| /freebsd/usr.sbin/ppp/ |
| H A D | timer.h | b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
|
| H A D | lqr.h | b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
|
| H A D | timer.c | b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
|
| H A D | lqr.c | b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
|
| H A D | mp.c | b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
|
| H A D | hdlc.c | b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
|
| H A D | datalink.c | b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
|
| H A D | bundle.c | b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
|
| H A D | main.c | b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
b7c5748e Fri May 08 01:15:19 GMT 1998 Brian Somers <brian@FreeBSD.org> o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
|