/dports/sysutils/u-boot-a13-olinuxino/u-boot-2021.07/arch/arm/dts/ |
H A D | r8a7790-lager.dts | 295 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 297 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 299 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 303 * IIC0/I2C0 does not appear to support fallback to GPIO.
|
/dports/sysutils/u-boot-chip/u-boot-2021.07/arch/arm/dts/ |
H A D | r8a7790-lager.dts | 295 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 297 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 299 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 303 * IIC0/I2C0 does not appear to support fallback to GPIO.
|
/dports/sysutils/u-boot-rpi4/u-boot-2021.07/arch/arm/dts/ |
H A D | r8a7790-lager.dts | 295 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 297 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 299 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 303 * IIC0/I2C0 does not appear to support fallback to GPIO.
|
/dports/sysutils/u-boot-rockpro64/u-boot-2021.07/arch/arm/dts/ |
H A D | r8a7790-lager.dts | 295 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 297 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 299 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 303 * IIC0/I2C0 does not appear to support fallback to GPIO.
|
/dports/sysutils/u-boot-sifive-fu540/u-boot-2021.07/arch/arm/dts/ |
H A D | r8a7790-lager.dts | 295 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 297 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 299 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 303 * IIC0/I2C0 does not appear to support fallback to GPIO.
|
/dports/emulators/qemu60/qemu-6.0.0/roms/u-boot/arch/arm/dts/ |
H A D | r8a7790-lager.dts | 297 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 299 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 301 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 305 * IIC0/I2C0 does not appear to support fallback to GPIO.
|
/dports/sysutils/u-boot-qemu-riscv64/u-boot-2021.07/arch/arm/dts/ |
H A D | r8a7790-lager.dts | 295 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 297 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 299 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 303 * IIC0/I2C0 does not appear to support fallback to GPIO.
|
/dports/sysutils/u-boot-qemu-arm64/u-boot-2021.07/arch/arm/dts/ |
H A D | r8a7790-lager.dts | 295 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 297 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 299 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 303 * IIC0/I2C0 does not appear to support fallback to GPIO.
|
/dports/sysutils/u-boot-qemu-arm/u-boot-2021.07/arch/arm/dts/ |
H A D | r8a7790-lager.dts | 295 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 297 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 299 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 303 * IIC0/I2C0 does not appear to support fallback to GPIO.
|
/dports/sysutils/u-boot-rpi/u-boot-2021.07/arch/arm/dts/ |
H A D | r8a7790-lager.dts | 295 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 297 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 299 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 303 * IIC0/I2C0 does not appear to support fallback to GPIO.
|
/dports/sysutils/u-boot-rpi-arm64/u-boot-2021.07/arch/arm/dts/ |
H A D | r8a7790-lager.dts | 295 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 297 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 299 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 303 * IIC0/I2C0 does not appear to support fallback to GPIO.
|
/dports/sysutils/u-boot-riotboard/u-boot-2021.07/arch/arm/dts/ |
H A D | r8a7790-lager.dts | 295 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 297 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 299 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 303 * IIC0/I2C0 does not appear to support fallback to GPIO.
|
/dports/sysutils/u-boot-rock-pi-4/u-boot-2021.07/arch/arm/dts/ |
H A D | r8a7790-lager.dts | 295 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 297 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 299 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 303 * IIC0/I2C0 does not appear to support fallback to GPIO.
|
/dports/sysutils/u-boot-rpi2/u-boot-2021.07/arch/arm/dts/ |
H A D | r8a7790-lager.dts | 295 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 297 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 299 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 303 * IIC0/I2C0 does not appear to support fallback to GPIO.
|
/dports/sysutils/u-boot-rock64/u-boot-2021.07/arch/arm/dts/ |
H A D | r8a7790-lager.dts | 295 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 297 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 299 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 303 * IIC0/I2C0 does not appear to support fallback to GPIO.
|
/dports/sysutils/u-boot-rpi3/u-boot-2021.07/arch/arm/dts/ |
H A D | r8a7790-lager.dts | 295 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 297 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 299 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 303 * IIC0/I2C0 does not appear to support fallback to GPIO.
|
/dports/sysutils/u-boot-rpi3-32/u-boot-2021.07/arch/arm/dts/ |
H A D | r8a7790-lager.dts | 295 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 297 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 299 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 303 * IIC0/I2C0 does not appear to support fallback to GPIO.
|
/dports/sysutils/atf-fvp/arm-trusted-firmware-2.5/plat/intel/soc/common/soc/ |
H A D | socfpga_system_manager.c | 55 mmio_write_32(SOCFPGA_L4_PER_SCR(I2C0), DISABLE_L4_FIREWALL); in enable_ns_peripheral_access()
|
H A D | socfpga_reset_manager.c | 27 RSTMGR_FIELD(PER1, I2C0) | in deassert_peripheral_reset()
|
/dports/sysutils/atf-sun50i_a64/arm-trusted-firmware-2.5/plat/intel/soc/common/soc/ |
H A D | socfpga_system_manager.c | 55 mmio_write_32(SOCFPGA_L4_PER_SCR(I2C0), DISABLE_L4_FIREWALL); in enable_ns_peripheral_access()
|
/dports/sysutils/atf-sun50i_h6/arm-trusted-firmware-2.5/plat/intel/soc/common/soc/ |
H A D | socfpga_system_manager.c | 55 mmio_write_32(SOCFPGA_L4_PER_SCR(I2C0), DISABLE_L4_FIREWALL); in enable_ns_peripheral_access()
|
/dports/sysutils/atf-rk3399/arm-trusted-firmware-2.5/plat/intel/soc/common/soc/ |
H A D | socfpga_system_manager.c | 55 mmio_write_32(SOCFPGA_L4_PER_SCR(I2C0), DISABLE_L4_FIREWALL); in enable_ns_peripheral_access()
|
/dports/sysutils/atf-rk3328/arm-trusted-firmware-2.5/plat/intel/soc/common/soc/ |
H A D | socfpga_system_manager.c | 55 mmio_write_32(SOCFPGA_L4_PER_SCR(I2C0), DISABLE_L4_FIREWALL); in enable_ns_peripheral_access()
|
/dports/lang/micropython/micropython-1.17/ports/teensy/ |
H A D | teensy_hal.h | 20 #define I2C0 ((I2C_TypeDef *)0x40066000) macro
|
/dports/sysutils/u-boot-olinuxino-lime/u-boot-2021.07/arch/x86/include/asm/arch-apollolake/acpi/ |
H A D | lpss.asl | 59 Device(I2C0) {
|