1 /* $NetBSD: nhpibreg.h,v 1.7 2005/12/11 12:17:14 christos Exp $ */ 2 3 /* 4 * Copyright (c) 1982, 1990, 1993 5 * The Regents of the University of California. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. Neither the name of the University nor the names of its contributors 16 * may be used to endorse or promote products derived from this software 17 * without specific prior written permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29 * SUCH DAMAGE. 30 * 31 * @(#)nhpibreg.h 8.1 (Berkeley) 6/10/93 32 */ 33 34 #include <hp300/dev/iotypes.h> /* XXX */ 35 36 struct nhpibdevice { 37 u_char hpib_pad0; 38 vu_char hpib_cid; 39 u_char hpib_pad1; 40 #define hpib_ie hpib_ids 41 vu_char hpib_ids; 42 u_char hpib_pad2; 43 vu_char hpib_csa; 44 u_char hpib_pad3[11]; 45 #define hpib_mim hpib_mis 46 vu_char hpib_mis; 47 u_char hpib_pad4; 48 #define hpib_lim hpib_lis 49 vu_char hpib_lis; 50 u_char hpib_pad5; 51 vu_char hpib_is; 52 u_char hpib_pad6; 53 #define hpib_acr hpib_cls 54 vu_char hpib_cls; 55 u_char hpib_pad7; 56 vu_char hpib_ar; 57 u_char hpib_pad8; 58 vu_char hpib_sprb; 59 u_char hpib_pad9; 60 #define hpib_ppr hpib_cpt 61 vu_char hpib_cpt; 62 u_char hpib_pad10; 63 vu_char hpib_data; 64 }; 65 66 /* 67 * Bits in hpib_lis (and hpib_lim). 68 */ 69 #define LIS_IFC 0x01 70 #define LIS_SRQ 0x02 71 #define LIS_MA 0x04 72 #define LIS_DCAS 0x08 73 #define LIS_APT 0x10 74 #define LIS_UCG 0x20 75 #define LIS_ERR 0x40 76 #define LIS_GET 0x80 77 78 #define MIS_END 0x08 79 #define MIS_BO 0x10 80 #define MIS_BI 0x20 81 82 #define IS_TADS 0x02 83 #define IS_LADS 0x04 84 85 /* 86 * ti9914 "Auxiliary Commands" - Some are Set/Clear, others pulse. 87 */ 88 #define AUX_CSWRST 0x00 /* End software reset */ 89 #define AUX_RHDF 0x02 /* release RFD (ready for data) holdoff */ 90 #define AUX_CHDFA 0x03 /* Clear holdoff on all data */ 91 #define AUX_CHDFE 0x04 /* Clear holdoff on EOI data only */ 92 #define AUX_EOI 0x08 /* Pulse EOI (with data) */ 93 #define AUX_CLON 0x09 /* Clear listen only */ 94 #define AUX_CTON 0x0a /* Clear talk only */ 95 #define AUX_GTS 0x0b /* Go to standby (clears ATN line) */ 96 #define AUX_TCA 0x0c /* Take control (async) */ 97 #define AUX_TCS 0x0d /* Take control (sync) */ 98 #define AUX_CPP 0x0e /* Clear parallel poll */ 99 #define AUX_CSIC 0x0f /* Clear IFC (interface clear) line */ 100 #define AUX_CSRE 0x10 /* Clear REN (remote enable) line */ 101 #define AUX_CDAI 0x13 /* Clear interrupt disable */ 102 #define AUX_CSTD1 0x15 /* Clear 1200ns T1 delay */ 103 #define AUX_CSHDW 0x16 /* Clear shadow handshake */ 104 #define AUX_CVSTD1 0x17 /* Clear 600ns T1 delay */ 105 106 #define AUX_SSWRST 0x80 /* Start software reset */ 107 #define AUX_SHDFA 0x83 /* Set holdoff on all data */ 108 #define AUX_SHDFE 0x84 /* Set holdoff on EOI data only */ 109 #define AUX_SLON 0x89 /* Set listen only */ 110 #define AUX_STON 0x8a /* Set talk only */ 111 #define AUX_SPP 0x8e /* Set parallel poll */ 112 #define AUX_SSIC 0x8f /* Set IFC line */ 113 #define AUX_SSRE 0x90 /* Set REN line */ 114 #define AUX_SDAI 0x93 /* Disable all interrupts */ 115 #define AUX_SSTD1 0x95 /* Set T1 delay to 1200ns */ 116 #define AUX_SSHDW 0x96 /* Set shadow handshake */ 117 #define AUX_SVSTD1 0x97 /* Set T1 delay to 600ns */ 118