xref: /openbsd/usr.sbin/mopd/common/mopdef.h (revision f7f1b834)
1 /*	$OpenBSD: mopdef.h,v 1.6 2017/01/21 08:33:51 krw Exp $ */
2 
3 /*
4  * Copyright (c) 1993-95 Mats O Jansson.  All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25  *
26  *	$OpenBSD: mopdef.h,v 1.6 2017/01/21 08:33:51 krw Exp $
27  *
28  */
29 
30 #ifndef _MOPDEF_H_
31 #define _MOPDEF_H_
32 
33 #define MOP_K_PROTO_DL          0x6001  /* MOP Load/Dump Protocol */
34 #define MOP_K_PROTO_RC          0x6002  /* MOP Remote Console Protocol */
35 #define MOP_K_PROTO_LP          0x9000  /* MOP Loopback Protocol */
36 
37 #define MOP_K_PROTO_802_DL	{ 0x08, 0x00, 0x2b, 0x60, 0x01 }
38 #define MOP_K_PROTO_802_RC	{ 0x08, 0x00, 0x2b, 0x60, 0x02 }
39 #define MOP_K_PROTO_802_LP	{ 0x08, 0x00, 0x2b, 0x90, 0x00 }
40 
41 #define MOP_K_PROTO_802_DSAP	0xaa
42 #define MOP_K_PROTO_802_SSAP	0xaa
43 #define MOP_K_PROTO_802_CNTL	0x03
44 
45 #define TRANS_ETHER		1	/* Packet in Ethernet format */
46 #define TRANS_8023		2	/* Packet in 802.3 format */
47 #define TRANS_AND		0x1000	/* Both Ethernet and 802.3 */
48 
49 /* The following constants are defined in module MOPDEF.SDL in MOM */
50 
51 #define MOP_K_CODE_MIN          0
52 #define MOP_K_CODE_MLT          0       /* Memory Load with transfer address */
53 #define MOP_K_CODE_DCM          1       /* Dump Complete */
54 #define MOP_K_CODE_MLD          2       /* Memory Load */
55 #define MOP_K_CODE_ASV          3       /* Assistance volunteer (NI only */
56 #define MOP_K_CODE_RMD          4       /* Request memory dump */
57 #define MOP_K_CODE_RID          5       /* Request ID */
58 #define MOP_K_CODE_BOT          6       /* Boot */
59 #define MOP_K_CODE_SID          7       /* System ID */
60 #define MOP_K_CODE_RPR          8       /* Request program */
61 #define MOP_K_CODE_RQC          9       /* Request Counters */
62 #define MOP_K_CODE_RML          10      /* Request memory load */
63 #define MOP_K_CODE_CNT          11      /* Counters */
64 #define MOP_K_CODE_RDS          12      /* Request Dump Service */
65 #define MOP_K_CODE_MMR          12      /* MOP Mode Running */
66 #define MOP_K_CODE_RVC          13      /* Reserve Console */
67 #define MOP_K_CODE_MDD          14      /* Memory dump data */
68 #define MOP_K_CODE_RLC          15      /* Release Console */
69 #define MOP_K_CODE_CCP          17      /* Console Command and Poll */
70 #define MOP_K_CODE_CRA          19      /* Console Response and Acknnowledge */
71 #define MOP_K_CODE_PLT          20      /* Parameter load with transfer address*/
72 #define MOP_K_CODE_ALD          24      /* Active loop data */
73 #define MOP_K_CODE_PLD          26      /* Passive looped data */
74 #define MOP_K_CODE_MAX          26
75 
76 #define MOP_K_PGTY_MIN          0
77 #define MOP_K_PGTY_SECLDR       0       /* Secondary Loader */
78 #define MOP_K_PGTY_TERLDR       1       /* Tertiary Loader */
79 #define MOP_K_PGTY_OPRSYS       2       /* Operating System */
80 #define MOP_K_PGTY_MGNTFL       3       /* Management File */
81 #define MOP_K_PGTY_MAX          3
82 
83 #define MOP_K_BPTY_MIN          0
84 #define MOP_K_BPTY_SYS          0       /* System Processor */
85 #define MOP_K_BPTY_COM          1       /* Communication Processor */
86 #define MOP_K_BPTY_MAX          1
87 
88 #define MOP_K_RML_ERROR_MIN     0
89 #define MOP_K_RML_ERROR_NONE    0       /* None */
90 #define MOP_K_RML_ERROR_NO_LOAD 1       /* Image data not properly loaded */
91 #define MOP_K_RML_ERROR_MAX     1
92 
93 #define MOP_K_PLTP_MIN          0
94 #define MOP_K_PLTP_END          0       /* End Mark */
95 #define MOP_K_PLTP_TSN          1       /* Target System Name */
96 #define MOP_K_PLTP_TSA          2       /* Target System Address */
97 #define MOP_K_PLTP_HSN          3       /* Host System Name */
98 #define MOP_K_PLTP_HSA          4       /* Host System Address */
99 #define MOP_K_PLTP_HST          5       /* Host System Time */
100 #define MOP_K_PLTP_MAX          5
101 
102 #define MOP_K_BOT_CNTL_MIN      0
103 #define MOP_K_BOT_CNTL_SERVER   0       /* Boot-Server */
104 #define MOP_K_BOT_CNTL_DEVICE   1       /* Boot-Device */
105 #define MOP_K_BOT_CNTL_MAX      1
106 
107 #define MOP_K_INFO_VER          1       /* Maintenance Version */
108 #define MOP_K_INFO_MFCT         2       /* Maintenance Functions */
109 #define MOP_K_INFO_CNU          3       /* Console User */
110 #define MOP_K_INFO_RTM          4       /* Reservation Timer */
111 #define MOP_K_INFO_CSZ          5       /* Console Command Size */
112 #define MOP_K_INFO_RSZ          6       /* Console Response Size */
113 #define MOP_K_INFO_HWA          7       /* Hardware Address */
114 #define MOP_K_INFO_TIME         8       /* System Time */
115 #define MOP_K_INFO_SOFD         100     /* Communication Device */
116 #define MOP_K_INFO_SFID         200     /* Software ID */
117 #define MOP_K_INFO_PRTY         300     /* System Processor */
118 #define MOP_K_INFO_DLTY         400     /* Data Link Type */
119 #define MOP_K_INFO_DLBSZ        401     /* Data Link Buffer Size */
120 
121 #define MOP_K_DLTY_MIN          1
122 #define MOP_K_DLTY_NI           1       /* Ethernet */
123 #define MOP_K_DLTY_DDCMP        2       /* DDCMP */
124 #define MOP_K_DLTY_LAPB         3       /* LAPB (frame level of X.25) */
125 #define MOP_K_DLTY_MAX          3
126 
127 #define MOP_K_PRTY_MIN          0
128 #define MOP_K_PRTY_11           1       /* PDP-11 (UNIBUS) */
129 #define MOP_K_PRTY_CMSV         2       /* Communication Server */
130 #define MOP_K_PRTY_PRO          3       /* Professional */
131 #define MOP_K_PRTY_SCO          4       /* Scorpio */
132 #define MOP_K_PRTY_AMB          5       /* Amber */
133 #define MOP_K_PRTY_BRI          6       /* XLII Bridge */
134 #define MOP_K_PRTY_MAX          6
135 
136 #define MOP_K_SFID_FORM_MIN     -2
137 #define MOP_K_SFID_FORM_MAINT   -2      /* Maintenance System */
138 #define MOP_K_SFID_FORM_OPRSYS  -1      /* Standard Operating System */
139 #define MOP_K_SFID_FORM_NONE    0       /* None */
140 #define MOP_K_SFID_FORM_MAX     0
141 
142 #define MOP_K_SFID_CUST         'CP'    /* Customer product */
143 #define MOP_K_SFID_DEC          'DP'    /* DEC product */
144 #define MOP_K_SFID_DELIM_ID     '#'     /* Delimiter identifier */
145 
146 #define MOP_K_DLBSZ_DEFAULT     262     /* Buffersize */
147 
148 #define MOP_K_NILOOP_REPLY      1       /* Response */
149 #define MOP_K_NILOOP_FORWARD    2       /* Forward Data */
150 
151 #define MOP_DL_MULTICAST	{ 0xab, 0x00, 0x00, 0x01, 0x00, 0x00 }
152 #define MOP_RC_MULTICAST	{ 0xab, 0x00, 0x00, 0x02, 0x00, 0x00 }
153 #define MOP_LP_MULTICAST	{ 0xcf, 0x00, 0x00, 0x00, 0x00, 0x00 }
154 
155 #define MOP_K_RPR_FORMAT_V3	1	/* Format Version of RPR */
156 #define MOP_K_RPR_FORMAT	4	/* Format Version of RPR */
157 
158 #define IHD_C_MINCODE		-1	/* Low bound of ALIAS value */
159 #define IHD_C_NATIVE		-1	/* Native mode image */
160 #define IHD_C_RSX		0	/* RSX image produced by TKB */
161 #define IHD_C_BPA		1	/* BASIC plus analog */
162 #define IHD_C_ALIAS		2	/* Last 126 bytes contains ASCIC of image to activate */
163 #define IHD_C_CLI		3	/* Image is CLI, run LOGINOUT */
164 #define IHD_C_PMAX		4	/* PMAX system image */
165 #define IHD_C_ALPHA		5	/* ALPHA system image */
166 #define IHD_C_MAXCODE		5	/* High bound of ALIAS value */
167 
168 #define IHD_W_SIZE		0
169 #define IHD_W_ACTIVOFF		2
170 #define IHD_B_HDRBLKCNT		16
171 #define IHD_W_ALIAS		510
172 #define	ISD_W_PAGCNT		2
173 #define ISD_V_VPN		4
174 #define ISD_M_VPN		0x1fffff
175 #define IHA_L_TFRADR1		0
176 #define EISD_L_SECSIZE		12
177 #define EIHD_L_ISDOFF		12
178 #define EIHD_L_HDRBLKCNT	76
179 
180 #define L_BSA			0x08	/* RSX base address */
181 #define L_BLDZ			0x0e	/* RSX image size (* 64) */
182 #define L_BXFR			0xe8	/* RSX transfer address */
183 #define L_BBLK			0xf0	/* RSX header block count */
184 
185 #ifndef MOPDEF_SUPRESS_EXTERN
186 extern u_char dl_mcst[];
187 extern u_char rc_mcst[];
188 extern u_char dl_802_proto[];
189 extern u_char rc_802_proto[];
190 extern u_char lp_802_proto[];
191 #endif /* MOPDEF_SUPRESS_EXTERN */
192 
193 #endif /* _MOPDEF_H_ */
194