xref: /qemu/tests/qtest/libqos/ahci.c (revision 58045186)
1 /*
2  * libqos AHCI functions
3  *
4  * Copyright (c) 2014 John Snow <jsnow@redhat.com>
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24 
25 #include "qemu/osdep.h"
26 
27 #include "../libqtest.h"
28 #include "ahci.h"
29 #include "pci-pc.h"
30 
31 #include "qemu/host-utils.h"
32 
33 #include "hw/pci/pci_ids.h"
34 #include "hw/pci/pci_regs.h"
35 
36 typedef struct AHCICommandProp {
37     uint8_t  cmd;        /* Command Code */
38     bool     data;       /* Data transfer command? */
39     bool     pio;
40     bool     dma;
41     bool     lba28;
42     bool     lba48;
43     bool     read;
44     bool     write;
45     bool     atapi;
46     bool     ncq;
47     uint64_t size;       /* Static transfer size, for commands like IDENTIFY. */
48     uint32_t interrupts; /* Expected interrupts for this command. */
49 } AHCICommandProp;
50 
51 AHCICommandProp ahci_command_properties[] = {
52     { .cmd = CMD_READ_PIO,       .data = true,  .pio = true,
53                                  .lba28 = true, .read = true },
54     { .cmd = CMD_WRITE_PIO,      .data = true,  .pio = true,
55                                  .lba28 = true, .write = true },
56     { .cmd = CMD_READ_PIO_EXT,   .data = true,  .pio = true,
57                                  .lba48 = true, .read = true },
58     { .cmd = CMD_WRITE_PIO_EXT,  .data = true,  .pio = true,
59                                  .lba48 = true, .write = true },
60     { .cmd = CMD_READ_DMA,       .data = true,  .dma = true,
61                                  .lba28 = true, .read = true },
62     { .cmd = CMD_WRITE_DMA,      .data = true,  .dma = true,
63                                  .lba28 = true, .write = true },
64     { .cmd = CMD_READ_DMA_EXT,   .data = true,  .dma = true,
65                                  .lba48 = true, .read = true },
66     { .cmd = CMD_WRITE_DMA_EXT,  .data = true,  .dma = true,
67                                  .lba48 = true, .write = true },
68     { .cmd = CMD_IDENTIFY,       .data = true,  .pio = true,
69                                  .size = 512,   .read = true },
70     { .cmd = READ_FPDMA_QUEUED,  .data = true,  .dma = true,
71                                  .lba48 = true, .read = true, .ncq = true },
72     { .cmd = WRITE_FPDMA_QUEUED, .data = true,  .dma = true,
73                                  .lba48 = true, .write = true, .ncq = true },
74     { .cmd = CMD_READ_MAX,       .lba28 = true },
75     { .cmd = CMD_READ_MAX_EXT,   .lba48 = true },
76     { .cmd = CMD_FLUSH_CACHE,    .data = false },
77     { .cmd = CMD_PACKET,         .data = true,  .size = 16,
78                                  .atapi = true, .pio = true },
79     { .cmd = CMD_PACKET_ID,      .data = true,  .pio = true,
80                                  .size = 512,   .read = true }
81 };
82 
83 struct AHCICommand {
84     /* Test Management Data */
85     uint8_t name;
86     uint8_t port;
87     uint8_t slot;
88     uint8_t errors;
89     uint32_t interrupts;
90     uint64_t xbytes;
91     uint32_t prd_size;
92     uint32_t sector_size;
93     uint64_t buffer;
94     AHCICommandProp *props;
95     /* Data to be transferred to the guest */
96     AHCICommandHeader header;
97     RegH2DFIS fis;
98     unsigned char *atapi_cmd;
99 };
100 
101 /**
102  * Allocate space in the guest using information in the AHCIQState object.
103  */
ahci_alloc(AHCIQState * ahci,size_t bytes)104 uint64_t ahci_alloc(AHCIQState *ahci, size_t bytes)
105 {
106     g_assert(ahci);
107     g_assert(ahci->parent);
108     return qmalloc(ahci->parent, bytes);
109 }
110 
ahci_free(AHCIQState * ahci,uint64_t addr)111 void ahci_free(AHCIQState *ahci, uint64_t addr)
112 {
113     g_assert(ahci);
114     g_assert(ahci->parent);
115     qfree(ahci->parent, addr);
116 }
117 
is_atapi(AHCIQState * ahci,uint8_t port)118 bool is_atapi(AHCIQState *ahci, uint8_t port)
119 {
120     return ahci_px_rreg(ahci, port, AHCI_PX_SIG) == AHCI_SIGNATURE_CDROM;
121 }
122 
123 /**
124  * Locate, verify, and return a handle to the AHCI device.
125  */
get_ahci_device(QTestState * qts,uint32_t * fingerprint)126 QPCIDevice *get_ahci_device(QTestState *qts, uint32_t *fingerprint)
127 {
128     QPCIDevice *ahci;
129     uint32_t ahci_fingerprint;
130     QPCIBus *pcibus;
131 
132     pcibus = qpci_new_pc(qts, NULL);
133 
134     /* Find the AHCI PCI device and verify it's the right one. */
135     ahci = qpci_device_find(pcibus, QPCI_DEVFN(0x1F, 0x02));
136     g_assert(ahci != NULL);
137 
138     ahci_fingerprint = qpci_config_readl(ahci, PCI_VENDOR_ID);
139 
140     switch (ahci_fingerprint) {
141     case AHCI_INTEL_ICH9:
142         break;
143     default:
144         /* Unknown device. */
145         g_assert_not_reached();
146     }
147 
148     if (fingerprint) {
149         *fingerprint = ahci_fingerprint;
150     }
151     return ahci;
152 }
153 
free_ahci_device(QPCIDevice * dev)154 void free_ahci_device(QPCIDevice *dev)
155 {
156     QPCIBus *pcibus = dev ? dev->bus : NULL;
157 
158     /* libqos doesn't have a function for this, so free it manually */
159     g_free(dev);
160     qpci_free_pc(pcibus);
161 }
162 
163 /* Free all memory in-use by the AHCI device. */
ahci_clean_mem(AHCIQState * ahci)164 void ahci_clean_mem(AHCIQState *ahci)
165 {
166     uint8_t port, slot;
167 
168     for (port = 0; port < 32; ++port) {
169         if (ahci->port[port].fb) {
170             ahci_free(ahci, ahci->port[port].fb);
171             ahci->port[port].fb = 0;
172         }
173         if (ahci->port[port].clb) {
174             for (slot = 0; slot < 32; slot++) {
175                 ahci_destroy_command(ahci, port, slot);
176             }
177             ahci_free(ahci, ahci->port[port].clb);
178             ahci->port[port].clb = 0;
179         }
180     }
181 }
182 
183 /*** Logical Device Initialization ***/
184 
185 /**
186  * Start the PCI device and sanity-check default operation.
187  */
ahci_pci_enable(AHCIQState * ahci)188 void ahci_pci_enable(AHCIQState *ahci)
189 {
190     uint8_t reg;
191 
192     start_ahci_device(ahci);
193 
194     switch (ahci->fingerprint) {
195     case AHCI_INTEL_ICH9:
196         /* ICH9 has a register at PCI 0x92 that
197          * acts as a master port enabler mask. */
198         reg = qpci_config_readb(ahci->dev, 0x92);
199         reg |= 0x3F;
200         qpci_config_writeb(ahci->dev, 0x92, reg);
201         /* 0...0111111b -- bit significant, ports 0-5 enabled. */
202         ASSERT_BIT_SET(qpci_config_readb(ahci->dev, 0x92), 0x3F);
203         break;
204     }
205 
206 }
207 
208 /**
209  * Map BAR5/ABAR, and engage the PCI device.
210  */
start_ahci_device(AHCIQState * ahci)211 void start_ahci_device(AHCIQState *ahci)
212 {
213     /* Map AHCI's ABAR (BAR5) */
214     ahci->hba_bar = qpci_iomap(ahci->dev, 5, &ahci->barsize);
215 
216     /* turns on pci.cmd.iose, pci.cmd.mse and pci.cmd.bme */
217     qpci_device_enable(ahci->dev);
218 }
219 
220 /**
221  * Test and initialize the AHCI's HBA memory areas.
222  * Initialize and start any ports with devices attached.
223  * Bring the HBA into the idle state.
224  */
ahci_hba_enable(AHCIQState * ahci)225 void ahci_hba_enable(AHCIQState *ahci)
226 {
227     /* Bits of interest in this section:
228      * GHC.AE     Global Host Control / AHCI Enable
229      * PxCMD.ST   Port Command: Start
230      * PxCMD.SUD  "Spin Up Device"
231      * PxCMD.POD  "Power On Device"
232      * PxCMD.FRE  "FIS Receive Enable"
233      * PxCMD.FR   "FIS Receive Running"
234      * PxCMD.CR   "Command List Running"
235      */
236     uint32_t reg, ports_impl;
237     uint16_t i;
238     uint8_t num_cmd_slots;
239 
240     g_assert(ahci != NULL);
241 
242     /* Set GHC.AE to 1 */
243     ahci_set(ahci, AHCI_GHC, AHCI_GHC_AE);
244     reg = ahci_rreg(ahci, AHCI_GHC);
245     ASSERT_BIT_SET(reg, AHCI_GHC_AE);
246 
247     /* Cache CAP and CAP2. */
248     ahci->cap = ahci_rreg(ahci, AHCI_CAP);
249     ahci->cap2 = ahci_rreg(ahci, AHCI_CAP2);
250 
251     /* Read CAP.NCS, how many command slots do we have? */
252     num_cmd_slots = ((ahci->cap & AHCI_CAP_NCS) >> ctzl(AHCI_CAP_NCS)) + 1;
253     g_test_message("Number of Command Slots: %u", num_cmd_slots);
254 
255     /* Determine which ports are implemented. */
256     ports_impl = ahci_rreg(ahci, AHCI_PI);
257 
258     for (i = 0; ports_impl; ports_impl >>= 1, ++i) {
259         if (!(ports_impl & 0x01)) {
260             continue;
261         }
262 
263         g_test_message("Initializing port %u", i);
264 
265         reg = ahci_px_rreg(ahci, i, AHCI_PX_CMD);
266         if (BITCLR(reg, AHCI_PX_CMD_ST | AHCI_PX_CMD_CR |
267                    AHCI_PX_CMD_FRE | AHCI_PX_CMD_FR)) {
268             g_test_message("port is idle");
269         } else {
270             g_test_message("port needs to be idled");
271             ahci_px_clr(ahci, i, AHCI_PX_CMD,
272                         (AHCI_PX_CMD_ST | AHCI_PX_CMD_FRE));
273             /* The port has 500ms to disengage. */
274             usleep(500000);
275             reg = ahci_px_rreg(ahci, i, AHCI_PX_CMD);
276             ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_CR);
277             ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_FR);
278             g_test_message("port is now idle");
279             /* The spec does allow for possibly needing a PORT RESET
280              * or HBA reset if we fail to idle the port. */
281         }
282 
283         /* Allocate Memory for the Command List Buffer & FIS Buffer */
284         /* PxCLB space ... 0x20 per command, as in 4.2.2 p 36 */
285         ahci->port[i].clb = ahci_alloc(ahci, num_cmd_slots * 0x20);
286         qtest_memset(ahci->parent->qts, ahci->port[i].clb, 0x00,
287                      num_cmd_slots * 0x20);
288         g_test_message("CLB: 0x%08" PRIx64, ahci->port[i].clb);
289         ahci_px_wreg(ahci, i, AHCI_PX_CLB, ahci->port[i].clb);
290         g_assert_cmphex(ahci->port[i].clb, ==,
291                         ahci_px_rreg(ahci, i, AHCI_PX_CLB));
292 
293         /* PxFB space ... 0x100, as in 4.2.1 p 35 */
294         ahci->port[i].fb = ahci_alloc(ahci, 0x100);
295         qtest_memset(ahci->parent->qts, ahci->port[i].fb, 0x00, 0x100);
296         g_test_message("FB: 0x%08" PRIx64, ahci->port[i].fb);
297         ahci_px_wreg(ahci, i, AHCI_PX_FB, ahci->port[i].fb);
298         g_assert_cmphex(ahci->port[i].fb, ==,
299                         ahci_px_rreg(ahci, i, AHCI_PX_FB));
300 
301         /* Clear PxSERR, PxIS, then IS.IPS[x] by writing '1's. */
302         ahci_px_wreg(ahci, i, AHCI_PX_SERR, 0xFFFFFFFF);
303         ahci_px_wreg(ahci, i, AHCI_PX_IS, 0xFFFFFFFF);
304         ahci_wreg(ahci, AHCI_IS, (1 << i));
305 
306         /* Verify Interrupts Cleared */
307         reg = ahci_px_rreg(ahci, i, AHCI_PX_SERR);
308         g_assert_cmphex(reg, ==, 0);
309 
310         reg = ahci_px_rreg(ahci, i, AHCI_PX_IS);
311         g_assert_cmphex(reg, ==, 0);
312 
313         reg = ahci_rreg(ahci, AHCI_IS);
314         ASSERT_BIT_CLEAR(reg, (1 << i));
315 
316         /* Enable All Interrupts: */
317         ahci_px_wreg(ahci, i, AHCI_PX_IE, 0xFFFFFFFF);
318         reg = ahci_px_rreg(ahci, i, AHCI_PX_IE);
319         g_assert_cmphex(reg, ==, ~((uint32_t)AHCI_PX_IE_RESERVED));
320 
321         /* Enable the FIS Receive Engine. */
322         ahci_px_set(ahci, i, AHCI_PX_CMD, AHCI_PX_CMD_FRE);
323         reg = ahci_px_rreg(ahci, i, AHCI_PX_CMD);
324         ASSERT_BIT_SET(reg, AHCI_PX_CMD_FR);
325 
326         /* AHCI 1.3 spec: if !STS.BSY, !STS.DRQ and PxSSTS.DET indicates
327          * physical presence, a device is present and may be started. However,
328          * PxSERR.DIAG.X /may/ need to be cleared a priori. */
329         reg = ahci_px_rreg(ahci, i, AHCI_PX_SERR);
330         if (BITSET(reg, AHCI_PX_SERR_DIAG_X)) {
331             ahci_px_set(ahci, i, AHCI_PX_SERR, AHCI_PX_SERR_DIAG_X);
332         }
333 
334         reg = ahci_px_rreg(ahci, i, AHCI_PX_TFD);
335         if (BITCLR(reg, AHCI_PX_TFD_STS_BSY | AHCI_PX_TFD_STS_DRQ)) {
336             reg = ahci_px_rreg(ahci, i, AHCI_PX_SSTS);
337             if ((reg & AHCI_PX_SSTS_DET) == SSTS_DET_ESTABLISHED) {
338                 /* Device Found: set PxCMD.ST := 1 */
339                 ahci_px_set(ahci, i, AHCI_PX_CMD, AHCI_PX_CMD_ST);
340                 ASSERT_BIT_SET(ahci_px_rreg(ahci, i, AHCI_PX_CMD),
341                                AHCI_PX_CMD_CR);
342                 g_test_message("Started Device %u", i);
343             } else if ((reg & AHCI_PX_SSTS_DET)) {
344                 /* Device present, but in some unknown state. */
345                 g_assert_not_reached();
346             }
347         }
348     }
349 
350     /* Enable GHC.IE */
351     ahci_set(ahci, AHCI_GHC, AHCI_GHC_IE);
352     reg = ahci_rreg(ahci, AHCI_GHC);
353     ASSERT_BIT_SET(reg, AHCI_GHC_IE);
354 
355     ahci->enabled = true;
356     /* TODO: The device should now be idling and waiting for commands.
357      * In the future, a small test-case to inspect the Register D2H FIS
358      * and clear the initial interrupts might be good. */
359 }
360 
361 /**
362  * Pick the first implemented and running port
363  */
ahci_port_select(AHCIQState * ahci)364 unsigned ahci_port_select(AHCIQState *ahci)
365 {
366     uint32_t ports, reg;
367     unsigned i;
368 
369     ports = ahci_rreg(ahci, AHCI_PI);
370     for (i = 0; i < 32; ports >>= 1, ++i) {
371         if (ports == 0) {
372             i = 32;
373         }
374 
375         if (!(ports & 0x01)) {
376             continue;
377         }
378 
379         reg = ahci_px_rreg(ahci, i, AHCI_PX_CMD);
380         if (BITSET(reg, AHCI_PX_CMD_ST)) {
381             break;
382         }
383     }
384     g_assert(i < 32);
385     return i;
386 }
387 
388 /**
389  * Clear a port's interrupts and status information prior to a test.
390  */
ahci_port_clear(AHCIQState * ahci,uint8_t port)391 void ahci_port_clear(AHCIQState *ahci, uint8_t port)
392 {
393     uint32_t reg;
394 
395     /* Clear out this port's interrupts (ignore the init register d2h fis) */
396     reg = ahci_px_rreg(ahci, port, AHCI_PX_IS);
397     ahci_px_wreg(ahci, port, AHCI_PX_IS, reg);
398     g_assert_cmphex(ahci_px_rreg(ahci, port, AHCI_PX_IS), ==, 0);
399 
400     /* Wipe the FIS-Receive Buffer */
401     qtest_memset(ahci->parent->qts, ahci->port[port].fb, 0x00, 0x100);
402 }
403 
404 /**
405  * Check a port for errors.
406  */
ahci_port_check_error(AHCIQState * ahci,AHCICommand * cmd)407 void ahci_port_check_error(AHCIQState *ahci, AHCICommand *cmd)
408 {
409     uint8_t port = cmd->port;
410     uint32_t reg;
411 
412     /* If expecting TF error, ensure that TFES is set. */
413     if (cmd->errors) {
414         reg = ahci_px_rreg(ahci, port, AHCI_PX_IS);
415         ASSERT_BIT_SET(reg, AHCI_PX_IS_TFES);
416     } else {
417         /* The upper 9 bits of the IS register all indicate errors. */
418         reg = ahci_px_rreg(ahci, port, AHCI_PX_IS);
419         reg &= ~cmd->interrupts;
420         reg >>= 23;
421         g_assert_cmphex(reg, ==, 0);
422     }
423 
424     /* The Sata Error Register should be empty, even when expecting TF error. */
425     reg = ahci_px_rreg(ahci, port, AHCI_PX_SERR);
426     g_assert_cmphex(reg, ==, 0);
427 
428     /* If expecting TF error, and TFES was set, perform error recovery
429      * (see AHCI 1.3 section 6.2.2.1) such that we can send new commands. */
430     if (cmd->errors) {
431         /* This will clear PxCI. */
432         ahci_px_clr(ahci, port, AHCI_PX_CMD, AHCI_PX_CMD_ST);
433 
434         /* The port has 500ms to disengage. */
435         usleep(500000);
436         reg = ahci_px_rreg(ahci, port, AHCI_PX_CMD);
437         ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_CR);
438 
439         /* Clear PxIS. */
440         reg = ahci_px_rreg(ahci, port, AHCI_PX_IS);
441         ahci_px_wreg(ahci, port, AHCI_PX_IS, reg);
442 
443         /* Check if we need to perform a COMRESET.
444          * Not implemented right now, as there is no reason why our QEMU model
445          * should need a COMRESET when expecting TF error. */
446         reg = ahci_px_rreg(ahci, port, AHCI_PX_TFD);
447         ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_STS_BSY | AHCI_PX_TFD_STS_DRQ);
448 
449         /* Enable issuing new commands. */
450         ahci_px_set(ahci, port, AHCI_PX_CMD, AHCI_PX_CMD_ST);
451     }
452 
453     /* The TFD also has two error sections. */
454     reg = ahci_px_rreg(ahci, port, AHCI_PX_TFD);
455     if (!cmd->errors) {
456         ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_STS_ERR);
457     } else {
458         ASSERT_BIT_SET(reg, AHCI_PX_TFD_STS_ERR);
459     }
460     ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_ERR & (~cmd->errors << 8));
461     ASSERT_BIT_SET(reg, AHCI_PX_TFD_ERR & (cmd->errors << 8));
462 }
463 
ahci_port_check_interrupts(AHCIQState * ahci,AHCICommand * cmd)464 void ahci_port_check_interrupts(AHCIQState *ahci, AHCICommand *cmd)
465 {
466     uint8_t port = cmd->port;
467     uint32_t reg;
468 
469     /* If we expect errors, error handling in ahci_port_check_error() will
470      * already have cleared PxIS, so in that case this function cannot verify
471      * and clear expected interrupts. */
472     if (cmd->errors) {
473         return;
474     }
475 
476     /* Check for expected interrupts */
477     reg = ahci_px_rreg(ahci, port, AHCI_PX_IS);
478     ASSERT_BIT_SET(reg, cmd->interrupts);
479 
480     /* Clear expected interrupts and assert all interrupts now cleared. */
481     ahci_px_wreg(ahci, port, AHCI_PX_IS, cmd->interrupts);
482     g_assert_cmphex(ahci_px_rreg(ahci, port, AHCI_PX_IS), ==, 0);
483 }
484 
ahci_port_check_nonbusy(AHCIQState * ahci,AHCICommand * cmd)485 void ahci_port_check_nonbusy(AHCIQState *ahci, AHCICommand *cmd)
486 {
487     uint8_t slot = cmd->slot;
488     uint8_t port = cmd->port;
489     uint32_t reg;
490 
491     /* For NCQ command with error PxSACT bit should still be set.
492      * For NCQ command without error, PxSACT bit should be cleared.
493      * For non-NCQ command, PxSACT bit should always be cleared. */
494     reg = ahci_px_rreg(ahci, port, AHCI_PX_SACT);
495     if (cmd->props->ncq && cmd->errors) {
496         ASSERT_BIT_SET(reg, (1 << slot));
497     } else {
498         ASSERT_BIT_CLEAR(reg, (1 << slot));
499     }
500 
501     /* For non-NCQ command with error, PxCI bit should still be set.
502      * For non-NCQ command without error, PxCI bit should be cleared.
503      * For NCQ command without error, PxCI bit should be cleared.
504      * For NCQ command with error, PxCI bit may or may not be cleared. */
505     reg = ahci_px_rreg(ahci, port, AHCI_PX_CI);
506     if (!cmd->props->ncq && cmd->errors) {
507         ASSERT_BIT_SET(reg, (1 << slot));
508     } else if (!cmd->errors) {
509         ASSERT_BIT_CLEAR(reg, (1 << slot));
510     }
511 
512     /* And assert that we are generally not busy. */
513     reg = ahci_px_rreg(ahci, port, AHCI_PX_TFD);
514     ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_STS_BSY);
515     ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_STS_DRQ);
516 }
517 
ahci_port_check_d2h_sanity(AHCIQState * ahci,uint8_t port,uint8_t slot)518 void ahci_port_check_d2h_sanity(AHCIQState *ahci, uint8_t port, uint8_t slot)
519 {
520     RegD2HFIS *d2h = g_malloc0(0x20);
521     uint32_t reg;
522 
523     qtest_memread(ahci->parent->qts, ahci->port[port].fb + 0x40, d2h, 0x20);
524     g_assert_cmphex(d2h->fis_type, ==, 0x34);
525 
526     reg = ahci_px_rreg(ahci, port, AHCI_PX_TFD);
527     g_assert_cmphex((reg & AHCI_PX_TFD_ERR) >> 8, ==, d2h->error);
528     g_assert_cmphex((reg & AHCI_PX_TFD_STS), ==, d2h->status);
529 
530     g_free(d2h);
531 }
532 
ahci_port_check_pio_sanity(AHCIQState * ahci,AHCICommand * cmd)533 void ahci_port_check_pio_sanity(AHCIQState *ahci, AHCICommand *cmd)
534 {
535     PIOSetupFIS *pio = g_malloc0(0x20);
536     uint8_t port = cmd->port;
537 
538     /* We cannot check the Status or E_Status registers, because
539      * the status may have again changed between the PIO Setup FIS
540      * and the conclusion of the command with the D2H Register FIS. */
541     qtest_memread(ahci->parent->qts, ahci->port[port].fb + 0x20, pio, 0x20);
542     g_assert_cmphex(pio->fis_type, ==, 0x5f);
543 
544     /* Data transferred by PIO will either be:
545      * (1) 12 or 16 bytes for an ATAPI command packet (QEMU always uses 12), or
546      * (2) Actual data from the drive.
547      * If we do both, (2) winds up erasing any evidence of (1).
548      */
549     if (cmd->props->atapi && (cmd->xbytes == 0 || cmd->props->dma)) {
550         g_assert(le16_to_cpu(pio->tx_count) == 12 ||
551                  le16_to_cpu(pio->tx_count) == 16);
552     } else {
553         /* The AHCI test suite here does not test any PIO command that specifies
554          * a DRQ block larger than one sector (like 0xC4), so this should always
555          * be one sector or less. */
556         size_t pio_len = ((cmd->xbytes % cmd->sector_size) ?
557                           (cmd->xbytes % cmd->sector_size) : cmd->sector_size);
558         g_assert_cmphex(le16_to_cpu(pio->tx_count), ==, pio_len);
559     }
560     g_free(pio);
561 }
562 
ahci_port_check_cmd_sanity(AHCIQState * ahci,AHCICommand * cmd)563 void ahci_port_check_cmd_sanity(AHCIQState *ahci, AHCICommand *cmd)
564 {
565     AHCICommandHeader cmdh;
566 
567     ahci_get_command_header(ahci, cmd->port, cmd->slot, &cmdh);
568     /* Physical Region Descriptor Byte Count is not required to work for NCQ. */
569     if (!cmd->props->ncq) {
570         g_assert_cmphex(cmd->xbytes, ==, cmdh.prdbc);
571     }
572 }
573 
574 /* Get the command in #slot of port #port. */
ahci_get_command_header(AHCIQState * ahci,uint8_t port,uint8_t slot,AHCICommandHeader * cmd)575 void ahci_get_command_header(AHCIQState *ahci, uint8_t port,
576                              uint8_t slot, AHCICommandHeader *cmd)
577 {
578     uint64_t ba = ahci->port[port].clb;
579     ba += slot * sizeof(AHCICommandHeader);
580     qtest_memread(ahci->parent->qts, ba, cmd, sizeof(AHCICommandHeader));
581 
582     cmd->flags = le16_to_cpu(cmd->flags);
583     cmd->prdtl = le16_to_cpu(cmd->prdtl);
584     cmd->prdbc = le32_to_cpu(cmd->prdbc);
585     cmd->ctba = le64_to_cpu(cmd->ctba);
586 }
587 
588 /* Set the command in #slot of port #port. */
ahci_set_command_header(AHCIQState * ahci,uint8_t port,uint8_t slot,AHCICommandHeader * cmd)589 void ahci_set_command_header(AHCIQState *ahci, uint8_t port,
590                              uint8_t slot, AHCICommandHeader *cmd)
591 {
592     AHCICommandHeader tmp = { .flags = 0 };
593     uint64_t ba = ahci->port[port].clb;
594     ba += slot * sizeof(AHCICommandHeader);
595 
596     tmp.flags = cpu_to_le16(cmd->flags);
597     tmp.prdtl = cpu_to_le16(cmd->prdtl);
598     tmp.prdbc = cpu_to_le32(cmd->prdbc);
599     tmp.ctba = cpu_to_le64(cmd->ctba);
600 
601     qtest_memwrite(ahci->parent->qts, ba, &tmp, sizeof(AHCICommandHeader));
602 }
603 
ahci_destroy_command(AHCIQState * ahci,uint8_t port,uint8_t slot)604 void ahci_destroy_command(AHCIQState *ahci, uint8_t port, uint8_t slot)
605 {
606     AHCICommandHeader cmd;
607 
608     /* Obtain the Nth Command Header */
609     ahci_get_command_header(ahci, port, slot, &cmd);
610     if (cmd.ctba == 0) {
611         /* No address in it, so just return -- it's empty. */
612         goto tidy;
613     }
614 
615     /* Free the Table */
616     ahci_free(ahci, cmd.ctba);
617 
618  tidy:
619     /* NULL the header. */
620     memset(&cmd, 0x00, sizeof(cmd));
621     ahci_set_command_header(ahci, port, slot, &cmd);
622     ahci->port[port].ctba[slot] = 0;
623     ahci->port[port].prdtl[slot] = 0;
624 }
625 
ahci_write_fis(AHCIQState * ahci,AHCICommand * cmd)626 void ahci_write_fis(AHCIQState *ahci, AHCICommand *cmd)
627 {
628     RegH2DFIS tmp = cmd->fis;
629     uint64_t addr = cmd->header.ctba;
630 
631     /* NCQ commands use exclusively 8 bit fields and needs no adjustment.
632      * Only the count field needs to be adjusted for non-NCQ commands.
633      * The auxiliary FIS fields are defined per-command and are not currently
634      * implemented in ahci.o, but may or may not need to be flipped. */
635     if (!cmd->props->ncq) {
636         tmp.count = cpu_to_le16(tmp.count);
637     }
638 
639     qtest_memwrite(ahci->parent->qts, addr, &tmp, sizeof(tmp));
640 }
641 
ahci_pick_cmd(AHCIQState * ahci,uint8_t port)642 unsigned ahci_pick_cmd(AHCIQState *ahci, uint8_t port)
643 {
644     unsigned i;
645     unsigned j;
646     uint32_t reg;
647 
648     reg = ahci_px_rreg(ahci, port, AHCI_PX_CI);
649 
650     /* Pick the least recently used command slot that's available */
651     for (i = 0; i < 32; ++i) {
652         j = ((ahci->port[port].next + i) % 32);
653         if (reg & (1 << j)) {
654             continue;
655         }
656         ahci_destroy_command(ahci, port, j);
657         ahci->port[port].next = (j + 1) % 32;
658         return j;
659     }
660 
661     g_test_message("All command slots were busy.");
662     g_assert_not_reached();
663 }
664 
size_to_prdtl(unsigned bytes,unsigned bytes_per_prd)665 static unsigned size_to_prdtl(unsigned bytes, unsigned bytes_per_prd)
666 {
667     /* Each PRD can describe up to 4MiB */
668     g_assert_cmphex(bytes_per_prd, <=, 4096 * 1024);
669     g_assert_cmphex(bytes_per_prd & 0x01, ==, 0x00);
670     return (bytes + bytes_per_prd - 1) / bytes_per_prd;
671 }
672 
673 const AHCIOpts default_opts = { .size = 0 };
674 
675 /**
676  * ahci_exec: execute a given command on a specific
677  * AHCI port.
678  *
679  * @ahci: The device to send the command to
680  * @port: The port number of the SATA device we wish
681  *        to have execute this command
682  * @op:   The S/ATA command to execute, or if opts.atapi
683  *        is true, the SCSI command code.
684  * @opts: Optional arguments to modify execution behavior.
685  */
ahci_exec(AHCIQState * ahci,uint8_t port,uint8_t op,const AHCIOpts * opts_in)686 void ahci_exec(AHCIQState *ahci, uint8_t port,
687                uint8_t op, const AHCIOpts *opts_in)
688 {
689     AHCICommand *cmd;
690     int rc;
691     AHCIOpts *opts;
692     uint64_t buffer_in;
693 
694     opts = g_memdup2((opts_in == NULL ? &default_opts : opts_in),
695                      sizeof(AHCIOpts));
696 
697     buffer_in = opts->buffer;
698 
699     /* No guest buffer provided, create one. */
700     if (opts->size && !opts->buffer) {
701         opts->buffer = ahci_alloc(ahci, opts->size);
702         g_assert(opts->buffer);
703         qtest_memset(ahci->parent->qts, opts->buffer, 0x00, opts->size);
704     }
705 
706     /* Command creation */
707     if (opts->atapi) {
708         uint16_t bcl = opts->set_bcl ? opts->bcl : ATAPI_SECTOR_SIZE;
709         cmd = ahci_atapi_command_create(op, bcl, opts->atapi_dma);
710     } else {
711         cmd = ahci_command_create(op);
712     }
713     ahci_command_adjust(cmd, opts->lba, opts->buffer,
714                         opts->size, opts->prd_size);
715 
716     if (opts->pre_cb) {
717         rc = opts->pre_cb(ahci, cmd, opts);
718         g_assert_cmpint(rc, ==, 0);
719     }
720 
721     /* Write command to memory and issue it */
722     ahci_command_commit(ahci, cmd, port);
723     ahci_command_issue_async(ahci, cmd);
724     if (opts->error) {
725         qtest_qmp_eventwait(ahci->parent->qts, "STOP");
726     }
727     if (opts->mid_cb) {
728         rc = opts->mid_cb(ahci, cmd, opts);
729         g_assert_cmpint(rc, ==, 0);
730     }
731     if (opts->error) {
732         qtest_qmp_send(ahci->parent->qts, "{'execute':'cont' }");
733         qtest_qmp_eventwait(ahci->parent->qts, "RESUME");
734     }
735 
736     /* Wait for command to complete and verify sanity */
737     ahci_command_wait(ahci, cmd);
738     ahci_command_verify(ahci, cmd);
739     if (opts->post_cb) {
740         rc = opts->post_cb(ahci, cmd, opts);
741         g_assert_cmpint(rc, ==, 0);
742     }
743     ahci_command_free(cmd);
744     if (opts->buffer != buffer_in) {
745         ahci_free(ahci, opts->buffer);
746     }
747     g_free(opts);
748 }
749 
750 /* Issue a command, expecting it to fail and STOP the VM */
ahci_guest_io_halt(AHCIQState * ahci,uint8_t port,uint8_t ide_cmd,uint64_t buffer,size_t bufsize,uint64_t sector)751 AHCICommand *ahci_guest_io_halt(AHCIQState *ahci, uint8_t port,
752                                 uint8_t ide_cmd, uint64_t buffer,
753                                 size_t bufsize, uint64_t sector)
754 {
755     AHCICommand *cmd;
756 
757     cmd = ahci_command_create(ide_cmd);
758     ahci_command_adjust(cmd, sector, buffer, bufsize, 0);
759     ahci_command_commit(ahci, cmd, port);
760     ahci_command_issue_async(ahci, cmd);
761     qtest_qmp_eventwait(ahci->parent->qts, "STOP");
762 
763     return cmd;
764 }
765 
766 /* Resume a previously failed command and verify/finalize */
ahci_guest_io_resume(AHCIQState * ahci,AHCICommand * cmd)767 void ahci_guest_io_resume(AHCIQState *ahci, AHCICommand *cmd)
768 {
769     /* Complete the command */
770     qtest_qmp_send(ahci->parent->qts, "{'execute':'cont' }");
771     qtest_qmp_eventwait(ahci->parent->qts, "RESUME");
772     ahci_command_wait(ahci, cmd);
773     ahci_command_verify(ahci, cmd);
774     ahci_command_free(cmd);
775 }
776 
777 /* Given a guest buffer address, perform an IO operation */
ahci_guest_io(AHCIQState * ahci,uint8_t port,uint8_t ide_cmd,uint64_t buffer,size_t bufsize,uint64_t sector)778 void ahci_guest_io(AHCIQState *ahci, uint8_t port, uint8_t ide_cmd,
779                    uint64_t buffer, size_t bufsize, uint64_t sector)
780 {
781     AHCICommand *cmd;
782     cmd = ahci_command_create(ide_cmd);
783     ahci_command_set_buffer(cmd, buffer);
784     ahci_command_set_size(cmd, bufsize);
785     if (sector) {
786         ahci_command_set_offset(cmd, sector);
787     }
788     ahci_command_commit(ahci, cmd, port);
789     ahci_command_issue(ahci, cmd);
790     ahci_command_verify(ahci, cmd);
791     ahci_command_free(cmd);
792 }
793 
ahci_command_find(uint8_t command_name)794 static AHCICommandProp *ahci_command_find(uint8_t command_name)
795 {
796     int i;
797 
798     for (i = 0; i < ARRAY_SIZE(ahci_command_properties); i++) {
799         if (ahci_command_properties[i].cmd == command_name) {
800             return &ahci_command_properties[i];
801         }
802     }
803 
804     return NULL;
805 }
806 
807 /* Given a HOST buffer, create a buffer address and perform an IO operation. */
ahci_io(AHCIQState * ahci,uint8_t port,uint8_t ide_cmd,void * buffer,size_t bufsize,uint64_t sector)808 void ahci_io(AHCIQState *ahci, uint8_t port, uint8_t ide_cmd,
809              void *buffer, size_t bufsize, uint64_t sector)
810 {
811     uint64_t ptr;
812     AHCICommandProp *props;
813 
814     props = ahci_command_find(ide_cmd);
815     g_assert(props);
816     ptr = ahci_alloc(ahci, bufsize);
817     g_assert(!bufsize || ptr);
818     qtest_memset(ahci->parent->qts, ptr, 0x00, bufsize);
819 
820     if (bufsize && props->write) {
821         qtest_bufwrite(ahci->parent->qts, ptr, buffer, bufsize);
822     }
823 
824     ahci_guest_io(ahci, port, ide_cmd, ptr, bufsize, sector);
825 
826     if (bufsize && props->read) {
827         qtest_bufread(ahci->parent->qts, ptr, buffer, bufsize);
828     }
829 
830     ahci_free(ahci, ptr);
831 }
832 
833 /**
834  * Initializes a basic command header in memory.
835  * We assume that this is for an ATA command using RegH2DFIS.
836  */
command_header_init(AHCICommand * cmd)837 static void command_header_init(AHCICommand *cmd)
838 {
839     AHCICommandHeader *hdr = &cmd->header;
840     AHCICommandProp *props = cmd->props;
841 
842     hdr->flags = 5;             /* RegH2DFIS is 5 DW long. Must be < 32 */
843     hdr->flags |= CMDH_CLR_BSY; /* Clear the BSY bit when done */
844     if (props->write) {
845         hdr->flags |= CMDH_WRITE;
846     }
847     if (props->atapi) {
848         hdr->flags |= CMDH_ATAPI;
849     }
850     /* Other flags: PREFETCH, RESET, and BIST */
851     hdr->prdtl = size_to_prdtl(cmd->xbytes, cmd->prd_size);
852     hdr->prdbc = 0;
853     hdr->ctba = 0;
854 }
855 
command_table_init(AHCICommand * cmd)856 static void command_table_init(AHCICommand *cmd)
857 {
858     RegH2DFIS *fis = &(cmd->fis);
859     uint16_t sect_count = (cmd->xbytes / cmd->sector_size);
860 
861     fis->fis_type = REG_H2D_FIS;
862     fis->flags = REG_H2D_FIS_CMD; /* "Command" bit */
863     fis->command = cmd->name;
864 
865     if (cmd->props->ncq) {
866         NCQFIS *ncqfis = (NCQFIS *)fis;
867         /* NCQ is weird and re-uses FIS frames for unrelated data.
868          * See SATA 3.2, 13.6.4.1 READ FPDMA QUEUED for an example. */
869         ncqfis->sector_low = sect_count & 0xFF;
870         ncqfis->sector_hi = (sect_count >> 8) & 0xFF;
871         ncqfis->device = NCQ_DEVICE_MAGIC;
872         /* Force Unit Access is bit 7 in the device register */
873         ncqfis->tag = 0;  /* bits 3-7 are the NCQ tag */
874         ncqfis->prio = 0; /* bits 6,7 are a prio tag */
875         /* RARC bit is bit 0 of TAG field */
876     } else {
877         fis->feature_low = 0x00;
878         fis->feature_high = 0x00;
879         if (cmd->props->lba28 || cmd->props->lba48) {
880             fis->device = ATA_DEVICE_LBA;
881         }
882         fis->count = (cmd->xbytes / cmd->sector_size);
883     }
884     fis->icc = 0x00;
885     fis->control = 0x00;
886     memset(fis->aux, 0x00, ARRAY_SIZE(fis->aux));
887 }
888 
ahci_command_enable_atapi_dma(AHCICommand * cmd)889 void ahci_command_enable_atapi_dma(AHCICommand *cmd)
890 {
891     RegH2DFIS *fis = &(cmd->fis);
892     g_assert(cmd->props->atapi);
893     fis->feature_low |= 0x01;
894     /* PIO is still used to transfer the ATAPI command */
895     g_assert(cmd->props->pio);
896     cmd->props->dma = true;
897     /* BUG: We expect the DMA Setup interrupt for DMA commands */
898     /* cmd->interrupts |= AHCI_PX_IS_DSS; */
899 }
900 
ahci_command_create(uint8_t command_name)901 AHCICommand *ahci_command_create(uint8_t command_name)
902 {
903     AHCICommandProp *props = ahci_command_find(command_name);
904     AHCICommand *cmd;
905 
906     g_assert(props);
907     cmd = g_new0(AHCICommand, 1);
908     g_assert(!(props->dma && props->pio) || props->atapi);
909     g_assert(!(props->lba28 && props->lba48));
910     g_assert(!(props->read && props->write));
911     g_assert(!props->size || props->data);
912     g_assert(!props->ncq || props->lba48);
913 
914     /* Defaults and book-keeping */
915     cmd->props = g_memdup2(props, sizeof(AHCICommandProp));
916     cmd->name = command_name;
917     cmd->xbytes = props->size;
918     cmd->prd_size = 4096;
919     cmd->buffer = 0xabad1dea;
920     cmd->sector_size = props->atapi ? ATAPI_SECTOR_SIZE : AHCI_SECTOR_SIZE;
921 
922     if (!cmd->props->ncq) {
923         cmd->interrupts = AHCI_PX_IS_DHRS;
924     }
925     /* BUG: We expect the DPS interrupt for data commands */
926     /* cmd->interrupts |= props->data ? AHCI_PX_IS_DPS : 0; */
927     /* BUG: We expect the DMA Setup interrupt for DMA commands */
928     /* cmd->interrupts |= props->dma ? AHCI_PX_IS_DSS : 0; */
929     cmd->interrupts |= props->ncq ? AHCI_PX_IS_SDBS : 0;
930 
931     command_header_init(cmd);
932     command_table_init(cmd);
933 
934     return cmd;
935 }
936 
ahci_atapi_command_create(uint8_t scsi_cmd,uint16_t bcl,bool dma)937 AHCICommand *ahci_atapi_command_create(uint8_t scsi_cmd, uint16_t bcl, bool dma)
938 {
939     AHCICommand *cmd = ahci_command_create(CMD_PACKET);
940     cmd->atapi_cmd = g_malloc0(16);
941     cmd->atapi_cmd[0] = scsi_cmd;
942     stw_le_p(&cmd->fis.lba_lo[1], bcl);
943     if (dma) {
944         ahci_command_enable_atapi_dma(cmd);
945     } else {
946         cmd->interrupts |= bcl ? AHCI_PX_IS_PSS : 0;
947     }
948     return cmd;
949 }
950 
ahci_atapi_test_ready(AHCIQState * ahci,uint8_t port,bool ready,uint8_t expected_sense)951 void ahci_atapi_test_ready(AHCIQState *ahci, uint8_t port,
952                            bool ready, uint8_t expected_sense)
953 {
954     AHCICommand *cmd = ahci_atapi_command_create(CMD_ATAPI_TEST_UNIT_READY, 0, false);
955     ahci_command_set_size(cmd, 0);
956     if (!ready) {
957         cmd->interrupts |= AHCI_PX_IS_TFES;
958         cmd->errors |= expected_sense << 4;
959     }
960     ahci_command_commit(ahci, cmd, port);
961     ahci_command_issue(ahci, cmd);
962     ahci_command_verify(ahci, cmd);
963     ahci_command_free(cmd);
964 }
965 
copy_buffer(AHCIQState * ahci,AHCICommand * cmd,const AHCIOpts * opts)966 static int copy_buffer(AHCIQState *ahci, AHCICommand *cmd,
967                         const AHCIOpts *opts)
968 {
969     unsigned char *rx = opts->opaque;
970     qtest_bufread(ahci->parent->qts, opts->buffer, rx, opts->size);
971     return 0;
972 }
973 
ahci_atapi_get_sense(AHCIQState * ahci,uint8_t port,uint8_t * sense,uint8_t * asc)974 void ahci_atapi_get_sense(AHCIQState *ahci, uint8_t port,
975                           uint8_t *sense, uint8_t *asc)
976 {
977     unsigned char *rx;
978     AHCIOpts opts = {
979         .size = 18,
980         .atapi = true,
981         .post_cb = copy_buffer,
982     };
983     rx = g_malloc(18);
984     opts.opaque = rx;
985 
986     ahci_exec(ahci, port, CMD_ATAPI_REQUEST_SENSE, &opts);
987 
988     *sense = rx[2];
989     *asc = rx[12];
990 
991     g_free(rx);
992 }
993 
ahci_atapi_eject(AHCIQState * ahci,uint8_t port)994 void ahci_atapi_eject(AHCIQState *ahci, uint8_t port)
995 {
996     AHCICommand *cmd = ahci_atapi_command_create(CMD_ATAPI_START_STOP_UNIT, 0, false);
997     ahci_command_set_size(cmd, 0);
998 
999     cmd->atapi_cmd[4] = 0x02; /* loej = true */
1000     ahci_command_commit(ahci, cmd, port);
1001     ahci_command_issue(ahci, cmd);
1002     ahci_command_verify(ahci, cmd);
1003     ahci_command_free(cmd);
1004 }
1005 
ahci_atapi_load(AHCIQState * ahci,uint8_t port)1006 void ahci_atapi_load(AHCIQState *ahci, uint8_t port)
1007 {
1008     AHCICommand *cmd = ahci_atapi_command_create(CMD_ATAPI_START_STOP_UNIT, 0, false);
1009     ahci_command_set_size(cmd, 0);
1010 
1011     cmd->atapi_cmd[4] = 0x03; /* loej,start = true */
1012     ahci_command_commit(ahci, cmd, port);
1013     ahci_command_issue(ahci, cmd);
1014     ahci_command_verify(ahci, cmd);
1015     ahci_command_free(cmd);
1016 }
1017 
ahci_command_free(AHCICommand * cmd)1018 void ahci_command_free(AHCICommand *cmd)
1019 {
1020     g_free(cmd->atapi_cmd);
1021     g_free(cmd->props);
1022     g_free(cmd);
1023 }
1024 
ahci_command_set_flags(AHCICommand * cmd,uint16_t cmdh_flags)1025 void ahci_command_set_flags(AHCICommand *cmd, uint16_t cmdh_flags)
1026 {
1027     cmd->header.flags |= cmdh_flags;
1028 }
1029 
ahci_command_clr_flags(AHCICommand * cmd,uint16_t cmdh_flags)1030 void ahci_command_clr_flags(AHCICommand *cmd, uint16_t cmdh_flags)
1031 {
1032     cmd->header.flags &= ~cmdh_flags;
1033 }
1034 
ahci_atapi_command_set_offset(AHCICommand * cmd,uint64_t lba)1035 static void ahci_atapi_command_set_offset(AHCICommand *cmd, uint64_t lba)
1036 {
1037     unsigned char *cbd = cmd->atapi_cmd;
1038     g_assert(cbd);
1039 
1040     switch (cbd[0]) {
1041     case CMD_ATAPI_READ_10:
1042     case CMD_ATAPI_READ_CD:
1043         g_assert_cmpuint(lba, <=, UINT32_MAX);
1044         stl_be_p(&cbd[2], lba);
1045         break;
1046     case CMD_ATAPI_REQUEST_SENSE:
1047     case CMD_ATAPI_TEST_UNIT_READY:
1048     case CMD_ATAPI_START_STOP_UNIT:
1049         g_assert_cmphex(lba, ==, 0x00);
1050         break;
1051     default:
1052         /* SCSI doesn't have uniform packet formats,
1053          * so you have to add support for it manually. Sorry! */
1054         fprintf(stderr, "The Libqos AHCI driver does not support the "
1055                 "set_offset operation for ATAPI command 0x%02x, "
1056                 "please add support.\n",
1057                 cbd[0]);
1058         g_assert_not_reached();
1059     }
1060 }
1061 
ahci_command_set_offset(AHCICommand * cmd,uint64_t lba_sect)1062 void ahci_command_set_offset(AHCICommand *cmd, uint64_t lba_sect)
1063 {
1064     RegH2DFIS *fis = &(cmd->fis);
1065 
1066     if (cmd->props->atapi) {
1067         ahci_atapi_command_set_offset(cmd, lba_sect);
1068         return;
1069     } else if (!cmd->props->data && !lba_sect) {
1070         /* Not meaningful, ignore. */
1071         return;
1072     } else if (cmd->props->lba28) {
1073         g_assert_cmphex(lba_sect, <=, 0xFFFFFFF);
1074     } else if (cmd->props->lba48 || cmd->props->ncq) {
1075         g_assert_cmphex(lba_sect, <=, 0xFFFFFFFFFFFF);
1076     } else {
1077         /* Can't set offset if we don't know the format. */
1078         g_assert_not_reached();
1079     }
1080 
1081     /* LBA28 uses the low nibble of the device/control register for LBA24:27 */
1082     fis->lba_lo[0] = (lba_sect & 0xFF);
1083     fis->lba_lo[1] = (lba_sect >> 8) & 0xFF;
1084     fis->lba_lo[2] = (lba_sect >> 16) & 0xFF;
1085     if (cmd->props->lba28) {
1086         fis->device = (fis->device & 0xF0) | ((lba_sect >> 24) & 0x0F);
1087     }
1088     fis->lba_hi[0] = (lba_sect >> 24) & 0xFF;
1089     fis->lba_hi[1] = (lba_sect >> 32) & 0xFF;
1090     fis->lba_hi[2] = (lba_sect >> 40) & 0xFF;
1091 }
1092 
ahci_command_set_buffer(AHCICommand * cmd,uint64_t buffer)1093 void ahci_command_set_buffer(AHCICommand *cmd, uint64_t buffer)
1094 {
1095     cmd->buffer = buffer;
1096 }
1097 
ahci_atapi_set_size(AHCICommand * cmd,uint64_t xbytes)1098 static void ahci_atapi_set_size(AHCICommand *cmd, uint64_t xbytes)
1099 {
1100     unsigned char *cbd = cmd->atapi_cmd;
1101     uint64_t nsectors = xbytes / ATAPI_SECTOR_SIZE;
1102     uint32_t tmp;
1103     g_assert(cbd);
1104 
1105     switch (cbd[0]) {
1106     case CMD_ATAPI_READ_10:
1107         g_assert_cmpuint(nsectors, <=, UINT16_MAX);
1108         stw_be_p(&cbd[7], nsectors);
1109         break;
1110     case CMD_ATAPI_READ_CD:
1111         /* 24bit BE store */
1112         g_assert_cmphex(nsectors, <, 1ULL << 24);
1113         tmp = nsectors;
1114         cbd[6] = (tmp & 0xFF0000) >> 16;
1115         cbd[7] = (tmp & 0xFF00) >> 8;
1116         cbd[8] = (tmp & 0xFF);
1117         break;
1118     case CMD_ATAPI_REQUEST_SENSE:
1119         g_assert_cmpuint(xbytes, <=, UINT8_MAX);
1120         cbd[4] = (uint8_t)xbytes;
1121         break;
1122     case CMD_ATAPI_TEST_UNIT_READY:
1123     case CMD_ATAPI_START_STOP_UNIT:
1124         g_assert_cmpuint(xbytes, ==, 0);
1125         break;
1126     default:
1127         /* SCSI doesn't have uniform packet formats,
1128          * so you have to add support for it manually. Sorry! */
1129         fprintf(stderr, "The Libqos AHCI driver does not support the set_size "
1130                 "operation for ATAPI command 0x%02x, please add support.\n",
1131                 cbd[0]);
1132         g_assert_not_reached();
1133     }
1134 }
1135 
ahci_command_set_sizes(AHCICommand * cmd,uint64_t xbytes,unsigned prd_size)1136 void ahci_command_set_sizes(AHCICommand *cmd, uint64_t xbytes,
1137                             unsigned prd_size)
1138 {
1139     uint16_t sect_count;
1140 
1141     /* Each PRD can describe up to 4MiB, and must not be odd. */
1142     g_assert_cmphex(prd_size, <=, 4096 * 1024);
1143     g_assert_cmphex(prd_size & 0x01, ==, 0x00);
1144     if (prd_size) {
1145         cmd->prd_size = prd_size;
1146     }
1147     cmd->xbytes = xbytes;
1148     sect_count = (cmd->xbytes / cmd->sector_size);
1149 
1150     if (cmd->props->ncq) {
1151         NCQFIS *nfis = (NCQFIS *)&(cmd->fis);
1152         nfis->sector_low = sect_count & 0xFF;
1153         nfis->sector_hi = (sect_count >> 8) & 0xFF;
1154     } else if (cmd->props->atapi) {
1155         ahci_atapi_set_size(cmd, xbytes);
1156     } else {
1157         /* For writes, the PIO Setup FIS interrupt only comes from DRQs
1158          * after the first.
1159          */
1160         if (cmd->props->pio && sect_count > (cmd->props->read ? 0 : 1)) {
1161             cmd->interrupts |= AHCI_PX_IS_PSS;
1162         }
1163         cmd->fis.count = sect_count;
1164     }
1165     cmd->header.prdtl = size_to_prdtl(cmd->xbytes, cmd->prd_size);
1166 }
1167 
ahci_command_set_size(AHCICommand * cmd,uint64_t xbytes)1168 void ahci_command_set_size(AHCICommand *cmd, uint64_t xbytes)
1169 {
1170     ahci_command_set_sizes(cmd, xbytes, cmd->prd_size);
1171 }
1172 
ahci_command_set_prd_size(AHCICommand * cmd,unsigned prd_size)1173 void ahci_command_set_prd_size(AHCICommand *cmd, unsigned prd_size)
1174 {
1175     ahci_command_set_sizes(cmd, cmd->xbytes, prd_size);
1176 }
1177 
ahci_command_adjust(AHCICommand * cmd,uint64_t offset,uint64_t buffer,uint64_t xbytes,unsigned prd_size)1178 void ahci_command_adjust(AHCICommand *cmd, uint64_t offset, uint64_t buffer,
1179                          uint64_t xbytes, unsigned prd_size)
1180 {
1181     ahci_command_set_sizes(cmd, xbytes, prd_size);
1182     ahci_command_set_buffer(cmd, buffer);
1183     ahci_command_set_offset(cmd, offset);
1184 }
1185 
ahci_command_commit(AHCIQState * ahci,AHCICommand * cmd,uint8_t port)1186 void ahci_command_commit(AHCIQState *ahci, AHCICommand *cmd, uint8_t port)
1187 {
1188     uint16_t i, prdtl;
1189     uint64_t table_size, table_ptr, remaining;
1190     PRD prd;
1191 
1192     /* This command is now tied to this port/command slot */
1193     cmd->port = port;
1194     cmd->slot = ahci_pick_cmd(ahci, port);
1195 
1196     if (cmd->props->ncq) {
1197         NCQFIS *nfis = (NCQFIS *)&cmd->fis;
1198         nfis->tag = (cmd->slot << 3) & 0xFC;
1199     }
1200 
1201     /* Create a buffer for the command table */
1202     prdtl = size_to_prdtl(cmd->xbytes, cmd->prd_size);
1203     table_size = CMD_TBL_SIZ(prdtl);
1204     table_ptr = ahci_alloc(ahci, table_size);
1205     g_assert(table_ptr);
1206     /* AHCI 1.3: Must be aligned to 0x80 */
1207     g_assert((table_ptr & 0x7F) == 0x00);
1208     cmd->header.ctba = table_ptr;
1209 
1210     /* Commit the command header (part of the Command List Buffer) */
1211     ahci_set_command_header(ahci, port, cmd->slot, &(cmd->header));
1212     /* Now, write the command table (FIS, ACMD, and PRDT) -- FIS first, */
1213     ahci_write_fis(ahci, cmd);
1214     /* Then ATAPI CMD, if needed */
1215     if (cmd->props->atapi) {
1216         qtest_memwrite(ahci->parent->qts, table_ptr + 0x40, cmd->atapi_cmd, 16);
1217     }
1218 
1219     /* Construct and write the PRDs to the command table */
1220     g_assert_cmphex(prdtl, ==, cmd->header.prdtl);
1221     remaining = cmd->xbytes;
1222     for (i = 0; i < prdtl; ++i) {
1223         prd.dba = cpu_to_le64(cmd->buffer + (cmd->prd_size * i));
1224         prd.res = 0;
1225         if (remaining > cmd->prd_size) {
1226             /* Note that byte count is 0-based. */
1227             prd.dbc = cpu_to_le32(cmd->prd_size - 1);
1228             remaining -= cmd->prd_size;
1229         } else {
1230             /* Again, dbc is 0-based. */
1231             prd.dbc = cpu_to_le32(remaining - 1);
1232             remaining = 0;
1233         }
1234         prd.dbc |= cpu_to_le32(0x80000000); /* Request DPS Interrupt */
1235 
1236         /* Commit the PRD entry to the Command Table */
1237         qtest_memwrite(ahci->parent->qts, table_ptr + 0x80 + (i * sizeof(PRD)),
1238                        &prd, sizeof(PRD));
1239     }
1240 
1241     /* Bookmark the PRDTL and CTBA values */
1242     ahci->port[port].ctba[cmd->slot] = table_ptr;
1243     ahci->port[port].prdtl[cmd->slot] = prdtl;
1244 }
1245 
ahci_command_issue_async(AHCIQState * ahci,AHCICommand * cmd)1246 void ahci_command_issue_async(AHCIQState *ahci, AHCICommand *cmd)
1247 {
1248     if (cmd->props->ncq) {
1249         ahci_px_wreg(ahci, cmd->port, AHCI_PX_SACT, (1 << cmd->slot));
1250     }
1251 
1252     ahci_px_wreg(ahci, cmd->port, AHCI_PX_CI, (1 << cmd->slot));
1253 }
1254 
ahci_command_wait(AHCIQState * ahci,AHCICommand * cmd)1255 void ahci_command_wait(AHCIQState *ahci, AHCICommand *cmd)
1256 {
1257     /* We can't rely on STS_BSY until the command has started processing.
1258      * Therefore, we also use the Command Issue bit as indication of
1259      * a command in-flight. */
1260 
1261 #define RSET(REG, MASK) (BITSET(ahci_px_rreg(ahci, cmd->port, (REG)), (MASK)))
1262 
1263     while (!RSET(AHCI_PX_TFD, AHCI_PX_TFD_STS_ERR) &&
1264            (RSET(AHCI_PX_TFD, AHCI_PX_TFD_STS_BSY) ||
1265             RSET(AHCI_PX_CI, 1 << cmd->slot) ||
1266             (cmd->props->ncq && RSET(AHCI_PX_SACT, 1 << cmd->slot)))) {
1267         usleep(50);
1268     }
1269 
1270 }
1271 
ahci_command_issue(AHCIQState * ahci,AHCICommand * cmd)1272 void ahci_command_issue(AHCIQState *ahci, AHCICommand *cmd)
1273 {
1274     ahci_command_issue_async(ahci, cmd);
1275     ahci_command_wait(ahci, cmd);
1276 }
1277 
ahci_command_verify(AHCIQState * ahci,AHCICommand * cmd)1278 void ahci_command_verify(AHCIQState *ahci, AHCICommand *cmd)
1279 {
1280     uint8_t slot = cmd->slot;
1281     uint8_t port = cmd->port;
1282 
1283     ahci_port_check_nonbusy(ahci, cmd);
1284     ahci_port_check_error(ahci, cmd);
1285     ahci_port_check_interrupts(ahci, cmd);
1286     ahci_port_check_cmd_sanity(ahci, cmd);
1287     if (cmd->interrupts & AHCI_PX_IS_DHRS) {
1288         ahci_port_check_d2h_sanity(ahci, port, slot);
1289     }
1290     if (cmd->props->pio) {
1291         ahci_port_check_pio_sanity(ahci, cmd);
1292     }
1293 }
1294 
ahci_command_slot(AHCICommand * cmd)1295 uint8_t ahci_command_slot(AHCICommand *cmd)
1296 {
1297     return cmd->slot;
1298 }
1299