/freebsd/sys/dev/ppbus/ |
H A D | pcfclock.c | 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits.
|
H A D | lpbb.c | 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits.
|
H A D | ppbconf.c | 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits.
|
H A D | ppi.c | 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits.
|
H A D | lpt.c | 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits.
|
H A D | pps.c | 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits.
|
H A D | if_plip.c | 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits. 0f063508 Sun Jan 23 14:41:04 GMT 2000 Peter Wemm <peter@FreeBSD.org> Some newbus-inspired tidy-ups. Use device_identify() rather than scanning the resource table to locate children. The 'at ppbus?' can go again. Remove a few #if Nxxx > 0' type things, config arranges this for us. Move the newbus method glue next to the DRIVER_MODULE() stuff so we don't need extra prototypes. Don't set device descriptions until after the possibility of the probe returning an error. Remove all cdevsw_add() calls, all the drivers that did this also use make_dev() correctly, so it's not required. A couple of other minor nits.
|