1 /* $NetBSD: sysmonvar.h,v 1.49 2015/04/23 23:22:03 pgoyette Exp $ */ 2 3 /*- 4 * Copyright (c) 2000 Zembu Labs, Inc. 5 * All rights reserved. 6 * 7 * Author: Jason R. Thorpe <thorpej@zembu.com> 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. All advertising materials mentioning features or use of this software 18 * must display the following acknowledgement: 19 * This product includes software developed by Zembu Labs, Inc. 20 * 4. Neither the name of Zembu Labs nor the names of its employees may 21 * be used to endorse or promote products derived from this software 22 * without specific prior written permission. 23 * 24 * THIS SOFTWARE IS PROVIDED BY ZEMBU LABS, INC. ``AS IS'' AND ANY EXPRESS 25 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WAR- 26 * RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DIS- 27 * CLAIMED. IN NO EVENT SHALL ZEMBU LABS BE LIABLE FOR ANY DIRECT, INDIRECT, 28 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 29 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 30 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 31 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 32 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 33 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 34 */ 35 36 #ifndef _DEV_SYSMON_SYSMONVAR_H_ 37 #define _DEV_SYSMON_SYSMONVAR_H_ 38 39 #include <sys/param.h> 40 #include <sys/envsys.h> 41 #include <sys/wdog.h> 42 #include <sys/power.h> 43 #include <sys/queue.h> 44 #include <sys/callout.h> 45 #include <sys/mutex.h> 46 #include <sys/condvar.h> 47 #include <sys/rndsource.h> 48 49 struct lwp; 50 struct proc; 51 struct knote; 52 struct uio; 53 struct workqueue; 54 55 #define SYSMON_MINOR_ENVSYS 0 56 #define SYSMON_MINOR_WDOG 1 57 #define SYSMON_MINOR_POWER 2 58 59 /***************************************************************************** 60 * Environmental sensor support 61 *****************************************************************************/ 62 63 /* 64 * Thresholds/limits that are being monitored 65 */ 66 67 enum envsys_lims { 68 ENVSYS_LIM_CRITMAX, 69 ENVSYS_LIM_WARNMAX, 70 ENVSYS_LIM_WARNMIN, 71 ENVSYS_LIM_CRITMIN, 72 ENVSYS_LIM_LASTLIM 73 }; 74 75 struct sysmon_envsys_lim { 76 int32_t critmax; 77 int32_t warnmax; 78 int32_t warnmin; 79 int32_t critmin; 80 }; 81 82 typedef union { 83 int32_t sel_limit_list[ENVSYS_LIM_LASTLIM]; 84 struct sysmon_envsys_lim sel_limits; 85 } sysmon_envsys_lim_t; 86 87 #define sel_critmax sel_limits.critmax 88 #define sel_warnmax sel_limits.warnmax 89 #define sel_warnmin sel_limits.warnmin 90 #define sel_critmin sel_limits.critmin 91 92 /* struct used by a sensor */ 93 struct envsys_data { 94 TAILQ_ENTRY(envsys_data) sensors_head; 95 uint32_t sensor; /* sensor number */ 96 uint32_t units; /* type of sensor */ 97 uint32_t state; /* sensor state */ 98 uint32_t flags; /* sensor flags */ 99 uint32_t rpms; /* for fans, nominal RPMs */ 100 int32_t rfact; /* for volts, factor x 10^4 */ 101 int32_t value_cur; /* current value */ 102 int32_t value_prev; /* previous value */ 103 int32_t value_max; /* max value */ 104 int32_t value_min; /* min value */ 105 int32_t private; /* private data for drivers */ 106 sysmon_envsys_lim_t limits; /* thresholds for monitoring */ 107 uint32_t upropset; /* userland property set? */ 108 krndsource_t rnd_src; /* source element for rnd(4) */ 109 char desc[ENVSYS_DESCLEN]; /* sensor description */ 110 }; 111 112 typedef struct envsys_data envsys_data_t; 113 114 /* sensor flags */ 115 #define ENVSYS_FPERCENT 0x00000001 /* sensor wants a percentage */ 116 #define ENVSYS_FVALID_MAX 0x00000002 /* max value is ok */ 117 #define ENVSYS_FVALID_MIN 0x00000004 /* min value is ok */ 118 #define ENVSYS_F_OBSOLETE 0x00000008 119 #define ENVSYS_FCHANGERFACT 0x00000010 /* sensor can change rfact */ 120 121 /* monitoring flags */ 122 #define ENVSYS_FMONCRITICAL 0x00000020 /* monitor a critical state */ 123 #define ENVSYS_FMONLIMITS 0x00000040 /* monitor limits/thresholds */ 124 #define ENVSYS_FMONSTCHANGED 0x00000400 /* monitor a battery/drive state */ 125 #define ENVSYS_FMONANY \ 126 (ENVSYS_FMONCRITICAL | ENVSYS_FMONLIMITS | ENVSYS_FMONSTCHANGED) 127 #define ENVSYS_FMONNOTSUPP 0x00000800 /* monitoring not supported */ 128 #define ENVSYS_FNEED_REFRESH 0x00001000 /* sensor needs refreshing */ 129 #define ENVSYS_FHAS_ENTROPY 0x00002000 /* sensor provides entropy 130 for rnd(4) */ 131 132 /* 133 * Properties that can be set in upropset (and in the event_limit's 134 * flags field) 135 */ 136 #define PROP_CRITMAX 0x0001 137 #define PROP_CRITMIN 0x0002 138 #define PROP_WARNMAX 0x0004 139 #define PROP_WARNMIN 0x0008 140 #define PROP_BATTCAP 0x0010 141 #define PROP_BATTWARN 0x0020 142 #define PROP_BATTHIGH 0x0040 143 #define PROP_BATTMAX 0x0080 144 #define PROP_DESC 0x0100 145 #define PROP_RFACT 0x0200 146 147 #define PROP_DRIVER_LIMITS 0x8000 148 #define PROP_CAP_LIMITS (PROP_BATTCAP | PROP_BATTWARN | \ 149 PROP_BATTHIGH | PROP_BATTMAX) 150 #define PROP_VAL_LIMITS (PROP_CRITMAX | PROP_CRITMIN | \ 151 PROP_WARNMAX | PROP_WARNMIN) 152 #define PROP_LIMITS (PROP_CAP_LIMITS | PROP_VAL_LIMITS) 153 struct sme_event; 154 155 struct sysmon_envsys { 156 const char *sme_name; /* envsys device name */ 157 u_int sme_nsensors; /* sensors count, from driver */ 158 u_int sme_fsensor; /* sensor index base, from sysmon */ 159 #define SME_SENSOR_IDX(sme, idx) ((idx) - (sme)->sme_fsensor) 160 int sme_class; /* class of device */ 161 #define SME_CLASS_BATTERY 1 /* device is a battery */ 162 #define SME_CLASS_ACADAPTER 2 /* device is an AC adapter */ 163 int sme_flags; /* additional flags */ 164 #define SME_FLAG_BUSY 0x00000001 /* device busy */ 165 #define SME_DISABLE_REFRESH 0x00000002 /* disable sme_refresh */ 166 #define SME_CALLOUT_INITIALIZED 0x00000004 /* callout was initialized */ 167 #define SME_INIT_REFRESH 0x00000008 /* call sme_refresh() after 168 interrupts are enabled in 169 the autoconf(9) process. */ 170 #define SME_POLL_ONLY 0x00000010 /* only poll sme_refresh */ 171 172 void *sme_cookie; /* for ENVSYS back-end */ 173 174 /* 175 * Function callback to receive data from device. 176 */ 177 void (*sme_refresh)(struct sysmon_envsys *, envsys_data_t *); 178 179 /* 180 * Function callbacks to exchange limit/threshold values 181 * with device 182 */ 183 void (*sme_set_limits)(struct sysmon_envsys *, envsys_data_t *, 184 sysmon_envsys_lim_t *, uint32_t *); 185 void (*sme_get_limits)(struct sysmon_envsys *, envsys_data_t *, 186 sysmon_envsys_lim_t *, uint32_t *); 187 188 struct workqueue *sme_wq; /* the workqueue for the events */ 189 struct callout sme_callout; /* for the events */ 190 uint64_t sme_events_timeout; /* the timeout used in the callout */ 191 192 /* 193 * linked list for the sysmon envsys devices. 194 */ 195 LIST_ENTRY(sysmon_envsys) sme_list; 196 197 /* 198 * linked list for the events that a device maintains. 199 */ 200 LIST_HEAD(, sme_event) sme_events_list; 201 202 /* 203 * tailq for the sensors that a device maintains. 204 */ 205 TAILQ_HEAD(, envsys_data) sme_sensors_list; 206 207 /* 208 * Locking/synchronization. 209 */ 210 int sme_busy; /* number of items on workqueue, 211 sme_mtx or sme_work_mtx to read, 212 both to write */ 213 kmutex_t sme_mtx; 214 kmutex_t sme_work_mtx; 215 kcondvar_t sme_condvar; 216 }; 217 218 int sysmonopen_envsys(dev_t, int, int, struct lwp *); 219 int sysmonclose_envsys(dev_t, int, int, struct lwp *); 220 int sysmonioctl_envsys(dev_t, u_long, void *, int, struct lwp *); 221 222 struct sysmon_envsys *sysmon_envsys_create(void); 223 void sysmon_envsys_destroy(struct sysmon_envsys *); 224 225 int sysmon_envsys_register(struct sysmon_envsys *); 226 void sysmon_envsys_unregister(struct sysmon_envsys *); 227 228 int sysmon_envsys_sensor_attach(struct sysmon_envsys *, envsys_data_t *); 229 int sysmon_envsys_sensor_detach(struct sysmon_envsys *, envsys_data_t *); 230 231 uint32_t sysmon_envsys_get_max_value(bool (*)(const envsys_data_t*), bool); 232 233 void sysmon_envsys_sensor_event(struct sysmon_envsys *, envsys_data_t *, 234 int); 235 236 void sysmon_envsys_refresh_sensor(struct sysmon_envsys *, envsys_data_t *); 237 238 typedef bool (*sysmon_envsys_callback_t)(const struct sysmon_envsys *, 239 const envsys_data_t *, void*); 240 241 void sysmon_envsys_foreach_sensor(sysmon_envsys_callback_t, void *, bool); 242 243 int sysmon_envsys_update_limits(struct sysmon_envsys *, envsys_data_t *); 244 245 int sysmon_envsys_init(void); 246 int sysmon_envsys_fini(void); 247 248 /***************************************************************************** 249 * Watchdog timer support 250 *****************************************************************************/ 251 252 struct sysmon_wdog { 253 const char *smw_name; /* watchdog device name */ 254 255 LIST_ENTRY(sysmon_wdog) smw_list; 256 257 void *smw_cookie; /* for watchdog back-end */ 258 int (*smw_setmode)(struct sysmon_wdog *); 259 int (*smw_tickle)(struct sysmon_wdog *); 260 u_int smw_period; /* timer period (in seconds) */ 261 int smw_mode; /* timer mode */ 262 u_int smw_refcnt; /* references */ 263 pid_t smw_tickler; /* last process to tickle */ 264 }; 265 266 int sysmonopen_wdog(dev_t, int, int, struct lwp *); 267 int sysmonclose_wdog(dev_t, int, int, struct lwp *); 268 int sysmonioctl_wdog(dev_t, u_long, void *, int, struct lwp *); 269 270 int sysmon_wdog_setmode(struct sysmon_wdog *, int, u_int); 271 int sysmon_wdog_register(struct sysmon_wdog *); 272 int sysmon_wdog_unregister(struct sysmon_wdog *); 273 274 int sysmon_wdog_init(void); 275 int sysmon_wdog_fini(void); 276 277 /***************************************************************************** 278 * Power management support 279 *****************************************************************************/ 280 281 struct sysmon_pswitch { 282 const char *smpsw_name; /* power switch name */ 283 int smpsw_type; /* power switch type */ 284 285 LIST_ENTRY(sysmon_pswitch) smpsw_list; 286 }; 287 288 int sysmonopen_power(dev_t, int, int, struct lwp *); 289 int sysmonclose_power(dev_t, int, int, struct lwp *); 290 int sysmonread_power(dev_t, struct uio *, int); 291 int sysmonpoll_power(dev_t, int, struct lwp *); 292 int sysmonkqfilter_power(dev_t, struct knote *); 293 int sysmonioctl_power(dev_t, u_long, void *, int, struct lwp *); 294 295 void sysmon_power_settype(const char *); 296 297 int sysmon_pswitch_register(struct sysmon_pswitch *); 298 void sysmon_pswitch_unregister(struct sysmon_pswitch *); 299 300 void sysmon_pswitch_event(struct sysmon_pswitch *, int); 301 void sysmon_penvsys_event(struct penvsys_state *, int); 302 303 int sysmon_power_init(void); 304 int sysmon_power_fini(void); 305 306 /* 307 * Interface to sysmon common code used for autoloading 308 */ 309 struct sysmon_opvec { 310 int (*so_open)(dev_t, int, int, struct lwp*); 311 int (*so_close)(dev_t, int, int, struct lwp*); 312 int (*so_ioctl)(dev_t, u_long, void *, int, struct lwp*); 313 int (*so_read)(dev_t, struct uio*, int); 314 int (*so_poll)(dev_t, int, struct lwp*); 315 int (*so_filter)(dev_t, struct knote*); 316 }; 317 318 int sysmon_init(void); 319 int sysmon_fini(void); 320 int sysmon_attach_minor(int, struct sysmon_opvec*); 321 322 #endif /* _DEV_SYSMON_SYSMONVAR_H_ */ 323