xref: /freebsd/sys/dev/safexcel/safexcel_var.h (revision 95ee2897)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause
3  *
4  * Copyright (c) 2020 Rubicon Communications, LLC (Netgate)
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25  */
26 
27 #ifndef _SAFEXCEL_VAR_H_
28 #define	_SAFEXCEL_VAR_H_
29 
30 #include <sys/counter.h>
31 
32 #define	SAFEXCEL_MAX_RINGS			4
33 #define	SAFEXCEL_MAX_BATCH_SIZE			64
34 #define	SAFEXCEL_MAX_FRAGMENTS			64
35 #define	SAFEXCEL_MAX_IV_LEN			16
36 #define	SAFEXCEL_MAX_REQUEST_SIZE		65535
37 
38 #define	SAFEXCEL_RING_SIZE			512
39 #define	SAFEXCEL_MAX_ITOKENS			4
40 #define	SAFEXCEL_MAX_ATOKENS			16
41 #define	SAFEXCEL_FETCH_COUNT			1
42 #define	SAFEXCEL_MAX_KEY_LEN			32
43 #define	SAFEXCEL_MAX_RING_AIC			14
44 
45 /*
46  * Context Record format.
47  *
48  * In this driver the context control words are always set in the control data.
49  * This helps optimize fetching of the context record.  This is configured by
50  * setting SAFEXCEL_OPTION_CTX_CTRL_IN_CMD.
51  */
52 struct safexcel_context_record {
53 	uint32_t control0;	/* Unused. */
54 	uint32_t control1;	/* Unused. */
55 	uint32_t data[40];	/* Key material. */
56 } __packed;
57 
58 /* Processing Engine Control Data format. */
59 struct safexcel_control_data {
60 	uint32_t packet_length	: 17;
61 	uint32_t options	: 13;
62 	uint32_t type		: 2;
63 
64 	uint16_t application_id;
65 	uint16_t rsvd;
66 
67 	uint32_t context_lo;
68 	uint32_t context_hi;
69 
70 	uint32_t control0;
71 	uint32_t control1;
72 
73 	/* Inline instructions or IV. */
74 	uint32_t token[SAFEXCEL_MAX_ITOKENS];
75 } __packed;
76 
77 /*
78  * Basic Command Descriptor.
79  *
80  * The Processing Engine and driver cooperate to maintain a set of command
81  * rings, representing outstanding crypto operation requests.  Each descriptor
82  * corresponds to an input data segment, and thus a single crypto(9) request may
83  * span several contiguous command descriptors.
84  *
85  * The first command descriptor for a request stores the input token, which
86  * encodes data specific to the requested operation, such as the encryption
87  * mode.  For some operations data is passed outside the descriptor, in a
88  * context record (e.g., encryption keys), or in an "additional token data"
89  * region (e.g., instructions).
90  */
91 struct safexcel_cmd_descr {
92 	uint32_t particle_size	: 17;
93 	uint32_t rsvd0		: 5;
94 	uint32_t last_seg	: 1;
95 	uint32_t first_seg	: 1;
96 	uint32_t additional_cdata_size : 8;
97 	uint32_t rsvd1;
98 
99 	uint32_t data_lo;
100 	uint32_t data_hi;
101 
102 	uint32_t atok_lo;
103 	uint32_t atok_hi;
104 
105 	struct safexcel_control_data control_data;
106 } __packed;
107 
108 /* Context control word 0 fields. */
109 #define	SAFEXCEL_CONTROL0_TYPE_NULL_OUT		0x0
110 #define	SAFEXCEL_CONTROL0_TYPE_NULL_IN		0x1
111 #define	SAFEXCEL_CONTROL0_TYPE_HASH_OUT		0x2
112 #define	SAFEXCEL_CONTROL0_TYPE_HASH_IN		0x3
113 #define	SAFEXCEL_CONTROL0_TYPE_CRYPTO_OUT	0x4
114 #define	SAFEXCEL_CONTROL0_TYPE_CRYPTO_IN	0x5
115 #define	SAFEXCEL_CONTROL0_TYPE_ENCRYPT_HASH_OUT	0x6
116 #define	SAFEXCEL_CONTROL0_TYPE_DECRYPT_HASH_IN	0x7
117 #define	SAFEXCEL_CONTROL0_TYPE_HASH_ENCRYPT_OUT	0xe
118 #define	SAFEXCEL_CONTROL0_TYPE_HASH_DECRYPT_IN	0xf
119 #define	SAFEXCEL_CONTROL0_RESTART_HASH		(1 << 4)
120 #define	SAFEXCEL_CONTROL0_NO_FINISH_HASH	(1 << 5)
121 #define	SAFEXCEL_CONTROL0_SIZE(n)		(((n) & 0xff) << 8)
122 #define	SAFEXCEL_CONTROL0_KEY_EN		(1 << 16)
123 #define	SAFEXCEL_CONTROL0_CRYPTO_ALG_AES128	(0x5 << 17)
124 #define	SAFEXCEL_CONTROL0_CRYPTO_ALG_AES192	(0x6 << 17)
125 #define	SAFEXCEL_CONTROL0_CRYPTO_ALG_AES256	(0x7 << 17)
126 #define	SAFEXCEL_CONTROL0_DIGEST_PRECOMPUTED	(0x1 << 21)
127 #define	SAFEXCEL_CONTROL0_DIGEST_CCM		(0x2 << 21)
128 #define	SAFEXCEL_CONTROL0_DIGEST_GMAC		(0x2 << 21)
129 #define	SAFEXCEL_CONTROL0_DIGEST_HMAC		(0x3 << 21)
130 #define	SAFEXCEL_CONTROL0_HASH_ALG_SHA1		(0x2 << 23)
131 #define	SAFEXCEL_CONTROL0_HASH_ALG_SHA224	(0x4 << 23)
132 #define	SAFEXCEL_CONTROL0_HASH_ALG_SHA256	(0x3 << 23)
133 #define	SAFEXCEL_CONTROL0_HASH_ALG_SHA384	(0x6 << 23)
134 #define	SAFEXCEL_CONTROL0_HASH_ALG_SHA512	(0x5 << 23)
135 #define	SAFEXCEL_CONTROL0_HASH_ALG_XCBC128	(0x1 << 23)
136 #define	SAFEXCEL_CONTROL0_HASH_ALG_XCBC192	(0x2 << 23)
137 #define	SAFEXCEL_CONTROL0_HASH_ALG_XCBC256	(0x3 << 23)
138 #define	SAFEXCEL_CONTROL0_HASH_ALG_GHASH	(0x4 << 23)
139 #define	SAFEXCEL_CONTROL0_INV_FR		(0x5 << 24)
140 #define	SAFEXCEL_CONTROL0_INV_TR		(0x6 << 24)
141 
142 /* Context control word 1 fields. */
143 #define	SAFEXCEL_CONTROL1_CRYPTO_MODE_ECB	0x0
144 #define	SAFEXCEL_CONTROL1_CRYPTO_MODE_CBC	0x1
145 #define	SAFEXCEL_CONTROL1_CRYPTO_MODE_ICM	0x3
146 #define	SAFEXCEL_CONTROL1_CRYPTO_MODE_OFB	0x4
147 #define	SAFEXCEL_CONTROL1_CRYPTO_MODE_CFB128	0x5
148 #define	SAFEXCEL_CONTROL1_CRYPTO_MODE_CTR	0x6
149 #define	SAFEXCEL_CONTROL1_CRYPTO_MODE_XTS	0x7
150 #define	SAFEXCEL_CONTROL1_CRYPTO_MODE_CCM	(0x6 | (1 << 17))
151 #define	SAFEXCEL_CONTROL1_CRYPTO_MODE_GCM	(0x6 | (1 << 17))
152 #define	SAFEXCEL_CONTROL1_IV0			(1u << 5)
153 #define	SAFEXCEL_CONTROL1_IV1			(1u << 6)
154 #define	SAFEXCEL_CONTROL1_IV2			(1u << 7)
155 #define	SAFEXCEL_CONTROL1_IV3			(1u << 8)
156 #define	SAFEXCEL_CONTROL1_DIGEST_CNT		(1u << 9)
157 #define	SAFEXCEL_CONTROL1_COUNTER_MODE		(1u << 10)
158 #define	SAFEXCEL_CONTROL1_ENCRYPT_HASH_RES	(1u << 17)
159 #define	SAFEXCEL_CONTROL1_HASH_STORE		(1u << 19)
160 
161 /* Control options. */
162 #define	SAFEXCEL_OPTION_IP			(1u << 0) /* must be set */
163 #define	SAFEXCEL_OPTION_CP			(1u << 1) /* 64-bit ctx addr */
164 #define	SAFEXCEL_OPTION_RC_AUTO			(2u << 3) /* auto ctx reuse */
165 #define	SAFEXCEL_OPTION_CTX_CTRL_IN_CMD		(1u << 8) /* ctx ctrl */
166 #define	SAFEXCEL_OPTION_4_TOKEN_IV_CMD		0xe00     /* IV in bypass */
167 
168 struct safexcel_res_data {
169 	uint32_t packet_length	: 17;
170 	uint32_t error_code	: 15;
171 
172 	uint32_t bypass_length	: 4;
173 	uint32_t e15		: 1;
174 	uint32_t rsvd0		: 16;
175 	uint32_t hash_bytes	: 1;
176 	uint32_t hash_length	: 6;
177 	uint32_t generic_bytes	: 1;
178 	uint32_t checksum	: 1;
179 	uint32_t next_header	: 1;
180 	uint32_t length		: 1;
181 
182 	uint16_t application_id;
183 	uint16_t rsvd1;
184 
185 	uint32_t rsvd2;
186 };
187 
188 /* Basic Result Descriptor format */
189 struct safexcel_res_descr {
190 	uint32_t particle_size	: 17;
191 	uint32_t rsvd0		: 3;
192 	uint32_t descriptor_overflow : 1;
193 	uint32_t buffer_overflow : 1;
194 	uint32_t last_seg	: 1;
195 	uint32_t first_seg	: 1;
196 	uint32_t result_size	: 8;
197 
198 	uint32_t rsvd1;
199 
200 	uint32_t data_lo;
201 	uint32_t data_hi;
202 
203 	struct safexcel_res_data result_data;
204 } __packed;
205 
206 /* Result data error codes. */
207 #define	SAFEXCEL_RESULT_ERR_PACKET_LEN		(1u << 0)
208 #define	SAFEXCEL_RESULT_ERR_TOKEN_ERROR		(1u << 1)
209 #define	SAFEXCEL_RESULT_ERR_BYPASS		(1u << 2)
210 #define	SAFEXCEL_RESULT_ERR_CRYPTO_BLOCK_SIZE	(1u << 3)
211 #define	SAFEXCEL_RESULT_ERR_HASH_BLOCK_SIZE	(1u << 4)
212 #define	SAFEXCEL_RESULT_ERR_INVALID_CMD		(1u << 5)
213 #define	SAFEXCEL_RESULT_ERR_PROHIBITED_ALGO	(1u << 6)
214 #define	SAFEXCEL_RESULT_ERR_HASH_INPUT_OVERFLOW	(1u << 7)
215 #define	SAFEXCEL_RESULT_ERR_TTL_UNDERFLOW	(1u << 8)
216 #define	SAFEXCEL_RESULT_ERR_AUTH_FAILED		(1u << 9)
217 #define	SAFEXCEL_RESULT_ERR_SEQNO_CHECK_FAILED	(1u << 10)
218 #define	SAFEXCEL_RESULT_ERR_SPI_CHECK		(1u << 11)
219 #define	SAFEXCEL_RESULT_ERR_CHECKSUM		(1u << 12)
220 #define	SAFEXCEL_RESULT_ERR_PAD_VERIFICATION	(1u << 13)
221 #define	SAFEXCEL_RESULT_ERR_TIMEOUT		(1u << 14)
222 #define	SAFEXCEL_RESULT_ERR_OUTPUT_DMA		(1u << 15)
223 
224 /*
225  * The EIP-96 (crypto transform engine) is programmed using a set of
226  * data processing instructions with the encodings defined below.
227  */
228 struct safexcel_instr {
229 	uint32_t length : 17;		/* bytes to be processed */
230 	uint32_t status : 2;		/* stream status */
231 	uint32_t instructions : 9;
232 	uint32_t opcode : 4;
233 } __packed;
234 
235 /* Type 1, operational data instructions. */
236 #define	SAFEXCEL_INSTR_OPCODE_DIRECTION		0x0
237 #define	SAFEXCEL_INSTR_OPCODE_PRE_CHECKSUM	0x1
238 #define	SAFEXCEL_INSTR_OPCODE_INSERT		0x2
239 #define	SAFEXCEL_INSTR_OPCODE_INSERT_CTX	0x9
240 #define	SAFEXCEL_INSTR_OPCODE_REPLACE		0x3
241 #define	SAFEXCEL_INSTR_OPCODE_RETRIEVE		0x4
242 #define	SAFEXCEL_INSTR_OPCODE_MUTE		0x5
243 /* Type 2, IP header instructions. */
244 #define	SAFEXCEL_INSTR_OPCODE_IPV4		0x7
245 #define	SAFEXCEL_INSTR_OPCODE_IPV4_CHECKSUM	0x6
246 #define	SAFEXCEL_INSTR_OPCODE_IPV6		0x8
247 /* Type 3, postprocessing instructions. */
248 #define	SAFEXCEL_INSTR_OPCODE_INSERT_REMOVE_RESULT 0xa
249 #define	SAFEXCEL_INSTR_OPCODE_REPLACE_BYTE	0xb
250 /* Type 4, result instructions. */
251 #define	SAFEXCEL_INSTR_OPCODE_VERIFY_FIELDS	0xd
252 /* Type 5, context control instructions. */
253 #define	SAFEXCEL_INSTR_OPCODE_CONTEXT_ACCESS	0xe
254 /* Type 6, context control instructions. */
255 #define	SAFEXCEL_INSTR_OPCODE_BYPASS_TOKEN_DATA	0xf
256 
257 /* Status bits for type 1 and 2 instructions. */
258 #define	SAFEXCEL_INSTR_STATUS_LAST_HASH		(1u << 0)
259 #define	SAFEXCEL_INSTR_STATUS_LAST_PACKET	(1u << 1)
260 /* Status bits for type 3 instructions. */
261 #define	SAFEXCEL_INSTR_STATUS_NO_CKSUM_MOD	(1u << 0)
262 
263 /* Instruction-dependent flags. */
264 #define	SAFEXCEL_INSTR_INSERT_HASH_DIGEST	0x1c
265 #define	SAFEXCEL_INSTR_INSERT_IMMEDIATE		0x1b
266 #define	SAFEXCEL_INSTR_DEST_OUTPUT		(1u << 5)
267 #define	SAFEXCEL_INSTR_DEST_HASH		(1u << 6)
268 #define	SAFEXCEL_INSTR_DEST_CRYPTO		(1u << 7)
269 #define	SAFEXCEL_INSTR_INS_LAST			(1u << 8)
270 
271 #define	SAFEXCEL_INSTR_VERIFY_HASH		(1u << 16)
272 #define	SAFEXCEL_INSTR_VERIFY_PADDING		(1u << 5)
273 
274 #define	SAFEXCEL_TOKEN_TYPE_BYPASS	0x0
275 #define	SAFEXCEL_TOKEN_TYPE_AUTONOMOUS	0x3
276 
277 #define	SAFEXCEL_CONTEXT_SMALL		0x2
278 #define	SAFEXCEL_CONTEXT_LARGE		0x3
279 
280 struct safexcel_reg_offsets {
281 	uint32_t hia_aic;
282 	uint32_t hia_aic_g;
283 	uint32_t hia_aic_r;
284 	uint32_t hia_aic_xdr;
285 	uint32_t hia_dfe;
286 	uint32_t hia_dfe_thr;
287 	uint32_t hia_dse;
288 	uint32_t hia_dse_thr;
289 	uint32_t hia_gen_cfg;
290 	uint32_t pe;
291 };
292 
293 struct safexcel_config {
294 	uint32_t	hdw;		/* Host interface Data Width. */
295 	uint32_t	aic_rings;	/* Number of AIC rings. */
296 	uint32_t	pes;		/* Number of PEs. */
297 	uint32_t	rings;		/* Number of rings. */
298 
299 	uint32_t	cd_size;	/* CDR descriptor size. */
300 	uint32_t	cd_offset;	/* CDR offset (size + alignment). */
301 
302 	uint32_t	rd_size;	/* RDR descriptor size. */
303 	uint32_t	rd_offset;	/* RDR offset. */
304 
305 	uint32_t	atok_offset;	/* Additional token offset. */
306 
307 	uint32_t	caps;		/* Device capabilities. */
308 };
309 
310 #define	SAFEXCEL_DPRINTF(sc, lvl, ...) do {				\
311 	if ((sc)->sc_debug >= (lvl))					\
312 		device_printf((sc)->sc_dev, __VA_ARGS__);		\
313 } while (0)
314 
315 struct safexcel_dma_mem {
316 	caddr_t		vaddr;
317 	bus_addr_t	paddr;
318 	bus_dma_tag_t	tag;
319 	bus_dmamap_t	map;
320 };
321 
322 struct safexcel_cmd_descr_ring {
323 	struct safexcel_dma_mem		dma;
324 	struct safexcel_cmd_descr	*desc;
325 	int				write;
326 	int				read;
327 };
328 
329 struct safexcel_res_descr_ring {
330 	struct safexcel_dma_mem		dma;
331 	struct safexcel_res_descr	*desc;
332 	int				write;
333 	int				read;
334 };
335 
336 struct safexcel_context_template {
337 	struct safexcel_context_record	ctx;
338 	int				len;
339 };
340 
341 struct safexcel_session {
342 	crypto_session_t	cses;
343 	uint32_t		alg;		/* cipher algorithm */
344 	uint32_t		digest;		/* digest type */
345 	uint32_t		hash;		/* hash algorithm */
346 	uint32_t		mode;		/* cipher mode of operation */
347 	unsigned int		digestlen;	/* digest length */
348 	unsigned int		statelen;	/* HMAC hash state length */
349 
350 	struct safexcel_context_template encctx, decctx;
351 };
352 
353 struct safexcel_softc;
354 
355 struct safexcel_request {
356 	STAILQ_ENTRY(safexcel_request)	link;
357 	bool				dmap_loaded;
358 	int				ringidx;
359 	bus_dmamap_t			dmap;
360 	int				error;
361 	int				cdescs, rdescs;
362 	uint8_t				iv[SAFEXCEL_MAX_IV_LEN];
363 	struct safexcel_cmd_descr	*cdesc;
364 	struct safexcel_dma_mem		ctx;
365 	struct safexcel_session		*sess;
366 	struct cryptop			*crp;
367 	struct safexcel_softc		*sc;
368 };
369 
370 struct safexcel_ring {
371 	struct mtx			mtx;
372 	struct sglist			*cmd_data;
373 	struct safexcel_cmd_descr_ring	cdr;
374 	struct sglist			*res_data;
375 	struct safexcel_res_descr_ring	rdr;
376 
377 	/* Shadows the command descriptor ring. */
378 	struct safexcel_request		requests[SAFEXCEL_RING_SIZE];
379 
380 	/* Count of requests pending submission. */
381 	int				pending;
382 	int				pending_cdesc, pending_rdesc;
383 
384 	/* Count of outstanding requests. */
385 	int				queued;
386 
387 	/* Requests were deferred due to a resource shortage. */
388 	int				blocked;
389 
390 	struct safexcel_dma_mem		dma_atok;
391 	bus_dma_tag_t   		data_dtag;
392 
393 	char				lockname[32];
394 };
395 
396 struct safexcel_intr_handle {
397 	struct safexcel_softc		*sc;
398 	void				*handle;
399 	int				ring;
400 };
401 
402 struct safexcel_softc {
403 	device_t			sc_dev;
404 	uint32_t			sc_type;	/* EIP-97 or 197 */
405 	int				sc_debug;
406 
407 	struct resource			*sc_res;
408 	struct resource			*sc_intr[SAFEXCEL_MAX_RINGS];
409 	struct safexcel_intr_handle	sc_ih[SAFEXCEL_MAX_RINGS];
410 
411 	counter_u64_t			sc_req_alloc_failures;
412 	counter_u64_t			sc_cdesc_alloc_failures;
413 	counter_u64_t			sc_rdesc_alloc_failures;
414 
415 	struct safexcel_ring 		sc_ring[SAFEXCEL_MAX_RINGS];
416 
417 	int32_t				sc_cid;
418 	struct safexcel_reg_offsets 	sc_offsets;
419 	struct safexcel_config		sc_config;
420 };
421 
422 #define	SAFEXCEL_WRITE(sc, off, val)	bus_write_4((sc)->sc_res, (off), (val))
423 #define	SAFEXCEL_READ(sc, off)		bus_read_4((sc)->sc_res, (off))
424 
425 #define	SAFEXCEL_ADDR_LO(addr)		((uint64_t)(addr) & 0xffffffffu)
426 #define	SAFEXCEL_ADDR_HI(addr)		(((uint64_t)(addr) >> 32) & 0xffffffffu)
427 
428 #endif /* _SAFEXCEL_VAR_H_ */
429