1 /* $NetBSD: if_kuereg.h,v 1.24 2019/08/16 08:51:09 mrg Exp $ */ 2 3 /* 4 * Copyright (c) 1997, 1998, 1999, 2000 5 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Bill Paul. 18 * 4. Neither the name of the author nor the names of any co-contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 32 * THE POSSIBILITY OF SUCH DAMAGE. 33 * 34 * $FreeBSD: src/sys/dev/usb/if_kuereg.h,v 1.2 2000/01/06 07:39:07 wpaul Exp $ 35 */ 36 37 /* 38 * Definitions for the KLSI KL5KUSB101B USB to ethernet controller. 39 * The KLSI part is controlled via vendor control requests, the structure 40 * of which depend a bit on the firmware running on the internal 41 * microcontroller. The one exception is the 'send scan data' command, 42 * which is used to load the firmware. 43 */ 44 45 #include <sys/rndsource.h> 46 47 #define KUE_CONFIG_NO 1 48 #define KUE_IFACE_IDX 0 49 50 #define KUE_CMD_GET_ETHER_DESCRIPTOR 0x00 51 #define KUE_CMD_SET_MCAST_FILTERS 0x01 52 #define KUE_CMD_SET_PKT_FILTER 0x02 53 #define KUE_CMD_GET_ETHERSTATS 0x03 54 #define KUE_CMD_GET_GPIO 0x04 55 #define KUE_CMD_SET_GPIO 0x05 56 #define KUE_CMD_SET_MAC 0x06 57 #define KUE_CMD_GET_MAC 0x07 58 #define KUE_CMD_SET_URB_SIZE 0x08 59 #define KUE_CMD_SET_SOFS 0x09 60 #define KUE_CMD_SET_EVEN_PKTS 0x0A 61 #define KUE_CMD_SEND_SCAN 0xFF 62 63 struct kue_ether_desc { 64 uint8_t kue_len; 65 uint8_t kue_rsvd0; 66 uint8_t kue_rsvd1; 67 uint8_t kue_macaddr[ETHER_ADDR_LEN]; 68 uint8_t kue_etherstats[4]; 69 uint8_t kue_maxseg[2]; 70 uint8_t kue_mcastfilt[2]; 71 uint8_t kue_rsvd2; 72 }; 73 74 #define KUE_ETHERSTATS(x) \ 75 le32dec((x)->kue_desc.kue_etherstats) 76 #define KUE_MAXSEG(x) \ 77 le16dec((x)->kue_desc.kue_maxseg) 78 #define KUE_MCFILTCNT(x) \ 79 (le16dec((x)->kue_desc.kue_mcastfilt) & 0x7FFF) 80 81 #define KUE_STAT_TX_OK 0x00000001 82 #define KUE_STAT_RX_OK 0x00000002 83 #define KUE_STAT_TX_ERR 0x00000004 84 #define KUE_STAT_RX_ERR 0x00000008 85 #define KUE_STAT_RX_NOBUF 0x00000010 86 #define KUE_STAT_TX_UCAST_BYTES 0x00000020 87 #define KUE_STAT_TX_UCAST_FRAMES 0x00000040 88 #define KUE_STAT_TX_MCAST_BYTES 0x00000080 89 #define KUE_STAT_TX_MCAST_FRAMES 0x00000100 90 #define KUE_STAT_TX_BCAST_BYTES 0x00000200 91 #define KUE_STAT_TX_BCAST_FRAMES 0x00000400 92 #define KUE_STAT_RX_UCAST_BYTES 0x00000800 93 #define KUE_STAT_RX_UCAST_FRAMES 0x00001000 94 #define KUE_STAT_RX_MCAST_BYTES 0x00002000 95 #define KUE_STAT_RX_MCAST_FRAMES 0x00004000 96 #define KUE_STAT_RX_BCAST_BYTES 0x00008000 97 #define KUE_STAT_RX_BCAST_FRAMES 0x00010000 98 #define KUE_STAT_RX_CRCERR 0x00020000 99 #define KUE_STAT_TX_QUEUE_LENGTH 0x00040000 100 #define KUE_STAT_RX_ALIGNERR 0x00080000 101 #define KUE_STAT_TX_SINGLECOLL 0x00100000 102 #define KUE_STAT_TX_MULTICOLL 0x00200000 103 #define KUE_STAT_TX_DEFERRED 0x00400000 104 #define KUE_STAT_TX_MAXCOLLS 0x00800000 105 #define KUE_STAT_RX_OVERRUN 0x01000000 106 #define KUE_STAT_TX_UNDERRUN 0x02000000 107 #define KUE_STAT_TX_SQE_ERR 0x04000000 108 #define KUE_STAT_TX_CARRLOSS 0x08000000 109 #define KUE_STAT_RX_LATECOLL 0x10000000 110 111 #define KUE_RXFILT_PROMISC 0x0001 112 #define KUE_RXFILT_ALLMULTI 0x0002 113 #define KUE_RXFILT_UNICAST 0x0004 114 #define KUE_RXFILT_BROADCAST 0x0008 115 #define KUE_RXFILT_MULTICAST 0x0010 116 117 #define KUE_CTL_READ 0x01 118 #define KUE_CTL_WRITE 0x02 119 120 #define KUE_WARM_REV 0x0202 121