1 /* $NetBSD: smc83c170.c,v 1.96 2022/09/25 18:43:32 thorpej Exp $ */
2
3 /*-
4 * Copyright (c) 1998, 1999 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
9 * NASA Ames Research Center.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30 * POSSIBILITY OF SUCH DAMAGE.
31 */
32
33 /*
34 * Device driver for the Standard Microsystems Corp. 83C170
35 * Ethernet PCI Integrated Controller (EPIC/100).
36 */
37
38 #include <sys/cdefs.h>
39 __KERNEL_RCSID(0, "$NetBSD: smc83c170.c,v 1.96 2022/09/25 18:43:32 thorpej Exp $");
40
41
42 #include <sys/param.h>
43 #include <sys/systm.h>
44 #include <sys/callout.h>
45 #include <sys/mbuf.h>
46 #include <sys/kernel.h>
47 #include <sys/socket.h>
48 #include <sys/ioctl.h>
49 #include <sys/errno.h>
50 #include <sys/device.h>
51
52 #include <net/if.h>
53 #include <net/if_dl.h>
54 #include <net/if_media.h>
55 #include <net/if_ether.h>
56
57 #include <net/bpf.h>
58
59 #include <sys/bus.h>
60 #include <sys/intr.h>
61
62 #include <dev/mii/miivar.h>
63 #include <dev/mii/lxtphyreg.h>
64
65 #include <dev/ic/smc83c170reg.h>
66 #include <dev/ic/smc83c170var.h>
67
68 static void epic_start(struct ifnet *);
69 static void epic_watchdog(struct ifnet *);
70 static int epic_ioctl(struct ifnet *, u_long, void *);
71 static int epic_init(struct ifnet *);
72 static void epic_stop(struct ifnet *, int);
73
74 static bool epic_shutdown(device_t, int);
75
76 static void epic_reset(struct epic_softc *);
77 static void epic_rxdrain(struct epic_softc *);
78 static int epic_add_rxbuf(struct epic_softc *, int);
79 static void epic_read_eeprom(struct epic_softc *, int, int, uint16_t *);
80 static void epic_set_mchash(struct epic_softc *);
81 static void epic_fixup_clock_source(struct epic_softc *);
82 static int epic_mii_read(device_t, int, int, uint16_t *);
83 static int epic_mii_write(device_t, int, int, uint16_t);
84 static int epic_mii_wait(struct epic_softc *, uint32_t);
85 static void epic_tick(void *);
86
87 static void epic_statchg(struct ifnet *);
88 static int epic_mediachange(struct ifnet *);
89
90 #define INTMASK (INTSTAT_FATAL_INT | INTSTAT_TXU | \
91 INTSTAT_TXC | INTSTAT_RXE | INTSTAT_RQE | INTSTAT_RCC)
92
93 int epic_copy_small = 0;
94
95 #define ETHER_PAD_LEN (ETHER_MIN_LEN - ETHER_CRC_LEN)
96
97 /*
98 * Attach an EPIC interface to the system.
99 */
100 void
epic_attach(struct epic_softc * sc)101 epic_attach(struct epic_softc *sc)
102 {
103 bus_space_tag_t st = sc->sc_st;
104 bus_space_handle_t sh = sc->sc_sh;
105 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
106 struct mii_data * const mii = &sc->sc_mii;
107 int rseg, error, miiflags;
108 u_int i;
109 bus_dma_segment_t seg;
110 uint8_t enaddr[ETHER_ADDR_LEN], devname[12 + 1];
111 uint16_t myea[ETHER_ADDR_LEN / 2], mydevname[6];
112 char *nullbuf;
113
114 callout_init(&sc->sc_mii_callout, 0);
115 callout_setfunc(&sc->sc_mii_callout, epic_tick, sc);
116
117 /*
118 * Allocate the control data structures, and create and load the
119 * DMA map for it.
120 */
121 if ((error = bus_dmamem_alloc(sc->sc_dmat,
122 sizeof(struct epic_control_data) + ETHER_PAD_LEN, PAGE_SIZE, 0,
123 &seg, 1, &rseg, BUS_DMA_NOWAIT)) != 0) {
124 aprint_error_dev(sc->sc_dev,
125 "unable to allocate control data, error = %d\n", error);
126 goto fail_0;
127 }
128
129 if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg,
130 sizeof(struct epic_control_data) + ETHER_PAD_LEN,
131 (void **)&sc->sc_control_data,
132 BUS_DMA_NOWAIT | BUS_DMA_COHERENT)) != 0) {
133 aprint_error_dev(sc->sc_dev,
134 "unable to map control data, error = %d\n", error);
135 goto fail_1;
136 }
137 nullbuf =
138 (char *)sc->sc_control_data + sizeof(struct epic_control_data);
139 memset(nullbuf, 0, ETHER_PAD_LEN);
140
141 if ((error = bus_dmamap_create(sc->sc_dmat,
142 sizeof(struct epic_control_data), 1,
143 sizeof(struct epic_control_data), 0, BUS_DMA_NOWAIT,
144 &sc->sc_cddmamap)) != 0) {
145 aprint_error_dev(sc->sc_dev,
146 "unable to create control data DMA map, error = %d\n",
147 error);
148 goto fail_2;
149 }
150
151 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap,
152 sc->sc_control_data, sizeof(struct epic_control_data), NULL,
153 BUS_DMA_NOWAIT)) != 0) {
154 aprint_error_dev(sc->sc_dev,
155 "unable to load control data DMA map, error = %d\n",
156 error);
157 goto fail_3;
158 }
159
160 /*
161 * Create the transmit buffer DMA maps.
162 */
163 for (i = 0; i < EPIC_NTXDESC; i++) {
164 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES,
165 EPIC_NFRAGS, MCLBYTES, 0, BUS_DMA_NOWAIT,
166 &EPIC_DSTX(sc, i)->ds_dmamap)) != 0) {
167 aprint_error_dev(sc->sc_dev,
168 "unable to create tx DMA map %d, error = %d\n",
169 i, error);
170 goto fail_4;
171 }
172 }
173
174 /*
175 * Create the receive buffer DMA maps.
176 */
177 for (i = 0; i < EPIC_NRXDESC; i++) {
178 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1,
179 MCLBYTES, 0, BUS_DMA_NOWAIT,
180 &EPIC_DSRX(sc, i)->ds_dmamap)) != 0) {
181 aprint_error_dev(sc->sc_dev,
182 "unable to create rx DMA map %d, error = %d\n",
183 i, error);
184 goto fail_5;
185 }
186 EPIC_DSRX(sc, i)->ds_mbuf = NULL;
187 }
188
189 /*
190 * create and map the pad buffer
191 */
192 if ((error = bus_dmamap_create(sc->sc_dmat, ETHER_PAD_LEN, 1,
193 ETHER_PAD_LEN, 0, BUS_DMA_NOWAIT,&sc->sc_nulldmamap)) != 0) {
194 aprint_error_dev(sc->sc_dev,
195 "unable to create pad buffer DMA map, error = %d\n", error);
196 goto fail_5;
197 }
198
199 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_nulldmamap,
200 nullbuf, ETHER_PAD_LEN, NULL, BUS_DMA_NOWAIT)) != 0) {
201 aprint_error_dev(sc->sc_dev,
202 "unable to load pad buffer DMA map, error = %d\n", error);
203 goto fail_6;
204 }
205 bus_dmamap_sync(sc->sc_dmat, sc->sc_nulldmamap, 0, ETHER_PAD_LEN,
206 BUS_DMASYNC_PREWRITE);
207
208 /*
209 * Bring the chip out of low-power mode and reset it to a known state.
210 */
211 bus_space_write_4(st, sh, EPIC_GENCTL, 0);
212 epic_reset(sc);
213
214 /*
215 * Read the Ethernet address from the EEPROM.
216 */
217 epic_read_eeprom(sc, 0, __arraycount(myea), myea);
218 for (i = 0; i < __arraycount(myea); i++) {
219 enaddr[i * 2] = myea[i] & 0xff;
220 enaddr[i * 2 + 1] = myea[i] >> 8;
221 }
222
223 /*
224 * ...and the device name.
225 */
226 epic_read_eeprom(sc, 0x2c, __arraycount(mydevname), mydevname);
227 for (i = 0; i < __arraycount(mydevname); i++) {
228 devname[i * 2] = mydevname[i] & 0xff;
229 devname[i * 2 + 1] = mydevname[i] >> 8;
230 }
231
232 devname[sizeof(mydevname)] = '\0';
233 for (i = sizeof(mydevname) ; i > 0; i--) {
234 if (devname[i - 1] == ' ')
235 devname[i - 1] = '\0';
236 else
237 break;
238 }
239
240 aprint_normal_dev(sc->sc_dev, "%s, Ethernet address %s\n",
241 devname, ether_sprintf(enaddr));
242
243 miiflags = 0;
244 if (sc->sc_hwflags & EPIC_HAS_MII_FIBER)
245 miiflags |= MIIF_HAVEFIBER;
246
247 /*
248 * Initialize our media structures and probe the MII.
249 */
250 mii->mii_ifp = ifp;
251 mii->mii_readreg = epic_mii_read;
252 mii->mii_writereg = epic_mii_write;
253 mii->mii_statchg = epic_statchg;
254
255 sc->sc_ethercom.ec_mii = mii;
256 ifmedia_init(&mii->mii_media, IFM_IMASK, epic_mediachange,
257 ether_mediastatus);
258 mii_attach(sc->sc_dev, mii, 0xffffffff, MII_PHY_ANY,
259 MII_OFFSET_ANY, miiflags);
260 if (LIST_EMPTY(&mii->mii_phys)) {
261 ifmedia_add(&mii->mii_media, IFM_ETHER | IFM_NONE, 0, NULL);
262 ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_NONE);
263 } else
264 ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_AUTO);
265
266 if (sc->sc_hwflags & EPIC_HAS_BNC) {
267 /* use the next free media instance */
268 sc->sc_serinst = mii->mii_instance++;
269 ifmedia_add(&mii->mii_media,
270 IFM_MAKEWORD(IFM_ETHER, IFM_10_2, 0, sc->sc_serinst),
271 0, NULL);
272 aprint_normal_dev(sc->sc_dev, "10base2/BNC\n");
273 } else
274 sc->sc_serinst = -1;
275
276 strlcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ);
277 ifp->if_softc = sc;
278 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
279 ifp->if_ioctl = epic_ioctl;
280 ifp->if_start = epic_start;
281 ifp->if_watchdog = epic_watchdog;
282 ifp->if_init = epic_init;
283 ifp->if_stop = epic_stop;
284 IFQ_SET_READY(&ifp->if_snd);
285
286 /*
287 * We can support 802.1Q VLAN-sized frames.
288 */
289 sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU;
290
291 /*
292 * Attach the interface.
293 */
294 if_attach(ifp);
295 if_deferred_start_init(ifp, NULL);
296 ether_ifattach(ifp, enaddr);
297
298 /*
299 * Make sure the interface is shutdown during reboot.
300 */
301 if (pmf_device_register1(sc->sc_dev, NULL, NULL, epic_shutdown))
302 pmf_class_network_register(sc->sc_dev, ifp);
303 else
304 aprint_error_dev(sc->sc_dev,
305 "couldn't establish power handler\n");
306
307 return;
308
309 /*
310 * Free any resources we've allocated during the failed attach
311 * attempt. Do this in reverse order and fall through.
312 */
313 fail_6:
314 bus_dmamap_destroy(sc->sc_dmat, sc->sc_nulldmamap);
315 fail_5:
316 for (i = 0; i < EPIC_NRXDESC; i++) {
317 if (EPIC_DSRX(sc, i)->ds_dmamap != NULL)
318 bus_dmamap_destroy(sc->sc_dmat,
319 EPIC_DSRX(sc, i)->ds_dmamap);
320 }
321 fail_4:
322 for (i = 0; i < EPIC_NTXDESC; i++) {
323 if (EPIC_DSTX(sc, i)->ds_dmamap != NULL)
324 bus_dmamap_destroy(sc->sc_dmat,
325 EPIC_DSTX(sc, i)->ds_dmamap);
326 }
327 bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap);
328 fail_3:
329 bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap);
330 fail_2:
331 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_control_data,
332 sizeof(struct epic_control_data));
333 fail_1:
334 bus_dmamem_free(sc->sc_dmat, &seg, rseg);
335 fail_0:
336 return;
337 }
338
339 /*
340 * Shutdown hook. Make sure the interface is stopped at reboot.
341 */
342 static bool
epic_shutdown(device_t self,int howto)343 epic_shutdown(device_t self, int howto)
344 {
345 struct epic_softc *sc = device_private(self);
346
347 epic_stop(&sc->sc_ethercom.ec_if, 1);
348
349 return true;
350 }
351
352 /*
353 * Start packet transmission on the interface.
354 * [ifnet interface function]
355 */
356 static void
epic_start(struct ifnet * ifp)357 epic_start(struct ifnet *ifp)
358 {
359 struct epic_softc *sc = ifp->if_softc;
360 struct mbuf *m0, *m;
361 struct epic_txdesc *txd;
362 struct epic_descsoft *ds;
363 struct epic_fraglist *fr;
364 bus_dmamap_t dmamap;
365 int error, firsttx, nexttx, opending, seg;
366 u_int len;
367
368 /*
369 * Remember the previous txpending and the first transmit
370 * descriptor we use.
371 */
372 opending = sc->sc_txpending;
373 firsttx = EPIC_NEXTTX(sc->sc_txlast);
374
375 /*
376 * Loop through the send queue, setting up transmit descriptors
377 * until we drain the queue, or use up all available transmit
378 * descriptors.
379 */
380 while (sc->sc_txpending < EPIC_NTXDESC) {
381 /*
382 * Grab a packet off the queue.
383 */
384 IFQ_POLL(&ifp->if_snd, m0);
385 if (m0 == NULL)
386 break;
387 m = NULL;
388
389 /*
390 * Get the last and next available transmit descriptor.
391 */
392 nexttx = EPIC_NEXTTX(sc->sc_txlast);
393 txd = EPIC_CDTX(sc, nexttx);
394 fr = EPIC_CDFL(sc, nexttx);
395 ds = EPIC_DSTX(sc, nexttx);
396 dmamap = ds->ds_dmamap;
397
398 /*
399 * Load the DMA map. If this fails, the packet either
400 * didn't fit in the alloted number of frags, or we were
401 * short on resources. In this case, we'll copy and try
402 * again.
403 */
404 if ((error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0,
405 BUS_DMA_WRITE | BUS_DMA_NOWAIT)) != 0 ||
406 (m0->m_pkthdr.len < ETHER_PAD_LEN &&
407 dmamap-> dm_nsegs == EPIC_NFRAGS)) {
408 if (error == 0)
409 bus_dmamap_unload(sc->sc_dmat, dmamap);
410
411 MGETHDR(m, M_DONTWAIT, MT_DATA);
412 if (m == NULL) {
413 printf("%s: unable to allocate Tx mbuf\n",
414 device_xname(sc->sc_dev));
415 break;
416 }
417 MCLAIM(m, &sc->sc_ethercom.ec_tx_mowner);
418 if (m0->m_pkthdr.len > MHLEN) {
419 MCLGET(m, M_DONTWAIT);
420 if ((m->m_flags & M_EXT) == 0) {
421 printf("%s: unable to allocate Tx "
422 "cluster\n",
423 device_xname(sc->sc_dev));
424 m_freem(m);
425 break;
426 }
427 }
428 m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, void *));
429 m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len;
430 error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap,
431 m, BUS_DMA_WRITE | BUS_DMA_NOWAIT);
432 if (error) {
433 printf("%s: unable to load Tx buffer, "
434 "error = %d\n", device_xname(sc->sc_dev),
435 error);
436 break;
437 }
438 }
439 IFQ_DEQUEUE(&ifp->if_snd, m0);
440 if (m != NULL) {
441 m_freem(m0);
442 m0 = m;
443 }
444
445 /* Initialize the fraglist. */
446 for (seg = 0; seg < dmamap->dm_nsegs; seg++) {
447 fr->ef_frags[seg].ef_addr =
448 dmamap->dm_segs[seg].ds_addr;
449 fr->ef_frags[seg].ef_length =
450 dmamap->dm_segs[seg].ds_len;
451 }
452 len = m0->m_pkthdr.len;
453 if (len < ETHER_PAD_LEN) {
454 fr->ef_frags[seg].ef_addr = sc->sc_nulldma;
455 fr->ef_frags[seg].ef_length = ETHER_PAD_LEN - len;
456 len = ETHER_PAD_LEN;
457 seg++;
458 }
459 fr->ef_nfrags = seg;
460
461 EPIC_CDFLSYNC(sc, nexttx, BUS_DMASYNC_PREWRITE);
462
463 /* Sync the DMA map. */
464 bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize,
465 BUS_DMASYNC_PREWRITE);
466
467 /*
468 * Store a pointer to the packet so we can free it later.
469 */
470 ds->ds_mbuf = m0;
471
472 /*
473 * Fill in the transmit descriptor.
474 */
475 txd->et_control = ET_TXCTL_LASTDESC | ET_TXCTL_FRAGLIST;
476
477 /*
478 * If this is the first descriptor we're enqueueing,
479 * don't give it to the EPIC yet. That could cause
480 * a race condition. We'll do it below.
481 */
482 if (nexttx == firsttx)
483 txd->et_txstatus = TXSTAT_TXLENGTH(len);
484 else
485 txd->et_txstatus =
486 TXSTAT_TXLENGTH(len) | ET_TXSTAT_OWNER;
487
488 EPIC_CDTXSYNC(sc, nexttx,
489 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
490
491 /* Advance the tx pointer. */
492 sc->sc_txpending++;
493 sc->sc_txlast = nexttx;
494
495 /*
496 * Pass the packet to any BPF listeners.
497 */
498 bpf_mtap(ifp, m0, BPF_D_OUT);
499 }
500
501 if (sc->sc_txpending != opending) {
502 /*
503 * We enqueued packets. If the transmitter was idle,
504 * reset the txdirty pointer.
505 */
506 if (opending == 0)
507 sc->sc_txdirty = firsttx;
508
509 /*
510 * Cause a transmit interrupt to happen on the
511 * last packet we enqueued.
512 */
513 EPIC_CDTX(sc, sc->sc_txlast)->et_control |= ET_TXCTL_IAF;
514 EPIC_CDTXSYNC(sc, sc->sc_txlast,
515 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
516
517 /*
518 * The entire packet chain is set up. Give the
519 * first descriptor to the EPIC now.
520 */
521 EPIC_CDTX(sc, firsttx)->et_txstatus |= ET_TXSTAT_OWNER;
522 EPIC_CDTXSYNC(sc, firsttx,
523 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
524
525 /* Start the transmitter. */
526 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_COMMAND,
527 COMMAND_TXQUEUED);
528
529 /* Set a watchdog timer in case the chip flakes out. */
530 ifp->if_timer = 5;
531 }
532 }
533
534 /*
535 * Watchdog timer handler.
536 * [ifnet interface function]
537 */
538 static void
epic_watchdog(struct ifnet * ifp)539 epic_watchdog(struct ifnet *ifp)
540 {
541 struct epic_softc *sc = ifp->if_softc;
542
543 printf("%s: device timeout\n", device_xname(sc->sc_dev));
544 if_statinc(ifp, if_oerrors);
545
546 (void)epic_init(ifp);
547 }
548
549 /*
550 * Handle control requests from the operator.
551 * [ifnet interface function]
552 */
553 static int
epic_ioctl(struct ifnet * ifp,u_long cmd,void * data)554 epic_ioctl(struct ifnet *ifp, u_long cmd, void *data)
555 {
556 struct epic_softc *sc = ifp->if_softc;
557 int s, error;
558
559 s = splnet();
560
561 error = ether_ioctl(ifp, cmd, data);
562 if (error == ENETRESET) {
563 /*
564 * Multicast list has changed; set the hardware filter
565 * accordingly. Update our idea of the current media;
566 * epic_set_mchash() needs to know what it is.
567 */
568 if (ifp->if_flags & IFF_RUNNING) {
569 mii_pollstat(&sc->sc_mii);
570 epic_set_mchash(sc);
571 }
572 error = 0;
573 }
574
575 splx(s);
576 return error;
577 }
578
579 /*
580 * Interrupt handler.
581 */
582 int
epic_intr(void * arg)583 epic_intr(void *arg)
584 {
585 struct epic_softc *sc = arg;
586 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
587 struct epic_rxdesc *rxd;
588 struct epic_txdesc *txd;
589 struct epic_descsoft *ds;
590 struct mbuf *m;
591 uint32_t intstat, rxstatus, txstatus;
592 int i, claimed = 0;
593 u_int len;
594
595 top:
596 /*
597 * Get the interrupt status from the EPIC.
598 */
599 intstat = bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_INTSTAT);
600 if ((intstat & INTSTAT_INT_ACTV) == 0)
601 return claimed;
602
603 claimed = 1;
604
605 /*
606 * Acknowledge the interrupt.
607 */
608 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_INTSTAT,
609 intstat & INTMASK);
610
611 /*
612 * Check for receive interrupts.
613 */
614 if (intstat & (INTSTAT_RCC | INTSTAT_RXE | INTSTAT_RQE)) {
615 for (i = sc->sc_rxptr;; i = EPIC_NEXTRX(i)) {
616 rxd = EPIC_CDRX(sc, i);
617 ds = EPIC_DSRX(sc, i);
618
619 EPIC_CDRXSYNC(sc, i,
620 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
621
622 rxstatus = rxd->er_rxstatus;
623 if (rxstatus & ER_RXSTAT_OWNER) {
624 /*
625 * We have processed all of the
626 * receive buffers.
627 */
628 break;
629 }
630
631 /*
632 * Make sure the packet arrived intact. If an error
633 * occurred, update stats and reset the descriptor.
634 * The buffer will be reused the next time the
635 * descriptor comes up in the ring.
636 */
637 if ((rxstatus & ER_RXSTAT_PKTINTACT) == 0) {
638 if (rxstatus & ER_RXSTAT_CRCERROR)
639 printf("%s: CRC error\n",
640 device_xname(sc->sc_dev));
641 if (rxstatus & ER_RXSTAT_ALIGNERROR)
642 printf("%s: alignment error\n",
643 device_xname(sc->sc_dev));
644 if_statinc(ifp, if_ierrors);
645 EPIC_INIT_RXDESC(sc, i);
646 continue;
647 }
648
649 bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0,
650 ds->ds_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD);
651
652 /*
653 * The EPIC includes the CRC with every packet;
654 * trim it.
655 */
656 len = RXSTAT_RXLENGTH(rxstatus) - ETHER_CRC_LEN;
657
658 if (len < sizeof(struct ether_header)) {
659 /*
660 * Runt packet; drop it now.
661 */
662 if_statinc(ifp, if_ierrors);
663 EPIC_INIT_RXDESC(sc, i);
664 bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0,
665 ds->ds_dmamap->dm_mapsize,
666 BUS_DMASYNC_PREREAD);
667 continue;
668 }
669
670 /*
671 * If the packet is small enough to fit in a
672 * single header mbuf, allocate one and copy
673 * the data into it. This greatly reduces
674 * memory consumption when we receive lots
675 * of small packets.
676 *
677 * Otherwise, we add a new buffer to the receive
678 * chain. If this fails, we drop the packet and
679 * recycle the old buffer.
680 */
681 if (epic_copy_small != 0 && len <= MHLEN) {
682 MGETHDR(m, M_DONTWAIT, MT_DATA);
683 if (m == NULL)
684 goto dropit;
685 MCLAIM(m, &sc->sc_ethercom.ec_rx_mowner);
686 memcpy(mtod(m, void *),
687 mtod(ds->ds_mbuf, void *), len);
688 EPIC_INIT_RXDESC(sc, i);
689 bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0,
690 ds->ds_dmamap->dm_mapsize,
691 BUS_DMASYNC_PREREAD);
692 } else {
693 m = ds->ds_mbuf;
694 if (epic_add_rxbuf(sc, i) != 0) {
695 dropit:
696 if_statinc(ifp, if_ierrors);
697 EPIC_INIT_RXDESC(sc, i);
698 bus_dmamap_sync(sc->sc_dmat,
699 ds->ds_dmamap, 0,
700 ds->ds_dmamap->dm_mapsize,
701 BUS_DMASYNC_PREREAD);
702 continue;
703 }
704 }
705
706 m_set_rcvif(m, ifp);
707 m->m_pkthdr.len = m->m_len = len;
708
709 /* Pass it on. */
710 if_percpuq_enqueue(ifp->if_percpuq, m);
711 }
712
713 /* Update the receive pointer. */
714 sc->sc_rxptr = i;
715
716 /*
717 * Check for receive queue underflow.
718 */
719 if (intstat & INTSTAT_RQE) {
720 printf("%s: receiver queue empty\n",
721 device_xname(sc->sc_dev));
722 /*
723 * Ring is already built; just restart the
724 * receiver.
725 */
726 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_PRCDAR,
727 EPIC_CDRXADDR(sc, sc->sc_rxptr));
728 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_COMMAND,
729 COMMAND_RXQUEUED | COMMAND_START_RX);
730 }
731 }
732
733 /*
734 * Check for transmission complete interrupts.
735 */
736 if (intstat & (INTSTAT_TXC | INTSTAT_TXU)) {
737 for (i = sc->sc_txdirty; sc->sc_txpending != 0;
738 i = EPIC_NEXTTX(i), sc->sc_txpending--) {
739 txd = EPIC_CDTX(sc, i);
740 ds = EPIC_DSTX(sc, i);
741
742 EPIC_CDTXSYNC(sc, i,
743 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
744
745 txstatus = txd->et_txstatus;
746 if (txstatus & ET_TXSTAT_OWNER)
747 break;
748
749 EPIC_CDFLSYNC(sc, i, BUS_DMASYNC_POSTWRITE);
750
751 bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap,
752 0, ds->ds_dmamap->dm_mapsize,
753 BUS_DMASYNC_POSTWRITE);
754 bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap);
755 m_freem(ds->ds_mbuf);
756 ds->ds_mbuf = NULL;
757
758 /*
759 * Check for errors and collisions.
760 */
761 net_stat_ref_t nsr = IF_STAT_GETREF(ifp);
762 if ((txstatus & ET_TXSTAT_PACKETTX) == 0)
763 if_statinc_ref(nsr, if_oerrors);
764 else
765 if_statinc_ref(nsr, if_opackets);
766 if (TXSTAT_COLLISIONS(txstatus))
767 if_statadd_ref(nsr, if_collisions,
768 TXSTAT_COLLISIONS(txstatus));
769 if (txstatus & ET_TXSTAT_CARSENSELOST)
770 printf("%s: lost carrier\n",
771 device_xname(sc->sc_dev));
772 IF_STAT_PUTREF(ifp);
773 }
774
775 /* Update the dirty transmit buffer pointer. */
776 sc->sc_txdirty = i;
777
778 /*
779 * Cancel the watchdog timer if there are no pending
780 * transmissions.
781 */
782 if (sc->sc_txpending == 0)
783 ifp->if_timer = 0;
784
785 /*
786 * Kick the transmitter after a DMA underrun.
787 */
788 if (intstat & INTSTAT_TXU) {
789 printf("%s: transmit underrun\n",
790 device_xname(sc->sc_dev));
791 bus_space_write_4(sc->sc_st, sc->sc_sh,
792 EPIC_COMMAND, COMMAND_TXUGO);
793 if (sc->sc_txpending)
794 bus_space_write_4(sc->sc_st, sc->sc_sh,
795 EPIC_COMMAND, COMMAND_TXQUEUED);
796 }
797
798 /*
799 * Try to get more packets going.
800 */
801 if_schedule_deferred_start(ifp);
802 }
803
804 /*
805 * Check for fatal interrupts.
806 */
807 if (intstat & INTSTAT_FATAL_INT) {
808 if (intstat & INTSTAT_PTA)
809 printf("%s: PCI target abort error\n",
810 device_xname(sc->sc_dev));
811 else if (intstat & INTSTAT_PMA)
812 printf("%s: PCI master abort error\n",
813 device_xname(sc->sc_dev));
814 else if (intstat & INTSTAT_APE)
815 printf("%s: PCI address parity error\n",
816 device_xname(sc->sc_dev));
817 else if (intstat & INTSTAT_DPE)
818 printf("%s: PCI data parity error\n",
819 device_xname(sc->sc_dev));
820 else
821 printf("%s: unknown fatal error\n",
822 device_xname(sc->sc_dev));
823 (void)epic_init(ifp);
824 }
825
826 /*
827 * Check for more interrupts.
828 */
829 goto top;
830 }
831
832 /*
833 * One second timer, used to tick the MII.
834 */
835 static void
epic_tick(void * arg)836 epic_tick(void *arg)
837 {
838 struct epic_softc *sc = arg;
839 int s;
840
841 s = splnet();
842 mii_tick(&sc->sc_mii);
843 splx(s);
844
845 callout_schedule(&sc->sc_mii_callout, hz);
846 }
847
848 /*
849 * Fixup the clock source on the EPIC.
850 */
851 static void
epic_fixup_clock_source(struct epic_softc * sc)852 epic_fixup_clock_source(struct epic_softc *sc)
853 {
854 int i;
855
856 /*
857 * According to SMC Application Note 7-15, the EPIC's clock
858 * source is incorrect following a reset. This manifests itself
859 * as failure to recognize when host software has written to
860 * a register on the EPIC. The appnote recommends issuing at
861 * least 16 consecutive writes to the CLOCK TEST bit to correctly
862 * configure the clock source.
863 */
864 for (i = 0; i < 16; i++)
865 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_TEST,
866 TEST_CLOCKTEST);
867 }
868
869 /*
870 * Perform a soft reset on the EPIC.
871 */
872 static void
epic_reset(struct epic_softc * sc)873 epic_reset(struct epic_softc *sc)
874 {
875
876 epic_fixup_clock_source(sc);
877
878 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_GENCTL, 0);
879 delay(100);
880 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_GENCTL, GENCTL_SOFTRESET);
881 delay(100);
882
883 epic_fixup_clock_source(sc);
884 }
885
886 /*
887 * Initialize the interface. Must be called at splnet().
888 */
889 static int
epic_init(struct ifnet * ifp)890 epic_init(struct ifnet *ifp)
891 {
892 struct epic_softc *sc = ifp->if_softc;
893 bus_space_tag_t st = sc->sc_st;
894 bus_space_handle_t sh = sc->sc_sh;
895 const uint8_t *enaddr = CLLADDR(ifp->if_sadl);
896 struct epic_txdesc *txd;
897 struct epic_descsoft *ds;
898 uint32_t genctl, reg0;
899 int i, error = 0;
900
901 /*
902 * Cancel any pending I/O.
903 */
904 epic_stop(ifp, 0);
905
906 /*
907 * Reset the EPIC to a known state.
908 */
909 epic_reset(sc);
910
911 /*
912 * Magical mystery initialization.
913 */
914 bus_space_write_4(st, sh, EPIC_TXTEST, 0);
915
916 /*
917 * Initialize the EPIC genctl register:
918 *
919 * - 64 byte receive FIFO threshold
920 * - automatic advance to next receive frame
921 */
922 genctl = GENCTL_RX_FIFO_THRESH0 | GENCTL_ONECOPY;
923 #if BYTE_ORDER == BIG_ENDIAN
924 genctl |= GENCTL_BIG_ENDIAN;
925 #endif
926 bus_space_write_4(st, sh, EPIC_GENCTL, genctl);
927
928 /*
929 * Reset the MII bus and PHY.
930 */
931 reg0 = bus_space_read_4(st, sh, EPIC_NVCTL);
932 bus_space_write_4(st, sh, EPIC_NVCTL, reg0 | NVCTL_GPIO1 | NVCTL_GPOE1);
933 bus_space_write_4(st, sh, EPIC_MIICFG, MIICFG_ENASER);
934 bus_space_write_4(st, sh, EPIC_GENCTL, genctl | GENCTL_RESET_PHY);
935 delay(100);
936 bus_space_write_4(st, sh, EPIC_GENCTL, genctl);
937 delay(1000);
938 bus_space_write_4(st, sh, EPIC_NVCTL, reg0);
939
940 /*
941 * Initialize Ethernet address.
942 */
943 reg0 = enaddr[1] << 8 | enaddr[0];
944 bus_space_write_4(st, sh, EPIC_LAN0, reg0);
945 reg0 = enaddr[3] << 8 | enaddr[2];
946 bus_space_write_4(st, sh, EPIC_LAN1, reg0);
947 reg0 = enaddr[5] << 8 | enaddr[4];
948 bus_space_write_4(st, sh, EPIC_LAN2, reg0);
949
950 /*
951 * Initialize receive control. Remember the external buffer
952 * size setting.
953 */
954 reg0 = bus_space_read_4(st, sh, EPIC_RXCON) &
955 (RXCON_EXTBUFSIZESEL1 | RXCON_EXTBUFSIZESEL0);
956 reg0 |= (RXCON_RXMULTICAST | RXCON_RXBROADCAST);
957 if (ifp->if_flags & IFF_PROMISC)
958 reg0 |= RXCON_PROMISCMODE;
959 bus_space_write_4(st, sh, EPIC_RXCON, reg0);
960
961 /* Set the current media. */
962 if ((error = epic_mediachange(ifp)) != 0)
963 goto out;
964
965 /* Set up the multicast hash table. */
966 epic_set_mchash(sc);
967
968 /*
969 * Initialize the transmit descriptor ring. txlast is initialized
970 * to the end of the list so that it will wrap around to the first
971 * descriptor when the first packet is transmitted.
972 */
973 for (i = 0; i < EPIC_NTXDESC; i++) {
974 txd = EPIC_CDTX(sc, i);
975 memset(txd, 0, sizeof(struct epic_txdesc));
976 txd->et_bufaddr = EPIC_CDFLADDR(sc, i);
977 txd->et_nextdesc = EPIC_CDTXADDR(sc, EPIC_NEXTTX(i));
978 EPIC_CDTXSYNC(sc, i,
979 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
980 }
981 sc->sc_txpending = 0;
982 sc->sc_txdirty = 0;
983 sc->sc_txlast = EPIC_NTXDESC - 1;
984
985 /*
986 * Initialize the receive descriptor ring.
987 */
988 for (i = 0; i < EPIC_NRXDESC; i++) {
989 ds = EPIC_DSRX(sc, i);
990 if (ds->ds_mbuf == NULL) {
991 if ((error = epic_add_rxbuf(sc, i)) != 0) {
992 printf("%s: unable to allocate or map rx "
993 "buffer %d error = %d\n",
994 device_xname(sc->sc_dev), i, error);
995 /*
996 * XXX Should attempt to run with fewer receive
997 * XXX buffers instead of just failing.
998 */
999 epic_rxdrain(sc);
1000 goto out;
1001 }
1002 } else
1003 EPIC_INIT_RXDESC(sc, i);
1004 }
1005 sc->sc_rxptr = 0;
1006
1007 /*
1008 * Initialize the interrupt mask and enable interrupts.
1009 */
1010 bus_space_write_4(st, sh, EPIC_INTMASK, INTMASK);
1011 bus_space_write_4(st, sh, EPIC_GENCTL, genctl | GENCTL_INTENA);
1012
1013 /*
1014 * Give the transmit and receive rings to the EPIC.
1015 */
1016 bus_space_write_4(st, sh, EPIC_PTCDAR,
1017 EPIC_CDTXADDR(sc, EPIC_NEXTTX(sc->sc_txlast)));
1018 bus_space_write_4(st, sh, EPIC_PRCDAR,
1019 EPIC_CDRXADDR(sc, sc->sc_rxptr));
1020
1021 /*
1022 * Set the EPIC in motion.
1023 */
1024 bus_space_write_4(st, sh, EPIC_COMMAND,
1025 COMMAND_RXQUEUED | COMMAND_START_RX);
1026
1027 /*
1028 * ...all done!
1029 */
1030 ifp->if_flags |= IFF_RUNNING;
1031
1032 /*
1033 * Start the one second clock.
1034 */
1035 callout_schedule(&sc->sc_mii_callout, hz);
1036
1037 /*
1038 * Attempt to start output on the interface.
1039 */
1040 epic_start(ifp);
1041
1042 out:
1043 if (error)
1044 printf("%s: interface not running\n", device_xname(sc->sc_dev));
1045 return error;
1046 }
1047
1048 /*
1049 * Drain the receive queue.
1050 */
1051 static void
epic_rxdrain(struct epic_softc * sc)1052 epic_rxdrain(struct epic_softc *sc)
1053 {
1054 struct epic_descsoft *ds;
1055 int i;
1056
1057 for (i = 0; i < EPIC_NRXDESC; i++) {
1058 ds = EPIC_DSRX(sc, i);
1059 if (ds->ds_mbuf != NULL) {
1060 bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap);
1061 m_freem(ds->ds_mbuf);
1062 ds->ds_mbuf = NULL;
1063 }
1064 }
1065 }
1066
1067 /*
1068 * Stop transmission on the interface.
1069 */
1070 static void
epic_stop(struct ifnet * ifp,int disable)1071 epic_stop(struct ifnet *ifp, int disable)
1072 {
1073 struct epic_softc *sc = ifp->if_softc;
1074 bus_space_tag_t st = sc->sc_st;
1075 bus_space_handle_t sh = sc->sc_sh;
1076 struct epic_descsoft *ds;
1077 uint32_t reg;
1078 int i;
1079
1080 /*
1081 * Stop the one second clock.
1082 */
1083 callout_stop(&sc->sc_mii_callout);
1084
1085 /* Down the MII. */
1086 mii_down(&sc->sc_mii);
1087
1088 /* Paranoia... */
1089 epic_fixup_clock_source(sc);
1090
1091 /*
1092 * Disable interrupts.
1093 */
1094 reg = bus_space_read_4(st, sh, EPIC_GENCTL);
1095 bus_space_write_4(st, sh, EPIC_GENCTL, reg & ~GENCTL_INTENA);
1096 bus_space_write_4(st, sh, EPIC_INTMASK, 0);
1097
1098 /*
1099 * Stop the DMA engine and take the receiver off-line.
1100 */
1101 bus_space_write_4(st, sh, EPIC_COMMAND, COMMAND_STOP_RDMA |
1102 COMMAND_STOP_TDMA | COMMAND_STOP_RX);
1103
1104 /*
1105 * Release any queued transmit buffers.
1106 */
1107 for (i = 0; i < EPIC_NTXDESC; i++) {
1108 ds = EPIC_DSTX(sc, i);
1109 if (ds->ds_mbuf != NULL) {
1110 bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap);
1111 m_freem(ds->ds_mbuf);
1112 ds->ds_mbuf = NULL;
1113 }
1114 }
1115
1116 /*
1117 * Mark the interface down and cancel the watchdog timer.
1118 */
1119 ifp->if_flags &= ~IFF_RUNNING;
1120 ifp->if_timer = 0;
1121
1122 if (disable)
1123 epic_rxdrain(sc);
1124 }
1125
1126 /*
1127 * Read the EPIC Serial EEPROM.
1128 */
1129 static void
epic_read_eeprom(struct epic_softc * sc,int word,int wordcnt,uint16_t * data)1130 epic_read_eeprom(struct epic_softc *sc, int word, int wordcnt, uint16_t *data)
1131 {
1132 bus_space_tag_t st = sc->sc_st;
1133 bus_space_handle_t sh = sc->sc_sh;
1134 uint16_t reg;
1135 int i, x;
1136
1137 #define EEPROM_WAIT_READY(st, sh) \
1138 while ((bus_space_read_4((st), (sh), EPIC_EECTL) & EECTL_EERDY) == 0) \
1139 /* nothing */
1140
1141 /*
1142 * Enable the EEPROM.
1143 */
1144 bus_space_write_4(st, sh, EPIC_EECTL, EECTL_ENABLE);
1145 EEPROM_WAIT_READY(st, sh);
1146
1147 for (i = 0; i < wordcnt; i++) {
1148 /* Send CHIP SELECT for one clock tick. */
1149 bus_space_write_4(st, sh, EPIC_EECTL,
1150 EECTL_ENABLE | EECTL_EECS);
1151 EEPROM_WAIT_READY(st, sh);
1152
1153 /* Shift in the READ opcode. */
1154 for (x = 3; x > 0; x--) {
1155 reg = EECTL_ENABLE | EECTL_EECS;
1156 if (EPIC_EEPROM_OPC_READ & (1 << (x - 1)))
1157 reg |= EECTL_EEDI;
1158 bus_space_write_4(st, sh, EPIC_EECTL, reg);
1159 EEPROM_WAIT_READY(st, sh);
1160 bus_space_write_4(st, sh, EPIC_EECTL, reg |EECTL_EESK);
1161 EEPROM_WAIT_READY(st, sh);
1162 bus_space_write_4(st, sh, EPIC_EECTL, reg);
1163 EEPROM_WAIT_READY(st, sh);
1164 }
1165
1166 /* Shift in address. */
1167 for (x = 6; x > 0; x--) {
1168 reg = EECTL_ENABLE | EECTL_EECS;
1169 if ((word + i) & (1 << (x - 1)))
1170 reg |= EECTL_EEDI;
1171 bus_space_write_4(st, sh, EPIC_EECTL, reg);
1172 EEPROM_WAIT_READY(st, sh);
1173 bus_space_write_4(st, sh, EPIC_EECTL, reg |EECTL_EESK);
1174 EEPROM_WAIT_READY(st, sh);
1175 bus_space_write_4(st, sh, EPIC_EECTL, reg);
1176 EEPROM_WAIT_READY(st, sh);
1177 }
1178
1179 /* Shift out data. */
1180 reg = EECTL_ENABLE | EECTL_EECS;
1181 data[i] = 0;
1182 for (x = 16; x > 0; x--) {
1183 bus_space_write_4(st, sh, EPIC_EECTL, reg |EECTL_EESK);
1184 EEPROM_WAIT_READY(st, sh);
1185 if (bus_space_read_4(st, sh, EPIC_EECTL) & EECTL_EEDO)
1186 data[i] |= (1 << (x - 1));
1187 bus_space_write_4(st, sh, EPIC_EECTL, reg);
1188 EEPROM_WAIT_READY(st, sh);
1189 }
1190
1191 /* Clear CHIP SELECT. */
1192 bus_space_write_4(st, sh, EPIC_EECTL, EECTL_ENABLE);
1193 EEPROM_WAIT_READY(st, sh);
1194 }
1195
1196 /*
1197 * Disable the EEPROM.
1198 */
1199 bus_space_write_4(st, sh, EPIC_EECTL, 0);
1200
1201 #undef EEPROM_WAIT_READY
1202 }
1203
1204 /*
1205 * Add a receive buffer to the indicated descriptor.
1206 */
1207 static int
epic_add_rxbuf(struct epic_softc * sc,int idx)1208 epic_add_rxbuf(struct epic_softc *sc, int idx)
1209 {
1210 struct epic_descsoft *ds = EPIC_DSRX(sc, idx);
1211 struct mbuf *m;
1212 int error;
1213
1214 MGETHDR(m, M_DONTWAIT, MT_DATA);
1215 if (m == NULL)
1216 return ENOBUFS;
1217 MCLAIM(m, &sc->sc_ethercom.ec_rx_mowner);
1218
1219 MCLGET(m, M_DONTWAIT);
1220 if ((m->m_flags & M_EXT) == 0) {
1221 m_freem(m);
1222 return ENOBUFS;
1223 }
1224
1225 if (ds->ds_mbuf != NULL)
1226 bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap);
1227
1228 ds->ds_mbuf = m;
1229
1230 error = bus_dmamap_load(sc->sc_dmat, ds->ds_dmamap,
1231 m->m_ext.ext_buf, m->m_ext.ext_size, NULL,
1232 BUS_DMA_READ | BUS_DMA_NOWAIT);
1233 if (error) {
1234 printf("%s: can't load rx DMA map %d, error = %d\n",
1235 device_xname(sc->sc_dev), idx, error);
1236 panic("%s", __func__); /* XXX */
1237 }
1238
1239 bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0,
1240 ds->ds_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD);
1241
1242 EPIC_INIT_RXDESC(sc, idx);
1243
1244 return 0;
1245 }
1246
1247 /*
1248 * Set the EPIC multicast hash table.
1249 *
1250 * NOTE: We rely on a recently-updated mii_media_active here!
1251 */
1252 static void
epic_set_mchash(struct epic_softc * sc)1253 epic_set_mchash(struct epic_softc *sc)
1254 {
1255 struct ethercom *ec = &sc->sc_ethercom;
1256 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
1257 struct ether_multi *enm;
1258 struct ether_multistep step;
1259 uint32_t hash, mchash[4];
1260
1261 /*
1262 * Set up the multicast address filter by passing all multicast
1263 * addresses through a CRC generator, and then using the low-order
1264 * 6 bits as an index into the 64 bit multicast hash table (only
1265 * the lower 16 bits of each 32 bit multicast hash register are
1266 * valid). The high order bits select the register, while the
1267 * rest of the bits select the bit within the register.
1268 */
1269
1270 if (ifp->if_flags & IFF_PROMISC)
1271 goto allmulti;
1272
1273 if (IFM_SUBTYPE(sc->sc_mii.mii_media_active) == IFM_10_T) {
1274 /* XXX hardware bug in 10Mbps mode. */
1275 goto allmulti;
1276 }
1277
1278 mchash[0] = mchash[1] = mchash[2] = mchash[3] = 0;
1279
1280 ETHER_LOCK(ec);
1281 ETHER_FIRST_MULTI(step, ec, enm);
1282 while (enm != NULL) {
1283 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) {
1284 /*
1285 * We must listen to a range of multicast addresses.
1286 * For now, just accept all multicasts, rather than
1287 * trying to set only those filter bits needed to match
1288 * the range. (At this time, the only use of address
1289 * ranges is for IP multicast routing, for which the
1290 * range is big enough to require all bits set.)
1291 */
1292 ETHER_UNLOCK(ec);
1293 goto allmulti;
1294 }
1295
1296 hash = ether_crc32_be(enm->enm_addrlo, ETHER_ADDR_LEN);
1297 hash >>= 26;
1298
1299 /* Set the corresponding bit in the hash table. */
1300 mchash[hash >> 4] |= 1 << (hash & 0xf);
1301
1302 ETHER_NEXT_MULTI(step, enm);
1303 }
1304 ETHER_UNLOCK(ec);
1305
1306 ifp->if_flags &= ~IFF_ALLMULTI;
1307 goto sethash;
1308
1309 allmulti:
1310 ifp->if_flags |= IFF_ALLMULTI;
1311 mchash[0] = mchash[1] = mchash[2] = mchash[3] = 0xffff;
1312
1313 sethash:
1314 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MC0, mchash[0]);
1315 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MC1, mchash[1]);
1316 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MC2, mchash[2]);
1317 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MC3, mchash[3]);
1318 }
1319
1320 /*
1321 * Wait for the MII to become ready.
1322 */
1323 static int
epic_mii_wait(struct epic_softc * sc,uint32_t rw)1324 epic_mii_wait(struct epic_softc *sc, uint32_t rw)
1325 {
1326 int i;
1327
1328 for (i = 0; i < 50; i++) {
1329 if ((bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_MMCTL) & rw)
1330 == 0)
1331 break;
1332 delay(2);
1333 }
1334 if (i == 50) {
1335 printf("%s: MII timed out\n", device_xname(sc->sc_dev));
1336 return ETIMEDOUT;
1337 }
1338
1339 return 0;
1340 }
1341
1342 /*
1343 * Read from the MII.
1344 */
1345 static int
epic_mii_read(device_t self,int phy,int reg,uint16_t * val)1346 epic_mii_read(device_t self, int phy, int reg, uint16_t *val)
1347 {
1348 struct epic_softc *sc = device_private(self);
1349 int rv;
1350
1351 if ((rv = epic_mii_wait(sc, MMCTL_WRITE)) != 0)
1352 return rv;
1353
1354 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MMCTL,
1355 MMCTL_ARG(phy, reg, MMCTL_READ));
1356
1357 if ((rv = epic_mii_wait(sc, MMCTL_READ)) != 0)
1358 return rv;
1359
1360 *val = bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_MMDATA)
1361 & MMDATA_MASK;
1362 return 0;
1363 }
1364
1365 /*
1366 * Write to the MII.
1367 */
1368 static int
epic_mii_write(device_t self,int phy,int reg,uint16_t val)1369 epic_mii_write(device_t self, int phy, int reg, uint16_t val)
1370 {
1371 struct epic_softc *sc = device_private(self);
1372 int rv;
1373
1374 if ((rv = epic_mii_wait(sc, MMCTL_WRITE)) != 0)
1375 return rv;
1376
1377 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MMDATA, val);
1378 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MMCTL,
1379 MMCTL_ARG(phy, reg, MMCTL_WRITE));
1380
1381 return 0;
1382 }
1383
1384 /*
1385 * Callback from PHY when media changes.
1386 */
1387 static void
epic_statchg(struct ifnet * ifp)1388 epic_statchg(struct ifnet *ifp)
1389 {
1390 struct epic_softc *sc = ifp->if_softc;
1391 uint32_t txcon, miicfg;
1392
1393 /*
1394 * Update loopback bits in TXCON to reflect duplex mode.
1395 */
1396 txcon = bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_TXCON);
1397 if (sc->sc_mii.mii_media_active & IFM_FDX)
1398 txcon |= (TXCON_LOOPBACK_D1 | TXCON_LOOPBACK_D2);
1399 else
1400 txcon &= ~(TXCON_LOOPBACK_D1 | TXCON_LOOPBACK_D2);
1401 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_TXCON, txcon);
1402
1403 /* On some cards we need manualy set fullduplex led */
1404 if (sc->sc_hwflags & EPIC_DUPLEXLED_ON_694) {
1405 miicfg = bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_MIICFG);
1406 if (IFM_OPTIONS(sc->sc_mii.mii_media_active) & IFM_FDX)
1407 miicfg |= MIICFG_ENABLE;
1408 else
1409 miicfg &= ~MIICFG_ENABLE;
1410 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MIICFG, miicfg);
1411 }
1412
1413 /*
1414 * There is a multicast filter bug in 10Mbps mode. Kick the
1415 * multicast filter in case the speed changed.
1416 */
1417 epic_set_mchash(sc);
1418 }
1419
1420 /*
1421 * Callback from ifmedia to request new media setting.
1422 *
1423 * XXX Looks to me like some of this complexity should move into
1424 * XXX one or two custom PHY drivers. --dyoung
1425 */
1426 static int
epic_mediachange(struct ifnet * ifp)1427 epic_mediachange(struct ifnet *ifp)
1428 {
1429 struct epic_softc *sc = ifp->if_softc;
1430 struct mii_data *mii = &sc->sc_mii;
1431 struct ifmedia *ifm = &mii->mii_media;
1432 int media = ifm->ifm_cur->ifm_media;
1433 uint32_t miicfg;
1434 struct mii_softc *miisc;
1435 int rc;
1436 uint16_t cfg;
1437
1438 if ((ifp->if_flags & IFF_UP) == 0)
1439 return 0;
1440
1441 if (IFM_INST(media) != sc->sc_serinst) {
1442 /* If we're not selecting serial interface, select MII mode */
1443 #ifdef EPICMEDIADEBUG
1444 printf("%s: parallel mode\n", ifp->if_xname);
1445 #endif
1446 miicfg = bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_MIICFG);
1447 miicfg &= ~MIICFG_SERMODEENA;
1448 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MIICFG, miicfg);
1449 }
1450
1451 if ((rc = mii_mediachg(mii)) == ENXIO)
1452 rc = 0;
1453
1454 if (IFM_INST(media) == sc->sc_serinst) {
1455 /* select serial interface */
1456 #ifdef EPICMEDIADEBUG
1457 printf("%s: serial mode\n", ifp->if_xname);
1458 #endif
1459 miicfg = bus_space_read_4(sc->sc_st, sc->sc_sh, EPIC_MIICFG);
1460 miicfg |= (MIICFG_SERMODEENA | MIICFG_ENABLE);
1461 bus_space_write_4(sc->sc_st, sc->sc_sh, EPIC_MIICFG, miicfg);
1462
1463 /* There is no driver to fill this */
1464 mii->mii_media_active = media;
1465 mii->mii_media_status = 0;
1466
1467 epic_statchg(mii->mii_ifp);
1468 return 0;
1469 }
1470
1471 /* Lookup selected PHY */
1472 LIST_FOREACH(miisc, &mii->mii_phys, mii_list) {
1473 if (IFM_INST(media) == miisc->mii_inst)
1474 break;
1475 }
1476 if (!miisc) {
1477 printf("%s: can't happen\n", __func__); /* ??? panic */
1478 return 0;
1479 }
1480 #ifdef EPICMEDIADEBUG
1481 printf("%s: using phy %s\n", ifp->if_xname,
1482 device_xname(miisc->mii_dev));
1483 #endif
1484
1485 if (miisc->mii_flags & MIIF_HAVEFIBER) {
1486 /* XXX XXX assume it's a Level1 - should check */
1487
1488 /* We have to powerup fiber transceivers */
1489 PHY_READ(miisc, MII_LXTPHY_CONFIG, &cfg);
1490 if (IFM_SUBTYPE(media) == IFM_100_FX) {
1491 #ifdef EPICMEDIADEBUG
1492 printf("%s: power up fiber\n", ifp->if_xname);
1493 #endif
1494 cfg |= (CONFIG_LEDC1 | CONFIG_LEDC0);
1495 } else {
1496 #ifdef EPICMEDIADEBUG
1497 printf("%s: power down fiber\n", ifp->if_xname);
1498 #endif
1499 cfg &= ~(CONFIG_LEDC1 | CONFIG_LEDC0);
1500 }
1501 PHY_WRITE(miisc, MII_LXTPHY_CONFIG, cfg);
1502 }
1503
1504 return rc;
1505 }
1506