1 /*-
2  * Copyright (c) 2003-2007 Tim Kientzle
3  * Copyright (c) 2012 Michihiro NAKAJIMA
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
16  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18  * IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT,
19  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25  */
26 
27 #include "archive_platform.h"
28 
29 #ifdef HAVE_ERRNO_H
30 #include <errno.h>
31 #endif
32 #include <stdio.h>
33 #ifdef HAVE_STDLIB_H
34 #include <stdlib.h>
35 #endif
36 #ifdef HAVE_STRING_H
37 #include <string.h>
38 #endif
39 #ifdef HAVE_BZLIB_H
40 #include <bzlib.h>
41 #endif
42 
43 #include "archive.h"
44 #include "archive_private.h"
45 #include "archive_write_private.h"
46 
47 #if ARCHIVE_VERSION_NUMBER < 4000000
48 int
archive_write_set_compression_bzip2(struct archive * a)49 archive_write_set_compression_bzip2(struct archive *a)
50 {
51 	__archive_write_filters_free(a);
52 	return (archive_write_add_filter_bzip2(a));
53 }
54 #endif
55 
56 struct private_data {
57 	int		 compression_level;
58 #if defined(HAVE_BZLIB_H) && defined(BZ_CONFIG_ERROR)
59 	bz_stream	 stream;
60 	int64_t		 total_in;
61 	char		*compressed;
62 	size_t		 compressed_buffer_size;
63 #else
64 	struct archive_write_program_data *pdata;
65 #endif
66 };
67 
68 static int archive_compressor_bzip2_close(struct archive_write_filter *);
69 static int archive_compressor_bzip2_free(struct archive_write_filter *);
70 static int archive_compressor_bzip2_open(struct archive_write_filter *);
71 static int archive_compressor_bzip2_options(struct archive_write_filter *,
72 		    const char *, const char *);
73 static int archive_compressor_bzip2_write(struct archive_write_filter *,
74 		    const void *, size_t);
75 
76 /*
77  * Add a bzip2 compression filter to this write handle.
78  */
79 int
archive_write_add_filter_bzip2(struct archive * _a)80 archive_write_add_filter_bzip2(struct archive *_a)
81 {
82 	struct archive_write *a = (struct archive_write *)_a;
83 	struct archive_write_filter *f = __archive_write_allocate_filter(_a);
84 	struct private_data *data;
85 
86 	archive_check_magic(&a->archive, ARCHIVE_WRITE_MAGIC,
87 	    ARCHIVE_STATE_NEW, "archive_write_add_filter_bzip2");
88 
89 	data = calloc(1, sizeof(*data));
90 	if (data == NULL) {
91 		archive_set_error(&a->archive, ENOMEM, "Out of memory");
92 		return (ARCHIVE_FATAL);
93 	}
94 	data->compression_level = 9; /* default */
95 
96 	f->data = data;
97 	f->options = &archive_compressor_bzip2_options;
98 	f->close = &archive_compressor_bzip2_close;
99 	f->free = &archive_compressor_bzip2_free;
100 	f->open = &archive_compressor_bzip2_open;
101 	f->code = ARCHIVE_FILTER_BZIP2;
102 	f->name = "bzip2";
103 #if defined(HAVE_BZLIB_H) && defined(BZ_CONFIG_ERROR)
104 	return (ARCHIVE_OK);
105 #else
106 	data->pdata = __archive_write_program_allocate("bzip2");
107 	if (data->pdata == NULL) {
108 		free(data);
109 		archive_set_error(&a->archive, ENOMEM, "Out of memory");
110 		return (ARCHIVE_FATAL);
111 	}
112 	data->compression_level = 0;
113 	archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC,
114 	    "Using external bzip2 program");
115 	return (ARCHIVE_WARN);
116 #endif
117 }
118 
119 /*
120  * Set write options.
121  */
122 static int
archive_compressor_bzip2_options(struct archive_write_filter * f,const char * key,const char * value)123 archive_compressor_bzip2_options(struct archive_write_filter *f,
124     const char *key, const char *value)
125 {
126 	struct private_data *data = (struct private_data *)f->data;
127 
128 	if (strcmp(key, "compression-level") == 0) {
129 		if (value == NULL || !(value[0] >= '0' && value[0] <= '9') ||
130 		    value[1] != '\0')
131 			return (ARCHIVE_WARN);
132 		data->compression_level = value[0] - '0';
133 		/* Make '0' be a synonym for '1'. */
134 		/* This way, bzip2 compressor supports the same 0..9
135 		 * range of levels as gzip. */
136 		if (data->compression_level < 1)
137 			data->compression_level = 1;
138 		return (ARCHIVE_OK);
139 	}
140 
141 	/* Note: The "warn" return is just to inform the options
142 	 * supervisor that we didn't handle it.  It will generate
143 	 * a suitable error if no one used this option. */
144 	return (ARCHIVE_WARN);
145 }
146 
147 #if defined(HAVE_BZLIB_H) && defined(BZ_CONFIG_ERROR)
148 /* Don't compile this if we don't have bzlib. */
149 
150 /*
151  * Yuck.  bzlib.h is not const-correct, so I need this one bit
152  * of ugly hackery to convert a const * pointer to a non-const pointer.
153  */
154 #define	SET_NEXT_IN(st,src)					\
155 	(st)->stream.next_in = (char *)(uintptr_t)(const void *)(src)
156 static int drive_compressor(struct archive_write_filter *,
157 		    struct private_data *, int finishing);
158 
159 /*
160  * Setup callback.
161  */
162 static int
archive_compressor_bzip2_open(struct archive_write_filter * f)163 archive_compressor_bzip2_open(struct archive_write_filter *f)
164 {
165 	struct private_data *data = (struct private_data *)f->data;
166 	int ret;
167 
168 	if (data->compressed == NULL) {
169 		size_t bs = 65536, bpb;
170 		if (f->archive->magic == ARCHIVE_WRITE_MAGIC) {
171 			/* Buffer size should be a multiple number of the of bytes
172 			 * per block for performance. */
173 			bpb = archive_write_get_bytes_per_block(f->archive);
174 			if (bpb > bs)
175 				bs = bpb;
176 			else if (bpb != 0)
177 				bs -= bs % bpb;
178 		}
179 		data->compressed_buffer_size = bs;
180 		data->compressed
181 		    = (char *)malloc(data->compressed_buffer_size);
182 		if (data->compressed == NULL) {
183 			archive_set_error(f->archive, ENOMEM,
184 			    "Can't allocate data for compression buffer");
185 			return (ARCHIVE_FATAL);
186 		}
187 	}
188 
189 	memset(&data->stream, 0, sizeof(data->stream));
190 	data->stream.next_out = data->compressed;
191 	data->stream.avail_out = (uint32_t)data->compressed_buffer_size;
192 	f->write = archive_compressor_bzip2_write;
193 
194 	/* Initialize compression library */
195 	ret = BZ2_bzCompressInit(&(data->stream),
196 	    data->compression_level, 0, 30);
197 	if (ret == BZ_OK) {
198 		f->data = data;
199 		return (ARCHIVE_OK);
200 	}
201 
202 	/* Library setup failed: clean up. */
203 	archive_set_error(f->archive, ARCHIVE_ERRNO_MISC,
204 	    "Internal error initializing compression library");
205 
206 	/* Override the error message if we know what really went wrong. */
207 	switch (ret) {
208 	case BZ_PARAM_ERROR:
209 		archive_set_error(f->archive, ARCHIVE_ERRNO_MISC,
210 		    "Internal error initializing compression library: "
211 		    "invalid setup parameter");
212 		break;
213 	case BZ_MEM_ERROR:
214 		archive_set_error(f->archive, ENOMEM,
215 		    "Internal error initializing compression library: "
216 		    "out of memory");
217 		break;
218 	case BZ_CONFIG_ERROR:
219 		archive_set_error(f->archive, ARCHIVE_ERRNO_MISC,
220 		    "Internal error initializing compression library: "
221 		    "mis-compiled library");
222 		break;
223 	}
224 
225 	return (ARCHIVE_FATAL);
226 
227 }
228 
229 /*
230  * Write data to the compressed stream.
231  *
232  * Returns ARCHIVE_OK if all data written, error otherwise.
233  */
234 static int
archive_compressor_bzip2_write(struct archive_write_filter * f,const void * buff,size_t length)235 archive_compressor_bzip2_write(struct archive_write_filter *f,
236     const void *buff, size_t length)
237 {
238 	struct private_data *data = (struct private_data *)f->data;
239 
240 	/* Update statistics */
241 	data->total_in += length;
242 
243 	/* Compress input data to output buffer */
244 	SET_NEXT_IN(data, buff);
245 	data->stream.avail_in = (uint32_t)length;
246 	if (drive_compressor(f, data, 0))
247 		return (ARCHIVE_FATAL);
248 	return (ARCHIVE_OK);
249 }
250 
251 
252 /*
253  * Finish the compression.
254  */
255 static int
archive_compressor_bzip2_close(struct archive_write_filter * f)256 archive_compressor_bzip2_close(struct archive_write_filter *f)
257 {
258 	struct private_data *data = (struct private_data *)f->data;
259 	int ret;
260 
261 	/* Finish compression cycle. */
262 	ret = drive_compressor(f, data, 1);
263 	if (ret == ARCHIVE_OK) {
264 		/* Write the last block */
265 		ret = __archive_write_filter(f->next_filter,
266 		    data->compressed,
267 		    data->compressed_buffer_size - data->stream.avail_out);
268 	}
269 
270 	switch (BZ2_bzCompressEnd(&(data->stream))) {
271 	case BZ_OK:
272 		break;
273 	default:
274 		archive_set_error(f->archive, ARCHIVE_ERRNO_PROGRAMMER,
275 		    "Failed to clean up compressor");
276 		ret = ARCHIVE_FATAL;
277 	}
278 	return ret;
279 }
280 
281 static int
archive_compressor_bzip2_free(struct archive_write_filter * f)282 archive_compressor_bzip2_free(struct archive_write_filter *f)
283 {
284 	struct private_data *data = (struct private_data *)f->data;
285 	free(data->compressed);
286 	free(data);
287 	f->data = NULL;
288 	return (ARCHIVE_OK);
289 }
290 
291 /*
292  * Utility function to push input data through compressor, writing
293  * full output blocks as necessary.
294  *
295  * Note that this handles both the regular write case (finishing ==
296  * false) and the end-of-archive case (finishing == true).
297  */
298 static int
drive_compressor(struct archive_write_filter * f,struct private_data * data,int finishing)299 drive_compressor(struct archive_write_filter *f,
300     struct private_data *data, int finishing)
301 {
302 	int ret;
303 
304 	for (;;) {
305 		if (data->stream.avail_out == 0) {
306 			ret = __archive_write_filter(f->next_filter,
307 			    data->compressed,
308 			    data->compressed_buffer_size);
309 			if (ret != ARCHIVE_OK) {
310 				/* TODO: Handle this write failure */
311 				return (ARCHIVE_FATAL);
312 			}
313 			data->stream.next_out = data->compressed;
314 			data->stream.avail_out = (uint32_t)data->compressed_buffer_size;
315 		}
316 
317 		/* If there's nothing to do, we're done. */
318 		if (!finishing && data->stream.avail_in == 0)
319 			return (ARCHIVE_OK);
320 
321 		ret = BZ2_bzCompress(&(data->stream),
322 		    finishing ? BZ_FINISH : BZ_RUN);
323 
324 		switch (ret) {
325 		case BZ_RUN_OK:
326 			/* In non-finishing case, did compressor
327 			 * consume everything? */
328 			if (!finishing && data->stream.avail_in == 0)
329 				return (ARCHIVE_OK);
330 			break;
331 		case BZ_FINISH_OK:  /* Finishing: There's more work to do */
332 			break;
333 		case BZ_STREAM_END: /* Finishing: all done */
334 			/* Only occurs in finishing case */
335 			return (ARCHIVE_OK);
336 		default:
337 			/* Any other return value indicates an error */
338 			archive_set_error(f->archive,
339 			    ARCHIVE_ERRNO_PROGRAMMER,
340 			    "Bzip2 compression failed;"
341 			    " BZ2_bzCompress() returned %d",
342 			    ret);
343 			return (ARCHIVE_FATAL);
344 		}
345 	}
346 }
347 
348 #else /* HAVE_BZLIB_H && BZ_CONFIG_ERROR */
349 
350 static int
archive_compressor_bzip2_open(struct archive_write_filter * f)351 archive_compressor_bzip2_open(struct archive_write_filter *f)
352 {
353 	struct private_data *data = (struct private_data *)f->data;
354 	struct archive_string as;
355 	int r;
356 
357 	archive_string_init(&as);
358 	archive_strcpy(&as, "bzip2");
359 
360 	/* Specify compression level. */
361 	if (data->compression_level > 0) {
362 		archive_strcat(&as, " -");
363 		archive_strappend_char(&as, '0' + data->compression_level);
364 	}
365 	f->write = archive_compressor_bzip2_write;
366 
367 	r = __archive_write_program_open(f, data->pdata, as.s);
368 	archive_string_free(&as);
369 	return (r);
370 }
371 
372 static int
archive_compressor_bzip2_write(struct archive_write_filter * f,const void * buff,size_t length)373 archive_compressor_bzip2_write(struct archive_write_filter *f, const void *buff,
374     size_t length)
375 {
376 	struct private_data *data = (struct private_data *)f->data;
377 
378 	return __archive_write_program_write(f, data->pdata, buff, length);
379 }
380 
381 static int
archive_compressor_bzip2_close(struct archive_write_filter * f)382 archive_compressor_bzip2_close(struct archive_write_filter *f)
383 {
384 	struct private_data *data = (struct private_data *)f->data;
385 
386 	return __archive_write_program_close(f, data->pdata);
387 }
388 
389 static int
archive_compressor_bzip2_free(struct archive_write_filter * f)390 archive_compressor_bzip2_free(struct archive_write_filter *f)
391 {
392 	struct private_data *data = (struct private_data *)f->data;
393 
394 	__archive_write_program_free(data->pdata);
395 	free(data);
396 	return (ARCHIVE_OK);
397 }
398 
399 #endif /* HAVE_BZLIB_H && BZ_CONFIG_ERROR */
400