/freebsd/sys/contrib/device-tree/Bindings/iio/adc/ |
H A D | ti,palmas-gpadc.yaml | 13 This ADC is often used to provide channels via the io-channels
|
H A D | at91_adc.txt | 11 - atmel,adc-channels-used: Bitmask of the channels muxed and enabled for this 54 atmel,adc-channels-used = <0xff>;
|
H A D | qcom,spmi-vadc.txt | 91 calibrated with 0.625V and 1.25V reference channels, also 96 channel will be calibrated with 0V and 1.25V reference channels, 136 For compatible property "qcom,spmi-vadc" following channels, also known as 137 reference point channels, are used for result calibration and their channel 171 io-channels = <&pmic_vadc VADC_LR_MUX10_USB_ID>;
|
H A D | qcom,spmi-vadc.yaml | 61 Represents the external channels which are connected to the ADC. 62 For compatible property "qcom,spmi-vadc" following channels, also known as 63 reference point channels, are used for result calibration and their channel 115 calibrated with 0.625V and 1.25V reference channels, also 121 reference channels, also known as absolute calibration.
|
H A D | ti,tsc2046.yaml | 13 TSC2046 is a touch screen controller with 8 channels ADC. 50 The channel number. It can have up to 8 channels
|
/freebsd/sys/dev/cxgbe/firmware/ |
H A D | t4fw_cfg_uwire.txt | 136 # TP number of RX channels 146 # TP number of TX channels 316 cmask = all # access to all channels 328 cmask = all # access to all channels 340 cmask = all # access to all channels 352 cmask = all # access to all channels 369 cmask = all # access to all channels 397 cmask = all # access to all channels 419 cmask = all # access to all channels 437 cmask = all # access to all channels [all …]
|
H A D | t5fw_cfg_uwire.txt | 151 # TP number of RX channels 161 # TP number of TX channels 352 cmask = all # access to all channels 365 cmask = all # access to all channels 378 cmask = all # access to all channels 391 cmask = all # access to all channels 410 cmask = all # access to all channels 439 cmask = all # access to all channels 462 cmask = all # access to all channels 481 cmask = all # access to all channels [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/sound/ |
H A D | designware-i2s.txt | 10 - dmas: Pairs of phandle and specifier for the DMA channels that are used by 11 the core. The core expects one or two dma channels: one for transmit and
|
H A D | adi,axi-i2s.txt | 14 - dmas: Pairs of phandle and specifier for the DMA channels that are used by 15 the core. The core expects two dma channels if both transmit and receive are
|
/freebsd/sys/contrib/device-tree/Bindings/pwm/ |
H A D | pwm-st.txt | 22 - st,pwm-num-chan: Number of available PWM channels. Default is 0. 23 - st,capture-num-chan: Number of available Capture channels. Default is 0.
|
H A D | pwm-samsung.yaml | 16 PWM timer block provides 5 PWM channels (not all of them can drive physical 85 A list of PWM channels used as PWM outputs on particular platform. 86 It is an array of up to 5 elements being indices of PWM channels
|
/freebsd/sys/contrib/device-tree/Bindings/mailbox/ |
H A D | hisilicon,hi3660-mailbox.txt | 3 Hisilicon Hi3660 mailbox controller supports up to 32 channels. Messages 42 - mbox-names : Name given to channels seen in the 'mboxes' property.
|
H A D | st,stm32-ipcc.yaml | 12 It provides the signaling for N bidirectionnal channels. The number of 13 channels (N) can be read from a dedicated register.
|
/freebsd/sys/contrib/device-tree/Bindings/mux/ |
H A D | adi,adgs1408.txt | 42 io-channels = <&adc 1>; 46 channels = "out_a0", "out_a1", "test0", "test1",
|
H A D | gpio-mux.txt | 33 io-channels = <&adc 0>; 38 channels = "sync-1", "in", "out", "sync-2";
|
/freebsd/sys/dev/ata/chipsets/ |
H A D | ata-jmicron.c | 105 ctlr->channels = ctlr->chip->cfg2; in ata_jmicron_chipinit() 123 ctlr->channels = ctlr->chip->cfg2; in ata_jmicron_chipinit()
|
/freebsd/sys/contrib/device-tree/Bindings/serial/ |
H A D | qcom,msm-uartdm.txt | 4 transmit and/or receive channels can be offloaded to a dma-engine. From a 27 - dmas: Should contain dma specifiers for transmit and receive channels 28 - dma-names: Should contain "tx" for transmit and "rx" for receive channels
|
/freebsd/sys/contrib/device-tree/Bindings/iio/dac/ |
H A D | adi,ltc2688.yaml | 33 range of all channels. If not provided the internal reference is used and 91 only makes sense for toggle or dither enabled channels. If 93 assumed to be a dither capable channel. Note that multiple channels
|
/freebsd/sys/contrib/device-tree/src/arm64/rockchip/ |
H A D | rk3326-odroid-go3.dts | 26 io-channels = <&saradc 1>; 31 channels = "0", "1", "2", "3"; 36 io-channels = <&joystick_mux 0>,
|
/freebsd/sys/contrib/device-tree/Bindings/memory-controllers/ |
H A D | nvidia,tegra186-mc.yaml | 15 into four 32 bit channels to support LPDDR4 with x16 subpartitions. The MC 150 description: 5 memory controller channels and 1 for stream-id registers 169 description: 17 memory controller channels and 1 for stream-id registers 200 description: 17 memory controller channels and 1 for stream-id registers
|
/freebsd/sys/contrib/device-tree/src/arm/microchip/ |
H A D | at91-tse850-3.dts | 64 io-channels = <&dpot 0>; 71 io-channels = <&dac 0>; 92 io-channels = <&env_det 0>; 97 channels = "", "",
|
/freebsd/sys/contrib/device-tree/Bindings/dma/ |
H A D | stericsson,dma40.yaml | 148 memcpy-channels: 150 description: Array of u32 elements indicating which channels on the DMA 160 - memcpy-channels 176 memcpy-channels = <56 57 58 59 60>;
|
/freebsd/sys/contrib/device-tree/src/arm64/qcom/ |
H A D | sm8450-hdk.dts | 711 io-channels = <&pmk8350_vadc PM8350_ADC7_DIE_TEMP(1)>; 716 io-channels = <&pmk8350_vadc PM8350B_ADC7_DIE_TEMP>; 721 io-channels = <&pmk8350_vadc PMR735A_ADC7_DIE_TEMP>; 730 io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; 737 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>; 744 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>; 751 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>; 758 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; 765 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM5_100K_PU(1)>; 772 io-channels = <&pmk8350_vadc PM8350_ADC7_GPIO3_100K_PU(1)>; [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/input/ |
H A D | adc-keys.txt | 6 - io-channels: Phandle to an ADC channel 34 io-channels = <&lradc 0>;
|
/freebsd/crypto/openssh/ |
H A D | channels.c | 166 Channel **channels; member 245 sc->channels = xcalloc(sc->channels_alloc, sizeof(*sc->channels)); in channel_init_channels() 518 sc->channels = xrecallocarray(sc->channels, sc->channels_alloc, in channel_new() 816 free(sc->channels); in channel_free_all() 817 sc->channels = NULL; in channel_free_all() 2613 c = sc->channels[i]; in channel_handler() 2671 c = sc->channels[i]; in channel_before_prepare_io() 2810 sc->channels[i]->io_want = sc->channels[i]->io_ready = 0; in channel_prepare_poll() 2886 c = sc->channels[i]; in channel_after_poll() 3071 c = sc->channels[i]; in channel_output_poll() [all …]
|