| /freebsd/sys/dev/ice/ |
| H A D | ice_ddp_common.c | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_ddp_common.h | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_defs.h | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_rdma_internal.h | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | irdma_di_if.m | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | irdma_if.m | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_rdma.h | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_fw_logging.c | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_fwlog.c | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_rdma.c | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_controlq.c | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_controlq.h | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_sched.h | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_features.h | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_strings.c | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_dcb.c | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_flow.h | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_lan_tx_rx.h | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | virtchnl.h | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_flow.c | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_lib.h | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_sched.c | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_switch.c | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_switch.h | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|
| H A D | ice_type.h | 9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
9c30461d Thu Aug 24 23:26:13 GMT 2023 Eric Joyner <erj@FreeBSD.org> ice(4): Update to 1.38.16-k
New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)
Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655
|