *addr)
345 {
346 uint32_t idx, bit, data, crc;
347
348 /* Compute CRC for the address value. */
349 crc = 0xFFFFFFFF; /* initial value */
350
351 for (idx = 0; idx < 6; idx++) {
352 for (data = *addr++, bit = 0; bit < 8; bit++, data >>= 1)
353 crc = (crc >> 1) ^ (((crc ^ data) & 1) ? CUE_POLY : 0);
354 }
355
356 return crc & ((1 << CUE_BITS) - 1);
357 }
358
359 static void
cue_uno_mcast(struct ifnet * ifp)360 cue_uno_mcast(struct ifnet *ifp)
361 {
362 struct usbnet *un = ifp->if_softc;
363 struct cue_softc *sc = usbnet_softc(un);
364 struct ethercom *ec = usbnet_ec(un);
365 struct ether_multi *enm;
366 struct ether_multistep step;
367 uint32_t h, i;
368
369 DPRINTFN(2,("%s: cue_setiff promisc=%d\n",
370 device_xname(un->un_dev), usbnet_ispromisc(un)));
371
372 if (usbnet_ispromisc(un)) {
373 ETHER_LOCK(ec);
374 allmulti:
375 ec->ec_flags |= ETHER_F_ALLMULTI;
376 ETHER_UNLOCK(ec);
377 for (i = 0; i < CUE_MCAST_TABLE_LEN; i++)
378 sc->cue_mctab[i] = 0xFF;
379 cue_mem(un, CUE_CMD_WRITESRAM, CUE_MCAST_TABLE_ADDR,
380 &sc->cue_mctab, CUE_MCAST_TABLE_LEN);
381 return;
382 }
383
384 /* first, zot all the existing hash bits */
385 for (i = 0; i < CUE_MCAST_TABLE_LEN; i++)
386 sc->cue_mctab[i] = 0;
387
388 /* now program new ones */
389 ETHER_LOCK(ec);
390 ETHER_FIRST_MULTI(step, ec, enm);
391 while (enm != NULL) {
392 if (memcmp(enm->enm_addrlo,
393 enm->enm_addrhi, ETHER_ADDR_LEN) != 0) {
394 goto allmulti;
395 }
396
397 h = cue_crc(enm->enm_addrlo);
398 sc->cue_mctab[h >> 3] |= 1 << (h & 0x7);
399 ETHER_NEXT_MULTI(step, enm);
400 }
401 ec->ec_flags &= ~ETHER_F_ALLMULTI;
402 ETHER_UNLOCK(ec);
403
404 /*
405 * Also include the broadcast address in the filter
406 * so we can receive broadcast frames.
407 */
408 h = cue_crc(etherbroadcastaddr);
409 sc->cue_mctab[h >> 3] |= 1 << (h & 0x7);
410
411 cue_mem(un, CUE_CMD_WRITESRAM, CUE_MCAST_TABLE_ADDR,
412 &sc->cue_mctab, CUE_MCAST_TABLE_LEN);
413 }
414
415 static void
cue_reset(struct usbnet * un)416 cue_reset(struct usbnet *un)
417 {
418 usb_device_request_t req;
419 usbd_status err;
420
421 DPRINTFN(2,("%s: cue_reset\n", device_xname(un->un_dev)));
422
423 if (usbnet_isdying(un))
424 return;
425
426 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
427 req.bRequest = CUE_CMD_RESET;
428 USETW(req.wValue, 0);
429 USETW(req.wIndex, 0);
430 USETW(req.wLength, 0);
431
432 err = usbd_do_request(un->un_udev, &req, NULL);
433
434 if (err)
435 printf("%s: reset failed\n", device_xname(un->un_dev));
436
437 /* Wait a little while for the chip to get its brains in order. */
438 usbd_delay_ms(un->un_udev, 1);
439 }
440
441 /*
442 * Probe for a CATC chip.
443 */
444 static int
cue_match(device_t parent,cfdata_t match,void * aux)445 cue_match(device_t parent, cfdata_t match, void *aux)
446 {
447 struct usb_attach_arg *uaa = aux;
448
449 return cue_lookup(uaa->uaa_vendor, uaa->uaa_product) != NULL ?
450 UMATCH_VENDOR_PRODUCT : UMATCH_NONE;
451 }
452
453 /*
454 * Attach the interface. Allocate softc structures, do ifmedia
455 * setup and ethernet/BPF attach.
456 */
457 static void
cue_attach(device_t parent,device_t self,void * aux)458 cue_attach(device_t parent, device_t self, void *aux)
459 {
460 struct cue_softc *sc = device_private(self);
461 struct usbnet * const un = &sc->cue_un;
462 struct usb_attach_arg *uaa = aux;
463 char *devinfop;
464 struct usbd_device * dev = uaa->uaa_device;
465 usbd_status err;
466 usb_interface_descriptor_t *id;
467 usb_endpoint_descriptor_t *ed;
468 int i;
469
470 KASSERT((void *)sc == un);
471
472 DPRINTFN(5,(" : cue_attach: sc=%p, dev=%p", sc, dev));
473
474 aprint_naive("\n");
475 aprint_normal("\n");
476 devinfop = usbd_devinfo_alloc(dev, 0);
477 aprint_normal_dev(self, "%s\n", devinfop);
478 usbd_devinfo_free(devinfop);
479
480 err = usbd_set_config_no(dev, CUE_CONFIG_NO, 1);
481 if (err) {
482 aprint_error_dev(self, "failed to set configuration"
483 ", err=%s\n", usbd_errstr(err));
484 return;
485 }
486
487 un->un_dev = self;
488 un->un_udev = dev;
489 un->un_sc = sc;
490 un->un_ops = &cue_ops;
491 un->un_rx_xfer_flags = USBD_SHORT_XFER_OK;
492 un->un_tx_xfer_flags = USBD_FORCE_SHORT_XFER;
493 un->un_rx_list_cnt = CUE_RX_LIST_CNT;
494 un->un_tx_list_cnt = CUE_TX_LIST_CNT;
495 un->un_rx_bufsz = CUE_BUFSZ;
496 un->un_tx_bufsz = CUE_BUFSZ;
497
498 err = usbd_device2interface_handle(dev, CUE_IFACE_IDX, &un->un_iface);
499 if (err) {
500 aprint_error_dev(self, "getting interface handle failed\n");
501 return;
502 }
503
504 id = usbd_get_interface_descriptor(un->un_iface);
505
506 /* Find endpoints. */
507 for (i = 0; i < id->bNumEndpoints; i++) {
508 ed = usbd_interface2endpoint_descriptor(un->un_iface, i);
509 if (ed == NULL) {
510 aprint_error_dev(self, "couldn't get ep %d\n", i);
511 return;
512 }
513 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
514 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
515 un->un_ed[USBNET_ENDPT_RX] = ed->bEndpointAddress;
516 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
517 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
518 un->un_ed[USBNET_ENDPT_TX] = ed->bEndpointAddress;
519 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
520 UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
521 un->un_ed[USBNET_ENDPT_INTR] = ed->bEndpointAddress;
522 }
523 }
524
525 /* First level attach. */
526 usbnet_attach(un);
527
528 #if 0
529 /* Reset the adapter. */
530 cue_reset(un);
531 #endif
532 /*
533 * Get station address.
534 */
535 cue_getmac(un);
536
537 usbnet_attach_ifp(un, IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST,
538 0, NULL);
539 }
540
541 static void
cue_uno_tick(struct usbnet * un)542 cue_uno_tick(struct usbnet *un)
543 {
544 struct ifnet *ifp = usbnet_ifp(un);
545
546 net_stat_ref_t nsr = IF_STAT_GETREF(ifp);
547 if (cue_csr_read_2(un, CUE_RX_FRAMEERR))
548 if_statinc_ref(nsr, if_ierrors);
549
550 if_statadd_ref(nsr, if_collisions,
551 cue_csr_read_2(un, CUE_TX_SINGLECOLL));
552 if_statadd_ref(nsr, if_collisions,
553 cue_csr_read_2(un, CUE_TX_MULTICOLL));
554 if_statadd_ref(nsr, if_collisions,
555 cue_csr_read_2(un, CUE_TX_EXCESSCOLL));
556 IF_STAT_PUTREF(ifp);
557 }
558
559 static void
cue_uno_rx_loop(struct usbnet * un,struct usbnet_chain * c,uint32_t total_len)560 cue_uno_rx_loop(struct usbnet *un, struct usbnet_chain *c, uint32_t total_len)
561 {
562 struct ifnet *ifp = usbnet_ifp(un);
563 uint8_t *buf = c->unc_buf;
564 uint16_t len;
565
566 DPRINTFN(5,("%s: %s: total_len=%d len=%d\n",
567 device_xname(un->un_dev), __func__,
568 total_len, le16dec(buf)));
569
570 len = UGETW(buf);
571 if (total_len < 2 ||
572 len > total_len - 2 ||
573 len < sizeof(struct ether_header)) {
574 if_statinc(ifp, if_ierrors);
575 return;
576 }
577
578 /* No errors; receive the packet. */
579 usbnet_enqueue(un, buf + 2, len, 0, 0, 0);
580 }
581
582 static unsigned
cue_uno_tx_prepare(struct usbnet * un,struct mbuf * m,struct usbnet_chain * c)583 cue_uno_tx_prepare(struct usbnet *un, struct mbuf *m, struct usbnet_chain *c)
584 {
585 unsigned total_len;
586
587 DPRINTFN(5,("%s: %s: mbuf len=%d\n",
588 device_xname(un->un_dev), __func__,
589 m->m_pkthdr.len));
590
591 if ((unsigned)m->m_pkthdr.len > un->un_tx_bufsz - 2)
592 return 0;
593
594 /*
595 * Copy the mbuf data into a contiguous buffer, leaving two
596 * bytes at the beginning to hold the frame length.
597 */
598 m_copydata(m, 0, m->m_pkthdr.len, c->unc_buf + 2);
599
600 total_len = m->m_pkthdr.len + 2;
601
602 /* The first two bytes are the frame length */
603 c->unc_buf[0] = (uint8_t)m->m_pkthdr.len;
604 c->unc_buf[1] = (uint8_t)(m->m_pkthdr.len >> 8);
605
606 return total_len;
607 }
608
609 static int
cue_uno_init(struct ifnet * ifp)610 cue_uno_init(struct ifnet *ifp)
611 {
612 struct usbnet * const un = ifp->if_softc;
613 int i, ctl;
614 const u_char *eaddr;
615
616 DPRINTFN(10,("%s: %s: enter\n", device_xname(un->un_dev),__func__));
617
618 /* Cancel pending I/O */
619 cue_uno_stop(ifp, 1);
620
621 /* Reset the interface. */
622 #if 1
623 cue_reset(un);
624 #endif
625
626 /* Set advanced operation modes. */
627 cue_csr_write_1(un, CUE_ADVANCED_OPMODES,
628 CUE_AOP_EMBED_RXLEN | 0x03); /* 1 wait state */
629
630 eaddr = CLLADDR(ifp->if_sadl);
631 /* Set MAC address */
632 for (i = 0; i < ETHER_ADDR_LEN; i++)
633 cue_csr_write_1(un, CUE_PAR0 - i, eaddr[i]);
634
635 /* Enable RX logic. */
636 ctl = CUE_ETHCTL_RX_ON | CUE_ETHCTL_MCAST_ON;
637 if (usbnet_ispromisc(un))
638 ctl |= CUE_ETHCTL_PROMISC;
639 cue_csr_write_1(un, CUE_ETHCTL, ctl);
640
641 /*
642 * Set the number of RX and TX buffers that we want
643 * to reserve inside the ASIC.
644 */
645 cue_csr_write_1(un, CUE_RX_BUFPKTS, CUE_RX_FRAMES);
646 cue_csr_write_1(un, CUE_TX_BUFPKTS, CUE_TX_FRAMES);
647
648 /* Set advanced operation modes. */
649 cue_csr_write_1(un, CUE_ADVANCED_OPMODES,
650 CUE_AOP_EMBED_RXLEN | 0x01); /* 1 wait state */
651
652 /* Program the LED operation. */
653 cue_csr_write_1(un, CUE_LEDCTL, CUE_LEDCTL_FOLLOW_LINK);
654
655 return 0;
656 }
657
658 /* Stop and reset the adapter. */
659 static void
cue_uno_stop(struct ifnet * ifp,int disable)660 cue_uno_stop(struct ifnet *ifp, int disable)
661 {
662 struct usbnet * const un = ifp->if_softc;
663
664 DPRINTFN(10,("%s: %s: enter\n", device_xname(un->un_dev), __func__));
665
666 cue_csr_write_1(un, CUE_ETHCTL, 0);
667 cue_reset(un);
668 }
669
670 #ifdef _MODULE
671 #include "ioconf.c"
672 #endif
673
674 USBNET_MODULE(cue)
675