1 /* $NetBSD: aic79xx.c,v 1.68 2022/05/23 19:52:35 andvar Exp $ */
2
3 /*
4 * Core routines and tables shareable across OS platforms.
5 *
6 * Copyright (c) 1994-2002 Justin T. Gibbs.
7 * Copyright (c) 2000-2003 Adaptec Inc.
8 * All rights reserved.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions, and the following disclaimer,
15 * without modification.
16 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
17 * substantially similar to the "NO WARRANTY" disclaimer below
18 * ("Disclaimer") and any redistribution must be conditioned upon
19 * including a substantially similar Disclaimer requirement for further
20 * binary redistribution.
21 * 3. Neither the names of the above-listed copyright holders nor the names
22 * of any contributors may be used to endorse or promote products derived
23 * from this software without specific prior written permission.
24 *
25 * Alternatively, this software may be distributed under the terms of the
26 * GNU General Public License ("GPL") version 2 as published by the Free
27 * Software Foundation.
28 *
29 * NO WARRANTY
30 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
31 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
32 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
33 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
34 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
35 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
36 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
37 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
38 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
39 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
40 * POSSIBILITY OF SUCH DAMAGES.
41 *
42 * Id: //depot/aic7xxx/aic7xxx/aic79xx.c#202 $
43 *
44 * $FreeBSD: src/sys/dev/aic7xxx/aic79xx.c,v 1.24 2003/06/28 04:46:54 gibbs Exp $
45 */
46 /*
47 * Ported from FreeBSD by Pascal Renauld, Network Storage Solutions, Inc.
48 * - April 2003
49 */
50
51 #include <sys/cdefs.h>
52 __KERNEL_RCSID(0, "$NetBSD: aic79xx.c,v 1.68 2022/05/23 19:52:35 andvar Exp $");
53
54 #include <dev/ic/aic79xx_osm.h>
55 #include <dev/ic/aic79xx_inline.h>
56 #include <dev/ic/aic7xxx_cam.h>
57
58 #include <dev/microcode/aic7xxx/aicasm.h>
59 #include <dev/microcode/aic7xxx/aicasm_insformat.h>
60
61
62 /******************************** Globals *************************************/
63 struct ahd_softc_tailq ahd_tailq = TAILQ_HEAD_INITIALIZER(ahd_tailq);
64
65 /***************************** Lookup Tables **********************************/
66 const char * const ahd_chip_names[] =
67 {
68 "NONE",
69 "aic7901",
70 "aic7902",
71 "aic7901A"
72 };
73
74 /*
75 * Hardware error codes.
76 */
77 struct ahd_hard_error_entry {
78 uint8_t errno;
79 const char *errmesg;
80 };
81
82 static struct ahd_hard_error_entry ahd_hard_errors[] = {
83 { DSCTMOUT, "Discard Timer has timed out" },
84 { ILLOPCODE, "Illegal Opcode in sequencer program" },
85 { SQPARERR, "Sequencer Parity Error" },
86 { DPARERR, "Data-path Parity Error" },
87 { MPARERR, "Scratch or SCB Memory Parity Error" },
88 { CIOPARERR, "CIOBUS Parity Error" },
89 };
90 static const u_int num_errors = NUM_ELEMENTS(ahd_hard_errors);
91
92 static struct ahd_phase_table_entry ahd_phase_table[] =
93 {
94 { P_DATAOUT, MSG_NOOP, "in Data-out phase" },
95 { P_DATAIN, MSG_INITIATOR_DET_ERR, "in Data-in phase" },
96 { P_DATAOUT_DT, MSG_NOOP, "in DT Data-out phase" },
97 { P_DATAIN_DT, MSG_INITIATOR_DET_ERR, "in DT Data-in phase" },
98 { P_COMMAND, MSG_NOOP, "in Command phase" },
99 { P_MESGOUT, MSG_NOOP, "in Message-out phase" },
100 { P_STATUS, MSG_INITIATOR_DET_ERR, "in Status phase" },
101 { P_MESGIN, MSG_PARITY_ERROR, "in Message-in phase" },
102 { P_BUSFREE, MSG_NOOP, "while idle" },
103 { 0, MSG_NOOP, "in unknown phase" }
104 };
105
106 /*
107 * In most cases we only wish to iterate over real phases, so
108 * exclude the last element from the count.
109 */
110 static const u_int num_phases = NUM_ELEMENTS(ahd_phase_table) - 1;
111
112 /* Our Sequencer Program */
113 #include <dev/microcode/aic7xxx/aic79xx_seq.h>
114
115 /**************************** Function Declarations ***************************/
116 static void ahd_handle_transmission_error(struct ahd_softc *ahd);
117 static void ahd_handle_lqiphase_error(struct ahd_softc *ahd,
118 u_int lqistat1);
119 static int ahd_handle_pkt_busfree(struct ahd_softc *ahd,
120 u_int busfreetime);
121 static int ahd_handle_nonpkt_busfree(struct ahd_softc *ahd);
122 static void ahd_handle_proto_violation(struct ahd_softc *ahd);
123 static void ahd_force_renegotiation(struct ahd_softc *ahd,
124 struct ahd_devinfo *devinfo);
125
126 static struct ahd_tmode_tstate*
127 ahd_alloc_tstate(struct ahd_softc *ahd,
128 u_int scsi_id, char channel);
129 #ifdef AHD_TARGET_MODE
130 static void ahd_free_tstate(struct ahd_softc *ahd,
131 u_int scsi_id, char channel, int force);
132 #endif
133 static void ahd_devlimited_syncrate(struct ahd_softc *ahd,
134 struct ahd_initiator_tinfo *,
135 u_int *period,
136 u_int *ppr_options,
137 role_t role);
138 static void ahd_update_neg_table(struct ahd_softc *ahd,
139 struct ahd_devinfo *devinfo,
140 struct ahd_transinfo *tinfo);
141 static void ahd_update_pending_scbs(struct ahd_softc *ahd);
142 static void ahd_fetch_devinfo(struct ahd_softc *ahd,
143 struct ahd_devinfo *devinfo);
144 static void ahd_scb_devinfo(struct ahd_softc *ahd,
145 struct ahd_devinfo *devinfo,
146 struct scb *scb);
147 static void ahd_setup_initiator_msgout(struct ahd_softc *ahd,
148 struct ahd_devinfo *devinfo,
149 struct scb *scb);
150 static void ahd_build_transfer_msg(struct ahd_softc *ahd,
151 struct ahd_devinfo *devinfo);
152 static void ahd_construct_sdtr(struct ahd_softc *ahd,
153 struct ahd_devinfo *devinfo,
154 u_int period, u_int offset);
155 static void ahd_construct_wdtr(struct ahd_softc *ahd,
156 struct ahd_devinfo *devinfo,
157 u_int bus_width);
158 static void ahd_construct_ppr(struct ahd_softc *ahd,
159 struct ahd_devinfo *devinfo,
160 u_int period, u_int offset,
161 u_int bus_width, u_int ppr_options);
162 static void ahd_clear_msg_state(struct ahd_softc *ahd);
163 static void ahd_handle_message_phase(struct ahd_softc *ahd);
164 typedef enum {
165 AHDMSG_1B,
166 AHDMSG_2B,
167 AHDMSG_EXT
168 } ahd_msgtype;
169 static int ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type,
170 u_int msgval, int full);
171 static int ahd_parse_msg(struct ahd_softc *ahd,
172 struct ahd_devinfo *devinfo);
173 static int ahd_handle_msg_reject(struct ahd_softc *ahd,
174 struct ahd_devinfo *devinfo);
175 static void ahd_handle_ign_wide_residue(struct ahd_softc *ahd,
176 struct ahd_devinfo *devinfo);
177 static void ahd_reinitialize_dataptrs(struct ahd_softc *ahd);
178 static void ahd_handle_devreset(struct ahd_softc *ahd,
179 struct ahd_devinfo *devinfo,
180 u_int lun, cam_status status,
181 const char *message,
182 int verbose_level);
183 #if AHD_TARGET_MODE
184 static void ahd_setup_target_msgin(struct ahd_softc *ahd,
185 struct ahd_devinfo *devinfo,
186 struct scb *scb);
187 #endif
188
189 static u_int ahd_sglist_size(struct ahd_softc *ahd);
190 static u_int ahd_sglist_allocsize(struct ahd_softc *ahd);
191 static void ahd_initialize_hscbs(struct ahd_softc *ahd);
192 static int ahd_init_scbdata(struct ahd_softc *ahd);
193 static void ahd_fini_scbdata(struct ahd_softc *ahd);
194 static void ahd_setup_iocell_workaround(struct ahd_softc *ahd);
195 static void ahd_iocell_first_selection(struct ahd_softc *ahd);
196 static void ahd_add_col_list(struct ahd_softc *ahd,
197 struct scb *scb, u_int col_idx);
198 static void ahd_rem_col_list(struct ahd_softc *ahd,
199 struct scb *scb);
200 static void ahd_chip_init(struct ahd_softc *ahd);
201 static void ahd_qinfifo_requeue(struct ahd_softc *ahd,
202 struct scb *prev_scb,
203 struct scb *scb);
204 static int ahd_qinfifo_count(struct ahd_softc *ahd);
205 static int ahd_search_scb_list(struct ahd_softc *ahd, int target,
206 char channel, int lun, u_int tag,
207 role_t role, uint32_t status,
208 ahd_search_action action,
209 u_int *list_head, u_int tid);
210 static void ahd_stitch_tid_list(struct ahd_softc *ahd,
211 u_int tid_prev, u_int tid_cur,
212 u_int tid_next);
213 static void ahd_add_scb_to_free_list(struct ahd_softc *ahd,
214 u_int scbid);
215 static u_int ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid,
216 u_int prev, u_int next, u_int tid);
217 static void ahd_reset_current_bus(struct ahd_softc *ahd);
218 static ahd_callback_t ahd_reset_poll;
219 static ahd_callback_t ahd_stat_timer;
220 #ifdef AHD_DUMP_SEQ
221 static void ahd_dumpseq(struct ahd_softc *ahd);
222 #endif
223 static void ahd_loadseq(struct ahd_softc *ahd);
224 static int ahd_check_patch(struct ahd_softc *ahd,
225 const struct patch **start_patch,
226 u_int start_instr, u_int *skip_addr);
227 static u_int ahd_resolve_seqaddr(struct ahd_softc *ahd,
228 u_int address);
229 static void ahd_download_instr(struct ahd_softc *ahd,
230 u_int instrptr, uint8_t *dconsts);
231 static int ahd_probe_stack_size(struct ahd_softc *ahd);
232 static int ahd_scb_active_in_fifo(struct ahd_softc *ahd,
233 struct scb *scb);
234 static void ahd_run_data_fifo(struct ahd_softc *ahd,
235 struct scb *scb);
236
237 #ifdef AHD_TARGET_MODE
238 static void ahd_queue_lstate_event(struct ahd_softc *ahd,
239 struct ahd_tmode_lstate *lstate,
240 u_int initiator_id,
241 u_int event_type,
242 u_int event_arg);
243 static void ahd_update_scsiid(struct ahd_softc *ahd,
244 u_int targid_mask);
245 static int ahd_handle_target_cmd(struct ahd_softc *ahd,
246 struct target_cmd *cmd);
247 #endif
248
249 /************************** Added for porting to NetBSD ***********************/
250 static int ahd_createdmamem(bus_dma_tag_t tag,
251 int size,
252 int flags,
253 bus_dmamap_t *mapp,
254 void **vaddr,
255 bus_addr_t *baddr,
256 bus_dma_segment_t *seg,
257 int *nseg,
258 const char *myname, const char *what);
259
260 static void ahd_freedmamem(bus_dma_tag_t tag,
261 int size,
262 bus_dmamap_t map,
263 void *vaddr,
264 bus_dma_segment_t *seg,
265 int nseg);
266
267 /******************************** Private Inlines *****************************/
268 static inline void ahd_assert_atn(struct ahd_softc *ahd);
269 static inline int ahd_currently_packetized(struct ahd_softc *ahd);
270 static inline int ahd_set_active_fifo(struct ahd_softc *ahd);
271
272 static inline void
ahd_assert_atn(struct ahd_softc * ahd)273 ahd_assert_atn(struct ahd_softc *ahd)
274 {
275 ahd_outb(ahd, SCSISIGO, ATNO);
276 }
277
278 /*
279 * Determine if the current connection has a packetized
280 * agreement. This does not necessarily mean that we
281 * are currently in a packetized transfer. We could
282 * just as easily be sending or receiving a message.
283 */
284 static inline int
ahd_currently_packetized(struct ahd_softc * ahd)285 ahd_currently_packetized(struct ahd_softc *ahd)
286 {
287 ahd_mode_state saved_modes;
288 int packetized;
289
290 saved_modes = ahd_save_modes(ahd);
291 if ((ahd->bugs & AHD_PKTIZED_STATUS_BUG) != 0) {
292 /*
293 * The packetized bit refers to the last
294 * connection, not the current one. Check
295 * for non-zero LQISTATE instead.
296 */
297 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
298 packetized = ahd_inb(ahd, LQISTATE) != 0;
299 } else {
300 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
301 packetized = ahd_inb(ahd, LQISTAT2) & PACKETIZED;
302 }
303 ahd_restore_modes(ahd, saved_modes);
304 return (packetized);
305 }
306
307 static inline int
ahd_set_active_fifo(struct ahd_softc * ahd)308 ahd_set_active_fifo(struct ahd_softc *ahd)
309 {
310 u_int active_fifo;
311
312 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
313 active_fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO;
314 switch (active_fifo) {
315 case 0:
316 case 1:
317 ahd_set_modes(ahd, active_fifo, active_fifo);
318 return (1);
319 default:
320 return (0);
321 }
322 }
323
324 /************************* Sequencer Execution Control ************************/
325 /*
326 * Restart the sequencer program from address zero
327 */
328 void
ahd_restart(struct ahd_softc * ahd)329 ahd_restart(struct ahd_softc *ahd)
330 {
331
332 ahd_pause(ahd);
333
334 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
335
336 /* No more pending messages */
337 ahd_clear_msg_state(ahd);
338 ahd_outb(ahd, SCSISIGO, 0); /* De-assert BSY */
339 ahd_outb(ahd, MSG_OUT, MSG_NOOP); /* No message to send */
340 ahd_outb(ahd, SXFRCTL1, ahd_inb(ahd, SXFRCTL1) & ~BITBUCKET);
341 ahd_outb(ahd, SEQINTCTL, 0);
342 ahd_outb(ahd, LASTPHASE, P_BUSFREE);
343 ahd_outb(ahd, SEQ_FLAGS, 0);
344 ahd_outb(ahd, SAVED_SCSIID, 0xFF);
345 ahd_outb(ahd, SAVED_LUN, 0xFF);
346
347 /*
348 * Ensure that the sequencer's idea of TQINPOS
349 * matches our own. The sequencer increments TQINPOS
350 * only after it sees a DMA complete and a reset could
351 * occur before the increment leaving the kernel to believe
352 * the command arrived but the sequencer to not.
353 */
354 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext);
355
356 /* Always allow reselection */
357 ahd_outb(ahd, SCSISEQ1,
358 ahd_inb(ahd, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP));
359 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
360 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET);
361 ahd_unpause(ahd);
362 }
363
364 void
ahd_clear_fifo(struct ahd_softc * ahd,u_int fifo)365 ahd_clear_fifo(struct ahd_softc *ahd, u_int fifo)
366 {
367 ahd_mode_state saved_modes;
368
369 #ifdef AHD_DEBUG
370 if ((ahd_debug & AHD_SHOW_FIFOS) != 0)
371 printf("%s: Clearing FIFO %d\n", ahd_name(ahd), fifo);
372 #endif
373 saved_modes = ahd_save_modes(ahd);
374 ahd_set_modes(ahd, fifo, fifo);
375 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT);
376 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0)
377 ahd_outb(ahd, CCSGCTL, CCSGRESET);
378 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR);
379 ahd_outb(ahd, SG_STATE, 0);
380 ahd_restore_modes(ahd, saved_modes);
381 }
382
383 /************************* Input/Output Queues ********************************/
384 /*
385 * Flush and completed commands that are sitting in the command
386 * complete queues down on the chip but have yet to be DMA'ed back up.
387 */
388 void
ahd_flush_qoutfifo(struct ahd_softc * ahd)389 ahd_flush_qoutfifo(struct ahd_softc *ahd)
390 {
391 struct scb *scb;
392 ahd_mode_state saved_modes;
393 u_int saved_scbptr;
394 u_int ccscbctl;
395 u_int scbid;
396 u_int next_scbid;
397
398 saved_modes = ahd_save_modes(ahd);
399
400 /*
401 * Complete any SCBs that just finished being
402 * DMA'ed into the qoutfifo.
403 */
404 ahd_run_qoutfifo(ahd);
405
406 /*
407 * Flush the good status FIFO for completed packetized commands.
408 */
409 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
410 saved_scbptr = ahd_get_scbptr(ahd);
411 while ((ahd_inb(ahd, LQISTAT2) & LQIGSAVAIL) != 0) {
412 u_int fifo_mode;
413 u_int i;
414
415 scbid = (ahd_inb(ahd, GSFIFO+1) << 8)
416 | ahd_inb(ahd, GSFIFO);
417 scb = ahd_lookup_scb(ahd, scbid);
418 if (scb == NULL) {
419 printf("%s: Warning - GSFIFO SCB %d invalid\n",
420 ahd_name(ahd), scbid);
421 continue;
422 }
423 /*
424 * Determine if this transaction is still active in
425 * any FIFO. If it is, we must flush that FIFO to
426 * the host before completing the command.
427 */
428 fifo_mode = 0;
429 for (i = 0; i < 2; i++) {
430 /* Toggle to the other mode. */
431 fifo_mode ^= 1;
432 ahd_set_modes(ahd, fifo_mode, fifo_mode);
433 if (ahd_scb_active_in_fifo(ahd, scb) == 0)
434 continue;
435
436 ahd_run_data_fifo(ahd, scb);
437
438 /*
439 * Clearing this transaction in this FIFO may
440 * cause a CFG4DATA for this same transaction
441 * to assert in the other FIFO. Make sure we
442 * loop one more time and check the other FIFO.
443 */
444 i = 0;
445 }
446 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
447 ahd_set_scbptr(ahd, scbid);
448 if ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_LIST_NULL) == 0
449 && ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_FULL_RESID) != 0
450 || (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR)
451 & SG_LIST_NULL) != 0)) {
452 u_int comp_head;
453
454 /*
455 * The transfer completed with a residual.
456 * Place this SCB on the complete DMA list
457 * so that we Update our in-core copy of the
458 * SCB before completing the command.
459 */
460 ahd_outb(ahd, SCB_SCSI_STATUS, 0);
461 ahd_outb(ahd, SCB_SGPTR,
462 ahd_inb_scbram(ahd, SCB_SGPTR)
463 | SG_STATUS_VALID);
464 ahd_outw(ahd, SCB_TAG, SCB_GET_TAG(scb));
465 comp_head = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD);
466 ahd_outw(ahd, SCB_NEXT_COMPLETE, comp_head);
467 if (SCBID_IS_NULL(comp_head))
468 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD,
469 SCB_GET_TAG(scb));
470 } else
471 ahd_complete_scb(ahd, scb);
472 }
473 ahd_set_scbptr(ahd, saved_scbptr);
474
475 /*
476 * Setup for command channel portion of flush.
477 */
478 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
479
480 /*
481 * Wait for any inprogress DMA to complete and clear DMA state
482 * if this if for an SCB in the qinfifo.
483 */
484 while (((ccscbctl = ahd_inb(ahd, CCSCBCTL)) & (CCARREN|CCSCBEN)) != 0) {
485
486 if ((ccscbctl & (CCSCBDIR|CCARREN)) == (CCSCBDIR|CCARREN)) {
487 if ((ccscbctl & ARRDONE) != 0)
488 break;
489 } else if ((ccscbctl & CCSCBDONE) != 0)
490 break;
491 ahd_delay(200);
492 }
493 if ((ccscbctl & CCSCBDIR) != 0)
494 ahd_outb(ahd, CCSCBCTL, ccscbctl & ~(CCARREN|CCSCBEN));
495
496 saved_scbptr = ahd_get_scbptr(ahd);
497 /*
498 * Manually update/complete any completed SCBs that are waiting to be
499 * DMA'ed back up to the host.
500 */
501 scbid = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD);
502 while (!SCBID_IS_NULL(scbid)) {
503 uint8_t *hscb_ptr;
504 u_int i;
505
506 ahd_set_scbptr(ahd, scbid);
507 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
508 scb = ahd_lookup_scb(ahd, scbid);
509 if (scb == NULL) {
510 printf("%s: Warning - DMA-up and complete "
511 "SCB %d invalid\n", ahd_name(ahd), scbid);
512 continue;
513 }
514 hscb_ptr = (uint8_t *)scb->hscb;
515 for (i = 0; i < sizeof(struct hardware_scb); i++)
516 *hscb_ptr++ = ahd_inb_scbram(ahd, SCB_BASE + i);
517
518 ahd_complete_scb(ahd, scb);
519 scbid = next_scbid;
520 }
521 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL);
522
523 scbid = ahd_inw(ahd, COMPLETE_SCB_HEAD);
524 while (!SCBID_IS_NULL(scbid)) {
525
526 ahd_set_scbptr(ahd, scbid);
527 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
528 scb = ahd_lookup_scb(ahd, scbid);
529 if (scb == NULL) {
530 printf("%s: Warning - Complete SCB %d invalid\n",
531 ahd_name(ahd), scbid);
532 continue;
533 }
534
535 ahd_complete_scb(ahd, scb);
536 scbid = next_scbid;
537 }
538 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL);
539
540 /*
541 * Restore state.
542 */
543 ahd_set_scbptr(ahd, saved_scbptr);
544 ahd_restore_modes(ahd, saved_modes);
545 ahd->flags |= AHD_UPDATE_PEND_CMDS;
546 }
547
548 /*
549 * Determine if an SCB for a packetized transaction
550 * is active in a FIFO.
551 */
552 static int
ahd_scb_active_in_fifo(struct ahd_softc * ahd,struct scb * scb)553 ahd_scb_active_in_fifo(struct ahd_softc *ahd, struct scb *scb)
554 {
555
556 /*
557 * The FIFO is only active for our transaction if
558 * the SCBPTR matches the SCB's ID and the firmware
559 * has installed a handler for the FIFO or we have
560 * a pending SAVEPTRS or CFG4DATA interrupt.
561 */
562 if (ahd_get_scbptr(ahd) != SCB_GET_TAG(scb)
563 || ((ahd_inb(ahd, LONGJMP_ADDR+1) & INVALID_ADDR) != 0
564 && (ahd_inb(ahd, SEQINTSRC) & (CFG4DATA|SAVEPTRS)) == 0))
565 return (0);
566
567 return (1);
568 }
569
570 /*
571 * Run a data fifo to completion for a transaction we know
572 * has completed across the SCSI bus (good status has been
573 * received). We are already set to the correct FIFO mode
574 * on entry to this routine.
575 *
576 * This function attempts to operate exactly as the firmware
577 * would when running this FIFO. Care must be taken to update
578 * this routine any time the firmware's FIFO algorithm is
579 * changed.
580 */
581 static void
ahd_run_data_fifo(struct ahd_softc * ahd,struct scb * scb)582 ahd_run_data_fifo(struct ahd_softc *ahd, struct scb *scb)
583 {
584 u_int seqintsrc;
585
586 while (1) {
587 seqintsrc = ahd_inb(ahd, SEQINTSRC);
588 if ((seqintsrc & CFG4DATA) != 0) {
589 uint32_t datacnt;
590 uint32_t sgptr;
591
592 /*
593 * Clear full residual flag.
594 */
595 sgptr = ahd_inl_scbram(ahd, SCB_SGPTR) & ~SG_FULL_RESID;
596 ahd_outb(ahd, SCB_SGPTR, sgptr);
597
598 /*
599 * Load datacnt and address.
600 */
601 datacnt = ahd_inl_scbram(ahd, SCB_DATACNT);
602 if ((datacnt & AHD_DMA_LAST_SEG) != 0) {
603 sgptr |= LAST_SEG;
604 ahd_outb(ahd, SG_STATE, 0);
605 } else
606 ahd_outb(ahd, SG_STATE, LOADING_NEEDED);
607 ahd_outq(ahd, HADDR, ahd_inq_scbram(ahd, SCB_DATAPTR));
608 ahd_outl(ahd, HCNT, datacnt & AHD_SG_LEN_MASK);
609 ahd_outb(ahd, SG_CACHE_PRE, sgptr);
610 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN);
611
612 /*
613 * Initialize Residual Fields.
614 */
615 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, datacnt >> 24);
616 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr & SG_PTR_MASK);
617
618 /*
619 * Mark the SCB as having a FIFO in use.
620 */
621 ahd_outb(ahd, SCB_FIFO_USE_COUNT,
622 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) + 1);
623
624 /*
625 * Install a "fake" handler for this FIFO.
626 */
627 ahd_outw(ahd, LONGJMP_ADDR, 0);
628
629 /*
630 * Notify the hardware that we have satisfied
631 * this sequencer interrupt.
632 */
633 ahd_outb(ahd, CLRSEQINTSRC, CLRCFG4DATA);
634 } else if ((seqintsrc & SAVEPTRS) != 0) {
635 uint32_t sgptr;
636 uint32_t resid;
637
638 if ((ahd_inb(ahd, LONGJMP_ADDR+1)&INVALID_ADDR) != 0) {
639 /*
640 * Snapshot Save Pointers. Clear
641 * the snapshot and continue.
642 */
643 ahd_outb(ahd, DFFSXFRCTL, CLRCHN);
644 continue;
645 }
646
647 /*
648 * Disable S/G fetch so the DMA engine
649 * is available to future users.
650 */
651 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0)
652 ahd_outb(ahd, CCSGCTL, 0);
653 ahd_outb(ahd, SG_STATE, 0);
654
655 /*
656 * Flush the data FIFO. Strictly only
657 * necessary for Rev A parts.
658 */
659 ahd_outb(ahd, DFCNTRL,
660 ahd_inb(ahd, DFCNTRL) | FIFOFLUSH);
661
662 /*
663 * Calculate residual.
664 */
665 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
666 resid = ahd_inl(ahd, SHCNT);
667 resid |=
668 ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT+3) << 24;
669 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, resid);
670 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG) == 0) {
671 /*
672 * Must back up to the correct S/G element.
673 * Typically this just means resetting our
674 * low byte to the offset in the SG_CACHE,
675 * but if we wrapped, we have to correct
676 * the other bytes of the sgptr too.
677 */
678 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & 0x80) != 0
679 && (sgptr & 0x80) == 0)
680 sgptr -= 0x100;
681 sgptr &= ~0xFF;
682 sgptr |= ahd_inb(ahd, SG_CACHE_SHADOW)
683 & SG_ADDR_MASK;
684 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr);
685 ahd_outb(ahd, SCB_RESIDUAL_DATACNT + 3, 0);
686 } else if ((resid & AHD_SG_LEN_MASK) == 0) {
687 ahd_outb(ahd, SCB_RESIDUAL_SGPTR,
688 sgptr | SG_LIST_NULL);
689 }
690 /*
691 * Save Pointers.
692 */
693 ahd_outq(ahd, SCB_DATAPTR, ahd_inq(ahd, SHADDR));
694 ahd_outl(ahd, SCB_DATACNT, resid);
695 ahd_outl(ahd, SCB_SGPTR, sgptr);
696 ahd_outb(ahd, CLRSEQINTSRC, CLRSAVEPTRS);
697 ahd_outb(ahd, SEQIMODE,
698 ahd_inb(ahd, SEQIMODE) | ENSAVEPTRS);
699 /*
700 * If the data is to the SCSI bus, we are
701 * done, otherwise wait for FIFOEMP.
702 */
703 if ((ahd_inb(ahd, DFCNTRL) & DIRECTION) != 0)
704 break;
705 } else if ((ahd_inb(ahd, SG_STATE) & LOADING_NEEDED) != 0) {
706 uint32_t sgptr;
707 uint64_t data_addr;
708 uint32_t data_len;
709 u_int dfcntrl;
710
711 /*
712 * Disable S/G fetch so the DMA engine
713 * is available to future users.
714 */
715 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) {
716 ahd_outb(ahd, CCSGCTL, 0);
717 ahd_outb(ahd, SG_STATE, LOADING_NEEDED);
718 }
719
720 /*
721 * Wait for the DMA engine to notice that the
722 * host transfer is enabled and that there is
723 * space in the S/G FIFO for new segments before
724 * loading more segments.
725 */
726 if ((ahd_inb(ahd, DFSTATUS) & PRELOAD_AVAIL) == 0)
727 continue;
728 if ((ahd_inb(ahd, DFCNTRL) & HDMAENACK) == 0)
729 continue;
730
731 /*
732 * Determine the offset of the next S/G
733 * element to load.
734 */
735 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
736 sgptr &= SG_PTR_MASK;
737 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
738 struct ahd_dma64_seg *sg;
739
740 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
741 data_addr = sg->addr;
742 data_len = sg->len;
743 sgptr += sizeof(*sg);
744 } else {
745 struct ahd_dma_seg *sg;
746
747 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
748 data_addr = sg->len & AHD_SG_HIGH_ADDR_MASK;
749 data_addr <<= 8;
750 data_addr |= sg->addr;
751 data_len = sg->len;
752 sgptr += sizeof(*sg);
753 }
754
755 /*
756 * Update residual information.
757 */
758 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, data_len >> 24);
759 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr);
760
761 /*
762 * Load the S/G.
763 */
764 if (data_len & AHD_DMA_LAST_SEG) {
765 sgptr |= LAST_SEG;
766 ahd_outb(ahd, SG_STATE, 0);
767 }
768 ahd_outq(ahd, HADDR, data_addr);
769 ahd_outl(ahd, HCNT, data_len & AHD_SG_LEN_MASK);
770 ahd_outb(ahd, SG_CACHE_PRE, sgptr & 0xFF);
771
772 /*
773 * Advertise the segment to the hardware.
774 */
775 dfcntrl = ahd_inb(ahd, DFCNTRL)|PRELOADEN|HDMAEN;
776 if ((ahd->features & AHD_NEW_DFCNTRL_OPTS)!=0) {
777 /*
778 * Use SCSIENWRDIS so that SCSIEN
779 * is never modified by this
780 * operation.
781 */
782 dfcntrl |= SCSIENWRDIS;
783 }
784 ahd_outb(ahd, DFCNTRL, dfcntrl);
785 } else if ((ahd_inb(ahd, SG_CACHE_SHADOW)
786 & LAST_SEG_DONE) != 0) {
787
788 /*
789 * Transfer completed to the end of SG list
790 * and has flushed to the host.
791 */
792 ahd_outb(ahd, SCB_SGPTR,
793 ahd_inb_scbram(ahd, SCB_SGPTR) | SG_LIST_NULL);
794 break;
795 } else if ((ahd_inb(ahd, DFSTATUS) & FIFOEMP) != 0) {
796 break;
797 }
798 ahd_delay(200);
799 }
800 /*
801 * Clear any handler for this FIFO, decrement
802 * the FIFO use count for the SCB, and release
803 * the FIFO.
804 */
805 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR);
806 ahd_outb(ahd, SCB_FIFO_USE_COUNT,
807 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) - 1);
808 ahd_outb(ahd, DFFSXFRCTL, CLRCHN);
809 }
810
811 void
ahd_run_qoutfifo(struct ahd_softc * ahd)812 ahd_run_qoutfifo(struct ahd_softc *ahd)
813 {
814 struct scb *scb;
815 u_int scb_index;
816
817 if ((ahd->flags & AHD_RUNNING_QOUTFIFO) != 0)
818 panic("ahd_run_qoutfifo recursion");
819 ahd->flags |= AHD_RUNNING_QOUTFIFO;
820 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_POSTREAD);
821 while ((ahd->qoutfifo[ahd->qoutfifonext]
822 & QOUTFIFO_ENTRY_VALID_LE) == ahd->qoutfifonext_valid_tag) {
823
824 scb_index = ahd_le16toh(ahd->qoutfifo[ahd->qoutfifonext]
825 & ~QOUTFIFO_ENTRY_VALID_LE);
826 scb = ahd_lookup_scb(ahd, scb_index);
827 if (scb == NULL) {
828 printf("%s: WARNING no command for scb %d "
829 "(cmdcmplt)\nQOUTPOS = %d\n",
830 ahd_name(ahd), scb_index,
831 ahd->qoutfifonext);
832 ahd_dump_card_state(ahd);
833 } else
834 ahd_complete_scb(ahd, scb);
835
836 ahd->qoutfifonext = (ahd->qoutfifonext+1) & (AHD_QOUT_SIZE-1);
837 if (ahd->qoutfifonext == 0)
838 ahd->qoutfifonext_valid_tag ^= QOUTFIFO_ENTRY_VALID_LE;
839 }
840 ahd->flags &= ~AHD_RUNNING_QOUTFIFO;
841 }
842
843 /************************* Interrupt Handling *********************************/
844 void
ahd_handle_hwerrint(struct ahd_softc * ahd)845 ahd_handle_hwerrint(struct ahd_softc *ahd)
846 {
847 /*
848 * Some catastrophic hardware error has occurred.
849 * Print it for the user and disable the controller.
850 */
851 int i;
852 int error;
853
854 error = ahd_inb(ahd, ERROR);
855 for (i = 0; i < num_errors; i++) {
856 if ((error & ahd_hard_errors[i].errno) != 0)
857 printf("%s: hwerrint, %s\n",
858 ahd_name(ahd), ahd_hard_errors[i].errmesg);
859 }
860
861 ahd_dump_card_state(ahd);
862 panic("BRKADRINT");
863
864 /* Tell everyone that this HBA is no longer available */
865 ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS,
866 CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN,
867 CAM_NO_HBA);
868
869 /* Tell the system that this controller has gone away. */
870 ahd_free(ahd);
871 }
872
873 void
ahd_handle_seqint(struct ahd_softc * ahd,u_int intstat)874 ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat)
875 {
876 u_int seqintcode;
877
878 /*
879 * Save the sequencer interrupt code and clear the SEQINT
880 * bit. We will unpause the sequencer, if appropriate,
881 * after servicing the request.
882 */
883 seqintcode = ahd_inb(ahd, SEQINTCODE);
884 ahd_outb(ahd, CLRINT, CLRSEQINT);
885 if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) {
886 /*
887 * Unpause the sequencer and let it clear
888 * SEQINT by writing NO_SEQINT to it. This
889 * will cause the sequencer to be paused again,
890 * which is the expected state of this routine.
891 */
892 ahd_unpause(ahd);
893 while (!ahd_is_paused(ahd))
894 ;
895 ahd_outb(ahd, CLRINT, CLRSEQINT);
896 }
897 ahd_update_modes(ahd);
898 #ifdef AHD_DEBUG
899 if ((ahd_debug & AHD_SHOW_MISC) != 0)
900 printf("%s: Handle Seqint Called for code %d\n",
901 ahd_name(ahd), seqintcode);
902 #endif
903 switch (seqintcode) {
904 case BAD_SCB_STATUS:
905 {
906 struct scb *scb;
907 u_int scbid;
908 int cmds_pending;
909
910 scbid = ahd_get_scbptr(ahd);
911 scb = ahd_lookup_scb(ahd, scbid);
912 if (scb != NULL) {
913 ahd_complete_scb(ahd, scb);
914 } else {
915 printf("%s: WARNING no command for scb %d "
916 "(bad status)\n", ahd_name(ahd), scbid);
917 ahd_dump_card_state(ahd);
918 }
919 cmds_pending = ahd_inw(ahd, CMDS_PENDING);
920 if (cmds_pending > 0)
921 ahd_outw(ahd, CMDS_PENDING, cmds_pending - 1);
922 break;
923 }
924 case ENTERING_NONPACK:
925 {
926 struct scb *scb;
927 u_int scbid;
928
929 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
930 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
931 scbid = ahd_get_scbptr(ahd);
932 scb = ahd_lookup_scb(ahd, scbid);
933 if (scb == NULL) {
934 /*
935 * Somehow need to know if this
936 * is from a selection or reselection.
937 * From that, we can determine target
938 * ID so we at least have an I_T nexus.
939 */
940 } else {
941 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid);
942 ahd_outb(ahd, SAVED_LUN, scb->hscb->lun);
943 ahd_outb(ahd, SEQ_FLAGS, 0x0);
944 }
945 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0
946 && (ahd_inb(ahd, SCSISIGO) & ATNO) != 0) {
947 /*
948 * Phase change after read stream with
949 * CRC error with P0 asserted on last
950 * packet.
951 */
952 #ifdef AHD_DEBUG
953 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
954 printf("%s: Assuming LQIPHASE_NLQ with "
955 "P0 assertion\n", ahd_name(ahd));
956 #endif
957 }
958 #ifdef AHD_DEBUG
959 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
960 printf("%s: Entering NONPACK\n", ahd_name(ahd));
961 #endif
962 break;
963 }
964 case INVALID_SEQINT:
965 printf("%s: Invalid Sequencer interrupt occurred.\n",
966 ahd_name(ahd));
967 ahd_dump_card_state(ahd);
968 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
969 break;
970 case STATUS_OVERRUN:
971 {
972 struct scb *scb;
973 u_int scbid;
974
975 scbid = ahd_get_scbptr(ahd);
976 scb = ahd_lookup_scb(ahd, scbid);
977 if (scb != NULL)
978 ahd_print_path(ahd, scb);
979 else
980 printf("%s: ", ahd_name(ahd));
981 printf("SCB %d Packetized Status Overrun", scbid);
982 ahd_dump_card_state(ahd);
983 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
984 break;
985 }
986 case CFG4ISTAT_INTR:
987 {
988 struct scb *scb;
989 u_int scbid;
990
991 scbid = ahd_get_scbptr(ahd);
992 scb = ahd_lookup_scb(ahd, scbid);
993 if (scb == NULL) {
994 ahd_dump_card_state(ahd);
995 printf("CFG4ISTAT: Free SCB %d referenced", scbid);
996 panic("For safety");
997 }
998 ahd_outq(ahd, HADDR, scb->sense_busaddr);
999 ahd_outw(ahd, HCNT, AHD_SENSE_BUFSIZE);
1000 ahd_outb(ahd, HCNT + 2, 0);
1001 ahd_outb(ahd, SG_CACHE_PRE, SG_LAST_SEG);
1002 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN);
1003 break;
1004 }
1005 case ILLEGAL_PHASE:
1006 {
1007 u_int bus_phase;
1008
1009 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
1010 printf("%s: ILLEGAL_PHASE 0x%x\n",
1011 ahd_name(ahd), bus_phase);
1012
1013 switch (bus_phase) {
1014 case P_DATAOUT:
1015 case P_DATAIN:
1016 case P_DATAOUT_DT:
1017 case P_DATAIN_DT:
1018 case P_MESGOUT:
1019 case P_STATUS:
1020 case P_MESGIN:
1021 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1022 printf("%s: Issued Bus Reset.\n", ahd_name(ahd));
1023 break;
1024 case P_COMMAND:
1025 {
1026 struct ahd_devinfo devinfo;
1027 struct scb *scb;
1028 #ifdef notdef
1029 struct ahd_initiator_tinfo *targ_info;
1030 struct ahd_tmode_tstate *tstate;
1031 #endif
1032 u_int scbid;
1033
1034 /*
1035 * If a target takes us into the command phase
1036 * assume that it has been externally reset and
1037 * has thus lost our previous packetized negotiation
1038 * agreement. Since we have not sent an identify
1039 * message and may not have fully qualified the
1040 * connection, we change our command to TUR, assert
1041 * ATN and ABORT the task when we go to message in
1042 * phase. The OSM will see the REQUEUE_REQUEST
1043 * status and retry the command.
1044 */
1045 scbid = ahd_get_scbptr(ahd);
1046 scb = ahd_lookup_scb(ahd, scbid);
1047 if (scb == NULL) {
1048 printf("Invalid phase with no valid SCB. "
1049 "Resetting bus.\n");
1050 ahd_reset_channel(ahd, 'A',
1051 /*Initiate Reset*/TRUE);
1052 break;
1053 }
1054 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb),
1055 SCB_GET_TARGET(ahd, scb),
1056 SCB_GET_LUN(scb),
1057 SCB_GET_CHANNEL(ahd, scb),
1058 ROLE_INITIATOR);
1059 #ifdef notdef
1060 targ_info = ahd_fetch_transinfo(ahd,
1061 devinfo.channel,
1062 devinfo.our_scsiid,
1063 devinfo.target,
1064 &tstate);
1065 #endif
1066 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
1067 AHD_TRANS_ACTIVE, /*paused*/TRUE);
1068 ahd_set_syncrate(ahd, &devinfo, /*period*/0,
1069 /*offset*/0, /*ppr_options*/0,
1070 AHD_TRANS_ACTIVE, /*paused*/TRUE);
1071 ahd_outb(ahd, SCB_CDB_STORE, 0);
1072 ahd_outb(ahd, SCB_CDB_STORE+1, 0);
1073 ahd_outb(ahd, SCB_CDB_STORE+2, 0);
1074 ahd_outb(ahd, SCB_CDB_STORE+3, 0);
1075 ahd_outb(ahd, SCB_CDB_STORE+4, 0);
1076 ahd_outb(ahd, SCB_CDB_STORE+5, 0);
1077 ahd_outb(ahd, SCB_CDB_LEN, 6);
1078 scb->hscb->control &= ~(TAG_ENB|SCB_TAG_TYPE);
1079 scb->hscb->control |= MK_MESSAGE;
1080 ahd_outb(ahd, SCB_CONTROL, scb->hscb->control);
1081 ahd_outb(ahd, MSG_OUT, HOST_MSG);
1082 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid);
1083 /*
1084 * The lun is 0, regardless of the SCB's lun
1085 * as we have not sent an identify message.
1086 */
1087 ahd_outb(ahd, SAVED_LUN, 0);
1088 ahd_outb(ahd, SEQ_FLAGS, 0);
1089 ahd_assert_atn(ahd);
1090 scb->flags &= ~(SCB_PACKETIZED);
1091 scb->flags |= SCB_ABORT|SCB_CMDPHASE_ABORT;
1092 ahd_freeze_devq(ahd, scb);
1093 ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
1094 ahd_freeze_scb(scb);
1095
1096 /*
1097 * Allow the sequencer to continue with
1098 * non-pack processing.
1099 */
1100 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1101 ahd_outb(ahd, CLRLQOINT1, CLRLQOPHACHGINPKT);
1102 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) {
1103 ahd_outb(ahd, CLRLQOINT1, 0);
1104 }
1105 #ifdef AHD_DEBUG
1106 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
1107 ahd_print_path(ahd, scb);
1108 printf("Unexpected command phase from "
1109 "packetized target\n");
1110 }
1111 #endif
1112 break;
1113 }
1114 }
1115 break;
1116 }
1117 case CFG4OVERRUN:
1118 {
1119 struct scb *scb;
1120 u_int scb_index;
1121
1122 #ifdef AHD_DEBUG
1123 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
1124 printf("%s: CFG4OVERRUN mode = %x\n", ahd_name(ahd),
1125 ahd_inb(ahd, MODE_PTR));
1126 }
1127 #endif
1128 scb_index = ahd_get_scbptr(ahd);
1129 scb = ahd_lookup_scb(ahd, scb_index);
1130 if (scb == NULL) {
1131 /*
1132 * Attempt to transfer to an SCB that is
1133 * not outstanding.
1134 */
1135 ahd_assert_atn(ahd);
1136 ahd_outb(ahd, MSG_OUT, HOST_MSG);
1137 ahd->msgout_buf[0] = MSG_ABORT_TASK;
1138 ahd->msgout_len = 1;
1139 ahd->msgout_index = 0;
1140 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
1141 /*
1142 * Clear status received flag to prevent any
1143 * attempt to complete this bogus SCB.
1144 */
1145 ahd_outb(ahd, SCB_CONTROL,
1146 ahd_inb_scbram(ahd, SCB_CONTROL)
1147 & ~STATUS_RCVD);
1148 }
1149 break;
1150 }
1151 case DUMP_CARD_STATE:
1152 {
1153 ahd_dump_card_state(ahd);
1154 break;
1155 }
1156 case PDATA_REINIT:
1157 {
1158 #ifdef AHD_DEBUG
1159 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
1160 printf("%s: PDATA_REINIT - DFCNTRL = 0x%x "
1161 "SG_CACHE_SHADOW = 0x%x\n",
1162 ahd_name(ahd), ahd_inb(ahd, DFCNTRL),
1163 ahd_inb(ahd, SG_CACHE_SHADOW));
1164 }
1165 #endif
1166 ahd_reinitialize_dataptrs(ahd);
1167 break;
1168 }
1169 case HOST_MSG_LOOP:
1170 {
1171 struct ahd_devinfo devinfo;
1172
1173 /*
1174 * The sequencer has encountered a message phase
1175 * that requires host assistance for completion.
1176 * While handling the message phase(s), we will be
1177 * notified by the sequencer after each byte is
1178 * transferred so we can track bus phase changes.
1179 *
1180 * If this is the first time we've seen a HOST_MSG_LOOP
1181 * interrupt, initialize the state of the host message
1182 * loop.
1183 */
1184 ahd_fetch_devinfo(ahd, &devinfo);
1185 if (ahd->msg_type == MSG_TYPE_NONE) {
1186 struct scb *scb;
1187 u_int scb_index;
1188 u_int bus_phase;
1189
1190 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
1191 if (bus_phase != P_MESGIN
1192 && bus_phase != P_MESGOUT) {
1193 printf("ahd_intr: HOST_MSG_LOOP bad "
1194 "phase 0x%x\n", bus_phase);
1195 /*
1196 * Probably transitioned to bus free before
1197 * we got here. Just punt the message.
1198 */
1199 ahd_dump_card_state(ahd);
1200 ahd_clear_intstat(ahd);
1201 ahd_restart(ahd);
1202 return;
1203 }
1204
1205 scb_index = ahd_get_scbptr(ahd);
1206 scb = ahd_lookup_scb(ahd, scb_index);
1207 if (devinfo.role == ROLE_INITIATOR) {
1208 if (bus_phase == P_MESGOUT)
1209 ahd_setup_initiator_msgout(ahd,
1210 &devinfo,
1211 scb);
1212 else {
1213 ahd->msg_type =
1214 MSG_TYPE_INITIATOR_MSGIN;
1215 ahd->msgin_index = 0;
1216 }
1217 }
1218 #if AHD_TARGET_MODE
1219 else {
1220 if (bus_phase == P_MESGOUT) {
1221 ahd->msg_type =
1222 MSG_TYPE_TARGET_MSGOUT;
1223 ahd->msgin_index = 0;
1224 }
1225 else
1226 ahd_setup_target_msgin(ahd,
1227 &devinfo,
1228 scb);
1229 }
1230 #endif
1231 }
1232
1233 ahd_handle_message_phase(ahd);
1234 break;
1235 }
1236 case NO_MATCH:
1237 {
1238 /* Ensure we don't leave the selection hardware on */
1239 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
1240 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
1241
1242 printf("%s:%c:%d: no active SCB for reconnecting "
1243 "target - issuing BUS DEVICE RESET\n",
1244 ahd_name(ahd), 'A', ahd_inb(ahd, SELID) >> 4);
1245 printf("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, "
1246 "REG0 == 0x%x ACCUM = 0x%x\n",
1247 ahd_inb(ahd, SAVED_SCSIID), ahd_inb(ahd, SAVED_LUN),
1248 ahd_inw(ahd, REG0), ahd_inb(ahd, ACCUM));
1249 printf("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, "
1250 "SINDEX == 0x%x\n",
1251 ahd_inb(ahd, SEQ_FLAGS), ahd_get_scbptr(ahd),
1252 ahd_find_busy_tcl(ahd,
1253 BUILD_TCL(ahd_inb(ahd, SAVED_SCSIID),
1254 ahd_inb(ahd, SAVED_LUN))),
1255 ahd_inw(ahd, SINDEX));
1256 printf("SELID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, "
1257 "SCB_CONTROL == 0x%x\n",
1258 ahd_inb(ahd, SELID), ahd_inb_scbram(ahd, SCB_SCSIID),
1259 ahd_inb_scbram(ahd, SCB_LUN),
1260 ahd_inb_scbram(ahd, SCB_CONTROL));
1261 printf("SCSIBUS[0] == 0x%x, SCSISIGI == 0x%x\n",
1262 ahd_inb(ahd, SCSIBUS), ahd_inb(ahd, SCSISIGI));
1263 printf("SXFRCTL0 == 0x%x\n", ahd_inb(ahd, SXFRCTL0));
1264 printf("SEQCTL0 == 0x%x\n", ahd_inb(ahd, SEQCTL0));
1265 ahd_dump_card_state(ahd);
1266 ahd->msgout_buf[0] = MSG_BUS_DEV_RESET;
1267 ahd->msgout_len = 1;
1268 ahd->msgout_index = 0;
1269 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
1270 ahd_outb(ahd, MSG_OUT, HOST_MSG);
1271 ahd_assert_atn(ahd);
1272 break;
1273 }
1274 case PROTO_VIOLATION:
1275 {
1276 ahd_handle_proto_violation(ahd);
1277 break;
1278 }
1279 case IGN_WIDE_RES:
1280 {
1281 struct ahd_devinfo devinfo;
1282
1283 ahd_fetch_devinfo(ahd, &devinfo);
1284 ahd_handle_ign_wide_residue(ahd, &devinfo);
1285 break;
1286 }
1287 case BAD_PHASE:
1288 {
1289 u_int lastphase;
1290
1291 lastphase = ahd_inb(ahd, LASTPHASE);
1292 printf("%s:%c:%d: unknown scsi bus phase %x, "
1293 "lastphase = 0x%x. Attempting to continue\n",
1294 ahd_name(ahd), 'A',
1295 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)),
1296 lastphase, ahd_inb(ahd, SCSISIGI));
1297 break;
1298 }
1299 case MISSED_BUSFREE:
1300 {
1301 u_int lastphase;
1302
1303 lastphase = ahd_inb(ahd, LASTPHASE);
1304 printf("%s:%c:%d: Missed busfree. "
1305 "Lastphase = 0x%x, Curphase = 0x%x\n",
1306 ahd_name(ahd), 'A',
1307 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)),
1308 lastphase, ahd_inb(ahd, SCSISIGI));
1309 ahd_restart(ahd);
1310 return;
1311 }
1312 case DATA_OVERRUN:
1313 {
1314 /*
1315 * When the sequencer detects an overrun, it
1316 * places the controller in "BITBUCKET" mode
1317 * and allows the target to complete its transfer.
1318 * Unfortunately, none of the counters get updated
1319 * when the controller is in this mode, so we have
1320 * no way of knowing how large the overrun was.
1321 */
1322 struct scb *scb;
1323 u_int scbindex;
1324 #ifdef AHD_DEBUG
1325 u_int lastphase;
1326 #endif
1327
1328 scbindex = ahd_get_scbptr(ahd);
1329 scb = ahd_lookup_scb(ahd, scbindex);
1330 #ifdef AHD_DEBUG
1331 lastphase = ahd_inb(ahd, LASTPHASE);
1332 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
1333 ahd_print_path(ahd, scb);
1334 printf("data overrun detected %s. Tag == 0x%x.\n",
1335 ahd_lookup_phase_entry(lastphase)->phasemsg,
1336 SCB_GET_TAG(scb));
1337 ahd_print_path(ahd, scb);
1338 printf("%s seen Data Phase. Length = %ld. "
1339 "NumSGs = %d.\n",
1340 ahd_inb(ahd, SEQ_FLAGS) & DPHASE
1341 ? "Have" : "Haven't",
1342 ahd_get_transfer_length(scb), scb->sg_count);
1343 ahd_dump_sglist(scb);
1344 }
1345 #endif
1346
1347 /*
1348 * Set this and it will take effect when the
1349 * target does a command complete.
1350 */
1351 ahd_freeze_devq(ahd, scb);
1352 ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
1353 ahd_freeze_scb(scb);
1354 break;
1355 }
1356 case MKMSG_FAILED:
1357 {
1358 struct ahd_devinfo devinfo;
1359 struct scb *scb;
1360 u_int scbid;
1361
1362 ahd_fetch_devinfo(ahd, &devinfo);
1363 printf("%s:%c:%d:%d: Attempt to issue message failed\n",
1364 ahd_name(ahd), devinfo.channel, devinfo.target,
1365 devinfo.lun);
1366 scbid = ahd_get_scbptr(ahd);
1367 scb = ahd_lookup_scb(ahd, scbid);
1368 if (scb != NULL
1369 && (scb->flags & SCB_RECOVERY_SCB) != 0)
1370 /*
1371 * Ensure that we didn't put a second instance of this
1372 * SCB into the QINFIFO.
1373 */
1374 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
1375 SCB_GET_CHANNEL(ahd, scb),
1376 SCB_GET_LUN(scb), SCB_GET_TAG(scb),
1377 ROLE_INITIATOR, /*status*/0,
1378 SEARCH_REMOVE);
1379 ahd_outb(ahd, SCB_CONTROL,
1380 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE);
1381 break;
1382 }
1383 case TASKMGMT_FUNC_COMPLETE:
1384 {
1385 u_int scbid;
1386 struct scb *scb;
1387
1388 scbid = ahd_get_scbptr(ahd);
1389 scb = ahd_lookup_scb(ahd, scbid);
1390 if (scb != NULL) {
1391 u_int lun;
1392 u_int tag;
1393 cam_status error;
1394
1395 ahd_print_path(ahd, scb);
1396 printf("Task Management Func 0x%x Complete\n",
1397 scb->hscb->task_management);
1398 lun = CAM_LUN_WILDCARD;
1399 tag = SCB_LIST_NULL;
1400
1401 switch (scb->hscb->task_management) {
1402 case SIU_TASKMGMT_ABORT_TASK:
1403 tag = SCB_GET_TAG(scb);
1404 /* FALLTHROUGH */
1405 case SIU_TASKMGMT_ABORT_TASK_SET:
1406 case SIU_TASKMGMT_CLEAR_TASK_SET:
1407 lun = scb->hscb->lun;
1408 error = CAM_REQ_ABORTED;
1409 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
1410 'A', lun, tag, ROLE_INITIATOR,
1411 error);
1412 break;
1413 case SIU_TASKMGMT_LUN_RESET:
1414 lun = scb->hscb->lun;
1415 /* FALLTHROUGH */
1416 case SIU_TASKMGMT_TARGET_RESET:
1417 {
1418 struct ahd_devinfo devinfo;
1419
1420 ahd_scb_devinfo(ahd, &devinfo, scb);
1421 error = CAM_BDR_SENT;
1422 ahd_handle_devreset(ahd, &devinfo, lun,
1423 CAM_BDR_SENT,
1424 lun != CAM_LUN_WILDCARD
1425 ? "Lun Reset"
1426 : "Target Reset",
1427 /*verbose_level*/0);
1428 break;
1429 }
1430 default:
1431 panic("Unexpected TaskMgmt Func\n");
1432 break;
1433 }
1434 }
1435 break;
1436 }
1437 case TASKMGMT_CMD_CMPLT_OKAY:
1438 {
1439 u_int scbid;
1440 struct scb *scb;
1441
1442 /*
1443 * An ABORT TASK TMF failed to be delivered before
1444 * the targeted command completed normally.
1445 */
1446 scbid = ahd_get_scbptr(ahd);
1447 scb = ahd_lookup_scb(ahd, scbid);
1448 if (scb != NULL) {
1449 /*
1450 * Remove the second instance of this SCB from
1451 * the QINFIFO if it is still there.
1452 */
1453 ahd_print_path(ahd, scb);
1454 printf("SCB completes before TMF\n");
1455 /*
1456 * Handle losing the race. Wait until any
1457 * current selection completes. We will then
1458 * set the TMF back to zero in this SCB so that
1459 * the sequencer doesn't bother to issue another
1460 * sequencer interrupt for its completion.
1461 */
1462 while ((ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0
1463 && (ahd_inb(ahd, SSTAT0) & SELDO) == 0
1464 && (ahd_inb(ahd, SSTAT1) & SELTO) == 0)
1465 ;
1466 ahd_outb(ahd, SCB_TASK_MANAGEMENT, 0);
1467 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
1468 SCB_GET_CHANNEL(ahd, scb),
1469 SCB_GET_LUN(scb), SCB_GET_TAG(scb),
1470 ROLE_INITIATOR, /*status*/0,
1471 SEARCH_REMOVE);
1472 }
1473 break;
1474 }
1475 case TRACEPOINT0:
1476 case TRACEPOINT1:
1477 case TRACEPOINT2:
1478 case TRACEPOINT3:
1479 printf("%s: Tracepoint %d\n", ahd_name(ahd),
1480 seqintcode - TRACEPOINT0);
1481 break;
1482 case NO_SEQINT:
1483 break;
1484 case SAW_HWERR:
1485 ahd_handle_hwerrint(ahd);
1486 break;
1487 default:
1488 printf("%s: Unexpected SEQINTCODE %d\n", ahd_name(ahd),
1489 seqintcode);
1490 break;
1491 }
1492 /*
1493 * The sequencer is paused immediately on
1494 * a SEQINT, so we should restart it when
1495 * we're done.
1496 */
1497 ahd_unpause(ahd);
1498 }
1499
1500 void
ahd_handle_scsiint(struct ahd_softc * ahd,u_int intstat)1501 ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat)
1502 {
1503 struct scb *scb;
1504 u_int status0;
1505 u_int status3;
1506 u_int status;
1507 u_int lqistat1;
1508 u_int lqostat0;
1509 u_int scbid;
1510 u_int busfreetime;
1511
1512 ahd_update_modes(ahd);
1513 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1514
1515 status3 = ahd_inb(ahd, SSTAT3) & (NTRAMPERR|OSRAMPERR);
1516 status0 = ahd_inb(ahd, SSTAT0) & (IOERR|OVERRUN|SELDI|SELDO);
1517 status = ahd_inb(ahd, SSTAT1) & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR);
1518 lqistat1 = ahd_inb(ahd, LQISTAT1);
1519 lqostat0 = ahd_inb(ahd, LQOSTAT0);
1520 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME;
1521 if ((status0 & (SELDI|SELDO)) != 0) {
1522 u_int simode0;
1523
1524 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
1525 simode0 = ahd_inb(ahd, SIMODE0);
1526 status0 &= simode0 & (IOERR|OVERRUN|SELDI|SELDO);
1527 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1528 }
1529 scbid = ahd_get_scbptr(ahd);
1530 scb = ahd_lookup_scb(ahd, scbid);
1531 if (scb != NULL
1532 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0)
1533 scb = NULL;
1534
1535 /* Make sure the sequencer is in a safe location. */
1536 ahd_clear_critical_section(ahd);
1537
1538 if ((status0 & IOERR) != 0) {
1539 u_int now_lvd;
1540
1541 now_lvd = ahd_inb(ahd, SBLKCTL) & ENAB40;
1542 printf("%s: Transceiver State Has Changed to %s mode\n",
1543 ahd_name(ahd), now_lvd ? "LVD" : "SE");
1544 ahd_outb(ahd, CLRSINT0, CLRIOERR);
1545 /*
1546 * A change in I/O mode is equivalent to a bus reset.
1547 */
1548 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1549 ahd_pause(ahd);
1550 ahd_setup_iocell_workaround(ahd);
1551 ahd_unpause(ahd);
1552 } else if ((status0 & OVERRUN) != 0) {
1553 printf("%s: SCSI offset overrun detected. Resetting bus.\n",
1554 ahd_name(ahd));
1555 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1556 } else if ((status & SCSIRSTI) != 0) {
1557 printf("%s: Someone reset channel A\n", ahd_name(ahd));
1558 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/FALSE);
1559 } else if ((status & SCSIPERR) != 0) {
1560 ahd_handle_transmission_error(ahd);
1561 } else if (lqostat0 != 0) {
1562 printf("%s: lqostat0 == 0x%x!\n", ahd_name(ahd), lqostat0);
1563 ahd_outb(ahd, CLRLQOINT0, lqostat0);
1564 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) {
1565 ahd_outb(ahd, CLRLQOINT1, 0);
1566 }
1567 } else if ((status & SELTO) != 0) {
1568 u_int scbid1;
1569
1570 /* Stop the selection */
1571 ahd_outb(ahd, SCSISEQ0, 0);
1572
1573 /* No more pending messages */
1574 ahd_clear_msg_state(ahd);
1575
1576 /* Clear interrupt state */
1577 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR);
1578
1579 /*
1580 * Although the driver does not care about the
1581 * 'Selection in Progress' status bit, the busy
1582 * LED does. SELINGO is only cleared by a successful
1583 * selection, so we must manually clear it to insure
1584 * the LED turns off just incase no future successful
1585 * selections occur (e.g. no devices on the bus).
1586 */
1587 ahd_outb(ahd, CLRSINT0, CLRSELINGO);
1588
1589 scbid1 = ahd_inw(ahd, WAITING_TID_HEAD);
1590 scb = ahd_lookup_scb(ahd, scbid1);
1591 if (scb == NULL) {
1592 printf("%s: ahd_intr - referenced scb not "
1593 "valid during SELTO scb(0x%x)\n",
1594 ahd_name(ahd), scbid1);
1595 ahd_dump_card_state(ahd);
1596 } else {
1597 struct ahd_devinfo devinfo;
1598 #ifdef AHD_DEBUG
1599 if ((ahd_debug & AHD_SHOW_SELTO) != 0) {
1600 ahd_print_path(ahd, scb);
1601 printf("Saw Selection Timeout for SCB 0x%x\n",
1602 scbid1);
1603 }
1604 #endif
1605 /*
1606 * Force a renegotiation with this target just in
1607 * case the cable was pulled and will later be
1608 * re-attached. The target may forget its negotiation
1609 * settings with us should it attempt to reselect
1610 * during the interruption. The target will not issue
1611 * a unit attention in this case, so we must always
1612 * renegotiate.
1613 */
1614 ahd_scb_devinfo(ahd, &devinfo, scb);
1615 ahd_force_renegotiation(ahd, &devinfo);
1616 ahd_set_transaction_status(scb, CAM_SEL_TIMEOUT);
1617 ahd_freeze_devq(ahd, scb);
1618 }
1619 ahd_outb(ahd, CLRINT, CLRSCSIINT);
1620 ahd_iocell_first_selection(ahd);
1621 ahd_unpause(ahd);
1622 } else if ((status0 & (SELDI|SELDO)) != 0) {
1623 ahd_iocell_first_selection(ahd);
1624 ahd_unpause(ahd);
1625 } else if (status3 != 0) {
1626 printf("%s: SCSI Cell parity error SSTAT3 == 0x%x\n",
1627 ahd_name(ahd), status3);
1628 ahd_outb(ahd, CLRSINT3, status3);
1629 } else if ((lqistat1 & (LQIPHASE_LQ|LQIPHASE_NLQ)) != 0) {
1630 ahd_handle_lqiphase_error(ahd, lqistat1);
1631 } else if ((lqistat1 & LQICRCI_NLQ) != 0) {
1632 /*
1633 * This status can be delayed during some
1634 * streaming operations. The SCSIPHASE
1635 * handler has already dealt with this case
1636 * so just clear the error.
1637 */
1638 ahd_outb(ahd, CLRLQIINT1, CLRLQICRCI_NLQ);
1639 } else if ((status & BUSFREE) != 0) {
1640 u_int lqostat1;
1641 int restart;
1642 int clear_fifo;
1643 int packetized;
1644 u_int mode;
1645
1646 /*
1647 * Clear our selection hardware as soon as possible.
1648 * We may have an entry in the waiting Q for this target,
1649 * that is affected by this busfree and we don't want to
1650 * go about selecting the target while we handle the event.
1651 */
1652 ahd_outb(ahd, SCSISEQ0, 0);
1653
1654 /*
1655 * Determine what we were up to at the time of
1656 * the busfree.
1657 */
1658 mode = AHD_MODE_SCSI;
1659 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME;
1660 lqostat1 = ahd_inb(ahd, LQOSTAT1);
1661 switch (busfreetime) {
1662 case BUSFREE_DFF0:
1663 case BUSFREE_DFF1:
1664 {
1665 u_int scbid1;
1666 struct scb *scb1;
1667
1668 mode = busfreetime == BUSFREE_DFF0
1669 ? AHD_MODE_DFF0 : AHD_MODE_DFF1;
1670 ahd_set_modes(ahd, mode, mode);
1671 scbid1 = ahd_get_scbptr(ahd);
1672 scb1 = ahd_lookup_scb(ahd, scbid1);
1673 if (scb1 == NULL) {
1674 printf("%s: Invalid SCB %d in DFF%d "
1675 "during unexpected busfree\n",
1676 ahd_name(ahd), scbid1, mode);
1677 packetized = 0;
1678 } else
1679 packetized =
1680 (scb1->flags & SCB_PACKETIZED) != 0;
1681 clear_fifo = 1;
1682 break;
1683 }
1684 case BUSFREE_LQO:
1685 clear_fifo = 0;
1686 packetized = 1;
1687 break;
1688 default:
1689 clear_fifo = 0;
1690 packetized = (lqostat1 & LQOBUSFREE) != 0;
1691 if (!packetized
1692 && ahd_inb(ahd, LASTPHASE) == P_BUSFREE)
1693 packetized = 1;
1694 break;
1695 }
1696
1697 #ifdef AHD_DEBUG
1698 if ((ahd_debug & AHD_SHOW_MISC) != 0)
1699 printf("Saw Busfree. Busfreetime = 0x%x.\n",
1700 busfreetime);
1701 #endif
1702 /*
1703 * Busfrees that occur in non-packetized phases are
1704 * handled by the nonpkt_busfree handler.
1705 */
1706 if (packetized && ahd_inb(ahd, LASTPHASE) == P_BUSFREE) {
1707 restart = ahd_handle_pkt_busfree(ahd, busfreetime);
1708 } else {
1709 packetized = 0;
1710 restart = ahd_handle_nonpkt_busfree(ahd);
1711 }
1712 /*
1713 * Clear the busfree interrupt status. The setting of
1714 * the interrupt is a pulse, so in a perfect world, we
1715 * would not need to muck with the ENBUSFREE logic. This
1716 * would ensure that if the bus moves on to another
1717 * connection, busfree protection is still in force. If
1718 * BUSFREEREV is broken, however, we must manually clear
1719 * the ENBUSFREE if the busfree occurred during a non-pack
1720 * connection so that we don't get false positives during
1721 * future, packetized, connections.
1722 */
1723 ahd_outb(ahd, CLRSINT1, CLRBUSFREE);
1724 if (packetized == 0
1725 && (ahd->bugs & AHD_BUSFREEREV_BUG) != 0)
1726 ahd_outb(ahd, SIMODE1,
1727 ahd_inb(ahd, SIMODE1) & ~ENBUSFREE);
1728
1729 if (clear_fifo)
1730 ahd_clear_fifo(ahd, mode);
1731
1732 ahd_clear_msg_state(ahd);
1733 ahd_outb(ahd, CLRINT, CLRSCSIINT);
1734 if (restart) {
1735 ahd_restart(ahd);
1736 } else {
1737 ahd_unpause(ahd);
1738 }
1739 } else {
1740 printf("%s: Missing case in ahd_handle_scsiint. status = %x\n",
1741 ahd_name(ahd), status);
1742 ahd_dump_card_state(ahd);
1743 ahd_clear_intstat(ahd);
1744 ahd_unpause(ahd);
1745 }
1746 }
1747
1748 static void
ahd_handle_transmission_error(struct ahd_softc * ahd)1749 ahd_handle_transmission_error(struct ahd_softc *ahd)
1750 {
1751 struct scb *scb;
1752 u_int scbid;
1753 u_int lqistat1;
1754 u_int msg_out;
1755 u_int curphase;
1756 u_int lastphase;
1757 u_int perrdiag;
1758 u_int cur_col;
1759 int silent;
1760
1761 scb = NULL;
1762 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1763 lqistat1 = ahd_inb(ahd, LQISTAT1) & ~(LQIPHASE_LQ|LQIPHASE_NLQ);
1764 (void)ahd_inb(ahd, LQISTAT2);
1765 if ((lqistat1 & (LQICRCI_NLQ|LQICRCI_LQ)) == 0
1766 && (ahd->bugs & AHD_NLQICRC_DELAYED_BUG) != 0) {
1767 u_int lqistate;
1768
1769 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
1770 lqistate = ahd_inb(ahd, LQISTATE);
1771 if ((lqistate >= 0x1E && lqistate <= 0x24)
1772 || (lqistate == 0x29)) {
1773 #ifdef AHD_DEBUG
1774 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
1775 printf("%s: NLQCRC found via LQISTATE\n",
1776 ahd_name(ahd));
1777 }
1778 #endif
1779 lqistat1 |= LQICRCI_NLQ;
1780 }
1781 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1782 }
1783
1784 ahd_outb(ahd, CLRLQIINT1, lqistat1);
1785 lastphase = ahd_inb(ahd, LASTPHASE);
1786 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
1787 perrdiag = ahd_inb(ahd, PERRDIAG);
1788 msg_out = MSG_INITIATOR_DET_ERR;
1789 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR);
1790
1791 /*
1792 * Try to find the SCB associated with this error.
1793 */
1794 silent = FALSE;
1795 if (lqistat1 == 0
1796 || (lqistat1 & LQICRCI_NLQ) != 0) {
1797 if ((lqistat1 & (LQICRCI_NLQ|LQIOVERI_NLQ)) != 0)
1798 ahd_set_active_fifo(ahd);
1799 scbid = ahd_get_scbptr(ahd);
1800 scb = ahd_lookup_scb(ahd, scbid);
1801 if (scb != NULL && SCB_IS_SILENT(scb))
1802 silent = TRUE;
1803 }
1804
1805 cur_col = 0;
1806 if (silent == FALSE) {
1807 printf("%s: Transmission error detected\n", ahd_name(ahd));
1808 ahd_lqistat1_print(lqistat1, &cur_col, 50);
1809 ahd_lastphase_print(lastphase, &cur_col, 50);
1810 ahd_scsisigi_print(curphase, &cur_col, 50);
1811 ahd_perrdiag_print(perrdiag, &cur_col, 50);
1812 printf("\n");
1813 ahd_dump_card_state(ahd);
1814 }
1815
1816 if ((lqistat1 & (LQIOVERI_LQ|LQIOVERI_NLQ)) != 0) {
1817 if (silent == FALSE) {
1818 printf("%s: Gross protocol error during incoming "
1819 "packet. lqistat1 == 0x%x. Resetting bus.\n",
1820 ahd_name(ahd), lqistat1);
1821 }
1822 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1823 return;
1824 } else if ((lqistat1 & LQICRCI_LQ) != 0) {
1825 /*
1826 * A CRC error has been detected on an incoming LQ.
1827 * The bus is currently hung on the last ACK.
1828 * Hit LQIRETRY to release the last ack, and
1829 * wait for the sequencer to determine that ATNO
1830 * is asserted while in message out to take us
1831 * to our host message loop. No NONPACKREQ or
1832 * LQIPHASE type errors will occur in this
1833 * scenario. After this first LQIRETRY, the LQI
1834 * manager will be in ISELO where it will
1835 * happily sit until another packet phase begins.
1836 * Unexpected bus free detection is enabled
1837 * through any phases that occur after we release
1838 * this last ack until the LQI manager sees a
1839 * packet phase. This implies we may have to
1840 * ignore a perfectly valid "unexpected busfree"
1841 * after our "initiator detected error" message is
1842 * sent. A busfree is the expected response after
1843 * we tell the target that its L_Q was corrupted.
1844 * (SPI4R09 10.7.3.3.3)
1845 */
1846 ahd_outb(ahd, LQCTL2, LQIRETRY);
1847 printf("LQIRetry for LQICRCI_LQ to release ACK\n");
1848 } else if ((lqistat1 & LQICRCI_NLQ) != 0) {
1849 /*
1850 * We detected a CRC error in a NON-LQ packet.
1851 * The hardware has varying behavior in this situation
1852 * depending on whether this packet was part of a
1853 * stream or not.
1854 *
1855 * PKT by PKT mode:
1856 * The hardware has already acked the complete packet.
1857 * If the target honors our outstanding ATN condition,
1858 * we should be (or soon will be) in MSGOUT phase.
1859 * This will trigger the LQIPHASE_LQ status bit as the
1860 * hardware was expecting another LQ. Unexpected
1861 * busfree detection is enabled. Once LQIPHASE_LQ is
1862 * true (first entry into host message loop is much
1863 * the same), we must clear LQIPHASE_LQ and hit
1864 * LQIRETRY so the hardware is ready to handle
1865 * a future LQ. NONPACKREQ will not be asserted again
1866 * once we hit LQIRETRY until another packet is
1867 * processed. The target may either go busfree
1868 * or start another packet in response to our message.
1869 *
1870 * Read Streaming P0 asserted:
1871 * If we raise ATN and the target completes the entire
1872 * stream (P0 asserted during the last packet), the
1873 * hardware will ack all data and return to the ISTART
1874 * state. When the target reponds to our ATN condition,
1875 * LQIPHASE_LQ will be asserted. We should respond to
1876 * this with an LQIRETRY to prepare for any future
1877 * packets. NONPACKREQ will not be asserted again
1878 * once we hit LQIRETRY until another packet is
1879 * processed. The target may either go busfree or
1880 * start another packet in response to our message.
1881 * Busfree detection is enabled.
1882 *
1883 * Read Streaming P0 not asserted:
1884 * If we raise ATN and the target transitions to
1885 * MSGOUT in or after a packet where P0 is not
1886 * asserted, the hardware will assert LQIPHASE_NLQ.
1887 * We should respond to the LQIPHASE_NLQ with an
1888 * LQIRETRY. Should the target stay in a non-pkt
1889 * phase after we send our message, the hardware
1890 * will assert LQIPHASE_LQ. Recovery is then just as
1891 * listed above for the read streaming with P0 asserted.
1892 * Busfree detection is enabled.
1893 */
1894 if (silent == FALSE)
1895 printf("LQICRC_NLQ\n");
1896 if (scb == NULL) {
1897 printf("%s: No SCB valid for LQICRC_NLQ. "
1898 "Resetting bus\n", ahd_name(ahd));
1899 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1900 return;
1901 }
1902 } else if ((lqistat1 & LQIBADLQI) != 0) {
1903 printf("Need to handle BADLQI!\n");
1904 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1905 return;
1906 } else if ((perrdiag & (PARITYERR|PREVPHASE)) == PARITYERR) {
1907 if ((curphase & ~P_DATAIN_DT) != 0) {
1908 /* Ack the byte. So we can continue. */
1909 if (silent == FALSE)
1910 printf("Acking %s to clear perror\n",
1911 ahd_lookup_phase_entry(curphase)->phasemsg);
1912 ahd_inb(ahd, SCSIDAT);
1913 }
1914
1915 if (curphase == P_MESGIN)
1916 msg_out = MSG_PARITY_ERROR;
1917 }
1918
1919 /*
1920 * We've set the hardware to assert ATN if we
1921 * get a parity error on "in" phases, so all we
1922 * need to do is stuff the message buffer with
1923 * the appropriate message. "In" phases have set
1924 * mesg_out to something other than MSG_NOP.
1925 */
1926 ahd->send_msg_perror = msg_out;
1927 if (scb != NULL && msg_out == MSG_INITIATOR_DET_ERR)
1928 scb->flags |= SCB_TRANSMISSION_ERROR;
1929 ahd_outb(ahd, MSG_OUT, HOST_MSG);
1930 ahd_outb(ahd, CLRINT, CLRSCSIINT);
1931 ahd_unpause(ahd);
1932 }
1933
1934 static void
ahd_handle_lqiphase_error(struct ahd_softc * ahd,u_int lqistat1)1935 ahd_handle_lqiphase_error(struct ahd_softc *ahd, u_int lqistat1)
1936 {
1937 /*
1938 * Clear the sources of the interrupts.
1939 */
1940 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1941 ahd_outb(ahd, CLRLQIINT1, lqistat1);
1942
1943 /*
1944 * If the "illegal" phase changes were in response
1945 * to our ATN to flag a CRC error, AND we ended up
1946 * on packet boundaries, clear the error, restart the
1947 * LQI manager as appropriate, and go on our merry
1948 * way toward sending the message. Otherwise, reset
1949 * the bus to clear the error.
1950 */
1951 ahd_set_active_fifo(ahd);
1952 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0
1953 && (ahd_inb(ahd, MDFFSTAT) & DLZERO) != 0) {
1954 if ((lqistat1 & LQIPHASE_LQ) != 0) {
1955 printf("LQIRETRY for LQIPHASE_LQ\n");
1956 ahd_outb(ahd, LQCTL2, LQIRETRY);
1957 } else if ((lqistat1 & LQIPHASE_NLQ) != 0) {
1958 printf("LQIRETRY for LQIPHASE_NLQ\n");
1959 ahd_outb(ahd, LQCTL2, LQIRETRY);
1960 } else
1961 panic("ahd_handle_lqiphase_error: No phase errors\n");
1962 ahd_dump_card_state(ahd);
1963 ahd_outb(ahd, CLRINT, CLRSCSIINT);
1964 ahd_unpause(ahd);
1965 } else {
1966 printf("Resetting Channel for LQI Phase error\n");
1967 ahd_dump_card_state(ahd);
1968 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1969 }
1970 }
1971
1972 /*
1973 * Packetized unexpected or expected busfree.
1974 * Entered in mode based on busfreetime.
1975 */
1976 static int
ahd_handle_pkt_busfree(struct ahd_softc * ahd,u_int busfreetime)1977 ahd_handle_pkt_busfree(struct ahd_softc *ahd, u_int busfreetime)
1978 {
1979 u_int lqostat1;
1980
1981 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
1982 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
1983 lqostat1 = ahd_inb(ahd, LQOSTAT1);
1984 if ((lqostat1 & LQOBUSFREE) != 0) {
1985 struct scb *scb;
1986 u_int scbid;
1987 u_int saved_scbptr;
1988 u_int waiting_h;
1989 u_int waiting_t;
1990 u_int next;
1991
1992 if ((busfreetime & BUSFREE_LQO) == 0)
1993 printf("%s: Warning, BUSFREE time is 0x%x. "
1994 "Expected BUSFREE_LQO.\n",
1995 ahd_name(ahd), busfreetime);
1996 /*
1997 * The LQO manager detected an unexpected busfree
1998 * either:
1999 *
2000 * 1) During an outgoing LQ.
2001 * 2) After an outgoing LQ but before the first
2002 * REQ of the command packet.
2003 * 3) During an outgoing command packet.
2004 *
2005 * In all cases, CURRSCB is pointing to the
2006 * SCB that encountered the failure. Clean
2007 * up the queue, clear SELDO and LQOBUSFREE,
2008 * and allow the sequencer to restart the select
2009 * out at its lesure.
2010 */
2011 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2012 scbid = ahd_inw(ahd, CURRSCB);
2013 scb = ahd_lookup_scb(ahd, scbid);
2014 if (scb == NULL)
2015 panic("SCB not valid during LQOBUSFREE");
2016 /*
2017 * Clear the status.
2018 */
2019 ahd_outb(ahd, CLRLQOINT1, CLRLQOBUSFREE);
2020 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0)
2021 ahd_outb(ahd, CLRLQOINT1, 0);
2022 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
2023 ahd_flush_device_writes(ahd);
2024 ahd_outb(ahd, CLRSINT0, CLRSELDO);
2025
2026 /*
2027 * Return the LQO manager to its idle loop. It will
2028 * not do this automatically if the busfree occurs
2029 * after the first REQ of either the LQ or command
2030 * packet or between the LQ and command packet.
2031 */
2032 ahd_outb(ahd, LQCTL2, ahd_inb(ahd, LQCTL2) | LQOTOIDLE);
2033
2034 /*
2035 * Update the waiting for selection queue so
2036 * we restart on the correct SCB.
2037 */
2038 waiting_h = ahd_inw(ahd, WAITING_TID_HEAD);
2039 saved_scbptr = ahd_get_scbptr(ahd);
2040 if (waiting_h != scbid) {
2041
2042 ahd_outw(ahd, WAITING_TID_HEAD, scbid);
2043 waiting_t = ahd_inw(ahd, WAITING_TID_TAIL);
2044 if (waiting_t == waiting_h) {
2045 ahd_outw(ahd, WAITING_TID_TAIL, scbid);
2046 next = SCB_LIST_NULL;
2047 } else {
2048 ahd_set_scbptr(ahd, waiting_h);
2049 next = ahd_inw_scbram(ahd, SCB_NEXT2);
2050 }
2051 ahd_set_scbptr(ahd, scbid);
2052 ahd_outw(ahd, SCB_NEXT2, next);
2053 }
2054 ahd_set_scbptr(ahd, saved_scbptr);
2055 if (scb->crc_retry_count < AHD_MAX_LQ_CRC_ERRORS) {
2056 if (SCB_IS_SILENT(scb) == FALSE) {
2057 ahd_print_path(ahd, scb);
2058 printf("Probable outgoing LQ CRC error. "
2059 "Retrying command\n");
2060 }
2061 scb->crc_retry_count++;
2062 } else {
2063 ahd_set_transaction_status(scb, CAM_UNCOR_PARITY);
2064 ahd_freeze_scb(scb);
2065 ahd_freeze_devq(ahd, scb);
2066 }
2067 /* Return unpausing the sequencer. */
2068 return (0);
2069 } else if ((ahd_inb(ahd, PERRDIAG) & PARITYERR) != 0) {
2070 /*
2071 * Ignore what are really parity errors that
2072 * occur on the last REQ of a free running
2073 * clock prior to going busfree. Some drives
2074 * do not properly active negate just before
2075 * going busfree resulting in a parity glitch.
2076 */
2077 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR|CLRBUSFREE);
2078 #ifdef AHD_DEBUG
2079 if ((ahd_debug & AHD_SHOW_MASKED_ERRORS) != 0)
2080 printf("%s: Parity on last REQ detected "
2081 "during busfree phase.\n",
2082 ahd_name(ahd));
2083 #endif
2084 /* Return unpausing the sequencer. */
2085 return (0);
2086 }
2087 if (ahd->src_mode != AHD_MODE_SCSI) {
2088 u_int scbid;
2089 struct scb *scb;
2090
2091 scbid = ahd_get_scbptr(ahd);
2092 scb = ahd_lookup_scb(ahd, scbid);
2093 ahd_print_path(ahd, scb);
2094 printf("Unexpected PKT busfree condition\n");
2095 ahd_dump_card_state(ahd);
2096 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 'A',
2097 SCB_GET_LUN(scb), SCB_GET_TAG(scb),
2098 ROLE_INITIATOR, CAM_UNEXP_BUSFREE);
2099
2100 /* Return restarting the sequencer. */
2101 return (1);
2102 }
2103 printf("%s: Unexpected PKT busfree condition\n", ahd_name(ahd));
2104 ahd_dump_card_state(ahd);
2105 /* Restart the sequencer. */
2106 return (1);
2107 }
2108
2109 /*
2110 * Non-packetized unexpected or expected busfree.
2111 */
2112 static int
ahd_handle_nonpkt_busfree(struct ahd_softc * ahd)2113 ahd_handle_nonpkt_busfree(struct ahd_softc *ahd)
2114 {
2115 struct ahd_devinfo devinfo;
2116 struct scb *scb;
2117 u_int lastphase;
2118 u_int saved_scsiid;
2119 u_int saved_lun;
2120 u_int target;
2121 u_int initiator_role_id;
2122 u_int scbid;
2123 u_int ppr_busfree;
2124 int printerror;
2125
2126 /*
2127 * Look at what phase we were last in. If its message out,
2128 * chances are pretty good that the busfree was in response
2129 * to one of our abort requests.
2130 */
2131 lastphase = ahd_inb(ahd, LASTPHASE);
2132 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
2133 saved_lun = ahd_inb(ahd, SAVED_LUN);
2134 target = SCSIID_TARGET(ahd, saved_scsiid);
2135 initiator_role_id = SCSIID_OUR_ID(saved_scsiid);
2136 ahd_compile_devinfo(&devinfo, initiator_role_id,
2137 target, saved_lun, 'A', ROLE_INITIATOR);
2138 printerror = 1;
2139
2140 scbid = ahd_get_scbptr(ahd);
2141 scb = ahd_lookup_scb(ahd, scbid);
2142 if (scb != NULL
2143 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0)
2144 scb = NULL;
2145
2146 ppr_busfree = (ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0;
2147 if (lastphase == P_MESGOUT) {
2148 u_int tag;
2149
2150 tag = SCB_LIST_NULL;
2151 if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT_TAG, TRUE)
2152 || ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT, TRUE)) {
2153 int found;
2154 int sent_msg;
2155
2156 if (scb == NULL) {
2157 ahd_print_devinfo(ahd, &devinfo);
2158 printf("Abort for unidentified "
2159 "connection completed.\n");
2160 /* restart the sequencer. */
2161 return (1);
2162 }
2163 sent_msg = ahd->msgout_buf[ahd->msgout_index - 1];
2164 ahd_print_path(ahd, scb);
2165 printf("SCB %d - Abort%s Completed.\n",
2166 SCB_GET_TAG(scb),
2167 sent_msg == MSG_ABORT_TAG ? "" : " Tag");
2168
2169 if (sent_msg == MSG_ABORT_TAG)
2170 tag = SCB_GET_TAG(scb);
2171
2172 if ((scb->flags & SCB_CMDPHASE_ABORT) != 0) {
2173 /*
2174 * This abort is in response to an
2175 * unexpected switch to command phase
2176 * for a packetized connection. Since
2177 * the identify message was never sent,
2178 * "saved lun" is 0. We really want to
2179 * abort only the SCB that encountered
2180 * this error, which could have a different
2181 * lun. The SCB will be retried so the OS
2182 * will see the UA after renegotiating to
2183 * packetized.
2184 */
2185 tag = SCB_GET_TAG(scb);
2186 saved_lun = scb->hscb->lun;
2187 }
2188 found = ahd_abort_scbs(ahd, target, 'A', saved_lun,
2189 tag, ROLE_INITIATOR,
2190 CAM_REQ_ABORTED);
2191 printf("found == 0x%x\n", found);
2192 printerror = 0;
2193 } else if (ahd_sent_msg(ahd, AHDMSG_1B,
2194 MSG_BUS_DEV_RESET, TRUE)) {
2195 #ifdef __FreeBSD__
2196 /*
2197 * Don't mark the user's request for this BDR
2198 * as completing with CAM_BDR_SENT. CAM3
2199 * specifies CAM_REQ_CMP.
2200 */
2201 if (scb != NULL
2202 && scb->io_ctx->ccb_h.func_code== XPT_RESET_DEV
2203 && ahd_match_scb(ahd, scb, target, 'A',
2204 CAM_LUN_WILDCARD, SCB_LIST_NULL,
2205 ROLE_INITIATOR))
2206 ahd_set_transaction_status(scb, CAM_REQ_CMP);
2207 #endif
2208 ahd_handle_devreset(ahd, &devinfo, CAM_LUN_WILDCARD,
2209 CAM_BDR_SENT, "Bus Device Reset",
2210 /*verbose_level*/0);
2211 printerror = 0;
2212 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, FALSE)
2213 && ppr_busfree == 0) {
2214 struct ahd_initiator_tinfo *tinfo;
2215 struct ahd_tmode_tstate *tstate;
2216
2217 /*
2218 * PPR Rejected. Try non-ppr negotiation
2219 * and retry command.
2220 */
2221 #ifdef AHD_DEBUG
2222 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2223 printf("PPR negotiation rejected busfree.\n");
2224 #endif
2225 tinfo = ahd_fetch_transinfo(ahd, devinfo.channel,
2226 devinfo.our_scsiid,
2227 devinfo.target, &tstate);
2228 tinfo->curr.transport_version = 2;
2229 tinfo->goal.transport_version = 2;
2230 tinfo->goal.ppr_options = 0;
2231 ahd_qinfifo_requeue_tail(ahd, scb);
2232 printerror = 0;
2233 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE)
2234 && ppr_busfree == 0) {
2235 /*
2236 * Negotiation Rejected. Go-narrow and
2237 * retry command.
2238 */
2239 #ifdef AHD_DEBUG
2240 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2241 printf("WDTR Negotiation rejected busfree.\n");
2242 #endif
2243 ahd_set_width(ahd, &devinfo,
2244 MSG_EXT_WDTR_BUS_8_BIT,
2245 AHD_TRANS_CUR|AHD_TRANS_GOAL,
2246 /*paused*/TRUE);
2247 ahd_qinfifo_requeue_tail(ahd, scb);
2248 printerror = 0;
2249 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE)
2250 && ppr_busfree == 0) {
2251 /*
2252 * Negotiation Rejected. Go-async and
2253 * retry command.
2254 */
2255 #ifdef AHD_DEBUG
2256 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2257 printf("SDTR negotiation rejected busfree.\n");
2258 #endif
2259 ahd_set_syncrate(ahd, &devinfo,
2260 /*period*/0, /*offset*/0,
2261 /*ppr_options*/0,
2262 AHD_TRANS_CUR|AHD_TRANS_GOAL,
2263 /*paused*/TRUE);
2264 ahd_qinfifo_requeue_tail(ahd, scb);
2265 printerror = 0;
2266 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0
2267 && ahd_sent_msg(ahd, AHDMSG_1B,
2268 MSG_INITIATOR_DET_ERR, TRUE)) {
2269
2270 #ifdef AHD_DEBUG
2271 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2272 printf("Expected IDE Busfree\n");
2273 #endif
2274 printerror = 0;
2275 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_QASREJ_BUSFREE)
2276 && ahd_sent_msg(ahd, AHDMSG_1B,
2277 MSG_MESSAGE_REJECT, TRUE)) {
2278
2279 #ifdef AHD_DEBUG
2280 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2281 printf("Expected QAS Reject Busfree\n");
2282 #endif
2283 printerror = 0;
2284 }
2285 }
2286
2287 /*
2288 * The busfree required flag is honored at the end of
2289 * the message phases. We check it last in case we
2290 * had to send some other message that caused a busfree.
2291 */
2292 if (printerror != 0
2293 && (lastphase == P_MESGIN || lastphase == P_MESGOUT)
2294 && ((ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0)) {
2295
2296 ahd_freeze_devq(ahd, scb);
2297 ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
2298 ahd_freeze_scb(scb);
2299 if ((ahd->msg_flags & MSG_FLAG_IU_REQ_CHANGED) != 0) {
2300 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
2301 SCB_GET_CHANNEL(ahd, scb),
2302 SCB_GET_LUN(scb), SCB_LIST_NULL,
2303 ROLE_INITIATOR, CAM_REQ_ABORTED);
2304 } else {
2305 #ifdef AHD_DEBUG
2306 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2307 printf("PPR Negotiation Busfree.\n");
2308 #endif
2309 ahd_done(ahd, scb);
2310 }
2311 printerror = 0;
2312 }
2313 if (printerror != 0) {
2314 int aborted;
2315
2316 aborted = 0;
2317 if (scb != NULL) {
2318 u_int tag;
2319
2320 if ((scb->hscb->control & TAG_ENB) != 0)
2321 tag = SCB_GET_TAG(scb);
2322 else
2323 tag = SCB_LIST_NULL;
2324 ahd_print_path(ahd, scb);
2325 aborted = ahd_abort_scbs(ahd, target, 'A',
2326 SCB_GET_LUN(scb), tag,
2327 ROLE_INITIATOR,
2328 CAM_UNEXP_BUSFREE);
2329 } else {
2330 /*
2331 * We had not fully identified this connection,
2332 * so we cannot abort anything.
2333 */
2334 printf("%s: ", ahd_name(ahd));
2335 }
2336 if (lastphase != P_BUSFREE)
2337 ahd_force_renegotiation(ahd, &devinfo);
2338 printf("Unexpected busfree %s, %d SCBs aborted, "
2339 "PRGMCNT == 0x%x\n",
2340 ahd_lookup_phase_entry(lastphase)->phasemsg,
2341 aborted,
2342 ahd_inb(ahd, PRGMCNT)
2343 | (ahd_inb(ahd, PRGMCNT+1) << 8));
2344 ahd_dump_card_state(ahd);
2345 }
2346 /* Always restart the sequencer. */
2347 return (1);
2348 }
2349
2350 static void
ahd_handle_proto_violation(struct ahd_softc * ahd)2351 ahd_handle_proto_violation(struct ahd_softc *ahd)
2352 {
2353 struct ahd_devinfo devinfo;
2354 struct scb *scb;
2355 u_int scbid;
2356 u_int seq_flags;
2357 u_int curphase;
2358 u_int lastphase;
2359 int found;
2360
2361 ahd_fetch_devinfo(ahd, &devinfo);
2362 scbid = ahd_get_scbptr(ahd);
2363 scb = ahd_lookup_scb(ahd, scbid);
2364 seq_flags = ahd_inb(ahd, SEQ_FLAGS);
2365 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
2366 lastphase = ahd_inb(ahd, LASTPHASE);
2367 if ((seq_flags & NOT_IDENTIFIED) != 0) {
2368
2369 /*
2370 * The reconnecting target either did not send an
2371 * identify message, or did, but we didn't find an SCB
2372 * to match.
2373 */
2374 ahd_print_devinfo(ahd, &devinfo);
2375 printf("Target did not send an IDENTIFY message. "
2376 "LASTPHASE = 0x%x.\n", lastphase);
2377 scb = NULL;
2378 } else if (scb == NULL) {
2379 /*
2380 * We don't seem to have an SCB active for this
2381 * transaction. Print an error and reset the bus.
2382 */
2383 ahd_print_devinfo(ahd, &devinfo);
2384 printf("No SCB found during protocol violation\n");
2385 goto proto_violation_reset;
2386 } else {
2387 ahd_set_transaction_status(scb, CAM_SEQUENCE_FAIL);
2388 if ((seq_flags & NO_CDB_SENT) != 0) {
2389 ahd_print_path(ahd, scb);
2390 printf("No or incomplete CDB sent to device.\n");
2391 } else if ((ahd_inb_scbram(ahd, SCB_CONTROL)
2392 & STATUS_RCVD) == 0) {
2393 /*
2394 * The target never bothered to provide status to
2395 * us prior to completing the command. Since we don't
2396 * know the disposition of this command, we must attempt
2397 * to abort it. Assert ATN and prepare to send an abort
2398 * message.
2399 */
2400 ahd_print_path(ahd, scb);
2401 printf("Completed command without status.\n");
2402 } else {
2403 ahd_print_path(ahd, scb);
2404 printf("Unknown protocol violation.\n");
2405 ahd_dump_card_state(ahd);
2406 }
2407 }
2408 if ((lastphase & ~P_DATAIN_DT) == 0
2409 || lastphase == P_COMMAND) {
2410 proto_violation_reset:
2411 /*
2412 * Target either went directly to data
2413 * phase or didn't respond to our ATN.
2414 * The only safe thing to do is to blow
2415 * it away with a bus reset.
2416 */
2417 found = ahd_reset_channel(ahd, 'A', TRUE);
2418 printf("%s: Issued Channel %c Bus Reset. "
2419 "%d SCBs aborted\n", ahd_name(ahd), 'A', found);
2420 } else {
2421 /*
2422 * Leave the selection hardware off in case
2423 * this abort attempt will affect yet to
2424 * be sent commands.
2425 */
2426 ahd_outb(ahd, SCSISEQ0,
2427 ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
2428 ahd_assert_atn(ahd);
2429 ahd_outb(ahd, MSG_OUT, HOST_MSG);
2430 if (scb == NULL) {
2431 ahd_print_devinfo(ahd, &devinfo);
2432 ahd->msgout_buf[0] = MSG_ABORT_TASK;
2433 ahd->msgout_len = 1;
2434 ahd->msgout_index = 0;
2435 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
2436 } else {
2437 ahd_print_path(ahd, scb);
2438 scb->flags |= SCB_ABORT;
2439 }
2440 printf("Protocol violation %s. Attempting to abort.\n",
2441 ahd_lookup_phase_entry(curphase)->phasemsg);
2442 }
2443 }
2444
2445 /*
2446 * Force renegotiation to occur the next time we initiate
2447 * a command to the current device.
2448 */
2449 static void
ahd_force_renegotiation(struct ahd_softc * ahd,struct ahd_devinfo * devinfo)2450 ahd_force_renegotiation(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
2451 {
2452 struct ahd_initiator_tinfo *targ_info;
2453 struct ahd_tmode_tstate *tstate;
2454
2455 #ifdef AHD_DEBUG
2456 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
2457 ahd_print_devinfo(ahd, devinfo);
2458 printf("Forcing renegotiation\n");
2459 }
2460 #endif
2461 targ_info = ahd_fetch_transinfo(ahd,
2462 devinfo->channel,
2463 devinfo->our_scsiid,
2464 devinfo->target,
2465 &tstate);
2466 ahd_update_neg_request(ahd, devinfo, tstate,
2467 targ_info, AHD_NEG_IF_NON_ASYNC);
2468 }
2469
2470 #define AHD_MAX_STEPS 2000
2471 void
ahd_clear_critical_section(struct ahd_softc * ahd)2472 ahd_clear_critical_section(struct ahd_softc *ahd)
2473 {
2474 ahd_mode_state saved_modes;
2475 int stepping;
2476 int steps;
2477 int first_instr;
2478 u_int simode0;
2479 u_int simode1;
2480 u_int simode3;
2481 u_int lqimode0;
2482 u_int lqimode1;
2483 u_int lqomode0;
2484 u_int lqomode1;
2485
2486 if (ahd->num_critical_sections == 0)
2487 return;
2488
2489 stepping = FALSE;
2490 steps = 0;
2491 first_instr = 0;
2492 simode0 = 0;
2493 simode1 = 0;
2494 simode3 = 0;
2495 lqimode0 = 0;
2496 lqimode1 = 0;
2497 lqomode0 = 0;
2498 lqomode1 = 0;
2499 saved_modes = ahd_save_modes(ahd);
2500 for (;;) {
2501 struct cs *cs;
2502 u_int seqaddr;
2503 u_int i;
2504
2505 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2506 seqaddr = ahd_inb(ahd, CURADDR)
2507 | (ahd_inb(ahd, CURADDR+1) << 8);
2508
2509 cs = ahd->critical_sections;
2510 for (i = 0; i < ahd->num_critical_sections; i++, cs++) {
2511
2512 if (cs->begin < seqaddr && cs->end >= seqaddr)
2513 break;
2514 }
2515
2516 if (i == ahd->num_critical_sections)
2517 break;
2518
2519 if (steps > AHD_MAX_STEPS) {
2520 printf("%s: Infinite loop in critical section\n"
2521 "%s: First Instruction 0x%x now 0x%x\n",
2522 ahd_name(ahd), ahd_name(ahd), first_instr,
2523 seqaddr);
2524 ahd_dump_card_state(ahd);
2525 panic("critical section loop");
2526 }
2527
2528 steps++;
2529 #ifdef AHD_DEBUG
2530 if ((ahd_debug & AHD_SHOW_MISC) != 0)
2531 printf("%s: Single stepping at 0x%x\n", ahd_name(ahd),
2532 seqaddr);
2533 #endif
2534 if (stepping == FALSE) {
2535
2536 first_instr = seqaddr;
2537 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
2538 simode0 = ahd_inb(ahd, SIMODE0);
2539 simode3 = ahd_inb(ahd, SIMODE3);
2540 lqimode0 = ahd_inb(ahd, LQIMODE0);
2541 lqimode1 = ahd_inb(ahd, LQIMODE1);
2542 lqomode0 = ahd_inb(ahd, LQOMODE0);
2543 lqomode1 = ahd_inb(ahd, LQOMODE1);
2544 ahd_outb(ahd, SIMODE0, 0);
2545 ahd_outb(ahd, SIMODE3, 0);
2546 ahd_outb(ahd, LQIMODE0, 0);
2547 ahd_outb(ahd, LQIMODE1, 0);
2548 ahd_outb(ahd, LQOMODE0, 0);
2549 ahd_outb(ahd, LQOMODE1, 0);
2550 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2551 simode1 = ahd_inb(ahd, SIMODE1);
2552 /*
2553 * We don't clear ENBUSFREE. Unfortunately
2554 * we cannot re-enable busfree detection within
2555 * the current connection, so we must leave it
2556 * on while single stepping.
2557 */
2558 ahd_outb(ahd, SIMODE1, simode1 & ENBUSFREE);
2559 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) | STEP);
2560 stepping = TRUE;
2561 }
2562 ahd_outb(ahd, CLRSINT1, CLRBUSFREE);
2563 ahd_outb(ahd, CLRINT, CLRSCSIINT);
2564 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode);
2565 ahd_outb(ahd, HCNTRL, ahd->unpause);
2566 while (!ahd_is_paused(ahd))
2567 ahd_delay(200);
2568 ahd_update_modes(ahd);
2569 }
2570 if (stepping) {
2571 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
2572 ahd_outb(ahd, SIMODE0, simode0);
2573 ahd_outb(ahd, SIMODE3, simode3);
2574 ahd_outb(ahd, LQIMODE0, lqimode0);
2575 ahd_outb(ahd, LQIMODE1, lqimode1);
2576 ahd_outb(ahd, LQOMODE0, lqomode0);
2577 ahd_outb(ahd, LQOMODE1, lqomode1);
2578 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2579 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP);
2580 ahd_outb(ahd, SIMODE1, simode1);
2581 /*
2582 * SCSIINT seems to glitch occasionally when
2583 * the interrupt masks are restored. Clear SCSIINT
2584 * one more time so that only persistent errors
2585 * are seen as a real interrupt.
2586 */
2587 ahd_outb(ahd, CLRINT, CLRSCSIINT);
2588 }
2589 ahd_restore_modes(ahd, saved_modes);
2590 }
2591
2592 /*
2593 * Clear any pending interrupt status.
2594 */
2595 void
ahd_clear_intstat(struct ahd_softc * ahd)2596 ahd_clear_intstat(struct ahd_softc *ahd)
2597 {
2598 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
2599 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
2600 /* Clear any interrupt conditions this may have caused */
2601 ahd_outb(ahd, CLRLQIINT0, CLRLQIATNQAS|CLRLQICRCT1|CLRLQICRCT2
2602 |CLRLQIBADLQT|CLRLQIATNLQ|CLRLQIATNCMD);
2603 ahd_outb(ahd, CLRLQIINT1, CLRLQIPHASE_LQ|CLRLQIPHASE_NLQ|CLRLIQABORT
2604 |CLRLQICRCI_LQ|CLRLQICRCI_NLQ|CLRLQIBADLQI
2605 |CLRLQIOVERI_LQ|CLRLQIOVERI_NLQ|CLRNONPACKREQ);
2606 ahd_outb(ahd, CLRLQOINT0, CLRLQOTARGSCBPERR|CLRLQOSTOPT2|CLRLQOATNLQ
2607 |CLRLQOATNPKT|CLRLQOTCRC);
2608 ahd_outb(ahd, CLRLQOINT1, CLRLQOINITSCBPERR|CLRLQOSTOPI2|CLRLQOBADQAS
2609 |CLRLQOBUSFREE|CLRLQOPHACHGINPKT);
2610 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) {
2611 ahd_outb(ahd, CLRLQOINT0, 0);
2612 ahd_outb(ahd, CLRLQOINT1, 0);
2613 }
2614 ahd_outb(ahd, CLRSINT3, CLRNTRAMPERR|CLROSRAMPERR);
2615 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI
2616 |CLRBUSFREE|CLRSCSIPERR|CLRREQINIT);
2617 ahd_outb(ahd, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO
2618 |CLRIOERR|CLROVERRUN);
2619 ahd_outb(ahd, CLRINT, CLRSCSIINT);
2620 }
2621
2622 /**************************** Debugging Routines ******************************/
2623 #ifdef AHD_DEBUG
2624 uint32_t ahd_debug = AHD_DEBUG_OPTS;
2625 #endif
2626 void
ahd_print_scb(struct scb * scb)2627 ahd_print_scb(struct scb *scb)
2628 {
2629 struct hardware_scb *hscb;
2630 int i;
2631
2632 hscb = scb->hscb;
2633 printf("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n",
2634 (void *)scb,
2635 hscb->control,
2636 hscb->scsiid,
2637 hscb->lun,
2638 hscb->cdb_len);
2639 printf("Shared Data: ");
2640 for (i = 0; i < sizeof(hscb->shared_data.idata.cdb); i++)
2641 printf("%#02x", hscb->shared_data.idata.cdb[i]);
2642 printf(" dataptr:%#x%x datacnt:%#x sgptr:%#x tag:%#x\n",
2643 (uint32_t)((ahd_le64toh(hscb->dataptr) >> 32) & 0xFFFFFFFF),
2644 (uint32_t)(ahd_le64toh(hscb->dataptr) & 0xFFFFFFFF),
2645 ahd_le32toh(hscb->datacnt),
2646 ahd_le32toh(hscb->sgptr),
2647 SCB_GET_TAG(scb));
2648 ahd_dump_sglist(scb);
2649 }
2650
2651 void
ahd_dump_sglist(struct scb * scb)2652 ahd_dump_sglist(struct scb *scb)
2653 {
2654 int i;
2655
2656 if (scb->sg_count > 0) {
2657 if ((scb->ahd_softc->flags & AHD_64BIT_ADDRESSING) != 0) {
2658 struct ahd_dma64_seg *sg_list;
2659
2660 sg_list = (struct ahd_dma64_seg*)scb->sg_list;
2661 for (i = 0; i < scb->sg_count; i++) {
2662 uint64_t addr;
2663
2664 addr = ahd_le64toh(sg_list[i].addr);
2665 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n",
2666 i,
2667 (uint32_t)((addr >> 32) & 0xFFFFFFFF),
2668 (uint32_t)(addr & 0xFFFFFFFF),
2669 sg_list[i].len & AHD_SG_LEN_MASK,
2670 (sg_list[i].len & AHD_DMA_LAST_SEG)
2671 ? " Last" : "");
2672 }
2673 } else {
2674 struct ahd_dma_seg *sg_list;
2675
2676 sg_list = (struct ahd_dma_seg*)scb->sg_list;
2677 for (i = 0; i < scb->sg_count; i++) {
2678 uint32_t len;
2679
2680 len = ahd_le32toh(sg_list[i].len);
2681 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n",
2682 i,
2683 (len & AHD_SG_HIGH_ADDR_MASK) >> 24,
2684 ahd_le32toh(sg_list[i].addr),
2685 len & AHD_SG_LEN_MASK,
2686 len & AHD_DMA_LAST_SEG ? " Last" : "");
2687 }
2688 }
2689 }
2690 }
2691
2692 /************************* Transfer Negotiation *******************************/
2693 /*
2694 * Allocate per target mode instance (ID we respond to as a target)
2695 * transfer negotiation data structures.
2696 */
2697 static struct ahd_tmode_tstate *
ahd_alloc_tstate(struct ahd_softc * ahd,u_int scsi_id,char channel)2698 ahd_alloc_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel)
2699 {
2700 struct ahd_tmode_tstate *master_tstate;
2701 struct ahd_tmode_tstate *tstate;
2702 int i;
2703
2704 master_tstate = ahd->enabled_targets[ahd->our_id];
2705 if (ahd->enabled_targets[scsi_id] != NULL
2706 && ahd->enabled_targets[scsi_id] != master_tstate)
2707 panic("%s: ahd_alloc_tstate - Target already allocated",
2708 ahd_name(ahd));
2709 tstate = malloc(sizeof(*tstate), M_DEVBUF, M_WAITOK | M_ZERO);
2710
2711 /*
2712 * If we have allocated a master tstate, copy user settings from
2713 * the master tstate (taken from SRAM or the EEPROM) for this
2714 * channel, but reset our current and goal settings to async/narrow
2715 * until an initiator talks to us.
2716 */
2717 if (master_tstate != NULL) {
2718 memcpy(tstate, master_tstate, sizeof(*tstate));
2719 memset(tstate->enabled_luns, 0, sizeof(tstate->enabled_luns));
2720 for (i = 0; i < 16; i++) {
2721 memset(&tstate->transinfo[i].curr, 0,
2722 sizeof(tstate->transinfo[i].curr));
2723 memset(&tstate->transinfo[i].goal, 0,
2724 sizeof(tstate->transinfo[i].goal));
2725 }
2726 } else
2727 memset(tstate, 0, sizeof(*tstate));
2728 ahd->enabled_targets[scsi_id] = tstate;
2729 return (tstate);
2730 }
2731
2732 #ifdef AHD_TARGET_MODE
2733 /*
2734 * Free per target mode instance (ID we respond to as a target)
2735 * transfer negotiation data structures.
2736 */
2737 static void
ahd_free_tstate(struct ahd_softc * ahd,u_int scsi_id,char channel,int force)2738 ahd_free_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel, int force)
2739 {
2740 struct ahd_tmode_tstate *tstate;
2741
2742 /*
2743 * Don't clean up our "master" tstate.
2744 * It has our default user settings.
2745 */
2746 if (scsi_id == ahd->our_id
2747 && force == FALSE)
2748 return;
2749
2750 tstate = ahd->enabled_targets[scsi_id];
2751 if (tstate != NULL)
2752 free(tstate, M_DEVBUF);
2753 ahd->enabled_targets[scsi_id] = NULL;
2754 }
2755 #endif
2756
2757 /*
2758 * Called when we have an active connection to a target on the bus,
2759 * this function finds the nearest period to the input period limited
2760 * by the capabilities of the bus connectivity of and sync settings for
2761 * the target.
2762 */
2763 void
ahd_devlimited_syncrate(struct ahd_softc * ahd,struct ahd_initiator_tinfo * tinfo,u_int * period,u_int * ppr_options,role_t role)2764 ahd_devlimited_syncrate(struct ahd_softc *ahd,
2765 struct ahd_initiator_tinfo *tinfo,
2766 u_int *period, u_int *ppr_options, role_t role)
2767 {
2768 struct ahd_transinfo *transinfo;
2769 u_int maxsync;
2770
2771 if ((ahd_inb(ahd, SBLKCTL) & ENAB40) != 0
2772 && (ahd_inb(ahd, SSTAT2) & EXP_ACTIVE) == 0) {
2773 maxsync = AHD_SYNCRATE_PACED;
2774 } else {
2775 maxsync = AHD_SYNCRATE_ULTRA;
2776 /* Can't do DT related options on an SE bus */
2777 *ppr_options &= MSG_EXT_PPR_QAS_REQ;
2778 }
2779 /*
2780 * Never allow a value higher than our current goal
2781 * period otherwise we may allow a target initiated
2782 * negotiation to go above the limit as set by the
2783 * user. In the case of an initiator initiated
2784 * sync negotiation, we limit based on the user
2785 * setting. This allows the system to still accept
2786 * incoming negotiations even if target initiated
2787 * negotiation is not performed.
2788 */
2789 if (role == ROLE_TARGET)
2790 transinfo = &tinfo->user;
2791 else
2792 transinfo = &tinfo->goal;
2793 *ppr_options &= (transinfo->ppr_options|MSG_EXT_PPR_PCOMP_EN);
2794 if (transinfo->width == MSG_EXT_WDTR_BUS_8_BIT) {
2795 maxsync = MAX(maxsync, AHD_SYNCRATE_ULTRA2);
2796 *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
2797 }
2798 if (transinfo->period == 0) {
2799 *period = 0;
2800 *ppr_options = 0;
2801 } else {
2802 *period = MAX(*period, transinfo->period);
2803 ahd_find_syncrate(ahd, period, ppr_options, maxsync);
2804 }
2805 }
2806
2807 /*
2808 * Look up the valid period to SCSIRATE conversion in our table.
2809 * Return the period and offset that should be sent to the target
2810 * if this was the beginning of an SDTR.
2811 */
2812 void
ahd_find_syncrate(struct ahd_softc * ahd,u_int * period,u_int * ppr_options,u_int maxsync)2813 ahd_find_syncrate(struct ahd_softc *ahd, u_int *period,
2814 u_int *ppr_options, u_int maxsync)
2815 {
2816 if (*period < maxsync)
2817 *period = maxsync;
2818
2819 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) != 0
2820 && *period > AHD_SYNCRATE_MIN_DT)
2821 *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
2822
2823 if (*period > AHD_SYNCRATE_MIN)
2824 *period = 0;
2825
2826 /* Honor PPR option conformance rules. */
2827 if (*period > AHD_SYNCRATE_PACED)
2828 *ppr_options &= ~MSG_EXT_PPR_RTI;
2829
2830 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0)
2831 *ppr_options &= (MSG_EXT_PPR_DT_REQ|MSG_EXT_PPR_QAS_REQ);
2832
2833 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0)
2834 *ppr_options &= MSG_EXT_PPR_QAS_REQ;
2835
2836 /* Skip all PACED only entries if IU is not available */
2837 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0
2838 && *period < AHD_SYNCRATE_DT)
2839 *period = AHD_SYNCRATE_DT;
2840
2841 /* Skip all DT only entries if DT is not available */
2842 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0
2843 && *period < AHD_SYNCRATE_ULTRA2)
2844 *period = AHD_SYNCRATE_ULTRA2;
2845 }
2846
2847 /*
2848 * Truncate the given synchronous offset to a value the
2849 * current adapter type and syncrate are capable of.
2850 */
2851 void
ahd_validate_offset(struct ahd_softc * ahd,struct ahd_initiator_tinfo * tinfo,u_int period,u_int * offset,int wide,role_t role)2852 ahd_validate_offset(struct ahd_softc *ahd,
2853 struct ahd_initiator_tinfo *tinfo,
2854 u_int period, u_int *offset, int wide,
2855 role_t role)
2856 {
2857 u_int maxoffset;
2858
2859 /* Limit offset to what we can do */
2860 if (period == 0)
2861 maxoffset = 0;
2862 else if (period <= AHD_SYNCRATE_PACED) {
2863 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0)
2864 maxoffset = MAX_OFFSET_PACED_BUG;
2865 else
2866 maxoffset = MAX_OFFSET_PACED;
2867 } else
2868 maxoffset = MAX_OFFSET_NON_PACED;
2869 *offset = MIN(*offset, maxoffset);
2870 if (tinfo != NULL) {
2871 if (role == ROLE_TARGET)
2872 *offset = MIN(*offset, tinfo->user.offset);
2873 else
2874 *offset = MIN(*offset, tinfo->goal.offset);
2875 }
2876 }
2877
2878 /*
2879 * Truncate the given transfer width parameter to a value the
2880 * current adapter type is capable of.
2881 */
2882 void
ahd_validate_width(struct ahd_softc * ahd,struct ahd_initiator_tinfo * tinfo,u_int * bus_width,role_t role)2883 ahd_validate_width(struct ahd_softc *ahd, struct ahd_initiator_tinfo *tinfo,
2884 u_int *bus_width, role_t role)
2885 {
2886 switch (*bus_width) {
2887 default:
2888 if (ahd->features & AHD_WIDE) {
2889 /* Respond Wide */
2890 *bus_width = MSG_EXT_WDTR_BUS_16_BIT;
2891 break;
2892 }
2893 /* FALLTHROUGH */
2894 case MSG_EXT_WDTR_BUS_8_BIT:
2895 *bus_width = MSG_EXT_WDTR_BUS_8_BIT;
2896 break;
2897 }
2898 if (tinfo != NULL) {
2899 if (role == ROLE_TARGET)
2900 *bus_width = MIN(tinfo->user.width, *bus_width);
2901 else
2902 *bus_width = MIN(tinfo->goal.width, *bus_width);
2903 }
2904 }
2905
2906 /*
2907 * Update the bitmask of targets for which the controller should
2908 * negotiate with at the next convenient opportunity. This currently
2909 * means the next time we send the initial identify messages for
2910 * a new transaction.
2911 */
2912 int
ahd_update_neg_request(struct ahd_softc * ahd,struct ahd_devinfo * devinfo,struct ahd_tmode_tstate * tstate,struct ahd_initiator_tinfo * tinfo,ahd_neg_type neg_type)2913 ahd_update_neg_request(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
2914 struct ahd_tmode_tstate *tstate,
2915 struct ahd_initiator_tinfo *tinfo, ahd_neg_type neg_type)
2916 {
2917 u_int auto_negotiate_orig;
2918
2919 auto_negotiate_orig = tstate->auto_negotiate;
2920 if (neg_type == AHD_NEG_ALWAYS) {
2921 /*
2922 * Force our "current" settings to be
2923 * unknown so that unless a bus reset
2924 * occurs the need to renegotiate is
2925 * recorded persistently.
2926 */
2927 if ((ahd->features & AHD_WIDE) != 0)
2928 tinfo->curr.width = AHD_WIDTH_UNKNOWN;
2929 tinfo->curr.period = AHD_PERIOD_UNKNOWN;
2930 tinfo->curr.offset = AHD_OFFSET_UNKNOWN;
2931 }
2932 if (tinfo->curr.period != tinfo->goal.period
2933 || tinfo->curr.width != tinfo->goal.width
2934 || tinfo->curr.offset != tinfo->goal.offset
2935 || tinfo->curr.ppr_options != tinfo->goal.ppr_options
2936 || (neg_type == AHD_NEG_IF_NON_ASYNC
2937 && (tinfo->goal.offset != 0
2938 || tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT
2939 || tinfo->goal.ppr_options != 0)))
2940 tstate->auto_negotiate |= devinfo->target_mask;
2941 else
2942 tstate->auto_negotiate &= ~devinfo->target_mask;
2943
2944 return (auto_negotiate_orig != tstate->auto_negotiate);
2945 }
2946
2947 /*
2948 * Update the user/goal/curr tables of synchronous negotiation
2949 * parameters as well as, in the case of a current or active update,
2950 * any data structures on the host controller. In the case of an
2951 * active update, the specified target is currently talking to us on
2952 * the bus, so the transfer parameter update must take effect
2953 * immediately.
2954 */
2955 void
ahd_set_syncrate(struct ahd_softc * ahd,struct ahd_devinfo * devinfo,u_int period,u_int offset,u_int ppr_options,u_int type,int paused)2956 ahd_set_syncrate(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
2957 u_int period, u_int offset, u_int ppr_options,
2958 u_int type, int paused)
2959 {
2960 struct ahd_initiator_tinfo *tinfo;
2961 struct ahd_tmode_tstate *tstate;
2962 u_int old_period;
2963 u_int old_offset;
2964 u_int old_ppr;
2965 int active;
2966 int update_needed;
2967
2968 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE;
2969 update_needed = 0;
2970
2971 if (period == 0 || offset == 0) {
2972 period = 0;
2973 offset = 0;
2974 }
2975
2976 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
2977 devinfo->target, &tstate);
2978
2979 if ((type & AHD_TRANS_USER) != 0) {
2980 tinfo->user.period = period;
2981 tinfo->user.offset = offset;
2982 tinfo->user.ppr_options = ppr_options;
2983 }
2984
2985 if ((type & AHD_TRANS_GOAL) != 0) {
2986 tinfo->goal.period = period;
2987 tinfo->goal.offset = offset;
2988 tinfo->goal.ppr_options = ppr_options;
2989 }
2990
2991 old_period = tinfo->curr.period;
2992 old_offset = tinfo->curr.offset;
2993 old_ppr = tinfo->curr.ppr_options;
2994
2995 if ((type & AHD_TRANS_CUR) != 0
2996 && (old_period != period
2997 || old_offset != offset
2998 || old_ppr != ppr_options)) {
2999
3000 update_needed++;
3001
3002 tinfo->curr.period = period;
3003 tinfo->curr.offset = offset;
3004 tinfo->curr.ppr_options = ppr_options;
3005
3006 ahd_send_async(ahd, devinfo->channel, devinfo->target,
3007 CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL);
3008
3009 if (bootverbose) {
3010 if (offset != 0) {
3011 int options;
3012
3013 printf("%s: target %d synchronous with "
3014 "period = 0x%x, offset = 0x%x",
3015 ahd_name(ahd), devinfo->target,
3016 period, offset);
3017 options = 0;
3018 if ((ppr_options & MSG_EXT_PPR_RD_STRM) != 0) {
3019 printf("(RDSTRM");
3020 options++;
3021 }
3022 if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0) {
3023 printf("%s", options ? "|DT" : "(DT");
3024 options++;
3025 }
3026 if ((ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
3027 printf("%s", options ? "|IU" : "(IU");
3028 options++;
3029 }
3030 if ((ppr_options & MSG_EXT_PPR_RTI) != 0) {
3031 printf("%s", options ? "|RTI" : "(RTI");
3032 options++;
3033 }
3034 if ((ppr_options & MSG_EXT_PPR_QAS_REQ) != 0) {
3035 printf("%s", options ? "|QAS" : "(QAS");
3036 options++;
3037 }
3038 if (options != 0)
3039 printf(")\n");
3040 else
3041 printf("\n");
3042 } else {
3043 printf("%s: target %d using "
3044 "asynchronous transfers%s\n",
3045 ahd_name(ahd), devinfo->target,
3046 (ppr_options & MSG_EXT_PPR_QAS_REQ) != 0
3047 ? "(QAS)" : "");
3048 }
3049 }
3050 }
3051 /*
3052 * Always refresh the neg-table to handle the case of the
3053 * sequencer setting the ENATNO bit for a MK_MESSAGE request.
3054 * We will always renegotiate in that case if this is a
3055 * packetized request. Also manage the busfree expected flag
3056 * from this common routine so that we catch changes due to
3057 * WDTR or SDTR messages.
3058 */
3059 if ((type & AHD_TRANS_CUR) != 0) {
3060 if (!paused)
3061 ahd_pause(ahd);
3062 ahd_update_neg_table(ahd, devinfo, &tinfo->curr);
3063 if (!paused)
3064 ahd_unpause(ahd);
3065 if (ahd->msg_type != MSG_TYPE_NONE) {
3066 if ((old_ppr & MSG_EXT_PPR_IU_REQ)
3067 != (ppr_options & MSG_EXT_PPR_IU_REQ)) {
3068 #ifdef AHD_DEBUG
3069 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
3070 ahd_print_devinfo(ahd, devinfo);
3071 printf("Expecting IU Change busfree\n");
3072 }
3073 #endif
3074 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE
3075 | MSG_FLAG_IU_REQ_CHANGED;
3076 }
3077 if ((old_ppr & MSG_EXT_PPR_IU_REQ) != 0) {
3078 #ifdef AHD_DEBUG
3079 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3080 printf("PPR with IU_REQ outstanding\n");
3081 #endif
3082 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE;
3083 }
3084 }
3085 }
3086
3087 update_needed += ahd_update_neg_request(ahd, devinfo, tstate,
3088 tinfo, AHD_NEG_TO_GOAL);
3089
3090 if (update_needed && active)
3091 ahd_update_pending_scbs(ahd);
3092 }
3093
3094 /*
3095 * Update the user/goal/curr tables of wide negotiation
3096 * parameters as well as, in the case of a current or active update,
3097 * any data structures on the host controller. In the case of an
3098 * active update, the specified target is currently talking to us on
3099 * the bus, so the transfer parameter update must take effect
3100 * immediately.
3101 */
3102 void
ahd_set_width(struct ahd_softc * ahd,struct ahd_devinfo * devinfo,u_int width,u_int type,int paused)3103 ahd_set_width(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3104 u_int width, u_int type, int paused)
3105 {
3106 struct ahd_initiator_tinfo *tinfo;
3107 struct ahd_tmode_tstate *tstate;
3108 u_int oldwidth;
3109 int active;
3110 int update_needed;
3111
3112 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE;
3113 update_needed = 0;
3114 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
3115 devinfo->target, &tstate);
3116
3117 if ((type & AHD_TRANS_USER) != 0)
3118 tinfo->user.width = width;
3119
3120 if ((type & AHD_TRANS_GOAL) != 0)
3121 tinfo->goal.width = width;
3122
3123 oldwidth = tinfo->curr.width;
3124 if ((type & AHD_TRANS_CUR) != 0 && oldwidth != width) {
3125
3126 update_needed++;
3127
3128 tinfo->curr.width = width;
3129 ahd_send_async(ahd, devinfo->channel, devinfo->target,
3130 CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL);
3131
3132 if (bootverbose) {
3133 printf("%s: target %d using %dbit transfers\n",
3134 ahd_name(ahd), devinfo->target,
3135 8 * (0x01 << width));
3136 }
3137 }
3138
3139 if ((type & AHD_TRANS_CUR) != 0) {
3140 if (!paused)
3141 ahd_pause(ahd);
3142 ahd_update_neg_table(ahd, devinfo, &tinfo->curr);
3143 if (!paused)
3144 ahd_unpause(ahd);
3145 }
3146
3147 update_needed += ahd_update_neg_request(ahd, devinfo, tstate,
3148 tinfo, AHD_NEG_TO_GOAL);
3149 if (update_needed && active)
3150 ahd_update_pending_scbs(ahd);
3151
3152 }
3153
3154 /*
3155 * Update the current state of tagged queuing for a given target.
3156 */
3157 void
ahd_set_tags(struct ahd_softc * ahd,struct ahd_devinfo * devinfo,ahd_queue_alg alg)3158 ahd_set_tags(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3159 ahd_queue_alg alg)
3160 {
3161 ahd_platform_set_tags(ahd, devinfo, alg);
3162 ahd_send_async(ahd, devinfo->channel, devinfo->target,
3163 devinfo->lun, AC_TRANSFER_NEG, &alg);
3164 }
3165
3166 static void
ahd_update_neg_table(struct ahd_softc * ahd,struct ahd_devinfo * devinfo,struct ahd_transinfo * tinfo)3167 ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3168 struct ahd_transinfo *tinfo)
3169 {
3170 ahd_mode_state saved_modes;
3171 u_int period;
3172 u_int ppr_opts;
3173 u_int con_opts;
3174 u_int offset;
3175 u_int saved_negoaddr;
3176 uint8_t iocell_opts[sizeof(ahd->iocell_opts)];
3177
3178 saved_modes = ahd_save_modes(ahd);
3179 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
3180
3181 saved_negoaddr = ahd_inb(ahd, NEGOADDR);
3182 ahd_outb(ahd, NEGOADDR, devinfo->target);
3183 period = tinfo->period;
3184 offset = tinfo->offset;
3185 memcpy(iocell_opts, ahd->iocell_opts, sizeof(ahd->iocell_opts));
3186 ppr_opts = tinfo->ppr_options & (MSG_EXT_PPR_QAS_REQ|MSG_EXT_PPR_DT_REQ
3187 |MSG_EXT_PPR_IU_REQ|MSG_EXT_PPR_RTI);
3188 con_opts = 0;
3189 if (period == 0)
3190 period = AHD_SYNCRATE_ASYNC;
3191 if (period == AHD_SYNCRATE_160) {
3192
3193 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) {
3194 /*
3195 * When the SPI4 spec was finalized, PACE transfers
3196 * was not made a configurable option in the PPR
3197 * message. Instead it is assumed to be enabled for
3198 * any syncrate faster than 80MHz. Nevertheless,
3199 * Harpoon2A4 allows this to be configurable.
3200 *
3201 * Harpoon2A4 also assumes at most 2 data bytes per
3202 * negotiated REQ/ACK offset. Paced transfers take
3203 * 4, so we must adjust our offset.
3204 */
3205 ppr_opts |= PPROPT_PACE;
3206 offset *= 2;
3207
3208 /*
3209 * Harpoon2A assumed that there would be a
3210 * fallback rate between 160 MHz and 80 MHz,
3211 * so 7 is used as the period factor rather
3212 * than 8 for 160MHz.
3213 */
3214 period = AHD_SYNCRATE_REVA_160;
3215 }
3216 if ((tinfo->ppr_options & MSG_EXT_PPR_PCOMP_EN) == 0)
3217 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &=
3218 ~AHD_PRECOMP_MASK;
3219 } else {
3220 /*
3221 * Precomp should be disabled for non-paced transfers.
3222 */
3223 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_PRECOMP_MASK;
3224
3225 if ((ahd->features & AHD_NEW_IOCELL_OPTS) != 0
3226 && (ppr_opts & MSG_EXT_PPR_DT_REQ) != 0) {
3227 /*
3228 * Slow down our CRC interval to be
3229 * compatible with devices that can't
3230 * handle a CRC at full speed.
3231 */
3232 con_opts |= ENSLOWCRC;
3233 }
3234 }
3235
3236 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PRECOMP_SLEW);
3237 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_PRECOMP_SLEW_INDEX]);
3238 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_AMPLITUDE);
3239 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_AMPLITUDE_INDEX]);
3240
3241 ahd_outb(ahd, NEGPERIOD, period);
3242 ahd_outb(ahd, NEGPPROPTS, ppr_opts);
3243 ahd_outb(ahd, NEGOFFSET, offset);
3244
3245 if (tinfo->width == MSG_EXT_WDTR_BUS_16_BIT)
3246 con_opts |= WIDEXFER;
3247
3248 /*
3249 * During packetized transfers, the target will
3250 * give us the opportunity to send command packets
3251 * without us asserting attention.
3252 */
3253 if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0)
3254 con_opts |= ENAUTOATNO;
3255 ahd_outb(ahd, NEGCONOPTS, con_opts);
3256 ahd_outb(ahd, NEGOADDR, saved_negoaddr);
3257 ahd_restore_modes(ahd, saved_modes);
3258 }
3259
3260 /*
3261 * When the transfer settings for a connection change, setup for
3262 * negotiation in pending SCBs to effect the change as quickly as
3263 * possible. We also cancel any negotiations that are scheduled
3264 * for inflight SCBs that have not been started yet.
3265 */
3266 static void
ahd_update_pending_scbs(struct ahd_softc * ahd)3267 ahd_update_pending_scbs(struct ahd_softc *ahd)
3268 {
3269 struct scb *pending_scb;
3270 int pending_scb_count;
3271 u_int scb_tag;
3272 int paused;
3273 u_int saved_scbptr;
3274 ahd_mode_state saved_modes;
3275
3276 /*
3277 * Traverse the pending SCB list and ensure that all of the
3278 * SCBs there have the proper settings. We can only safely
3279 * clear the negotiation required flag (setting requires the
3280 * execution queue to be modified) and this is only possible
3281 * if we are not already attempting to select out for this
3282 * SCB. For this reason, all callers only call this routine
3283 * if we are changing the negotiation settings for the currently
3284 * active transaction on the bus.
3285 */
3286 pending_scb_count = 0;
3287 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
3288 struct ahd_devinfo devinfo;
3289 struct hardware_scb *pending_hscb;
3290 struct ahd_tmode_tstate *tstate;
3291
3292 ahd_scb_devinfo(ahd, &devinfo, pending_scb);
3293 (void)ahd_fetch_transinfo(ahd, devinfo.channel,
3294 devinfo.our_scsiid,
3295 devinfo.target, &tstate);
3296 pending_hscb = pending_scb->hscb;
3297 if ((tstate->auto_negotiate & devinfo.target_mask) == 0
3298 && (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) {
3299 pending_scb->flags &= ~SCB_AUTO_NEGOTIATE;
3300 pending_hscb->control &= ~MK_MESSAGE;
3301 }
3302 ahd_sync_scb(ahd, pending_scb,
3303 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
3304 pending_scb_count++;
3305 }
3306
3307 if (pending_scb_count == 0)
3308 return;
3309
3310 if (ahd_is_paused(ahd)) {
3311 paused = 1;
3312 } else {
3313 paused = 0;
3314 ahd_pause(ahd);
3315 }
3316
3317 /*
3318 * Force the sequencer to reinitialize the selection for
3319 * the command at the head of the execution queue if it
3320 * has already been setup. The negotiation changes may
3321 * effect whether we select-out with ATN.
3322 */
3323 saved_modes = ahd_save_modes(ahd);
3324 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
3325 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
3326 saved_scbptr = ahd_get_scbptr(ahd);
3327 /* Ensure that the hscbs down on the card match the new information */
3328 for (scb_tag = 0; scb_tag < ahd->scb_data.maxhscbs; scb_tag++) {
3329 struct hardware_scb *pending_hscb;
3330 u_int control;
3331
3332 pending_scb = ahd_lookup_scb(ahd, scb_tag);
3333 if (pending_scb == NULL)
3334 continue;
3335 ahd_set_scbptr(ahd, scb_tag);
3336 pending_hscb = pending_scb->hscb;
3337 control = ahd_inb_scbram(ahd, SCB_CONTROL);
3338 control &= ~MK_MESSAGE;
3339 control |= pending_hscb->control & MK_MESSAGE;
3340 ahd_outb(ahd, SCB_CONTROL, control);
3341 }
3342 ahd_set_scbptr(ahd, saved_scbptr);
3343 ahd_restore_modes(ahd, saved_modes);
3344
3345 if (paused == 0)
3346 ahd_unpause(ahd);
3347 }
3348
3349 /**************************** Pathing Information *****************************/
3350 static void
ahd_fetch_devinfo(struct ahd_softc * ahd,struct ahd_devinfo * devinfo)3351 ahd_fetch_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
3352 {
3353 ahd_mode_state saved_modes;
3354 u_int saved_scsiid;
3355 role_t role;
3356 int our_id;
3357
3358 saved_modes = ahd_save_modes(ahd);
3359 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
3360
3361 if (ahd_inb(ahd, SSTAT0) & TARGET)
3362 role = ROLE_TARGET;
3363 else
3364 role = ROLE_INITIATOR;
3365
3366 if (role == ROLE_TARGET
3367 && (ahd_inb(ahd, SEQ_FLAGS) & CMDPHASE_PENDING) != 0) {
3368 /* We were selected, so pull our id from TARGIDIN */
3369 our_id = ahd_inb(ahd, TARGIDIN) & OID;
3370 } else if (role == ROLE_TARGET)
3371 our_id = ahd_inb(ahd, TOWNID);
3372 else
3373 our_id = ahd_inb(ahd, IOWNID);
3374
3375 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
3376 ahd_compile_devinfo(devinfo,
3377 our_id,
3378 SCSIID_TARGET(ahd, saved_scsiid),
3379 ahd_inb(ahd, SAVED_LUN),
3380 SCSIID_CHANNEL(ahd, saved_scsiid),
3381 role);
3382 ahd_restore_modes(ahd, saved_modes);
3383 }
3384
3385 void
ahd_print_devinfo(struct ahd_softc * ahd,struct ahd_devinfo * devinfo)3386 ahd_print_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
3387 {
3388 printf("%s:%c:%d:%d: (0x%x) ", ahd_name(ahd), 'A',
3389 devinfo->target, devinfo->lun, ahd_get_scbptr(ahd));
3390 }
3391
3392 struct ahd_phase_table_entry*
ahd_lookup_phase_entry(int phase)3393 ahd_lookup_phase_entry(int phase)
3394 {
3395 struct ahd_phase_table_entry *entry;
3396 struct ahd_phase_table_entry *last_entry;
3397
3398 /*
3399 * num_phases doesn't include the default entry which
3400 * will be returned if the phase doesn't match.
3401 */
3402 last_entry = &ahd_phase_table[num_phases];
3403 for (entry = ahd_phase_table; entry < last_entry; entry++) {
3404 if (phase == entry->phase)
3405 break;
3406 }
3407 return (entry);
3408 }
3409
3410 void
ahd_compile_devinfo(struct ahd_devinfo * devinfo,u_int our_id,u_int target,u_int lun,char channel,role_t role)3411 ahd_compile_devinfo(struct ahd_devinfo *devinfo, u_int our_id, u_int target,
3412 u_int lun, char channel, role_t role)
3413 {
3414 devinfo->our_scsiid = our_id;
3415 devinfo->target = target;
3416 devinfo->lun = lun;
3417 devinfo->target_offset = target;
3418 devinfo->channel = channel;
3419 devinfo->role = role;
3420 if (channel == 'B')
3421 devinfo->target_offset += 8;
3422 devinfo->target_mask = (0x01 << devinfo->target_offset);
3423 }
3424
3425 static void
ahd_scb_devinfo(struct ahd_softc * ahd,struct ahd_devinfo * devinfo,struct scb * scb)3426 ahd_scb_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3427 struct scb *scb)
3428 {
3429 role_t role;
3430 int our_id;
3431
3432 our_id = SCSIID_OUR_ID(scb->hscb->scsiid);
3433 role = ROLE_INITIATOR;
3434 if ((scb->hscb->control & TARGET_SCB) != 0)
3435 role = ROLE_TARGET;
3436 ahd_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahd, scb),
3437 SCB_GET_LUN(scb), SCB_GET_CHANNEL(ahd, scb), role);
3438 }
3439
3440
3441 /************************ Message Phase Processing ****************************/
3442 /*
3443 * When an initiator transaction with the MK_MESSAGE flag either reconnects
3444 * or enters the initial message out phase, we are interrupted. Fill our
3445 * outgoing message buffer with the appropriate message and begin handing
3446 * the message phase(s) manually.
3447 */
3448 static void
ahd_setup_initiator_msgout(struct ahd_softc * ahd,struct ahd_devinfo * devinfo,struct scb * scb)3449 ahd_setup_initiator_msgout(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3450 struct scb *scb)
3451 {
3452 /*
3453 * To facilitate adding multiple messages together,
3454 * each routine should increment the index and len
3455 * variables instead of setting them explicitly.
3456 */
3457 ahd->msgout_index = 0;
3458 ahd->msgout_len = 0;
3459
3460 if (ahd_currently_packetized(ahd))
3461 ahd->msg_flags |= MSG_FLAG_PACKETIZED;
3462
3463 if (ahd->send_msg_perror
3464 && ahd_inb(ahd, MSG_OUT) == HOST_MSG) {
3465 ahd->msgout_buf[ahd->msgout_index++] = ahd->send_msg_perror;
3466 ahd->msgout_len++;
3467 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
3468 #ifdef AHD_DEBUG
3469 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3470 printf("Setting up for Parity Error delivery\n");
3471 #endif
3472 return;
3473 } else if (scb == NULL) {
3474 printf("%s: WARNING. No pending message for "
3475 "I_T msgin. Issuing NO-OP\n", ahd_name(ahd));
3476 ahd->msgout_buf[ahd->msgout_index++] = MSG_NOOP;
3477 ahd->msgout_len++;
3478 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
3479 return;
3480 }
3481
3482 if ((scb->flags & SCB_DEVICE_RESET) == 0
3483 && (scb->flags & SCB_PACKETIZED) == 0
3484 && ahd_inb(ahd, MSG_OUT) == MSG_IDENTIFYFLAG) {
3485 u_int identify_msg;
3486
3487 identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb);
3488 if ((scb->hscb->control & DISCENB) != 0)
3489 identify_msg |= MSG_IDENTIFY_DISCFLAG;
3490 ahd->msgout_buf[ahd->msgout_index++] = identify_msg;
3491 ahd->msgout_len++;
3492
3493 if ((scb->hscb->control & TAG_ENB) != 0) {
3494 ahd->msgout_buf[ahd->msgout_index++] =
3495 scb->hscb->control & (TAG_ENB|SCB_TAG_TYPE);
3496 ahd->msgout_buf[ahd->msgout_index++] = SCB_GET_TAG(scb);
3497 ahd->msgout_len += 2;
3498 }
3499 }
3500
3501 if (scb->flags & SCB_DEVICE_RESET) {
3502 ahd->msgout_buf[ahd->msgout_index++] = MSG_BUS_DEV_RESET;
3503 ahd->msgout_len++;
3504 ahd_print_path(ahd, scb);
3505 printf("Bus Device Reset Message Sent\n");
3506 /*
3507 * Clear our selection hardware in advance of
3508 * the busfree. We may have an entry in the waiting
3509 * Q for this target, and we don't want to go about
3510 * selecting while we handle the busfree and blow it
3511 * away.
3512 */
3513 ahd_outb(ahd, SCSISEQ0, 0);
3514 } else if ((scb->flags & SCB_ABORT) != 0) {
3515
3516 if ((scb->hscb->control & TAG_ENB) != 0) {
3517 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT_TAG;
3518 } else {
3519 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT;
3520 }
3521 ahd->msgout_len++;
3522 ahd_print_path(ahd, scb);
3523 printf("Abort%s Message Sent\n",
3524 (scb->hscb->control & TAG_ENB) != 0 ? " Tag" : "");
3525 /*
3526 * Clear our selection hardware in advance of
3527 * the busfree. We may have an entry in the waiting
3528 * Q for this target, and we don't want to go about
3529 * selecting while we handle the busfree and blow it
3530 * away.
3531 */
3532 ahd_outb(ahd, SCSISEQ0, 0);
3533 } else if ((scb->flags & (SCB_AUTO_NEGOTIATE|SCB_NEGOTIATE)) != 0) {
3534 ahd_build_transfer_msg(ahd, devinfo);
3535 /*
3536 * Clear our selection hardware in advance of potential
3537 * PPR IU status change busfree. We may have an entry in
3538 * the waiting Q for this target, and we don't want to go
3539 * about selecting while we handle the busfree and blow
3540 * it away.
3541 */
3542 ahd_outb(ahd, SCSISEQ0, 0);
3543 } else {
3544 printf("ahd_intr: AWAITING_MSG for an SCB that "
3545 "does not have a waiting message\n");
3546 printf("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid,
3547 devinfo->target_mask);
3548 panic("SCB = %d, SCB Control = %x:%x, MSG_OUT = %x "
3549 "SCB flags = %x", SCB_GET_TAG(scb), scb->hscb->control,
3550 ahd_inb_scbram(ahd, SCB_CONTROL), ahd_inb(ahd, MSG_OUT),
3551 scb->flags);
3552 }
3553
3554 /*
3555 * Clear the MK_MESSAGE flag from the SCB so we aren't
3556 * asked to send this message again.
3557 */
3558 ahd_outb(ahd, SCB_CONTROL,
3559 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE);
3560 scb->hscb->control &= ~MK_MESSAGE;
3561 ahd->msgout_index = 0;
3562 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
3563 }
3564
3565 /*
3566 * Build an appropriate transfer negotiation message for the
3567 * currently active target.
3568 */
3569 static void
ahd_build_transfer_msg(struct ahd_softc * ahd,struct ahd_devinfo * devinfo)3570 ahd_build_transfer_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
3571 {
3572 /*
3573 * We need to initiate transfer negotiations.
3574 * If our current and goal settings are identical,
3575 * we want to renegotiate due to a check condition.
3576 */
3577 struct ahd_initiator_tinfo *tinfo;
3578 struct ahd_tmode_tstate *tstate;
3579 int dowide;
3580 int dosync;
3581 int doppr;
3582 u_int period;
3583 u_int ppr_options;
3584 u_int offset;
3585
3586 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
3587 devinfo->target, &tstate);
3588 /*
3589 * Filter our period based on the current connection.
3590 * If we can't perform DT transfers on this segment (not in LVD
3591 * mode for instance), then our decision to issue a PPR message
3592 * may change.
3593 */
3594 period = tinfo->goal.period;
3595 offset = tinfo->goal.offset;
3596 ppr_options = tinfo->goal.ppr_options;
3597 /* Target initiated PPR is not allowed in the SCSI spec */
3598 if (devinfo->role == ROLE_TARGET)
3599 ppr_options = 0;
3600 ahd_devlimited_syncrate(ahd, tinfo, &period,
3601 &ppr_options, devinfo->role);
3602 dowide = tinfo->curr.width != tinfo->goal.width;
3603 dosync = tinfo->curr.offset != offset || tinfo->curr.period != period;
3604 /*
3605 * Only use PPR if we have options that need it, even if the device
3606 * claims to support it. There might be an expander in the way
3607 * that doesn't.
3608 */
3609 doppr = ppr_options != 0;
3610
3611 if (!dowide && !dosync && !doppr) {
3612 dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT;
3613 dosync = tinfo->goal.offset != 0;
3614 }
3615
3616 if (!dowide && !dosync && !doppr) {
3617 /*
3618 * Force async with a WDTR message if we have a wide bus,
3619 * or just issue an SDTR with a 0 offset.
3620 */
3621 if ((ahd->features & AHD_WIDE) != 0)
3622 dowide = 1;
3623 else
3624 dosync = 1;
3625
3626 if (bootverbose) {
3627 ahd_print_devinfo(ahd, devinfo);
3628 printf("Ensuring async\n");
3629 }
3630 }
3631 /* Target initiated PPR is not allowed in the SCSI spec */
3632 if (devinfo->role == ROLE_TARGET)
3633 doppr = 0;
3634
3635 /*
3636 * Both the PPR message and SDTR message require the
3637 * goal syncrate to be limited to what the target device
3638 * is capable of handling (based on whether an LVD->SE
3639 * expander is on the bus), so combine these two cases.
3640 * Regardless, guarantee that if we are using WDTR and SDTR
3641 * messages that WDTR comes first.
3642 */
3643 if (doppr || (dosync && !dowide)) {
3644
3645 offset = tinfo->goal.offset;
3646 ahd_validate_offset(ahd, tinfo, period, &offset,
3647 doppr ? tinfo->goal.width
3648 : tinfo->curr.width,
3649 devinfo->role);
3650 if (doppr) {
3651 ahd_construct_ppr(ahd, devinfo, period, offset,
3652 tinfo->goal.width, ppr_options);
3653 } else {
3654 ahd_construct_sdtr(ahd, devinfo, period, offset);
3655 }
3656 } else {
3657 ahd_construct_wdtr(ahd, devinfo, tinfo->goal.width);
3658 }
3659 }
3660
3661 /*
3662 * Build a synchronous negotiation message in our message
3663 * buffer based on the input parameters.
3664 */
3665 static void
ahd_construct_sdtr(struct ahd_softc * ahd,struct ahd_devinfo * devinfo,u_int period,u_int offset)3666 ahd_construct_sdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3667 u_int period, u_int offset)
3668 {
3669 if (offset == 0)
3670 period = AHD_ASYNC_XFER_PERIOD;
3671 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED;
3672 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_SDTR_LEN;
3673 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_SDTR;
3674 ahd->msgout_buf[ahd->msgout_index++] = period;
3675 ahd->msgout_buf[ahd->msgout_index++] = offset;
3676 ahd->msgout_len += 5;
3677 if (bootverbose) {
3678 printf("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n",
3679 ahd_name(ahd), devinfo->channel, devinfo->target,
3680 devinfo->lun, period, offset);
3681 }
3682 }
3683
3684 /*
3685 * Build a wide negotiation message in our message
3686 * buffer based on the input parameters.
3687 */
3688 static void
ahd_construct_wdtr(struct ahd_softc * ahd,struct ahd_devinfo * devinfo,u_int bus_width)3689 ahd_construct_wdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3690 u_int bus_width)
3691 {
3692 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED;
3693 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_WDTR_LEN;
3694 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_WDTR;
3695 ahd->msgout_buf[ahd->msgout_index++] = bus_width;
3696 ahd->msgout_len += 4;
3697 if (bootverbose) {
3698 printf("(%s:%c:%d:%d): Sending WDTR %x\n",
3699 ahd_name(ahd), devinfo->channel, devinfo->target,
3700 devinfo->lun, bus_width);
3701 }
3702 }
3703
3704 /*
3705 * Build a parallel protocol request message in our message
3706 * buffer based on the input parameters.
3707 */
3708 static void
ahd_construct_ppr(struct ahd_softc * ahd,struct ahd_devinfo * devinfo,u_int period,u_int offset,u_int bus_width,u_int ppr_options)3709 ahd_construct_ppr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3710 u_int period, u_int offset, u_int bus_width,
3711 u_int ppr_options)
3712 {
3713 /*
3714 * Always request precompensation from
3715 * the other target if we are running
3716 * at paced syncrates.
3717 */
3718 if (period <= AHD_SYNCRATE_PACED)
3719 ppr_options |= MSG_EXT_PPR_PCOMP_EN;
3720 if (offset == 0)
3721 period = AHD_ASYNC_XFER_PERIOD;
3722 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED;
3723 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_PPR_LEN;
3724 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_PPR;
3725 ahd->msgout_buf[ahd->msgout_index++] = period;
3726 ahd->msgout_buf[ahd->msgout_index++] = 0;
3727 ahd->msgout_buf[ahd->msgout_index++] = offset;
3728 ahd->msgout_buf[ahd->msgout_index++] = bus_width;
3729 ahd->msgout_buf[ahd->msgout_index++] = ppr_options;
3730 ahd->msgout_len += 8;
3731 if (bootverbose) {
3732 printf("(%s:%c:%d:%d): Sending PPR bus_width %x, period 0x%x, "
3733 "offset 0x%x, ppr_options 0x%x\n", ahd_name(ahd),
3734 devinfo->channel, devinfo->target, devinfo->lun,
3735 bus_width, period, offset, ppr_options);
3736 }
3737 }
3738
3739 /*
3740 * Clear any active message state.
3741 */
3742 static void
ahd_clear_msg_state(struct ahd_softc * ahd)3743 ahd_clear_msg_state(struct ahd_softc *ahd)
3744 {
3745 ahd_mode_state saved_modes;
3746
3747 saved_modes = ahd_save_modes(ahd);
3748 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
3749 ahd->send_msg_perror = 0;
3750 ahd->msg_flags = MSG_FLAG_NONE;
3751 ahd->msgout_len = 0;
3752 ahd->msgin_index = 0;
3753 ahd->msg_type = MSG_TYPE_NONE;
3754 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0) {
3755 /*
3756 * The target didn't care to respond to our
3757 * message request, so clear ATN.
3758 */
3759 ahd_outb(ahd, CLRSINT1, CLRATNO);
3760 }
3761 ahd_outb(ahd, MSG_OUT, MSG_NOOP);
3762 ahd_outb(ahd, SEQ_FLAGS2,
3763 ahd_inb(ahd, SEQ_FLAGS2) & ~TARGET_MSG_PENDING);
3764 ahd_restore_modes(ahd, saved_modes);
3765 }
3766
3767 /*
3768 * Manual message loop handler.
3769 */
3770 static void
ahd_handle_message_phase(struct ahd_softc * ahd)3771 ahd_handle_message_phase(struct ahd_softc *ahd)
3772 {
3773 struct ahd_devinfo devinfo;
3774 u_int bus_phase;
3775 int end_session;
3776
3777 ahd_fetch_devinfo(ahd, &devinfo);
3778 end_session = FALSE;
3779 bus_phase = ahd_inb(ahd, LASTPHASE);
3780
3781 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0) {
3782 printf("LQIRETRY for LQIPHASE_OUTPKT\n");
3783 ahd_outb(ahd, LQCTL2, LQIRETRY);
3784 }
3785 reswitch:
3786 switch (ahd->msg_type) {
3787 case MSG_TYPE_INITIATOR_MSGOUT:
3788 {
3789 int lastbyte;
3790 int phasemis;
3791 int msgdone;
3792
3793 if (ahd->msgout_len == 0 && ahd->send_msg_perror == 0)
3794 panic("HOST_MSG_LOOP interrupt with no active message");
3795
3796 #ifdef AHD_DEBUG
3797 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
3798 ahd_print_devinfo(ahd, &devinfo);
3799 printf("INITIATOR_MSG_OUT");
3800 }
3801 #endif
3802 phasemis = bus_phase != P_MESGOUT;
3803 if (phasemis) {
3804 #ifdef AHD_DEBUG
3805 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
3806 printf(" PHASEMIS %s\n",
3807 ahd_lookup_phase_entry(bus_phase)
3808 ->phasemsg);
3809 }
3810 #endif
3811 if (bus_phase == P_MESGIN) {
3812 /*
3813 * Change gears and see if
3814 * this messages is of interest to
3815 * us or should be passed back to
3816 * the sequencer.
3817 */
3818 ahd_outb(ahd, CLRSINT1, CLRATNO);
3819 ahd->send_msg_perror = 0;
3820 ahd->msg_type = MSG_TYPE_INITIATOR_MSGIN;
3821 ahd->msgin_index = 0;
3822 goto reswitch;
3823 }
3824 end_session = TRUE;
3825 break;
3826 }
3827
3828 if (ahd->send_msg_perror) {
3829 ahd_outb(ahd, CLRSINT1, CLRATNO);
3830 ahd_outb(ahd, CLRSINT1, CLRREQINIT);
3831 #ifdef AHD_DEBUG
3832 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3833 printf(" byte 0x%x\n", ahd->send_msg_perror);
3834 #endif
3835 /*
3836 * If we are notifying the target of a CRC error
3837 * during packetized operations, the target is
3838 * within its rights to acknowledge our message
3839 * with a busfree.
3840 */
3841 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0
3842 && ahd->send_msg_perror == MSG_INITIATOR_DET_ERR)
3843 ahd->msg_flags |= MSG_FLAG_EXPECT_IDE_BUSFREE;
3844
3845 ahd_outb(ahd, RETURN_2, ahd->send_msg_perror);
3846 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE);
3847 break;
3848 }
3849
3850 msgdone = ahd->msgout_index == ahd->msgout_len;
3851 if (msgdone) {
3852 /*
3853 * The target has requested a retry.
3854 * Re-assert ATN, reset our message index to
3855 * 0, and try again.
3856 */
3857 ahd->msgout_index = 0;
3858 ahd_assert_atn(ahd);
3859 }
3860
3861 lastbyte = ahd->msgout_index == (ahd->msgout_len - 1);
3862 if (lastbyte) {
3863 /* Last byte is signified by dropping ATN */
3864 ahd_outb(ahd, CLRSINT1, CLRATNO);
3865 }
3866
3867 /*
3868 * Clear our interrupt status and present
3869 * the next byte on the bus.
3870 */
3871 ahd_outb(ahd, CLRSINT1, CLRREQINIT);
3872 #ifdef AHD_DEBUG
3873 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3874 printf(" byte 0x%x\n",
3875 ahd->msgout_buf[ahd->msgout_index]);
3876 #endif
3877 ahd_outb(ahd, RETURN_2, ahd->msgout_buf[ahd->msgout_index++]);
3878 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE);
3879 break;
3880 }
3881 case MSG_TYPE_INITIATOR_MSGIN:
3882 {
3883 int phasemis;
3884 int message_done;
3885
3886 #ifdef AHD_DEBUG
3887 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
3888 ahd_print_devinfo(ahd, &devinfo);
3889 printf("INITIATOR_MSG_IN");
3890 }
3891 #endif
3892 phasemis = bus_phase != P_MESGIN;
3893 if (phasemis) {
3894 #ifdef AHD_DEBUG
3895 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
3896 printf(" PHASEMIS %s\n",
3897 ahd_lookup_phase_entry(bus_phase)
3898 ->phasemsg);
3899 }
3900 #endif
3901 ahd->msgin_index = 0;
3902 if (bus_phase == P_MESGOUT
3903 && (ahd->send_msg_perror != 0
3904 || (ahd->msgout_len != 0
3905 && ahd->msgout_index == 0))) {
3906 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
3907 goto reswitch;
3908 }
3909 end_session = TRUE;
3910 break;
3911 }
3912
3913 /* Pull the byte in without acking it */
3914 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIBUS);
3915 #ifdef AHD_DEBUG
3916 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3917 printf(" byte 0x%x\n",
3918 ahd->msgin_buf[ahd->msgin_index]);
3919 #endif
3920
3921 message_done = ahd_parse_msg(ahd, &devinfo);
3922
3923 if (message_done) {
3924 /*
3925 * Clear our incoming message buffer in case there
3926 * is another message following this one.
3927 */
3928 ahd->msgin_index = 0;
3929
3930 /*
3931 * If this message illicited a response,
3932 * assert ATN so the target takes us to the
3933 * message out phase.
3934 */
3935 if (ahd->msgout_len != 0) {
3936 #ifdef AHD_DEBUG
3937 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
3938 ahd_print_devinfo(ahd, &devinfo);
3939 printf("Asserting ATN for response\n");
3940 }
3941 #endif
3942 ahd_assert_atn(ahd);
3943 }
3944 } else
3945 ahd->msgin_index++;
3946
3947 if (message_done == MSGLOOP_TERMINATED) {
3948 end_session = TRUE;
3949 } else {
3950 /* Ack the byte */
3951 ahd_outb(ahd, CLRSINT1, CLRREQINIT);
3952 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_READ);
3953 }
3954 break;
3955 }
3956 case MSG_TYPE_TARGET_MSGIN:
3957 {
3958 int msgdone;
3959 int msgout_request;
3960
3961 /*
3962 * By default, the message loop will continue.
3963 */
3964 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG);
3965
3966 if (ahd->msgout_len == 0)
3967 panic("Target MSGIN with no active message");
3968
3969 /*
3970 * If we interrupted a mesgout session, the initiator
3971 * will not know this until our first REQ. So, we
3972 * only honor mesgout requests after we've sent our
3973 * first byte.
3974 */
3975 if ((ahd_inb(ahd, SCSISIGI) & ATNI) != 0
3976 && ahd->msgout_index > 0)
3977 msgout_request = TRUE;
3978 else
3979 msgout_request = FALSE;
3980
3981 if (msgout_request) {
3982
3983 /*
3984 * Change gears and see if
3985 * this messages is of interest to
3986 * us or should be passed back to
3987 * the sequencer.
3988 */
3989 ahd->msg_type = MSG_TYPE_TARGET_MSGOUT;
3990 ahd_outb(ahd, SCSISIGO, P_MESGOUT | BSYO);
3991 ahd->msgin_index = 0;
3992 /* Dummy read to REQ for first byte */
3993 ahd_inb(ahd, SCSIDAT);
3994 ahd_outb(ahd, SXFRCTL0,
3995 ahd_inb(ahd, SXFRCTL0) | SPIOEN);
3996 break;
3997 }
3998
3999 msgdone = ahd->msgout_index == ahd->msgout_len;
4000 if (msgdone) {
4001 ahd_outb(ahd, SXFRCTL0,
4002 ahd_inb(ahd, SXFRCTL0) & ~SPIOEN);
4003 end_session = TRUE;
4004 break;
4005 }
4006
4007 /*
4008 * Present the next byte on the bus.
4009 */
4010 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) | SPIOEN);
4011 ahd_outb(ahd, SCSIDAT, ahd->msgout_buf[ahd->msgout_index++]);
4012 break;
4013 }
4014 case MSG_TYPE_TARGET_MSGOUT:
4015 {
4016 int lastbyte;
4017 int msgdone;
4018
4019 /*
4020 * By default, the message loop will continue.
4021 */
4022 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG);
4023
4024 /*
4025 * The initiator signals that this is
4026 * the last byte by dropping ATN.
4027 */
4028 lastbyte = (ahd_inb(ahd, SCSISIGI) & ATNI) == 0;
4029
4030 /*
4031 * Read the latched byte, but turn off SPIOEN first
4032 * so that we don't inadvertently cause a REQ for the
4033 * next byte.
4034 */
4035 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) & ~SPIOEN);
4036 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIDAT);
4037 msgdone = ahd_parse_msg(ahd, &devinfo);
4038 if (msgdone == MSGLOOP_TERMINATED) {
4039 /*
4040 * The message is *really* done in that it caused
4041 * us to go to bus free. The sequencer has already
4042 * been reset at this point, so pull the ejection
4043 * handle.
4044 */
4045 return;
4046 }
4047
4048 ahd->msgin_index++;
4049
4050 /*
4051 * XXX Read spec about initiator dropping ATN too soon
4052 * and use msgdone to detect it.
4053 */
4054 if (msgdone == MSGLOOP_MSGCOMPLETE) {
4055 ahd->msgin_index = 0;
4056
4057 /*
4058 * If this message illicited a response, transition
4059 * to the Message in phase and send it.
4060 */
4061 if (ahd->msgout_len != 0) {
4062 ahd_outb(ahd, SCSISIGO, P_MESGIN | BSYO);
4063 ahd_outb(ahd, SXFRCTL0,
4064 ahd_inb(ahd, SXFRCTL0) | SPIOEN);
4065 ahd->msg_type = MSG_TYPE_TARGET_MSGIN;
4066 ahd->msgin_index = 0;
4067 break;
4068 }
4069 }
4070
4071 if (lastbyte)
4072 end_session = TRUE;
4073 else {
4074 /* Ask for the next byte. */
4075 ahd_outb(ahd, SXFRCTL0,
4076 ahd_inb(ahd, SXFRCTL0) | SPIOEN);
4077 }
4078
4079 break;
4080 }
4081 default:
4082 panic("Unknown REQINIT message type");
4083 }
4084
4085 if (end_session) {
4086 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0) {
4087 printf("%s: Returning to Idle Loop\n",
4088 ahd_name(ahd));
4089 ahd_clear_msg_state(ahd);
4090
4091 /*
4092 * Perform the equivalent of a clear_target_state.
4093 */
4094 ahd_outb(ahd, LASTPHASE, P_BUSFREE);
4095 ahd_outb(ahd, SEQ_FLAGS, NOT_IDENTIFIED|NO_CDB_SENT);
4096 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET);
4097 } else {
4098 ahd_clear_msg_state(ahd);
4099 ahd_outb(ahd, RETURN_1, EXIT_MSG_LOOP);
4100 }
4101 }
4102 }
4103
4104 /*
4105 * See if we sent a particular extended message to the target.
4106 * If "full" is true, return true only if the target saw the full
4107 * message. If "full" is false, return true if the target saw at
4108 * least the first byte of the message.
4109 */
4110 static int
ahd_sent_msg(struct ahd_softc * ahd,ahd_msgtype type,u_int msgval,int full)4111 ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, u_int msgval, int full)
4112 {
4113 int found;
4114 u_int index;
4115
4116 found = FALSE;
4117 index = 0;
4118
4119 while (index < ahd->msgout_len) {
4120 if (ahd->msgout_buf[index] == MSG_EXTENDED) {
4121 u_int end_index;
4122
4123 end_index = index + 1 + ahd->msgout_buf[index + 1];
4124 if (ahd->msgout_buf[index+2] == msgval
4125 && type == AHDMSG_EXT) {
4126
4127 if (full) {
4128 if (ahd->msgout_index > end_index)
4129 found = TRUE;
4130 } else if (ahd->msgout_index > index)
4131 found = TRUE;
4132 }
4133 index = end_index;
4134 } else if (ahd->msgout_buf[index] >= MSG_SIMPLE_TASK
4135 && ahd->msgout_buf[index] <= MSG_IGN_WIDE_RESIDUE) {
4136
4137 /* Skip tag type and tag id or residue param*/
4138 index += 2;
4139 } else {
4140 /* Single byte message */
4141 if (type == AHDMSG_1B
4142 && ahd->msgout_index > index
4143 && (ahd->msgout_buf[index] == msgval
4144 || ((ahd->msgout_buf[index] & MSG_IDENTIFYFLAG) != 0
4145 && msgval == MSG_IDENTIFYFLAG)))
4146 found = TRUE;
4147 index++;
4148 }
4149
4150 if (found)
4151 break;
4152 }
4153 return (found);
4154 }
4155
4156 /*
4157 * Wait for a complete incoming message, parse it, and respond accordingly.
4158 */
4159 static int
ahd_parse_msg(struct ahd_softc * ahd,struct ahd_devinfo * devinfo)4160 ahd_parse_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
4161 {
4162 struct ahd_initiator_tinfo *tinfo;
4163 struct ahd_tmode_tstate *tstate;
4164 int reject;
4165 int done;
4166 int response;
4167
4168 done = MSGLOOP_IN_PROG;
4169 response = FALSE;
4170 reject = FALSE;
4171 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
4172 devinfo->target, &tstate);
4173
4174 /*
4175 * Parse as much of the message as is available,
4176 * rejecting it if we don't support it. When
4177 * the entire message is available and has been
4178 * handled, return MSGLOOP_MSGCOMPLETE, indicating
4179 * that we have parsed an entire message.
4180 *
4181 * In the case of extended messages, we accept the length
4182 * byte outright and perform more checking once we know the
4183 * extended message type.
4184 */
4185 switch (ahd->msgin_buf[0]) {
4186 case MSG_DISCONNECT:
4187 case MSG_SAVEDATAPOINTER:
4188 case MSG_CMDCOMPLETE:
4189 case MSG_RESTOREPOINTERS:
4190 case MSG_IGN_WIDE_RESIDUE:
4191 /*
4192 * End our message loop as these are messages
4193 * the sequencer handles on its own.
4194 */
4195 done = MSGLOOP_TERMINATED;
4196 break;
4197 case MSG_MESSAGE_REJECT:
4198 response = ahd_handle_msg_reject(ahd, devinfo);
4199 /* FALLTHROUGH */
4200 case MSG_NOOP:
4201 done = MSGLOOP_MSGCOMPLETE;
4202 break;
4203 case MSG_EXTENDED:
4204 {
4205 /* Wait for enough of the message to begin validation */
4206 if (ahd->msgin_index < 2)
4207 break;
4208 switch (ahd->msgin_buf[2]) {
4209 case MSG_EXT_SDTR:
4210 {
4211 u_int period;
4212 u_int ppr_options;
4213 u_int offset;
4214 u_int saved_offset;
4215
4216 if (ahd->msgin_buf[1] != MSG_EXT_SDTR_LEN) {
4217 reject = TRUE;
4218 break;
4219 }
4220
4221 /*
4222 * Wait until we have both args before validating
4223 * and acting on this message.
4224 *
4225 * Add one to MSG_EXT_SDTR_LEN to account for
4226 * the extended message preamble.
4227 */
4228 if (ahd->msgin_index < (MSG_EXT_SDTR_LEN + 1))
4229 break;
4230
4231 period = ahd->msgin_buf[3];
4232 ppr_options = 0;
4233 saved_offset = offset = ahd->msgin_buf[4];
4234 ahd_devlimited_syncrate(ahd, tinfo, &period,
4235 &ppr_options, devinfo->role);
4236 ahd_validate_offset(ahd, tinfo, period, &offset,
4237 tinfo->curr.width, devinfo->role);
4238 if (bootverbose) {
4239 printf("(%s:%c:%d:%d): Received "
4240 "SDTR period %x, offset %x\n\t"
4241 "Filtered to period %x, offset %x\n",
4242 ahd_name(ahd), devinfo->channel,
4243 devinfo->target, devinfo->lun,
4244 ahd->msgin_buf[3], saved_offset,
4245 period, offset);
4246 }
4247 ahd_set_syncrate(ahd, devinfo, period,
4248 offset, ppr_options,
4249 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4250 /*paused*/TRUE);
4251
4252 /*
4253 * See if we initiated Sync Negotiation
4254 * and didn't have to fall down to async
4255 * transfers.
4256 */
4257 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, TRUE)) {
4258 /* We started it */
4259 if (saved_offset != offset) {
4260 /* Went too low - force async */
4261 reject = TRUE;
4262 }
4263 } else {
4264 /*
4265 * Send our own SDTR in reply
4266 */
4267 if (bootverbose
4268 && devinfo->role == ROLE_INITIATOR) {
4269 printf("(%s:%c:%d:%d): Target "
4270 "Initiated SDTR\n",
4271 ahd_name(ahd), devinfo->channel,
4272 devinfo->target, devinfo->lun);
4273 }
4274 ahd->msgout_index = 0;
4275 ahd->msgout_len = 0;
4276 ahd_construct_sdtr(ahd, devinfo,
4277 period, offset);
4278 ahd->msgout_index = 0;
4279 response = TRUE;
4280 }
4281 done = MSGLOOP_MSGCOMPLETE;
4282 break;
4283 }
4284 case MSG_EXT_WDTR:
4285 {
4286 u_int bus_width;
4287 u_int saved_width;
4288 u_int sending_reply;
4289
4290 sending_reply = FALSE;
4291 if (ahd->msgin_buf[1] != MSG_EXT_WDTR_LEN) {
4292 reject = TRUE;
4293 break;
4294 }
4295
4296 /*
4297 * Wait until we have our arg before validating
4298 * and acting on this message.
4299 *
4300 * Add one to MSG_EXT_WDTR_LEN to account for
4301 * the extended message preamble.
4302 */
4303 if (ahd->msgin_index < (MSG_EXT_WDTR_LEN + 1))
4304 break;
4305
4306 bus_width = ahd->msgin_buf[3];
4307 saved_width = bus_width;
4308 ahd_validate_width(ahd, tinfo, &bus_width,
4309 devinfo->role);
4310 if (bootverbose) {
4311 printf("(%s:%c:%d:%d): Received WDTR "
4312 "%x filtered to %x\n",
4313 ahd_name(ahd), devinfo->channel,
4314 devinfo->target, devinfo->lun,
4315 saved_width, bus_width);
4316 }
4317
4318 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, TRUE)) {
4319 /*
4320 * Don't send a WDTR back to the
4321 * target, since we asked first.
4322 * If the width went higher than our
4323 * request, reject it.
4324 */
4325 if (saved_width > bus_width) {
4326 reject = TRUE;
4327 printf("(%s:%c:%d:%d): requested %dBit "
4328 "transfers. Rejecting...\n",
4329 ahd_name(ahd), devinfo->channel,
4330 devinfo->target, devinfo->lun,
4331 8 * (0x01 << bus_width));
4332 bus_width = 0;
4333 }
4334 } else {
4335 /*
4336 * Send our own WDTR in reply
4337 */
4338 if (bootverbose
4339 && devinfo->role == ROLE_INITIATOR) {
4340 printf("(%s:%c:%d:%d): Target "
4341 "Initiated WDTR\n",
4342 ahd_name(ahd), devinfo->channel,
4343 devinfo->target, devinfo->lun);
4344 }
4345 ahd->msgout_index = 0;
4346 ahd->msgout_len = 0;
4347 ahd_construct_wdtr(ahd, devinfo, bus_width);
4348 ahd->msgout_index = 0;
4349 response = TRUE;
4350 sending_reply = TRUE;
4351 }
4352 /*
4353 * After a wide message, we are async, but
4354 * some devices don't seem to honor this portion
4355 * of the spec. Force a renegotiation of the
4356 * sync component of our transfer agreement even
4357 * if our goal is async. By updating our width
4358 * after forcing the negotiation, we avoid
4359 * renegotiating for width.
4360 */
4361 ahd_update_neg_request(ahd, devinfo, tstate,
4362 tinfo, AHD_NEG_ALWAYS);
4363 ahd_set_width(ahd, devinfo, bus_width,
4364 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4365 /*paused*/TRUE);
4366 if (sending_reply == FALSE && reject == FALSE) {
4367
4368 /*
4369 * We will always have an SDTR to send.
4370 */
4371 ahd->msgout_index = 0;
4372 ahd->msgout_len = 0;
4373 ahd_build_transfer_msg(ahd, devinfo);
4374 ahd->msgout_index = 0;
4375 response = TRUE;
4376 }
4377 done = MSGLOOP_MSGCOMPLETE;
4378 break;
4379 }
4380 case MSG_EXT_PPR:
4381 {
4382 u_int period;
4383 u_int offset;
4384 u_int bus_width;
4385 u_int ppr_options;
4386 u_int saved_width;
4387 u_int saved_offset;
4388 u_int saved_ppr_options;
4389
4390 if (ahd->msgin_buf[1] != MSG_EXT_PPR_LEN) {
4391 reject = TRUE;
4392 break;
4393 }
4394
4395 /*
4396 * Wait until we have all args before validating
4397 * and acting on this message.
4398 *
4399 * Add one to MSG_EXT_PPR_LEN to account for
4400 * the extended message preamble.
4401 */
4402 if (ahd->msgin_index < (MSG_EXT_PPR_LEN + 1))
4403 break;
4404
4405 period = ahd->msgin_buf[3];
4406 offset = ahd->msgin_buf[5];
4407 bus_width = ahd->msgin_buf[6];
4408 saved_width = bus_width;
4409 ppr_options = ahd->msgin_buf[7];
4410 /*
4411 * According to the spec, a DT only
4412 * period factor with no DT option
4413 * set implies async.
4414 */
4415 if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0
4416 && period <= 9)
4417 offset = 0;
4418 saved_ppr_options = ppr_options;
4419 saved_offset = offset;
4420
4421 /*
4422 * Transfer options are only available if we
4423 * are negotiating wide.
4424 */
4425 if (bus_width == 0)
4426 ppr_options &= MSG_EXT_PPR_QAS_REQ;
4427
4428 ahd_validate_width(ahd, tinfo, &bus_width,
4429 devinfo->role);
4430 ahd_devlimited_syncrate(ahd, tinfo, &period,
4431 &ppr_options, devinfo->role);
4432 ahd_validate_offset(ahd, tinfo, period, &offset,
4433 bus_width, devinfo->role);
4434
4435 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, TRUE)) {
4436 /*
4437 * If we are unable to do any of the
4438 * requested options (we went too low),
4439 * then we'll have to reject the message.
4440 */
4441 if (saved_width > bus_width
4442 || saved_offset != offset
4443 || saved_ppr_options != ppr_options) {
4444 reject = TRUE;
4445 period = 0;
4446 offset = 0;
4447 bus_width = 0;
4448 ppr_options = 0;
4449 }
4450 } else {
4451 if (devinfo->role != ROLE_TARGET)
4452 printf("(%s:%c:%d:%d): Target "
4453 "Initiated PPR\n",
4454 ahd_name(ahd), devinfo->channel,
4455 devinfo->target, devinfo->lun);
4456 else
4457 printf("(%s:%c:%d:%d): Initiator "
4458 "Initiated PPR\n",
4459 ahd_name(ahd), devinfo->channel,
4460 devinfo->target, devinfo->lun);
4461 ahd->msgout_index = 0;
4462 ahd->msgout_len = 0;
4463 ahd_construct_ppr(ahd, devinfo, period, offset,
4464 bus_width, ppr_options);
4465 ahd->msgout_index = 0;
4466 response = TRUE;
4467 }
4468 if (bootverbose) {
4469 printf("(%s:%c:%d:%d): Received PPR width %x, "
4470 "period %x, offset %x,options %x\n"
4471 "\tFiltered to width %x, period %x, "
4472 "offset %x, options %x\n",
4473 ahd_name(ahd), devinfo->channel,
4474 devinfo->target, devinfo->lun,
4475 saved_width, ahd->msgin_buf[3],
4476 saved_offset, saved_ppr_options,
4477 bus_width, period, offset, ppr_options);
4478 }
4479 ahd_set_width(ahd, devinfo, bus_width,
4480 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4481 /*paused*/TRUE);
4482 ahd_set_syncrate(ahd, devinfo, period,
4483 offset, ppr_options,
4484 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4485 /*paused*/TRUE);
4486
4487 done = MSGLOOP_MSGCOMPLETE;
4488 break;
4489 }
4490 default:
4491 /* Unknown extended message. Reject it. */
4492 reject = TRUE;
4493 break;
4494 }
4495 break;
4496 }
4497 #ifdef AHD_TARGET_MODE
4498 case MSG_BUS_DEV_RESET:
4499 ahd_handle_devreset(ahd, devinfo, CAM_LUN_WILDCARD,
4500 CAM_BDR_SENT,
4501 "Bus Device Reset Received",
4502 /*verbose_level*/0);
4503 ahd_restart(ahd);
4504 done = MSGLOOP_TERMINATED;
4505 break;
4506 case MSG_ABORT_TAG:
4507 case MSG_ABORT:
4508 case MSG_CLEAR_QUEUE:
4509 {
4510 int tag;
4511
4512 /* Target mode messages */
4513 if (devinfo->role != ROLE_TARGET) {
4514 reject = TRUE;
4515 break;
4516 }
4517 tag = SCB_LIST_NULL;
4518 if (ahd->msgin_buf[0] == MSG_ABORT_TAG)
4519 tag = ahd_inb(ahd, INITIATOR_TAG);
4520 ahd_abort_scbs(ahd, devinfo->target, devinfo->channel,
4521 devinfo->lun, tag, ROLE_TARGET,
4522 CAM_REQ_ABORTED);
4523
4524 tstate = ahd->enabled_targets[devinfo->our_scsiid];
4525 if (tstate != NULL) {
4526 struct ahd_tmode_lstate* lstate;
4527
4528 lstate = tstate->enabled_luns[devinfo->lun];
4529 if (lstate != NULL) {
4530 ahd_queue_lstate_event(ahd, lstate,
4531 devinfo->our_scsiid,
4532 ahd->msgin_buf[0],
4533 /*arg*/tag);
4534 ahd_send_lstate_events(ahd, lstate);
4535 }
4536 }
4537 ahd_restart(ahd);
4538 done = MSGLOOP_TERMINATED;
4539 break;
4540 }
4541 #endif
4542 case MSG_QAS_REQUEST:
4543 #ifdef AHD_DEBUG
4544 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
4545 printf("%s: QAS request. SCSISIGI == 0x%x\n",
4546 ahd_name(ahd), ahd_inb(ahd, SCSISIGI));
4547 #endif
4548 ahd->msg_flags |= MSG_FLAG_EXPECT_QASREJ_BUSFREE;
4549 /* FALLTHROUGH */
4550 case MSG_TERM_IO_PROC:
4551 default:
4552 reject = TRUE;
4553 break;
4554 }
4555
4556 if (reject) {
4557 /*
4558 * Setup to reject the message.
4559 */
4560 ahd->msgout_index = 0;
4561 ahd->msgout_len = 1;
4562 ahd->msgout_buf[0] = MSG_MESSAGE_REJECT;
4563 done = MSGLOOP_MSGCOMPLETE;
4564 response = TRUE;
4565 }
4566
4567 if (done != MSGLOOP_IN_PROG && !response)
4568 /* Clear the outgoing message buffer */
4569 ahd->msgout_len = 0;
4570
4571 return (done);
4572 }
4573
4574 /*
4575 * Process a message reject message.
4576 */
4577 static int
ahd_handle_msg_reject(struct ahd_softc * ahd,struct ahd_devinfo * devinfo)4578 ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
4579 {
4580 /*
4581 * What we care about here is if we had an
4582 * outstanding SDTR or WDTR message for this
4583 * target. If we did, this is a signal that
4584 * the target is refusing negotiation.
4585 */
4586 struct scb *scb;
4587 struct ahd_initiator_tinfo *tinfo;
4588 struct ahd_tmode_tstate *tstate;
4589 u_int scb_index;
4590 u_int last_msg;
4591 int response = 0;
4592
4593 scb_index = ahd_get_scbptr(ahd);
4594 scb = ahd_lookup_scb(ahd, scb_index);
4595 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel,
4596 devinfo->our_scsiid,
4597 devinfo->target, &tstate);
4598 /* Might be necessary */
4599 last_msg = ahd_inb(ahd, LAST_MSG);
4600
4601 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/FALSE)) {
4602 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/TRUE)
4603 && tinfo->goal.period <= AHD_SYNCRATE_PACED) {
4604 /*
4605 * Target may not like our SPI-4 PPR Options.
4606 * Attempt to negotiate 80MHz which will turn
4607 * off these options.
4608 */
4609 if (bootverbose) {
4610 printf("(%s:%c:%d:%d): PPR Rejected. "
4611 "Trying simple U160 PPR\n",
4612 ahd_name(ahd), devinfo->channel,
4613 devinfo->target, devinfo->lun);
4614 }
4615 tinfo->goal.period = AHD_SYNCRATE_DT;
4616 tinfo->goal.ppr_options &= MSG_EXT_PPR_IU_REQ
4617 | MSG_EXT_PPR_QAS_REQ
4618 | MSG_EXT_PPR_DT_REQ;
4619 } else {
4620 /*
4621 * Target does not support the PPR message.
4622 * Attempt to negotiate SPI-2 style.
4623 */
4624 if (bootverbose) {
4625 printf("(%s:%c:%d:%d): PPR Rejected. "
4626 "Trying WDTR/SDTR\n",
4627 ahd_name(ahd), devinfo->channel,
4628 devinfo->target, devinfo->lun);
4629 }
4630 tinfo->goal.ppr_options = 0;
4631 tinfo->curr.transport_version = 2;
4632 tinfo->goal.transport_version = 2;
4633 }
4634 ahd->msgout_index = 0;
4635 ahd->msgout_len = 0;
4636 ahd_build_transfer_msg(ahd, devinfo);
4637 ahd->msgout_index = 0;
4638 response = 1;
4639 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, /*full*/FALSE)) {
4640
4641 /* note 8bit xfers */
4642 printf("(%s:%c:%d:%d): refuses WIDE negotiation. Using "
4643 "8bit transfers\n", ahd_name(ahd),
4644 devinfo->channel, devinfo->target, devinfo->lun);
4645 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT,
4646 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4647 /*paused*/TRUE);
4648 /*
4649 * No need to clear the sync rate. If the target
4650 * did not accept the command, our syncrate is
4651 * unaffected. If the target started the negotiation,
4652 * but rejected our response, we already cleared the
4653 * sync rate before sending our WDTR.
4654 */
4655 if (tinfo->goal.offset != tinfo->curr.offset) {
4656
4657 /* Start the sync negotiation */
4658 ahd->msgout_index = 0;
4659 ahd->msgout_len = 0;
4660 ahd_build_transfer_msg(ahd, devinfo);
4661 ahd->msgout_index = 0;
4662 response = 1;
4663 }
4664 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, /*full*/FALSE)) {
4665 /* note asynch xfers and clear flag */
4666 ahd_set_syncrate(ahd, devinfo, /*period*/0,
4667 /*offset*/0, /*ppr_options*/0,
4668 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4669 /*paused*/TRUE);
4670 printf("(%s:%c:%d:%d): refuses synchronous negotiation. "
4671 "Using asynchronous transfers\n",
4672 ahd_name(ahd), devinfo->channel,
4673 devinfo->target, devinfo->lun);
4674 } else if ((scb->hscb->control & MSG_SIMPLE_TASK) != 0) {
4675 int tag_type;
4676 int mask;
4677
4678 tag_type = (scb->hscb->control & MSG_SIMPLE_TASK);
4679
4680 if (tag_type == MSG_SIMPLE_TASK) {
4681 printf("(%s:%c:%d:%d): refuses tagged commands. "
4682 "Performing non-tagged I/O\n", ahd_name(ahd),
4683 devinfo->channel, devinfo->target, devinfo->lun);
4684 ahd_set_tags(ahd, devinfo, AHD_QUEUE_NONE);
4685 mask = ~0x23;
4686 } else {
4687 printf("(%s:%c:%d:%d): refuses %s tagged commands. "
4688 "Performing simple queue tagged I/O only\n",
4689 ahd_name(ahd), devinfo->channel, devinfo->target,
4690 devinfo->lun, tag_type == MSG_ORDERED_Q_TAG
4691 ? "ordered" : "head of queue");
4692 ahd_set_tags(ahd, devinfo, AHD_QUEUE_BASIC);
4693 mask = ~0x03;
4694 }
4695
4696 /*
4697 * Resend the identify for this CCB as the target
4698 * may believe that the selection is invalid otherwise.
4699 */
4700 ahd_outb(ahd, SCB_CONTROL,
4701 ahd_inb_scbram(ahd, SCB_CONTROL) & mask);
4702 scb->hscb->control &= mask;
4703 ahd_set_transaction_tag(scb, /*enabled*/FALSE,
4704 /*type*/MSG_SIMPLE_TASK);
4705 ahd_outb(ahd, MSG_OUT, MSG_IDENTIFYFLAG);
4706 ahd_assert_atn(ahd);
4707 ahd_busy_tcl(ahd, BUILD_TCL(scb->hscb->scsiid, devinfo->lun),
4708 SCB_GET_TAG(scb));
4709
4710 /*
4711 * Requeue all tagged commands for this target
4712 * currently in our possession so they can be
4713 * converted to untagged commands.
4714 */
4715 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
4716 SCB_GET_CHANNEL(ahd, scb),
4717 SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL,
4718 ROLE_INITIATOR, CAM_REQUEUE_REQ,
4719 SEARCH_COMPLETE);
4720 } else if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_IDENTIFYFLAG, TRUE)) {
4721 /*
4722 * Most likely the device believes that we had
4723 * previously negotiated packetized.
4724 */
4725 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE
4726 | MSG_FLAG_IU_REQ_CHANGED;
4727
4728 ahd_force_renegotiation(ahd, devinfo);
4729 ahd->msgout_index = 0;
4730 ahd->msgout_len = 0;
4731 ahd_build_transfer_msg(ahd, devinfo);
4732 ahd->msgout_index = 0;
4733 response = 1;
4734 } else {
4735 /*
4736 * Otherwise, we ignore it.
4737 */
4738 printf("%s:%c:%d: Message reject for %x -- ignored\n",
4739 ahd_name(ahd), devinfo->channel, devinfo->target,
4740 last_msg);
4741 }
4742 return (response);
4743 }
4744
4745 /*
4746 * Process an ignore wide residue message.
4747 */
4748 static void
ahd_handle_ign_wide_residue(struct ahd_softc * ahd,struct ahd_devinfo * devinfo)4749 ahd_handle_ign_wide_residue(struct ahd_softc *ahd,
4750 struct ahd_devinfo *devinfo)
4751 {
4752 u_int scb_index;
4753 struct scb *scb;
4754
4755 printf("%s: ahd_handle_ign_wide_residue\n", ahd_name(ahd));
4756
4757 scb_index = ahd_get_scbptr(ahd);
4758 scb = ahd_lookup_scb(ahd, scb_index);
4759 /*
4760 * XXX Actually check data direction in the sequencer?
4761 * Perhaps add datadir to some spare bits in the hscb?
4762 */
4763 if ((ahd_inb(ahd, SEQ_FLAGS) & DPHASE) == 0
4764 || ahd_get_transfer_dir(scb) != CAM_DIR_IN) {
4765 /*
4766 * Ignore the message if we haven't
4767 * seen an appropriate data phase yet.
4768 */
4769 } else {
4770 /*
4771 * If the residual occurred on the last
4772 * transfer and the transfer request was
4773 * expected to end on an odd count, do
4774 * nothing. Otherwise, subtract a byte
4775 * and update the residual count accordingly.
4776 */
4777 uint32_t sgptr;
4778
4779 sgptr = ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR);
4780 if ((sgptr & SG_LIST_NULL) != 0
4781 && (ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE)
4782 & SCB_XFERLEN_ODD) != 0) {
4783 /*
4784 * If the residual occurred on the last
4785 * transfer and the transfer request was
4786 * expected to end on an odd count, do
4787 * nothing.
4788 */
4789 } else {
4790 uint32_t data_cnt;
4791 uint64_t data_addr;
4792 uint32_t sglen;
4793
4794 /* Pull in the rest of the sgptr */
4795 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
4796 data_cnt = ahd_inl_scbram(ahd, SCB_RESIDUAL_DATACNT);
4797 if ((sgptr & SG_LIST_NULL) != 0) {
4798 /*
4799 * The residual data count is not updated
4800 * for the command run to completion case.
4801 * Explicitly zero the count.
4802 */
4803 data_cnt &= ~AHD_SG_LEN_MASK;
4804 }
4805 data_addr = ahd_inq(ahd, SHADDR);
4806 data_cnt += 1;
4807 data_addr -= 1;
4808 sgptr &= SG_PTR_MASK;
4809 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
4810 struct ahd_dma64_seg *sg;
4811
4812 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
4813
4814 /*
4815 * The residual sg ptr points to the next S/G
4816 * to load so we must go back one.
4817 */
4818 sg--;
4819 sglen = ahd_le32toh(sg->len) & AHD_SG_LEN_MASK;
4820 if (sg != scb->sg_list
4821 && sglen < (data_cnt & AHD_SG_LEN_MASK)) {
4822
4823 sg--;
4824 sglen = ahd_le32toh(sg->len);
4825 /*
4826 * Preserve High Address and SG_LIST
4827 * bits while setting the count to 1.
4828 */
4829 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK));
4830 data_addr = ahd_le64toh(sg->addr)
4831 + (sglen & AHD_SG_LEN_MASK)
4832 - 1;
4833
4834 /*
4835 * Increment sg so it points to the
4836 * "next" sg.
4837 */
4838 sg++;
4839 sgptr = ahd_sg_virt_to_bus(ahd, scb,
4840 sg);
4841 }
4842 } else {
4843 struct ahd_dma_seg *sg;
4844
4845 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
4846
4847 /*
4848 * The residual sg ptr points to the next S/G
4849 * to load so we must go back one.
4850 */
4851 sg--;
4852 sglen = ahd_le32toh(sg->len) & AHD_SG_LEN_MASK;
4853 if (sg != scb->sg_list
4854 && sglen < (data_cnt & AHD_SG_LEN_MASK)) {
4855
4856 sg--;
4857 sglen = ahd_le32toh(sg->len);
4858 /*
4859 * Preserve High Address and SG_LIST
4860 * bits while setting the count to 1.
4861 */
4862 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK));
4863 data_addr = ahd_le32toh(sg->addr)
4864 + (sglen & AHD_SG_LEN_MASK)
4865 - 1;
4866
4867 /*
4868 * Increment sg so it points to the
4869 * "next" sg.
4870 */
4871 sg++;
4872 sgptr = ahd_sg_virt_to_bus(ahd, scb,
4873 sg);
4874 }
4875 }
4876 /*
4877 * Toggle the "oddness" of the transfer length
4878 * to handle this mid-transfer ignore wide
4879 * residue. This ensures that the oddness is
4880 * correct for subsequent data transfers.
4881 */
4882 ahd_outb(ahd, SCB_TASK_ATTRIBUTE,
4883 ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE)
4884 ^ SCB_XFERLEN_ODD);
4885
4886 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr);
4887 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, data_cnt);
4888 /*
4889 * The FIFO's pointers will be updated if/when the
4890 * sequencer re-enters a data phase.
4891 */
4892 }
4893 }
4894 }
4895
4896
4897 /*
4898 * Reinitialize the data pointers for the active transfer
4899 * based on its current residual.
4900 */
4901 static void
ahd_reinitialize_dataptrs(struct ahd_softc * ahd)4902 ahd_reinitialize_dataptrs(struct ahd_softc *ahd)
4903 {
4904 struct scb *scb;
4905 ahd_mode_state saved_modes;
4906 u_int scb_index;
4907 u_int wait;
4908 uint32_t sgptr;
4909 uint32_t resid;
4910 uint64_t dataptr;
4911
4912 AHD_ASSERT_MODES(ahd, AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK,
4913 AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK);
4914
4915 scb_index = ahd_get_scbptr(ahd);
4916 scb = ahd_lookup_scb(ahd, scb_index);
4917
4918 /*
4919 * Release and reacquire the FIFO so we
4920 * have a clean slate.
4921 */
4922 ahd_outb(ahd, DFFSXFRCTL, CLRCHN);
4923 wait = 1000;
4924 while (--wait && !(ahd_inb(ahd, MDFFSTAT) & FIFOFREE))
4925 ahd_delay(100);
4926 if (wait == 0) {
4927 ahd_print_path(ahd, scb);
4928 printf("ahd_reinitialize_dataptrs: Forcing FIFO free.\n");
4929 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT);
4930 }
4931 saved_modes = ahd_save_modes(ahd);
4932 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
4933 ahd_outb(ahd, DFFSTAT,
4934 ahd_inb(ahd, DFFSTAT)
4935 | (saved_modes == 0x11 ? CURRFIFO_1 : CURRFIFO_0));
4936
4937 /*
4938 * Determine initial values for data_addr and data_cnt
4939 * for resuming the data phase.
4940 */
4941 sgptr = (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR + 3) << 24)
4942 | (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR + 2) << 16)
4943 | (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR + 1) << 8)
4944 | ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR);
4945 sgptr &= SG_PTR_MASK;
4946
4947 resid = (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 2) << 16)
4948 | (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 1) << 8)
4949 | ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT);
4950
4951 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
4952 struct ahd_dma64_seg *sg;
4953
4954 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
4955
4956 /* The residual sg_ptr always points to the next sg */
4957 sg--;
4958
4959 dataptr = ahd_le64toh(sg->addr)
4960 + (ahd_le32toh(sg->len) & AHD_SG_LEN_MASK)
4961 - resid;
4962 ahd_outb(ahd, HADDR + 7, dataptr >> 56);
4963 ahd_outb(ahd, HADDR + 6, dataptr >> 48);
4964 ahd_outb(ahd, HADDR + 5, dataptr >> 40);
4965 ahd_outb(ahd, HADDR + 4, dataptr >> 32);
4966 } else {
4967 struct ahd_dma_seg *sg;
4968
4969 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
4970
4971 /* The residual sg_ptr always points to the next sg */
4972 sg--;
4973
4974 dataptr = ahd_le32toh(sg->addr)
4975 + (ahd_le32toh(sg->len) & AHD_SG_LEN_MASK)
4976 - resid;
4977 ahd_outb(ahd, HADDR + 4,
4978 (ahd_le32toh(sg->len) & ~AHD_SG_LEN_MASK) >> 24);
4979 }
4980 ahd_outb(ahd, HADDR + 3, dataptr >> 24);
4981 ahd_outb(ahd, HADDR + 2, dataptr >> 16);
4982 ahd_outb(ahd, HADDR + 1, dataptr >> 8);
4983 ahd_outb(ahd, HADDR, dataptr);
4984 ahd_outb(ahd, HCNT + 2, resid >> 16);
4985 ahd_outb(ahd, HCNT + 1, resid >> 8);
4986 ahd_outb(ahd, HCNT, resid);
4987 }
4988
4989 /*
4990 * Handle the effects of issuing a bus device reset message.
4991 */
4992 static void
ahd_handle_devreset(struct ahd_softc * ahd,struct ahd_devinfo * devinfo,u_int lun,cam_status status,const char * message,int verbose_level)4993 ahd_handle_devreset(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
4994 u_int lun, cam_status status, const char *message,
4995 int verbose_level)
4996 {
4997 #ifdef AHD_TARGET_MODE
4998 struct ahd_tmode_tstate* tstate;
4999 #endif
5000 int found;
5001
5002 found = ahd_abort_scbs(ahd, devinfo->target, devinfo->channel,
5003 lun, SCB_LIST_NULL, devinfo->role,
5004 status);
5005
5006 #ifdef AHD_TARGET_MODE
5007 /*
5008 * Send an immediate notify ccb to all target mord peripheral
5009 * drivers affected by this action.
5010 */
5011 tstate = ahd->enabled_targets[devinfo->our_scsiid];
5012 if (tstate != NULL) {
5013 u_int cur_lun;
5014 u_int max_lun;
5015
5016 if (lun != CAM_LUN_WILDCARD) {
5017 cur_lun = 0;
5018 max_lun = AHD_NUM_LUNS - 1;
5019 } else {
5020 cur_lun = lun;
5021 max_lun = lun;
5022 }
5023 for (cur_lun <= max_lun; cur_lun++) {
5024 struct ahd_tmode_lstate* lstate;
5025
5026 lstate = tstate->enabled_luns[cur_lun];
5027 if (lstate == NULL)
5028 continue;
5029
5030 ahd_queue_lstate_event(ahd, lstate, devinfo->our_scsiid,
5031 MSG_BUS_DEV_RESET, /*arg*/0);
5032 ahd_send_lstate_events(ahd, lstate);
5033 }
5034 }
5035 #endif
5036
5037 /*
5038 * Go back to async/narrow transfers and renegotiate.
5039 */
5040 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT,
5041 AHD_TRANS_CUR, /*paused*/TRUE);
5042 ahd_set_syncrate(ahd, devinfo, /*period*/0, /*offset*/0,
5043 /*ppr_options*/0, AHD_TRANS_CUR, /*paused*/TRUE);
5044
5045 ahd_send_async(ahd, devinfo->channel, devinfo->target,
5046 lun, AC_SENT_BDR, NULL);
5047
5048 if (message != NULL
5049 && (verbose_level <= bootverbose))
5050 printf("%s: %s on %c:%d. %d SCBs aborted\n", ahd_name(ahd),
5051 message, devinfo->channel, devinfo->target, found);
5052 }
5053
5054 #ifdef AHD_TARGET_MODE
5055 static void
ahd_setup_target_msgin(struct ahd_softc * ahd,struct ahd_devinfo * devinfo,struct scb * scb)5056 ahd_setup_target_msgin(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
5057 struct scb *scb)
5058 {
5059
5060 /*
5061 * To facilitate adding multiple messages together,
5062 * each routine should increment the index and len
5063 * variables instead of setting them explicitly.
5064 */
5065 ahd->msgout_index = 0;
5066 ahd->msgout_len = 0;
5067
5068 if (scb != NULL && (scb->flags & SCB_AUTO_NEGOTIATE) != 0)
5069 ahd_build_transfer_msg(ahd, devinfo);
5070 else
5071 panic("ahd_intr: AWAITING target message with no message");
5072
5073 ahd->msgout_index = 0;
5074 ahd->msg_type = MSG_TYPE_TARGET_MSGIN;
5075 }
5076 #endif
5077 /**************************** Initialization **********************************/
5078 static u_int
ahd_sglist_size(struct ahd_softc * ahd)5079 ahd_sglist_size(struct ahd_softc *ahd)
5080 {
5081 bus_size_t list_size;
5082
5083 list_size = sizeof(struct ahd_dma_seg) * AHD_NSEG;
5084 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0)
5085 list_size = sizeof(struct ahd_dma64_seg) * AHD_NSEG;
5086 return (list_size);
5087 }
5088
5089 /*
5090 * Calculate the optimum S/G List allocation size. S/G elements used
5091 * for a given transaction must be physically contiguous. Assume the
5092 * OS will allocate full pages to us, so it doesn't make sense to request
5093 * less than a page.
5094 */
5095 static u_int
ahd_sglist_allocsize(struct ahd_softc * ahd)5096 ahd_sglist_allocsize(struct ahd_softc *ahd)
5097 {
5098 bus_size_t sg_list_increment;
5099 bus_size_t sg_list_size;
5100 bus_size_t max_list_size;
5101 bus_size_t best_list_size;
5102
5103 /* Start out with the minimum required for AHD_NSEG. */
5104 sg_list_increment = ahd_sglist_size(ahd);
5105 sg_list_size = sg_list_increment;
5106
5107 /* Get us as close as possible to a page in size. */
5108 while ((sg_list_size + sg_list_increment) <= PAGE_SIZE)
5109 sg_list_size += sg_list_increment;
5110
5111 /*
5112 * Try to reduce the amount of wastage by allocating
5113 * multiple pages.
5114 */
5115 best_list_size = sg_list_size;
5116 max_list_size = roundup(sg_list_increment, PAGE_SIZE);
5117 if (max_list_size < 4 * PAGE_SIZE)
5118 max_list_size = 4 * PAGE_SIZE;
5119 if (max_list_size > (AHD_SCB_MAX_ALLOC * sg_list_increment))
5120 max_list_size = (AHD_SCB_MAX_ALLOC * sg_list_increment);
5121 while ((sg_list_size + sg_list_increment) <= max_list_size
5122 && (sg_list_size % PAGE_SIZE) != 0) {
5123 bus_size_t new_mod;
5124 bus_size_t best_mod;
5125
5126 sg_list_size += sg_list_increment;
5127 new_mod = sg_list_size % PAGE_SIZE;
5128 best_mod = best_list_size % PAGE_SIZE;
5129 if (new_mod > best_mod || new_mod == 0) {
5130 best_list_size = sg_list_size;
5131 }
5132 }
5133 return (best_list_size);
5134 }
5135
5136 int
ahd_softc_init(struct ahd_softc * ahd)5137 ahd_softc_init(struct ahd_softc *ahd)
5138 {
5139
5140 ahd->unpause = 0;
5141 ahd->pause = PAUSE;
5142 return (0);
5143 }
5144
5145 void
ahd_set_unit(struct ahd_softc * ahd,int unit)5146 ahd_set_unit(struct ahd_softc *ahd, int unit)
5147 {
5148 ahd->unit = unit;
5149 }
5150
5151 void
ahd_set_name(struct ahd_softc * ahd,const char * name)5152 ahd_set_name(struct ahd_softc *ahd, const char *name)
5153 {
5154 ahd->name = name;
5155 }
5156
5157 void
ahd_free(struct ahd_softc * ahd)5158 ahd_free(struct ahd_softc *ahd)
5159 {
5160 int i;
5161
5162 switch (ahd->init_level) {
5163 default:
5164 case 2:
5165 ahd_shutdown(ahd);
5166 TAILQ_REMOVE(&ahd_tailq, ahd, links);
5167 /* FALLTHROUGH */
5168 case 1:
5169 bus_dmamap_unload(ahd->parent_dmat,
5170 ahd->shared_data_map.dmamap);
5171 bus_dmamap_destroy(ahd->parent_dmat,
5172 ahd->shared_data_map.dmamap);
5173 bus_dmamem_unmap(ahd->parent_dmat, (void *)ahd->qoutfifo,
5174 ahd->shared_data_size);
5175 bus_dmamem_free(ahd->parent_dmat,
5176 &ahd->shared_data_map.dmasegs, ahd->shared_data_map.nseg);
5177 break;
5178 case 0:
5179 break;
5180 }
5181
5182 ahd_platform_free(ahd);
5183 ahd_fini_scbdata(ahd);
5184 for (i = 0; i < AHD_NUM_TARGETS; i++) {
5185 struct ahd_tmode_tstate *tstate;
5186
5187 tstate = ahd->enabled_targets[i];
5188 if (tstate != NULL) {
5189 #if AHD_TARGET_MODE
5190 int j;
5191
5192 for (j = 0; j < AHD_NUM_LUNS; j++) {
5193 struct ahd_tmode_lstate *lstate;
5194
5195 lstate = tstate->enabled_luns[j];
5196 if (lstate != NULL) {
5197 xpt_free_path(lstate->path);
5198 free(lstate, M_DEVBUF);
5199 }
5200 }
5201 #endif
5202 free(tstate, M_DEVBUF);
5203 }
5204 }
5205 #if AHD_TARGET_MODE
5206 if (ahd->black_hole != NULL) {
5207 xpt_free_path(ahd->black_hole->path);
5208 free(ahd->black_hole, M_DEVBUF);
5209 }
5210 #endif
5211 if (ahd->seep_config != NULL)
5212 free(ahd->seep_config, M_DEVBUF);
5213 if (ahd->saved_stack != NULL)
5214 free(ahd->saved_stack, M_DEVBUF);
5215 #ifndef __FreeBSD__
5216 free(ahd, M_DEVBUF);
5217 #endif
5218 return;
5219 }
5220
5221 void
ahd_shutdown(void * arg)5222 ahd_shutdown(void *arg)
5223 {
5224 struct ahd_softc *ahd;
5225
5226 ahd = arg;
5227
5228 #ifdef AHD_DEBUG
5229 printf("%s: ahd_shutdown\n", ahd_name(ahd));
5230 #endif
5231 /*
5232 * Stop periodic timer callbacks.
5233 */
5234 ahd_timer_stop(&ahd->reset_timer);
5235 ahd_timer_stop(&ahd->stat_timer);
5236
5237 /* This will reset most registers to 0, but not all */
5238 ahd_reset(ahd, /*reinit*/FALSE);
5239 }
5240
5241 /*
5242 * Reset the controller and record some information about it
5243 * that is only available just after a reset. If "reinit" is
5244 * non-zero, this reset occurred after initial configuration
5245 * and the caller requests that the chip be fully reinitialized
5246 * to a runnable state. Chip interrupts are *not* enabled after
5247 * a reinitialization. The caller must enable interrupts via
5248 * ahd_intr_enable().
5249 */
5250 int
ahd_reset(struct ahd_softc * ahd,int reinit)5251 ahd_reset(struct ahd_softc *ahd, int reinit)
5252 {
5253 u_int sxfrctl1;
5254 int wait;
5255 uint32_t cmd;
5256 struct ahd_pci_busdata *bd = ahd->bus_data;
5257
5258 /*
5259 * Preserve the value of the SXFRCTL1 register for all channels.
5260 * It contains settings that affect termination and we don't want
5261 * to disturb the integrity of the bus.
5262 */
5263 ahd_pause(ahd);
5264 ahd_update_modes(ahd);
5265 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
5266 sxfrctl1 = ahd_inb(ahd, SXFRCTL1);
5267
5268 cmd = pci_conf_read(bd->pc, bd->tag, PCI_COMMAND_STATUS_REG);
5269
5270 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) {
5271 uint32_t mod_cmd;
5272
5273 /*
5274 * A4 Razor #632
5275 * During the assertion of CHIPRST, the chip
5276 * does not disable its parity logic prior to
5277 * the start of the reset. This may cause a
5278 * parity error to be detected and thus a
5279 * spurious SERR or PERR assertion. Disable
5280 * PERR and SERR responses during the CHIPRST.
5281 */
5282 mod_cmd = cmd &
5283 ~(PCI_COMMAND_PARITY_ENABLE|PCI_COMMAND_SERR_ENABLE);
5284 pci_conf_write(bd->pc, bd->tag,
5285 PCI_COMMAND_STATUS_REG, mod_cmd);
5286 }
5287 ahd_outb(ahd, HCNTRL, CHIPRST | ahd->pause);
5288
5289 /*
5290 * Ensure that the reset has finished. We delay 1000us
5291 * prior to reading the register to make sure the chip
5292 * has sufficiently completed its reset to handle register
5293 * accesses.
5294 */
5295 wait = 1000;
5296 do {
5297 ahd_delay(1000);
5298 } while (--wait && !(ahd_inb(ahd, HCNTRL) & CHIPRSTACK));
5299
5300 if (wait == 0) {
5301 printf("%s: WARNING - Failed chip reset! "
5302 "Trying to initialize anyway.\n", ahd_name(ahd));
5303 }
5304 ahd_outb(ahd, HCNTRL, ahd->pause);
5305
5306 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) {
5307 /*
5308 * Clear any latched PCI error status and restore
5309 * previous SERR and PERR response enables.
5310 */
5311 pci_conf_write(bd->pc, bd->tag, PCI_COMMAND_STATUS_REG, cmd |
5312 (PCI_STATUS_PARITY_ERROR | PCI_STATUS_TARGET_TARGET_ABORT |
5313 PCI_STATUS_MASTER_TARGET_ABORT | PCI_STATUS_MASTER_ABORT |
5314 PCI_STATUS_SPECIAL_ERROR));
5315 }
5316
5317 /*
5318 * Mode should be SCSI after a chip reset, but lets
5319 * set it just to be safe. We touch the MODE_PTR
5320 * register directly so as to bypass the lazy update
5321 * ode in ahd_set_modes().
5322 */
5323 ahd_known_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
5324 ahd_outb(ahd, MODE_PTR,
5325 ahd_build_mode_state(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI));
5326
5327 /*
5328 * Restore SXFRCTL1.
5329 *
5330 * We must always initialize STPWEN to 1 before we
5331 * restore the saved values. STPWEN is initialized
5332 * to a tri-state condition which can only be cleared
5333 * by turning it on.
5334 */
5335 ahd_outb(ahd, SXFRCTL1, sxfrctl1|STPWEN);
5336 ahd_outb(ahd, SXFRCTL1, sxfrctl1);
5337
5338 /* Determine chip configuration */
5339 ahd->features &= ~AHD_WIDE;
5340 if ((ahd_inb(ahd, SBLKCTL) & SELWIDE) != 0)
5341 ahd->features |= AHD_WIDE;
5342
5343 /*
5344 * If a recovery action has forced a chip reset,
5345 * re-initialize the chip to our liking.
5346 */
5347 if (reinit != 0)
5348 ahd_chip_init(ahd);
5349
5350 return (0);
5351 }
5352
5353 /*
5354 * Determine the number of SCBs available on the controller
5355 */
5356 int
ahd_probe_scbs(struct ahd_softc * ahd)5357 ahd_probe_scbs(struct ahd_softc *ahd) {
5358 int i;
5359
5360 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
5361 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
5362 for (i = 0; i < AHD_SCB_MAX; i++) {
5363 int j;
5364 int ret;
5365
5366 ahd_set_scbptr(ahd, i);
5367 ahd_outw(ahd, SCB_BASE, i);
5368 for (j = 2; j < 64; j++)
5369 ahd_outb(ahd, SCB_BASE+j, 0);
5370 /* Start out life as unallocated (needing an abort) */
5371 ahd_outb(ahd, SCB_CONTROL, MK_MESSAGE);
5372 ret = ahd_inw_scbram(ahd, SCB_BASE);
5373 if (ret != i) {
5374 printf("%s: ahd_probe_scbs (!=%d): returned 0x%x\n",
5375 ahd_name(ahd), i, ret);
5376 break;
5377 }
5378 ahd_set_scbptr(ahd, 0);
5379 ret = ahd_inw_scbram(ahd, SCB_BASE);
5380 if (ret != 0) {
5381 printf("ahd_probe_scbs (non zero): returned 0x%x\n",
5382 ret);
5383 break;
5384 }
5385 }
5386 return (i);
5387 }
5388
5389 static void
ahd_initialize_hscbs(struct ahd_softc * ahd)5390 ahd_initialize_hscbs(struct ahd_softc *ahd)
5391 {
5392 int i;
5393
5394 for (i = 0; i < ahd->scb_data.maxhscbs; i++) {
5395 ahd_set_scbptr(ahd, i);
5396
5397 /* Clear the control byte. */
5398 ahd_outb(ahd, SCB_CONTROL, 0);
5399
5400 /* Set the next pointer */
5401 ahd_outw(ahd, SCB_NEXT, SCB_LIST_NULL);
5402 }
5403 }
5404
5405 static int
ahd_init_scbdata(struct ahd_softc * ahd)5406 ahd_init_scbdata(struct ahd_softc *ahd)
5407 {
5408 struct scb_data *scb_data;
5409 int i;
5410
5411 scb_data = &ahd->scb_data;
5412 TAILQ_INIT(&scb_data->free_scbs);
5413 for (i = 0; i < AHD_NUM_TARGETS * AHD_NUM_LUNS_NONPKT; i++)
5414 LIST_INIT(&scb_data->free_scb_lists[i]);
5415 LIST_INIT(&scb_data->any_dev_free_scb_list);
5416 SLIST_INIT(&scb_data->hscb_maps);
5417 SLIST_INIT(&scb_data->sg_maps);
5418 SLIST_INIT(&scb_data->sense_maps);
5419
5420 /* Determine the number of hardware SCBs and initialize them */
5421 scb_data->maxhscbs = ahd_probe_scbs(ahd);
5422 if (scb_data->maxhscbs == 0) {
5423 printf("%s: No SCB space found\n", ahd_name(ahd));
5424 return (ENXIO);
5425 }
5426 ahd_initialize_hscbs(ahd);
5427
5428 /*
5429 * Create our DMA tags. These tags define the kinds of device
5430 * accessible memory allocations and memory mappings we will
5431 * need to perform during normal operation.
5432 *
5433 * Unless we need to further restrict the allocation, we rely
5434 * on the restrictions of the parent dmat, hence the common
5435 * use of MAXADDR and MAXSIZE.
5436 */
5437
5438 /* Perform initial CCB allocation */
5439 ahd_alloc_scbs(ahd);
5440
5441 if (scb_data->numscbs == 0) {
5442 printf("%s: ahd_init_scbdata - "
5443 "Unable to allocate initial scbs\n",
5444 ahd_name(ahd));
5445 goto error_exit;
5446 }
5447
5448 /*
5449 * Note that we were successful
5450 */
5451 return (0);
5452
5453 error_exit:
5454
5455 return (ENOMEM);
5456 }
5457
5458 static struct scb *
ahd_find_scb_by_tag(struct ahd_softc * ahd,u_int tag)5459 ahd_find_scb_by_tag(struct ahd_softc *ahd, u_int tag)
5460 {
5461 struct scb *scb;
5462
5463 /*
5464 * Look on the pending list.
5465 */
5466 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
5467 if (SCB_GET_TAG(scb) == tag)
5468 return (scb);
5469 }
5470
5471 /*
5472 * Then on all of the collision free lists.
5473 */
5474 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) {
5475 struct scb *list_scb;
5476
5477 list_scb = scb;
5478 do {
5479 if (SCB_GET_TAG(list_scb) == tag)
5480 return (list_scb);
5481 list_scb = LIST_NEXT(list_scb, collision_links);
5482 } while (list_scb);
5483 }
5484
5485 /*
5486 * And finally on the generic free list.
5487 */
5488 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) {
5489 if (SCB_GET_TAG(scb) == tag)
5490 return (scb);
5491 }
5492
5493 return (NULL);
5494 }
5495
5496 static void
ahd_fini_scbdata(struct ahd_softc * ahd)5497 ahd_fini_scbdata(struct ahd_softc *ahd)
5498 {
5499 struct scb_data *scb_data;
5500
5501 scb_data = &ahd->scb_data;
5502 if (scb_data == NULL)
5503 return;
5504
5505 switch (scb_data->init_level) {
5506 default:
5507 case 3:
5508 {
5509 struct map_node *sns_map;
5510
5511 while ((sns_map = SLIST_FIRST(&scb_data->sense_maps)) != NULL) {
5512 SLIST_REMOVE_HEAD(&scb_data->sense_maps, links);
5513 ahd_freedmamem(ahd->parent_dmat, PAGE_SIZE,
5514 sns_map->dmamap, (void *)sns_map->vaddr,
5515 &sns_map->dmasegs, sns_map->nseg);
5516 free(sns_map, M_DEVBUF);
5517 }
5518 }
5519 /* FALLTHROUGH */
5520 case 2:
5521 {
5522 struct map_node *sg_map;
5523
5524 while ((sg_map = SLIST_FIRST(&scb_data->sg_maps)) != NULL) {
5525 SLIST_REMOVE_HEAD(&scb_data->sg_maps, links);
5526 ahd_freedmamem(ahd->parent_dmat,
5527 ahd_sglist_allocsize(ahd),
5528 sg_map->dmamap, (void *)sg_map->vaddr,
5529 &sg_map->dmasegs, sg_map->nseg);
5530 free(sg_map, M_DEVBUF);
5531 }
5532 }
5533 /* FALLTHROUGH */
5534 case 1:
5535 {
5536 struct map_node *hscb_map;
5537
5538 while ((hscb_map = SLIST_FIRST(&scb_data->hscb_maps)) != NULL) {
5539 SLIST_REMOVE_HEAD(&scb_data->hscb_maps, links);
5540 ahd_freedmamem(ahd->parent_dmat, PAGE_SIZE,
5541 hscb_map->dmamap,
5542 (void *)hscb_map->vaddr,
5543 &hscb_map->dmasegs, hscb_map->nseg);
5544 free(hscb_map, M_DEVBUF);
5545 }
5546 }
5547 /* FALLTHROUGH */
5548 case 0:
5549 break;
5550 }
5551 }
5552
5553 /*
5554 * DSP filter Bypass must be enabled until the first selection
5555 * after a change in bus mode (Razor #491 and #493).
5556 */
5557 static void
ahd_setup_iocell_workaround(struct ahd_softc * ahd)5558 ahd_setup_iocell_workaround(struct ahd_softc *ahd)
5559 {
5560 ahd_mode_state saved_modes;
5561
5562 saved_modes = ahd_save_modes(ahd);
5563 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
5564 ahd_outb(ahd, DSPDATACTL, ahd_inb(ahd, DSPDATACTL)
5565 | BYPASSENAB | RCVROFFSTDIS | XMITOFFSTDIS);
5566 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) | (ENSELDO|ENSELDI));
5567 #ifdef AHD_DEBUG
5568 if ((ahd_debug & AHD_SHOW_MISC) != 0)
5569 printf("%s: Setting up iocell workaround\n", ahd_name(ahd));
5570 #endif
5571 ahd_restore_modes(ahd, saved_modes);
5572 ahd->flags &= ~AHD_HAD_FIRST_SEL;
5573 }
5574
5575 static void
ahd_iocell_first_selection(struct ahd_softc * ahd)5576 ahd_iocell_first_selection(struct ahd_softc *ahd)
5577 {
5578 ahd_mode_state saved_modes;
5579 u_int sblkctl;
5580
5581 if ((ahd->flags & AHD_HAD_FIRST_SEL) != 0)
5582 return;
5583 saved_modes = ahd_save_modes(ahd);
5584 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
5585 sblkctl = ahd_inb(ahd, SBLKCTL);
5586 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
5587 #ifdef AHD_DEBUG
5588 if ((ahd_debug & AHD_SHOW_MISC) != 0)
5589 printf("%s: iocell first selection\n", ahd_name(ahd));
5590 #endif
5591 if ((sblkctl & ENAB40) != 0) {
5592 ahd_outb(ahd, DSPDATACTL,
5593 ahd_inb(ahd, DSPDATACTL) & ~BYPASSENAB);
5594 #ifdef AHD_DEBUG
5595 if ((ahd_debug & AHD_SHOW_MISC) != 0)
5596 printf("%s: BYPASS now disabled\n", ahd_name(ahd));
5597 #endif
5598 }
5599 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) & ~(ENSELDO|ENSELDI));
5600 ahd_outb(ahd, CLRINT, CLRSCSIINT);
5601 ahd_restore_modes(ahd, saved_modes);
5602 ahd->flags |= AHD_HAD_FIRST_SEL;
5603 }
5604
5605 /*************************** SCB Management ***********************************/
5606 static void
ahd_add_col_list(struct ahd_softc * ahd,struct scb * scb,u_int col_idx)5607 ahd_add_col_list(struct ahd_softc *ahd, struct scb *scb, u_int col_idx)
5608 {
5609 struct scb_list *free_list;
5610 struct scb_tailq *free_tailq;
5611 struct scb *first_scb;
5612
5613 scb->flags |= SCB_ON_COL_LIST;
5614 AHD_SET_SCB_COL_IDX(scb, col_idx);
5615 free_list = &ahd->scb_data.free_scb_lists[col_idx];
5616 free_tailq = &ahd->scb_data.free_scbs;
5617 first_scb = LIST_FIRST(free_list);
5618 if (first_scb != NULL) {
5619 LIST_INSERT_AFTER(first_scb, scb, collision_links);
5620 } else {
5621 LIST_INSERT_HEAD(free_list, scb, collision_links);
5622 TAILQ_INSERT_TAIL(free_tailq, scb, links.tqe);
5623 }
5624 }
5625
5626 static void
ahd_rem_col_list(struct ahd_softc * ahd,struct scb * scb)5627 ahd_rem_col_list(struct ahd_softc *ahd, struct scb *scb)
5628 {
5629 struct scb_list *free_list;
5630 struct scb_tailq *free_tailq;
5631 struct scb *first_scb;
5632 u_int col_idx;
5633
5634 scb->flags &= ~SCB_ON_COL_LIST;
5635 col_idx = AHD_GET_SCB_COL_IDX(ahd, scb);
5636 free_list = &ahd->scb_data.free_scb_lists[col_idx];
5637 free_tailq = &ahd->scb_data.free_scbs;
5638 first_scb = LIST_FIRST(free_list);
5639 if (first_scb == scb) {
5640 struct scb *next_scb;
5641
5642 /*
5643 * Maintain order in the collision free
5644 * lists for fairness if this device has
5645 * other colliding tags active.
5646 */
5647 next_scb = LIST_NEXT(scb, collision_links);
5648 if (next_scb != NULL) {
5649 TAILQ_INSERT_AFTER(free_tailq, scb,
5650 next_scb, links.tqe);
5651 }
5652 TAILQ_REMOVE(free_tailq, scb, links.tqe);
5653 }
5654 LIST_REMOVE(scb, collision_links);
5655 }
5656
5657 /*
5658 * Get a free scb. If there are none, see if we can allocate a new SCB.
5659 */
5660 struct scb *
ahd_get_scb(struct ahd_softc * ahd,u_int col_idx)5661 ahd_get_scb(struct ahd_softc *ahd, u_int col_idx)
5662 {
5663 struct scb *scb;
5664 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) {
5665 if (AHD_GET_SCB_COL_IDX(ahd, scb) != col_idx) {
5666 ahd_rem_col_list(ahd, scb);
5667 goto found;
5668 }
5669 }
5670 if ((scb = LIST_FIRST(&ahd->scb_data.any_dev_free_scb_list)) == NULL)
5671 return (NULL);
5672 LIST_REMOVE(scb, links.le);
5673 if (col_idx != AHD_NEVER_COL_IDX
5674 && (scb->col_scb != NULL)
5675 && (scb->col_scb->flags & SCB_ACTIVE) == 0) {
5676 LIST_REMOVE(scb->col_scb, links.le);
5677 ahd_add_col_list(ahd, scb->col_scb, col_idx);
5678 }
5679 found:
5680 scb->flags |= SCB_ACTIVE;
5681 return (scb);
5682 }
5683
5684 /*
5685 * Return an SCB resource to the free list.
5686 */
5687 void
ahd_free_scb(struct ahd_softc * ahd,struct scb * scb)5688 ahd_free_scb(struct ahd_softc *ahd, struct scb *scb)
5689 {
5690
5691 /* Clean up for the next user */
5692 scb->flags = SCB_FLAG_NONE;
5693 scb->hscb->control = 0;
5694 ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = NULL;
5695
5696 if (scb->col_scb == NULL) {
5697
5698 /*
5699 * No collision possible. Just free normally.
5700 */
5701 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
5702 scb, links.le);
5703 } else if ((scb->col_scb->flags & SCB_ON_COL_LIST) != 0) {
5704
5705 /*
5706 * The SCB we might have collided with is on
5707 * a free collision list. Put both SCBs on
5708 * the generic list.
5709 */
5710 ahd_rem_col_list(ahd, scb->col_scb);
5711 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
5712 scb, links.le);
5713 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
5714 scb->col_scb, links.le);
5715 } else if ((scb->col_scb->flags
5716 & (SCB_PACKETIZED|SCB_ACTIVE)) == SCB_ACTIVE
5717 && (scb->col_scb->hscb->control & TAG_ENB) != 0) {
5718
5719 /*
5720 * The SCB we might collide with on the next allocation
5721 * is still active in a non-packetized, tagged, context.
5722 * Put us on the SCB collision list.
5723 */
5724 ahd_add_col_list(ahd, scb,
5725 AHD_GET_SCB_COL_IDX(ahd, scb->col_scb));
5726 } else {
5727 /*
5728 * The SCB we might collide with on the next allocation
5729 * is either active in a packetized context, or free.
5730 * Since we can't collide, put this SCB on the generic
5731 * free list.
5732 */
5733 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
5734 scb, links.le);
5735 }
5736
5737 ahd_platform_scb_free(ahd, scb);
5738 }
5739
5740 int
ahd_alloc_scbs(struct ahd_softc * ahd)5741 ahd_alloc_scbs(struct ahd_softc *ahd)
5742 {
5743 struct scb_data *scb_data;
5744 struct scb *next_scb;
5745 struct hardware_scb *hscb;
5746 struct map_node *hscb_map;
5747 struct map_node *sg_map;
5748 struct map_node *sense_map;
5749 uint8_t *segs;
5750 uint8_t *sense_data;
5751 bus_addr_t hscb_busaddr;
5752 bus_addr_t sg_busaddr;
5753 bus_addr_t sense_busaddr;
5754 int newcount;
5755 int i;
5756
5757 scb_data = &ahd->scb_data;
5758 if (scb_data->numscbs >= AHD_SCB_MAX_ALLOC)
5759 /* Can't allocate any more */
5760 return (0);
5761
5762 KASSERT(scb_data->scbs_left >= 0);
5763 if (scb_data->scbs_left != 0) {
5764 int offset;
5765
5766 offset = (PAGE_SIZE / sizeof(*hscb)) - scb_data->scbs_left;
5767 hscb_map = SLIST_FIRST(&scb_data->hscb_maps);
5768 hscb = &((struct hardware_scb *)hscb_map->vaddr)[offset];
5769 hscb_busaddr = hscb_map->physaddr + (offset * sizeof(*hscb));
5770 } else {
5771 hscb_map = malloc(sizeof(*hscb_map), M_DEVBUF, M_WAITOK);
5772
5773 if (hscb_map == NULL)
5774 return (0);
5775
5776 memset(hscb_map, 0, sizeof(*hscb_map));
5777
5778 /* Allocate the next batch of hardware SCBs */
5779 if (ahd_createdmamem(ahd->parent_dmat, PAGE_SIZE,
5780 ahd->sc_dmaflags,
5781 &hscb_map->dmamap,
5782 (void **)&hscb_map->vaddr,
5783 &hscb_map->physaddr, &hscb_map->dmasegs,
5784 &hscb_map->nseg, ahd_name(ahd),
5785 "hardware SCB structures") < 0) {
5786 free(hscb_map, M_DEVBUF);
5787 return (0);
5788 }
5789
5790 SLIST_INSERT_HEAD(&scb_data->hscb_maps, hscb_map, links);
5791
5792 hscb = (struct hardware_scb *)hscb_map->vaddr;
5793 hscb_busaddr = hscb_map->physaddr;
5794 scb_data->scbs_left = PAGE_SIZE / sizeof(*hscb);
5795 }
5796
5797 scb_data->init_level++;
5798
5799 if (scb_data->sgs_left != 0) {
5800 int offset;
5801
5802 offset = ((ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd))
5803 - scb_data->sgs_left) * ahd_sglist_size(ahd);
5804 sg_map = SLIST_FIRST(&scb_data->sg_maps);
5805 segs = sg_map->vaddr + offset;
5806 sg_busaddr = sg_map->physaddr + offset;
5807 } else {
5808 sg_map = malloc(sizeof(*sg_map), M_DEVBUF, M_WAITOK);
5809
5810 if (sg_map == NULL)
5811 return (0);
5812
5813 memset(sg_map, 0, sizeof(*sg_map));
5814
5815 /* Allocate the next batch of S/G lists */
5816 if (ahd_createdmamem(ahd->parent_dmat,
5817 ahd_sglist_allocsize(ahd),
5818 ahd->sc_dmaflags,
5819 &sg_map->dmamap, (void **)&sg_map->vaddr,
5820 &sg_map->physaddr, &sg_map->dmasegs,
5821 &sg_map->nseg, ahd_name(ahd),
5822 "SG data structures") < 0) {
5823 free(sg_map, M_DEVBUF);
5824 return (0);
5825 }
5826
5827 SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links);
5828
5829 segs = sg_map->vaddr;
5830 sg_busaddr = sg_map->physaddr;
5831 scb_data->sgs_left =
5832 ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd);
5833 #ifdef AHD_DEBUG
5834 if (ahd_debug & AHD_SHOW_MEMORY)
5835 printf("%s: ahd_alloc_scbs - Mapped SG data\n",
5836 ahd_name(ahd));
5837 #endif
5838 }
5839
5840 scb_data->init_level++;
5841
5842
5843 if (scb_data->sense_left != 0) {
5844 int offset;
5845
5846 offset = PAGE_SIZE - (AHD_SENSE_BUFSIZE * scb_data->sense_left);
5847 sense_map = SLIST_FIRST(&scb_data->sense_maps);
5848 sense_data = sense_map->vaddr + offset;
5849 sense_busaddr = sense_map->physaddr + offset;
5850 } else {
5851 sense_map = malloc(sizeof(*sense_map), M_DEVBUF, M_WAITOK);
5852
5853 if (sense_map == NULL)
5854 return (0);
5855
5856 memset(sense_map, 0, sizeof(*sense_map));
5857
5858 /* Allocate the next batch of sense buffers */
5859 if (ahd_createdmamem(ahd->parent_dmat, PAGE_SIZE,
5860 ahd->sc_dmaflags,
5861 &sense_map->dmamap,
5862 (void **)&sense_map->vaddr,
5863 &sense_map->physaddr, &sense_map->dmasegs,
5864 &sense_map->nseg, ahd_name(ahd),
5865 "Sense Data structures") < 0) {
5866 free(sense_map, M_DEVBUF);
5867 return (0);
5868 }
5869
5870 SLIST_INSERT_HEAD(&scb_data->sense_maps, sense_map, links);
5871
5872 sense_data = sense_map->vaddr;
5873 sense_busaddr = sense_map->physaddr;
5874 scb_data->sense_left = PAGE_SIZE / AHD_SENSE_BUFSIZE;
5875 #ifdef AHD_DEBUG
5876 if (ahd_debug & AHD_SHOW_MEMORY)
5877 printf("%s: ahd_alloc_scbs - Mapped sense data\n",
5878 ahd_name(ahd));
5879 #endif
5880 }
5881
5882 scb_data->init_level++;
5883
5884 newcount = MIN(scb_data->sense_left, scb_data->scbs_left);
5885 newcount = MIN(newcount, scb_data->sgs_left);
5886 newcount = MIN(newcount, (AHD_SCB_MAX_ALLOC - scb_data->numscbs));
5887 scb_data->sense_left -= newcount;
5888 scb_data->scbs_left -= newcount;
5889 scb_data->sgs_left -= newcount;
5890
5891 for (i = 0; i < newcount; i++) {
5892 u_int col_tag;
5893
5894 struct scb_platform_data *pdata;
5895 #ifndef __linux__
5896 int error;
5897 #endif
5898 next_scb = malloc(sizeof(*next_scb), M_DEVBUF, M_WAITOK);
5899 if (next_scb == NULL)
5900 break;
5901
5902 pdata = malloc(sizeof(*pdata), M_DEVBUF, M_WAITOK);
5903 if (pdata == NULL) {
5904 free(next_scb, M_DEVBUF);
5905 break;
5906 }
5907 next_scb->platform_data = pdata;
5908 next_scb->hscb_map = hscb_map;
5909 next_scb->sg_map = sg_map;
5910 next_scb->sense_map = sense_map;
5911 next_scb->sg_list = segs;
5912 next_scb->sense_data = sense_data;
5913 next_scb->sense_busaddr = sense_busaddr;
5914 memset(hscb, 0, sizeof(*hscb));
5915 next_scb->hscb = hscb;
5916 hscb->hscb_busaddr = ahd_htole32(hscb_busaddr);
5917 KASSERT((vaddr_t)hscb >= (vaddr_t)hscb_map->vaddr &&
5918 (vaddr_t)hscb < (vaddr_t)hscb_map->vaddr + PAGE_SIZE);
5919
5920 /*
5921 * The sequencer always starts with the second entry.
5922 * The first entry is embedded in the scb.
5923 */
5924 next_scb->sg_list_busaddr = sg_busaddr;
5925 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0)
5926 next_scb->sg_list_busaddr
5927 += sizeof(struct ahd_dma64_seg);
5928 else
5929 next_scb->sg_list_busaddr += sizeof(struct ahd_dma_seg);
5930 next_scb->ahd_softc = ahd;
5931 next_scb->flags = SCB_FLAG_NONE;
5932
5933 error = bus_dmamap_create(ahd->parent_dmat,
5934 AHD_MAXTRANSFER_SIZE, AHD_NSEG,
5935 MAXBSIZE, 0,
5936 BUS_DMA_WAITOK|BUS_DMA_ALLOCNOW|
5937 ahd->sc_dmaflags,
5938 &next_scb->dmamap);
5939 if (error != 0) {
5940 free(next_scb, M_DEVBUF);
5941 free(pdata, M_DEVBUF);
5942 break;
5943 }
5944 next_scb->hscb->tag = ahd_htole16(scb_data->numscbs);
5945 col_tag = scb_data->numscbs ^ 0x100;
5946 next_scb->col_scb = ahd_find_scb_by_tag(ahd, col_tag);
5947 if (next_scb->col_scb != NULL)
5948 next_scb->col_scb->col_scb = next_scb;
5949 ahd_free_scb(ahd, next_scb);
5950 hscb++;
5951 hscb_busaddr += sizeof(*hscb);
5952 segs += ahd_sglist_size(ahd);
5953 sg_busaddr += ahd_sglist_size(ahd);
5954 sense_data += AHD_SENSE_BUFSIZE;
5955 sense_busaddr += AHD_SENSE_BUFSIZE;
5956 scb_data->numscbs++;
5957 }
5958 return (i);
5959 }
5960
5961 void
ahd_controller_info(struct ahd_softc * ahd,char * tbuf,size_t l)5962 ahd_controller_info(struct ahd_softc *ahd, char *tbuf, size_t l)
5963 {
5964 const char *speed;
5965 const char *type;
5966 size_t len;
5967
5968 len = snprintf(tbuf, l, "%s: ",
5969 ahd_chip_names[ahd->chip & AHD_CHIPID_MASK]);
5970 if (len > l)
5971 return;
5972 speed = "Ultra320 ";
5973 if ((ahd->features & AHD_WIDE) != 0) {
5974 type = "Wide ";
5975 } else {
5976 type = "Single ";
5977 }
5978 len += snprintf(tbuf + len, l - len, "%s%sChannel %c, SCSI Id=%d, ",
5979 speed, type, ahd->channel, ahd->our_id);
5980 if (len > l)
5981 return;
5982 snprintf(tbuf + len, l - len, "%s, %d SCBs", ahd->bus_description,
5983 ahd->scb_data.maxhscbs);
5984 }
5985
5986 static const char * const channel_strings[] = {
5987 "Primary Low",
5988 "Primary High",
5989 "Secondary Low",
5990 "Secondary High"
5991 };
5992
5993 static const char * const termstat_strings[] = {
5994 "Terminated Correctly",
5995 "Over Terminated",
5996 "Under Terminated",
5997 "Not Configured"
5998 };
5999
6000 /*
6001 * Start the board, ready for normal operation
6002 */
6003 int
ahd_init(struct ahd_softc * ahd)6004 ahd_init(struct ahd_softc *ahd)
6005 {
6006 uint8_t *next_vaddr;
6007 bus_addr_t next_baddr;
6008 size_t driver_data_size;
6009 int i;
6010 int error;
6011 u_int warn_user;
6012 uint8_t current_sensing;
6013 uint8_t fstat;
6014
6015 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
6016
6017 ahd->stack_size = ahd_probe_stack_size(ahd);
6018 ahd->saved_stack = malloc(ahd->stack_size * sizeof(uint16_t),
6019 M_DEVBUF, M_WAITOK | M_ZERO);
6020
6021 /*
6022 * Verify that the compiler hasn't over-aggressively
6023 * padded important structures.
6024 */
6025 if (sizeof(struct hardware_scb) != 64)
6026 panic("Hardware SCB size is incorrect");
6027
6028 #ifdef AHD_DEBUG
6029 if ((ahd_debug & AHD_DEBUG_SEQUENCER) != 0)
6030 ahd->flags |= AHD_SEQUENCER_DEBUG;
6031 #endif
6032
6033 /*
6034 * Default to allowing initiator operations.
6035 */
6036 ahd->flags |= AHD_INITIATORROLE;
6037
6038 /*
6039 * Only allow target mode features if this unit has them enabled.
6040 */
6041 if ((AHD_TMODE_ENABLE & (0x1 << ahd->unit)) == 0)
6042 ahd->features &= ~AHD_TARGETMODE;
6043
6044 /*
6045 * DMA tag for our command fifos and other data in system memory
6046 * the card's sequencer must be able to access. For initiator
6047 * roles, we need to allocate space for the qoutfifo. When providing
6048 * for the target mode role, we must additionally provide space for
6049 * the incoming target command fifo.
6050 */
6051 driver_data_size = AHD_SCB_MAX * sizeof(uint16_t)
6052 + sizeof(struct hardware_scb);
6053 if ((ahd->features & AHD_TARGETMODE) != 0)
6054 driver_data_size += AHD_TMODE_CMDS * sizeof(struct target_cmd);
6055 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0)
6056 driver_data_size += PKT_OVERRUN_BUFSIZE;
6057 ahd->shared_data_size = driver_data_size;
6058
6059 memset(&ahd->shared_data_map, 0, sizeof(ahd->shared_data_map));
6060 ahd->sc_dmaflags = BUS_DMA_NOWAIT;
6061
6062 if (ahd_createdmamem(ahd->parent_dmat, ahd->shared_data_size,
6063 ahd->sc_dmaflags,
6064 &ahd->shared_data_map.dmamap,
6065 (void **)&ahd->shared_data_map.vaddr,
6066 &ahd->shared_data_map.physaddr,
6067 &ahd->shared_data_map.dmasegs,
6068 &ahd->shared_data_map.nseg, ahd_name(ahd),
6069 "shared data") < 0)
6070 return (ENOMEM);
6071 ahd->qoutfifo = (void *) ahd->shared_data_map.vaddr;
6072
6073 ahd->init_level++;
6074
6075 next_vaddr = (uint8_t *)&ahd->qoutfifo[AHD_QOUT_SIZE];
6076 next_baddr = ahd->shared_data_map.physaddr +
6077 AHD_QOUT_SIZE * sizeof(uint16_t);
6078 if ((ahd->features & AHD_TARGETMODE) != 0) {
6079 ahd->targetcmds = (struct target_cmd *)next_vaddr;
6080 next_vaddr += AHD_TMODE_CMDS * sizeof(struct target_cmd);
6081 next_baddr += AHD_TMODE_CMDS * sizeof(struct target_cmd);
6082 }
6083
6084 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) {
6085 ahd->overrun_buf = next_vaddr;
6086 next_vaddr += PKT_OVERRUN_BUFSIZE;
6087 next_baddr += PKT_OVERRUN_BUFSIZE;
6088 }
6089
6090 /*
6091 * We need one SCB to serve as the "next SCB". Since the
6092 * tag identifier in this SCB will never be used, there is
6093 * no point in using a valid HSCB tag from an SCB pulled from
6094 * the standard free pool. So, we allocate this "sentinel"
6095 * specially from the DMA safe memory chunk used for the QOUTFIFO.
6096 */
6097 ahd->next_queued_hscb = (struct hardware_scb *)next_vaddr;
6098 ahd->next_queued_hscb_map = &ahd->shared_data_map;
6099 ahd->next_queued_hscb->hscb_busaddr = ahd_htole32(next_baddr);
6100
6101 memset(&ahd->scb_data, 0, sizeof(struct scb_data));
6102
6103 /* Allocate SCB data now that parent_dmat is initialized */
6104 if (ahd_init_scbdata(ahd) != 0)
6105 return (ENOMEM);
6106
6107 if ((ahd->flags & AHD_INITIATORROLE) == 0)
6108 ahd->flags &= ~AHD_RESET_BUS_A;
6109
6110 /*
6111 * Before committing these settings to the chip, give
6112 * the OSM one last chance to modify our configuration.
6113 */
6114 ahd_platform_init(ahd);
6115
6116 /* Bring up the chip. */
6117 ahd_chip_init(ahd);
6118
6119 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
6120
6121 if ((ahd->flags & AHD_CURRENT_SENSING) == 0)
6122 goto init_done;
6123
6124 /*
6125 * Verify termination based on current draw and
6126 * warn user if the bus is over/under terminated.
6127 */
6128 error = ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL,
6129 CURSENSE_ENB);
6130 if (error != 0) {
6131 printf("%s: current sensing timeout 1\n", ahd_name(ahd));
6132 goto init_done;
6133 }
6134 for (i = 20, fstat = FLX_FSTAT_BUSY;
6135 (fstat & FLX_FSTAT_BUSY) != 0 && i; i--) {
6136 error = ahd_read_flexport(ahd, FLXADDR_FLEXSTAT, &fstat);
6137 if (error != 0) {
6138 printf("%s: current sensing timeout 2\n",
6139 ahd_name(ahd));
6140 goto init_done;
6141 }
6142 }
6143 if (i == 0) {
6144 printf("%s: Timedout during current-sensing test\n",
6145 ahd_name(ahd));
6146 goto init_done;
6147 }
6148
6149 /* Latch Current Sensing status. */
6150 error = ahd_read_flexport(ahd, FLXADDR_CURRENT_STAT, ¤t_sensing);
6151 if (error != 0) {
6152 printf("%s: current sensing timeout 3\n", ahd_name(ahd));
6153 goto init_done;
6154 }
6155
6156 /* Diable current sensing. */
6157 ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 0);
6158
6159 #ifdef AHD_DEBUG
6160 if ((ahd_debug & AHD_SHOW_TERMCTL) != 0) {
6161 printf("%s: current_sensing == 0x%x\n",
6162 ahd_name(ahd), current_sensing);
6163 }
6164 #endif
6165 warn_user = 0;
6166 for (i = 0; i < 4; i++, current_sensing >>= FLX_CSTAT_SHIFT) {
6167 u_int term_stat;
6168
6169 term_stat = (current_sensing & FLX_CSTAT_MASK);
6170 switch (term_stat) {
6171 case FLX_CSTAT_OVER:
6172 case FLX_CSTAT_UNDER:
6173 warn_user++;
6174 /* FALLTHROUGH */
6175 case FLX_CSTAT_INVALID:
6176 case FLX_CSTAT_OKAY:
6177 if (warn_user == 0 && bootverbose == 0)
6178 break;
6179 printf("%s: %s Channel %s\n", ahd_name(ahd),
6180 channel_strings[i], termstat_strings[term_stat]);
6181 break;
6182 }
6183 }
6184 if (warn_user) {
6185 printf("%s: WARNING. Termination is not configured correctly.\n"
6186 "%s: WARNING. SCSI bus operations may FAIL.\n",
6187 ahd_name(ahd), ahd_name(ahd));
6188 }
6189 init_done:
6190 ahd_reset_current_bus(ahd);
6191 ahd_restart(ahd);
6192 ahd_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_US,
6193 ahd_stat_timer, ahd);
6194
6195 return (0);
6196 }
6197
6198 /*
6199 * (Re)initialize chip state after a chip reset.
6200 */
6201 static void
ahd_chip_init(struct ahd_softc * ahd)6202 ahd_chip_init(struct ahd_softc *ahd)
6203 {
6204 uint32_t busaddr;
6205 u_int sxfrctl1;
6206 u_int scsiseq_template;
6207 u_int wait;
6208 u_int i;
6209 u_int target;
6210
6211 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
6212 /*
6213 * Take the LED out of diagnostic mode
6214 */
6215 ahd_outb(ahd, SBLKCTL, ahd_inb(ahd, SBLKCTL) & ~(DIAGLEDEN|DIAGLEDON));
6216
6217 /*
6218 * Return HS_MAILBOX to its default value.
6219 */
6220 ahd->hs_mailbox = 0;
6221 ahd_outb(ahd, HS_MAILBOX, 0);
6222
6223 /* Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1. */
6224 ahd_outb(ahd, IOWNID, ahd->our_id);
6225 ahd_outb(ahd, TOWNID, ahd->our_id);
6226 sxfrctl1 = (ahd->flags & AHD_TERM_ENB_A) != 0 ? STPWEN : 0;
6227 sxfrctl1 |= (ahd->flags & AHD_SPCHK_ENB_A) != 0 ? ENSPCHK : 0;
6228 if ((ahd->bugs & AHD_LONG_SETIMO_BUG)
6229 && (ahd->seltime != STIMESEL_MIN)) {
6230 /*
6231 * The selection timer duration is twice as long
6232 * as it should be. Halve it by adding "1" to
6233 * the user specified setting.
6234 */
6235 sxfrctl1 |= ahd->seltime + STIMESEL_BUG_ADJ;
6236 } else {
6237 sxfrctl1 |= ahd->seltime;
6238 }
6239
6240 ahd_outb(ahd, SXFRCTL0, DFON);
6241 ahd_outb(ahd, SXFRCTL1, sxfrctl1|ahd->seltime|ENSTIMER|ACTNEGEN);
6242 ahd_outb(ahd, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR);
6243
6244 /*
6245 * Now that termination is set, wait for up
6246 * to 500ms for our transceivers to settle. If
6247 * the adapter does not have a cable attached,
6248 * the transceivers may never settle, so don't
6249 * complain if we fail here.
6250 */
6251 for (wait = 10000;
6252 (ahd_inb(ahd, SBLKCTL) & (ENAB40|ENAB20)) == 0 && wait;
6253 wait--)
6254 ahd_delay(100);
6255
6256 /* Clear any false bus resets due to the transceivers settling */
6257 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI);
6258 ahd_outb(ahd, CLRINT, CLRSCSIINT);
6259
6260 /* Initialize mode specific S/G state. */
6261 for (i = 0; i < 2; i++) {
6262 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i);
6263 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR);
6264 ahd_outb(ahd, SG_STATE, 0);
6265 ahd_outb(ahd, CLRSEQINTSRC, 0xFF);
6266 ahd_outb(ahd, SEQIMODE,
6267 ENSAVEPTRS|ENCFG4DATA|ENCFG4ISTAT
6268 |ENCFG4TSTAT|ENCFG4ICMD|ENCFG4TCMD);
6269 }
6270
6271 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
6272 ahd_outb(ahd, DSCOMMAND0, ahd_inb(ahd, DSCOMMAND0)|MPARCKEN|CACHETHEN);
6273 ahd_outb(ahd, DFF_THRSH, RD_DFTHRSH_75|WR_DFTHRSH_75);
6274 ahd_outb(ahd, SIMODE0, ENIOERR|ENOVERRUN);
6275 ahd_outb(ahd, SIMODE3, ENNTRAMPERR|ENOSRAMPERR);
6276 if ((ahd->bugs & AHD_BUSFREEREV_BUG) != 0) {
6277 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|AUTO_MSGOUT_DE);
6278 } else {
6279 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|BUSFREEREV|AUTO_MSGOUT_DE);
6280 }
6281 ahd_outb(ahd, SCSCHKN, CURRFIFODEF|WIDERESEN|SHVALIDSTDIS);
6282 if ((ahd->chip & AHD_BUS_MASK) == AHD_PCIX)
6283 /*
6284 * Do not issue a target abort when a split completion
6285 * error occurs. Let our PCIX interrupt handler deal
6286 * with it instead. H2A4 Razor #625
6287 */
6288 ahd_outb(ahd, PCIXCTL, ahd_inb(ahd, PCIXCTL) | SPLTSTADIS);
6289
6290 if ((ahd->bugs & AHD_LQOOVERRUN_BUG) != 0)
6291 ahd_outb(ahd, LQOSCSCTL, LQONOCHKOVER);
6292
6293 /*
6294 * Tweak IOCELL settings.
6295 */
6296 if ((ahd->flags & AHD_HP_BOARD) != 0) {
6297 for (i = 0; i < NUMDSPS; i++) {
6298 ahd_outb(ahd, DSPSELECT, i);
6299 ahd_outb(ahd, WRTBIASCTL, WRTBIASCTL_HP_DEFAULT);
6300 }
6301 #ifdef AHD_DEBUG
6302 if ((ahd_debug & AHD_SHOW_MISC) != 0)
6303 printf("%s: WRTBIASCTL now 0x%x\n", ahd_name(ahd),
6304 WRTBIASCTL_HP_DEFAULT);
6305 #endif
6306 }
6307 ahd_setup_iocell_workaround(ahd);
6308
6309 /*
6310 * Enable LQI Manager interrupts.
6311 */
6312 ahd_outb(ahd, LQIMODE1, ENLQIPHASE_LQ|ENLQIPHASE_NLQ|ENLIQABORT
6313 | ENLQICRCI_LQ|ENLQICRCI_NLQ|ENLQIBADLQI
6314 | ENLQIOVERI_LQ|ENLQIOVERI_NLQ);
6315 ahd_outb(ahd, LQOMODE0, ENLQOATNLQ|ENLQOATNPKT|ENLQOTCRC);
6316 /*
6317 * An interrupt from LQOBUSFREE is made redundant by the
6318 * BUSFREE interrupt. We choose to have the sequencer catch
6319 * LQOPHCHGINPKT errors manually for the command phase at the
6320 * start of a packetized selection case.
6321 ahd_outb(ahd, LQOMODE1, ENLQOBUSFREE|ENLQOPHACHGINPKT);
6322 */
6323 ahd_outb(ahd, LQOMODE1, 0);
6324
6325 /*
6326 * Setup sequencer interrupt handlers.
6327 */
6328 ahd_outw(ahd, INTVEC1_ADDR, ahd_resolve_seqaddr(ahd, LABEL_seq_isr));
6329 ahd_outw(ahd, INTVEC2_ADDR, ahd_resolve_seqaddr(ahd, LABEL_timer_isr));
6330
6331 /*
6332 * Setup SCB Offset registers.
6333 */
6334 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) {
6335 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb,
6336 pkt_long_lun));
6337 } else {
6338 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, lun));
6339 }
6340 ahd_outb(ahd, CMDLENPTR, offsetof(struct hardware_scb, cdb_len));
6341 ahd_outb(ahd, ATTRPTR, offsetof(struct hardware_scb, task_attribute));
6342 ahd_outb(ahd, FLAGPTR, offsetof(struct hardware_scb, task_management));
6343 ahd_outb(ahd, CMDPTR, offsetof(struct hardware_scb,
6344 shared_data.idata.cdb));
6345 ahd_outb(ahd, QNEXTPTR,
6346 offsetof(struct hardware_scb, next_hscb_busaddr));
6347 ahd_outb(ahd, ABRTBITPTR, MK_MESSAGE_BIT_OFFSET);
6348 ahd_outb(ahd, ABRTBYTEPTR, offsetof(struct hardware_scb, control));
6349 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) {
6350 ahd_outb(ahd, LUNLEN,
6351 sizeof(ahd->next_queued_hscb->pkt_long_lun) - 1);
6352 } else {
6353 ahd_outb(ahd, LUNLEN, LUNLEN_SINGLE_LEVEL_LUN);
6354 }
6355 ahd_outb(ahd, CDBLIMIT, SCB_CDB_LEN_PTR - 1);
6356 ahd_outb(ahd, MAXCMD, 0xFF);
6357 ahd_outb(ahd, SCBAUTOPTR,
6358 AUSCBPTR_EN | offsetof(struct hardware_scb, tag));
6359
6360 /* We haven't been enabled for target mode yet. */
6361 ahd_outb(ahd, MULTARGID, 0);
6362 ahd_outb(ahd, MULTARGID + 1, 0);
6363
6364 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
6365 /* Initialize the negotiation table. */
6366 if ((ahd->features & AHD_NEW_IOCELL_OPTS) == 0) {
6367 /*
6368 * Clear the spare bytes in the neg table to avoid
6369 * spurious parity errors.
6370 */
6371 for (target = 0; target < AHD_NUM_TARGETS; target++) {
6372 ahd_outb(ahd, NEGOADDR, target);
6373 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PER_DEV0);
6374 for (i = 0; i < AHD_NUM_PER_DEV_ANNEXCOLS; i++)
6375 ahd_outb(ahd, ANNEXDAT, 0);
6376 }
6377 }
6378
6379 for (target = 0; target < AHD_NUM_TARGETS; target++) {
6380 struct ahd_devinfo devinfo;
6381 struct ahd_initiator_tinfo *tinfo;
6382 struct ahd_tmode_tstate *tstate;
6383
6384 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
6385 target, &tstate);
6386 ahd_compile_devinfo(&devinfo, ahd->our_id,
6387 target, CAM_LUN_WILDCARD,
6388 'A', ROLE_INITIATOR);
6389 ahd_update_neg_table(ahd, &devinfo, &tinfo->curr);
6390 }
6391
6392 ahd_outb(ahd, CLRSINT3, NTRAMPERR|OSRAMPERR);
6393 ahd_outb(ahd, CLRINT, CLRSCSIINT);
6394
6395 #if NEEDS_MORE_TESTING
6396 /*
6397 * Always enable abort on incoming L_Qs if this feature is
6398 * supported. We use this to catch invalid SCB references.
6399 */
6400 if ((ahd->bugs & AHD_ABORT_LQI_BUG) == 0)
6401 ahd_outb(ahd, LQCTL1, ABORTPENDING);
6402 else
6403 #endif
6404 ahd_outb(ahd, LQCTL1, 0);
6405
6406 /* All of our queues are empty */
6407 ahd->qoutfifonext = 0;
6408 ahd->qoutfifonext_valid_tag = QOUTFIFO_ENTRY_VALID_LE;
6409 ahd_outb(ahd, QOUTFIFO_ENTRY_VALID_TAG, QOUTFIFO_ENTRY_VALID >> 8);
6410 for (i = 0; i < AHD_QOUT_SIZE; i++)
6411 ahd->qoutfifo[i] = 0;
6412 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_PREREAD);
6413
6414 ahd->qinfifonext = 0;
6415 for (i = 0; i < AHD_QIN_SIZE; i++)
6416 ahd->qinfifo[i] = SCB_LIST_NULL;
6417
6418 if ((ahd->features & AHD_TARGETMODE) != 0) {
6419 /* All target command blocks start out invalid. */
6420 for (i = 0; i < AHD_TMODE_CMDS; i++)
6421 ahd->targetcmds[i].cmd_valid = 0;
6422 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_PREREAD);
6423 ahd->tqinfifonext = 1;
6424 ahd_outb(ahd, KERNEL_TQINPOS, ahd->tqinfifonext - 1);
6425 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext);
6426 }
6427
6428 /* Initialize Scratch Ram. */
6429 ahd_outb(ahd, SEQ_FLAGS, 0);
6430 ahd_outb(ahd, SEQ_FLAGS2, 0);
6431
6432 /* We don't have any waiting selections */
6433 ahd_outw(ahd, WAITING_TID_HEAD, SCB_LIST_NULL);
6434 ahd_outw(ahd, WAITING_TID_TAIL, SCB_LIST_NULL);
6435 for (i = 0; i < AHD_NUM_TARGETS; i++) {
6436 ahd_outw(ahd, WAITING_SCB_TAILS + (2 * i), SCB_LIST_NULL);
6437 }
6438
6439 /*
6440 * Nobody is waiting to be DMAed into the QOUTFIFO.
6441 */
6442 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL);
6443 ahd_outw(ahd, COMPLETE_SCB_DMAINPROG_HEAD, SCB_LIST_NULL);
6444 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL);
6445
6446 /*
6447 * The Freeze Count is 0.
6448 */
6449 ahd_outw(ahd, QFREEZE_COUNT, 0);
6450
6451 /*
6452 * Tell the sequencer where it can find our arrays in memory.
6453 */
6454 busaddr = ahd->shared_data_map.physaddr;
6455 ahd_outb(ahd, SHARED_DATA_ADDR, busaddr & 0xFF);
6456 ahd_outb(ahd, SHARED_DATA_ADDR + 1, (busaddr >> 8) & 0xFF);
6457 ahd_outb(ahd, SHARED_DATA_ADDR + 2, (busaddr >> 16) & 0xFF);
6458 ahd_outb(ahd, SHARED_DATA_ADDR + 3, (busaddr >> 24) & 0xFF);
6459 ahd_outb(ahd, QOUTFIFO_NEXT_ADDR, busaddr & 0xFF);
6460 ahd_outb(ahd, QOUTFIFO_NEXT_ADDR + 1, (busaddr >> 8) & 0xFF);
6461 ahd_outb(ahd, QOUTFIFO_NEXT_ADDR + 2, (busaddr >> 16) & 0xFF);
6462 ahd_outb(ahd, QOUTFIFO_NEXT_ADDR + 3, (busaddr >> 24) & 0xFF);
6463 /*
6464 * Setup the allowed SCSI Sequences based on operational mode.
6465 * If we are a target, we'll enable select in operations once
6466 * we've had a lun enabled.
6467 */
6468 scsiseq_template = ENAUTOATNP;
6469 if ((ahd->flags & AHD_INITIATORROLE) != 0)
6470 scsiseq_template |= ENRSELI;
6471 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq_template);
6472
6473 /* There are no busy SCBs yet. */
6474 for (target = 0; target < AHD_NUM_TARGETS; target++) {
6475 int lun;
6476
6477 for (lun = 0; lun < AHD_NUM_LUNS_NONPKT; lun++)
6478 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(target, 'A', lun));
6479 }
6480
6481 /*
6482 * Initialize the group code to command length table.
6483 * Vendor Unique codes are set to 0 so we only capture
6484 * the first byte of the cdb. These can be overridden
6485 * when target mode is enabled.
6486 */
6487 ahd_outb(ahd, CMDSIZE_TABLE, 5);
6488 ahd_outb(ahd, CMDSIZE_TABLE + 1, 9);
6489 ahd_outb(ahd, CMDSIZE_TABLE + 2, 9);
6490 ahd_outb(ahd, CMDSIZE_TABLE + 3, 0);
6491 ahd_outb(ahd, CMDSIZE_TABLE + 4, 15);
6492 ahd_outb(ahd, CMDSIZE_TABLE + 5, 11);
6493 ahd_outb(ahd, CMDSIZE_TABLE + 6, 0);
6494 ahd_outb(ahd, CMDSIZE_TABLE + 7, 0);
6495
6496 /* Tell the sequencer of our initial queue positions */
6497 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
6498 ahd_outb(ahd, QOFF_CTLSTA, SCB_QSIZE_512);
6499 ahd->qinfifonext = 0;
6500 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
6501 ahd_set_hescb_qoff(ahd, 0);
6502 ahd_set_snscb_qoff(ahd, 0);
6503 ahd_set_sescb_qoff(ahd, 0);
6504 ahd_set_sdscb_qoff(ahd, 0);
6505
6506 /*
6507 * Tell the sequencer which SCB will be the next one it receives.
6508 */
6509 busaddr = ahd_le32toh(ahd->next_queued_hscb->hscb_busaddr);
6510 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 0, busaddr & 0xFF);
6511 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 1, (busaddr >> 8) & 0xFF);
6512 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 2, (busaddr >> 16) & 0xFF);
6513 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 3, (busaddr >> 24) & 0xFF);
6514
6515 /*
6516 * Default to coalescing disabled.
6517 */
6518 ahd_outw(ahd, INT_COALESCING_CMDCOUNT, 0);
6519 ahd_outw(ahd, CMDS_PENDING, 0);
6520 ahd_update_coalescing_values(ahd, ahd->int_coalescing_timer,
6521 ahd->int_coalescing_maxcmds,
6522 ahd->int_coalescing_mincmds);
6523 ahd_enable_coalescing(ahd, FALSE);
6524
6525 ahd_loadseq(ahd);
6526 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
6527 }
6528
6529 /*
6530 * Setup default device and controller settings.
6531 * This should only be called if our probe has
6532 * determined that no configuration data is available.
6533 */
6534 int
ahd_default_config(struct ahd_softc * ahd)6535 ahd_default_config(struct ahd_softc *ahd)
6536 {
6537 int targ;
6538
6539 ahd->our_id = 7;
6540
6541 /*
6542 * Allocate a tstate to house information for our
6543 * initiator presence on the bus as well as the user
6544 * data for any target mode initiator.
6545 */
6546 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) {
6547 printf("%s: unable to allocate ahd_tmode_tstate. "
6548 "Failing attach\n", ahd_name(ahd));
6549 return (ENOMEM);
6550 }
6551
6552 for (targ = 0; targ < AHD_NUM_TARGETS; targ++) {
6553 struct ahd_devinfo devinfo;
6554 struct ahd_initiator_tinfo *tinfo;
6555 struct ahd_tmode_tstate *tstate;
6556 uint16_t target_mask;
6557
6558 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
6559 targ, &tstate);
6560 /*
6561 * We support SPC2 and SPI4.
6562 */
6563 tinfo->user.protocol_version = 4;
6564 tinfo->user.transport_version = 4;
6565
6566 target_mask = 0x01 << targ;
6567 ahd->user_discenable |= target_mask;
6568 tstate->discenable |= target_mask;
6569 ahd->user_tagenable |= target_mask;
6570 #ifdef AHD_FORCE_160
6571 tinfo->user.period = AHD_SYNCRATE_DT;
6572 #else
6573 tinfo->user.period = AHD_SYNCRATE_160;
6574 #endif
6575 tinfo->user.offset= MAX_OFFSET;
6576 tinfo->user.ppr_options = MSG_EXT_PPR_RDSTRM
6577 | MSG_EXT_PPR_WRFLOW
6578 | MSG_EXT_PPR_HOLDMCS
6579 | MSG_EXT_PPR_IU_REQ
6580 | MSG_EXT_PPR_QAS_REQ
6581 | MSG_EXT_PPR_DT_REQ;
6582 if ((ahd->features & AHD_RTI) != 0)
6583 tinfo->user.ppr_options |= MSG_EXT_PPR_RTI;
6584
6585 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT;
6586
6587 /*
6588 * Start out Async/Narrow/Untagged and with
6589 * conservative protocol support.
6590 */
6591 tinfo->goal.protocol_version = 2;
6592 tinfo->goal.transport_version = 2;
6593 tinfo->curr.protocol_version = 2;
6594 tinfo->curr.transport_version = 2;
6595 ahd_compile_devinfo(&devinfo, ahd->our_id,
6596 targ, CAM_LUN_WILDCARD,
6597 'A', ROLE_INITIATOR);
6598 tstate->tagenable &= ~target_mask;
6599 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
6600 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE);
6601 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0,
6602 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL,
6603 /*paused*/TRUE);
6604 }
6605 return (0);
6606 }
6607
6608 /*
6609 * Parse device configuration information.
6610 */
6611 int
ahd_parse_cfgdata(struct ahd_softc * ahd,struct seeprom_config * sc)6612 ahd_parse_cfgdata(struct ahd_softc *ahd, struct seeprom_config *sc)
6613 {
6614 int targ;
6615 int max_targ;
6616
6617 max_targ = sc->max_targets & CFMAXTARG;
6618 ahd->our_id = sc->brtime_id & CFSCSIID;
6619
6620 /*
6621 * Allocate a tstate to house information for our
6622 * initiator presence on the bus as well as the user
6623 * data for any target mode initiator.
6624 */
6625 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) {
6626 printf("%s: unable to allocate ahd_tmode_tstate. "
6627 "Failing attach\n", ahd_name(ahd));
6628 return (ENOMEM);
6629 }
6630
6631 for (targ = 0; targ < max_targ; targ++) {
6632 struct ahd_devinfo devinfo;
6633 struct ahd_initiator_tinfo *tinfo;
6634 struct ahd_transinfo *user_tinfo;
6635 struct ahd_tmode_tstate *tstate;
6636 uint16_t target_mask;
6637
6638 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
6639 targ, &tstate);
6640 user_tinfo = &tinfo->user;
6641
6642 /*
6643 * We support SPC2 and SPI4.
6644 */
6645 tinfo->user.protocol_version = 4;
6646 tinfo->user.transport_version = 4;
6647
6648 target_mask = 0x01 << targ;
6649 ahd->user_discenable &= ~target_mask;
6650 tstate->discenable &= ~target_mask;
6651 ahd->user_tagenable &= ~target_mask;
6652 if (sc->device_flags[targ] & CFDISC) {
6653 tstate->discenable |= target_mask;
6654 ahd->user_discenable |= target_mask;
6655 ahd->user_tagenable |= target_mask;
6656 } else {
6657 /*
6658 * Cannot be packetized without disconnection.
6659 */
6660 sc->device_flags[targ] &= ~CFPACKETIZED;
6661 }
6662
6663 user_tinfo->ppr_options = 0;
6664 user_tinfo->period = (sc->device_flags[targ] & CFXFER);
6665 if (user_tinfo->period < CFXFER_ASYNC) {
6666 if (user_tinfo->period <= AHD_PERIOD_10MHz)
6667 user_tinfo->ppr_options |= MSG_EXT_PPR_DT_REQ;
6668 user_tinfo->offset = MAX_OFFSET;
6669 } else {
6670 user_tinfo->offset = 0;
6671 user_tinfo->period = AHD_ASYNC_XFER_PERIOD;
6672 }
6673 #ifdef AHD_FORCE_160
6674 if (user_tinfo->period <= AHD_SYNCRATE_160)
6675 user_tinfo->period = AHD_SYNCRATE_DT;
6676 #endif
6677
6678 if ((sc->device_flags[targ] & CFPACKETIZED) != 0) {
6679 user_tinfo->ppr_options |= MSG_EXT_PPR_RDSTRM
6680 | MSG_EXT_PPR_WRFLOW
6681 | MSG_EXT_PPR_HOLDMCS
6682 | MSG_EXT_PPR_IU_REQ;
6683 if ((ahd->features & AHD_RTI) != 0)
6684 user_tinfo->ppr_options |= MSG_EXT_PPR_RTI;
6685 }
6686
6687 if ((sc->device_flags[targ] & CFQAS) != 0)
6688 user_tinfo->ppr_options |= MSG_EXT_PPR_QAS_REQ;
6689
6690 if ((sc->device_flags[targ] & CFWIDEB) != 0)
6691 user_tinfo->width = MSG_EXT_WDTR_BUS_16_BIT;
6692 else
6693 user_tinfo->width = MSG_EXT_WDTR_BUS_8_BIT;
6694 #ifdef AHD_DEBUG
6695 if ((ahd_debug & AHD_SHOW_MISC) != 0)
6696 printf("(%d): %x:%x:%x:%x\n", targ, user_tinfo->width,
6697 user_tinfo->period, user_tinfo->offset,
6698 user_tinfo->ppr_options);
6699 #endif
6700 /*
6701 * Start out Async/Narrow/Untagged and with
6702 * conservative protocol support.
6703 */
6704 tstate->tagenable &= ~target_mask;
6705 tinfo->goal.protocol_version = 2;
6706 tinfo->goal.transport_version = 2;
6707 tinfo->curr.protocol_version = 2;
6708 tinfo->curr.transport_version = 2;
6709 ahd_compile_devinfo(&devinfo, ahd->our_id,
6710 targ, CAM_LUN_WILDCARD,
6711 'A', ROLE_INITIATOR);
6712 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
6713 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE);
6714 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0,
6715 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL,
6716 /*paused*/TRUE);
6717 }
6718
6719 ahd->flags &= ~AHD_SPCHK_ENB_A;
6720 if (sc->bios_control & CFSPARITY)
6721 ahd->flags |= AHD_SPCHK_ENB_A;
6722
6723 ahd->flags &= ~AHD_RESET_BUS_A;
6724 if (sc->bios_control & CFRESETB)
6725 ahd->flags |= AHD_RESET_BUS_A;
6726
6727 ahd->flags &= ~AHD_EXTENDED_TRANS_A;
6728 if (sc->bios_control & CFEXTEND)
6729 ahd->flags |= AHD_EXTENDED_TRANS_A;
6730
6731 ahd->flags &= ~AHD_BIOS_ENABLED;
6732 if ((sc->bios_control & CFBIOSSTATE) == CFBS_ENABLED)
6733 ahd->flags |= AHD_BIOS_ENABLED;
6734
6735 ahd->flags &= ~AHD_STPWLEVEL_A;
6736 if ((sc->adapter_control & CFSTPWLEVEL) != 0)
6737 ahd->flags |= AHD_STPWLEVEL_A;
6738
6739 return (0);
6740 }
6741
6742 /*
6743 * Parse device configuration information.
6744 */
6745 int
ahd_parse_vpddata(struct ahd_softc * ahd,struct vpd_config * vpd)6746 ahd_parse_vpddata(struct ahd_softc *ahd, struct vpd_config *vpd)
6747 {
6748 int error;
6749
6750 error = ahd_verify_vpd_cksum(vpd);
6751 if (error == 0)
6752 return (EINVAL);
6753 if ((vpd->bios_flags & VPDBOOTHOST) != 0)
6754 ahd->flags |= AHD_BOOT_CHANNEL;
6755 return (0);
6756 }
6757
6758 void
ahd_intr_enable(struct ahd_softc * ahd,int enable)6759 ahd_intr_enable(struct ahd_softc *ahd, int enable)
6760 {
6761 u_int hcntrl;
6762
6763 hcntrl = ahd_inb(ahd, HCNTRL);
6764 hcntrl &= ~INTEN;
6765 ahd->pause &= ~INTEN;
6766 ahd->unpause &= ~INTEN;
6767 if (enable) {
6768 hcntrl |= INTEN;
6769 ahd->pause |= INTEN;
6770 ahd->unpause |= INTEN;
6771 }
6772 ahd_outb(ahd, HCNTRL, hcntrl);
6773 }
6774
6775 void
ahd_update_coalescing_values(struct ahd_softc * ahd,u_int timer,u_int maxcmds,u_int mincmds)6776 ahd_update_coalescing_values(struct ahd_softc *ahd, u_int timer, u_int maxcmds,
6777 u_int mincmds)
6778 {
6779 if (timer > AHD_TIMER_MAX_US)
6780 timer = AHD_TIMER_MAX_US;
6781 ahd->int_coalescing_timer = timer;
6782
6783 if (maxcmds > AHD_INT_COALESCING_MAXCMDS_MAX)
6784 maxcmds = AHD_INT_COALESCING_MAXCMDS_MAX;
6785 if (mincmds > AHD_INT_COALESCING_MINCMDS_MAX)
6786 mincmds = AHD_INT_COALESCING_MINCMDS_MAX;
6787 ahd->int_coalescing_maxcmds = maxcmds;
6788 ahd_outw(ahd, INT_COALESCING_TIMER, timer / AHD_TIMER_US_PER_TICK);
6789 ahd_outb(ahd, INT_COALESCING_MAXCMDS, -maxcmds);
6790 ahd_outb(ahd, INT_COALESCING_MINCMDS, -mincmds);
6791 }
6792
6793 void
ahd_enable_coalescing(struct ahd_softc * ahd,int enable)6794 ahd_enable_coalescing(struct ahd_softc *ahd, int enable)
6795 {
6796
6797 ahd->hs_mailbox &= ~ENINT_COALESCE;
6798 if (enable)
6799 ahd->hs_mailbox |= ENINT_COALESCE;
6800 ahd_outb(ahd, HS_MAILBOX, ahd->hs_mailbox);
6801 ahd_flush_device_writes(ahd);
6802 ahd_run_qoutfifo(ahd);
6803 }
6804
6805 /*
6806 * Ensure that the card is paused in a location
6807 * outside of all critical sections and that all
6808 * pending work is completed prior to returning.
6809 * This routine should only be called from outside
6810 * an interrupt context.
6811 */
6812 void
ahd_pause_and_flushwork(struct ahd_softc * ahd)6813 ahd_pause_and_flushwork(struct ahd_softc *ahd)
6814 {
6815 u_int intstat;
6816 u_int maxloops;
6817 u_int qfreeze_cnt;
6818
6819 maxloops = 1000;
6820 ahd->flags |= AHD_ALL_INTERRUPTS;
6821 ahd_pause(ahd);
6822 /*
6823 * Increment the QFreeze Count so that the sequencer
6824 * will not start new selections. We do this only
6825 * until we are safely paused without further selections
6826 * pending.
6827 */
6828 ahd_outw(ahd, QFREEZE_COUNT, ahd_inw(ahd, QFREEZE_COUNT) + 1);
6829 ahd_outb(ahd, SEQ_FLAGS2, ahd_inb(ahd, SEQ_FLAGS2) | SELECTOUT_QFROZEN);
6830 do {
6831 struct scb *waiting_scb;
6832
6833 ahd_unpause(ahd);
6834 ahd_intr(ahd);
6835 ahd_pause(ahd);
6836 ahd_clear_critical_section(ahd);
6837 intstat = ahd_inb(ahd, INTSTAT);
6838 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
6839 if ((ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) == 0)
6840 ahd_outb(ahd, SCSISEQ0,
6841 ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
6842 /*
6843 * In the non-packetized case, the sequencer (for Rev A),
6844 * relies on ENSELO remaining set after SELDO. The hardware
6845 * auto-clears ENSELO in the packetized case.
6846 */
6847 waiting_scb = ahd_lookup_scb(ahd,
6848 ahd_inw(ahd, WAITING_TID_HEAD));
6849 if (waiting_scb != NULL
6850 && (waiting_scb->flags & SCB_PACKETIZED) == 0
6851 && (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) != 0)
6852 ahd_outb(ahd, SCSISEQ0,
6853 ahd_inb(ahd, SCSISEQ0) | ENSELO);
6854 } while (--maxloops
6855 && (intstat != 0xFF || (ahd->features & AHD_REMOVABLE) == 0)
6856 && ((intstat & INT_PEND) != 0
6857 || (ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0
6858 || (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) != 0));
6859 if (maxloops == 0) {
6860 printf("Infinite interrupt loop, INTSTAT = %x",
6861 ahd_inb(ahd, INTSTAT));
6862 }
6863 qfreeze_cnt = ahd_inw(ahd, QFREEZE_COUNT);
6864 if (qfreeze_cnt == 0) {
6865 printf("%s: ahd_pause_and_flushwork with 0 qfreeze count!\n",
6866 ahd_name(ahd));
6867 } else {
6868 qfreeze_cnt--;
6869 }
6870 ahd_outw(ahd, QFREEZE_COUNT, qfreeze_cnt);
6871 if (qfreeze_cnt == 0)
6872 ahd_outb(ahd, SEQ_FLAGS2,
6873 ahd_inb(ahd, SEQ_FLAGS2) & ~SELECTOUT_QFROZEN);
6874
6875 ahd_flush_qoutfifo(ahd);
6876
6877 ahd_platform_flushwork(ahd);
6878 ahd->flags &= ~AHD_ALL_INTERRUPTS;
6879 }
6880
6881 int
ahd_suspend(struct ahd_softc * ahd)6882 ahd_suspend(struct ahd_softc *ahd)
6883 {
6884
6885 ahd_pause_and_flushwork(ahd);
6886
6887 if (LIST_FIRST(&ahd->pending_scbs) != NULL) {
6888 ahd_unpause(ahd);
6889 return (EBUSY);
6890 }
6891 ahd_shutdown(ahd);
6892 return (0);
6893 }
6894
6895 int
ahd_resume(struct ahd_softc * ahd)6896 ahd_resume(struct ahd_softc *ahd)
6897 {
6898
6899 ahd_reset(ahd, /*reinit*/TRUE);
6900 ahd_intr_enable(ahd, TRUE);
6901 ahd_restart(ahd);
6902 return (0);
6903 }
6904
6905 /************************** Busy Target Table *********************************/
6906 /*
6907 * Set SCBPTR to the SCB that contains the busy
6908 * table entry for TCL. Return the offset into
6909 * the SCB that contains the entry for TCL.
6910 * saved_scbid is dereferenced and set to the
6911 * scbid that should be restored once manipulation
6912 * of the TCL entry is complete.
6913 */
6914 static inline u_int
ahd_index_busy_tcl(struct ahd_softc * ahd,u_int * saved_scbid,u_int tcl)6915 ahd_index_busy_tcl(struct ahd_softc *ahd, u_int *saved_scbid, u_int tcl)
6916 {
6917 /*
6918 * Index to the SCB that contains the busy entry.
6919 */
6920 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
6921 *saved_scbid = ahd_get_scbptr(ahd);
6922 ahd_set_scbptr(ahd, TCL_LUN(tcl)
6923 | ((TCL_TARGET_OFFSET(tcl) & 0xC) << 4));
6924
6925 /*
6926 * And now calculate the SCB offset to the entry.
6927 * Each entry is 2 bytes wide, hence the
6928 * multiplication by 2.
6929 */
6930 return (((TCL_TARGET_OFFSET(tcl) & 0x3) << 1) + SCB_DISCONNECTED_LISTS);
6931 }
6932
6933 /*
6934 * Return the untagged transaction id for a given target/channel lun.
6935 */
6936 u_int
ahd_find_busy_tcl(struct ahd_softc * ahd,u_int tcl)6937 ahd_find_busy_tcl(struct ahd_softc *ahd, u_int tcl)
6938 {
6939 u_int scbid;
6940 u_int scb_offset;
6941 u_int saved_scbptr;
6942
6943 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl);
6944 scbid = ahd_inw_scbram(ahd, scb_offset);
6945 ahd_set_scbptr(ahd, saved_scbptr);
6946 return (scbid);
6947 }
6948
6949 void
ahd_busy_tcl(struct ahd_softc * ahd,u_int tcl,u_int scbid)6950 ahd_busy_tcl(struct ahd_softc *ahd, u_int tcl, u_int scbid)
6951 {
6952 u_int scb_offset;
6953 u_int saved_scbptr;
6954
6955 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl);
6956 ahd_outw(ahd, scb_offset, scbid);
6957 ahd_set_scbptr(ahd, saved_scbptr);
6958 }
6959
6960 /************************** SCB and SCB queue management **********************/
6961 int
ahd_match_scb(struct ahd_softc * ahd,struct scb * scb,int target,char channel,int lun,u_int tag,role_t role)6962 ahd_match_scb(struct ahd_softc *ahd, struct scb *scb, int target,
6963 char channel, int lun, u_int tag, role_t role)
6964 {
6965 int targ = SCB_GET_TARGET(ahd, scb);
6966 char chan = SCB_GET_CHANNEL(ahd, scb);
6967 int slun = SCB_GET_LUN(scb);
6968 int match;
6969
6970 match = ((chan == channel) || (channel == ALL_CHANNELS));
6971 if (match != 0)
6972 match = ((targ == target) || (target == CAM_TARGET_WILDCARD));
6973 if (match != 0)
6974 match = ((lun == slun) || (lun == CAM_LUN_WILDCARD));
6975 if (match != 0) {
6976 #if AHD_TARGET_MODE
6977 int group;
6978
6979 group = XPT_FC_GROUP(scb->io_ctx->ccb_h.func_code);
6980 if (role == ROLE_INITIATOR) {
6981 match = (group != XPT_FC_GROUP_TMODE)
6982 && ((tag == SCB_GET_TAG(scb))
6983 || (tag == SCB_LIST_NULL));
6984 } else if (role == ROLE_TARGET) {
6985 match = (group == XPT_FC_GROUP_TMODE)
6986 && ((tag == scb->io_ctx->csio.tag_id)
6987 || (tag == SCB_LIST_NULL));
6988 }
6989 #else /* !AHD_TARGET_MODE */
6990 match = ((tag == SCB_GET_TAG(scb)) || (tag == SCB_LIST_NULL));
6991 #endif /* AHD_TARGET_MODE */
6992 }
6993
6994 return match;
6995 }
6996
6997 void
ahd_freeze_devq(struct ahd_softc * ahd,struct scb * scb)6998 ahd_freeze_devq(struct ahd_softc *ahd, struct scb *scb)
6999 {
7000 int target;
7001 char channel;
7002 int lun;
7003
7004 target = SCB_GET_TARGET(ahd, scb);
7005 lun = SCB_GET_LUN(scb);
7006 channel = SCB_GET_CHANNEL(ahd, scb);
7007
7008 ahd_search_qinfifo(ahd, target, channel, lun,
7009 /*tag*/SCB_LIST_NULL, ROLE_UNKNOWN,
7010 CAM_REQUEUE_REQ, SEARCH_COMPLETE);
7011
7012 ahd_platform_freeze_devq(ahd, scb);
7013 }
7014
7015 void
ahd_qinfifo_requeue_tail(struct ahd_softc * ahd,struct scb * scb)7016 ahd_qinfifo_requeue_tail(struct ahd_softc *ahd, struct scb *scb)
7017 {
7018 struct scb *prev_scb;
7019 ahd_mode_state saved_modes;
7020
7021 saved_modes = ahd_save_modes(ahd);
7022 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
7023 prev_scb = NULL;
7024 if (ahd_qinfifo_count(ahd) != 0) {
7025 u_int prev_tag;
7026 u_int prev_pos;
7027
7028 prev_pos = AHD_QIN_WRAP(ahd->qinfifonext - 1);
7029 prev_tag = ahd->qinfifo[prev_pos];
7030 prev_scb = ahd_lookup_scb(ahd, prev_tag);
7031 }
7032 ahd_qinfifo_requeue(ahd, prev_scb, scb);
7033 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
7034 ahd_restore_modes(ahd, saved_modes);
7035 }
7036
7037 static void
ahd_qinfifo_requeue(struct ahd_softc * ahd,struct scb * prev_scb,struct scb * scb)7038 ahd_qinfifo_requeue(struct ahd_softc *ahd, struct scb *prev_scb,
7039 struct scb *scb)
7040 {
7041 if (prev_scb == NULL) {
7042 uint32_t busaddr;
7043
7044 busaddr = ahd_le32toh(scb->hscb->hscb_busaddr);
7045 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 0, busaddr & 0xFF);
7046 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 1, (busaddr >> 8) & 0xFF);
7047 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 2, (busaddr >> 16) & 0xFF);
7048 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 3, (busaddr >> 24) & 0xFF);
7049 } else {
7050 prev_scb->hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr;
7051 ahd_sync_scb(ahd, prev_scb,
7052 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
7053 }
7054 ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb);
7055 ahd->qinfifonext++;
7056 scb->hscb->next_hscb_busaddr = ahd->next_queued_hscb->hscb_busaddr;
7057 ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
7058 }
7059
7060 static int
ahd_qinfifo_count(struct ahd_softc * ahd)7061 ahd_qinfifo_count(struct ahd_softc *ahd)
7062 {
7063 u_int qinpos;
7064 u_int wrap_qinpos;
7065 u_int wrap_qinfifonext;
7066
7067 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
7068 qinpos = ahd_get_snscb_qoff(ahd);
7069 wrap_qinpos = AHD_QIN_WRAP(qinpos);
7070 wrap_qinfifonext = AHD_QIN_WRAP(ahd->qinfifonext);
7071 if (wrap_qinfifonext >= wrap_qinpos)
7072 return (wrap_qinfifonext - wrap_qinpos);
7073 else
7074 return (wrap_qinfifonext
7075 + NUM_ELEMENTS(ahd->qinfifo) - wrap_qinpos);
7076 }
7077
7078 void
ahd_reset_cmds_pending(struct ahd_softc * ahd)7079 ahd_reset_cmds_pending(struct ahd_softc *ahd)
7080 {
7081 struct scb *scb;
7082 ahd_mode_state saved_modes;
7083 u_int pending_cmds;
7084
7085 saved_modes = ahd_save_modes(ahd);
7086 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
7087
7088 /*
7089 * Don't count any commands as outstanding that the
7090 * sequencer has already marked for completion.
7091 */
7092 ahd_flush_qoutfifo(ahd);
7093
7094 pending_cmds = 0;
7095 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
7096 pending_cmds++;
7097 }
7098 ahd_outw(ahd, CMDS_PENDING, pending_cmds - ahd_qinfifo_count(ahd));
7099 ahd_restore_modes(ahd, saved_modes);
7100 ahd->flags &= ~AHD_UPDATE_PEND_CMDS;
7101 }
7102
7103 int
ahd_search_qinfifo(struct ahd_softc * ahd,int target,char channel,int lun,u_int tag,role_t role,uint32_t status,ahd_search_action action)7104 ahd_search_qinfifo(struct ahd_softc *ahd, int target, char channel,
7105 int lun, u_int tag, role_t role, uint32_t status,
7106 ahd_search_action action)
7107 {
7108 struct scb *scb;
7109 struct scb *prev_scb;
7110 ahd_mode_state saved_modes;
7111 u_int qinstart;
7112 u_int qinpos;
7113 u_int qintail;
7114 u_int tid_next;
7115 u_int tid_prev;
7116 u_int scbid;
7117 u_int savedscbptr;
7118 uint32_t busaddr;
7119 int found;
7120 int targets;
7121 int pending_cmds;
7122
7123 /* Must be in CCHAN mode */
7124 saved_modes = ahd_save_modes(ahd);
7125 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
7126
7127 /*
7128 * Halt any pending SCB DMA. The sequencer will reinitiate
7129 * this DMA if the qinfifo is not empty once we unpause.
7130 */
7131 if ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN|CCSCBDIR))
7132 == (CCARREN|CCSCBEN|CCSCBDIR)) {
7133 ahd_outb(ahd, CCSCBCTL,
7134 ahd_inb(ahd, CCSCBCTL) & ~(CCARREN|CCSCBEN));
7135 while ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN)) != 0)
7136 ;
7137 }
7138 /* Determine sequencer's position in the qinfifo. */
7139 qintail = AHD_QIN_WRAP(ahd->qinfifonext);
7140 qinstart = ahd_get_snscb_qoff(ahd);
7141 qinpos = AHD_QIN_WRAP(qinstart);
7142 found = 0;
7143 prev_scb = NULL;
7144
7145 pending_cmds = 0;
7146 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
7147 pending_cmds++;
7148 }
7149 (void)ahd_qinfifo_count(ahd);
7150
7151 if (action == SEARCH_PRINT) {
7152 printf("qinstart = 0x%x qinfifonext = 0x%x\n",
7153 qinstart, ahd->qinfifonext);
7154 }
7155
7156 /*
7157 * Start with an empty queue. Entries that are not chosen
7158 * for removal will be re-added to the queue as we go.
7159 */
7160 ahd->qinfifonext = qinstart;
7161 busaddr = ahd_le32toh(ahd->next_queued_hscb->hscb_busaddr);
7162 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 0, busaddr & 0xFF);
7163 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 1, (busaddr >> 8) & 0xFF);
7164 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 2, (busaddr >> 16) & 0xFF);
7165 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 3, (busaddr >> 24) & 0xFF);
7166
7167 while (qinpos != qintail) {
7168 scb = ahd_lookup_scb(ahd, ahd->qinfifo[qinpos]);
7169 if (scb == NULL) {
7170 panic("Loop 1\n");
7171 }
7172
7173 if (ahd_match_scb(ahd, scb, target, channel, lun, tag, role)) {
7174 /*
7175 * We found an scb that needs to be acted on.
7176 */
7177 found++;
7178 switch (action) {
7179 case SEARCH_COMPLETE:
7180 {
7181 cam_status ostat;
7182 cam_status cstat;
7183
7184 ostat = ahd_get_scsi_status(scb);
7185 if (ostat == CAM_REQ_INPROG)
7186 ahd_set_scsi_status(scb, status);
7187 cstat = ahd_get_transaction_status(scb);
7188 if (cstat != CAM_REQ_CMP)
7189 ahd_freeze_scb(scb);
7190 if ((scb->flags & SCB_ACTIVE) == 0)
7191 printf("Inactive SCB in qinfifo\n");
7192 if ((cam_status)scb->xs->error != CAM_REQ_CMP)
7193 printf("SEARCH_COMPLETE(0x%x):"
7194 " ostat 0x%x, cstat 0x%x, "
7195 "xs_error 0x%x\n",
7196 SCB_GET_TAG(scb), ostat, cstat,
7197 scb->xs->error);
7198 ahd_done(ahd, scb);
7199
7200 /* FALLTHROUGH */
7201 }
7202 case SEARCH_REMOVE:
7203 break;
7204 case SEARCH_PRINT:
7205 printf(" 0x%x", ahd->qinfifo[qinpos]);
7206 /* FALLTHROUGH */
7207 case SEARCH_COUNT:
7208 ahd_qinfifo_requeue(ahd, prev_scb, scb);
7209 prev_scb = scb;
7210 break;
7211 }
7212 } else {
7213 ahd_qinfifo_requeue(ahd, prev_scb, scb);
7214 prev_scb = scb;
7215 }
7216 qinpos = AHD_QIN_WRAP(qinpos+1);
7217 }
7218
7219 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
7220
7221 if (action == SEARCH_PRINT)
7222 printf("\nWAITING_TID_QUEUES:\n");
7223
7224 /*
7225 * Search waiting for selection lists. We traverse the
7226 * list of "their ids" waiting for selection and, if
7227 * appropriate, traverse the SCBs of each "their id"
7228 * looking for matches.
7229 */
7230 savedscbptr = ahd_get_scbptr(ahd);
7231 tid_next = ahd_inw(ahd, WAITING_TID_HEAD);
7232 tid_prev = SCB_LIST_NULL;
7233 targets = 0;
7234 for (scbid = tid_next; !SCBID_IS_NULL(scbid); scbid = tid_next) {
7235 u_int tid_head;
7236
7237 /*
7238 * We limit based on the number of SCBs since
7239 * MK_MESSAGE SCBs are not in the per-tid lists.
7240 */
7241 targets++;
7242 if (targets > AHD_SCB_MAX) {
7243 panic("TID LIST LOOP");
7244 }
7245 if (scbid >= ahd->scb_data.numscbs) {
7246 printf("%s: Waiting TID List inconsistency. "
7247 "SCB index == 0x%x, yet numscbs == 0x%x.",
7248 ahd_name(ahd), scbid, ahd->scb_data.numscbs);
7249 ahd_dump_card_state(ahd);
7250 panic("for safety");
7251 }
7252 scb = ahd_lookup_scb(ahd, scbid);
7253 if (scb == NULL) {
7254 printf("%s: SCB = 0x%x Not Active!\n",
7255 ahd_name(ahd), scbid);
7256 panic("Waiting TID List traversal\n");
7257 break;
7258 }
7259 ahd_set_scbptr(ahd, scbid);
7260 tid_next = ahd_inw_scbram(ahd, SCB_NEXT2);
7261 if (ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD,
7262 SCB_LIST_NULL, ROLE_UNKNOWN) == 0) {
7263 tid_prev = scbid;
7264 continue;
7265 }
7266
7267 /*
7268 * We found a list of scbs that needs to be searched.
7269 */
7270 if (action == SEARCH_PRINT)
7271 printf(" %d ( ", SCB_GET_TARGET(ahd, scb));
7272 tid_head = scbid;
7273 found += ahd_search_scb_list(ahd, target, channel,
7274 lun, tag, role, status,
7275 action, &tid_head,
7276 SCB_GET_TARGET(ahd, scb));
7277 if (tid_head != scbid)
7278 ahd_stitch_tid_list(ahd, tid_prev, tid_head, tid_next);
7279 if (!SCBID_IS_NULL(tid_head))
7280 tid_prev = tid_head;
7281 if (action == SEARCH_PRINT)
7282 printf(")\n");
7283 }
7284 ahd_set_scbptr(ahd, savedscbptr);
7285 ahd_restore_modes(ahd, saved_modes);
7286 return (found);
7287 }
7288
7289 static int
ahd_search_scb_list(struct ahd_softc * ahd,int target,char channel,int lun,u_int tag,role_t role,uint32_t status,ahd_search_action action,u_int * list_head,u_int tid)7290 ahd_search_scb_list(struct ahd_softc *ahd, int target, char channel,
7291 int lun, u_int tag, role_t role, uint32_t status,
7292 ahd_search_action action, u_int *list_head, u_int tid)
7293 {
7294 struct scb *scb;
7295 u_int scbid;
7296 u_int next;
7297 u_int prev;
7298 int found;
7299
7300 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
7301 found = 0;
7302 prev = SCB_LIST_NULL;
7303 next = *list_head;
7304 for (scbid = next; !SCBID_IS_NULL(scbid); scbid = next) {
7305 if (scbid >= ahd->scb_data.numscbs) {
7306 printf("%s:SCB List inconsistency. "
7307 "SCB == 0x%x, yet numscbs == 0x%x.",
7308 ahd_name(ahd), scbid, ahd->scb_data.numscbs);
7309 ahd_dump_card_state(ahd);
7310 panic("for safety");
7311 }
7312 scb = ahd_lookup_scb(ahd, scbid);
7313 if (scb == NULL) {
7314 printf("%s: SCB = %d Not Active!\n",
7315 ahd_name(ahd), scbid);
7316 panic("Waiting List traversal\n");
7317 }
7318 ahd_set_scbptr(ahd, scbid);
7319 next = ahd_inw_scbram(ahd, SCB_NEXT);
7320 if (ahd_match_scb(ahd, scb, target, channel,
7321 lun, SCB_LIST_NULL, role) == 0) {
7322 prev = scbid;
7323 continue;
7324 }
7325 found++;
7326 switch (action) {
7327 case SEARCH_COMPLETE:
7328 {
7329 cam_status ostat;
7330 cam_status cstat;
7331
7332 ostat = ahd_get_scsi_status(scb);
7333 if (ostat == CAM_REQ_INPROG)
7334 ahd_set_scsi_status(scb, status);
7335 cstat = ahd_get_transaction_status(scb);
7336 if (cstat != CAM_REQ_CMP)
7337 ahd_freeze_scb(scb);
7338 if ((scb->flags & SCB_ACTIVE) == 0)
7339 printf("Inactive SCB in Waiting List\n");
7340 ahd_done(ahd, scb);
7341 }
7342 /* FALLTHROUGH */
7343 case SEARCH_REMOVE:
7344 ahd_rem_wscb(ahd, scbid, prev, next, tid);
7345 if (prev == SCB_LIST_NULL)
7346 *list_head = next;
7347 break;
7348 case SEARCH_PRINT:
7349 printf("0x%x ", scbid);
7350 /* FALLTHROUGH */
7351 case SEARCH_COUNT:
7352 prev = scbid;
7353 break;
7354 }
7355 if (found > AHD_SCB_MAX)
7356 panic("SCB LIST LOOP");
7357 }
7358 if (action == SEARCH_COMPLETE
7359 || action == SEARCH_REMOVE)
7360 ahd_outw(ahd, CMDS_PENDING, ahd_inw(ahd, CMDS_PENDING) - found);
7361 return (found);
7362 }
7363
7364 static void
ahd_stitch_tid_list(struct ahd_softc * ahd,u_int tid_prev,u_int tid_cur,u_int tid_next)7365 ahd_stitch_tid_list(struct ahd_softc *ahd, u_int tid_prev,
7366 u_int tid_cur, u_int tid_next)
7367 {
7368 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
7369
7370 if (SCBID_IS_NULL(tid_cur)) {
7371
7372 /* Bypass current TID list */
7373 if (SCBID_IS_NULL(tid_prev)) {
7374 ahd_outw(ahd, WAITING_TID_HEAD, tid_next);
7375 } else {
7376 ahd_set_scbptr(ahd, tid_prev);
7377 ahd_outw(ahd, SCB_NEXT2, tid_next);
7378 }
7379 if (SCBID_IS_NULL(tid_next))
7380 ahd_outw(ahd, WAITING_TID_TAIL, tid_prev);
7381 } else {
7382
7383 /* Stitch through tid_cur */
7384 if (SCBID_IS_NULL(tid_prev)) {
7385 ahd_outw(ahd, WAITING_TID_HEAD, tid_cur);
7386 } else {
7387 ahd_set_scbptr(ahd, tid_prev);
7388 ahd_outw(ahd, SCB_NEXT2, tid_cur);
7389 }
7390 ahd_set_scbptr(ahd, tid_cur);
7391 ahd_outw(ahd, SCB_NEXT2, tid_next);
7392
7393 if (SCBID_IS_NULL(tid_next))
7394 ahd_outw(ahd, WAITING_TID_TAIL, tid_cur);
7395 }
7396 }
7397
7398 /*
7399 * Manipulate the waiting for selection list and return the
7400 * scb that follows the one that we remove.
7401 */
7402 static u_int
ahd_rem_wscb(struct ahd_softc * ahd,u_int scbid,u_int prev,u_int next,u_int tid)7403 ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid,
7404 u_int prev, u_int next, u_int tid)
7405 {
7406 u_int tail_offset;
7407
7408 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
7409 if (!SCBID_IS_NULL(prev)) {
7410 ahd_set_scbptr(ahd, prev);
7411 ahd_outw(ahd, SCB_NEXT, next);
7412 }
7413
7414 /*
7415 * SCBs that had MK_MESSAGE set in them will not
7416 * be queued to the per-target lists, so don't
7417 * blindly clear the tail pointer.
7418 */
7419 tail_offset = WAITING_SCB_TAILS + (2 * tid);
7420 if (SCBID_IS_NULL(next)
7421 && ahd_inw(ahd, tail_offset) == scbid)
7422 ahd_outw(ahd, tail_offset, prev);
7423 ahd_add_scb_to_free_list(ahd, scbid);
7424 return (next);
7425 }
7426
7427 /*
7428 * Add the SCB as selected by SCBPTR onto the on chip list of
7429 * free hardware SCBs. This list is empty/unused if we are not
7430 * performing SCB paging.
7431 */
7432 static void
ahd_add_scb_to_free_list(struct ahd_softc * ahd,u_int scbid)7433 ahd_add_scb_to_free_list(struct ahd_softc *ahd, u_int scbid)
7434 {
7435 #ifdef notdef
7436 /* XXX Need some other mechanism to designate "free". */
7437 /*
7438 * Invalidate the tag so that our abort
7439 * routines don't think it's active.
7440 */
7441 ahd_outb(ahd, SCB_TAG, SCB_LIST_NULL);
7442 #endif
7443 }
7444
7445 /******************************** Error Handling ******************************/
7446 /*
7447 * Abort all SCBs that match the given description (target/channel/lun/tag),
7448 * setting their status to the passed in status if the status has not already
7449 * been modified from CAM_REQ_INPROG. This routine assumes that the sequencer
7450 * is paused before it is called.
7451 */
7452 int
ahd_abort_scbs(struct ahd_softc * ahd,int target,char channel,int lun,u_int tag,role_t role,uint32_t status)7453 ahd_abort_scbs(struct ahd_softc *ahd, int target, char channel,
7454 int lun, u_int tag, role_t role, uint32_t status)
7455 {
7456 struct scb *scbp;
7457 struct scb *scbp_next;
7458 u_int i, j;
7459 u_int maxtarget;
7460 u_int minlun;
7461 u_int maxlun;
7462 int found;
7463 ahd_mode_state saved_modes;
7464
7465 /* restore this when we're done */
7466 saved_modes = ahd_save_modes(ahd);
7467 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
7468
7469 found = ahd_search_qinfifo(ahd, target, channel, lun, SCB_LIST_NULL,
7470 role, CAM_REQUEUE_REQ, SEARCH_COMPLETE);
7471
7472 /*
7473 * Clean out the busy target table for any untagged commands.
7474 */
7475 i = 0;
7476 maxtarget = 16;
7477 if (target != CAM_TARGET_WILDCARD) {
7478 i = target;
7479 if (channel == 'B')
7480 i += 8;
7481 maxtarget = i + 1;
7482 }
7483
7484 if (lun == CAM_LUN_WILDCARD) {
7485 minlun = 0;
7486 maxlun = AHD_NUM_LUNS_NONPKT;
7487 } else if (lun >= AHD_NUM_LUNS_NONPKT) {
7488 minlun = maxlun = 0;
7489 } else {
7490 minlun = lun;
7491 maxlun = lun + 1;
7492 }
7493
7494 if (role != ROLE_TARGET) {
7495 for (;i < maxtarget; i++) {
7496 for (j = minlun;j < maxlun; j++) {
7497 u_int scbid;
7498 u_int tcl;
7499
7500 tcl = BUILD_TCL_RAW(i, 'A', j);
7501 scbid = ahd_find_busy_tcl(ahd, tcl);
7502 scbp = ahd_lookup_scb(ahd, scbid);
7503 if (scbp == NULL
7504 || ahd_match_scb(ahd, scbp, target, channel,
7505 lun, tag, role) == 0)
7506 continue;
7507 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(i, 'A', j));
7508 }
7509 }
7510 }
7511
7512 /*
7513 * Don't abort commands that have already completed,
7514 * but haven't quite made it up to the host yet.
7515 */
7516 ahd_flush_qoutfifo(ahd);
7517
7518 /*
7519 * Go through the pending CCB list and look for
7520 * commands for this target that are still active.
7521 * These are other tagged commands that were
7522 * disconnected when the reset occurred.
7523 */
7524 scbp_next = LIST_FIRST(&ahd->pending_scbs);
7525 while (scbp_next != NULL) {
7526 scbp = scbp_next;
7527 scbp_next = LIST_NEXT(scbp, pending_links);
7528 if (ahd_match_scb(ahd, scbp, target, channel, lun, tag, role)) {
7529 cam_status ostat;
7530
7531 ostat = ahd_get_scsi_status(scbp);
7532 if (ostat == CAM_REQ_INPROG)
7533 ahd_set_scsi_status(scbp, status);
7534 if (ahd_get_transaction_status(scbp) != CAM_REQ_CMP)
7535 ahd_freeze_scb(scbp);
7536 if ((scbp->flags & SCB_ACTIVE) == 0)
7537 printf("Inactive SCB on pending list\n");
7538 ahd_done(ahd, scbp);
7539 found++;
7540 }
7541 }
7542 ahd_restore_modes(ahd, saved_modes);
7543 ahd_platform_abort_scbs(ahd, target, channel, lun, tag, role, status);
7544 ahd->flags |= AHD_UPDATE_PEND_CMDS;
7545 return found;
7546 }
7547
7548 static void
ahd_reset_current_bus(struct ahd_softc * ahd)7549 ahd_reset_current_bus(struct ahd_softc *ahd)
7550 {
7551 uint8_t scsiseq;
7552
7553 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
7554 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) & ~ENSCSIRST);
7555 scsiseq = ahd_inb(ahd, SCSISEQ0) & ~(ENSELO|ENARBO|SCSIRSTO);
7556 ahd_outb(ahd, SCSISEQ0, scsiseq | SCSIRSTO);
7557 ahd_flush_device_writes(ahd);
7558 ahd_delay(AHD_BUSRESET_DELAY);
7559 /* Turn off the bus reset */
7560 ahd_outb(ahd, SCSISEQ0, scsiseq);
7561 ahd_flush_device_writes(ahd);
7562 ahd_delay(AHD_BUSRESET_DELAY);
7563 if ((ahd->bugs & AHD_SCSIRST_BUG) != 0) {
7564 /*
7565 * 2A Razor #474
7566 * Certain chip state is not cleared for
7567 * SCSI bus resets that we initiate, so
7568 * we must reset the chip.
7569 */
7570 ahd_reset(ahd, /*reinit*/TRUE);
7571 ahd_intr_enable(ahd, /*enable*/TRUE);
7572 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
7573 }
7574
7575 ahd_clear_intstat(ahd);
7576 }
7577
7578 int
ahd_reset_channel(struct ahd_softc * ahd,char channel,int initiate_reset)7579 ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset)
7580 {
7581 struct ahd_devinfo devinfo;
7582 u_int initiator;
7583 u_int target;
7584 u_int max_scsiid;
7585 int found;
7586 u_int fifo;
7587 u_int next_fifo;
7588
7589
7590 ahd->pending_device = NULL;
7591
7592 ahd_compile_devinfo(&devinfo,
7593 CAM_TARGET_WILDCARD,
7594 CAM_TARGET_WILDCARD,
7595 CAM_LUN_WILDCARD,
7596 channel, ROLE_UNKNOWN);
7597 ahd_pause(ahd);
7598
7599 /* Make sure the sequencer is in a safe location. */
7600 ahd_clear_critical_section(ahd);
7601
7602 #if AHD_TARGET_MODE
7603 if ((ahd->flags & AHD_TARGETROLE) != 0) {
7604 ahd_run_tqinfifo(ahd, /*paused*/TRUE);
7605 }
7606 #endif
7607 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
7608
7609 /*
7610 * Disable selections so no automatic hardware
7611 * functions will modify chip state.
7612 */
7613 ahd_outb(ahd, SCSISEQ0, 0);
7614 ahd_outb(ahd, SCSISEQ1, 0);
7615
7616 /*
7617 * Safely shut down our DMA engines. Always start with
7618 * the FIFO that is not currently active (if any are
7619 * actively connected).
7620 */
7621 next_fifo = fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO;
7622 if (next_fifo > CURRFIFO_1)
7623 /* If disconneced, arbitrarily start with FIFO1. */
7624 next_fifo = fifo = 0;
7625 do {
7626 next_fifo ^= CURRFIFO_1;
7627 ahd_set_modes(ahd, next_fifo, next_fifo);
7628 ahd_outb(ahd, DFCNTRL,
7629 ahd_inb(ahd, DFCNTRL) & ~(SCSIEN|HDMAEN));
7630 while ((ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0)
7631 ahd_delay(10);
7632 /*
7633 * Set CURRFIFO to the now inactive channel.
7634 */
7635 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
7636 ahd_outb(ahd, DFFSTAT, next_fifo);
7637 } while (next_fifo != fifo);
7638
7639 /*
7640 * Reset the bus if we are initiating this reset
7641 */
7642 ahd_clear_msg_state(ahd);
7643 ahd_outb(ahd, SIMODE1,
7644 ahd_inb(ahd, SIMODE1) & ~(ENBUSFREE|ENSCSIRST|ENBUSFREE));
7645
7646 if (initiate_reset)
7647 ahd_reset_current_bus(ahd);
7648
7649 ahd_clear_intstat(ahd);
7650
7651 /*
7652 * Clean up all the state information for the
7653 * pending transactions on this bus.
7654 */
7655 found = ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, channel,
7656 CAM_LUN_WILDCARD, SCB_LIST_NULL,
7657 ROLE_UNKNOWN, CAM_SCSI_BUS_RESET);
7658
7659 /*
7660 * Cleanup anything left in the FIFOs.
7661 */
7662 ahd_clear_fifo(ahd, 0);
7663 ahd_clear_fifo(ahd, 1);
7664
7665 /*
7666 * Revert to async/narrow transfers until we renegotiate.
7667 */
7668 max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7;
7669 for (target = 0; target <= max_scsiid; target++) {
7670
7671 if (ahd->enabled_targets[target] == NULL)
7672 continue;
7673 for (initiator = 0; initiator <= max_scsiid; initiator++) {
7674 struct ahd_devinfo dinfo;
7675
7676 ahd_compile_devinfo(&dinfo, target, initiator,
7677 CAM_LUN_WILDCARD,
7678 'A', ROLE_UNKNOWN);
7679 ahd_set_width(ahd, &dinfo, MSG_EXT_WDTR_BUS_8_BIT,
7680 AHD_TRANS_CUR, /*paused*/TRUE);
7681 ahd_set_syncrate(ahd, &dinfo, /*period*/0,
7682 /*offset*/0, /*ppr_options*/0,
7683 AHD_TRANS_CUR, /*paused*/TRUE);
7684 }
7685 }
7686
7687 #ifdef AHD_TARGET_MODE
7688 max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7;
7689
7690 /*
7691 * Send an immediate notify ccb to all target more peripheral
7692 * drivers affected by this action.
7693 */
7694 for (target = 0; target <= max_scsiid; target++) {
7695 struct ahd_tmode_tstate* tstate;
7696 u_int lun;
7697
7698 tstate = ahd->enabled_targets[target];
7699 if (tstate == NULL)
7700 continue;
7701 for (lun = 0; lun < AHD_NUM_LUNS; lun++) {
7702 struct ahd_tmode_lstate* lstate;
7703
7704 lstate = tstate->enabled_luns[lun];
7705 if (lstate == NULL)
7706 continue;
7707
7708 ahd_queue_lstate_event(ahd, lstate, CAM_TARGET_WILDCARD,
7709 EVENT_TYPE_BUS_RESET, /*arg*/0);
7710 ahd_send_lstate_events(ahd, lstate);
7711 }
7712 }
7713 #endif
7714
7715 /* Notify the XPT that a bus reset occurred */
7716 ahd_send_async(ahd, devinfo.channel, CAM_TARGET_WILDCARD,
7717 CAM_LUN_WILDCARD, AC_BUS_RESET, NULL);
7718 ahd_restart(ahd);
7719
7720 /*
7721 * Freeze the SIMQ until our poller can determine that
7722 * the bus reset has really gone away. We set the initial
7723 * timer to 0 to have the check performed as soon as possible
7724 * from the timer context.
7725 */
7726 if ((ahd->flags & AHD_RESET_POLL_ACTIVE) == 0) {
7727 ahd->flags |= AHD_RESET_POLL_ACTIVE;
7728 ahd_freeze_simq(ahd);
7729 ahd_timer_reset(&ahd->reset_timer, 0, ahd_reset_poll, ahd);
7730 }
7731 return (found);
7732 }
7733
7734
7735 #define AHD_RESET_POLL_US 1000
7736 static void
ahd_reset_poll(void * arg)7737 ahd_reset_poll(void *arg)
7738 {
7739 struct ahd_softc *ahd;
7740 u_int scsiseq1;
7741 u_long l;
7742 int s;
7743
7744 ahd_list_lock(&l);
7745 ahd = arg;
7746 if (ahd == NULL) {
7747 printf("ahd_reset_poll: Instance %p no longer exists\n", arg);
7748 ahd_list_unlock(&l);
7749 return;
7750 }
7751 ahd_lock(ahd, &s);
7752 ahd_pause(ahd);
7753 ahd_update_modes(ahd);
7754 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
7755 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI);
7756 if ((ahd_inb(ahd, SSTAT1) & SCSIRSTI) != 0) {
7757 ahd_timer_reset(&ahd->reset_timer, AHD_RESET_POLL_US,
7758 ahd_reset_poll, ahd);
7759 ahd_unpause(ahd);
7760 ahd_unlock(ahd, &s);
7761 ahd_list_unlock(&l);
7762 return;
7763 }
7764
7765 /* Reset is now low. Complete chip reinitialization. */
7766 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) | ENSCSIRST);
7767 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE);
7768 ahd_outb(ahd, SCSISEQ1, scsiseq1 & (ENSELI|ENRSELI|ENAUTOATNP));
7769 ahd_unpause(ahd);
7770 ahd->flags &= ~AHD_RESET_POLL_ACTIVE;
7771 ahd_unlock(ahd, &s);
7772 ahd_release_simq(ahd);
7773 ahd_list_unlock(&l);
7774 }
7775
7776 /**************************** Statistics Processing ***************************/
7777 static void
ahd_stat_timer(void * arg)7778 ahd_stat_timer(void *arg)
7779 {
7780 struct ahd_softc *ahd;
7781 u_long l;
7782 int s;
7783 int enint_coal;
7784
7785 ahd_list_lock(&l);
7786 ahd = arg;
7787 if (ahd == NULL) {
7788 printf("ahd_stat_timer: Instance %p no longer exists\n", arg);
7789 ahd_list_unlock(&l);
7790 return;
7791 }
7792 ahd_lock(ahd, &s);
7793
7794 enint_coal = ahd->hs_mailbox & ENINT_COALESCE;
7795 if (ahd->cmdcmplt_total > ahd->int_coalescing_threshold)
7796 enint_coal |= ENINT_COALESCE;
7797 else if (ahd->cmdcmplt_total < ahd->int_coalescing_stop_threshold)
7798 enint_coal &= ~ENINT_COALESCE;
7799
7800 if (enint_coal != (ahd->hs_mailbox & ENINT_COALESCE)) {
7801 ahd_enable_coalescing(ahd, enint_coal);
7802 #ifdef AHD_DEBUG
7803 if ((ahd_debug & AHD_SHOW_INT_COALESCING) != 0)
7804 printf("%s: Interrupt coalescing "
7805 "now %sabled. Cmds %d\n",
7806 ahd_name(ahd),
7807 (enint_coal & ENINT_COALESCE) ? "en" : "dis",
7808 ahd->cmdcmplt_total);
7809 #endif
7810 }
7811
7812 ahd->cmdcmplt_bucket = (ahd->cmdcmplt_bucket+1) & (AHD_STAT_BUCKETS-1);
7813 ahd->cmdcmplt_total -= ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket];
7814 ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket] = 0;
7815 ahd_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_US,
7816 ahd_stat_timer, ahd);
7817 ahd_unlock(ahd, &s);
7818 ahd_list_unlock(&l);
7819 }
7820
7821 /****************************** Status Processing *****************************/
7822 void
ahd_handle_scb_status(struct ahd_softc * ahd,struct scb * scb)7823 ahd_handle_scb_status(struct ahd_softc *ahd, struct scb *scb)
7824 {
7825 if (scb->hscb->shared_data.istatus.scsi_status != 0) {
7826 ahd_handle_scsi_status(ahd, scb);
7827 } else {
7828 ahd_calc_residual(ahd, scb);
7829 ahd_done(ahd, scb);
7830 }
7831 }
7832
7833 void
ahd_handle_scsi_status(struct ahd_softc * ahd,struct scb * scb)7834 ahd_handle_scsi_status(struct ahd_softc *ahd, struct scb *scb)
7835 {
7836 struct hardware_scb *hscb;
7837 u_int qfreeze_cnt;
7838
7839 /*
7840 * The sequencer freezes its select-out queue
7841 * anytime a SCSI status error occurs. We must
7842 * handle the error and decrement the QFREEZE count
7843 * to allow the sequencer to continue.
7844 */
7845 hscb = scb->hscb;
7846
7847 /* Freeze the queue until the client sees the error. */
7848 ahd_freeze_devq(ahd, scb);
7849 ahd_freeze_scb(scb);
7850 qfreeze_cnt = ahd_inw(ahd, QFREEZE_COUNT);
7851 if (qfreeze_cnt == 0) {
7852 printf("%s: Bad status with 0 qfreeze count!\n", ahd_name(ahd));
7853 } else {
7854 qfreeze_cnt--;
7855 ahd_outw(ahd, QFREEZE_COUNT, qfreeze_cnt);
7856 }
7857 if (qfreeze_cnt == 0)
7858 ahd_outb(ahd, SEQ_FLAGS2,
7859 ahd_inb(ahd, SEQ_FLAGS2) & ~SELECTOUT_QFROZEN);
7860
7861 /* Don't want to clobber the original sense code */
7862 if ((scb->flags & SCB_SENSE) != 0) {
7863 /*
7864 * Clear the SCB_SENSE Flag and perform
7865 * a normal command completion.
7866 */
7867 scb->flags &= ~SCB_SENSE;
7868 ahd_set_transaction_status(scb, CAM_AUTOSENSE_FAIL);
7869 ahd_done(ahd, scb);
7870 return;
7871 }
7872 ahd_set_scsi_status(scb, hscb->shared_data.istatus.scsi_status);
7873 ahd_set_xfer_status(scb, hscb->shared_data.istatus.scsi_status);
7874 switch (hscb->shared_data.istatus.scsi_status) {
7875 case STATUS_PKT_SENSE:
7876 {
7877 struct scsi_status_iu_header *siu;
7878
7879 ahd_sync_sense(ahd, scb, BUS_DMASYNC_POSTREAD);
7880 siu = (struct scsi_status_iu_header *)scb->sense_data;
7881 ahd_set_scsi_status(scb, siu->status);
7882 #ifdef AHD_DEBUG
7883 if ((ahd_debug & AHD_SHOW_SENSE) != 0) {
7884 ahd_print_path(ahd, scb);
7885 printf("SCB 0x%x Received PKT Status of 0x%x\n",
7886 SCB_GET_TAG(scb), siu->status);
7887 }
7888 #endif
7889 if ((siu->flags & SIU_RSPVALID) != 0) {
7890 scsipi_printaddr(scb->xs->xs_periph);
7891 if (scsi_4btoul(siu->pkt_failures_length) < 4) {
7892 printf("Unable to parse pkt_failures\n");
7893 } else {
7894
7895 switch (SIU_PKTFAIL_CODE(siu)) {
7896 case SIU_PFC_NONE:
7897 printf("No packet failure found\n");
7898 break;
7899 case SIU_PFC_CIU_FIELDS_INVALID:
7900 printf("Invalid Command IU Field\n");
7901 break;
7902 case SIU_PFC_TMF_NOT_SUPPORTED:
7903 printf("TMF not supportd\n");
7904 break;
7905 case SIU_PFC_TMF_FAILED:
7906 printf("TMF failed\n");
7907 break;
7908 case SIU_PFC_INVALID_TYPE_CODE:
7909 printf("Invalid L_Q Type code\n");
7910 break;
7911 case SIU_PFC_ILLEGAL_REQUEST:
7912 printf("Illegal request\n");
7913 default:
7914 break;
7915 }
7916 }
7917 if (siu->status == SCSI_STATUS_OK)
7918 ahd_set_transaction_status(scb,
7919 CAM_REQ_CMP_ERR);
7920 }
7921 if ((siu->flags & SIU_SNSVALID) != 0) {
7922 scb->flags |= SCB_PKT_SENSE;
7923 #ifdef AHD_DEBUG
7924 if ((ahd_debug & AHD_SHOW_SENSE) != 0) {
7925 printf("Sense data available (%d)\n",
7926 siu->sense_length[0]);
7927 printf("SK 0x%x ASC 0x%x ASCQ 0x%x\n",
7928 ((uint8_t)scb->sense_data[
7929 SIU_SENSE_OFFSET(siu)+2]) & 0x0F,
7930 ((uint8_t)scb->sense_data[
7931 SIU_SENSE_OFFSET(siu)+12]),
7932 ((uint8_t)scb->sense_data[
7933 SIU_SENSE_OFFSET(siu)+13]));
7934 }
7935 #endif
7936 }
7937 ahd_done(ahd, scb);
7938 break;
7939 }
7940 case SCSI_STATUS_CMD_TERMINATED:
7941 case SCSI_STATUS_CHECK_COND:
7942 {
7943 struct ahd_devinfo devinfo;
7944 struct ahd_dma_seg *sg;
7945 struct scsi_request_sense *sc;
7946 struct ahd_initiator_tinfo *targ_info;
7947 struct ahd_tmode_tstate *tstate;
7948 #ifdef AHD_DEBUG
7949 if (ahd_debug & AHD_SHOW_SENSE) {
7950 ahd_print_path(ahd, scb);
7951 printf("SCB %d: requests Check Status\n",
7952 SCB_GET_TAG(scb));
7953 }
7954 #endif
7955
7956 if (ahd_perform_autosense(scb) == 0)
7957 break;
7958
7959 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb),
7960 SCB_GET_TARGET(ahd, scb),
7961 SCB_GET_LUN(scb),
7962 SCB_GET_CHANNEL(ahd, scb),
7963 ROLE_INITIATOR);
7964 targ_info = ahd_fetch_transinfo(ahd,
7965 devinfo.channel,
7966 devinfo.our_scsiid,
7967 devinfo.target,
7968 &tstate);
7969 sg = scb->sg_list;
7970 sc = (struct scsi_request_sense *)hscb->shared_data.idata.cdb;
7971 /*
7972 * Save off the residual if there is one.
7973 */
7974 ahd_update_residual(ahd, scb);
7975 #ifdef AHD_DEBUG
7976 if (ahd_debug & AHD_SHOW_SENSE) {
7977 ahd_print_path(ahd, scb);
7978 printf("Sending Sense\n");
7979 }
7980 #endif
7981 scb->sg_count = 0;
7982 sg = ahd_sg_setup(ahd, scb, sg, ahd_get_sense_bufaddr(ahd, scb),
7983 ahd_get_sense_bufsize(ahd, scb),
7984 /*last*/TRUE);
7985 memset(sc, 0, sizeof(*sc));
7986 sc->opcode = SCSI_REQUEST_SENSE;
7987 sc->length = ahd_get_sense_bufsize(ahd, scb);
7988
7989 /*
7990 * We can't allow the target to disconnect.
7991 * This will be an untagged transaction and
7992 * having the target disconnect will make this
7993 * transaction indistinguishable from outstanding
7994 * tagged transactions.
7995 */
7996 hscb->control = 0;
7997
7998 /*
7999 * This request sense could be because the
8000 * the device lost power or in some other
8001 * way has lost our transfer negotiations.
8002 * Renegotiate if appropriate. Unit attention
8003 * errors will be reported before any data
8004 * phases occur.
8005 */
8006 if (ahd_get_residual(scb) == ahd_get_transfer_length(scb)) {
8007 ahd_update_neg_request(ahd, &devinfo,
8008 tstate, targ_info,
8009 AHD_NEG_IF_NON_ASYNC);
8010 }
8011 if (tstate->auto_negotiate & devinfo.target_mask) {
8012 hscb->control |= MK_MESSAGE;
8013 scb->flags &=
8014 ~(SCB_NEGOTIATE|SCB_ABORT|SCB_DEVICE_RESET);
8015 scb->flags |= SCB_AUTO_NEGOTIATE;
8016 }
8017 hscb->cdb_len = sizeof(*sc);
8018 ahd_setup_data_scb(ahd, scb);
8019 scb->flags |= SCB_SENSE;
8020 ahd_queue_scb(ahd, scb);
8021 /*
8022 * Ensure we have enough time to actually
8023 * retrieve the sense.
8024 */
8025 ahd_scb_timer_reset(scb, 5 * 1000000);
8026 break;
8027 }
8028 case SCSI_STATUS_OK:
8029 printf("%s: Interrupted for status of 0? (SCB 0x%x)\n",
8030 ahd_name(ahd), SCB_GET_TAG(scb));
8031 /* FALLTHROUGH */
8032 default:
8033 ahd_done(ahd, scb);
8034 break;
8035 }
8036 }
8037
8038 /*
8039 * Calculate the residual for a just completed SCB.
8040 */
8041 void
ahd_calc_residual(struct ahd_softc * ahd,struct scb * scb)8042 ahd_calc_residual(struct ahd_softc *ahd, struct scb *scb)
8043 {
8044 struct hardware_scb *hscb;
8045 struct initiator_status *spkt;
8046 uint32_t sgptr;
8047 uint32_t resid_sgptr;
8048 uint32_t resid;
8049
8050 /*
8051 * 5 cases.
8052 * 1) No residual.
8053 * SG_STATUS_VALID clear in sgptr.
8054 * 2) Transferless command
8055 * 3) Never performed any transfers.
8056 * sgptr has SG_FULL_RESID set.
8057 * 4) No residual but target did not
8058 * save data pointers after the
8059 * last transfer, so sgptr was
8060 * never updated.
8061 * 5) We have a partial residual.
8062 * Use residual_sgptr to determine
8063 * where we are.
8064 */
8065
8066 hscb = scb->hscb;
8067 sgptr = ahd_le32toh(hscb->sgptr);
8068 if ((sgptr & SG_STATUS_VALID) == 0)
8069 /* Case 1 */
8070 return;
8071 sgptr &= ~SG_STATUS_VALID;
8072
8073 if ((sgptr & SG_LIST_NULL) != 0)
8074 /* Case 2 */
8075 return;
8076
8077 /*
8078 * Residual fields are the same in both
8079 * target and initiator status packets,
8080 * so we can always use the initiator fields
8081 * regardless of the role for this SCB.
8082 */
8083 spkt = &hscb->shared_data.istatus;
8084 resid_sgptr = ahd_le32toh(spkt->residual_sgptr);
8085 if ((sgptr & SG_FULL_RESID) != 0) {
8086 /* Case 3 */
8087 resid = ahd_get_transfer_length(scb);
8088 } else if ((resid_sgptr & SG_LIST_NULL) != 0) {
8089 /* Case 4 */
8090 return;
8091 } else if ((resid_sgptr & SG_OVERRUN_RESID) != 0) {
8092 ahd_print_path(ahd, scb);
8093 printf("data overrun detected Tag == 0x%x.\n",
8094 SCB_GET_TAG(scb));
8095 ahd_freeze_devq(ahd, scb);
8096 ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
8097 ahd_freeze_scb(scb);
8098 return;
8099 } else if ((resid_sgptr & ~SG_PTR_MASK) != 0) {
8100 panic("Bogus resid sgptr value 0x%x\n", resid_sgptr);
8101 /* NOTREACHED */
8102 } else {
8103 struct ahd_dma_seg *sg;
8104
8105 /*
8106 * Remainder of the SG where the transfer
8107 * stopped.
8108 */
8109 resid = ahd_le32toh(spkt->residual_datacnt) & AHD_SG_LEN_MASK;
8110 sg = ahd_sg_bus_to_virt(ahd, scb, resid_sgptr & SG_PTR_MASK);
8111
8112 /* The residual sg_ptr always points to the next sg */
8113 sg--;
8114
8115 /*
8116 * Add up the contents of all residual
8117 * SG segments that are after the SG where
8118 * the transfer stopped.
8119 */
8120 while ((ahd_le32toh(sg->len) & AHD_DMA_LAST_SEG) == 0) {
8121 sg++;
8122 resid += ahd_le32toh(sg->len) & AHD_SG_LEN_MASK;
8123 }
8124 }
8125
8126 if ((scb->flags & SCB_SENSE) == 0)
8127 ahd_set_residual(scb, resid);
8128 /*else
8129 ahd_set_sense_residual(scb, resid);*/
8130
8131 #ifdef AHD_DEBUG
8132 if ((ahd_debug & AHD_SHOW_MISC) != 0) {
8133 ahd_print_path(ahd, scb);
8134 printf("Handled %sResidual of %d bytes\n",
8135 (scb->flags & SCB_SENSE) ? "Sense " : "", resid);
8136 }
8137 #endif
8138 }
8139
8140 /******************************* Target Mode **********************************/
8141 #ifdef AHD_TARGET_MODE
8142 /*
8143 * Add a target mode event to this lun's queue
8144 */
8145 static void
ahd_queue_lstate_event(struct ahd_softc * ahd,struct ahd_tmode_lstate * lstate,u_int initiator_id,u_int event_type,u_int event_arg)8146 ahd_queue_lstate_event(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate,
8147 u_int initiator_id, u_int event_type, u_int event_arg)
8148 {
8149 struct ahd_tmode_event *event;
8150 int pending;
8151
8152 xpt_freeze_devq(lstate->path, /*count*/1);
8153 if (lstate->event_w_idx >= lstate->event_r_idx)
8154 pending = lstate->event_w_idx - lstate->event_r_idx;
8155 else
8156 pending = AHD_TMODE_EVENT_BUFFER_SIZE + 1
8157 - (lstate->event_r_idx - lstate->event_w_idx);
8158
8159 if (event_type == EVENT_TYPE_BUS_RESET
8160 || event_type == MSG_BUS_DEV_RESET) {
8161 /*
8162 * Any earlier events are irrelevant, so reset our buffer.
8163 * This has the effect of allowing us to deal with reset
8164 * floods (an external device holding down the reset line)
8165 * without losing the event that is really interesting.
8166 */
8167 lstate->event_r_idx = 0;
8168 lstate->event_w_idx = 0;
8169 xpt_release_devq(lstate->path, pending, /*runqueue*/FALSE);
8170 }
8171
8172 if (pending == AHD_TMODE_EVENT_BUFFER_SIZE) {
8173 xpt_print_path(lstate->path);
8174 printf("immediate event %x:%x lost\n",
8175 lstate->event_buffer[lstate->event_r_idx].event_type,
8176 lstate->event_buffer[lstate->event_r_idx].event_arg);
8177 lstate->event_r_idx++;
8178 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE)
8179 lstate->event_r_idx = 0;
8180 xpt_release_devq(lstate->path, /*count*/1, /*runqueue*/FALSE);
8181 }
8182
8183 event = &lstate->event_buffer[lstate->event_w_idx];
8184 event->initiator_id = initiator_id;
8185 event->event_type = event_type;
8186 event->event_arg = event_arg;
8187 lstate->event_w_idx++;
8188 if (lstate->event_w_idx == AHD_TMODE_EVENT_BUFFER_SIZE)
8189 lstate->event_w_idx = 0;
8190 }
8191
8192 /*
8193 * Send any target mode events queued up waiting
8194 * for immediate notify resources.
8195 */
8196 void
ahd_send_lstate_events(struct ahd_softc * ahd,struct ahd_tmode_lstate * lstate)8197 ahd_send_lstate_events(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate)
8198 {
8199 struct ccb_hdr *ccbh;
8200 struct ccb_immed_notify *inot;
8201
8202 while (lstate->event_r_idx != lstate->event_w_idx
8203 && (ccbh = SLIST_FIRST(&lstate->immed_notifies)) != NULL) {
8204 struct ahd_tmode_event *event;
8205
8206 event = &lstate->event_buffer[lstate->event_r_idx];
8207 SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle);
8208 inot = (struct ccb_immed_notify *)ccbh;
8209 switch (event->event_type) {
8210 case EVENT_TYPE_BUS_RESET:
8211 ccbh->status = CAM_SCSI_BUS_RESET|CAM_DEV_QFRZN;
8212 break;
8213 default:
8214 ccbh->status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN;
8215 inot->message_args[0] = event->event_type;
8216 inot->message_args[1] = event->event_arg;
8217 break;
8218 }
8219 inot->initiator_id = event->initiator_id;
8220 inot->sense_len = 0;
8221 xpt_done((union ccb *)inot);
8222 lstate->event_r_idx++;
8223 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE)
8224 lstate->event_r_idx = 0;
8225 }
8226 }
8227 #endif
8228
8229 /******************** Sequencer Program Patching/Download *********************/
8230
8231 #ifdef AHD_DUMP_SEQ
8232 void
ahd_dumpseq(struct ahd_softc * ahd)8233 ahd_dumpseq(struct ahd_softc* ahd)
8234 {
8235 int i;
8236 int max_prog;
8237
8238 max_prog = 2048;
8239
8240 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM);
8241 ahd_outb(ahd, PRGMCNT, 0);
8242 ahd_outb(ahd, PRGMCNT+1, 0);
8243 for (i = 0; i < max_prog; i++) {
8244 uint8_t ins_bytes[4];
8245
8246 ahd_insb(ahd, SEQRAM, ins_bytes, 4);
8247 printf("0x%08x\n", ins_bytes[0] << 24
8248 | ins_bytes[1] << 16
8249 | ins_bytes[2] << 8
8250 | ins_bytes[3]);
8251 }
8252 }
8253 #endif
8254
8255 static void __noinline
ahd_loadseq(struct ahd_softc * ahd)8256 ahd_loadseq(struct ahd_softc *ahd)
8257 {
8258 struct cs cs_table[NUM_CRITICAL_SECTIONS];
8259 u_int begin_set[NUM_CRITICAL_SECTIONS];
8260 u_int end_set[NUM_CRITICAL_SECTIONS];
8261 const struct patch *cur_patch;
8262 u_int cs_count;
8263 u_int cur_cs;
8264 u_int i;
8265 int downloaded;
8266 u_int skip_addr;
8267 u_int sg_prefetch_cnt;
8268 u_int sg_prefetch_cnt_limit;
8269 u_int sg_prefetch_align;
8270 u_int sg_size;
8271 uint8_t download_consts[DOWNLOAD_CONST_COUNT];
8272
8273 if (bootverbose)
8274 printf("%s: Downloading Sequencer Program...",
8275 ahd_name(ahd));
8276
8277 #if DOWNLOAD_CONST_COUNT != 7
8278 #error "Download Const Mismatch"
8279 #endif
8280 /*
8281 * Start out with 0 critical sections
8282 * that apply to this firmware load.
8283 */
8284 cs_count = 0;
8285 cur_cs = 0;
8286 memset(begin_set, 0, sizeof(begin_set));
8287 memset(end_set, 0, sizeof(end_set));
8288
8289 /*
8290 * Setup downloadable constant table.
8291 *
8292 * The computation for the S/G prefetch variables is
8293 * a bit complicated. We would like to always fetch
8294 * in terms of cachelined sized increments. However,
8295 * if the cacheline is not an even multiple of the
8296 * SG element size or is larger than our SG RAM, using
8297 * just the cache size might leave us with only a portion
8298 * of an SG element at the tail of a prefetch. If the
8299 * cacheline is larger than our S/G prefetch buffer less
8300 * the size of an SG element, we may round down to a cacheline
8301 * that doesn't contain any or all of the S/G of interest
8302 * within the bounds of our S/G ram. Provide variables to
8303 * the sequencer that will allow it to handle these edge
8304 * cases.
8305 */
8306 /* Start by aligning to the nearest cacheline. */
8307 sg_prefetch_align = ahd->pci_cachesize;
8308 if (sg_prefetch_align == 0)
8309 sg_prefetch_align = 8;
8310 /* Round down to the nearest power of 2. */
8311 while (powerof2(sg_prefetch_align) == 0)
8312 sg_prefetch_align--;
8313 /*
8314 * If the cacheline boundary is greater than half our prefetch RAM
8315 * we risk not being able to fetch even a single complete S/G
8316 * segment if we align to that boundary.
8317 */
8318 if (sg_prefetch_align > CCSGADDR_MAX/2)
8319 sg_prefetch_align = CCSGADDR_MAX/2;
8320 /* Start by fetching a single cacheline. */
8321 sg_prefetch_cnt = sg_prefetch_align;
8322 /*
8323 * Increment the prefetch count by cachelines until
8324 * at least one S/G element will fit.
8325 */
8326 sg_size = sizeof(struct ahd_dma_seg);
8327 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0)
8328 sg_size = sizeof(struct ahd_dma64_seg);
8329 while (sg_prefetch_cnt < sg_size)
8330 sg_prefetch_cnt += sg_prefetch_align;
8331 /*
8332 * If the cacheline is not an even multiple of
8333 * the S/G size, we may only get a partial S/G when
8334 * we align. Add a cacheline if this is the case.
8335 */
8336 if ((sg_prefetch_align % sg_size) != 0
8337 && (sg_prefetch_cnt < CCSGADDR_MAX))
8338 sg_prefetch_cnt += sg_prefetch_align;
8339 /*
8340 * Lastly, compute a value that the sequencer can use
8341 * to determine if the remainder of the CCSGRAM buffer
8342 * has a full S/G element in it.
8343 */
8344 sg_prefetch_cnt_limit = -(sg_prefetch_cnt - sg_size + 1);
8345 download_consts[SG_PREFETCH_CNT] = sg_prefetch_cnt;
8346 download_consts[SG_PREFETCH_CNT_LIMIT] = sg_prefetch_cnt_limit;
8347 download_consts[SG_PREFETCH_ALIGN_MASK] = ~(sg_prefetch_align - 1);
8348 download_consts[SG_PREFETCH_ADDR_MASK] = (sg_prefetch_align - 1);
8349 download_consts[SG_SIZEOF] = sg_size;
8350 download_consts[PKT_OVERRUN_BUFOFFSET] =
8351 (ahd->overrun_buf - (uint8_t *)ahd->qoutfifo) / 256;
8352 download_consts[SCB_TRANSFER_SIZE] = SCB_TRANSFER_SIZE_1BYTE_LUN;
8353 cur_patch = patches;
8354 downloaded = 0;
8355 skip_addr = 0;
8356 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM);
8357 ahd_outb(ahd, PRGMCNT, 0);
8358 ahd_outb(ahd, PRGMCNT+1, 0);
8359
8360 for (i = 0; i < sizeof(seqprog)/4; i++) {
8361 if (ahd_check_patch(ahd, &cur_patch, i, &skip_addr) == 0) {
8362 /*
8363 * Don't download this instruction as it
8364 * is in a patch that was removed.
8365 */
8366 continue;
8367 }
8368 /*
8369 * Move through the CS table until we find a CS
8370 * that might apply to this instruction.
8371 */
8372 for (; cur_cs < num_critical_sections; cur_cs++) {
8373 if (critical_sections[cur_cs].end <= i) {
8374 if (begin_set[cs_count] == TRUE
8375 && end_set[cs_count] == FALSE) {
8376 cs_table[cs_count].end = downloaded;
8377 end_set[cs_count] = TRUE;
8378 cs_count++;
8379 }
8380 continue;
8381 }
8382 if (critical_sections[cur_cs].begin <= i
8383 && begin_set[cs_count] == FALSE) {
8384 cs_table[cs_count].begin = downloaded;
8385 begin_set[cs_count] = TRUE;
8386 }
8387 break;
8388 }
8389 ahd_download_instr(ahd, i, download_consts);
8390 downloaded++;
8391 }
8392
8393 ahd->num_critical_sections = cs_count;
8394 if (cs_count != 0) {
8395
8396 cs_count *= sizeof(struct cs);
8397 ahd->critical_sections = malloc(cs_count, M_DEVBUF, M_NOWAIT);
8398 if (ahd->critical_sections == NULL)
8399 panic("ahd_loadseq: Could not malloc");
8400 memcpy(ahd->critical_sections, cs_table, cs_count);
8401 }
8402 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE);
8403
8404 if (bootverbose) {
8405 printf(" %d instructions downloaded\n", downloaded);
8406 printf("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n",
8407 ahd_name(ahd), ahd->features, ahd->bugs, ahd->flags);
8408 }
8409 }
8410
8411 static int
ahd_check_patch(struct ahd_softc * ahd,const struct patch ** start_patch,u_int start_instr,u_int * skip_addr)8412 ahd_check_patch(struct ahd_softc *ahd, const struct patch **start_patch,
8413 u_int start_instr, u_int *skip_addr)
8414 {
8415 const struct patch *cur_patch;
8416 const struct patch *last_patch;
8417 u_int num_patches;
8418
8419 num_patches = sizeof(patches)/sizeof(struct patch);
8420 last_patch = &patches[num_patches];
8421 cur_patch = *start_patch;
8422
8423 while (cur_patch < last_patch && start_instr == cur_patch->begin) {
8424
8425 if (cur_patch->patch_func(ahd) == 0) {
8426
8427 /* Start rejecting code */
8428 *skip_addr = start_instr + cur_patch->skip_instr;
8429 cur_patch += cur_patch->skip_patch;
8430 } else {
8431 /* Accepted this patch. Advance to the next
8432 * one and wait for our instruction pointer to
8433 * hit this point.
8434 */
8435 cur_patch++;
8436 }
8437 }
8438
8439 *start_patch = cur_patch;
8440 if (start_instr < *skip_addr)
8441 /* Still skipping */
8442 return (0);
8443
8444 return (1);
8445 }
8446
8447 static u_int
ahd_resolve_seqaddr(struct ahd_softc * ahd,u_int address)8448 ahd_resolve_seqaddr(struct ahd_softc *ahd, u_int address)
8449 {
8450 const struct patch *cur_patch;
8451 int address_offset;
8452 u_int skip_addr;
8453 u_int i;
8454
8455 address_offset = 0;
8456 cur_patch = patches;
8457 skip_addr = 0;
8458
8459 for (i = 0; i < address;) {
8460
8461 ahd_check_patch(ahd, &cur_patch, i, &skip_addr);
8462
8463 if (skip_addr > i) {
8464 int end_addr;
8465
8466 end_addr = MIN(address, skip_addr);
8467 address_offset += end_addr - i;
8468 i = skip_addr;
8469 } else {
8470 i++;
8471 }
8472 }
8473 return (address - address_offset);
8474 }
8475
8476 static void
ahd_download_instr(struct ahd_softc * ahd,u_int instrptr,uint8_t * dconsts)8477 ahd_download_instr(struct ahd_softc *ahd, u_int instrptr, uint8_t *dconsts)
8478 {
8479 union ins_formats instr;
8480 struct ins_format1 *fmt1_ins;
8481 struct ins_format3 *fmt3_ins;
8482 u_int opcode;
8483
8484 /*
8485 * The firmware is always compiled into a little endian format.
8486 */
8487 instr.integer = ahd_le32toh(*(const uint32_t*)&seqprog[instrptr * 4]);
8488
8489 fmt1_ins = &instr.format1;
8490 fmt3_ins = NULL;
8491
8492 /* Pull the opcode */
8493 opcode = instr.format1.opcode;
8494 switch (opcode) {
8495 case AIC_OP_JMP:
8496 case AIC_OP_JC:
8497 case AIC_OP_JNC:
8498 case AIC_OP_CALL:
8499 case AIC_OP_JNE:
8500 case AIC_OP_JNZ:
8501 case AIC_OP_JE:
8502 case AIC_OP_JZ:
8503 {
8504 fmt3_ins = &instr.format3;
8505 fmt3_ins->address = ahd_resolve_seqaddr(ahd, fmt3_ins->address);
8506 }
8507 /* FALLTHROUGH */
8508 case AIC_OP_OR:
8509 case AIC_OP_AND:
8510 case AIC_OP_XOR:
8511 case AIC_OP_ADD:
8512 case AIC_OP_ADC:
8513 case AIC_OP_BMOV:
8514 if (fmt1_ins->parity != 0) {
8515 fmt1_ins->immediate = dconsts[fmt1_ins->immediate];
8516 }
8517 fmt1_ins->parity = 0;
8518 /* FALLTHROUGH */
8519 case AIC_OP_ROL:
8520 {
8521 int i, count;
8522
8523 /* Calculate odd parity for the instruction */
8524 for (i = 0, count = 0; i < 31; i++) {
8525 uint32_t mask;
8526
8527 mask = 0x01 << i;
8528 if ((instr.integer & mask) != 0)
8529 count++;
8530 }
8531 if ((count & 0x01) == 0)
8532 instr.format1.parity = 1;
8533
8534 /* The sequencer is a little endian CPU */
8535 instr.integer = ahd_htole32(instr.integer);
8536 ahd_outsb(ahd, SEQRAM, instr.bytes, 4);
8537 break;
8538 }
8539 default:
8540 panic("Unknown opcode encountered in seq program");
8541 break;
8542 }
8543 }
8544
8545 static int
ahd_probe_stack_size(struct ahd_softc * ahd)8546 ahd_probe_stack_size(struct ahd_softc *ahd)
8547 {
8548 int last_probe;
8549
8550 last_probe = 0;
8551 while (1) {
8552 int i;
8553
8554 /*
8555 * We avoid using 0 as a pattern to avoid
8556 * confusion if the stack implementation
8557 * "back-fills" with zeros when "poping'
8558 * entries.
8559 */
8560 for (i = 1; i <= last_probe+1; i++) {
8561 ahd_outb(ahd, STACK, i & 0xFF);
8562 ahd_outb(ahd, STACK, (i >> 8) & 0xFF);
8563 }
8564
8565 /* Verify */
8566 for (i = last_probe+1; i > 0; i--) {
8567 u_int stack_entry;
8568
8569 stack_entry = ahd_inb(ahd, STACK)
8570 |(ahd_inb(ahd, STACK) << 8);
8571 if (stack_entry != i)
8572 goto sized;
8573 }
8574 last_probe++;
8575 }
8576 sized:
8577 return (last_probe);
8578 }
8579
8580 void
ahd_dump_all_cards_state(void)8581 ahd_dump_all_cards_state(void)
8582 {
8583 struct ahd_softc *list_ahd;
8584
8585 TAILQ_FOREACH(list_ahd, &ahd_tailq, links) {
8586 ahd_dump_card_state(list_ahd);
8587 }
8588 }
8589
8590 int
ahd_print_register(ahd_reg_parse_entry_t * table,u_int num_entries,const char * name,u_int address,u_int value,u_int * cur_column,u_int wrap_point)8591 ahd_print_register(ahd_reg_parse_entry_t *table, u_int num_entries,
8592 const char *name, u_int address, u_int value,
8593 u_int *cur_column, u_int wrap_point)
8594 {
8595 size_t printed;
8596 u_int printed_mask;
8597 char line[1024];
8598
8599 line[0] = 0;
8600
8601 if (cur_column != NULL && *cur_column >= wrap_point) {
8602 printf("\n");
8603 *cur_column = 0;
8604 }
8605 printed = snprintf(line, sizeof(line), "%s[0x%x]", name, value);
8606 printed = sizeof(line);
8607 if (table == NULL) {
8608 if (printed < sizeof(line))
8609 printed += snprintf(&line[printed],
8610 (sizeof line) - printed, " ");
8611 printf("%s", line);
8612 if (cur_column != NULL)
8613 *cur_column += printed;
8614 return (printed);
8615 }
8616 printed_mask = 0;
8617 while (printed_mask != 0xFF) {
8618 int entry;
8619
8620 for (entry = 0; entry < num_entries; entry++) {
8621 if (((value & table[entry].mask)
8622 != table[entry].value)
8623 || ((printed_mask & table[entry].mask)
8624 == table[entry].mask))
8625 continue;
8626 if (printed < sizeof(line))
8627 printed += snprintf(&line[printed],
8628 (sizeof line) - printed, "%s%s",
8629 printed_mask == 0 ? ":(" : "|",
8630 table[entry].name);
8631 printed_mask |= table[entry].mask;
8632
8633 break;
8634 }
8635 if (entry >= num_entries)
8636 break;
8637 }
8638 if (printed < sizeof(line)) {
8639 if (printed_mask != 0)
8640 printed += snprintf(&line[printed],
8641 (sizeof line) - printed, ") ");
8642 else
8643 printed += snprintf(&line[printed],
8644 (sizeof line) - printed, " ");
8645 }
8646 if (cur_column != NULL)
8647 *cur_column += printed;
8648 printf("%s", line);
8649
8650 return (printed);
8651 }
8652
8653 void
ahd_dump_card_state(struct ahd_softc * ahd)8654 ahd_dump_card_state(struct ahd_softc *ahd)
8655 {
8656 struct scb *scb;
8657 ahd_mode_state saved_modes;
8658 u_int dffstat;
8659 int paused;
8660 u_int scb_index;
8661 u_int saved_scb_index;
8662 u_int cur_col;
8663 int i;
8664
8665 if (ahd_is_paused(ahd)) {
8666 paused = 1;
8667 } else {
8668 paused = 0;
8669 ahd_pause(ahd);
8670 }
8671 saved_modes = ahd_save_modes(ahd);
8672 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
8673 printf(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n"
8674 "%s: Dumping Card State at program address 0x%x Mode 0x%x\n",
8675 ahd_name(ahd),
8676 ahd_inb(ahd, CURADDR) | (ahd_inb(ahd, CURADDR+1) << 8),
8677 ahd_build_mode_state(ahd, ahd->saved_src_mode,
8678 ahd->saved_dst_mode));
8679 if (paused)
8680 printf("Card was paused\n");
8681
8682 if (ahd_check_cmdcmpltqueues(ahd))
8683 printf("Completions are pending\n");
8684 /*
8685 * Mode independent registers.
8686 */
8687 cur_col = 0;
8688 ahd_hs_mailbox_print(ahd_inb(ahd, LOCAL_HS_MAILBOX), &cur_col, 50);
8689 ahd_intctl_print(ahd_inb(ahd, INTCTL), &cur_col, 50);
8690 ahd_seqintstat_print(ahd_inb(ahd, SEQINTSTAT), &cur_col, 50);
8691 ahd_saved_mode_print(ahd_inb(ahd, SAVED_MODE), &cur_col, 50);
8692 ahd_dffstat_print(ahd_inb(ahd, DFFSTAT), &cur_col, 50);
8693 ahd_scsisigi_print(ahd_inb(ahd, SCSISIGI), &cur_col, 50);
8694 ahd_scsiphase_print(ahd_inb(ahd, SCSIPHASE), &cur_col, 50);
8695 ahd_scsibus_print(ahd_inb(ahd, SCSIBUS), &cur_col, 50);
8696 ahd_lastphase_print(ahd_inb(ahd, LASTPHASE), &cur_col, 50);
8697 ahd_scsiseq0_print(ahd_inb(ahd, SCSISEQ0), &cur_col, 50);
8698 ahd_scsiseq1_print(ahd_inb(ahd, SCSISEQ1), &cur_col, 50);
8699 ahd_seqctl0_print(ahd_inb(ahd, SEQCTL0), &cur_col, 50);
8700 ahd_seqintctl_print(ahd_inb(ahd, SEQINTCTL), &cur_col, 50);
8701 ahd_seq_flags_print(ahd_inb(ahd, SEQ_FLAGS), &cur_col, 50);
8702 ahd_seq_flags2_print(ahd_inb(ahd, SEQ_FLAGS2), &cur_col, 50);
8703 ahd_sstat0_print(ahd_inb(ahd, SSTAT0), &cur_col, 50);
8704 ahd_sstat1_print(ahd_inb(ahd, SSTAT1), &cur_col, 50);
8705 ahd_sstat2_print(ahd_inb(ahd, SSTAT2), &cur_col, 50);
8706 ahd_sstat3_print(ahd_inb(ahd, SSTAT3), &cur_col, 50);
8707 ahd_perrdiag_print(ahd_inb(ahd, PERRDIAG), &cur_col, 50);
8708 ahd_simode1_print(ahd_inb(ahd, SIMODE1), &cur_col, 50);
8709 ahd_lqistat0_print(ahd_inb(ahd, LQISTAT0), &cur_col, 50);
8710 ahd_lqistat1_print(ahd_inb(ahd, LQISTAT1), &cur_col, 50);
8711 ahd_lqistat2_print(ahd_inb(ahd, LQISTAT2), &cur_col, 50);
8712 ahd_lqostat0_print(ahd_inb(ahd, LQOSTAT0), &cur_col, 50);
8713 ahd_lqostat1_print(ahd_inb(ahd, LQOSTAT1), &cur_col, 50);
8714 ahd_lqostat2_print(ahd_inb(ahd, LQOSTAT2), &cur_col, 50);
8715 printf("\n");
8716 printf("\nSCB Count = %d CMDS_PENDING = %d LASTSCB 0x%x "
8717 "CURRSCB 0x%x NEXTSCB 0x%x\n",
8718 ahd->scb_data.numscbs, ahd_inw(ahd, CMDS_PENDING),
8719 ahd_inw(ahd, LASTSCB), ahd_inw(ahd, CURRSCB),
8720 ahd_inw(ahd, NEXTSCB));
8721 cur_col = 0;
8722 /* QINFIFO */
8723 ahd_search_qinfifo(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS,
8724 CAM_LUN_WILDCARD, SCB_LIST_NULL,
8725 ROLE_UNKNOWN, /*status*/0, SEARCH_PRINT);
8726 saved_scb_index = ahd_get_scbptr(ahd);
8727 printf("Pending list:");
8728 i = 0;
8729 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
8730 if (i++ > AHD_SCB_MAX)
8731 break;
8732 /*cur_col =*/ printf("\n%3d FIFO_USE[0x%x] ", SCB_GET_TAG(scb),
8733 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT));
8734 ahd_set_scbptr(ahd, SCB_GET_TAG(scb));
8735 ahd_scb_control_print(ahd_inb_scbram(ahd, SCB_CONTROL),
8736 &cur_col, 60);
8737 ahd_scb_scsiid_print(ahd_inb_scbram(ahd, SCB_SCSIID),
8738 &cur_col, 60);
8739 }
8740 printf("\nTotal %d\n", i);
8741
8742 printf("Kernel Free SCB list: ");
8743 i = 0;
8744 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) {
8745 struct scb *list_scb;
8746
8747 list_scb = scb;
8748 do {
8749 printf("%d ", SCB_GET_TAG(list_scb));
8750 list_scb = LIST_NEXT(list_scb, collision_links);
8751 } while (list_scb && i++ < AHD_SCB_MAX);
8752 }
8753
8754 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) {
8755 if (i++ > AHD_SCB_MAX)
8756 break;
8757 printf("%d ", SCB_GET_TAG(scb));
8758 }
8759 printf("\n");
8760
8761 printf("Sequencer Complete DMA-inprog list: ");
8762 scb_index = ahd_inw(ahd, COMPLETE_SCB_DMAINPROG_HEAD);
8763 i = 0;
8764 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) {
8765 ahd_set_scbptr(ahd, scb_index);
8766 printf("%d ", scb_index);
8767 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
8768 }
8769 printf("\n");
8770
8771 printf("Sequencer Complete list: ");
8772 scb_index = ahd_inw(ahd, COMPLETE_SCB_HEAD);
8773 i = 0;
8774 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) {
8775 ahd_set_scbptr(ahd, scb_index);
8776 printf("%d ", scb_index);
8777 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
8778 }
8779 printf("\n");
8780
8781
8782 printf("Sequencer DMA-Up and Complete list: ");
8783 scb_index = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD);
8784 i = 0;
8785 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) {
8786 ahd_set_scbptr(ahd, scb_index);
8787 printf("%d ", scb_index);
8788 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
8789 }
8790 printf("\n");
8791 ahd_set_scbptr(ahd, saved_scb_index);
8792 dffstat = ahd_inb(ahd, DFFSTAT);
8793 for (i = 0; i < 2; i++) {
8794 #ifdef AHD_DEBUG
8795 struct scb *fifo_scb;
8796 #endif
8797 u_int fifo_scbptr;
8798
8799 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i);
8800 fifo_scbptr = ahd_get_scbptr(ahd);
8801 printf("\n%s: FIFO%d %s, LONGJMP == 0x%x, SCB 0x%x\n",
8802 ahd_name(ahd), i,
8803 (dffstat & (FIFO0FREE << i)) ? "Free" : "Active",
8804 ahd_inw(ahd, LONGJMP_ADDR), fifo_scbptr);
8805 cur_col = 0;
8806 ahd_seqimode_print(ahd_inb(ahd, SEQIMODE), &cur_col, 50);
8807 ahd_seqintsrc_print(ahd_inb(ahd, SEQINTSRC), &cur_col, 50);
8808 ahd_dfcntrl_print(ahd_inb(ahd, DFCNTRL), &cur_col, 50);
8809 ahd_dfstatus_print(ahd_inb(ahd, DFSTATUS), &cur_col, 50);
8810 ahd_sg_cache_shadow_print(ahd_inb(ahd, SG_CACHE_SHADOW),
8811 &cur_col, 50);
8812 ahd_sg_state_print(ahd_inb(ahd, SG_STATE), &cur_col, 50);
8813 ahd_dffsxfrctl_print(ahd_inb(ahd, DFFSXFRCTL), &cur_col, 50);
8814 ahd_soffcnt_print(ahd_inb(ahd, SOFFCNT), &cur_col, 50);
8815 ahd_mdffstat_print(ahd_inb(ahd, MDFFSTAT), &cur_col, 50);
8816 if (cur_col > 50) {
8817 printf("\n");
8818 cur_col = 0;
8819 }
8820 printf("\nSHADDR = 0x%x%x, SHCNT = 0x%x ",
8821 ahd_inl(ahd, SHADDR+4),
8822 ahd_inl(ahd, SHADDR),
8823 (ahd_inb(ahd, SHCNT)
8824 | (ahd_inb(ahd, SHCNT + 1) << 8)
8825 | (ahd_inb(ahd, SHCNT + 2) << 16)));
8826 printf("HADDR = 0x%x%x, HCNT = 0x%x \n",
8827 ahd_inl(ahd, HADDR+4),
8828 ahd_inl(ahd, HADDR),
8829 (ahd_inb(ahd, HCNT)
8830 | (ahd_inb(ahd, HCNT + 1) << 8)
8831 | (ahd_inb(ahd, HCNT + 2) << 16)));
8832 ahd_ccsgctl_print(ahd_inb(ahd, CCSGCTL), &cur_col, 50);
8833 #ifdef AHD_DEBUG
8834 if ((ahd_debug & AHD_SHOW_SG) != 0) {
8835 fifo_scb = ahd_lookup_scb(ahd, fifo_scbptr);
8836 if (fifo_scb != NULL)
8837 ahd_dump_sglist(fifo_scb);
8838 }
8839 #endif
8840 }
8841 printf("\nLQIN: ");
8842 for (i = 0; i < 20; i++)
8843 printf("0x%x ", ahd_inb(ahd, LQIN + i));
8844 printf("\n");
8845 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
8846 printf("%s: LQISTATE = 0x%x, LQOSTATE = 0x%x, OPTIONMODE = 0x%x\n",
8847 ahd_name(ahd), ahd_inb(ahd, LQISTATE), ahd_inb(ahd, LQOSTATE),
8848 ahd_inb(ahd, OPTIONMODE));
8849 printf("%s: OS_SPACE_CNT = 0x%x MAXCMDCNT = 0x%x\n",
8850 ahd_name(ahd), ahd_inb(ahd, OS_SPACE_CNT),
8851 ahd_inb(ahd, MAXCMDCNT));
8852 ahd_simode0_print(ahd_inb(ahd, SIMODE0), &cur_col, 50);
8853 printf("\n");
8854 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
8855 cur_col = 0;
8856 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode);
8857 printf("%s: REG0 == 0x%x, SINDEX = 0x%x, DINDEX = 0x%x\n",
8858 ahd_name(ahd), ahd_inw(ahd, REG0), ahd_inw(ahd, SINDEX),
8859 ahd_inw(ahd, DINDEX));
8860 printf("%s: SCBPTR == 0x%x, SCB_NEXT == 0x%x, SCB_NEXT2 == 0x%x\n",
8861 ahd_name(ahd), ahd_get_scbptr(ahd),
8862 ahd_inw_scbram(ahd, SCB_NEXT),
8863 ahd_inw_scbram(ahd, SCB_NEXT2));
8864 printf("CDB %x %x %x %x %x %x\n",
8865 ahd_inb_scbram(ahd, SCB_CDB_STORE),
8866 ahd_inb_scbram(ahd, SCB_CDB_STORE+1),
8867 ahd_inb_scbram(ahd, SCB_CDB_STORE+2),
8868 ahd_inb_scbram(ahd, SCB_CDB_STORE+3),
8869 ahd_inb_scbram(ahd, SCB_CDB_STORE+4),
8870 ahd_inb_scbram(ahd, SCB_CDB_STORE+5));
8871 printf("STACK:");
8872 for (i = 0; i < ahd->stack_size; i++) {
8873 ahd->saved_stack[i] =
8874 ahd_inb(ahd, STACK)|(ahd_inb(ahd, STACK) << 8);
8875 printf(" 0x%x", ahd->saved_stack[i]);
8876 }
8877 for (i = ahd->stack_size-1; i >= 0; i--) {
8878 ahd_outb(ahd, STACK, ahd->saved_stack[i] & 0xFF);
8879 ahd_outb(ahd, STACK, (ahd->saved_stack[i] >> 8) & 0xFF);
8880 }
8881 printf("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n");
8882 ahd_platform_dump_card_state(ahd);
8883 ahd_restore_modes(ahd, saved_modes);
8884 if (paused == 0)
8885 ahd_unpause(ahd);
8886 }
8887
8888 void
ahd_dump_scbs(struct ahd_softc * ahd)8889 ahd_dump_scbs(struct ahd_softc *ahd)
8890 {
8891 ahd_mode_state saved_modes;
8892 u_int saved_scb_index;
8893 int i;
8894
8895 saved_modes = ahd_save_modes(ahd);
8896 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
8897 saved_scb_index = ahd_get_scbptr(ahd);
8898 for (i = 0; i < AHD_SCB_MAX; i++) {
8899 ahd_set_scbptr(ahd, i);
8900 printf("%3d", i);
8901 printf("(CTRL 0x%x ID 0x%x N 0x%x N2 0x%x SG 0x%x, RSG 0x%x)\n",
8902 ahd_inb_scbram(ahd, SCB_CONTROL),
8903 ahd_inb_scbram(ahd, SCB_SCSIID),
8904 ahd_inw_scbram(ahd, SCB_NEXT),
8905 ahd_inw_scbram(ahd, SCB_NEXT2),
8906 ahd_inl_scbram(ahd, SCB_SGPTR),
8907 ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR));
8908 }
8909 printf("\n");
8910 ahd_set_scbptr(ahd, saved_scb_index);
8911 ahd_restore_modes(ahd, saved_modes);
8912 }
8913
8914 /**************************** Flexport Logic **********************************/
8915 /*
8916 * Read count 16bit words from 16bit word address start_addr from the
8917 * SEEPROM attached to the controller, into tbuf, using the controller's
8918 * SEEPROM reading state machine. Optionally treat the data as a byte
8919 * stream in terms of byte order.
8920 */
8921 int
ahd_read_seeprom(struct ahd_softc * ahd,uint16_t * tbuf,u_int start_addr,u_int count,int bytestream)8922 ahd_read_seeprom(struct ahd_softc *ahd, uint16_t *tbuf,
8923 u_int start_addr, u_int count, int bytestream)
8924 {
8925 u_int cur_addr;
8926 u_int end_addr;
8927 int error;
8928
8929 /*
8930 * If we never make it through the loop even once,
8931 * we were passed invalid arguments.
8932 */
8933 error = EINVAL;
8934 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
8935 end_addr = start_addr + count;
8936 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) {
8937
8938 ahd_outb(ahd, SEEADR, cur_addr);
8939 ahd_outb(ahd, SEECTL, SEEOP_READ | SEESTART);
8940
8941 error = ahd_wait_seeprom(ahd);
8942 if (error) {
8943 printf("%s: ahd_wait_seeprom timed out\n",
8944 ahd_name(ahd));
8945 break;
8946 }
8947 if (bytestream != 0) {
8948 uint8_t *bytestream_ptr;
8949
8950 bytestream_ptr = (uint8_t *)tbuf;
8951 *bytestream_ptr++ = ahd_inb(ahd, SEEDAT);
8952 *bytestream_ptr = ahd_inb(ahd, SEEDAT+1);
8953 } else {
8954 /*
8955 * ahd_inw() already handles machine byte order.
8956 */
8957 *tbuf = ahd_inw(ahd, SEEDAT);
8958 }
8959 tbuf++;
8960 }
8961 return (error);
8962 }
8963
8964 /*
8965 * Write count 16bit words from tbuf, into SEEPROM attache to the
8966 * controller starting at 16bit word address start_addr, using the
8967 * controller's SEEPROM writing state machine.
8968 */
8969 int
ahd_write_seeprom(struct ahd_softc * ahd,uint16_t * tbuf,u_int start_addr,u_int count)8970 ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *tbuf,
8971 u_int start_addr, u_int count)
8972 {
8973 u_int cur_addr;
8974 u_int end_addr;
8975 int error;
8976 int retval;
8977
8978 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
8979 error = ENOENT;
8980
8981 /* Place the chip into write-enable mode */
8982 ahd_outb(ahd, SEEADR, SEEOP_EWEN_ADDR);
8983 ahd_outb(ahd, SEECTL, SEEOP_EWEN | SEESTART);
8984 error = ahd_wait_seeprom(ahd);
8985 if (error)
8986 return (error);
8987
8988 /*
8989 * Write the data. If we don't get throught the loop at
8990 * least once, the arguments were invalid.
8991 */
8992 retval = EINVAL;
8993 end_addr = start_addr + count;
8994 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) {
8995 ahd_outw(ahd, SEEDAT, *tbuf++);
8996 ahd_outb(ahd, SEEADR, cur_addr);
8997 ahd_outb(ahd, SEECTL, SEEOP_WRITE | SEESTART);
8998
8999 retval = ahd_wait_seeprom(ahd);
9000 if (retval)
9001 break;
9002 }
9003
9004 /*
9005 * Disable writes.
9006 */
9007 ahd_outb(ahd, SEEADR, SEEOP_EWDS_ADDR);
9008 ahd_outb(ahd, SEECTL, SEEOP_EWDS | SEESTART);
9009 error = ahd_wait_seeprom(ahd);
9010 if (error)
9011 return (error);
9012 return (retval);
9013 }
9014
9015 /*
9016 * Wait ~100us for the serial eeprom to satisfy our request.
9017 */
9018 int
ahd_wait_seeprom(struct ahd_softc * ahd)9019 ahd_wait_seeprom(struct ahd_softc *ahd)
9020 {
9021 int cnt;
9022
9023 cnt = 2000;
9024 while ((ahd_inb(ahd, SEESTAT) & (SEEARBACK|SEEBUSY)) != 0 && --cnt)
9025 ahd_delay(5);
9026
9027 if (cnt == 0)
9028 return (ETIMEDOUT);
9029 return (0);
9030 }
9031
9032 /*
9033 * Validate the two checksums in the per_channel
9034 * vital product data struct.
9035 */
9036 int
ahd_verify_vpd_cksum(struct vpd_config * vpd)9037 ahd_verify_vpd_cksum(struct vpd_config *vpd)
9038 {
9039 int i;
9040 int maxaddr;
9041 uint32_t checksum;
9042 uint8_t *vpdarray;
9043
9044 vpdarray = (uint8_t *)vpd;
9045 maxaddr = offsetof(struct vpd_config, vpd_checksum);
9046 checksum = 0;
9047 for (i = offsetof(struct vpd_config, resource_type); i < maxaddr; i++)
9048 checksum = checksum + vpdarray[i];
9049 if (checksum == 0
9050 || (-checksum & 0xFF) != vpd->vpd_checksum)
9051 return (0);
9052
9053 checksum = 0;
9054 maxaddr = offsetof(struct vpd_config, checksum);
9055 for (i = offsetof(struct vpd_config, default_target_flags);
9056 i < maxaddr; i++)
9057 checksum = checksum + vpdarray[i];
9058 if (checksum == 0
9059 || (-checksum & 0xFF) != vpd->checksum)
9060 return (0);
9061 return (1);
9062 }
9063
9064 int
ahd_verify_cksum(struct seeprom_config * sc)9065 ahd_verify_cksum(struct seeprom_config *sc)
9066 {
9067 int i;
9068 int maxaddr;
9069 uint32_t checksum;
9070 uint16_t *scarray;
9071
9072 maxaddr = (sizeof(*sc)/2) - 1;
9073 checksum = 0;
9074 scarray = (uint16_t *)sc;
9075
9076 for (i = 0; i < maxaddr; i++)
9077 checksum = checksum + scarray[i];
9078 if (checksum == 0
9079 || (checksum & 0xFFFF) != sc->checksum) {
9080 return (0);
9081 } else {
9082 return (1);
9083 }
9084 }
9085
9086 int
ahd_acquire_seeprom(struct ahd_softc * ahd)9087 ahd_acquire_seeprom(struct ahd_softc *ahd)
9088 {
9089 /*
9090 * We should be able to determine the SEEPROM type
9091 * from the flexport logic, but unfortunately not
9092 * all implementations have this logic and there is
9093 * no programmatic method for determining if the logic
9094 * is present.
9095 */
9096
9097 return (1);
9098 #if 0
9099 uint8_t seetype;
9100 int error;
9101
9102 error = ahd_read_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, &seetype);
9103 if (error != 0
9104 || ((seetype & FLX_ROMSTAT_SEECFG) == FLX_ROMSTAT_SEE_NONE))
9105 return (0);
9106 return (1);
9107 #endif
9108 }
9109
9110 void
ahd_release_seeprom(struct ahd_softc * ahd)9111 ahd_release_seeprom(struct ahd_softc *ahd)
9112 {
9113 /* Currently a no-op */
9114 }
9115
9116 int
ahd_write_flexport(struct ahd_softc * ahd,u_int addr,u_int value)9117 ahd_write_flexport(struct ahd_softc *ahd, u_int addr, u_int value)
9118 {
9119 int error;
9120
9121 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
9122 if (addr > 7)
9123 panic("ahd_write_flexport: address out of range");
9124 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3));
9125 error = ahd_wait_flexport(ahd);
9126 if (error != 0)
9127 return (error);
9128 ahd_outb(ahd, BRDDAT, value);
9129 ahd_flush_device_writes(ahd);
9130 ahd_outb(ahd, BRDCTL, BRDSTB|BRDEN|(addr << 3));
9131 ahd_flush_device_writes(ahd);
9132 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3));
9133 ahd_flush_device_writes(ahd);
9134 ahd_outb(ahd, BRDCTL, 0);
9135 ahd_flush_device_writes(ahd);
9136 return (0);
9137 }
9138
9139 int
ahd_read_flexport(struct ahd_softc * ahd,u_int addr,uint8_t * value)9140 ahd_read_flexport(struct ahd_softc *ahd, u_int addr, uint8_t *value)
9141 {
9142 int error;
9143
9144 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
9145 if (addr > 7)
9146 panic("ahd_read_flexport: address out of range");
9147 ahd_outb(ahd, BRDCTL, BRDRW|BRDEN|(addr << 3));
9148 error = ahd_wait_flexport(ahd);
9149 if (error != 0)
9150 return (error);
9151 *value = ahd_inb(ahd, BRDDAT);
9152 ahd_outb(ahd, BRDCTL, 0);
9153 ahd_flush_device_writes(ahd);
9154 return (0);
9155 }
9156
9157 /*
9158 * Wait at most 2 seconds for flexport arbitration to succeed.
9159 */
9160 int
ahd_wait_flexport(struct ahd_softc * ahd)9161 ahd_wait_flexport(struct ahd_softc *ahd)
9162 {
9163 int cnt;
9164
9165 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
9166 cnt = 1000000 * 2 / 5;
9167 while ((ahd_inb(ahd, BRDCTL) & FLXARBACK) == 0 && --cnt)
9168 ahd_delay(5);
9169
9170 if (cnt == 0)
9171 return (ETIMEDOUT);
9172 return (0);
9173 }
9174
9175 /************************* Target Mode ****************************************/
9176 #ifdef AHD_TARGET_MODE
9177 cam_status
ahd_find_tmode_devs(struct ahd_softc * ahd,struct cam_sim * sim,union ccb * ccb,struct ahd_tmode_tstate ** tstate,struct ahd_tmode_lstate ** lstate,int notfound_failure)9178 ahd_find_tmode_devs(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb,
9179 struct ahd_tmode_tstate **tstate,
9180 struct ahd_tmode_lstate **lstate,
9181 int notfound_failure)
9182 {
9183
9184 if ((ahd->features & AHD_TARGETMODE) == 0)
9185 return (CAM_REQ_INVALID);
9186
9187 /*
9188 * Handle the 'black hole' device that sucks up
9189 * requests to unattached luns on enabled targets.
9190 */
9191 if (ccb->ccb_h.target_id == CAM_TARGET_WILDCARD
9192 && ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) {
9193 *tstate = NULL;
9194 *lstate = ahd->black_hole;
9195 } else {
9196 u_int max_id;
9197
9198 max_id = (ahd->features & AHD_WIDE) ? 15 : 7;
9199 if (ccb->ccb_h.target_id > max_id)
9200 return (CAM_TID_INVALID);
9201
9202 if (ccb->ccb_h.target_lun >= AHD_NUM_LUNS)
9203 return (CAM_LUN_INVALID);
9204
9205 *tstate = ahd->enabled_targets[ccb->ccb_h.target_id];
9206 *lstate = NULL;
9207 if (*tstate != NULL)
9208 *lstate =
9209 (*tstate)->enabled_luns[ccb->ccb_h.target_lun];
9210 }
9211
9212 if (notfound_failure != 0 && *lstate == NULL)
9213 return (CAM_PATH_INVALID);
9214
9215 return (CAM_REQ_CMP);
9216 }
9217
9218 void
ahd_handle_en_lun(struct ahd_softc * ahd,struct cam_sim * sim,union ccb * ccb)9219 ahd_handle_en_lun(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb)
9220 {
9221 #if NOT_YET
9222 struct ahd_tmode_tstate *tstate;
9223 struct ahd_tmode_lstate *lstate;
9224 struct ccb_en_lun *cel;
9225 cam_status status;
9226 u_int target;
9227 u_int lun;
9228 u_int target_mask;
9229 u_long s;
9230 char channel;
9231
9232 status = ahd_find_tmode_devs(ahd, sim, ccb, &tstate, &lstate,
9233 /*notfound_failure*/FALSE);
9234
9235 if (status != CAM_REQ_CMP) {
9236 ccb->ccb_h.status = status;
9237 return;
9238 }
9239
9240 if ((ahd->features & AHD_MULTIROLE) != 0) {
9241 u_int our_id;
9242
9243 our_id = ahd->our_id;
9244 if (ccb->ccb_h.target_id != our_id) {
9245 if ((ahd->features & AHD_MULTI_TID) != 0
9246 && (ahd->flags & AHD_INITIATORROLE) != 0) {
9247 /*
9248 * Only allow additional targets if
9249 * the initiator role is disabled.
9250 * The hardware cannot handle a re-select-in
9251 * on the initiator id during a re-select-out
9252 * on a different target id.
9253 */
9254 status = CAM_TID_INVALID;
9255 } else if ((ahd->flags & AHD_INITIATORROLE) != 0
9256 || ahd->enabled_luns > 0) {
9257 /*
9258 * Only allow our target id to change
9259 * if the initiator role is not configured
9260 * and there are no enabled luns which
9261 * are attached to the currently registered
9262 * scsi id.
9263 */
9264 status = CAM_TID_INVALID;
9265 }
9266 }
9267 }
9268
9269 if (status != CAM_REQ_CMP) {
9270 ccb->ccb_h.status = status;
9271 return;
9272 }
9273
9274 /*
9275 * We now have an id that is valid.
9276 * If we aren't in target mode, switch modes.
9277 */
9278 if ((ahd->flags & AHD_TARGETROLE) == 0
9279 && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) {
9280 u_long s;
9281
9282 printf("Configuring Target Mode\n");
9283 ahd_lock(ahd, &s);
9284 if (LIST_FIRST(&ahd->pending_scbs) != NULL) {
9285 ccb->ccb_h.status = CAM_BUSY;
9286 ahd_unlock(ahd, &s);
9287 return;
9288 }
9289 ahd->flags |= AHD_TARGETROLE;
9290 if ((ahd->features & AHD_MULTIROLE) == 0)
9291 ahd->flags &= ~AHD_INITIATORROLE;
9292 ahd_pause(ahd);
9293 ahd_loadseq(ahd);
9294 ahd_restart(ahd);
9295 ahd_unlock(ahd, &s);
9296 }
9297 cel = &ccb->cel;
9298 target = ccb->ccb_h.target_id;
9299 lun = ccb->ccb_h.target_lun;
9300 channel = SIM_CHANNEL(ahd, sim);
9301 target_mask = 0x01 << target;
9302 if (channel == 'B')
9303 target_mask <<= 8;
9304
9305 if (cel->enable != 0) {
9306 u_int scsiseq1;
9307
9308 /* Are we already enabled?? */
9309 if (lstate != NULL) {
9310 xpt_print_path(ccb->ccb_h.path);
9311 printf("Lun already enabled\n");
9312 ccb->ccb_h.status = CAM_LUN_ALRDY_ENA;
9313 return;
9314 }
9315
9316 if (cel->grp6_len != 0
9317 || cel->grp7_len != 0) {
9318 /*
9319 * Don't (yet?) support vendor
9320 * specific commands.
9321 */
9322 ccb->ccb_h.status = CAM_REQ_INVALID;
9323 printf("Non-zero Group Codes\n");
9324 return;
9325 }
9326
9327 /*
9328 * Seems to be okay.
9329 * Setup our data structures.
9330 */
9331 if (target != CAM_TARGET_WILDCARD && tstate == NULL) {
9332 tstate = ahd_alloc_tstate(ahd, target, channel);
9333 if (tstate == NULL) {
9334 xpt_print_path(ccb->ccb_h.path);
9335 printf("Couldn't allocate tstate\n");
9336 ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
9337 return;
9338 }
9339 }
9340 lstate = malloc(sizeof(*lstate), M_DEVBUF, M_NOWAIT);
9341 if (lstate == NULL) {
9342 xpt_print_path(ccb->ccb_h.path);
9343 printf("Couldn't allocate lstate\n");
9344 ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
9345 return;
9346 }
9347 memset(lstate, 0, sizeof(*lstate));
9348 status = xpt_create_path(&lstate->path, /*periph*/NULL,
9349 xpt_path_path_id(ccb->ccb_h.path),
9350 xpt_path_target_id(ccb->ccb_h.path),
9351 xpt_path_lun_id(ccb->ccb_h.path));
9352 if (status != CAM_REQ_CMP) {
9353 free(lstate, M_DEVBUF);
9354 xpt_print_path(ccb->ccb_h.path);
9355 printf("Couldn't allocate path\n");
9356 ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
9357 return;
9358 }
9359 SLIST_INIT(&lstate->accept_tios);
9360 SLIST_INIT(&lstate->immed_notifies);
9361 ahd_lock(ahd, &s);
9362 ahd_pause(ahd);
9363 if (target != CAM_TARGET_WILDCARD) {
9364 tstate->enabled_luns[lun] = lstate;
9365 ahd->enabled_luns++;
9366
9367 if ((ahd->features & AHD_MULTI_TID) != 0) {
9368 u_int targid_mask;
9369
9370 targid_mask = ahd_inb(ahd, TARGID)
9371 | (ahd_inb(ahd, TARGID + 1) << 8);
9372
9373 targid_mask |= target_mask;
9374 ahd_outb(ahd, TARGID, targid_mask);
9375 ahd_outb(ahd, TARGID+1, (targid_mask >> 8));
9376
9377 ahd_update_scsiid(ahd, targid_mask);
9378 } else {
9379 u_int our_id;
9380 char channel;
9381
9382 channel = SIM_CHANNEL(ahd, sim);
9383 our_id = SIM_SCSI_ID(ahd, sim);
9384
9385 /*
9386 * This can only happen if selections
9387 * are not enabled
9388 */
9389 if (target != our_id) {
9390 u_int sblkctl;
9391 char cur_channel;
9392 int swap;
9393
9394 sblkctl = ahd_inb(ahd, SBLKCTL);
9395 cur_channel = (sblkctl & SELBUSB)
9396 ? 'B' : 'A';
9397 if ((ahd->features & AHD_TWIN) == 0)
9398 cur_channel = 'A';
9399 swap = cur_channel != channel;
9400 ahd->our_id = target;
9401
9402 if (swap)
9403 ahd_outb(ahd, SBLKCTL,
9404 sblkctl ^ SELBUSB);
9405
9406 ahd_outb(ahd, SCSIID, target);
9407
9408 if (swap)
9409 ahd_outb(ahd, SBLKCTL, sblkctl);
9410 }
9411 }
9412 } else
9413 ahd->black_hole = lstate;
9414 /* Allow select-in operations */
9415 if (ahd->black_hole != NULL && ahd->enabled_luns > 0) {
9416 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE);
9417 scsiseq1 |= ENSELI;
9418 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1);
9419 scsiseq1 = ahd_inb(ahd, SCSISEQ1);
9420 scsiseq1 |= ENSELI;
9421 ahd_outb(ahd, SCSISEQ1, scsiseq1);
9422 }
9423 ahd_unpause(ahd);
9424 ahd_unlock(ahd, &s);
9425 ccb->ccb_h.status = CAM_REQ_CMP;
9426 xpt_print_path(ccb->ccb_h.path);
9427 printf("Lun now enabled for target mode\n");
9428 } else {
9429 struct scb *scb;
9430 int i, empty;
9431
9432 if (lstate == NULL) {
9433 ccb->ccb_h.status = CAM_LUN_INVALID;
9434 return;
9435 }
9436
9437 ahd_lock(ahd, &s);
9438
9439 ccb->ccb_h.status = CAM_REQ_CMP;
9440 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
9441 struct ccb_hdr *ccbh;
9442
9443 ccbh = &scb->io_ctx->ccb_h;
9444 if (ccbh->func_code == XPT_CONT_TARGET_IO
9445 && !xpt_path_comp(ccbh->path, ccb->ccb_h.path)){
9446 printf("CTIO pending\n");
9447 ccb->ccb_h.status = CAM_REQ_INVALID;
9448 ahd_unlock(ahd, &s);
9449 return;
9450 }
9451 }
9452
9453 if (SLIST_FIRST(&lstate->accept_tios) != NULL) {
9454 printf("ATIOs pending\n");
9455 ccb->ccb_h.status = CAM_REQ_INVALID;
9456 }
9457
9458 if (SLIST_FIRST(&lstate->immed_notifies) != NULL) {
9459 printf("INOTs pending\n");
9460 ccb->ccb_h.status = CAM_REQ_INVALID;
9461 }
9462
9463 if (ccb->ccb_h.status != CAM_REQ_CMP) {
9464 ahd_unlock(ahd, &s);
9465 return;
9466 }
9467
9468 xpt_print_path(ccb->ccb_h.path);
9469 printf("Target mode disabled\n");
9470 xpt_free_path(lstate->path);
9471 free(lstate, M_DEVBUF);
9472
9473 ahd_pause(ahd);
9474 /* Can we clean up the target too? */
9475 if (target != CAM_TARGET_WILDCARD) {
9476 tstate->enabled_luns[lun] = NULL;
9477 ahd->enabled_luns--;
9478 for (empty = 1, i = 0; i < 8; i++)
9479 if (tstate->enabled_luns[i] != NULL) {
9480 empty = 0;
9481 break;
9482 }
9483
9484 if (empty) {
9485 ahd_free_tstate(ahd, target, channel,
9486 /*force*/FALSE);
9487 if (ahd->features & AHD_MULTI_TID) {
9488 u_int targid_mask;
9489
9490 targid_mask = ahd_inb(ahd, TARGID)
9491 | (ahd_inb(ahd, TARGID + 1)
9492 << 8);
9493
9494 targid_mask &= ~target_mask;
9495 ahd_outb(ahd, TARGID, targid_mask);
9496 ahd_outb(ahd, TARGID+1,
9497 (targid_mask >> 8));
9498 ahd_update_scsiid(ahd, targid_mask);
9499 }
9500 }
9501 } else {
9502
9503 ahd->black_hole = NULL;
9504
9505 /*
9506 * We can't allow selections without
9507 * our black hole device.
9508 */
9509 empty = TRUE;
9510 }
9511 if (ahd->enabled_luns == 0) {
9512 /* Disallow select-in */
9513 u_int scsiseq1;
9514
9515 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE);
9516 scsiseq1 &= ~ENSELI;
9517 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1);
9518 scsiseq1 = ahd_inb(ahd, SCSISEQ1);
9519 scsiseq1 &= ~ENSELI;
9520 ahd_outb(ahd, SCSISEQ1, scsiseq1);
9521
9522 if ((ahd->features & AHD_MULTIROLE) == 0) {
9523 printf("Configuring Initiator Mode\n");
9524 ahd->flags &= ~AHD_TARGETROLE;
9525 ahd->flags |= AHD_INITIATORROLE;
9526 ahd_pause(ahd);
9527 ahd_loadseq(ahd);
9528 ahd_restart(ahd);
9529 /*
9530 * Unpaused. The extra unpause
9531 * that follows is harmless.
9532 */
9533 }
9534 }
9535 ahd_unpause(ahd);
9536 ahd_unlock(ahd, &s);
9537 }
9538 #endif
9539 }
9540
9541 static void
ahd_update_scsiid(struct ahd_softc * ahd,u_int targid_mask)9542 ahd_update_scsiid(struct ahd_softc *ahd, u_int targid_mask)
9543 {
9544 #if NOT_YET
9545 u_int scsiid_mask;
9546 u_int scsiid;
9547
9548 if ((ahd->features & AHD_MULTI_TID) == 0)
9549 panic("ahd_update_scsiid called on non-multitid unit\n");
9550
9551 /*
9552 * Since we will rely on the TARGID mask
9553 * for selection enables, ensure that OID
9554 * in SCSIID is not set to some other ID
9555 * that we don't want to allow selections on.
9556 */
9557 if ((ahd->features & AHD_ULTRA2) != 0)
9558 scsiid = ahd_inb(ahd, SCSIID_ULTRA2);
9559 else
9560 scsiid = ahd_inb(ahd, SCSIID);
9561 scsiid_mask = 0x1 << (scsiid & OID);
9562 if ((targid_mask & scsiid_mask) == 0) {
9563 u_int our_id;
9564
9565 /* ffs counts from 1 */
9566 our_id = ffs(targid_mask);
9567 if (our_id == 0)
9568 our_id = ahd->our_id;
9569 else
9570 our_id--;
9571 scsiid &= TID;
9572 scsiid |= our_id;
9573 }
9574 if ((ahd->features & AHD_ULTRA2) != 0)
9575 ahd_outb(ahd, SCSIID_ULTRA2, scsiid);
9576 else
9577 ahd_outb(ahd, SCSIID, scsiid);
9578 #endif
9579 }
9580
9581 #ifdef AHD_TARGET_MODE
9582 void
ahd_run_tqinfifo(struct ahd_softc * ahd,int paused)9583 ahd_run_tqinfifo(struct ahd_softc *ahd, int paused)
9584 {
9585 struct target_cmd *cmd;
9586
9587 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_POSTREAD);
9588 while ((cmd = &ahd->targetcmds[ahd->tqinfifonext])->cmd_valid != 0) {
9589
9590 /*
9591 * Only advance through the queue if we
9592 * have the resources to process the command.
9593 */
9594 if (ahd_handle_target_cmd(ahd, cmd) != 0)
9595 break;
9596
9597 cmd->cmd_valid = 0;
9598 ahd_dmamap_sync(ahd, ahd->parent_dmat /*shared_data_dmat*/,
9599 ahd->shared_data_map.dmamap,
9600 ahd_targetcmd_offset(ahd, ahd->tqinfifonext),
9601 sizeof(struct target_cmd),
9602 BUS_DMASYNC_PREREAD);
9603 ahd->tqinfifonext++;
9604
9605 /*
9606 * Lazily update our position in the target mode incoming
9607 * command queue as seen by the sequencer.
9608 */
9609 if ((ahd->tqinfifonext & (HOST_TQINPOS - 1)) == 1) {
9610 u_int hs_mailbox;
9611
9612 hs_mailbox = ahd_inb(ahd, HS_MAILBOX);
9613 hs_mailbox &= ~HOST_TQINPOS;
9614 hs_mailbox |= ahd->tqinfifonext & HOST_TQINPOS;
9615 ahd_outb(ahd, HS_MAILBOX, hs_mailbox);
9616 }
9617 }
9618 }
9619 #endif
9620
9621 static int
ahd_handle_target_cmd(struct ahd_softc * ahd,struct target_cmd * cmd)9622 ahd_handle_target_cmd(struct ahd_softc *ahd, struct target_cmd *cmd)
9623 {
9624 struct ahd_tmode_tstate *tstate;
9625 struct ahd_tmode_lstate *lstate;
9626 struct ccb_accept_tio *atio;
9627 uint8_t *byte;
9628 int initiator;
9629 int target;
9630 int lun;
9631
9632 initiator = SCSIID_TARGET(ahd, cmd->scsiid);
9633 target = SCSIID_OUR_ID(cmd->scsiid);
9634 lun = (cmd->identify & MSG_IDENTIFY_LUNMASK);
9635
9636 byte = cmd->bytes;
9637 tstate = ahd->enabled_targets[target];
9638 lstate = NULL;
9639 if (tstate != NULL)
9640 lstate = tstate->enabled_luns[lun];
9641
9642 /*
9643 * Commands for disabled luns go to the black hole driver.
9644 */
9645 if (lstate == NULL)
9646 lstate = ahd->black_hole;
9647
9648 atio = (struct ccb_accept_tio*)SLIST_FIRST(&lstate->accept_tios);
9649 if (atio == NULL) {
9650 ahd->flags |= AHD_TQINFIFO_BLOCKED;
9651 /*
9652 * Wait for more ATIOs from the peripheral driver for this lun.
9653 */
9654 return (1);
9655 } else
9656 ahd->flags &= ~AHD_TQINFIFO_BLOCKED;
9657 #ifdef AHD_DEBUG
9658 if ((ahd_debug & AHD_SHOW_TQIN) != 0)
9659 printf("%s: incoming command from %d for %d:%d%s\n",
9660 ahd_name(ahd),
9661 initiator, target, lun,
9662 lstate == ahd->black_hole ? "(Black Holed)" : "");
9663 #endif
9664 SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle);
9665
9666 if (lstate == ahd->black_hole) {
9667 /* Fill in the wildcards */
9668 atio->ccb_h.target_id = target;
9669 atio->ccb_h.target_lun = lun;
9670 }
9671
9672 /*
9673 * Package it up and send it off to
9674 * whomever has this lun enabled.
9675 */
9676 atio->sense_len = 0;
9677 atio->init_id = initiator;
9678 if (byte[0] != 0xFF) {
9679 /* Tag was included */
9680 atio->tag_action = *byte++;
9681 atio->tag_id = *byte++;
9682 atio->ccb_h.flags = CAM_TAG_ACTION_VALID;
9683 } else {
9684 atio->ccb_h.flags = 0;
9685 }
9686 byte++;
9687
9688 /* Okay. Now determine the cdb size based on the command code */
9689 switch (*byte >> CMD_GROUP_CODE_SHIFT) {
9690 case 0:
9691 atio->cdb_len = 6;
9692 break;
9693 case 1:
9694 case 2:
9695 atio->cdb_len = 10;
9696 break;
9697 case 4:
9698 atio->cdb_len = 16;
9699 break;
9700 case 5:
9701 atio->cdb_len = 12;
9702 break;
9703 case 3:
9704 default:
9705 /* Only copy the opcode. */
9706 atio->cdb_len = 1;
9707 printf("Reserved or VU command code type encountered\n");
9708 break;
9709 }
9710
9711 memcpy(atio->cdb_io.cdb_bytes, byte, atio->cdb_len);
9712
9713 atio->ccb_h.status |= CAM_CDB_RECVD;
9714
9715 if ((cmd->identify & MSG_IDENTIFY_DISCFLAG) == 0) {
9716 /*
9717 * We weren't allowed to disconnect.
9718 * We're hanging on the bus until a
9719 * continue target I/O comes in response
9720 * to this accept tio.
9721 */
9722 #ifdef AHD_DEBUG
9723 if ((ahd_debug & AHD_SHOW_TQIN) != 0)
9724 printf("Received Immediate Command %d:%d:%d - %p\n",
9725 initiator, target, lun, ahd->pending_device);
9726 #endif
9727 ahd->pending_device = lstate;
9728 ahd_freeze_ccb((union ccb *)atio);
9729 atio->ccb_h.flags |= CAM_DIS_DISCONNECT;
9730 }
9731 xpt_done((union ccb*)atio);
9732 return (0);
9733 }
9734
9735 #endif
9736
9737 static int
ahd_createdmamem(bus_dma_tag_t tag,int size,int flags,bus_dmamap_t * mapp,void ** vaddr,bus_addr_t * baddr,bus_dma_segment_t * seg,int * nseg,const char * myname,const char * what)9738 ahd_createdmamem(bus_dma_tag_t tag, int size, int flags, bus_dmamap_t *mapp,
9739 void **vaddr, bus_addr_t *baddr, bus_dma_segment_t *seg, int *nseg,
9740 const char *myname, const char *what)
9741 {
9742 int error, level = 0;
9743
9744 if ((error = bus_dmamem_alloc(tag, size, PAGE_SIZE, 0,
9745 seg, 1, nseg, BUS_DMA_WAITOK)) != 0) {
9746 printf("%s: failed to allocate DMA mem for %s, error = %d\n",
9747 myname, what, error);
9748 goto out;
9749 }
9750 level++;
9751
9752 if ((error = bus_dmamem_map(tag, seg, *nseg, size, vaddr,
9753 BUS_DMA_WAITOK|BUS_DMA_COHERENT)) != 0) {
9754 printf("%s: failed to map DMA mem for %s, error = %d\n",
9755 myname, what, error);
9756 goto out;
9757 }
9758 level++;
9759
9760 if ((error = bus_dmamap_create(tag, size, 1, size, 0,
9761 BUS_DMA_WAITOK | flags, mapp)) != 0) {
9762 printf("%s: failed to create DMA map for %s, error = %d\n",
9763 myname, what, error);
9764 goto out;
9765 }
9766 level++;
9767
9768
9769 if ((error = bus_dmamap_load(tag, *mapp, *vaddr, size, NULL,
9770 BUS_DMA_WAITOK)) != 0) {
9771 printf("%s: failed to load DMA map for %s, error = %d\n",
9772 myname, what, error);
9773 goto out;
9774 }
9775
9776 *baddr = (*mapp)->dm_segs[0].ds_addr;
9777
9778 return 0;
9779 out:
9780 printf("ahd_createdmamem error (%d)\n", level);
9781 switch (level) {
9782 case 3:
9783 bus_dmamap_destroy(tag, *mapp);
9784 /* FALLTHROUGH */
9785 case 2:
9786 bus_dmamem_unmap(tag, *vaddr, size);
9787 /* FALLTHROUGH */
9788 case 1:
9789 bus_dmamem_free(tag, seg, *nseg);
9790 break;
9791 default:
9792 break;
9793 }
9794
9795 return error;
9796 }
9797
9798 static void
ahd_freedmamem(bus_dma_tag_t tag,int size,bus_dmamap_t map,void * vaddr,bus_dma_segment_t * seg,int nseg)9799 ahd_freedmamem(bus_dma_tag_t tag, int size, bus_dmamap_t map, void *vaddr,
9800 bus_dma_segment_t *seg, int nseg)
9801 {
9802
9803 bus_dmamap_unload(tag, map);
9804 bus_dmamap_destroy(tag, map);
9805 bus_dmamem_unmap(tag, vaddr, size);
9806 bus_dmamem_free(tag, seg, nseg);
9807 }
9808