/freebsd/usr.sbin/ppp/ |
H A D | auth.h | cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands.
|
H A D | command.h | cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands.
|
H A D | tun.c | cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands.
|
H A D | ccp.h | cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands.
|
H A D | lcp.h | cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands.
|
H A D | ipcp.h | cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands.
|
H A D | defs.h | cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands.
|
H A D | auth.c | cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands.
|
H A D | ccp.c | cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands.
|
H A D | lcp.c | cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands.
|
H A D | datalink.c | cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands.
|
H A D | ipcp.c | cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands.
|
H A D | ppp.8 | cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands.
|
H A D | command.c | cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands. cd9647a1 Fri Apr 03 19:24:07 GMT 1998 Brian Somers <brian@FreeBSD.org> o Move default MRU, MTU, ACCMAP and OPENMODE config values into struct lcp and display them in `show lcp'. o Remove `show mru' and `show mtu' and make the data part of `show lcp'. Also merge `set m[tr]u' and `set openmode' implementations into the SetVariable function. o `set timeout' only accepts the idle timer value as an argument. o Move our lqr period into struct lcp, and create a `set lqrperiod' command. Display it in `show lcp'. o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP, CCP and IPCP levels, creating individual `set XXXretry' commands for each. They must be separate because they have different context requirements in multilink mode. o Display default config values in `show ccp'. o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and explain the new commands.
|