xref: /linux/arch/parisc/include/asm/ropes.h (revision c1ebb940)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _ASM_PARISC_ROPES_H_
3 #define _ASM_PARISC_ROPES_H_
4 
5 #include <asm/parisc-device.h>
6 
7 #ifdef CONFIG_64BIT
8 /* "low end" PA8800 machines use ZX1 chipset: PAT PDC and only run 64-bit */
9 #define ZX1_SUPPORT
10 #endif
11 
12 #ifdef CONFIG_PROC_FS
13 /* depends on proc fs support. But costs CPU performance */
14 #undef SBA_COLLECT_STATS
15 #endif
16 
17 /*
18 ** The number of pdir entries to "free" before issuing
19 ** a read to PCOM register to flush out PCOM writes.
20 ** Interacts with allocation granularity (ie 4 or 8 entries
21 ** allocated and free'd/purged at a time might make this
22 ** less interesting).
23 */
24 #define DELAYED_RESOURCE_CNT	16
25 
26 #define MAX_IOC		2	/* per Ike. Pluto/Astro only have 1. */
27 #define ROPES_PER_IOC	8	/* per Ike half or Pluto/Astro */
28 
29 struct ioc {
30 	void __iomem	*ioc_hpa;	/* I/O MMU base address */
31 	char		*res_map;	/* resource map, bit == pdir entry */
32 	__le64		*pdir_base;	/* physical base address */
33 	unsigned long	ibase;		/* pdir IOV Space base - shared w/lba_pci */
34 	unsigned long	imask;		/* pdir IOV Space mask - shared w/lba_pci */
35 #ifdef ZX1_SUPPORT
36 	unsigned long	iovp_mask;	/* help convert IOVA to IOVP */
37 #endif
38 	unsigned long	*res_hint;	/* next avail IOVP - circular search */
39 	spinlock_t	res_lock;
40 	unsigned int	res_bitshift;	/* from the LEFT! */
41 	unsigned int	res_size;	/* size of resource map in bytes */
42 #ifdef SBA_HINT_SUPPORT
43 /* FIXME : DMA HINTs not used */
44 	unsigned long	hint_mask_pdir; /* bits used for DMA hints */
45 	unsigned int	hint_shift_pdir;
46 #endif
47 #if DELAYED_RESOURCE_CNT > 0
48 	int		saved_cnt;
49 	struct sba_dma_pair {
50 			dma_addr_t	iova;
51 			size_t		size;
52         } saved[DELAYED_RESOURCE_CNT];
53 #endif
54 
55 #ifdef SBA_COLLECT_STATS
56 #define SBA_SEARCH_SAMPLE	0x100
57 	unsigned long	avg_search[SBA_SEARCH_SAMPLE];
58 	unsigned long	avg_idx;	/* current index into avg_search */
59 	unsigned long	used_pages;
60 	unsigned long	msingle_calls;
61 	unsigned long	msingle_pages;
62 	unsigned long	msg_calls;
63 	unsigned long	msg_pages;
64 	unsigned long	usingle_calls;
65 	unsigned long	usingle_pages;
66 	unsigned long	usg_calls;
67 	unsigned long	usg_pages;
68 #endif
69         /* STUFF We don't need in performance path */
70 	unsigned int	pdir_size;	/* in bytes, determined by IOV Space size */
71 };
72 
73 struct sba_device {
74 	struct sba_device	*next;  /* list of SBA's in system */
75 	struct parisc_device	*dev;   /* dev found in bus walk */
76 	const char		*name;
77 	void __iomem		*sba_hpa; /* base address */
78 	spinlock_t		sba_lock;
79 	unsigned int		flags;  /* state/functionality enabled */
80 	unsigned int		hw_rev;  /* HW revision of chip */
81 
82 	struct resource		chip_resv; /* MMIO reserved for chip */
83 	struct resource		iommu_resv; /* MMIO reserved for iommu */
84 
85 	unsigned int		num_ioc;  /* number of on-board IOC's */
86 	struct ioc		ioc[MAX_IOC];
87 };
88 
89 /* list of SBA's in system, see drivers/parisc/sba_iommu.c */
90 extern struct sba_device *sba_list;
91 
92 #define ASTRO_RUNWAY_PORT	0x582
93 #define IKE_MERCED_PORT		0x803
94 #define REO_MERCED_PORT		0x804
95 #define REOG_MERCED_PORT	0x805
96 #define PLUTO_MCKINLEY_PORT	0x880
97 
IS_ASTRO(struct parisc_device * d)98 static inline int IS_ASTRO(struct parisc_device *d) {
99 	return d->id.hversion == ASTRO_RUNWAY_PORT;
100 }
101 
IS_IKE(struct parisc_device * d)102 static inline int IS_IKE(struct parisc_device *d) {
103 	return d->id.hversion == IKE_MERCED_PORT;
104 }
105 
IS_PLUTO(struct parisc_device * d)106 static inline int IS_PLUTO(struct parisc_device *d) {
107 	return d->id.hversion == PLUTO_MCKINLEY_PORT;
108 }
109 
110 #define PLUTO_IOVA_BASE	(1UL*1024*1024*1024)	/* 1GB */
111 #define PLUTO_IOVA_SIZE	(1UL*1024*1024*1024)	/* 1GB */
112 #define PLUTO_GART_SIZE	(PLUTO_IOVA_SIZE / 2)
113 
114 #define SBA_PDIR_VALID_BIT	0x8000000000000000ULL
115 
116 #define SBA_AGPGART_COOKIE	(__force __le64) 0x0000badbadc0ffeeULL
117 
118 #define SBA_FUNC_ID	0x0000	/* function id */
119 #define SBA_FCLASS	0x0008	/* function class, bist, header, rev... */
120 
121 #define SBA_FUNC_SIZE 4096   /* SBA configuration function reg set */
122 
123 #define ASTRO_IOC_OFFSET	(32 * SBA_FUNC_SIZE)
124 #define PLUTO_IOC_OFFSET	(1 * SBA_FUNC_SIZE)
125 /* Ike's IOC's occupy functions 2 and 3 */
126 #define IKE_IOC_OFFSET(p)	((p+2) * SBA_FUNC_SIZE)
127 
128 #define IOC_CTRL          0x8	/* IOC_CTRL offset */
129 #define IOC_CTRL_TC       (1 << 0) /* TOC Enable */
130 #define IOC_CTRL_CE       (1 << 1) /* Coalesce Enable */
131 #define IOC_CTRL_DE       (1 << 2) /* Dillon Enable */
132 #define IOC_CTRL_RM       (1 << 8) /* Real Mode */
133 #define IOC_CTRL_NC       (1 << 9) /* Non Coherent Mode */
134 #define IOC_CTRL_D4       (1 << 11) /* Disable 4-byte coalescing */
135 #define IOC_CTRL_DD       (1 << 13) /* Disable distr. LMMIO range coalescing */
136 
137 /*
138 ** Offsets into MBIB (Function 0 on Ike and hopefully Astro)
139 ** Firmware programs this stuff. Don't touch it.
140 */
141 #define LMMIO_DIRECT0_BASE  0x300
142 #define LMMIO_DIRECT0_MASK  0x308
143 #define LMMIO_DIRECT0_ROUTE 0x310
144 
145 #define LMMIO_DIST_BASE  0x360
146 #define LMMIO_DIST_MASK  0x368
147 #define LMMIO_DIST_ROUTE 0x370
148 
149 #define IOS_DIST_BASE	0x390
150 #define IOS_DIST_MASK	0x398
151 #define IOS_DIST_ROUTE	0x3A0
152 
153 #define IOS_DIRECT_BASE	0x3C0
154 #define IOS_DIRECT_MASK	0x3C8
155 #define IOS_DIRECT_ROUTE 0x3D0
156 
157 /*
158 ** Offsets into I/O TLB (Function 2 and 3 on Ike)
159 */
160 #define ROPE0_CTL	0x200  /* "regbus pci0" */
161 #define ROPE1_CTL	0x208
162 #define ROPE2_CTL	0x210
163 #define ROPE3_CTL	0x218
164 #define ROPE4_CTL	0x220
165 #define ROPE5_CTL	0x228
166 #define ROPE6_CTL	0x230
167 #define ROPE7_CTL	0x238
168 
169 #define IOC_ROPE0_CFG	0x500	/* pluto only */
170 #define   IOC_ROPE_AO	  0x10	/* Allow "Relaxed Ordering" */
171 
172 #define HF_ENABLE	0x40
173 
174 #define IOC_IBASE	0x300	/* IO TLB */
175 #define IOC_IMASK	0x308
176 #define IOC_PCOM	0x310
177 #define IOC_TCNFG	0x318
178 #define IOC_PDIR_BASE	0x320
179 
180 /*
181 ** IOC supports 4/8/16/64KB page sizes (see TCNFG register)
182 ** It's safer (avoid memory corruption) to keep DMA page mappings
183 ** equivalently sized to VM PAGE_SIZE.
184 **
185 ** We really can't avoid generating a new mapping for each
186 ** page since the Virtual Coherence Index has to be generated
187 ** and updated for each page.
188 **
189 ** PAGE_SIZE could be greater than IOVP_SIZE. But not the inverse.
190 */
191 #define IOVP_SIZE	PAGE_SIZE
192 #define IOVP_SHIFT	PAGE_SHIFT
193 #define IOVP_MASK	PAGE_MASK
194 
195 #define SBA_PERF_CFG	0x708	/* Performance Counter stuff */
196 #define SBA_PERF_MASK1	0x718
197 #define SBA_PERF_MASK2	0x730
198 
199 /*
200 ** Offsets into PCI Performance Counters (functions 12 and 13)
201 ** Controlled by PERF registers in function 2 & 3 respectively.
202 */
203 #define SBA_PERF_CNT1	0x200
204 #define SBA_PERF_CNT2	0x208
205 #define SBA_PERF_CNT3	0x210
206 
207 /*
208 ** lba_device: Per instance Elroy data structure
209 */
210 struct lba_device {
211 	struct pci_hba_data	hba;
212 
213 	spinlock_t		lba_lock;
214 	void			*iosapic_obj;
215 
216 #ifdef CONFIG_64BIT
217 	void __iomem		*iop_base;	/* PA_VIEW - for IO port accessor funcs */
218 #endif
219 
220 	int			flags;		/* state/functionality enabled */
221 	int			hw_rev;		/* HW revision of chip */
222 };
223 
224 #define ELROY_HVERS		0x782
225 #define MERCURY_HVERS		0x783
226 #define QUICKSILVER_HVERS	0x784
227 
IS_ELROY(struct parisc_device * d)228 static inline int IS_ELROY(struct parisc_device *d) {
229 	return (d->id.hversion == ELROY_HVERS);
230 }
231 
IS_MERCURY(struct parisc_device * d)232 static inline int IS_MERCURY(struct parisc_device *d) {
233 	return (d->id.hversion == MERCURY_HVERS);
234 }
235 
IS_QUICKSILVER(struct parisc_device * d)236 static inline int IS_QUICKSILVER(struct parisc_device *d) {
237 	return (d->id.hversion == QUICKSILVER_HVERS);
238 }
239 
agp_mode_mercury(void __iomem * hpa)240 static inline int agp_mode_mercury(void __iomem *hpa) {
241 	u64 bus_mode;
242 
243 	bus_mode = readl(hpa + 0x0620);
244 	if (bus_mode & 1)
245 		return 1;
246 
247 	return 0;
248 }
249 
250 /*
251 ** I/O SAPIC init function
252 ** Caller knows where an I/O SAPIC is. LBA has an integrated I/O SAPIC.
253 ** Call setup as part of per instance initialization.
254 ** (ie *not* init_module() function unless only one is present.)
255 ** fixup_irq is to initialize PCI IRQ line support and
256 ** virtualize pcidev->irq value. To be called by pci_fixup_bus().
257 */
258 extern void *iosapic_register(unsigned long hpa, void __iomem *vaddr);
259 extern int iosapic_fixup_irq(void *obj, struct pci_dev *pcidev);
260 
261 #define LBA_FUNC_ID	0x0000	/* function id */
262 #define LBA_FCLASS	0x0008	/* function class, bist, header, rev... */
263 #define LBA_CAPABLE	0x0030	/* capabilities register */
264 
265 #define LBA_PCI_CFG_ADDR	0x0040	/* poke CFG address here */
266 #define LBA_PCI_CFG_DATA	0x0048	/* read or write data here */
267 
268 #define LBA_PMC_MTLT	0x0050	/* Firmware sets this - read only. */
269 #define LBA_FW_SCRATCH	0x0058	/* Firmware writes the PCI bus number here. */
270 #define LBA_ERROR_ADDR	0x0070	/* On error, address gets logged here */
271 
272 #define LBA_ARB_MASK	0x0080	/* bit 0 enable arbitration. PAT/PDC enables */
273 #define LBA_ARB_PRI	0x0088	/* firmware sets this. */
274 #define LBA_ARB_MODE	0x0090	/* firmware sets this. */
275 #define LBA_ARB_MTLT	0x0098	/* firmware sets this. */
276 
277 #define LBA_MOD_ID	0x0100	/* Module ID. PDC_PAT_CELL reports 4 */
278 
279 #define LBA_STAT_CTL	0x0108	/* Status & Control */
280 #define   LBA_BUS_RESET		0x01	/*  Deassert PCI Bus Reset Signal */
281 #define   CLEAR_ERRLOG		0x10	/*  "Clear Error Log" cmd */
282 #define   CLEAR_ERRLOG_ENABLE	0x20	/*  "Clear Error Log" Enable */
283 #define   HF_ENABLE	0x40	/*    enable HF mode (default is -1 mode) */
284 
285 #define LBA_LMMIO_BASE	0x0200	/* < 4GB I/O address range */
286 #define LBA_LMMIO_MASK	0x0208
287 
288 #define LBA_GMMIO_BASE	0x0210	/* > 4GB I/O address range */
289 #define LBA_GMMIO_MASK	0x0218
290 
291 #define LBA_WLMMIO_BASE	0x0220	/* All < 4GB ranges under the same *SBA* */
292 #define LBA_WLMMIO_MASK	0x0228
293 
294 #define LBA_WGMMIO_BASE	0x0230	/* All > 4GB ranges under the same *SBA* */
295 #define LBA_WGMMIO_MASK	0x0238
296 
297 #define LBA_IOS_BASE	0x0240	/* I/O port space for this LBA */
298 #define LBA_IOS_MASK	0x0248
299 
300 #define LBA_ELMMIO_BASE	0x0250	/* Extra LMMIO range */
301 #define LBA_ELMMIO_MASK	0x0258
302 
303 #define LBA_EIOS_BASE	0x0260	/* Extra I/O port space */
304 #define LBA_EIOS_MASK	0x0268
305 
306 #define LBA_GLOBAL_MASK	0x0270	/* Mercury only: Global Address Mask */
307 #define LBA_DMA_CTL	0x0278	/* firmware sets this */
308 
309 #define LBA_IBASE	0x0300	/* SBA DMA support */
310 #define LBA_IMASK	0x0308
311 
312 /* FIXME: ignore DMA Hint stuff until we can measure performance */
313 #define LBA_HINT_CFG	0x0310
314 #define LBA_HINT_BASE	0x0380	/* 14 registers at every 8 bytes. */
315 
316 #define LBA_BUS_MODE	0x0620
317 
318 /* ERROR regs are needed for config cycle kluges */
319 #define LBA_ERROR_CONFIG 0x0680
320 #define     LBA_SMART_MODE 0x20
321 #define LBA_ERROR_STATUS 0x0688
322 #define LBA_ROPE_CTL     0x06A0
323 
324 #define LBA_IOSAPIC_BASE	0x800 /* Offset of IRQ logic */
325 
326 #endif /*_ASM_PARISC_ROPES_H_*/
327