/freebsd/sys/geom/raid3/ |
H A D | g_raid3_ctl.c | a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version.
|
H A D | g_raid3.h | a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version.
|
H A D | g_raid3.c | a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version. a245a548 Sat Dec 25 19:17:47 GMT 2004 Pawel Jakub Dawidek <pjd@FreeBSD.org> - Add genid field to the metadata which will allow to improve reliability a bit. After this change, when component is disconnected because of an I/O error, it will not be connected and synchronized automatically, it will be logged as broken and skipped. Autosynchronization can occur, when component is disconnected (on orphan event) and connected again - there were no I/O error, so there is no need to not connected the component, but when there were writes while it wasn't connected, it will be synchronized. This fix cases, when component is disconnected because of I/O error and can be connected again and again. - Bump version number. - Implement backward compatibility mechanism. After this change when metadata in old version is detected, it is automatically upgraded to the new (current) version.
|