| /openbsd/sbin/bioctl/ |
| H A D | bioctl.8 | 01de20b5 Mon Feb 08 11:20:03 GMT 2021 stsp <stsp@openbsd.org> Add a RAID1C (raid1 + crypto) softraid(8) discipline.
The RAID1C discipline encrypts data like the CRYPTO discipline, and accepts
multiple chunks during creation and assembly like the RAID1 discipline.
To deal with failing disks a RAID1C volume may be assembled with a smaller
number of chunks than the volume was created with. The volume will then come
up in degraded state. If the volume is now detached and assembled again with
the correct number of chunks, any re-added chunks will require a rebuild.
Consequently, assembling RAID1C volumes requires careful attention to the
chunks passed via 'bioctl -l'. If a chunk is accidentally omitted from the
command line during volume assembly, then this chunk will need to be rebuilt.
At least one known-good chunk is required in order to assemble the volume.
Like CRYPTO, RAID1C supports passphrase and key-disk authentication.
Key-disk based volumes are assembled automatically if the key disk is present
while the system is booting up.
Unlike CRYPTO and RAID1, there is no boot support for RAID1C yet.
RAID1C largely reuses existing code of RAID1 and CRYPTO disciplines.
At present RAID1C's discipline-specific data structure is shared with that
of the CRYPTO discipline to allow re-use of existing CRYPTO code. A custom
RAID1C data structure would require CRYPTO code to access struct sr_crypto
via a pointer instead of via a member field of struct sr_discipline.
ok jsing@
|
| H A D | bioctl.c | 01de20b5 Mon Feb 08 11:20:03 GMT 2021 stsp <stsp@openbsd.org> Add a RAID1C (raid1 + crypto) softraid(8) discipline.
The RAID1C discipline encrypts data like the CRYPTO discipline, and accepts
multiple chunks during creation and assembly like the RAID1 discipline.
To deal with failing disks a RAID1C volume may be assembled with a smaller
number of chunks than the volume was created with. The volume will then come
up in degraded state. If the volume is now detached and assembled again with
the correct number of chunks, any re-added chunks will require a rebuild.
Consequently, assembling RAID1C volumes requires careful attention to the
chunks passed via 'bioctl -l'. If a chunk is accidentally omitted from the
command line during volume assembly, then this chunk will need to be rebuilt.
At least one known-good chunk is required in order to assemble the volume.
Like CRYPTO, RAID1C supports passphrase and key-disk authentication.
Key-disk based volumes are assembled automatically if the key disk is present
while the system is booting up.
Unlike CRYPTO and RAID1, there is no boot support for RAID1C yet.
RAID1C largely reuses existing code of RAID1 and CRYPTO disciplines.
At present RAID1C's discipline-specific data structure is shared with that
of the CRYPTO discipline to allow re-use of existing CRYPTO code. A custom
RAID1C data structure would require CRYPTO code to access struct sr_crypto
via a pointer instead of via a member field of struct sr_discipline.
ok jsing@
|
| /openbsd/sys/dev/ |
| H A D | softraid_crypto.c | 01de20b5 Mon Feb 08 11:20:03 GMT 2021 stsp <stsp@openbsd.org> Add a RAID1C (raid1 + crypto) softraid(8) discipline.
The RAID1C discipline encrypts data like the CRYPTO discipline, and accepts
multiple chunks during creation and assembly like the RAID1 discipline.
To deal with failing disks a RAID1C volume may be assembled with a smaller
number of chunks than the volume was created with. The volume will then come
up in degraded state. If the volume is now detached and assembled again with
the correct number of chunks, any re-added chunks will require a rebuild.
Consequently, assembling RAID1C volumes requires careful attention to the
chunks passed via 'bioctl -l'. If a chunk is accidentally omitted from the
command line during volume assembly, then this chunk will need to be rebuilt.
At least one known-good chunk is required in order to assemble the volume.
Like CRYPTO, RAID1C supports passphrase and key-disk authentication.
Key-disk based volumes are assembled automatically if the key disk is present
while the system is booting up.
Unlike CRYPTO and RAID1, there is no boot support for RAID1C yet.
RAID1C largely reuses existing code of RAID1 and CRYPTO disciplines.
At present RAID1C's discipline-specific data structure is shared with that
of the CRYPTO discipline to allow re-use of existing CRYPTO code. A custom
RAID1C data structure would require CRYPTO code to access struct sr_crypto
via a pointer instead of via a member field of struct sr_discipline.
ok jsing@
|
| H A D | softraidvar.h | 01de20b5 Mon Feb 08 11:20:03 GMT 2021 stsp <stsp@openbsd.org> Add a RAID1C (raid1 + crypto) softraid(8) discipline.
The RAID1C discipline encrypts data like the CRYPTO discipline, and accepts
multiple chunks during creation and assembly like the RAID1 discipline.
To deal with failing disks a RAID1C volume may be assembled with a smaller
number of chunks than the volume was created with. The volume will then come
up in degraded state. If the volume is now detached and assembled again with
the correct number of chunks, any re-added chunks will require a rebuild.
Consequently, assembling RAID1C volumes requires careful attention to the
chunks passed via 'bioctl -l'. If a chunk is accidentally omitted from the
command line during volume assembly, then this chunk will need to be rebuilt.
At least one known-good chunk is required in order to assemble the volume.
Like CRYPTO, RAID1C supports passphrase and key-disk authentication.
Key-disk based volumes are assembled automatically if the key disk is present
while the system is booting up.
Unlike CRYPTO and RAID1, there is no boot support for RAID1C yet.
RAID1C largely reuses existing code of RAID1 and CRYPTO disciplines.
At present RAID1C's discipline-specific data structure is shared with that
of the CRYPTO discipline to allow re-use of existing CRYPTO code. A custom
RAID1C data structure would require CRYPTO code to access struct sr_crypto
via a pointer instead of via a member field of struct sr_discipline.
ok jsing@
|
| H A D | softraid.c | 01de20b5 Mon Feb 08 11:20:03 GMT 2021 stsp <stsp@openbsd.org> Add a RAID1C (raid1 + crypto) softraid(8) discipline.
The RAID1C discipline encrypts data like the CRYPTO discipline, and accepts
multiple chunks during creation and assembly like the RAID1 discipline.
To deal with failing disks a RAID1C volume may be assembled with a smaller
number of chunks than the volume was created with. The volume will then come
up in degraded state. If the volume is now detached and assembled again with
the correct number of chunks, any re-added chunks will require a rebuild.
Consequently, assembling RAID1C volumes requires careful attention to the
chunks passed via 'bioctl -l'. If a chunk is accidentally omitted from the
command line during volume assembly, then this chunk will need to be rebuilt.
At least one known-good chunk is required in order to assemble the volume.
Like CRYPTO, RAID1C supports passphrase and key-disk authentication.
Key-disk based volumes are assembled automatically if the key disk is present
while the system is booting up.
Unlike CRYPTO and RAID1, there is no boot support for RAID1C yet.
RAID1C largely reuses existing code of RAID1 and CRYPTO disciplines.
At present RAID1C's discipline-specific data structure is shared with that
of the CRYPTO discipline to allow re-use of existing CRYPTO code. A custom
RAID1C data structure would require CRYPTO code to access struct sr_crypto
via a pointer instead of via a member field of struct sr_discipline.
ok jsing@
|
| /openbsd/sys/conf/ |
| H A D | files | 01de20b5 Mon Feb 08 11:20:03 GMT 2021 stsp <stsp@openbsd.org> Add a RAID1C (raid1 + crypto) softraid(8) discipline.
The RAID1C discipline encrypts data like the CRYPTO discipline, and accepts
multiple chunks during creation and assembly like the RAID1 discipline.
To deal with failing disks a RAID1C volume may be assembled with a smaller
number of chunks than the volume was created with. The volume will then come
up in degraded state. If the volume is now detached and assembled again with
the correct number of chunks, any re-added chunks will require a rebuild.
Consequently, assembling RAID1C volumes requires careful attention to the
chunks passed via 'bioctl -l'. If a chunk is accidentally omitted from the
command line during volume assembly, then this chunk will need to be rebuilt.
At least one known-good chunk is required in order to assemble the volume.
Like CRYPTO, RAID1C supports passphrase and key-disk authentication.
Key-disk based volumes are assembled automatically if the key disk is present
while the system is booting up.
Unlike CRYPTO and RAID1, there is no boot support for RAID1C yet.
RAID1C largely reuses existing code of RAID1 and CRYPTO disciplines.
At present RAID1C's discipline-specific data structure is shared with that
of the CRYPTO discipline to allow re-use of existing CRYPTO code. A custom
RAID1C data structure would require CRYPTO code to access struct sr_crypto
via a pointer instead of via a member field of struct sr_discipline.
ok jsing@
|