/freebsd/sys/cddl/dev/dtrace/powerpc/ |
H A D | regset.h | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
H A D | dtrace_asm.S | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
H A D | dtrace_isa.c | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
H A D | dtrace_subr.c | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
/freebsd/sys/cddl/contrib/opensolaris/uts/powerpc/dtrace/ |
H A D | fasttrap_isa.c | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
/freebsd/cddl/contrib/opensolaris/lib/libdtrace/powerpc/ |
H A D | dt_isadep.c | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
/freebsd/sys/cddl/contrib/opensolaris/uts/powerpc/sys/ |
H A D | fasttrap_isa.h | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
/freebsd/lib/libproc/ |
H A D | proc_regs.c | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
H A D | proc_bkpt.c | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
/freebsd/sys/powerpc/aim/ |
H A D | locore32.S | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
H A D | trap_subr32.S | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
H A D | locore64.S | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
H A D | trap_subr64.S | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
/freebsd/sys/cddl/dev/profile/ |
H A D | profile.c | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
/freebsd/cddl/usr.sbin/ |
H A D | Makefile | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
/freebsd/sys/modules/dtrace/ |
H A D | Makefile | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
/freebsd/cddl/lib/libdtrace/ |
H A D | Makefile | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
/freebsd/cddl/lib/ |
H A D | Makefile | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
/freebsd/sys/cddl/contrib/opensolaris/uts/common/dtrace/ |
H A D | dtrace.c | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
/freebsd/lib/ |
H A D | Makefile | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|
/freebsd/sys/modules/ |
H A D | Makefile | c7570492 Wed Nov 07 23:45:09 GMT 2012 Justin Hibbits <jhibbits@FreeBSD.org> Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue: Some probes will display an error message along the lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
|